Drop all backport patches that are now included in kernel 6.6.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+++ /dev/null
-From 363547d2191cbc32ca954ba75d72908712398ff2 Mon Sep 17 00:00:00 2001
-From: Andrew Davis <afd@ti.com>
-Date: Mon, 24 Oct 2022 12:34:28 -0500
-Subject: [PATCH] kbuild: Allow DTB overlays to built from .dtso named source
- files
-
-Currently DTB Overlays (.dtbo) are build from source files with the same
-extension (.dts) as the base DTs (.dtb). This may become confusing and
-even lead to wrong results. For example, a composite DTB (created from a
-base DTB and a set of overlays) might have the same name as one of the
-overlays that create it.
-
-Different files should be generated from differently named sources.
- .dtb <-> .dts
- .dtbo <-> .dtso
-
-We do not remove the ability to compile DTBO files from .dts files here,
-only add a new rule allowing the .dtso file name. The current .dts named
-overlays can be renamed with time. After all have been renamed we can
-remove the other rule.
-
-Signed-off-by: Andrew Davis <afd@ti.com>
-Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Reviewed-by: Frank Rowand <frowand.list@gmail.com>
-Tested-by: Frank Rowand <frowand.list@gmail.com>
-Link: https://lore.kernel.org/r/20221024173434.32518-2-afd@ti.com
-Signed-off-by: Rob Herring <robh@kernel.org>
----
- scripts/Makefile.lib | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/scripts/Makefile.lib
-+++ b/scripts/Makefile.lib
-@@ -408,6 +408,9 @@ $(obj)/%.dtb: $(src)/%.dts $(DTC) $(DT_T
- $(obj)/%.dtbo: $(src)/%.dts $(DTC) FORCE
- $(call if_changed_dep,dtc)
-
-+$(obj)/%.dtbo: $(src)/%.dtso $(DTC) FORCE
-+ $(call if_changed_dep,dtc)
-+
- dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
-
- # Bzip2
+++ /dev/null
-From 2c4daed9580164522859fa100128be408cc69be2 Mon Sep 17 00:00:00 2001
-From: Lorenzo Bianconi <lorenzo@kernel.org>
-Date: Sat, 5 Nov 2022 23:36:16 +0100
-Subject: [PATCH 01/19] arm64: dts: mediatek: mt7986: add support for RX
- Wireless Ethernet Dispatch
-
-Similar to TX Wireless Ethernet Dispatch, introduce RX Wireless Ethernet
-Dispatch to offload traffic received by the wlan interface to lan/wan
-one.
-
-Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
-Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 65 +++++++++++++++++++++++
- 1 file changed, 65 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -76,6 +76,47 @@
- no-map;
- reg = <0 0x4fc00000 0 0x00100000>;
- };
-+
-+ wo_emi0: wo-emi@4fd00000 {
-+ reg = <0 0x4fd00000 0 0x40000>;
-+ no-map;
-+ };
-+
-+ wo_emi1: wo-emi@4fd40000 {
-+ reg = <0 0x4fd40000 0 0x40000>;
-+ no-map;
-+ };
-+
-+ wo_ilm0: wo-ilm@151e0000 {
-+ reg = <0 0x151e0000 0 0x8000>;
-+ no-map;
-+ };
-+
-+ wo_ilm1: wo-ilm@151f0000 {
-+ reg = <0 0x151f0000 0 0x8000>;
-+ no-map;
-+ };
-+
-+ wo_data: wo-data@4fd80000 {
-+ reg = <0 0x4fd80000 0 0x240000>;
-+ no-map;
-+ };
-+
-+ wo_dlm0: wo-dlm@151e8000 {
-+ reg = <0 0x151e8000 0 0x2000>;
-+ no-map;
-+ };
-+
-+ wo_dlm1: wo-dlm@151f8000 {
-+ reg = <0 0x151f8000 0 0x2000>;
-+ no-map;
-+ };
-+
-+ wo_boot: wo-boot@15194000 {
-+ reg = <0 0x15194000 0 0x1000>;
-+ no-map;
-+ };
-+
- };
-
- timer {
-@@ -239,6 +280,11 @@
- reg = <0 0x15010000 0 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-+ memory-region = <&wo_emi0>, <&wo_ilm0>, <&wo_dlm0>,
-+ <&wo_data>, <&wo_boot>;
-+ memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
-+ "wo-data", "wo-boot";
-+ mediatek,wo-ccif = <&wo_ccif0>;
- };
-
- wed1: wed@15011000 {
-@@ -247,6 +293,25 @@
- reg = <0 0x15011000 0 0x1000>;
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
-+ memory-region = <&wo_emi1>, <&wo_ilm1>, <&wo_dlm1>,
-+ <&wo_data>, <&wo_boot>;
-+ memory-region-names = "wo-emi", "wo-ilm", "wo-dlm",
-+ "wo-data", "wo-boot";
-+ mediatek,wo-ccif = <&wo_ccif1>;
-+ };
-+
-+ wo_ccif0: syscon@151a5000 {
-+ compatible = "mediatek,mt7986-wo-ccif", "syscon";
-+ reg = <0 0x151a5000 0 0x1000>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ wo_ccif1: syscon@151ad000 {
-+ compatible = "mediatek,mt7986-wo-ccif", "syscon";
-+ reg = <0 0x151ad000 0 0x1000>;
-+ interrupt-parent = <&gic>;
-+ interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
- };
-
- eth: ethernet@15100000 {
+++ /dev/null
-From 438e53828c08cf0e8a65b61cf6ce1e4b6620551a Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:50:24 +0100
-Subject: [PATCH 02/19] arm64: dts: mt7986: harmonize device node order
-
-This arrange device tree nodes in alphabetical order.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106085034.12582-2-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 94 ++++++++++----------
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 22 ++---
- 2 files changed, 58 insertions(+), 58 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -54,6 +54,53 @@
- };
- };
-
-+&pio {
-+ uart1_pins: uart1-pins {
-+ mux {
-+ function = "uart";
-+ groups = "uart1";
-+ };
-+ };
-+
-+ uart2_pins: uart2-pins {
-+ mux {
-+ function = "uart";
-+ groups = "uart2";
-+ };
-+ };
-+
-+ wf_2g_5g_pins: wf-2g-5g-pins {
-+ mux {
-+ function = "wifi";
-+ groups = "wf_2g", "wf_5g";
-+ };
-+ conf {
-+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-+ "WF1_TOP_CLK", "WF1_TOP_DATA";
-+ drive-strength = <4>;
-+ };
-+ };
-+
-+ wf_dbdc_pins: wf-dbdc-pins {
-+ mux {
-+ function = "wifi";
-+ groups = "wf_dbdc";
-+ };
-+ conf {
-+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+ "WF0_TOP_CLK", "WF0_TOP_DATA";
-+ drive-strength = <4>;
-+ };
-+ };
-+};
-+
- &switch {
- ports {
- #address-cells = <1>;
-@@ -121,50 +168,3 @@
- pinctrl-0 = <&wf_2g_5g_pins>;
- pinctrl-1 = <&wf_dbdc_pins>;
- };
--
--&pio {
-- uart1_pins: uart1-pins {
-- mux {
-- function = "uart";
-- groups = "uart1";
-- };
-- };
--
-- uart2_pins: uart2-pins {
-- mux {
-- function = "uart";
-- groups = "uart2";
-- };
-- };
--
-- wf_2g_5g_pins: wf-2g-5g-pins {
-- mux {
-- function = "wifi";
-- groups = "wf_2g", "wf_5g";
-- };
-- conf {
-- pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-- "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-- "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-- "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-- "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-- "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-- "WF1_TOP_CLK", "WF1_TOP_DATA";
-- drive-strength = <4>;
-- };
-- };
--
-- wf_dbdc_pins: wf-dbdc-pins {
-- mux {
-- function = "wifi";
-- groups = "wf_dbdc";
-- };
-- conf {
-- pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-- "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-- "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-- "WF0_TOP_CLK", "WF0_TOP_DATA";
-- drive-strength = <4>;
-- };
-- };
--};
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -25,10 +25,6 @@
- };
- };
-
--&uart0 {
-- status = "okay";
--};
--
- ð {
- status = "okay";
-
-@@ -99,13 +95,6 @@
- };
- };
-
--&wifi {
-- status = "okay";
-- pinctrl-names = "default", "dbdc";
-- pinctrl-0 = <&wf_2g_5g_pins>;
-- pinctrl-1 = <&wf_dbdc_pins>;
--};
--
- &pio {
- wf_2g_5g_pins: wf-2g-5g-pins {
- mux {
-@@ -138,3 +127,14 @@
- };
- };
- };
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&wifi {
-+ status = "okay";
-+ pinctrl-names = "default", "dbdc";
-+ pinctrl-0 = <&wf_2g_5g_pins>;
-+ pinctrl-1 = <&wf_dbdc_pins>;
-+};
+++ /dev/null
-From ffb05357b47f06b2b4d1e14ba89169e28feb727b Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:50:27 +0100
-Subject: [PATCH 03/19] arm64: dts: mt7986: add crypto related device nodes
-
-This patch adds crypto engine support for MT7986.
-
-Signed-off-by: Vic Wu <vic.wu@mediatek.com>
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20221106085034.12582-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 4 ++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 15 +++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 4 ++++
- 3 files changed, 23 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -25,6 +25,10 @@
- };
- };
-
-+&crypto {
-+ status = "okay";
-+};
-+
- ð {
- status = "okay";
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -223,6 +223,21 @@
- status = "disabled";
- };
-
-+ crypto: crypto@10320000 {
-+ compatible = "inside-secure,safexcel-eip97";
-+ reg = <0 0x10320000 0 0x40000>;
-+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "ring0", "ring1", "ring2", "ring3";
-+ clocks = <&infracfg CLK_INFRA_EIP97_CK>;
-+ clock-names = "infra_eip97_ck";
-+ assigned-clocks = <&topckgen CLK_TOP_EIP_B_SEL>;
-+ assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>;
-+ status = "disabled";
-+ };
-+
- uart0: serial@11002000 {
- compatible = "mediatek,mt7986-uart",
- "mediatek,mt6577-uart";
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -25,6 +25,10 @@
- };
- };
-
-+&crypto {
-+ status = "okay";
-+};
-+
- ð {
- status = "okay";
-
+++ /dev/null
-From b49b7dc404ded1d89cbc568d875009a5c1ed4ef6 Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 6 Nov 2022 09:50:29 +0100
-Subject: [PATCH 04/19] arm64: dts: mt7986: add i2c node
-
-Add i2c Node to mt7986 devicetree.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20221106085034.12582-7-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -279,6 +279,20 @@
- status = "disabled";
- };
-
-+ i2c0: i2c@11008000 {
-+ compatible = "mediatek,mt7986-i2c";
-+ reg = <0 0x11008000 0 0x90>,
-+ <0 0x10217080 0 0x80>;
-+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+ clock-div = <5>;
-+ clocks = <&infracfg CLK_INFRA_I2C0_CK>,
-+ <&infracfg CLK_INFRA_AP_DMA_CK>;
-+ clock-names = "main", "dma";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ status = "disabled";
-+ };
-+
- ethsys: syscon@15000000 {
- #address-cells = <1>;
- #size-cells = <1>;
+++ /dev/null
-From 2cd6022800d6da7822e169f3e6f7f790c1431445 Mon Sep 17 00:00:00 2001
-From: Matthias Brugger <mbrugger@suse.com>
-Date: Mon, 14 Nov 2022 13:16:53 +0100
-Subject: [PATCH 05/19] arm64: dts: mediatek: mt7986: Add SoC compatible
-
-Missing SoC compatible in the board file causes dt bindings check.
-
-Signed-off-by: Matthias Brugger <mbrugger@suse.com>
-Link: https://lore.kernel.org/r/20221114121653.14739-1-matthias.bgg@kernel.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 2 +-
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 1 +
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 2 +-
- arch/arm64/boot/dts/mediatek/mt7986b.dtsi | 3 +++
- 4 files changed, 6 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -9,7 +9,7 @@
-
- / {
- model = "MediaTek MT7986a RFB";
-- compatible = "mediatek,mt7986a-rfb";
-+ compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
-
- aliases {
- serial0 = &uart0;
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -10,6 +10,7 @@
- #include <dt-bindings/reset/mt7986-resets.h>
-
- / {
-+ compatible = "mediatek,mt7986a";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -9,7 +9,7 @@
-
- / {
- model = "MediaTek MT7986b RFB";
-- compatible = "mediatek,mt7986b-rfb";
-+ compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
-
- aliases {
- serial0 = &uart0;
---- a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
-@@ -5,6 +5,9 @@
- */
-
- #include "mt7986a.dtsi"
-+/ {
-+ compatible = "mediatek,mt7986b";
-+};
-
- &pio {
- compatible = "mediatek,mt7986b-pinctrl";
+++ /dev/null
-From f4029538f063a845dc9aae46cce4cf386e6253a5 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 18 Nov 2022 20:01:21 +0100
-Subject: [PATCH 06/19] arm64: dts: mt7986: add spi related device nodes
-
-This patch adds spi support for MT7986.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221118190126.100895-7-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 35 ++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 28 ++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 35 ++++++++++++++++++++
- 3 files changed, 98 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -59,6 +59,20 @@
- };
-
- &pio {
-+ spi_flash_pins: spi-flash-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spi0", "spi0_wp_hold";
-+ };
-+ };
-+
-+ spic_pins: spic-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spi1_2";
-+ };
-+ };
-+
- uart1_pins: uart1-pins {
- mux {
- function = "uart";
-@@ -105,6 +119,27 @@
- };
- };
-
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi_flash_pins>;
-+ cs-gpios = <0>, <0>;
-+ status = "okay";
-+ spi_nand: spi_nand@0 {
-+ compatible = "spi-nand";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+ spi-tx-bus-width = <4>;
-+ spi-rx-bus-width = <4>;
-+ };
-+};
-+
-+&spi1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spic_pins>;
-+ cs-gpios = <0>, <0>;
-+ status = "okay";
-+};
-+
- &switch {
- ports {
- #address-cells = <1>;
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -294,6 +294,34 @@
- status = "disabled";
- };
-
-+ spi0: spi@1100a000 {
-+ compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0 0x1100a000 0 0x100>;
-+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&topckgen CLK_TOP_MPLL_D2>,
-+ <&topckgen CLK_TOP_SPI_SEL>,
-+ <&infracfg CLK_INFRA_SPI0_CK>,
-+ <&infracfg CLK_INFRA_SPI0_HCK_CK>;
-+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
-+ status = "disabled";
-+ };
-+
-+ spi1: spi@1100b000 {
-+ compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0 0x1100b000 0 0x100>;
-+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&topckgen CLK_TOP_MPLL_D2>,
-+ <&topckgen CLK_TOP_SPIM_MST_SEL>,
-+ <&infracfg CLK_INFRA_SPI1_CK>,
-+ <&infracfg CLK_INFRA_SPI1_HCK_CK>;
-+ clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
-+ status = "disabled";
-+ };
-+
- ethsys: syscon@15000000 {
- #address-cells = <1>;
- #size-cells = <1>;
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -100,6 +100,20 @@
- };
-
- &pio {
-+ spi_flash_pins: spi-flash-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spi0", "spi0_wp_hold";
-+ };
-+ };
-+
-+ spic_pins: spic-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spi1_2";
-+ };
-+ };
-+
- wf_2g_5g_pins: wf-2g-5g-pins {
- mux {
- function = "wifi";
-@@ -132,6 +146,27 @@
- };
- };
-
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi_flash_pins>;
-+ cs-gpios = <0>, <0>;
-+ status = "okay";
-+ spi_nand: spi_nand@0 {
-+ compatible = "spi-nand";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+ spi-tx-bus-width = <4>;
-+ spi-rx-bus-width = <4>;
-+ };
-+};
-+
-+&spi1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spic_pins>;
-+ cs-gpios = <0>, <0>;
-+ status = "okay";
-+};
-+
- &uart0 {
- status = "okay";
- };
+++ /dev/null
-From 9e8e24ab716098e617195ce29b88e84608bf2108 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 6 Jan 2023 16:28:42 +0100
-Subject: [PATCH 07/19] arm64: dts: mt7986: add usb related device nodes
-
-This patch adds USB support for MT7986.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
-Link: https://lore.kernel.org/r/20230106152845.88717-3-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 8 +++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 55 ++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 8 +++
- 3 files changed, 71 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -140,6 +140,10 @@
- status = "okay";
- };
-
-+&ssusb {
-+ status = "okay";
-+};
-+
- &switch {
- ports {
- #address-cells = <1>;
-@@ -201,6 +205,10 @@
- status = "okay";
- };
-
-+&usb_phy {
-+ status = "okay";
-+};
-+
- &wifi {
- status = "okay";
- pinctrl-names = "default", "dbdc";
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -322,6 +322,61 @@
- status = "disabled";
- };
-
-+ ssusb: usb@11200000 {
-+ compatible = "mediatek,mt7986-xhci",
-+ "mediatek,mtk-xhci";
-+ reg = <0 0x11200000 0 0x2e00>,
-+ <0 0x11203e00 0 0x0100>;
-+ reg-names = "mac", "ippc";
-+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&infracfg CLK_INFRA_IUSB_SYS_CK>,
-+ <&infracfg CLK_INFRA_IUSB_CK>,
-+ <&infracfg CLK_INFRA_IUSB_133_CK>,
-+ <&infracfg CLK_INFRA_IUSB_66M_CK>,
-+ <&topckgen CLK_TOP_U2U3_XHCI_SEL>;
-+ clock-names = "sys_ck",
-+ "ref_ck",
-+ "mcu_ck",
-+ "dma_ck",
-+ "xhci_ck";
-+ phys = <&u2port0 PHY_TYPE_USB2>,
-+ <&u3port0 PHY_TYPE_USB3>,
-+ <&u2port1 PHY_TYPE_USB2>;
-+ status = "disabled";
-+ };
-+
-+ usb_phy: t-phy@11e10000 {
-+ compatible = "mediatek,mt7986-tphy",
-+ "mediatek,generic-tphy-v2";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0 0 0x11e10000 0x1700>;
-+ status = "disabled";
-+
-+ u2port0: usb-phy@0 {
-+ reg = <0x0 0x700>;
-+ clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
-+ <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
-+ clock-names = "ref", "da_ref";
-+ #phy-cells = <1>;
-+ };
-+
-+ u3port0: usb-phy@700 {
-+ reg = <0x700 0x900>;
-+ clocks = <&topckgen CLK_TOP_USB3_PHY_SEL>;
-+ clock-names = "ref";
-+ #phy-cells = <1>;
-+ };
-+
-+ u2port1: usb-phy@1000 {
-+ reg = <0x1000 0x700>;
-+ clocks = <&topckgen CLK_TOP_DA_U2_REFSEL>,
-+ <&topckgen CLK_TOP_DA_U2_CK_1P_SEL>;
-+ clock-names = "ref", "da_ref";
-+ #phy-cells = <1>;
-+ };
-+ };
-+
- ethsys: syscon@15000000 {
- #address-cells = <1>;
- #size-cells = <1>;
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -167,10 +167,18 @@
- status = "okay";
- };
-
-+&ssusb {
-+ status = "okay";
-+};
-+
- &uart0 {
- status = "okay";
- };
-
-+&usb_phy {
-+ status = "okay";
-+};
-+
- &wifi {
- status = "okay";
- pinctrl-names = "default", "dbdc";
+++ /dev/null
-From c1744e9e75a6a8abc7c893f349bcbf725b9c0d74 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 6 Jan 2023 16:28:43 +0100
-Subject: [PATCH 08/19] arm64: dts: mt7986: add mmc related device nodes
-
-This patch adds mmc support for MT7986.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230106152845.88717-4-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 96 ++++++++++++++++++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 15 +++
- 2 files changed, 111 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -5,6 +5,8 @@
- */
-
- /dts-v1/;
-+#include <dt-bindings/pinctrl/mt65xx.h>
-+
- #include "mt7986a.dtsi"
-
- / {
-@@ -23,6 +25,24 @@
- device_type = "memory";
- reg = <0 0x40000000 0 0x40000000>;
- };
-+
-+ reg_1p8v: regulator-1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-1.8V";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "fixed-3.3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
- };
-
- &crypto {
-@@ -58,7 +78,83 @@
- };
- };
-
-+&mmc0 {
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&mmc0_pins_default>;
-+ pinctrl-1 = <&mmc0_pins_uhs>;
-+ bus-width = <8>;
-+ max-frequency = <200000000>;
-+ cap-mmc-highspeed;
-+ mmc-hs200-1_8v;
-+ mmc-hs400-1_8v;
-+ hs400-ds-delay = <0x14014>;
-+ vmmc-supply = <®_3p3v>;
-+ vqmmc-supply = <®_1p8v>;
-+ non-removable;
-+ no-sd;
-+ no-sdio;
-+ status = "okay";
-+};
-+
- &pio {
-+ mmc0_pins_default: mmc0-pins {
-+ mux {
-+ function = "emmc";
-+ groups = "emmc_51";
-+ };
-+ conf-cmd-dat {
-+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+ input-enable;
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ conf-clk {
-+ pins = "EMMC_CK";
-+ drive-strength = <6>;
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-ds {
-+ pins = "EMMC_DSL";
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-rst {
-+ pins = "EMMC_RSTB";
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ };
-+
-+ mmc0_pins_uhs: mmc0-uhs-pins {
-+ mux {
-+ function = "emmc";
-+ groups = "emmc_51";
-+ };
-+ conf-cmd-dat {
-+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+ input-enable;
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ conf-clk {
-+ pins = "EMMC_CK";
-+ drive-strength = <6>;
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-ds {
-+ pins = "EMMC_DSL";
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-rst {
-+ pins = "EMMC_RSTB";
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ };
-+
- spi_flash_pins: spi-flash-pins {
- mux {
- function = "spi";
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -345,6 +345,21 @@
- status = "disabled";
- };
-
-+ mmc0: mmc@11230000 {
-+ compatible = "mediatek,mt7986-mmc";
-+ reg = <0 0x11230000 0 0x1000>,
-+ <0 0x11c20000 0 0x1000>;
-+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&topckgen CLK_TOP_EMMC_416M_SEL>,
-+ <&infracfg CLK_INFRA_MSDC_HCK_CK>,
-+ <&infracfg CLK_INFRA_MSDC_CK>,
-+ <&infracfg CLK_INFRA_MSDC_133M_CK>,
-+ <&infracfg CLK_INFRA_MSDC_66M_CK>;
-+ clock-names = "source", "hclk", "source_cg", "bus_clk",
-+ "sys_cg";
-+ status = "disabled";
-+ };
-+
- usb_phy: t-phy@11e10000 {
- compatible = "mediatek,mt7986-tphy",
- "mediatek,generic-tphy-v2";
+++ /dev/null
-From 87a42ef1d6cf602e4aa40555b4404cad6149a90f Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Fri, 6 Jan 2023 16:28:44 +0100
-Subject: [PATCH 09/19] arm64: dts: mt7986: add pcie related device nodes
-
-This patch adds PCIe support for MT7986.
-
-Signed-off-by: Jieyy Yang <jieyy.yang@mediatek.com>
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230106152845.88717-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 16 ++++++
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 52 ++++++++++++++++++++
- 2 files changed, 68 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -93,6 +93,15 @@
- non-removable;
- no-sd;
- no-sdio;
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie_pins>;
-+ status = "okay";
-+};
-+
-+&pcie_phy {
- status = "okay";
- };
-
-@@ -155,6 +164,13 @@
- };
- };
-
-+ pcie_pins: pcie-pins {
-+ mux {
-+ function = "pcie";
-+ groups = "pcie_clk", "pcie_wake", "pcie_pereset";
-+ };
-+ };
-+
- spi_flash_pins: spi-flash-pins {
- mux {
- function = "spi";
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -8,6 +8,7 @@
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/clock/mt7986-clk.h>
- #include <dt-bindings/reset/mt7986-resets.h>
-+#include <dt-bindings/phy/phy.h>
-
- / {
- compatible = "mediatek,mt7986a";
-@@ -360,6 +361,57 @@
- status = "disabled";
- };
-
-+ pcie: pcie@11280000 {
-+ compatible = "mediatek,mt7986-pcie",
-+ "mediatek,mt8192-pcie";
-+ device_type = "pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ reg = <0x00 0x11280000 0x00 0x4000>;
-+ reg-names = "pcie-mac";
-+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-+ bus-range = <0x00 0xff>;
-+ ranges = <0x82000000 0x00 0x20000000 0x00
-+ 0x20000000 0x00 0x10000000>;
-+ clocks = <&infracfg CLK_INFRA_IPCIE_PIPE_CK>,
-+ <&infracfg CLK_INFRA_IPCIE_CK>,
-+ <&infracfg CLK_INFRA_IPCIER_CK>,
-+ <&infracfg CLK_INFRA_IPCIEB_CK>;
-+ clock-names = "pl_250m", "tl_26m", "peri_26m", "top_133m";
-+ status = "disabled";
-+
-+ phys = <&pcie_port PHY_TYPE_PCIE>;
-+ phy-names = "pcie-phy";
-+
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 0x7>;
-+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
-+ <0 0 0 2 &pcie_intc 1>,
-+ <0 0 0 3 &pcie_intc 2>,
-+ <0 0 0 4 &pcie_intc 3>;
-+ pcie_intc: interrupt-controller {
-+ #address-cells = <0>;
-+ #interrupt-cells = <1>;
-+ interrupt-controller;
-+ };
-+ };
-+
-+ pcie_phy: t-phy@11c00000 {
-+ compatible = "mediatek,mt7986-tphy",
-+ "mediatek,generic-tphy-v2";
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+ status = "disabled";
-+
-+ pcie_port: pcie-phy@11c00000 {
-+ reg = <0 0x11c00000 0 0x20000>;
-+ clocks = <&clk40m>;
-+ clock-names = "ref";
-+ #phy-cells = <1>;
-+ };
-+ };
-+
- usb_phy: t-phy@11e10000 {
- compatible = "mediatek,mt7986-tphy",
- "mediatek,generic-tphy-v2";
+++ /dev/null
-From a751f7412e0098801673b80bc7a4738ae7d710ce Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Fri, 6 Jan 2023 16:28:45 +0100
-Subject: [PATCH 10/19] arm64: dts: mt7986: add Bananapi R3
-
-Add support for Bananapi R3 SBC.
-
-- SD/eMMC support (switching first 4 bits of data-bus with sw6/D)
-- SPI-NAND/NOR support (switched CS by sw5/C)
-- all rj45 ports and both SFP working (eth1/lan4)
-- all USB-Ports + SIM-Slot tested
-- i2c and all uarts tested
-- wifi tested (with eeprom calibration data)
-
-The device can boot from all 4 storage options. Both, SPI and MMC, can
-be switched using hardware switches on the board, see
-https://wiki.banana-pi.org/Banana_Pi_BPI-R3#Jumper_setting
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230106152845.88717-6-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/Makefile | 5 +
- .../mt7986a-bananapi-bpi-r3-emmc.dtso | 29 ++
- .../mt7986a-bananapi-bpi-r3-nand.dtso | 55 +++
- .../mediatek/mt7986a-bananapi-bpi-r3-nor.dtso | 68 +++
- .../mediatek/mt7986a-bananapi-bpi-r3-sd.dtso | 23 +
- .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 450 ++++++++++++++++++
- 6 files changed, 630 insertions(+)
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
- create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-
---- a/arch/arm64/boot/dts/mediatek/Makefile
-+++ b/arch/arm64/boot/dts/mediatek/Makefile
-@@ -7,6 +7,11 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-ev
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
-+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-emmc.dtso
-@@ -0,0 +1,29 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Copyright (C) 2021 MediaTek Inc.
-+ * Author: Sam.Shih <sam.shih@mediatek.com>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+ fragment@0 {
-+ target-path = "/soc/mmc@11230000";
-+ __overlay__ {
-+ bus-width = <8>;
-+ max-frequency = <200000000>;
-+ cap-mmc-highspeed;
-+ mmc-hs200-1_8v;
-+ mmc-hs400-1_8v;
-+ hs400-ds-delay = <0x14014>;
-+ non-removable;
-+ no-sd;
-+ no-sdio;
-+ status = "okay";
-+ };
-+ };
-+};
-+
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-@@ -0,0 +1,55 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
-+/*
-+ * Authors: Daniel Golle <daniel@makrotopia.org>
-+ * Frank Wunderlich <frank-w@public-files.de>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+ fragment@0 {
-+ target-path = "/soc/spi@1100a000";
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ spi_nand: spi_nand@0 {
-+ compatible = "spi-nand";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+ spi-tx-bus-width = <4>;
-+ spi-rx-bus-width = <4>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "bl2";
-+ reg = <0x0 0x80000>;
-+ read-only;
-+ };
-+
-+ partition@80000 {
-+ label = "reserved";
-+ reg = <0x80000 0x300000>;
-+ };
-+
-+ partition@380000 {
-+ label = "fip";
-+ reg = <0x380000 0x200000>;
-+ read-only;
-+ };
-+
-+ partition@580000 {
-+ label = "ubi";
-+ reg = <0x580000 0x7a80000>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
-@@ -0,0 +1,68 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
-+/*
-+ * Authors: Daniel Golle <daniel@makrotopia.org>
-+ * Frank Wunderlich <frank-w@public-files.de>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+ fragment@0 {
-+ target-path = "/soc/spi@1100a000";
-+ __overlay__ {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ flash@0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <10000000>;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "bl2";
-+ reg = <0x0 0x20000>;
-+ read-only;
-+ };
-+
-+ partition@20000 {
-+ label = "reserved";
-+ reg = <0x20000 0x20000>;
-+ };
-+
-+ partition@40000 {
-+ label = "u-boot-env";
-+ reg = <0x40000 0x40000>;
-+ };
-+
-+ partition@80000 {
-+ label = "reserved2";
-+ reg = <0x80000 0x80000>;
-+ };
-+
-+ partition@100000 {
-+ label = "fip";
-+ reg = <0x100000 0x80000>;
-+ read-only;
-+ };
-+
-+ partition@180000 {
-+ label = "recovery";
-+ reg = <0x180000 0xa80000>;
-+ };
-+
-+ partition@c00000 {
-+ label = "fit";
-+ reg = <0xc00000 0x1400000>;
-+ };
-+ };
-+ };
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-sd.dtso
-@@ -0,0 +1,23 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Copyright (C) 2021 MediaTek Inc.
-+ * Author: Sam.Shih <sam.shih@mediatek.com>
-+ */
-+
-+/dts-v1/;
-+/plugin/;
-+
-+/ {
-+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+ fragment@0 {
-+ target-path = "/soc/mmc@11230000";
-+ __overlay__ {
-+ bus-width = <4>;
-+ max-frequency = <52000000>;
-+ cap-sd-highspeed;
-+ status = "okay";
-+ };
-+ };
-+};
-+
---- /dev/null
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -0,0 +1,450 @@
-+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
-+/*
-+ * Copyright (C) 2021 MediaTek Inc.
-+ * Authors: Sam.Shih <sam.shih@mediatek.com>
-+ * Frank Wunderlich <frank-w@public-files.de>
-+ * Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/mt65xx.h>
-+
-+#include "mt7986a.dtsi"
-+
-+/ {
-+ model = "Bananapi BPI-R3";
-+ compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ ethernet0 = &gmac0;
-+ ethernet1 = &gmac1;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ dcin: regulator-12vd {
-+ compatible = "regulator-fixed";
-+ regulator-name = "12vd";
-+ regulator-min-microvolt = <12000000>;
-+ regulator-max-microvolt = <12000000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ };
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+
-+ reset-key {
-+ label = "reset";
-+ linux,code = <KEY_RESTART>;
-+ gpios = <&pio 9 GPIO_ACTIVE_LOW>;
-+ };
-+
-+ wps-key {
-+ label = "wps";
-+ linux,code = <KEY_WPS_BUTTON>;
-+ gpios = <&pio 10 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+
-+ /* i2c of the left SFP cage (wan) */
-+ i2c_sfp1: i2c-gpio-0 {
-+ compatible = "i2c-gpio";
-+ sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+ scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+ i2c-gpio,delay-us = <2>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ /* i2c of the right SFP cage (lan) */
-+ i2c_sfp2: i2c-gpio-1 {
-+ compatible = "i2c-gpio";
-+ sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+ scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-+ i2c-gpio,delay-us = <2>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ green_led: led-0 {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_POWER;
-+ gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
-+ default-state = "on";
-+ };
-+
-+ blue_led: led-1 {
-+ color = <LED_COLOR_ID_BLUE>;
-+ function = LED_FUNCTION_STATUS;
-+ gpios = <&pio 86 GPIO_ACTIVE_HIGH>;
-+ default-state = "off";
-+ };
-+ };
-+
-+ reg_1p8v: regulator-1p8v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "1.8vd";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ vin-supply = <&dcin>;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3.3vd";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-boot-on;
-+ regulator-always-on;
-+ vin-supply = <&dcin>;
-+ };
-+
-+ /* left SFP cage (wan) */
-+ sfp1: sfp-1 {
-+ compatible = "sff,sfp";
-+ i2c-bus = <&i2c_sfp1>;
-+ los-gpios = <&pio 46 GPIO_ACTIVE_HIGH>;
-+ mod-def0-gpios = <&pio 49 GPIO_ACTIVE_LOW>;
-+ tx-disable-gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
-+ tx-fault-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ /* right SFP cage (lan) */
-+ sfp2: sfp-2 {
-+ compatible = "sff,sfp";
-+ i2c-bus = <&i2c_sfp2>;
-+ los-gpios = <&pio 31 GPIO_ACTIVE_HIGH>;
-+ mod-def0-gpios = <&pio 47 GPIO_ACTIVE_LOW>;
-+ tx-disable-gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
-+ tx-fault-gpios = <&pio 48 GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+&crypto {
-+ status = "okay";
-+};
-+
-+ð {
-+ status = "okay";
-+
-+ gmac0: mac@0 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <2500>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+
-+ gmac1: mac@1 {
-+ compatible = "mediatek,eth-mac";
-+ reg = <1>;
-+ phy-mode = "2500base-x";
-+ sfp = <&sfp1>;
-+ managed = "in-band-status";
-+ };
-+
-+ mdio: mdio-bus {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+};
-+
-+&mdio {
-+ switch: switch@1f {
-+ compatible = "mediatek,mt7531";
-+ reg = <31>;
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
-+ reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default", "state_uhs";
-+ pinctrl-0 = <&mmc0_pins_default>;
-+ pinctrl-1 = <&mmc0_pins_uhs>;
-+ vmmc-supply = <®_3p3v>;
-+ vqmmc-supply = <®_1p8v>;
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c_pins>;
-+ status = "okay";
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie_pins>;
-+ status = "okay";
-+};
-+
-+&pcie_phy {
-+ status = "okay";
-+};
-+
-+&pio {
-+ i2c_pins: i2c-pins {
-+ mux {
-+ function = "i2c";
-+ groups = "i2c";
-+ };
-+ };
-+
-+ mmc0_pins_default: mmc0-pins {
-+ mux {
-+ function = "emmc";
-+ groups = "emmc_51";
-+ };
-+ conf-cmd-dat {
-+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+ input-enable;
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ conf-clk {
-+ pins = "EMMC_CK";
-+ drive-strength = <6>;
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-ds {
-+ pins = "EMMC_DSL";
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-rst {
-+ pins = "EMMC_RSTB";
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ };
-+
-+ mmc0_pins_uhs: mmc0-uhs-pins {
-+ mux {
-+ function = "emmc";
-+ groups = "emmc_51";
-+ };
-+ conf-cmd-dat {
-+ pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
-+ "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
-+ "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
-+ input-enable;
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ conf-clk {
-+ pins = "EMMC_CK";
-+ drive-strength = <6>;
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-ds {
-+ pins = "EMMC_DSL";
-+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>; /* pull-down 50K */
-+ };
-+ conf-rst {
-+ pins = "EMMC_RSTB";
-+ drive-strength = <4>;
-+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>; /* pull-up 10K */
-+ };
-+ };
-+
-+ pcie_pins: pcie-pins {
-+ mux {
-+ function = "pcie";
-+ groups = "pcie_clk", "pcie_pereset";
-+ };
-+ };
-+
-+ spi_flash_pins: spi-flash-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spi0", "spi0_wp_hold";
-+ };
-+ };
-+
-+ spic_pins: spic-pins {
-+ mux {
-+ function = "spi";
-+ groups = "spi1_0";
-+ };
-+ };
-+
-+ uart1_pins: uart1-pins {
-+ mux {
-+ function = "uart";
-+ groups = "uart1_rx_tx";
-+ };
-+ };
-+
-+ uart2_pins: uart2-pins {
-+ mux {
-+ function = "uart";
-+ groups = "uart2_0_rx_tx";
-+ };
-+ };
-+
-+ wf_2g_5g_pins: wf-2g-5g-pins {
-+ mux {
-+ function = "wifi";
-+ groups = "wf_2g", "wf_5g";
-+ };
-+ conf {
-+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-+ "WF1_TOP_CLK", "WF1_TOP_DATA";
-+ drive-strength = <4>;
-+ };
-+ };
-+
-+ wf_dbdc_pins: wf-dbdc-pins {
-+ mux {
-+ function = "wifi";
-+ groups = "wf_dbdc";
-+ };
-+ conf {
-+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
-+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
-+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
-+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
-+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
-+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
-+ "WF1_TOP_CLK", "WF1_TOP_DATA";
-+ drive-strength = <4>;
-+ };
-+ };
-+
-+ wf_led_pins: wf-led-pins {
-+ mux {
-+ function = "led";
-+ groups = "wifi_led";
-+ };
-+ };
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi_flash_pins>;
-+ status = "okay";
-+};
-+
-+&spi1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spic_pins>;
-+ status = "okay";
-+};
-+
-+&ssusb {
-+ status = "okay";
-+};
-+
-+&switch {
-+ ports {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ port@0 {
-+ reg = <0>;
-+ label = "wan";
-+ };
-+
-+ port@1 {
-+ reg = <1>;
-+ label = "lan0";
-+ };
-+
-+ port@2 {
-+ reg = <2>;
-+ label = "lan1";
-+ };
-+
-+ port@3 {
-+ reg = <3>;
-+ label = "lan2";
-+ };
-+
-+ port@4 {
-+ reg = <4>;
-+ label = "lan3";
-+ };
-+
-+ port5: port@5 {
-+ reg = <5>;
-+ label = "lan4";
-+ phy-mode = "2500base-x";
-+ sfp = <&sfp2>;
-+ managed = "in-band-status";
-+ };
-+
-+ port@6 {
-+ reg = <6>;
-+ label = "cpu";
-+ ethernet = <&gmac0>;
-+ phy-mode = "2500base-x";
-+
-+ fixed-link {
-+ speed = <2500>;
-+ full-duplex;
-+ pause;
-+ };
-+ };
-+ };
-+};
-+
-+&trng {
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1_pins>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart2_pins>;
-+ status = "okay";
-+};
-+
-+&usb_phy {
-+ status = "okay";
-+};
-+
-+&watchdog {
-+ status = "okay";
-+};
-+
-+&wifi {
-+ status = "okay";
-+ pinctrl-names = "default", "dbdc";
-+ pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
-+ pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
-+};
-+
+++ /dev/null
-From 4c2d5411f4b101f7aa0fd74f80109e3afd6dc967 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Wed, 17 May 2023 12:11:08 +0200
-Subject: [PATCH 11/19] arm64: mediatek: Propagate chassis-type where possible
-
-The chassis-type string identifies the form-factor of the system:
-add this property to all device trees of devices for which the form
-factor is known.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230517101108.205654-1-angelogioacchino.delregno@collabora.com
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt6755-evb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt6779-evb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt6795-evb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt6797-evb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-elm.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-evb.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts | 1 +
- .../boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts | 1 +
- arch/arm64/boot/dts/mediatek/mt8186-evb.dts | 1 +
- 28 files changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
-@@ -11,6 +11,7 @@
-
- / {
- model = "MediaTek MT2712 evaluation board";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt2712-evb", "mediatek,mt2712";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6755-evb.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "MediaTek MT6755 EVB";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt6755-evb", "mediatek,mt6755";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6779-evb.dts
-@@ -10,6 +10,7 @@
-
- / {
- model = "MediaTek MT6779 EVB";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt6779-evb", "mediatek,mt6779";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6795-evb.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "MediaTek MT6795 Evaluation Board";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt6795-evb", "mediatek,mt6795";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6797-evb.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "MediaTek MT6797 Evaluation Board";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
-@@ -12,6 +12,7 @@
-
- / {
- model = "Mediatek X20 Development Board";
-+ chassis-type = "embedded";
- compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -15,6 +15,7 @@
-
- / {
- model = "Bananapi BPI-R64";
-+ chassis-type = "embedded";
- compatible = "bananapi,bpi-r64", "mediatek,mt7622";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
-@@ -15,6 +15,7 @@
-
- / {
- model = "MediaTek MT7622 RFB1 board";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -16,6 +16,7 @@
-
- / {
- model = "Bananapi BPI-R3";
-+ chassis-type = "embedded";
- compatible = "bananapi,bpi-r3", "mediatek,mt7986a";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
-@@ -11,6 +11,7 @@
-
- / {
- model = "MediaTek MT7986a RFB";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt7986a-rfb", "mediatek,mt7986a";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "MediaTek MT7986b RFB";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt7986b-rfb", "mediatek,mt7986b";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8167-pumpkin.dts
-@@ -11,6 +11,7 @@
-
- / {
- model = "Pumpkin MT8167";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt8167-pumpkin", "mediatek,mt8167";
-
- memory@40000000 {
---- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana-rev7.dts
-@@ -8,6 +8,7 @@
-
- / {
- model = "Google Hanawl";
-+ chassis-type = "laptop";
- compatible = "google,hana-rev7", "mediatek,mt8173";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm-hana.dts
-@@ -8,6 +8,7 @@
-
- / {
- model = "Google Hana";
-+ chassis-type = "laptop";
- compatible = "google,hana-rev6", "google,hana-rev5",
- "google,hana-rev4", "google,hana-rev3",
- "google,hana", "mediatek,mt8173";
---- a/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-elm.dts
-@@ -8,6 +8,7 @@
-
- / {
- model = "Google Elm";
-+ chassis-type = "laptop";
- compatible = "google,elm-rev8", "google,elm-rev7", "google,elm-rev6",
- "google,elm-rev5", "google,elm-rev4", "google,elm-rev3",
- "google,elm", "mediatek,mt8173";
---- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
-@@ -10,6 +10,7 @@
-
- / {
- model = "MediaTek MT8173 evaluation board";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt8173-evb", "mediatek,mt8173";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-evb.dts
-@@ -11,6 +11,7 @@
-
- / {
- model = "MediaTek MT8183 evaluation board";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt8183-evb", "mediatek,mt8183";
-
- aliases {
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "Google burnet board";
-+ chassis-type = "convertible";
- compatible = "google,burnet", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "Google damu board";
-+ chassis-type = "convertible";
- compatible = "google,damu", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "Google juniper sku16 board";
-+ chassis-type = "convertible";
- compatible = "google,juniper-sku16", "google,juniper", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu-sku22.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "MediaTek kakadu board sku22";
-+ chassis-type = "tablet";
- compatible = "google,kakadu-rev3-sku22", "google,kakadu-rev2-sku22",
- "google,kakadu", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts
-@@ -9,6 +9,7 @@
-
- / {
- model = "MediaTek kakadu board";
-+ chassis-type = "tablet";
- compatible = "google,kakadu-rev3", "google,kakadu-rev2",
- "google,kakadu", "mediatek,mt8183";
- };
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku16.dts
-@@ -12,6 +12,7 @@
-
- / {
- model = "MediaTek kodama sku16 board";
-+ chassis-type = "tablet";
- compatible = "google,kodama-sku16", "google,kodama", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku272.dts
-@@ -12,6 +12,7 @@
-
- / {
- model = "MediaTek kodama sku272 board";
-+ chassis-type = "tablet";
- compatible = "google,kodama-sku272", "google,kodama", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama-sku288.dts
-@@ -12,6 +12,7 @@
-
- / {
- model = "MediaTek kodama sku288 board";
-+ chassis-type = "tablet";
- compatible = "google,kodama-sku288", "google,kodama", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku0.dts
-@@ -14,6 +14,7 @@
-
- / {
- model = "MediaTek krane sku0 board";
-+ chassis-type = "tablet";
- compatible = "google,krane-sku0", "google,krane", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
-@@ -14,6 +14,7 @@
-
- / {
- model = "MediaTek krane sku176 board";
-+ chassis-type = "tablet";
- compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
- };
-
---- a/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt8186-evb.dts
-@@ -7,6 +7,7 @@
-
- / {
- model = "MediaTek MT8186 evaluation board";
-+ chassis-type = "embedded";
- compatible = "mediatek,mt8186-evb", "mediatek,mt8186";
-
- aliases {
+++ /dev/null
-From 3b92c547e3d4a35c6214b3e7fa1103d0749d83b1 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 21 Apr 2023 15:20:44 +0200
-Subject: [PATCH 12/19] arm64: dts: mt7986: add PWM
-
-This adds pwm node to mt7986.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230421132047.42166-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -240,6 +240,20 @@
- status = "disabled";
- };
-
-+ pwm: pwm@10048000 {
-+ compatible = "mediatek,mt7986-pwm";
-+ reg = <0 0x10048000 0 0x1000>;
-+ #clock-cells = <1>;
-+ #pwm-cells = <2>;
-+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&topckgen CLK_TOP_PWM_SEL>,
-+ <&infracfg CLK_INFRA_PWM_STA>,
-+ <&infracfg CLK_INFRA_PWM1_CK>,
-+ <&infracfg CLK_INFRA_PWM2_CK>;
-+ clock-names = "top", "main", "pwm1", "pwm2";
-+ status = "disabled";
-+ };
-+
- uart0: serial@11002000 {
- compatible = "mediatek,mt7986-uart",
- "mediatek,mt6577-uart";
+++ /dev/null
-From 35e482bb599df010b4869017ff576dbb7a4d4c2e Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Fri, 21 Apr 2023 15:20:45 +0200
-Subject: [PATCH 13/19] arm64: dts: mt7986: add PWM to BPI-R3
-
-Add pwm node and pinctrl to BananaPi R3 devicetree.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Link: https://lore.kernel.org/r/20230421132047.42166-6-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -275,6 +275,13 @@
- };
- };
-
-+ pwm_pins: pwm-pins {
-+ mux {
-+ function = "pwm";
-+ groups = "pwm0", "pwm1_0";
-+ };
-+ };
-+
- spi_flash_pins: spi-flash-pins {
- mux {
- function = "spi";
-@@ -345,6 +352,12 @@
- };
- };
-
-+&pwm {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm_pins>;
-+ status = "okay";
-+};
-+
- &spi0 {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_flash_pins>;
+++ /dev/null
-From ccdda5714446db8690505371442f7807f5d7c6fc Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 5 Feb 2023 18:48:33 +0100
-Subject: [PATCH 14/19] arm64: dts: mt7986: set Wifi Leds low-active for BPI-R3
-
-Leds for Wifi are low-active, so add property to devicetree.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230205174833.107050-1-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -460,5 +460,9 @@
- pinctrl-names = "default", "dbdc";
- pinctrl-0 = <&wf_2g_5g_pins>, <&wf_led_pins>;
- pinctrl-1 = <&wf_dbdc_pins>, <&wf_led_pins>;
-+
-+ led {
-+ led-active-low;
-+ };
- };
-
+++ /dev/null
-From 1423b4b780adcf3994e63a5988a62d5d1d509bb1 Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 28 May 2023 13:33:42 +0200
-Subject: [PATCH 15/19] arm64: dts: mt7986: use size of reserved partition for
- bl2
-
-To store uncompressed bl2 more space is required than partition is
-actually defined.
-
-There is currently no known usage of this reserved partition.
-Openwrt uses same partition layout.
-
-We added same change to u-boot with commit d7bb1099 [1].
-
-[1] https://source.denx.de/u-boot/u-boot/-/commit/d7bb109900c1ca754a0198b9afb50e3161ffc21e
-
-Cc: stable@vger.kernel.org
-Fixes: 8e01fb15b815 ("arm64: dts: mt7986: add Bananapi R3")
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230528113343.7649-1-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nor.dtso
-@@ -27,15 +27,10 @@
-
- partition@0 {
- label = "bl2";
-- reg = <0x0 0x20000>;
-+ reg = <0x0 0x40000>;
- read-only;
- };
-
-- partition@20000 {
-- label = "reserved";
-- reg = <0x20000 0x20000>;
-- };
--
- partition@40000 {
- label = "u-boot-env";
- reg = <0x40000 0x40000>;
+++ /dev/null
-From 40a5a767d698ef7a71f8be851ea18b0a7a8b47bd Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 30 May 2023 22:12:33 +0200
-Subject: [PATCH 16/19] arm64: dts: mt7986: add thermal and efuse
-
-Add thermal related nodes to mt7986 devicetree.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230530201235.22330-3-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 36 ++++++++++++++++++++++-
- 1 file changed, 35 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -337,6 +337,15 @@
- status = "disabled";
- };
-
-+ auxadc: adc@1100d000 {
-+ compatible = "mediatek,mt7986-auxadc";
-+ reg = <0 0x1100d000 0 0x1000>;
-+ clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
-+ clock-names = "main";
-+ #io-channel-cells = <1>;
-+ status = "disabled";
-+ };
-+
- ssusb: usb@11200000 {
- compatible = "mediatek,mt7986-xhci",
- "mediatek,mtk-xhci";
-@@ -375,6 +384,21 @@
- status = "disabled";
- };
-
-+ thermal: thermal@1100c800 {
-+ #thermal-sensor-cells = <1>;
-+ compatible = "mediatek,mt7986-thermal";
-+ reg = <0 0x1100c800 0 0x800>;
-+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&infracfg CLK_INFRA_THERM_CK>,
-+ <&infracfg CLK_INFRA_ADC_26M_CK>,
-+ <&infracfg CLK_INFRA_ADC_FRC_CK>;
-+ clock-names = "therm", "auxadc", "adc_32k";
-+ mediatek,auxadc = <&auxadc>;
-+ mediatek,apmixedsys = <&apmixedsys>;
-+ nvmem-cells = <&thermal_calibration>;
-+ nvmem-cell-names = "calibration-data";
-+ };
-+
- pcie: pcie@11280000 {
- compatible = "mediatek,mt7986-pcie",
- "mediatek,mt8192-pcie";
-@@ -426,6 +450,17 @@
- };
- };
-
-+ efuse: efuse@11d00000 {
-+ compatible = "mediatek,mt7986-efuse", "mediatek,efuse";
-+ reg = <0 0x11d00000 0 0x1000>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ thermal_calibration: calib@274 {
-+ reg = <0x274 0xc>;
-+ };
-+ };
-+
- usb_phy: t-phy@11e10000 {
- compatible = "mediatek,mt7986-tphy",
- "mediatek,generic-tphy-v2";
-@@ -567,5 +602,4 @@
- memory-region = <&wmcpu_emi>;
- };
- };
--
- };
+++ /dev/null
-From bb78d0cf5117517f1ed296ae71048945d9107675 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 30 May 2023 22:12:34 +0200
-Subject: [PATCH 17/19] arm64: dts: mt7986: add thermal-zones
-
-Add thermal-zones to mt7986 devicetree.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230530201235.22330-4-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 28 +++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
-@@ -602,4 +602,32 @@
- memory-region = <&wmcpu_emi>;
- };
- };
-+
-+ thermal-zones {
-+ cpu_thermal: cpu-thermal {
-+ polling-delay-passive = <1000>;
-+ polling-delay = <1000>;
-+ thermal-sensors = <&thermal 0>;
-+
-+ trips {
-+ cpu_trip_active_high: active-high {
-+ temperature = <115000>;
-+ hysteresis = <2000>;
-+ type = "active";
-+ };
-+
-+ cpu_trip_active_low: active-low {
-+ temperature = <85000>;
-+ hysteresis = <2000>;
-+ type = "active";
-+ };
-+
-+ cpu_trip_passive: passive {
-+ temperature = <40000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+ };
-+ };
-+ };
- };
+++ /dev/null
-From 5d90603b09e5814ffc38c47e79ccf9bc564f9296 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 30 May 2023 22:12:35 +0200
-Subject: [PATCH 18/19] arm64: dts: mt7986: add pwm-fan and cooling-maps to
- BPI-R3 dts
-
-Add pwm-fan and cooling-maps to BananaPi-R3 devicetree.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230530201235.22330-5-linux@fw-web.de
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../dts/mediatek/mt7986a-bananapi-bpi-r3.dts | 31 +++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
-@@ -38,6 +38,15 @@
- regulator-always-on;
- };
-
-+ fan: pwm-fan {
-+ compatible = "pwm-fan";
-+ #cooling-cells = <2>;
-+ /* cooling level (0, 1, 2) - pwm inverted */
-+ cooling-levels = <255 96 0>;
-+ pwms = <&pwm 0 10000 0>;
-+ status = "okay";
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
-
-@@ -133,6 +142,28 @@
- };
- };
-
-+&cpu_thermal {
-+ cooling-maps {
-+ cpu-active-high {
-+ /* active: set fan to cooling level 2 */
-+ cooling-device = <&fan 2 2>;
-+ trip = <&cpu_trip_active_high>;
-+ };
-+
-+ cpu-active-low {
-+ /* active: set fan to cooling level 1 */
-+ cooling-device = <&fan 1 1>;
-+ trip = <&cpu_trip_active_low>;
-+ };
-+
-+ cpu-passive {
-+ /* passive: set fan to cooling level 0 */
-+ cooling-device = <&fan 0 0>;
-+ trip = <&cpu_trip_passive>;
-+ };
-+ };
-+};
-+
- &crypto {
- status = "okay";
- };
+++ /dev/null
-From 6dd3b939370094eb79529683be84500f3c757404 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Tue, 6 Jun 2023 16:43:20 +0100
-Subject: [PATCH 19/19] arm64: dts: mt7986: increase bl2 partition on NAND of
- Bananapi R3
-
-The bootrom burned into the MT7986 SoC will try multiple locations on
-the SPI-NAND flash to load bl2 in case the bl2 image located at the the
-previously attempted offset is corrupt.
-
-Use 0x100000 instead of 0x80000 as partition size for bl2 on SPI-NAND,
-allowing for up to four redundant copies of bl2 (typically sized a
-bit less than 0x40000).
-
-Fixes: 8e01fb15b8157 ("arm64: dts: mt7986: add Bananapi R3")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZH9UGF99RgzrHZ88@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3-nand.dtso
-@@ -29,13 +29,13 @@
-
- partition@0 {
- label = "bl2";
-- reg = <0x0 0x80000>;
-+ reg = <0x0 0x100000>;
- read-only;
- };
-
-- partition@80000 {
-+ partition@100000 {
- label = "reserved";
-- reg = <0x80000 0x300000>;
-+ reg = <0x100000 0x280000>;
- };
-
- partition@380000 {
+++ /dev/null
-From d278f43f25beedfd0cb784d1dd0a9e7e8c8f123f Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Apr 2023 20:15:53 +0100
-Subject: [PATCH] arm64: dts: mt7622: declare SPI-NAND present on BPI-R64
-
-The SPI-NOR node in the device tree of the BananaPi R64 has most likely
-been copied from the reference board's device tree even though the R64
-comes with an SPI-NAND chip rather than SPI-NOR.
-
-Setup the Serial NAND Flash Interface (SNFI) controller, enable
-hardware BCH error detection and correction engine and add the SPI-NAND
-chip including basic partitions,
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZEA96dmaXqTpk8u8@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- .../dts/mediatek/mt7622-bananapi-bpi-r64.dts | 38 ++++++++++++++++---
- 1 file changed, 33 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -253,14 +253,42 @@
- status = "disabled";
- };
-
--&nor_flash {
-- pinctrl-names = "default";
-- pinctrl-0 = <&spi_nor_pins>;
-- status = "disabled";
-+&bch {
-+ status = "okay";
-+};
-
-+&snfi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&serial_nand_pins>;
-+ status = "okay";
- flash@0 {
-- compatible = "jedec,spi-nor";
-+ compatible = "spi-nand";
- reg = <0>;
-+ spi-tx-bus-width = <4>;
-+ spi-rx-bus-width = <4>;
-+ nand-ecc-engine = <&snfi>;
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "bl2";
-+ reg = <0x0 0x80000>;
-+ read-only;
-+ };
-+
-+ partition@80000 {
-+ label = "fip";
-+ reg = <0x80000 0x200000>;
-+ read-only;
-+ };
-+
-+ ubi: partition@280000 {
-+ label = "ubi";
-+ reg = <0x280000 0x7d80000>;
-+ };
-+ };
- };
- };
-
+++ /dev/null
-From 983f37ee08acb60435744f1b1e2afea2d2a09c48 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 19 Apr 2023 20:16:29 +0100
-Subject: [PATCH] arm64: dts: mt7622: handle interrupts from MT7531 switch on
- BPI-R64
-
-Since commit ba751e28d442 ("net: dsa: mt7530: add interrupt support")
-the mt7530 driver can act as an interrupt controller. Wire up irq line
-of the MT7531 switch on the BananaPi BPi-R64 board, so the status of
-the PHYs of the five 1000Base-T ports doesn't need to be polled any
-more.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/ZEA-DV_OsmFg5egL@makrotopia.org
-Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
----
- arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
-@@ -154,6 +154,10 @@
- switch@0 {
- compatible = "mediatek,mt7531";
- reg = <0>;
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+ interrupt-parent = <&pio>;
-+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
- reset-gpios = <&pio 54 0>;
-
- ports {
+++ /dev/null
-From f76e8bc416bebb0f7b9f57b1247eae945421c0b9 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sat, 8 Oct 2022 18:48:06 +0200
-Subject: [PATCH 1/2] pinctrl: mt7986: allow configuring uart rx/tx and rts/cts
- separately
-
-Some mt7986 boards use uart rts/cts pins as gpio,
-This patch allows to change rts/cts to gpio mode, but keep
-rx/tx as UART function.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Link: https://lore.kernel.org/r/20221008164807.113590-1-linux@fw-web.de
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7986.c | 32 ++++++++++++++++++-----
- 1 file changed, 25 insertions(+), 7 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-@@ -675,11 +675,17 @@ static int mt7986_uart1_1_funcs[] = { 4,
- static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
- static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
-
--static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
--static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
-+static int mt7986_uart1_2_rx_tx_pins[] = { 29, 30, };
-+static int mt7986_uart1_2_rx_tx_funcs[] = { 3, 3, };
-
--static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
--static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
-+static int mt7986_uart1_2_cts_rts_pins[] = { 31, 32, };
-+static int mt7986_uart1_2_cts_rts_funcs[] = { 3, 3, };
-+
-+static int mt7986_uart2_0_rx_tx_pins[] = { 29, 30, };
-+static int mt7986_uart2_0_rx_tx_funcs[] = { 4, 4, };
-+
-+static int mt7986_uart2_0_cts_rts_pins[] = { 31, 32, };
-+static int mt7986_uart2_0_cts_rts_funcs[] = { 4, 4, };
-
- static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
- static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
-@@ -708,6 +714,12 @@ static int mt7986_pcie_reset_funcs[] = {
- static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
- static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
-
-+static int mt7986_uart1_rx_tx_pins[] = { 42, 43, };
-+static int mt7986_uart1_rx_tx_funcs[] = { 1, 1, };
-+
-+static int mt7986_uart1_cts_rts_pins[] = { 44, 45, };
-+static int mt7986_uart1_cts_rts_funcs[] = { 1, 1, };
-+
- static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
- static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
-
-@@ -749,6 +761,8 @@ static const struct group_desc mt7986_gr
- PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
- PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
- PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
-+ PINCTRL_PIN_GROUP("uart1_rx_tx", mt7986_uart1_rx_tx),
-+ PINCTRL_PIN_GROUP("uart1_cts_rts", mt7986_uart1_cts_rts),
- PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
- PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
- PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
-@@ -760,8 +774,10 @@ static const struct group_desc mt7986_gr
- PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
- PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
- PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
-- PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
-- PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
-+ PINCTRL_PIN_GROUP("uart1_2_rx_tx", mt7986_uart1_2_rx_tx),
-+ PINCTRL_PIN_GROUP("uart1_2_cts_rts", mt7986_uart1_2_cts_rts),
-+ PINCTRL_PIN_GROUP("uart2_0_rx_tx", mt7986_uart2_0_rx_tx),
-+ PINCTRL_PIN_GROUP("uart2_0_cts_rts", mt7986_uart2_0_cts_rts),
- PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
- PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
- PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
-@@ -800,7 +816,9 @@ static const char *mt7986_pwm_groups[] =
- static const char *mt7986_spi_groups[] = {
- "spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
- static const char *mt7986_uart_groups[] = {
-- "uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
-+ "uart1_0", "uart1_1", "uart1_rx_tx", "uart1_cts_rts",
-+ "uart1_2_rx_tx", "uart1_2_cts_rts",
-+ "uart1_3_rx_tx", "uart1_3_cts_rts", "uart2_0_rx_tx", "uart2_0_cts_rts",
- "uart2_0", "uart2_1", "uart0", "uart1", "uart2",
- };
- static const char *mt7986_wdt_groups[] = { "watchdog", };
+++ /dev/null
-From 822d774abbcc66b811e28c68b59b40b964ba5b46 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:01:13 +0100
-Subject: [PATCH 2/2] pinctrl: mediatek: add pull_type attribute for mediatek
- MT7986 SoC
-
-Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
-add SoC specify 'pull_type' attribute for bias configuration.
-
-This patch add pull_type attribute to pinctrl-mt7986.c, and make
-bias_set_combo and bias_get_combo available to mediatek MT7986 SoC.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106080114.7426-7-linux@fw-web.de
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7986.c | 56 +++++++++++++++++++++++
- 1 file changed, 56 insertions(+)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-@@ -407,6 +407,60 @@ static const struct mtk_pin_field_calc m
- PIN_FIELD_BASE(66, 68, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
- };
-
-+static const unsigned int mt7986_pull_type[] = {
-+ MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PUPD_R1R0_TYPE,/*7*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*8*/ MTK_PULL_PUPD_R1R0_TYPE,/*9*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*16*/ MTK_PULL_PUPD_R1R0_TYPE,/*17*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/
-+ MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/
-+ MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/
-+ MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/
-+ MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/
-+ MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/
-+ MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/
-+ MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/
-+ MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/
-+ MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/
-+ MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/
-+ MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/
-+ MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/
-+ MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/
-+ MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/
-+ MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/
-+ MTK_PULL_PU_PD_TYPE,/*100*/
-+};
-+
- static const struct mtk_pin_reg_calc mt7986_reg_cals[] = {
- [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986_pin_mode_range),
- [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986_pin_dir_range),
-@@ -868,6 +922,7 @@ static struct mtk_pin_soc mt7986a_data =
- .ies_present = false,
- .base_names = mt7986_pinctrl_register_base_names,
- .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+ .pull_type = mt7986_pull_type,
- .bias_set_combo = mtk_pinconf_bias_set_combo,
- .bias_get_combo = mtk_pinconf_bias_get_combo,
- .drive_set = mtk_pinconf_drive_set_rev1,
-@@ -889,6 +944,7 @@ static struct mtk_pin_soc mt7986b_data =
- .ies_present = false,
- .base_names = mt7986_pinctrl_register_base_names,
- .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+ .pull_type = mt7986_pull_type,
- .bias_set_combo = mtk_pinconf_bias_set_combo,
- .bias_get_combo = mtk_pinconf_bias_get_combo,
- .drive_set = mtk_pinconf_drive_set_rev1,
+++ /dev/null
-From 6c83b2d94fcca735cf7d8aa7a55a4957eb404a9d Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 00:34:56 +0000
-Subject: [PATCH] pinctrl: add mt7981 pinctrl driver
-
-Add pinctrl driver for the MediaTek MT7981 SoC, based on the driver
-which can also be found the SDK.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/ef5112946d16cacc67e65e439ba7b52a9950c1bb.1674693008.git.daniel@makrotopia.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/Kconfig | 5 +
- drivers/pinctrl/mediatek/Makefile | 1 +
- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 1048 +++++++++++++++++++++
- 3 files changed, 1054 insertions(+)
- create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7981.c
-
---- a/drivers/pinctrl/mediatek/Kconfig
-+++ b/drivers/pinctrl/mediatek/Kconfig
-@@ -127,6 +127,11 @@ config PINCTRL_MT7622
- default ARM64 && ARCH_MEDIATEK
- select PINCTRL_MTK_MOORE
-
-+config PINCTRL_MT7981
-+ bool "Mediatek MT7981 pin control"
-+ depends on OF
-+ select PINCTRL_MTK_MOORE
-+
- config PINCTRL_MT7986
- bool "Mediatek MT7986 pin control"
- depends on OF
---- a/drivers/pinctrl/mediatek/Makefile
-+++ b/drivers/pinctrl/mediatek/Makefile
-@@ -18,6 +18,7 @@ obj-$(CONFIG_PINCTRL_MT6797) += pinctrl-
- obj-$(CONFIG_PINCTRL_MT7622) += pinctrl-mt7622.o
- obj-$(CONFIG_PINCTRL_MT7623) += pinctrl-mt7623.o
- obj-$(CONFIG_PINCTRL_MT7629) += pinctrl-mt7629.o
-+obj-$(CONFIG_PINCTRL_MT7981) += pinctrl-mt7981.o
- obj-$(CONFIG_PINCTRL_MT7986) += pinctrl-mt7986.o
- obj-$(CONFIG_PINCTRL_MT8167) += pinctrl-mt8167.o
- obj-$(CONFIG_PINCTRL_MT8173) += pinctrl-mt8173.o
---- /dev/null
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
-@@ -0,0 +1,1048 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * The MT7981 driver based on Linux generic pinctrl binding.
-+ *
-+ * Copyright (C) 2020 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ */
-+
-+#include "pinctrl-moore.h"
-+
-+#define MT7981_PIN(_number, _name) \
-+ MTK_PIN(_number, _name, 0, _number, DRV_GRP4)
-+
-+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 0)
-+
-+#define PINS_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
-+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
-+ _x_bits, 32, 1)
-+
-+static const struct mtk_pin_field_calc mt7981_pin_mode_range[] = {
-+ PIN_FIELD(0, 56, 0x300, 0x10, 0, 4),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_dir_range[] = {
-+ PIN_FIELD(0, 56, 0x0, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_di_range[] = {
-+ PIN_FIELD(0, 56, 0x200, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_do_range[] = {
-+ PIN_FIELD(0, 56, 0x100, 0x10, 0, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_ies_range[] = {
-+ PIN_FIELD_BASE(0, 0, 1, 0x10, 0x10, 1, 1),
-+ PIN_FIELD_BASE(1, 1, 1, 0x10, 0x10, 0, 1),
-+ PIN_FIELD_BASE(2, 2, 5, 0x20, 0x10, 6, 1),
-+ PIN_FIELD_BASE(3, 3, 4, 0x20, 0x10, 6, 1),
-+ PIN_FIELD_BASE(4, 4, 4, 0x20, 0x10, 2, 1),
-+ PIN_FIELD_BASE(5, 5, 4, 0x20, 0x10, 1, 1),
-+ PIN_FIELD_BASE(6, 6, 4, 0x20, 0x10, 3, 1),
-+ PIN_FIELD_BASE(7, 7, 4, 0x20, 0x10, 0, 1),
-+ PIN_FIELD_BASE(8, 8, 4, 0x20, 0x10, 4, 1),
-+
-+ PIN_FIELD_BASE(9, 9, 5, 0x20, 0x10, 9, 1),
-+ PIN_FIELD_BASE(10, 10, 5, 0x20, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 5, 0x40, 0x10, 10, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x20, 0x10, 7, 1),
-+ PIN_FIELD_BASE(13, 13, 5, 0x20, 0x10, 11, 1),
-+
-+ PIN_FIELD_BASE(14, 14, 4, 0x20, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(15, 15, 2, 0x20, 0x10, 0, 1),
-+ PIN_FIELD_BASE(16, 16, 2, 0x20, 0x10, 1, 1),
-+ PIN_FIELD_BASE(17, 17, 2, 0x20, 0x10, 5, 1),
-+ PIN_FIELD_BASE(18, 18, 2, 0x20, 0x10, 4, 1),
-+ PIN_FIELD_BASE(19, 19, 2, 0x20, 0x10, 2, 1),
-+ PIN_FIELD_BASE(20, 20, 2, 0x20, 0x10, 3, 1),
-+ PIN_FIELD_BASE(21, 21, 2, 0x20, 0x10, 6, 1),
-+ PIN_FIELD_BASE(22, 22, 2, 0x20, 0x10, 7, 1),
-+ PIN_FIELD_BASE(23, 23, 2, 0x20, 0x10, 10, 1),
-+ PIN_FIELD_BASE(24, 24, 2, 0x20, 0x10, 9, 1),
-+ PIN_FIELD_BASE(25, 25, 2, 0x20, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(26, 26, 5, 0x20, 0x10, 0, 1),
-+ PIN_FIELD_BASE(27, 27, 5, 0x20, 0x10, 4, 1),
-+ PIN_FIELD_BASE(28, 28, 5, 0x20, 0x10, 3, 1),
-+ PIN_FIELD_BASE(29, 29, 5, 0x20, 0x10, 1, 1),
-+ PIN_FIELD_BASE(30, 30, 5, 0x20, 0x10, 2, 1),
-+ PIN_FIELD_BASE(31, 31, 5, 0x20, 0x10, 5, 1),
-+
-+ PIN_FIELD_BASE(32, 32, 1, 0x10, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 1, 0x10, 0x10, 3, 1),
-+
-+ PIN_FIELD_BASE(34, 34, 4, 0x20, 0x10, 5, 1),
-+ PIN_FIELD_BASE(35, 35, 4, 0x20, 0x10, 7, 1),
-+
-+ PIN_FIELD_BASE(36, 36, 3, 0x10, 0x10, 2, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x10, 0x10, 3, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x10, 0x10, 0, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x10, 0x10, 1, 1),
-+
-+ PIN_FIELD_BASE(40, 40, 7, 0x30, 0x10, 1, 1),
-+ PIN_FIELD_BASE(41, 41, 7, 0x30, 0x10, 0, 1),
-+ PIN_FIELD_BASE(42, 42, 7, 0x30, 0x10, 9, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x30, 0x10, 7, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x30, 0x10, 8, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x30, 0x10, 3, 1),
-+ PIN_FIELD_BASE(46, 46, 7, 0x30, 0x10, 4, 1),
-+ PIN_FIELD_BASE(47, 47, 7, 0x30, 0x10, 5, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x30, 0x10, 6, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x30, 0x10, 2, 1),
-+
-+ PIN_FIELD_BASE(50, 50, 6, 0x10, 0x10, 0, 1),
-+ PIN_FIELD_BASE(51, 51, 6, 0x10, 0x10, 2, 1),
-+ PIN_FIELD_BASE(52, 52, 6, 0x10, 0x10, 3, 1),
-+ PIN_FIELD_BASE(53, 53, 6, 0x10, 0x10, 4, 1),
-+ PIN_FIELD_BASE(54, 54, 6, 0x10, 0x10, 5, 1),
-+ PIN_FIELD_BASE(55, 55, 6, 0x10, 0x10, 6, 1),
-+ PIN_FIELD_BASE(56, 56, 6, 0x10, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_smt_range[] = {
-+ PIN_FIELD_BASE(0, 0, 1, 0x60, 0x10, 1, 1),
-+ PIN_FIELD_BASE(1, 1, 1, 0x60, 0x10, 0, 1),
-+ PIN_FIELD_BASE(2, 2, 5, 0x90, 0x10, 6, 1),
-+ PIN_FIELD_BASE(3, 3, 4, 0x80, 0x10, 6, 1),
-+ PIN_FIELD_BASE(4, 4, 4, 0x80, 0x10, 2, 1),
-+ PIN_FIELD_BASE(5, 5, 4, 0x80, 0x10, 1, 1),
-+ PIN_FIELD_BASE(6, 6, 4, 0x80, 0x10, 3, 1),
-+ PIN_FIELD_BASE(7, 7, 4, 0x80, 0x10, 0, 1),
-+ PIN_FIELD_BASE(8, 8, 4, 0x80, 0x10, 4, 1),
-+
-+ PIN_FIELD_BASE(9, 9, 5, 0x90, 0x10, 9, 1),
-+ PIN_FIELD_BASE(10, 10, 5, 0x90, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 5, 0x90, 0x10, 10, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x90, 0x10, 7, 1),
-+ PIN_FIELD_BASE(13, 13, 5, 0x90, 0x10, 11, 1),
-+
-+ PIN_FIELD_BASE(14, 14, 4, 0x80, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(15, 15, 2, 0x90, 0x10, 0, 1),
-+ PIN_FIELD_BASE(16, 16, 2, 0x90, 0x10, 1, 1),
-+ PIN_FIELD_BASE(17, 17, 2, 0x90, 0x10, 5, 1),
-+ PIN_FIELD_BASE(18, 18, 2, 0x90, 0x10, 4, 1),
-+ PIN_FIELD_BASE(19, 19, 2, 0x90, 0x10, 2, 1),
-+ PIN_FIELD_BASE(20, 20, 2, 0x90, 0x10, 3, 1),
-+ PIN_FIELD_BASE(21, 21, 2, 0x90, 0x10, 6, 1),
-+ PIN_FIELD_BASE(22, 22, 2, 0x90, 0x10, 7, 1),
-+ PIN_FIELD_BASE(23, 23, 2, 0x90, 0x10, 10, 1),
-+ PIN_FIELD_BASE(24, 24, 2, 0x90, 0x10, 9, 1),
-+ PIN_FIELD_BASE(25, 25, 2, 0x90, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(26, 26, 5, 0x90, 0x10, 0, 1),
-+ PIN_FIELD_BASE(27, 27, 5, 0x90, 0x10, 4, 1),
-+ PIN_FIELD_BASE(28, 28, 5, 0x90, 0x10, 3, 1),
-+ PIN_FIELD_BASE(29, 29, 5, 0x90, 0x10, 1, 1),
-+ PIN_FIELD_BASE(30, 30, 5, 0x90, 0x10, 2, 1),
-+ PIN_FIELD_BASE(31, 31, 5, 0x90, 0x10, 5, 1),
-+
-+ PIN_FIELD_BASE(32, 32, 1, 0x60, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 1, 0x60, 0x10, 3, 1),
-+
-+ PIN_FIELD_BASE(34, 34, 4, 0x80, 0x10, 5, 1),
-+ PIN_FIELD_BASE(35, 35, 4, 0x80, 0x10, 7, 1),
-+
-+ PIN_FIELD_BASE(36, 36, 3, 0x60, 0x10, 2, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x60, 0x10, 3, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x60, 0x10, 0, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x60, 0x10, 1, 1),
-+
-+ PIN_FIELD_BASE(40, 40, 7, 0x70, 0x10, 1, 1),
-+ PIN_FIELD_BASE(41, 41, 7, 0x70, 0x10, 0, 1),
-+ PIN_FIELD_BASE(42, 42, 7, 0x70, 0x10, 9, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x70, 0x10, 7, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x30, 0x10, 8, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x70, 0x10, 3, 1),
-+ PIN_FIELD_BASE(46, 46, 7, 0x70, 0x10, 4, 1),
-+ PIN_FIELD_BASE(47, 47, 7, 0x70, 0x10, 5, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x70, 0x10, 6, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x70, 0x10, 2, 1),
-+
-+ PIN_FIELD_BASE(50, 50, 6, 0x50, 0x10, 0, 1),
-+ PIN_FIELD_BASE(51, 51, 6, 0x50, 0x10, 2, 1),
-+ PIN_FIELD_BASE(52, 52, 6, 0x50, 0x10, 3, 1),
-+ PIN_FIELD_BASE(53, 53, 6, 0x50, 0x10, 4, 1),
-+ PIN_FIELD_BASE(54, 54, 6, 0x50, 0x10, 5, 1),
-+ PIN_FIELD_BASE(55, 55, 6, 0x50, 0x10, 6, 1),
-+ PIN_FIELD_BASE(56, 56, 6, 0x50, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_pu_range[] = {
-+ PIN_FIELD_BASE(40, 40, 7, 0x50, 0x10, 1, 1),
-+ PIN_FIELD_BASE(41, 41, 7, 0x50, 0x10, 0, 1),
-+ PIN_FIELD_BASE(42, 42, 7, 0x50, 0x10, 9, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x50, 0x10, 7, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x50, 0x10, 8, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x50, 0x10, 3, 1),
-+ PIN_FIELD_BASE(46, 46, 7, 0x50, 0x10, 4, 1),
-+ PIN_FIELD_BASE(47, 47, 7, 0x50, 0x10, 5, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x50, 0x10, 6, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x50, 0x10, 2, 1),
-+
-+ PIN_FIELD_BASE(50, 50, 6, 0x30, 0x10, 0, 1),
-+ PIN_FIELD_BASE(51, 51, 6, 0x30, 0x10, 2, 1),
-+ PIN_FIELD_BASE(52, 52, 6, 0x30, 0x10, 3, 1),
-+ PIN_FIELD_BASE(53, 53, 6, 0x30, 0x10, 4, 1),
-+ PIN_FIELD_BASE(54, 54, 6, 0x30, 0x10, 5, 1),
-+ PIN_FIELD_BASE(55, 55, 6, 0x30, 0x10, 6, 1),
-+ PIN_FIELD_BASE(56, 56, 6, 0x30, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_pd_range[] = {
-+ PIN_FIELD_BASE(40, 40, 7, 0x40, 0x10, 1, 1),
-+ PIN_FIELD_BASE(41, 41, 7, 0x40, 0x10, 0, 1),
-+ PIN_FIELD_BASE(42, 42, 7, 0x40, 0x10, 9, 1),
-+ PIN_FIELD_BASE(43, 43, 7, 0x40, 0x10, 7, 1),
-+ PIN_FIELD_BASE(44, 44, 7, 0x40, 0x10, 8, 1),
-+ PIN_FIELD_BASE(45, 45, 7, 0x40, 0x10, 3, 1),
-+ PIN_FIELD_BASE(46, 46, 7, 0x40, 0x10, 4, 1),
-+ PIN_FIELD_BASE(47, 47, 7, 0x40, 0x10, 5, 1),
-+ PIN_FIELD_BASE(48, 48, 7, 0x40, 0x10, 6, 1),
-+ PIN_FIELD_BASE(49, 49, 7, 0x40, 0x10, 2, 1),
-+
-+ PIN_FIELD_BASE(50, 50, 6, 0x20, 0x10, 0, 1),
-+ PIN_FIELD_BASE(51, 51, 6, 0x20, 0x10, 2, 1),
-+ PIN_FIELD_BASE(52, 52, 6, 0x20, 0x10, 3, 1),
-+ PIN_FIELD_BASE(53, 53, 6, 0x20, 0x10, 4, 1),
-+ PIN_FIELD_BASE(54, 54, 6, 0x20, 0x10, 5, 1),
-+ PIN_FIELD_BASE(55, 55, 6, 0x20, 0x10, 6, 1),
-+ PIN_FIELD_BASE(56, 56, 6, 0x20, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_drv_range[] = {
-+ PIN_FIELD_BASE(0, 0, 1, 0x00, 0x10, 3, 3),
-+ PIN_FIELD_BASE(1, 1, 1, 0x00, 0x10, 0, 3),
-+
-+ PIN_FIELD_BASE(2, 2, 5, 0x00, 0x10, 18, 3),
-+
-+ PIN_FIELD_BASE(3, 3, 4, 0x00, 0x10, 18, 1),
-+ PIN_FIELD_BASE(4, 4, 4, 0x00, 0x10, 6, 1),
-+ PIN_FIELD_BASE(5, 5, 4, 0x00, 0x10, 3, 3),
-+ PIN_FIELD_BASE(6, 6, 4, 0x00, 0x10, 9, 3),
-+ PIN_FIELD_BASE(7, 7, 4, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(8, 8, 4, 0x00, 0x10, 12, 3),
-+
-+ PIN_FIELD_BASE(9, 9, 5, 0x00, 0x10, 27, 3),
-+ PIN_FIELD_BASE(10, 10, 5, 0x00, 0x10, 24, 3),
-+ PIN_FIELD_BASE(11, 11, 5, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(12, 12, 5, 0x00, 0x10, 21, 3),
-+ PIN_FIELD_BASE(13, 13, 5, 0x00, 0x10, 3, 3),
-+
-+ PIN_FIELD_BASE(14, 14, 4, 0x00, 0x10, 27, 3),
-+
-+ PIN_FIELD_BASE(15, 15, 2, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(16, 16, 2, 0x00, 0x10, 3, 3),
-+ PIN_FIELD_BASE(17, 17, 2, 0x00, 0x10, 15, 3),
-+ PIN_FIELD_BASE(18, 18, 2, 0x00, 0x10, 12, 3),
-+ PIN_FIELD_BASE(19, 19, 2, 0x00, 0x10, 6, 3),
-+ PIN_FIELD_BASE(20, 20, 2, 0x00, 0x10, 9, 3),
-+ PIN_FIELD_BASE(21, 21, 2, 0x00, 0x10, 18, 3),
-+ PIN_FIELD_BASE(22, 22, 2, 0x00, 0x10, 21, 3),
-+ PIN_FIELD_BASE(23, 23, 2, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(24, 24, 2, 0x00, 0x10, 27, 3),
-+ PIN_FIELD_BASE(25, 25, 2, 0x00, 0x10, 24, 3),
-+
-+ PIN_FIELD_BASE(26, 26, 5, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(27, 27, 5, 0x00, 0x10, 12, 3),
-+ PIN_FIELD_BASE(28, 28, 5, 0x00, 0x10, 9, 3),
-+ PIN_FIELD_BASE(29, 29, 5, 0x00, 0x10, 3, 3),
-+ PIN_FIELD_BASE(30, 30, 5, 0x00, 0x10, 6, 3),
-+ PIN_FIELD_BASE(31, 31, 5, 0x00, 0x10, 15, 3),
-+
-+ PIN_FIELD_BASE(32, 32, 1, 0x00, 0x10, 9, 3),
-+ PIN_FIELD_BASE(33, 33, 1, 0x00, 0x10, 12, 3),
-+
-+ PIN_FIELD_BASE(34, 34, 4, 0x00, 0x10, 15, 3),
-+ PIN_FIELD_BASE(35, 35, 4, 0x00, 0x10, 21, 3),
-+
-+ PIN_FIELD_BASE(36, 36, 3, 0x00, 0x10, 6, 3),
-+ PIN_FIELD_BASE(37, 37, 3, 0x00, 0x10, 9, 3),
-+ PIN_FIELD_BASE(38, 38, 3, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(39, 39, 3, 0x00, 0x10, 3, 3),
-+
-+ PIN_FIELD_BASE(40, 40, 7, 0x00, 0x10, 3, 3),
-+ PIN_FIELD_BASE(41, 41, 7, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(42, 42, 7, 0x00, 0x10, 27, 3),
-+ PIN_FIELD_BASE(43, 43, 7, 0x00, 0x10, 21, 3),
-+ PIN_FIELD_BASE(44, 44, 7, 0x00, 0x10, 24, 3),
-+ PIN_FIELD_BASE(45, 45, 7, 0x00, 0x10, 9, 3),
-+ PIN_FIELD_BASE(46, 46, 7, 0x00, 0x10, 12, 3),
-+ PIN_FIELD_BASE(47, 47, 7, 0x00, 0x10, 15, 3),
-+ PIN_FIELD_BASE(48, 48, 7, 0x00, 0x10, 18, 3),
-+ PIN_FIELD_BASE(49, 49, 7, 0x00, 0x10, 6, 3),
-+
-+ PIN_FIELD_BASE(50, 50, 6, 0x00, 0x10, 0, 3),
-+ PIN_FIELD_BASE(51, 51, 6, 0x00, 0x10, 6, 3),
-+ PIN_FIELD_BASE(52, 52, 6, 0x00, 0x10, 9, 3),
-+ PIN_FIELD_BASE(53, 53, 6, 0x00, 0x10, 12, 3),
-+ PIN_FIELD_BASE(54, 54, 6, 0x00, 0x10, 15, 3),
-+ PIN_FIELD_BASE(55, 55, 6, 0x00, 0x10, 18, 3),
-+ PIN_FIELD_BASE(56, 56, 6, 0x00, 0x10, 3, 3),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_pupd_range[] = {
-+ PIN_FIELD_BASE(0, 0, 1, 0x20, 0x10, 1, 1),
-+ PIN_FIELD_BASE(1, 1, 1, 0x20, 0x10, 0, 1),
-+ PIN_FIELD_BASE(2, 2, 5, 0x30, 0x10, 6, 1),
-+ PIN_FIELD_BASE(3, 3, 4, 0x30, 0x10, 6, 1),
-+ PIN_FIELD_BASE(4, 4, 4, 0x30, 0x10, 2, 1),
-+ PIN_FIELD_BASE(5, 5, 4, 0x30, 0x10, 1, 1),
-+ PIN_FIELD_BASE(6, 6, 4, 0x30, 0x10, 3, 1),
-+ PIN_FIELD_BASE(7, 7, 4, 0x30, 0x10, 0, 1),
-+ PIN_FIELD_BASE(8, 8, 4, 0x30, 0x10, 4, 1),
-+
-+ PIN_FIELD_BASE(9, 9, 5, 0x30, 0x10, 9, 1),
-+ PIN_FIELD_BASE(10, 10, 5, 0x30, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 5, 0x30, 0x10, 10, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x30, 0x10, 7, 1),
-+ PIN_FIELD_BASE(13, 13, 5, 0x30, 0x10, 11, 1),
-+
-+ PIN_FIELD_BASE(14, 14, 4, 0x30, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(15, 15, 2, 0x30, 0x10, 0, 1),
-+ PIN_FIELD_BASE(16, 16, 2, 0x30, 0x10, 1, 1),
-+ PIN_FIELD_BASE(17, 17, 2, 0x30, 0x10, 5, 1),
-+ PIN_FIELD_BASE(18, 18, 2, 0x30, 0x10, 4, 1),
-+ PIN_FIELD_BASE(19, 19, 2, 0x30, 0x10, 2, 1),
-+ PIN_FIELD_BASE(20, 20, 2, 0x90, 0x10, 3, 1),
-+ PIN_FIELD_BASE(21, 21, 2, 0x30, 0x10, 6, 1),
-+ PIN_FIELD_BASE(22, 22, 2, 0x30, 0x10, 7, 1),
-+ PIN_FIELD_BASE(23, 23, 2, 0x30, 0x10, 10, 1),
-+ PIN_FIELD_BASE(24, 24, 2, 0x30, 0x10, 9, 1),
-+ PIN_FIELD_BASE(25, 25, 2, 0x30, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(26, 26, 5, 0x30, 0x10, 0, 1),
-+ PIN_FIELD_BASE(27, 27, 5, 0x30, 0x10, 4, 1),
-+ PIN_FIELD_BASE(28, 28, 5, 0x30, 0x10, 3, 1),
-+ PIN_FIELD_BASE(29, 29, 5, 0x30, 0x10, 1, 1),
-+ PIN_FIELD_BASE(30, 30, 5, 0x30, 0x10, 2, 1),
-+ PIN_FIELD_BASE(31, 31, 5, 0x30, 0x10, 5, 1),
-+
-+ PIN_FIELD_BASE(32, 32, 1, 0x20, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 1, 0x20, 0x10, 3, 1),
-+
-+ PIN_FIELD_BASE(34, 34, 4, 0x30, 0x10, 5, 1),
-+ PIN_FIELD_BASE(35, 35, 4, 0x30, 0x10, 7, 1),
-+
-+ PIN_FIELD_BASE(36, 36, 3, 0x20, 0x10, 2, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x20, 0x10, 3, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x20, 0x10, 0, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x20, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_r0_range[] = {
-+ PIN_FIELD_BASE(0, 0, 1, 0x30, 0x10, 1, 1),
-+ PIN_FIELD_BASE(1, 1, 1, 0x30, 0x10, 0, 1),
-+ PIN_FIELD_BASE(2, 2, 5, 0x40, 0x10, 6, 1),
-+ PIN_FIELD_BASE(3, 3, 4, 0x40, 0x10, 6, 1),
-+ PIN_FIELD_BASE(4, 4, 4, 0x40, 0x10, 2, 1),
-+ PIN_FIELD_BASE(5, 5, 4, 0x40, 0x10, 1, 1),
-+ PIN_FIELD_BASE(6, 6, 4, 0x40, 0x10, 3, 1),
-+ PIN_FIELD_BASE(7, 7, 4, 0x40, 0x10, 0, 1),
-+ PIN_FIELD_BASE(8, 8, 4, 0x40, 0x10, 4, 1),
-+
-+ PIN_FIELD_BASE(9, 9, 5, 0x40, 0x10, 9, 1),
-+ PIN_FIELD_BASE(10, 10, 5, 0x40, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 5, 0x40, 0x10, 10, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x40, 0x10, 7, 1),
-+ PIN_FIELD_BASE(13, 13, 5, 0x40, 0x10, 11, 1),
-+
-+ PIN_FIELD_BASE(14, 14, 4, 0x40, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(15, 15, 2, 0x40, 0x10, 0, 1),
-+ PIN_FIELD_BASE(16, 16, 2, 0x40, 0x10, 1, 1),
-+ PIN_FIELD_BASE(17, 17, 2, 0x40, 0x10, 5, 1),
-+ PIN_FIELD_BASE(18, 18, 2, 0x40, 0x10, 4, 1),
-+ PIN_FIELD_BASE(19, 19, 2, 0x40, 0x10, 2, 1),
-+ PIN_FIELD_BASE(20, 20, 2, 0x40, 0x10, 3, 1),
-+ PIN_FIELD_BASE(21, 21, 2, 0x40, 0x10, 6, 1),
-+ PIN_FIELD_BASE(22, 22, 2, 0x40, 0x10, 7, 1),
-+ PIN_FIELD_BASE(23, 23, 2, 0x40, 0x10, 10, 1),
-+ PIN_FIELD_BASE(24, 24, 2, 0x40, 0x10, 9, 1),
-+ PIN_FIELD_BASE(25, 25, 2, 0x40, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(26, 26, 5, 0x40, 0x10, 0, 1),
-+ PIN_FIELD_BASE(27, 27, 5, 0x40, 0x10, 4, 1),
-+ PIN_FIELD_BASE(28, 28, 5, 0x40, 0x10, 3, 1),
-+ PIN_FIELD_BASE(29, 29, 5, 0x40, 0x10, 1, 1),
-+ PIN_FIELD_BASE(30, 30, 5, 0x40, 0x10, 2, 1),
-+ PIN_FIELD_BASE(31, 31, 5, 0x40, 0x10, 5, 1),
-+
-+ PIN_FIELD_BASE(32, 32, 1, 0x30, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 1, 0x30, 0x10, 3, 1),
-+
-+ PIN_FIELD_BASE(34, 34, 4, 0x40, 0x10, 5, 1),
-+ PIN_FIELD_BASE(35, 35, 4, 0x40, 0x10, 7, 1),
-+
-+ PIN_FIELD_BASE(36, 36, 3, 0x30, 0x10, 2, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x30, 0x10, 3, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x30, 0x10, 0, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x30, 0x10, 1, 1),
-+};
-+
-+static const struct mtk_pin_field_calc mt7981_pin_r1_range[] = {
-+ PIN_FIELD_BASE(0, 0, 1, 0x40, 0x10, 1, 1),
-+ PIN_FIELD_BASE(1, 1, 1, 0x40, 0x10, 0, 1),
-+ PIN_FIELD_BASE(2, 2, 5, 0x50, 0x10, 6, 1),
-+ PIN_FIELD_BASE(3, 3, 4, 0x50, 0x10, 6, 1),
-+ PIN_FIELD_BASE(4, 4, 4, 0x50, 0x10, 2, 1),
-+ PIN_FIELD_BASE(5, 5, 4, 0x50, 0x10, 1, 1),
-+ PIN_FIELD_BASE(6, 6, 4, 0x50, 0x10, 3, 1),
-+ PIN_FIELD_BASE(7, 7, 4, 0x50, 0x10, 0, 1),
-+ PIN_FIELD_BASE(8, 8, 4, 0x50, 0x10, 4, 1),
-+
-+ PIN_FIELD_BASE(9, 9, 5, 0x50, 0x10, 9, 1),
-+ PIN_FIELD_BASE(10, 10, 5, 0x50, 0x10, 8, 1),
-+ PIN_FIELD_BASE(11, 11, 5, 0x50, 0x10, 10, 1),
-+ PIN_FIELD_BASE(12, 12, 5, 0x50, 0x10, 7, 1),
-+ PIN_FIELD_BASE(13, 13, 5, 0x50, 0x10, 11, 1),
-+
-+ PIN_FIELD_BASE(14, 14, 4, 0x50, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(15, 15, 2, 0x50, 0x10, 0, 1),
-+ PIN_FIELD_BASE(16, 16, 2, 0x50, 0x10, 1, 1),
-+ PIN_FIELD_BASE(17, 17, 2, 0x50, 0x10, 5, 1),
-+ PIN_FIELD_BASE(18, 18, 2, 0x50, 0x10, 4, 1),
-+ PIN_FIELD_BASE(19, 19, 2, 0x50, 0x10, 2, 1),
-+ PIN_FIELD_BASE(20, 20, 2, 0x50, 0x10, 3, 1),
-+ PIN_FIELD_BASE(21, 21, 2, 0x50, 0x10, 6, 1),
-+ PIN_FIELD_BASE(22, 22, 2, 0x50, 0x10, 7, 1),
-+ PIN_FIELD_BASE(23, 23, 2, 0x50, 0x10, 10, 1),
-+ PIN_FIELD_BASE(24, 24, 2, 0x50, 0x10, 9, 1),
-+ PIN_FIELD_BASE(25, 25, 2, 0x50, 0x10, 8, 1),
-+
-+ PIN_FIELD_BASE(26, 26, 5, 0x50, 0x10, 0, 1),
-+ PIN_FIELD_BASE(27, 27, 5, 0x50, 0x10, 4, 1),
-+ PIN_FIELD_BASE(28, 28, 5, 0x50, 0x10, 3, 1),
-+ PIN_FIELD_BASE(29, 29, 5, 0x50, 0x10, 1, 1),
-+ PIN_FIELD_BASE(30, 30, 5, 0x50, 0x10, 2, 1),
-+ PIN_FIELD_BASE(31, 31, 5, 0x50, 0x10, 5, 1),
-+
-+ PIN_FIELD_BASE(32, 32, 1, 0x40, 0x10, 2, 1),
-+ PIN_FIELD_BASE(33, 33, 1, 0x40, 0x10, 3, 1),
-+
-+ PIN_FIELD_BASE(34, 34, 4, 0x50, 0x10, 5, 1),
-+ PIN_FIELD_BASE(35, 35, 4, 0x50, 0x10, 7, 1),
-+
-+ PIN_FIELD_BASE(36, 36, 3, 0x40, 0x10, 2, 1),
-+ PIN_FIELD_BASE(37, 37, 3, 0x40, 0x10, 3, 1),
-+ PIN_FIELD_BASE(38, 38, 3, 0x40, 0x10, 0, 1),
-+ PIN_FIELD_BASE(39, 39, 3, 0x40, 0x10, 1, 1),
-+};
-+
-+static const unsigned int mt7981_pull_type[] = {
-+ MTK_PULL_PUPD_R1R0_TYPE,/*0*/ MTK_PULL_PUPD_R1R0_TYPE,/*1*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*2*/ MTK_PULL_PUPD_R1R0_TYPE,/*3*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*4*/ MTK_PULL_PUPD_R1R0_TYPE,/*5*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*6*/ MTK_PULL_PUPD_R1R0_TYPE,/*7*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*8*/ MTK_PULL_PUPD_R1R0_TYPE,/*9*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*10*/ MTK_PULL_PUPD_R1R0_TYPE,/*11*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*12*/ MTK_PULL_PUPD_R1R0_TYPE,/*13*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*14*/ MTK_PULL_PUPD_R1R0_TYPE,/*15*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*16*/ MTK_PULL_PUPD_R1R0_TYPE,/*17*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*18*/ MTK_PULL_PUPD_R1R0_TYPE,/*19*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*20*/ MTK_PULL_PUPD_R1R0_TYPE,/*21*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*22*/ MTK_PULL_PUPD_R1R0_TYPE,/*23*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*24*/ MTK_PULL_PUPD_R1R0_TYPE,/*25*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*26*/ MTK_PULL_PUPD_R1R0_TYPE,/*27*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*28*/ MTK_PULL_PUPD_R1R0_TYPE,/*29*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*30*/ MTK_PULL_PUPD_R1R0_TYPE,/*31*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*32*/ MTK_PULL_PUPD_R1R0_TYPE,/*33*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/
-+ MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/
-+ MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/
-+ MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/
-+ MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/
-+ MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/
-+ MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/
-+ MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/
-+ MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/
-+ MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/
-+ MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/
-+ MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/
-+ MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/
-+ MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/
-+ MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/
-+ MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/
-+ MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/
-+ MTK_PULL_PU_PD_TYPE,/*100*/
-+};
-+
-+static const struct mtk_pin_reg_calc mt7981_reg_cals[] = {
-+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7981_pin_mode_range),
-+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7981_pin_dir_range),
-+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7981_pin_di_range),
-+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7981_pin_do_range),
-+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7981_pin_smt_range),
-+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7981_pin_ies_range),
-+ [PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7981_pin_pu_range),
-+ [PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7981_pin_pd_range),
-+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7981_pin_drv_range),
-+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7981_pin_pupd_range),
-+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7981_pin_r0_range),
-+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7981_pin_r1_range),
-+};
-+
-+static const struct mtk_pin_desc mt7981_pins[] = {
-+ MT7981_PIN(0, "GPIO_WPS"),
-+ MT7981_PIN(1, "GPIO_RESET"),
-+ MT7981_PIN(2, "SYS_WATCHDOG"),
-+ MT7981_PIN(3, "PCIE_PERESET_N"),
-+ MT7981_PIN(4, "JTAG_JTDO"),
-+ MT7981_PIN(5, "JTAG_JTDI"),
-+ MT7981_PIN(6, "JTAG_JTMS"),
-+ MT7981_PIN(7, "JTAG_JTCLK"),
-+ MT7981_PIN(8, "JTAG_JTRST_N"),
-+ MT7981_PIN(9, "WO_JTAG_JTDO"),
-+ MT7981_PIN(10, "WO_JTAG_JTDI"),
-+ MT7981_PIN(11, "WO_JTAG_JTMS"),
-+ MT7981_PIN(12, "WO_JTAG_JTCLK"),
-+ MT7981_PIN(13, "WO_JTAG_JTRST_N"),
-+ MT7981_PIN(14, "USB_VBUS"),
-+ MT7981_PIN(15, "PWM0"),
-+ MT7981_PIN(16, "SPI0_CLK"),
-+ MT7981_PIN(17, "SPI0_MOSI"),
-+ MT7981_PIN(18, "SPI0_MISO"),
-+ MT7981_PIN(19, "SPI0_CS"),
-+ MT7981_PIN(20, "SPI0_HOLD"),
-+ MT7981_PIN(21, "SPI0_WP"),
-+ MT7981_PIN(22, "SPI1_CLK"),
-+ MT7981_PIN(23, "SPI1_MOSI"),
-+ MT7981_PIN(24, "SPI1_MISO"),
-+ MT7981_PIN(25, "SPI1_CS"),
-+ MT7981_PIN(26, "SPI2_CLK"),
-+ MT7981_PIN(27, "SPI2_MOSI"),
-+ MT7981_PIN(28, "SPI2_MISO"),
-+ MT7981_PIN(29, "SPI2_CS"),
-+ MT7981_PIN(30, "SPI2_HOLD"),
-+ MT7981_PIN(31, "SPI2_WP"),
-+ MT7981_PIN(32, "UART0_RXD"),
-+ MT7981_PIN(33, "UART0_TXD"),
-+ MT7981_PIN(34, "PCIE_CLK_REQ"),
-+ MT7981_PIN(35, "PCIE_WAKE_N"),
-+ MT7981_PIN(36, "SMI_MDC"),
-+ MT7981_PIN(37, "SMI_MDIO"),
-+ MT7981_PIN(38, "GBE_INT"),
-+ MT7981_PIN(39, "GBE_RESET"),
-+ MT7981_PIN(40, "WF_DIG_RESETB"),
-+ MT7981_PIN(41, "WF_CBA_RESETB"),
-+ MT7981_PIN(42, "WF_XO_REQ"),
-+ MT7981_PIN(43, "WF_TOP_CLK"),
-+ MT7981_PIN(44, "WF_TOP_DATA"),
-+ MT7981_PIN(45, "WF_HB1"),
-+ MT7981_PIN(46, "WF_HB2"),
-+ MT7981_PIN(47, "WF_HB3"),
-+ MT7981_PIN(48, "WF_HB4"),
-+ MT7981_PIN(49, "WF_HB0"),
-+ MT7981_PIN(50, "WF_HB0_B"),
-+ MT7981_PIN(51, "WF_HB5"),
-+ MT7981_PIN(52, "WF_HB6"),
-+ MT7981_PIN(53, "WF_HB7"),
-+ MT7981_PIN(54, "WF_HB8"),
-+ MT7981_PIN(55, "WF_HB9"),
-+ MT7981_PIN(56, "WF_HB10"),
-+};
-+
-+/* List all groups consisting of these pins dedicated to the enablement of
-+ * certain hardware block and the corresponding mode for all of the pins.
-+ * The hardware probably has multiple combinations of these pinouts.
-+ */
-+
-+/* WA_AICE */
-+static int mt7981_wa_aice1_pins[] = { 0, 1, };
-+static int mt7981_wa_aice1_funcs[] = { 2, 2, };
-+
-+static int mt7981_wa_aice2_pins[] = { 0, 1, };
-+static int mt7981_wa_aice2_funcs[] = { 3, 3, };
-+
-+static int mt7981_wa_aice3_pins[] = { 28, 29, };
-+static int mt7981_wa_aice3_funcs[] = { 3, 3, };
-+
-+static int mt7981_wm_aice1_pins[] = { 9, 10, };
-+static int mt7981_wm_aice1_funcs[] = { 2, 2, };
-+
-+static int mt7981_wm_aice2_pins[] = { 30, 31, };
-+static int mt7981_wm_aice2_funcs[] = { 5, 5, };
-+
-+/* WM_UART */
-+static int mt7981_wm_uart_0_pins[] = { 0, 1, };
-+static int mt7981_wm_uart_0_funcs[] = { 5, 5, };
-+
-+static int mt7981_wm_uart_1_pins[] = { 20, 21, };
-+static int mt7981_wm_uart_1_funcs[] = { 4, 4, };
-+
-+static int mt7981_wm_uart_2_pins[] = { 30, 31, };
-+static int mt7981_wm_uart_2_funcs[] = { 3, 3, };
-+
-+/* DFD */
-+static int mt7981_dfd_pins[] = { 0, 1, 4, 5, };
-+static int mt7981_dfd_funcs[] = { 5, 5, 6, 6, };
-+
-+/* SYS_WATCHDOG */
-+static int mt7981_watchdog_pins[] = { 2, };
-+static int mt7981_watchdog_funcs[] = { 1, };
-+
-+static int mt7981_watchdog1_pins[] = { 13, };
-+static int mt7981_watchdog1_funcs[] = { 5, };
-+
-+/* PCIE_PERESET_N */
-+static int mt7981_pcie_pereset_pins[] = { 3, };
-+static int mt7981_pcie_pereset_funcs[] = { 1, };
-+
-+/* JTAG */
-+static int mt7981_jtag_pins[] = { 4, 5, 6, 7, 8, };
-+static int mt7981_jtag_funcs[] = { 1, 1, 1, 1, 1, };
-+
-+/* WM_JTAG */
-+static int mt7981_wm_jtag_0_pins[] = { 4, 5, 6, 7, 8, };
-+static int mt7981_wm_jtag_0_funcs[] = { 2, 2, 2, 2, 2, };
-+
-+static int mt7981_wm_jtag_1_pins[] = { 20, 21, 22, 23, 24, };
-+static int mt7981_wm_jtag_1_funcs[] = { 5, 5, 5, 5, 5, };
-+
-+/* WO0_JTAG */
-+static int mt7981_wo0_jtag_0_pins[] = { 9, 10, 11, 12, 13, };
-+static int mt7981_wo0_jtag_0_funcs[] = { 1, 1, 1, 1, 1, };
-+
-+static int mt7981_wo0_jtag_1_pins[] = { 25, 26, 27, 28, 29, };
-+static int mt7981_wo0_jtag_1_funcs[] = { 5, 5, 5, 5, 5, };
-+
-+/* UART2 */
-+static int mt7981_uart2_0_pins[] = { 4, 5, 6, 7, };
-+static int mt7981_uart2_0_funcs[] = { 3, 3, 3, 3, };
-+
-+/* GBE_LED0 */
-+static int mt7981_gbe_led0_pins[] = { 8, };
-+static int mt7981_gbe_led0_funcs[] = { 3, };
-+
-+/* PTA_EXT */
-+static int mt7981_pta_ext_0_pins[] = { 4, 5, 6, };
-+static int mt7981_pta_ext_0_funcs[] = { 4, 4, 4, };
-+
-+static int mt7981_pta_ext_1_pins[] = { 22, 23, 24, };
-+static int mt7981_pta_ext_1_funcs[] = { 4, 4, 4, };
-+
-+/* PWM2 */
-+static int mt7981_pwm2_pins[] = { 7, };
-+static int mt7981_pwm2_funcs[] = { 4, };
-+
-+/* NET_WO0_UART_TXD */
-+static int mt7981_net_wo0_uart_txd_0_pins[] = { 8, };
-+static int mt7981_net_wo0_uart_txd_0_funcs[] = { 4, };
-+
-+static int mt7981_net_wo0_uart_txd_1_pins[] = { 14, };
-+static int mt7981_net_wo0_uart_txd_1_funcs[] = { 3, };
-+
-+static int mt7981_net_wo0_uart_txd_2_pins[] = { 15, };
-+static int mt7981_net_wo0_uart_txd_2_funcs[] = { 4, };
-+
-+/* SPI1 */
-+static int mt7981_spi1_0_pins[] = { 4, 5, 6, 7, };
-+static int mt7981_spi1_0_funcs[] = { 5, 5, 5, 5, };
-+
-+/* I2C */
-+static int mt7981_i2c0_0_pins[] = { 6, 7, };
-+static int mt7981_i2c0_0_funcs[] = { 6, 6, };
-+
-+static int mt7981_i2c0_1_pins[] = { 30, 31, };
-+static int mt7981_i2c0_1_funcs[] = { 4, 4, };
-+
-+static int mt7981_i2c0_2_pins[] = { 36, 37, };
-+static int mt7981_i2c0_2_funcs[] = { 2, 2, };
-+
-+static int mt7981_u2_phy_i2c_pins[] = { 30, 31, };
-+static int mt7981_u2_phy_i2c_funcs[] = { 6, 6, };
-+
-+static int mt7981_u3_phy_i2c_pins[] = { 32, 33, };
-+static int mt7981_u3_phy_i2c_funcs[] = { 3, 3, };
-+
-+static int mt7981_sgmii1_phy_i2c_pins[] = { 32, 33, };
-+static int mt7981_sgmii1_phy_i2c_funcs[] = { 2, 2, };
-+
-+static int mt7981_sgmii0_phy_i2c_pins[] = { 32, 33, };
-+static int mt7981_sgmii0_phy_i2c_funcs[] = { 5, 5, };
-+
-+/* DFD_NTRST */
-+static int mt7981_dfd_ntrst_pins[] = { 8, };
-+static int mt7981_dfd_ntrst_funcs[] = { 6, };
-+
-+/* PWM0 */
-+static int mt7981_pwm0_0_pins[] = { 13, };
-+static int mt7981_pwm0_0_funcs[] = { 2, };
-+
-+static int mt7981_pwm0_1_pins[] = { 15, };
-+static int mt7981_pwm0_1_funcs[] = { 1, };
-+
-+/* PWM1 */
-+static int mt7981_pwm1_0_pins[] = { 14, };
-+static int mt7981_pwm1_0_funcs[] = { 2, };
-+
-+static int mt7981_pwm1_1_pins[] = { 15, };
-+static int mt7981_pwm1_1_funcs[] = { 3, };
-+
-+/* GBE_LED1 */
-+static int mt7981_gbe_led1_pins[] = { 13, };
-+static int mt7981_gbe_led1_funcs[] = { 3, };
-+
-+/* PCM */
-+static int mt7981_pcm_pins[] = { 9, 10, 11, 12, 13, 25 };
-+static int mt7981_pcm_funcs[] = { 4, 4, 4, 4, 4, 4, };
-+
-+/* UDI */
-+static int mt7981_udi_pins[] = { 9, 10, 11, 12, 13, };
-+static int mt7981_udi_funcs[] = { 6, 6, 6, 6, 6, };
-+
-+/* DRV_VBUS */
-+static int mt7981_drv_vbus_pins[] = { 14, };
-+static int mt7981_drv_vbus_funcs[] = { 1, };
-+
-+/* EMMC */
-+static int mt7981_emmc_45_pins[] = { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, };
-+static int mt7981_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
-+
-+/* SNFI */
-+static int mt7981_snfi_pins[] = { 16, 17, 18, 19, 20, 21, };
-+static int mt7981_snfi_funcs[] = { 3, 3, 3, 3, 3, 3, };
-+
-+/* SPI0 */
-+static int mt7981_spi0_pins[] = { 16, 17, 18, 19, };
-+static int mt7981_spi0_funcs[] = { 1, 1, 1, 1, };
-+
-+/* SPI0 */
-+static int mt7981_spi0_wp_hold_pins[] = { 20, 21, };
-+static int mt7981_spi0_wp_hold_funcs[] = { 1, 1, };
-+
-+/* SPI1 */
-+static int mt7981_spi1_1_pins[] = { 22, 23, 24, 25, };
-+static int mt7981_spi1_1_funcs[] = { 1, 1, 1, 1, };
-+
-+/* SPI2 */
-+static int mt7981_spi2_pins[] = { 26, 27, 28, 29, };
-+static int mt7981_spi2_funcs[] = { 1, 1, 1, 1, };
-+
-+/* SPI2 */
-+static int mt7981_spi2_wp_hold_pins[] = { 30, 31, };
-+static int mt7981_spi2_wp_hold_funcs[] = { 1, 1, };
-+
-+/* UART1 */
-+static int mt7981_uart1_0_pins[] = { 16, 17, 18, 19, };
-+static int mt7981_uart1_0_funcs[] = { 4, 4, 4, 4, };
-+
-+static int mt7981_uart1_1_pins[] = { 26, 27, 28, 29, };
-+static int mt7981_uart1_1_funcs[] = { 2, 2, 2, 2, };
-+
-+/* UART2 */
-+static int mt7981_uart2_1_pins[] = { 22, 23, 24, 25, };
-+static int mt7981_uart2_1_funcs[] = { 3, 3, 3, 3, };
-+
-+/* UART0 */
-+static int mt7981_uart0_pins[] = { 32, 33, };
-+static int mt7981_uart0_funcs[] = { 1, 1, };
-+
-+/* PCIE_CLK_REQ */
-+static int mt7981_pcie_clk_pins[] = { 34, };
-+static int mt7981_pcie_clk_funcs[] = { 2, };
-+
-+/* PCIE_WAKE_N */
-+static int mt7981_pcie_wake_pins[] = { 35, };
-+static int mt7981_pcie_wake_funcs[] = { 2, };
-+
-+/* MDC_MDIO */
-+static int mt7981_smi_mdc_mdio_pins[] = { 36, 37, };
-+static int mt7981_smi_mdc_mdio_funcs[] = { 1, 1, };
-+
-+static int mt7981_gbe_ext_mdc_mdio_pins[] = { 36, 37, };
-+static int mt7981_gbe_ext_mdc_mdio_funcs[] = { 3, 3, };
-+
-+/* WF0_MODE1 */
-+static int mt7981_wf0_mode1_pins[] = { 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56 };
-+static int mt7981_wf0_mode1_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 };
-+
-+/* WF0_MODE3 */
-+static int mt7981_wf0_mode3_pins[] = { 45, 46, 47, 48, 49, 51 };
-+static int mt7981_wf0_mode3_funcs[] = { 2, 2, 2, 2, 2, 2 };
-+
-+/* WF2G_LED */
-+static int mt7981_wf2g_led0_pins[] = { 30, };
-+static int mt7981_wf2g_led0_funcs[] = { 2, };
-+
-+static int mt7981_wf2g_led1_pins[] = { 34, };
-+static int mt7981_wf2g_led1_funcs[] = { 1, };
-+
-+/* WF5G_LED */
-+static int mt7981_wf5g_led0_pins[] = { 31, };
-+static int mt7981_wf5g_led0_funcs[] = { 2, };
-+
-+static int mt7981_wf5g_led1_pins[] = { 35, };
-+static int mt7981_wf5g_led1_funcs[] = { 1, };
-+
-+/* MT7531_INT */
-+static int mt7981_mt7531_int_pins[] = { 38, };
-+static int mt7981_mt7531_int_funcs[] = { 1, };
-+
-+/* ANT_SEL */
-+static int mt7981_ant_sel_pins[] = { 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 34, 35 };
-+static int mt7981_ant_sel_funcs[] = { 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6 };
-+
-+static const struct group_desc mt7981_groups[] = {
-+ /* @GPIO(0,1): WA_AICE(2) */
-+ PINCTRL_PIN_GROUP("wa_aice1", mt7981_wa_aice1),
-+ /* @GPIO(0,1): WA_AICE(3) */
-+ PINCTRL_PIN_GROUP("wa_aice2", mt7981_wa_aice2),
-+ /* @GPIO(0,1): WM_UART(5) */
-+ PINCTRL_PIN_GROUP("wm_uart_0", mt7981_wm_uart_0),
-+ /* @GPIO(0,1,4,5): DFD(6) */
-+ PINCTRL_PIN_GROUP("dfd", mt7981_dfd),
-+ /* @GPIO(2): SYS_WATCHDOG(1) */
-+ PINCTRL_PIN_GROUP("watchdog", mt7981_watchdog),
-+ /* @GPIO(3): PCIE_PERESET_N(1) */
-+ PINCTRL_PIN_GROUP("pcie_pereset", mt7981_pcie_pereset),
-+ /* @GPIO(4,8) JTAG(1) */
-+ PINCTRL_PIN_GROUP("jtag", mt7981_jtag),
-+ /* @GPIO(4,8) WM_JTAG(2) */
-+ PINCTRL_PIN_GROUP("wm_jtag_0", mt7981_wm_jtag_0),
-+ /* @GPIO(9,13) WO0_JTAG(1) */
-+ PINCTRL_PIN_GROUP("wo0_jtag_0", mt7981_wo0_jtag_0),
-+ /* @GPIO(4,7) WM_JTAG(3) */
-+ PINCTRL_PIN_GROUP("uart2_0", mt7981_uart2_0),
-+ /* @GPIO(8) GBE_LED0(3) */
-+ PINCTRL_PIN_GROUP("gbe_led0", mt7981_gbe_led0),
-+ /* @GPIO(4,6) PTA_EXT(4) */
-+ PINCTRL_PIN_GROUP("pta_ext_0", mt7981_pta_ext_0),
-+ /* @GPIO(7) PWM2(4) */
-+ PINCTRL_PIN_GROUP("pwm2", mt7981_pwm2),
-+ /* @GPIO(8) NET_WO0_UART_TXD(4) */
-+ PINCTRL_PIN_GROUP("net_wo0_uart_txd_0", mt7981_net_wo0_uart_txd_0),
-+ /* @GPIO(4,7) SPI1(5) */
-+ PINCTRL_PIN_GROUP("spi1_0", mt7981_spi1_0),
-+ /* @GPIO(6,7) I2C(5) */
-+ PINCTRL_PIN_GROUP("i2c0_0", mt7981_i2c0_0),
-+ /* @GPIO(0,1,4,5): DFD_NTRST(6) */
-+ PINCTRL_PIN_GROUP("dfd_ntrst", mt7981_dfd_ntrst),
-+ /* @GPIO(9,10): WM_AICE(2) */
-+ PINCTRL_PIN_GROUP("wm_aice1", mt7981_wm_aice1),
-+ /* @GPIO(13): PWM0(2) */
-+ PINCTRL_PIN_GROUP("pwm0_0", mt7981_pwm0_0),
-+ /* @GPIO(15): PWM0(1) */
-+ PINCTRL_PIN_GROUP("pwm0_1", mt7981_pwm0_1),
-+ /* @GPIO(14): PWM1(2) */
-+ PINCTRL_PIN_GROUP("pwm1_0", mt7981_pwm1_0),
-+ /* @GPIO(15): PWM1(3) */
-+ PINCTRL_PIN_GROUP("pwm1_1", mt7981_pwm1_1),
-+ /* @GPIO(14) NET_WO0_UART_TXD(3) */
-+ PINCTRL_PIN_GROUP("net_wo0_uart_txd_1", mt7981_net_wo0_uart_txd_1),
-+ /* @GPIO(15) NET_WO0_UART_TXD(4) */
-+ PINCTRL_PIN_GROUP("net_wo0_uart_txd_2", mt7981_net_wo0_uart_txd_2),
-+ /* @GPIO(13) GBE_LED0(3) */
-+ PINCTRL_PIN_GROUP("gbe_led1", mt7981_gbe_led1),
-+ /* @GPIO(9,13) PCM(4) */
-+ PINCTRL_PIN_GROUP("pcm", mt7981_pcm),
-+ /* @GPIO(13): SYS_WATCHDOG1(5) */
-+ PINCTRL_PIN_GROUP("watchdog1", mt7981_watchdog1),
-+ /* @GPIO(9,13) UDI(4) */
-+ PINCTRL_PIN_GROUP("udi", mt7981_udi),
-+ /* @GPIO(14) DRV_VBUS(1) */
-+ PINCTRL_PIN_GROUP("drv_vbus", mt7981_drv_vbus),
-+ /* @GPIO(15,25): EMMC(2) */
-+ PINCTRL_PIN_GROUP("emmc_45", mt7981_emmc_45),
-+ /* @GPIO(16,21): SNFI(3) */
-+ PINCTRL_PIN_GROUP("snfi", mt7981_snfi),
-+ /* @GPIO(16,19): SPI0(1) */
-+ PINCTRL_PIN_GROUP("spi0", mt7981_spi0),
-+ /* @GPIO(20,21): SPI0(1) */
-+ PINCTRL_PIN_GROUP("spi0_wp_hold", mt7981_spi0_wp_hold),
-+ /* @GPIO(22,25) SPI1(1) */
-+ PINCTRL_PIN_GROUP("spi1_1", mt7981_spi1_1),
-+ /* @GPIO(26,29): SPI2(1) */
-+ PINCTRL_PIN_GROUP("spi2", mt7981_spi2),
-+ /* @GPIO(30,31): SPI0(1) */
-+ PINCTRL_PIN_GROUP("spi2_wp_hold", mt7981_spi2_wp_hold),
-+ /* @GPIO(16,19): UART1(4) */
-+ PINCTRL_PIN_GROUP("uart1_0", mt7981_uart1_0),
-+ /* @GPIO(26,29): UART1(2) */
-+ PINCTRL_PIN_GROUP("uart1_1", mt7981_uart1_1),
-+ /* @GPIO(22,25): UART1(3) */
-+ PINCTRL_PIN_GROUP("uart2_1", mt7981_uart2_1),
-+ /* @GPIO(22,24) PTA_EXT(4) */
-+ PINCTRL_PIN_GROUP("pta_ext_1", mt7981_pta_ext_1),
-+ /* @GPIO(20,21): WM_UART(4) */
-+ PINCTRL_PIN_GROUP("wm_aurt_1", mt7981_wm_uart_1),
-+ /* @GPIO(30,31): WM_UART(3) */
-+ PINCTRL_PIN_GROUP("wm_aurt_2", mt7981_wm_uart_2),
-+ /* @GPIO(20,24) WM_JTAG(5) */
-+ PINCTRL_PIN_GROUP("wm_jtag_1", mt7981_wm_jtag_1),
-+ /* @GPIO(25,29) WO0_JTAG(5) */
-+ PINCTRL_PIN_GROUP("wo0_jtag_1", mt7981_wo0_jtag_1),
-+ /* @GPIO(28,29): WA_AICE(3) */
-+ PINCTRL_PIN_GROUP("wa_aice3", mt7981_wa_aice3),
-+ /* @GPIO(30,31): WM_AICE(5) */
-+ PINCTRL_PIN_GROUP("wm_aice2", mt7981_wm_aice2),
-+ /* @GPIO(30,31): I2C(4) */
-+ PINCTRL_PIN_GROUP("i2c0_1", mt7981_i2c0_1),
-+ /* @GPIO(30,31): I2C(6) */
-+ PINCTRL_PIN_GROUP("u2_phy_i2c", mt7981_u2_phy_i2c),
-+ /* @GPIO(32,33): I2C(1) */
-+ PINCTRL_PIN_GROUP("uart0", mt7981_uart0),
-+ /* @GPIO(32,33): I2C(2) */
-+ PINCTRL_PIN_GROUP("sgmii1_phy_i2c", mt7981_sgmii1_phy_i2c),
-+ /* @GPIO(32,33): I2C(3) */
-+ PINCTRL_PIN_GROUP("u3_phy_i2c", mt7981_u3_phy_i2c),
-+ /* @GPIO(32,33): I2C(5) */
-+ PINCTRL_PIN_GROUP("sgmii0_phy_i2c", mt7981_sgmii0_phy_i2c),
-+ /* @GPIO(34): PCIE_CLK_REQ(2) */
-+ PINCTRL_PIN_GROUP("pcie_clk", mt7981_pcie_clk),
-+ /* @GPIO(35): PCIE_WAKE_N(2) */
-+ PINCTRL_PIN_GROUP("pcie_wake", mt7981_pcie_wake),
-+ /* @GPIO(36,37): I2C(2) */
-+ PINCTRL_PIN_GROUP("i2c0_2", mt7981_i2c0_2),
-+ /* @GPIO(36,37): MDC_MDIO(1) */
-+ PINCTRL_PIN_GROUP("smi_mdc_mdio", mt7981_smi_mdc_mdio),
-+ /* @GPIO(36,37): MDC_MDIO(3) */
-+ PINCTRL_PIN_GROUP("gbe_ext_mdc_mdio", mt7981_gbe_ext_mdc_mdio),
-+ /* @GPIO(69,85): WF0_MODE1(1) */
-+ PINCTRL_PIN_GROUP("wf0_mode1", mt7981_wf0_mode1),
-+ /* @GPIO(74,80): WF0_MODE3(3) */
-+ PINCTRL_PIN_GROUP("wf0_mode3", mt7981_wf0_mode3),
-+ /* @GPIO(30): WF2G_LED(2) */
-+ PINCTRL_PIN_GROUP("wf2g_led0", mt7981_wf2g_led0),
-+ /* @GPIO(34): WF2G_LED(1) */
-+ PINCTRL_PIN_GROUP("wf2g_led1", mt7981_wf2g_led1),
-+ /* @GPIO(31): WF5G_LED(2) */
-+ PINCTRL_PIN_GROUP("wf5g_led0", mt7981_wf5g_led0),
-+ /* @GPIO(35): WF5G_LED(1) */
-+ PINCTRL_PIN_GROUP("wf5g_led1", mt7981_wf5g_led1),
-+ /* @GPIO(38): MT7531_INT(1) */
-+ PINCTRL_PIN_GROUP("mt7531_int", mt7981_mt7531_int),
-+ /* @GPIO(14,15,26,17,18,19,20,21,22,23,24,25,34,35): ANT_SEL(1) */
-+ PINCTRL_PIN_GROUP("ant_sel", mt7981_ant_sel),
-+};
-+
-+/* Joint those groups owning the same capability in user point of view which
-+ * allows that people tend to use through the device tree.
-+ */
-+static const char *mt7981_wa_aice_groups[] = { "wa_aice1", "wa_aice2", "wm_aice1_1",
-+ "wa_aice3", "wm_aice1_2", };
-+static const char *mt7981_uart_groups[] = { "wm_uart_0", "uart2_0",
-+ "net_wo0_uart_txd_0", "net_wo0_uart_txd_1", "net_wo0_uart_txd_2",
-+ "uart1_0", "uart1_1", "uart2_1", "wm_aurt_1", "wm_aurt_2", "uart0", };
-+static const char *mt7981_dfd_groups[] = { "dfd", "dfd_ntrst", };
-+static const char *mt7981_wdt_groups[] = { "watchdog", "watchdog1", };
-+static const char *mt7981_pcie_groups[] = { "pcie_pereset", "pcie_clk", "pcie_wake", };
-+static const char *mt7981_jtag_groups[] = { "jtag", "wm_jtag_0", "wo0_jtag_0",
-+ "wo0_jtag_1", "wm_jtag_1", };
-+static const char *mt7981_led_groups[] = { "gbe_led0", "gbe_led1", "wf2g_led0",
-+ "wf2g_led1", "wf5g_led0", "wf5g_led1", };
-+static const char *mt7981_pta_groups[] = { "pta_ext_0", "pta_ext_1", };
-+static const char *mt7981_pwm_groups[] = { "pwm2", "pwm0_0", "pwm0_1",
-+ "pwm1_0", "pwm1_1", };
-+static const char *mt7981_spi_groups[] = { "spi1_0", "spi0", "spi0_wp_hold", "spi1_1", "spi2",
-+ "spi2_wp_hold", };
-+static const char *mt7981_i2c_groups[] = { "i2c0_0", "i2c0_1", "u2_phy_i2c",
-+ "sgmii1_phy_i2c", "u3_phy_i2c", "sgmii0_phy_i2c", "i2c0_2", };
-+static const char *mt7981_pcm_groups[] = { "pcm", };
-+static const char *mt7981_udi_groups[] = { "udi", };
-+static const char *mt7981_usb_groups[] = { "drv_vbus", };
-+static const char *mt7981_flash_groups[] = { "emmc_45", "snfi", };
-+static const char *mt7981_ethernet_groups[] = { "smi_mdc_mdio", "gbe_ext_mdc_mdio",
-+ "wf0_mode1", "wf0_mode3", "mt7531_int", };
-+static const char *mt7981_ant_groups[] = { "ant_sel", };
-+
-+static const struct function_desc mt7981_functions[] = {
-+ {"wa_aice", mt7981_wa_aice_groups, ARRAY_SIZE(mt7981_wa_aice_groups)},
-+ {"dfd", mt7981_dfd_groups, ARRAY_SIZE(mt7981_dfd_groups)},
-+ {"jtag", mt7981_jtag_groups, ARRAY_SIZE(mt7981_jtag_groups)},
-+ {"pta", mt7981_pta_groups, ARRAY_SIZE(mt7981_pta_groups)},
-+ {"pcm", mt7981_pcm_groups, ARRAY_SIZE(mt7981_pcm_groups)},
-+ {"udi", mt7981_udi_groups, ARRAY_SIZE(mt7981_udi_groups)},
-+ {"usb", mt7981_usb_groups, ARRAY_SIZE(mt7981_usb_groups)},
-+ {"ant", mt7981_ant_groups, ARRAY_SIZE(mt7981_ant_groups)},
-+ {"eth", mt7981_ethernet_groups, ARRAY_SIZE(mt7981_ethernet_groups)},
-+ {"i2c", mt7981_i2c_groups, ARRAY_SIZE(mt7981_i2c_groups)},
-+ {"led", mt7981_led_groups, ARRAY_SIZE(mt7981_led_groups)},
-+ {"pwm", mt7981_pwm_groups, ARRAY_SIZE(mt7981_pwm_groups)},
-+ {"spi", mt7981_spi_groups, ARRAY_SIZE(mt7981_spi_groups)},
-+ {"uart", mt7981_uart_groups, ARRAY_SIZE(mt7981_uart_groups)},
-+ {"watchdog", mt7981_wdt_groups, ARRAY_SIZE(mt7981_wdt_groups)},
-+ {"flash", mt7981_flash_groups, ARRAY_SIZE(mt7981_flash_groups)},
-+ {"pcie", mt7981_pcie_groups, ARRAY_SIZE(mt7981_pcie_groups)},
-+};
-+
-+static const struct mtk_eint_hw mt7981_eint_hw = {
-+ .port_mask = 7,
-+ .ports = 7,
-+ .ap_num = ARRAY_SIZE(mt7981_pins),
-+ .db_cnt = 16,
-+};
-+
-+static const char * const mt7981_pinctrl_register_base_names[] = {
-+ "gpio", "iocfg_rt", "iocfg_rm", "iocfg_rb",
-+ "iocfg_lb", "iocfg_bl", "iocfg_tm", "iocfg_tl",
-+};
-+
-+static struct mtk_pin_soc mt7981_data = {
-+ .reg_cal = mt7981_reg_cals,
-+ .pins = mt7981_pins,
-+ .npins = ARRAY_SIZE(mt7981_pins),
-+ .grps = mt7981_groups,
-+ .ngrps = ARRAY_SIZE(mt7981_groups),
-+ .funcs = mt7981_functions,
-+ .nfuncs = ARRAY_SIZE(mt7981_functions),
-+ .eint_hw = &mt7981_eint_hw,
-+ .gpio_m = 0,
-+ .ies_present = false,
-+ .base_names = mt7981_pinctrl_register_base_names,
-+ .nbase_names = ARRAY_SIZE(mt7981_pinctrl_register_base_names),
-+ .pull_type = mt7981_pull_type,
-+ .bias_set_combo = mtk_pinconf_bias_set_combo,
-+ .bias_get_combo = mtk_pinconf_bias_get_combo,
-+ .drive_set = mtk_pinconf_drive_set_rev1,
-+ .drive_get = mtk_pinconf_drive_get_rev1,
-+ .adv_pull_get = mtk_pinconf_adv_pull_get,
-+ .adv_pull_set = mtk_pinconf_adv_pull_set,
-+};
-+
-+static const struct of_device_id mt7981_pinctrl_of_match[] = {
-+ { .compatible = "mediatek,mt7981-pinctrl", },
-+ {}
-+};
-+
-+static int mt7981_pinctrl_probe(struct platform_device *pdev)
-+{
-+ return mtk_moore_pinctrl_probe(pdev, &mt7981_data);
-+}
-+
-+static struct platform_driver mt7981_pinctrl_driver = {
-+ .driver = {
-+ .name = "mt7981-pinctrl",
-+ .of_match_table = mt7981_pinctrl_of_match,
-+ },
-+ .probe = mt7981_pinctrl_probe,
-+};
-+
-+static int __init mt7981_pinctrl_init(void)
-+{
-+ return platform_driver_register(&mt7981_pinctrl_driver);
-+}
-+arch_initcall(mt7981_pinctrl_init);
+++ /dev/null
-From c0ad453e94e5c404efbcf668648d07eaa1a71ed7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Sat, 18 Feb 2023 09:51:06 +0300
-Subject: [PATCH] pinctrl: mediatek: add missing options to PINCTRL_MT7981
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are options missing from PINCTRL_MT7981 whilst being on every other
-pin controller. Add them.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Acked-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230218065108.8958-1-arinc.unal@arinc9.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/pinctrl/mediatek/Kconfig
-+++ b/drivers/pinctrl/mediatek/Kconfig
-@@ -130,6 +130,8 @@ config PINCTRL_MT7622
- config PINCTRL_MT7981
- bool "Mediatek MT7981 pin control"
- depends on OF
-+ depends on ARM64 || COMPILE_TEST
-+ default ARM64 && ARCH_MEDIATEK
- select PINCTRL_MTK_MOORE
-
- config PINCTRL_MT7986
+++ /dev/null
-From 8f6f16fe1553ce63edfb98a39ef9d4754a0c39bf Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 18 Aug 2023 04:02:35 +0100
-Subject: [PATCH] pinctrl: mediatek: fix pull_type data for MT7981
-
-MediaTek has released pull_type data for MT7981 in their SDK.
-Use it and set functions to configure pin bias.
-
-Fixes: 6c83b2d94fcc ("pinctrl: add mt7981 pinctrl driver")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/7bcc8ead25dbfabc7f5a85d066224a926fbb4941.1692327317.git.daniel@makrotopia.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7981.c | 44 +++++++----------------
- 1 file changed, 13 insertions(+), 31 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7981.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7981.c
-@@ -457,37 +457,15 @@ static const unsigned int mt7981_pull_ty
- MTK_PULL_PUPD_R1R0_TYPE,/*34*/ MTK_PULL_PUPD_R1R0_TYPE,/*35*/
- MTK_PULL_PUPD_R1R0_TYPE,/*36*/ MTK_PULL_PUPD_R1R0_TYPE,/*37*/
- MTK_PULL_PUPD_R1R0_TYPE,/*38*/ MTK_PULL_PUPD_R1R0_TYPE,/*39*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*40*/ MTK_PULL_PUPD_R1R0_TYPE,/*41*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*42*/ MTK_PULL_PUPD_R1R0_TYPE,/*43*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*44*/ MTK_PULL_PUPD_R1R0_TYPE,/*45*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*46*/ MTK_PULL_PUPD_R1R0_TYPE,/*47*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*48*/ MTK_PULL_PUPD_R1R0_TYPE,/*49*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*50*/ MTK_PULL_PUPD_R1R0_TYPE,/*51*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*52*/ MTK_PULL_PUPD_R1R0_TYPE,/*53*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*54*/ MTK_PULL_PUPD_R1R0_TYPE,/*55*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*56*/ MTK_PULL_PUPD_R1R0_TYPE,/*57*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*58*/ MTK_PULL_PUPD_R1R0_TYPE,/*59*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*60*/ MTK_PULL_PUPD_R1R0_TYPE,/*61*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*62*/ MTK_PULL_PUPD_R1R0_TYPE,/*63*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*64*/ MTK_PULL_PUPD_R1R0_TYPE,/*65*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*66*/ MTK_PULL_PUPD_R1R0_TYPE,/*67*/
-- MTK_PULL_PUPD_R1R0_TYPE,/*68*/ MTK_PULL_PU_PD_TYPE,/*69*/
-- MTK_PULL_PU_PD_TYPE,/*70*/ MTK_PULL_PU_PD_TYPE,/*71*/
-- MTK_PULL_PU_PD_TYPE,/*72*/ MTK_PULL_PU_PD_TYPE,/*73*/
-- MTK_PULL_PU_PD_TYPE,/*74*/ MTK_PULL_PU_PD_TYPE,/*75*/
-- MTK_PULL_PU_PD_TYPE,/*76*/ MTK_PULL_PU_PD_TYPE,/*77*/
-- MTK_PULL_PU_PD_TYPE,/*78*/ MTK_PULL_PU_PD_TYPE,/*79*/
-- MTK_PULL_PU_PD_TYPE,/*80*/ MTK_PULL_PU_PD_TYPE,/*81*/
-- MTK_PULL_PU_PD_TYPE,/*82*/ MTK_PULL_PU_PD_TYPE,/*83*/
-- MTK_PULL_PU_PD_TYPE,/*84*/ MTK_PULL_PU_PD_TYPE,/*85*/
-- MTK_PULL_PU_PD_TYPE,/*86*/ MTK_PULL_PU_PD_TYPE,/*87*/
-- MTK_PULL_PU_PD_TYPE,/*88*/ MTK_PULL_PU_PD_TYPE,/*89*/
-- MTK_PULL_PU_PD_TYPE,/*90*/ MTK_PULL_PU_PD_TYPE,/*91*/
-- MTK_PULL_PU_PD_TYPE,/*92*/ MTK_PULL_PU_PD_TYPE,/*93*/
-- MTK_PULL_PU_PD_TYPE,/*94*/ MTK_PULL_PU_PD_TYPE,/*95*/
-- MTK_PULL_PU_PD_TYPE,/*96*/ MTK_PULL_PU_PD_TYPE,/*97*/
-- MTK_PULL_PU_PD_TYPE,/*98*/ MTK_PULL_PU_PD_TYPE,/*99*/
-- MTK_PULL_PU_PD_TYPE,/*100*/
-+ MTK_PULL_PU_PD_TYPE,/*40*/ MTK_PULL_PU_PD_TYPE,/*41*/
-+ MTK_PULL_PU_PD_TYPE,/*42*/ MTK_PULL_PU_PD_TYPE,/*43*/
-+ MTK_PULL_PU_PD_TYPE,/*44*/ MTK_PULL_PU_PD_TYPE,/*45*/
-+ MTK_PULL_PU_PD_TYPE,/*46*/ MTK_PULL_PU_PD_TYPE,/*47*/
-+ MTK_PULL_PU_PD_TYPE,/*48*/ MTK_PULL_PU_PD_TYPE,/*49*/
-+ MTK_PULL_PU_PD_TYPE,/*50*/ MTK_PULL_PU_PD_TYPE,/*51*/
-+ MTK_PULL_PU_PD_TYPE,/*52*/ MTK_PULL_PU_PD_TYPE,/*53*/
-+ MTK_PULL_PU_PD_TYPE,/*54*/ MTK_PULL_PU_PD_TYPE,/*55*/
-+ MTK_PULL_PU_PD_TYPE,/*56*/
- };
-
- static const struct mtk_pin_reg_calc mt7981_reg_cals[] = {
-@@ -1014,6 +992,10 @@ static struct mtk_pin_soc mt7981_data =
- .ies_present = false,
- .base_names = mt7981_pinctrl_register_base_names,
- .nbase_names = ARRAY_SIZE(mt7981_pinctrl_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get,
-+ .bias_set = mtk_pinconf_bias_set,
-+ .bias_get = mtk_pinconf_bias_get,
- .pull_type = mt7981_pull_type,
- .bias_set_combo = mtk_pinconf_bias_set_combo,
- .bias_get_combo = mtk_pinconf_bias_get_combo,
+++ /dev/null
-From 0d8387fba9f151220e48dc3dcdc2335539708f13 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Fri, 18 Aug 2023 04:03:26 +0100
-Subject: [PATCH] pinctrl: mediatek: assign functions to configure pin bias on
- MT7986
-
-Assign bias_disable_get/set and bias_get/set functions to allow
-configuring pin bias on MT7986.
-
-Fixes: 2c58d8dc9cd0 ("pinctrl: mediatek: add pull_type attribute for mediatek MT7986 SoC")
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/47f72372354312a839b9337e09476aadcc206e8b.1692327317.git.daniel@makrotopia.org
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-mt7986.c | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
-@@ -922,6 +922,10 @@ static struct mtk_pin_soc mt7986a_data =
- .ies_present = false,
- .base_names = mt7986_pinctrl_register_base_names,
- .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get,
-+ .bias_set = mtk_pinconf_bias_set,
-+ .bias_get = mtk_pinconf_bias_get,
- .pull_type = mt7986_pull_type,
- .bias_set_combo = mtk_pinconf_bias_set_combo,
- .bias_get_combo = mtk_pinconf_bias_get_combo,
-@@ -944,6 +948,10 @@ static struct mtk_pin_soc mt7986b_data =
- .ies_present = false,
- .base_names = mt7986_pinctrl_register_base_names,
- .nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
-+ .bias_disable_set = mtk_pinconf_bias_disable_set,
-+ .bias_disable_get = mtk_pinconf_bias_disable_get,
-+ .bias_set = mtk_pinconf_bias_set,
-+ .bias_get = mtk_pinconf_bias_get,
- .pull_type = mt7986_pull_type,
- .bias_set_combo = mtk_pinconf_bias_set_combo,
- .bias_get_combo = mtk_pinconf_bias_get_combo,
+++ /dev/null
-From fe5c8d03f3de89ae058e365b783f8c1314f47490 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:33 +0100
-Subject: [PATCH 01/15] clk: mediatek: clk-gate: Propagate struct device with
- mtk_clk_register_gates()
-
-Commit e4c23e19aa2a ("clk: mediatek: Register clock gate with device")
-introduces a helper function for the sole purpose of propagating a
-struct device pointer to the clk API when registering the mtk-gate
-clocks to take advantage of Runtime PM when/where needed and where
-a power domain is defined in devicetree.
-
-Function mtk_clk_register_gates() then becomes a wrapper around the
-new mtk_clk_register_gates_with_dev() function that will simply pass
-NULL as struct device: this is essential when registering drivers
-with CLK_OF_DECLARE instead of as a platform device, as there will
-be no struct device to pass... but we can as well simply have only
-one function that always takes such pointer as a param and pass NULL
-when unavoidable.
-
-This commit removes the mtk_clk_register_gates() wrapper and renames
-mtk_clk_register_gates_with_dev() to the former and all of the calls
-to either of the two functions were fixed in all drivers in order to
-reflect this change; also, to improve consistency with other kernel
-functions, the pointer to struct device was moved as the first param.
-
-Since a lot of MediaTek clock drivers are actually registering as a
-platform device, but were still registering the mtk-gate clocks
-without passing any struct device to the clock framework, they've
-been changed to pass a valid one now, as to make all those platforms
-able to use runtime power management where available.
-
-While at it, some much needed indentation changes were also done.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-4-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: dropped parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-gate.c | 23 +++++++---------------
- drivers/clk/mediatek/clk-gate.h | 7 +------
- drivers/clk/mediatek/clk-mt2701-aud.c | 4 ++--
- drivers/clk/mediatek/clk-mt2701-eth.c | 4 ++--
- drivers/clk/mediatek/clk-mt2701-g3d.c | 2 +-
- drivers/clk/mediatek/clk-mt2701-hif.c | 4 ++--
- drivers/clk/mediatek/clk-mt2701-mm.c | 4 ++--
- drivers/clk/mediatek/clk-mt2701.c | 12 +++++------
- drivers/clk/mediatek/clk-mt2712-mm.c | 4 ++--
- drivers/clk/mediatek/clk-mt2712.c | 12 +++++------
- drivers/clk/mediatek/clk-mt7622-aud.c | 4 ++--
- drivers/clk/mediatek/clk-mt7622-eth.c | 8 ++++----
- drivers/clk/mediatek/clk-mt7622-hif.c | 8 ++++----
- drivers/clk/mediatek/clk-mt7622.c | 14 ++++++-------
- drivers/clk/mediatek/clk-mt7629-eth.c | 7 ++++---
- drivers/clk/mediatek/clk-mt7629-hif.c | 8 ++++----
- drivers/clk/mediatek/clk-mt7629.c | 10 +++++-----
- drivers/clk/mediatek/clk-mt7986-eth.c | 10 +++++-----
- drivers/clk/mediatek/clk-mt7986-infracfg.c | 4 ++--
- 19 files changed, 68 insertions(+), 81 deletions(-)
-
---- a/drivers/clk/mediatek/clk-gate.c
-+++ b/drivers/clk/mediatek/clk-gate.c
-@@ -152,12 +152,12 @@ const struct clk_ops mtk_clk_gate_ops_no
- };
- EXPORT_SYMBOL_GPL(mtk_clk_gate_ops_no_setclr_inv);
-
--static struct clk_hw *mtk_clk_register_gate(const char *name,
-+static struct clk_hw *mtk_clk_register_gate(struct device *dev, const char *name,
- const char *parent_name,
- struct regmap *regmap, int set_ofs,
- int clr_ofs, int sta_ofs, u8 bit,
- const struct clk_ops *ops,
-- unsigned long flags, struct device *dev)
-+ unsigned long flags)
- {
- struct mtk_clk_gate *cg;
- int ret;
-@@ -202,10 +202,9 @@ static void mtk_clk_unregister_gate(stru
- kfree(cg);
- }
-
--int mtk_clk_register_gates_with_dev(struct device_node *node,
-- const struct mtk_gate *clks, int num,
-- struct clk_hw_onecell_data *clk_data,
-- struct device *dev)
-+int mtk_clk_register_gates(struct device *dev, struct device_node *node,
-+ const struct mtk_gate *clks, int num,
-+ struct clk_hw_onecell_data *clk_data)
- {
- int i;
- struct clk_hw *hw;
-@@ -229,13 +228,13 @@ int mtk_clk_register_gates_with_dev(stru
- continue;
- }
-
-- hw = mtk_clk_register_gate(gate->name, gate->parent_name,
-+ hw = mtk_clk_register_gate(dev, gate->name, gate->parent_name,
- regmap,
- gate->regs->set_ofs,
- gate->regs->clr_ofs,
- gate->regs->sta_ofs,
- gate->shift, gate->ops,
-- gate->flags, dev);
-+ gate->flags);
-
- if (IS_ERR(hw)) {
- pr_err("Failed to register clk %s: %pe\n", gate->name,
-@@ -261,14 +260,6 @@ err:
-
- return PTR_ERR(hw);
- }
--EXPORT_SYMBOL_GPL(mtk_clk_register_gates_with_dev);
--
--int mtk_clk_register_gates(struct device_node *node,
-- const struct mtk_gate *clks, int num,
-- struct clk_hw_onecell_data *clk_data)
--{
-- return mtk_clk_register_gates_with_dev(node, clks, num, clk_data, NULL);
--}
- EXPORT_SYMBOL_GPL(mtk_clk_register_gates);
-
- void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
---- a/drivers/clk/mediatek/clk-gate.h
-+++ b/drivers/clk/mediatek/clk-gate.h
-@@ -50,15 +50,10 @@ struct mtk_gate {
- #define GATE_MTK(_id, _name, _parent, _regs, _shift, _ops) \
- GATE_MTK_FLAGS(_id, _name, _parent, _regs, _shift, _ops, 0)
-
--int mtk_clk_register_gates(struct device_node *node,
-+int mtk_clk_register_gates(struct device *dev, struct device_node *node,
- const struct mtk_gate *clks, int num,
- struct clk_hw_onecell_data *clk_data);
-
--int mtk_clk_register_gates_with_dev(struct device_node *node,
-- const struct mtk_gate *clks, int num,
-- struct clk_hw_onecell_data *clk_data,
-- struct device *dev);
--
- void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num,
- struct clk_hw_onecell_data *clk_data);
-
---- a/drivers/clk/mediatek/clk-mt2701-aud.c
-+++ b/drivers/clk/mediatek/clk-mt2701-aud.c
-@@ -127,8 +127,8 @@ static int clk_mt2701_aud_probe(struct p
-
- clk_data = mtk_alloc_clk_data(CLK_AUD_NR);
-
-- mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, audio_clks,
-+ ARRAY_SIZE(audio_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r) {
---- a/drivers/clk/mediatek/clk-mt2701-eth.c
-+++ b/drivers/clk/mediatek/clk-mt2701-eth.c
-@@ -51,8 +51,8 @@ static int clk_mt2701_eth_probe(struct p
-
- clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR);
-
-- mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-+ ARRAY_SIZE(eth_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
---- a/drivers/clk/mediatek/clk-mt2701-g3d.c
-+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
-@@ -45,7 +45,7 @@ static int clk_mt2701_g3dsys_init(struct
-
- clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR);
-
-- mtk_clk_register_gates(node, g3d_clks, ARRAY_SIZE(g3d_clks),
-+ mtk_clk_register_gates(&pdev->dev, node, g3d_clks, ARRAY_SIZE(g3d_clks),
- clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt2701-hif.c
-+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
-@@ -48,8 +48,8 @@ static int clk_mt2701_hif_probe(struct p
-
- clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR);
-
-- mtk_clk_register_gates(node, hif_clks, ARRAY_SIZE(hif_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, hif_clks,
-+ ARRAY_SIZE(hif_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r) {
---- a/drivers/clk/mediatek/clk-mt2701-mm.c
-+++ b/drivers/clk/mediatek/clk-mt2701-mm.c
-@@ -76,8 +76,8 @@ static int clk_mt2701_mm_probe(struct pl
-
- clk_data = mtk_alloc_clk_data(CLK_MM_NR);
-
-- mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, mm_clks,
-+ ARRAY_SIZE(mm_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -685,8 +685,8 @@ static int mtk_topckgen_init(struct plat
- mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
- base, &mt2701_clk_lock, clk_data);
-
-- mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, top_clks,
-+ ARRAY_SIZE(top_clks), clk_data);
-
- return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- }
-@@ -789,8 +789,8 @@ static int mtk_infrasys_init(struct plat
- }
- }
-
-- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-- infra_clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+ ARRAY_SIZE(infra_clks), infra_clk_data);
- mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
- infra_clk_data);
-
-@@ -902,8 +902,8 @@ static int mtk_pericfg_init(struct platf
- if (!clk_data)
- return -ENOMEM;
-
-- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+ ARRAY_SIZE(peri_clks), clk_data);
-
- mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base,
- &mt2701_clk_lock, clk_data);
---- a/drivers/clk/mediatek/clk-mt2712-mm.c
-+++ b/drivers/clk/mediatek/clk-mt2712-mm.c
-@@ -117,8 +117,8 @@ static int clk_mt2712_mm_probe(struct pl
-
- clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK);
-
-- mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, mm_clks,
-+ ARRAY_SIZE(mm_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-
---- a/drivers/clk/mediatek/clk-mt2712.c
-+++ b/drivers/clk/mediatek/clk-mt2712.c
-@@ -1324,8 +1324,8 @@ static int clk_mt2712_top_probe(struct p
- &mt2712_clk_lock, top_clk_data);
- mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), base,
- &mt2712_clk_lock, top_clk_data);
-- mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
-- top_clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, top_clks,
-+ ARRAY_SIZE(top_clks), top_clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, top_clk_data);
-
-@@ -1344,8 +1344,8 @@ static int clk_mt2712_infra_probe(struct
-
- clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
-
-- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+ ARRAY_SIZE(infra_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-
-@@ -1366,8 +1366,8 @@ static int clk_mt2712_peri_probe(struct
-
- clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
-
-- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+ ARRAY_SIZE(peri_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-
---- a/drivers/clk/mediatek/clk-mt7622-aud.c
-+++ b/drivers/clk/mediatek/clk-mt7622-aud.c
-@@ -114,8 +114,8 @@ static int clk_mt7622_audiosys_init(stru
-
- clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
-
-- mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, audio_clks,
-+ ARRAY_SIZE(audio_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r) {
---- a/drivers/clk/mediatek/clk-mt7622-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7622-eth.c
-@@ -69,8 +69,8 @@ static int clk_mt7622_ethsys_init(struct
-
- clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK);
-
-- mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-+ ARRAY_SIZE(eth_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
-@@ -91,8 +91,8 @@ static int clk_mt7622_sgmiisys_init(stru
-
- clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK);
-
-- mtk_clk_register_gates(node, sgmii_clks, ARRAY_SIZE(sgmii_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, sgmii_clks,
-+ ARRAY_SIZE(sgmii_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
---- a/drivers/clk/mediatek/clk-mt7622-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7622-hif.c
-@@ -80,8 +80,8 @@ static int clk_mt7622_ssusbsys_init(stru
-
- clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
-
-- mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
-+ ARRAY_SIZE(ssusb_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
-@@ -102,8 +102,8 @@ static int clk_mt7622_pciesys_init(struc
-
- clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
-
-- mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
-+ ARRAY_SIZE(pcie_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
---- a/drivers/clk/mediatek/clk-mt7622.c
-+++ b/drivers/clk/mediatek/clk-mt7622.c
-@@ -621,8 +621,8 @@ static int mtk_topckgen_init(struct plat
- mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
- base, &mt7622_clk_lock, clk_data);
-
-- mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, top_clks,
-+ ARRAY_SIZE(top_clks), clk_data);
-
- return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- }
-@@ -635,8 +635,8 @@ static int mtk_infrasys_init(struct plat
-
- clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
-
-- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+ ARRAY_SIZE(infra_clks), clk_data);
-
- mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
- clk_data);
-@@ -663,7 +663,7 @@ static int mtk_apmixedsys_init(struct pl
- mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls),
- clk_data);
-
-- mtk_clk_register_gates(node, apmixed_clks,
-+ mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
- ARRAY_SIZE(apmixed_clks), clk_data);
-
- return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-@@ -682,8 +682,8 @@ static int mtk_pericfg_init(struct platf
-
- clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
-
-- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+ ARRAY_SIZE(peri_clks), clk_data);
-
- mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
- &mt7622_clk_lock, clk_data);
---- a/drivers/clk/mediatek/clk-mt7629-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7629-eth.c
-@@ -82,7 +82,8 @@ static int clk_mt7629_ethsys_init(struct
- if (!clk_data)
- return -ENOMEM;
-
-- mtk_clk_register_gates(node, eth_clks, CLK_ETH_NR_CLK, clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-+ CLK_ETH_NR_CLK, clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
-@@ -106,8 +107,8 @@ static int clk_mt7629_sgmiisys_init(stru
- if (!clk_data)
- return -ENOMEM;
-
-- mtk_clk_register_gates(node, sgmii_clks[id++], CLK_SGMII_NR_CLK,
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, sgmii_clks[id++],
-+ CLK_SGMII_NR_CLK, clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
---- a/drivers/clk/mediatek/clk-mt7629-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7629-hif.c
-@@ -75,8 +75,8 @@ static int clk_mt7629_ssusbsys_init(stru
-
- clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
-
-- mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
-+ ARRAY_SIZE(ssusb_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
-@@ -97,8 +97,8 @@ static int clk_mt7629_pciesys_init(struc
-
- clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
-
-- mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
-+ ARRAY_SIZE(pcie_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
---- a/drivers/clk/mediatek/clk-mt7629.c
-+++ b/drivers/clk/mediatek/clk-mt7629.c
-@@ -585,8 +585,8 @@ static int mtk_infrasys_init(struct plat
- if (!clk_data)
- return -ENOMEM;
-
-- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+ ARRAY_SIZE(infra_clks), clk_data);
-
- mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
- clk_data);
-@@ -610,8 +610,8 @@ static int mtk_pericfg_init(struct platf
- if (!clk_data)
- return -ENOMEM;
-
-- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-+ ARRAY_SIZE(peri_clks), clk_data);
-
- mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
- &mt7629_clk_lock, clk_data);
-@@ -637,7 +637,7 @@ static int mtk_apmixedsys_init(struct pl
- mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls),
- clk_data);
-
-- mtk_clk_register_gates(node, apmixed_clks,
-+ mtk_clk_register_gates(&pdev->dev, node, apmixed_clks,
- ARRAY_SIZE(apmixed_clks), clk_data);
-
- clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk);
---- a/drivers/clk/mediatek/clk-mt7986-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7986-eth.c
-@@ -72,8 +72,8 @@ static void __init mtk_sgmiisys_0_init(s
-
- clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii0_clks));
-
-- mtk_clk_register_gates(node, sgmii0_clks, ARRAY_SIZE(sgmii0_clks),
-- clk_data);
-+ mtk_clk_register_gates(NULL, node, sgmii0_clks,
-+ ARRAY_SIZE(sgmii0_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
-@@ -90,8 +90,8 @@ static void __init mtk_sgmiisys_1_init(s
-
- clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii1_clks));
-
-- mtk_clk_register_gates(node, sgmii1_clks, ARRAY_SIZE(sgmii1_clks),
-- clk_data);
-+ mtk_clk_register_gates(NULL, node, sgmii1_clks,
-+ ARRAY_SIZE(sgmii1_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-
-@@ -109,7 +109,7 @@ static void __init mtk_ethsys_init(struc
-
- clk_data = mtk_alloc_clk_data(ARRAY_SIZE(eth_clks));
-
-- mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), clk_data);
-+ mtk_clk_register_gates(NULL, node, eth_clks, ARRAY_SIZE(eth_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-
---- a/drivers/clk/mediatek/clk-mt7986-infracfg.c
-+++ b/drivers/clk/mediatek/clk-mt7986-infracfg.c
-@@ -180,8 +180,8 @@ static int clk_mt7986_infracfg_probe(str
- mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
- mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node,
- &mt7986_clk_lock, clk_data);
-- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
-- clk_data);
-+ mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-+ ARRAY_SIZE(infra_clks), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r) {
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -459,8 +459,8 @@ int mtk_clk_simple_probe(struct platform
- if (!clk_data)
- return -ENOMEM;
-
-- r = mtk_clk_register_gates_with_dev(node, mcd->clks, mcd->num_clks,
-- clk_data, &pdev->dev);
-+ r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks, mcd->num_clks,
-+ clk_data);
- if (r)
- goto free_data;
-
+++ /dev/null
-From b888303c7d23d7bd0c8667cfc657669e5d153fea Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:34 +0100
-Subject: [PATCH 02/15] clk: mediatek: cpumux: Propagate struct device where
- possible
-
-Take a pointer to a struct device in mtk_clk_register_cpumuxes() and
-propagate the same to mtk_clk_register_cpumux() => clk_hw_register().
-Even though runtime pm is unlikely to be used with CPU muxes, this
-helps with code consistency and possibly opens to commonization of
-some mtk_clk_register_(x) functions.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-5-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-cpumux.c | 8 ++++----
- drivers/clk/mediatek/clk-cpumux.h | 2 +-
- drivers/clk/mediatek/clk-mt2701.c | 2 +-
- drivers/clk/mediatek/clk-mt6795-infracfg.c | 3 ++-
- drivers/clk/mediatek/clk-mt7622.c | 4 ++--
- drivers/clk/mediatek/clk-mt7629.c | 4 ++--
- drivers/clk/mediatek/clk-mt8173.c | 4 ++--
- 7 files changed, 14 insertions(+), 13 deletions(-)
-
---- a/drivers/clk/mediatek/clk-cpumux.c
-+++ b/drivers/clk/mediatek/clk-cpumux.c
-@@ -58,7 +58,7 @@ static const struct clk_ops clk_cpumux_o
- };
-
- static struct clk_hw *
--mtk_clk_register_cpumux(const struct mtk_composite *mux,
-+mtk_clk_register_cpumux(struct device *dev, const struct mtk_composite *mux,
- struct regmap *regmap)
- {
- struct mtk_clk_cpumux *cpumux;
-@@ -81,7 +81,7 @@ mtk_clk_register_cpumux(const struct mtk
- cpumux->regmap = regmap;
- cpumux->hw.init = &init;
-
-- ret = clk_hw_register(NULL, &cpumux->hw);
-+ ret = clk_hw_register(dev, &cpumux->hw);
- if (ret) {
- kfree(cpumux);
- return ERR_PTR(ret);
-@@ -102,7 +102,7 @@ static void mtk_clk_unregister_cpumux(st
- kfree(cpumux);
- }
-
--int mtk_clk_register_cpumuxes(struct device_node *node,
-+int mtk_clk_register_cpumuxes(struct device *dev, struct device_node *node,
- const struct mtk_composite *clks, int num,
- struct clk_hw_onecell_data *clk_data)
- {
-@@ -125,7 +125,7 @@ int mtk_clk_register_cpumuxes(struct dev
- continue;
- }
-
-- hw = mtk_clk_register_cpumux(mux, regmap);
-+ hw = mtk_clk_register_cpumux(dev, mux, regmap);
- if (IS_ERR(hw)) {
- pr_err("Failed to register clk %s: %pe\n", mux->name,
- hw);
---- a/drivers/clk/mediatek/clk-cpumux.h
-+++ b/drivers/clk/mediatek/clk-cpumux.h
-@@ -11,7 +11,7 @@ struct clk_hw_onecell_data;
- struct device_node;
- struct mtk_composite;
-
--int mtk_clk_register_cpumuxes(struct device_node *node,
-+int mtk_clk_register_cpumuxes(struct device *dev, struct device_node *node,
- const struct mtk_composite *clks, int num,
- struct clk_hw_onecell_data *clk_data);
-
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -761,7 +761,7 @@ static void __init mtk_infrasys_init_ear
- mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
- infra_clk_data);
-
-- mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
-+ mtk_clk_register_cpumuxes(NULL, node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
- infra_clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
---- a/drivers/clk/mediatek/clk-mt6795-infracfg.c
-+++ b/drivers/clk/mediatek/clk-mt6795-infracfg.c
-@@ -105,7 +105,8 @@ static int clk_mt6795_infracfg_probe(str
- if (ret)
- goto free_clk_data;
-
-- ret = mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes), clk_data);
-+ ret = mtk_clk_register_cpumuxes(&pdev->dev, node, cpu_muxes,
-+ ARRAY_SIZE(cpu_muxes), clk_data);
- if (ret)
- goto unregister_gates;
-
---- a/drivers/clk/mediatek/clk-mt7622.c
-+++ b/drivers/clk/mediatek/clk-mt7622.c
-@@ -638,8 +638,8 @@ static int mtk_infrasys_init(struct plat
- mtk_clk_register_gates(&pdev->dev, node, infra_clks,
- ARRAY_SIZE(infra_clks), clk_data);
-
-- mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
-- clk_data);
-+ mtk_clk_register_cpumuxes(&pdev->dev, node, infra_muxes,
-+ ARRAY_SIZE(infra_muxes), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
- clk_data);
---- a/drivers/clk/mediatek/clk-mt7629.c
-+++ b/drivers/clk/mediatek/clk-mt7629.c
-@@ -588,8 +588,8 @@ static int mtk_infrasys_init(struct plat
- mtk_clk_register_gates(&pdev->dev, node, infra_clks,
- ARRAY_SIZE(infra_clks), clk_data);
-
-- mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes),
-- clk_data);
-+ mtk_clk_register_cpumuxes(&pdev->dev, node, infra_muxes,
-+ ARRAY_SIZE(infra_muxes), clk_data);
-
- return of_clk_add_hw_provider(node, of_clk_hw_onecell_get,
- clk_data);
---- a/drivers/clk/mediatek/clk-mt8173.c
-+++ b/drivers/clk/mediatek/clk-mt8173.c
-@@ -892,8 +892,8 @@ static void __init mtk_infrasys_init(str
- clk_data);
- mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
-
-- mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes),
-- clk_data);
-+ mtk_clk_register_cpumuxes(NULL, node, cpu_muxes,
-+ ARRAY_SIZE(cpu_muxes), clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
+++ /dev/null
-From f23375db001ec0fe9f565be75eff43adde15407e Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:35 +0100
-Subject: [PATCH 03/15] clk: mediatek: clk-mtk: Propagate struct device for
- composites
-
-Like done for cpumux clocks, propagate struct device for composite
-clocks registered through clk-mtk helpers to be able to get runtime
-pm support for MTK clocks.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-6-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: remove parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-mt2701.c | 10 ++++++----
- drivers/clk/mediatek/clk-mt2712.c | 12 ++++++++----
- drivers/clk/mediatek/clk-mt7622.c | 8 +++++---
- drivers/clk/mediatek/clk-mt7629.c | 8 +++++---
- drivers/clk/mediatek/clk-mtk.c | 11 ++++++-----
- drivers/clk/mediatek/clk-mtk.h | 3 ++-
- 6 files changed, 32 insertions(+), 20 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt2701.c
-+++ b/drivers/clk/mediatek/clk-mt2701.c
-@@ -679,8 +679,9 @@ static int mtk_topckgen_init(struct plat
- mtk_clk_register_factors(top_fixed_divs, ARRAY_SIZE(top_fixed_divs),
- clk_data);
-
-- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
-- base, &mt2701_clk_lock, clk_data);
-+ mtk_clk_register_composites(&pdev->dev, top_muxes,
-+ ARRAY_SIZE(top_muxes), base,
-+ &mt2701_clk_lock, clk_data);
-
- mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
- base, &mt2701_clk_lock, clk_data);
-@@ -905,8 +906,9 @@ static int mtk_pericfg_init(struct platf
- mtk_clk_register_gates(&pdev->dev, node, peri_clks,
- ARRAY_SIZE(peri_clks), clk_data);
-
-- mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base,
-- &mt2701_clk_lock, clk_data);
-+ mtk_clk_register_composites(&pdev->dev, peri_muxs,
-+ ARRAY_SIZE(peri_muxs), base,
-+ &mt2701_clk_lock, clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
---- a/drivers/clk/mediatek/clk-mt2712.c
-+++ b/drivers/clk/mediatek/clk-mt2712.c
-@@ -1320,8 +1320,9 @@ static int clk_mt2712_top_probe(struct p
- mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs),
- top_clk_data);
- mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), top_clk_data);
-- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base,
-- &mt2712_clk_lock, top_clk_data);
-+ mtk_clk_register_composites(&pdev->dev, top_muxes,
-+ ARRAY_SIZE(top_muxes), base,
-+ &mt2712_clk_lock, top_clk_data);
- mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), base,
- &mt2712_clk_lock, top_clk_data);
- mtk_clk_register_gates(&pdev->dev, node, top_clks,
-@@ -1395,8 +1396,11 @@ static int clk_mt2712_mcu_probe(struct p
-
- clk_data = mtk_alloc_clk_data(CLK_MCU_NR_CLK);
-
-- mtk_clk_register_composites(mcu_muxes, ARRAY_SIZE(mcu_muxes), base,
-- &mt2712_clk_lock, clk_data);
-+ r = mtk_clk_register_composites(&pdev->dev, mcu_muxes,
-+ ARRAY_SIZE(mcu_muxes), base,
-+ &mt2712_clk_lock, clk_data);
-+ if (r)
-+ dev_err(&pdev->dev, "Could not register composites: %d\n", r);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-
---- a/drivers/clk/mediatek/clk-mt7622.c
-+++ b/drivers/clk/mediatek/clk-mt7622.c
-@@ -615,8 +615,9 @@ static int mtk_topckgen_init(struct plat
- mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs),
- clk_data);
-
-- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
-- base, &mt7622_clk_lock, clk_data);
-+ mtk_clk_register_composites(&pdev->dev, top_muxes,
-+ ARRAY_SIZE(top_muxes), base,
-+ &mt7622_clk_lock, clk_data);
-
- mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs),
- base, &mt7622_clk_lock, clk_data);
-@@ -685,7 +686,8 @@ static int mtk_pericfg_init(struct platf
- mtk_clk_register_gates(&pdev->dev, node, peri_clks,
- ARRAY_SIZE(peri_clks), clk_data);
-
-- mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-+ mtk_clk_register_composites(&pdev->dev, peri_muxes,
-+ ARRAY_SIZE(peri_muxes), base,
- &mt7622_clk_lock, clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mt7629.c
-+++ b/drivers/clk/mediatek/clk-mt7629.c
-@@ -566,8 +566,9 @@ static int mtk_topckgen_init(struct plat
- mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs),
- clk_data);
-
-- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes),
-- base, &mt7629_clk_lock, clk_data);
-+ mtk_clk_register_composites(&pdev->dev, top_muxes,
-+ ARRAY_SIZE(top_muxes), base,
-+ &mt7629_clk_lock, clk_data);
-
- clk_prepare_enable(clk_data->hws[CLK_TOP_AXI_SEL]->clk);
- clk_prepare_enable(clk_data->hws[CLK_TOP_MEM_SEL]->clk);
-@@ -613,7 +614,8 @@ static int mtk_pericfg_init(struct platf
- mtk_clk_register_gates(&pdev->dev, node, peri_clks,
- ARRAY_SIZE(peri_clks), clk_data);
-
-- mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base,
-+ mtk_clk_register_composites(&pdev->dev, peri_muxes,
-+ ARRAY_SIZE(peri_muxes), base,
- &mt7629_clk_lock, clk_data);
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -197,8 +197,8 @@ void mtk_clk_unregister_factors(const st
- }
- EXPORT_SYMBOL_GPL(mtk_clk_unregister_factors);
-
--static struct clk_hw *mtk_clk_register_composite(const struct mtk_composite *mc,
-- void __iomem *base, spinlock_t *lock)
-+static struct clk_hw *mtk_clk_register_composite(struct device *dev,
-+ const struct mtk_composite *mc, void __iomem *base, spinlock_t *lock)
- {
- struct clk_hw *hw;
- struct clk_mux *mux = NULL;
-@@ -264,7 +264,7 @@ static struct clk_hw *mtk_clk_register_c
- div_ops = &clk_divider_ops;
- }
-
-- hw = clk_hw_register_composite(NULL, mc->name, parent_names, num_parents,
-+ hw = clk_hw_register_composite(dev, mc->name, parent_names, num_parents,
- mux_hw, mux_ops,
- div_hw, div_ops,
- gate_hw, gate_ops,
-@@ -308,7 +308,8 @@ static void mtk_clk_unregister_composite
- kfree(mux);
- }
-
--int mtk_clk_register_composites(const struct mtk_composite *mcs, int num,
-+int mtk_clk_register_composites(struct device *dev,
-+ const struct mtk_composite *mcs, int num,
- void __iomem *base, spinlock_t *lock,
- struct clk_hw_onecell_data *clk_data)
- {
-@@ -327,7 +328,7 @@ int mtk_clk_register_composites(const st
- continue;
- }
-
-- hw = mtk_clk_register_composite(mc, base, lock);
-+ hw = mtk_clk_register_composite(dev, mc, base, lock);
-
- if (IS_ERR(hw)) {
- pr_err("Failed to register clk %s: %pe\n", mc->name,
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -149,7 +149,8 @@ struct mtk_composite {
- .flags = 0, \
- }
-
--int mtk_clk_register_composites(const struct mtk_composite *mcs, int num,
-+int mtk_clk_register_composites(struct device *dev,
-+ const struct mtk_composite *mcs, int num,
- void __iomem *base, spinlock_t *lock,
- struct clk_hw_onecell_data *clk_data);
- void mtk_clk_unregister_composites(const struct mtk_composite *mcs, int num,
+++ /dev/null
-From 5d911479e4c732729bfa798e4a9e3e5aec3e30a7 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:36 +0100
-Subject: [PATCH 04/15] clk: mediatek: clk-mux: Propagate struct device for
- mtk-mux
-
-Like done for other clocks, propagate struct device for mtk mux clocks
-registered through clk-mux helpers to enable runtime pm support.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-7-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: removed parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-mt7986-infracfg.c | 3 ++-
- drivers/clk/mediatek/clk-mt7986-topckgen.c | 3 ++-
- drivers/clk/mediatek/clk-mux.c | 14 ++++++++------
- drivers/clk/mediatek/clk-mux.h | 3 ++-
- 4 files changed, 14 insertions(+), 9 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-infracfg.c
-+++ b/drivers/clk/mediatek/clk-mt7986-infracfg.c
-@@ -178,7 +178,8 @@ static int clk_mt7986_infracfg_probe(str
- return -ENOMEM;
-
- mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
-- mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node,
-+ mtk_clk_register_muxes(&pdev->dev, infra_muxes,
-+ ARRAY_SIZE(infra_muxes), node,
- &mt7986_clk_lock, clk_data);
- mtk_clk_register_gates(&pdev->dev, node, infra_clks,
- ARRAY_SIZE(infra_clks), clk_data);
---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c
-+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c
-@@ -303,7 +303,8 @@ static int clk_mt7986_topckgen_probe(str
- mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
- clk_data);
- mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
-- mtk_clk_register_muxes(top_muxes, ARRAY_SIZE(top_muxes), node,
-+ mtk_clk_register_muxes(&pdev->dev, top_muxes,
-+ ARRAY_SIZE(top_muxes), node,
- &mt7986_clk_lock, clk_data);
-
- clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAXI_SEL]->clk);
---- a/drivers/clk/mediatek/clk-mux.c
-+++ b/drivers/clk/mediatek/clk-mux.c
-@@ -154,9 +154,10 @@ const struct clk_ops mtk_mux_gate_clr_se
- };
- EXPORT_SYMBOL_GPL(mtk_mux_gate_clr_set_upd_ops);
-
--static struct clk_hw *mtk_clk_register_mux(const struct mtk_mux *mux,
-- struct regmap *regmap,
-- spinlock_t *lock)
-+static struct clk_hw *mtk_clk_register_mux(struct device *dev,
-+ const struct mtk_mux *mux,
-+ struct regmap *regmap,
-+ spinlock_t *lock)
- {
- struct mtk_clk_mux *clk_mux;
- struct clk_init_data init = {};
-@@ -177,7 +178,7 @@ static struct clk_hw *mtk_clk_register_m
- clk_mux->lock = lock;
- clk_mux->hw.init = &init;
-
-- ret = clk_hw_register(NULL, &clk_mux->hw);
-+ ret = clk_hw_register(dev, &clk_mux->hw);
- if (ret) {
- kfree(clk_mux);
- return ERR_PTR(ret);
-@@ -198,7 +199,8 @@ static void mtk_clk_unregister_mux(struc
- kfree(mux);
- }
-
--int mtk_clk_register_muxes(const struct mtk_mux *muxes,
-+int mtk_clk_register_muxes(struct device *dev,
-+ const struct mtk_mux *muxes,
- int num, struct device_node *node,
- spinlock_t *lock,
- struct clk_hw_onecell_data *clk_data)
-@@ -222,7 +224,7 @@ int mtk_clk_register_muxes(const struct
- continue;
- }
-
-- hw = mtk_clk_register_mux(mux, regmap, lock);
-+ hw = mtk_clk_register_mux(dev, mux, regmap, lock);
-
- if (IS_ERR(hw)) {
- pr_err("Failed to register clk %s: %pe\n", mux->name,
---- a/drivers/clk/mediatek/clk-mux.h
-+++ b/drivers/clk/mediatek/clk-mux.h
-@@ -83,7 +83,8 @@ extern const struct clk_ops mtk_mux_gate
- 0, _upd_ofs, _upd, CLK_SET_RATE_PARENT, \
- mtk_mux_clr_set_upd_ops)
-
--int mtk_clk_register_muxes(const struct mtk_mux *muxes,
-+int mtk_clk_register_muxes(struct device *dev,
-+ const struct mtk_mux *muxes,
- int num, struct device_node *node,
- spinlock_t *lock,
- struct clk_hw_onecell_data *clk_data);
+++ /dev/null
-From b8eb1081d267708ba976525a1fe2162901b34f3a Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:37 +0100
-Subject: [PATCH] clk: mediatek: clk-mtk: Add dummy clock ops
-
-In order to migrate some (few) old clock drivers to the common
-mtk_clk_simple_probe() function, add dummy clock ops to be able
-to insert a dummy clock with ID 0 at the beginning of the list.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-8-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mtk.c | 16 ++++++++++++++++
- drivers/clk/mediatek/clk-mtk.h | 19 +++++++++++++++++++
- 2 files changed, 35 insertions(+)
-
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -18,6 +18,22 @@
- #include "clk-mtk.h"
- #include "clk-gate.h"
-
-+const struct mtk_gate_regs cg_regs_dummy = { 0, 0, 0 };
-+EXPORT_SYMBOL_GPL(cg_regs_dummy);
-+
-+static int mtk_clk_dummy_enable(struct clk_hw *hw)
-+{
-+ return 0;
-+}
-+
-+static void mtk_clk_dummy_disable(struct clk_hw *hw) { }
-+
-+const struct clk_ops mtk_clk_dummy_ops = {
-+ .enable = mtk_clk_dummy_enable,
-+ .disable = mtk_clk_dummy_disable,
-+};
-+EXPORT_SYMBOL_GPL(mtk_clk_dummy_ops);
-+
- static void mtk_init_clk_data(struct clk_hw_onecell_data *clk_data,
- unsigned int clk_num)
- {
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -22,6 +22,25 @@
-
- struct platform_device;
-
-+/*
-+ * We need the clock IDs to start from zero but to maintain devicetree
-+ * backwards compatibility we can't change bindings to start from zero.
-+ * Only a few platforms are affected, so we solve issues given by the
-+ * commonized MTK clocks probe function(s) by adding a dummy clock at
-+ * the beginning where needed.
-+ */
-+#define CLK_DUMMY 0
-+
-+extern const struct clk_ops mtk_clk_dummy_ops;
-+extern const struct mtk_gate_regs cg_regs_dummy;
-+
-+#define GATE_DUMMY(_id, _name) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .regs = &cg_regs_dummy, \
-+ .ops = &mtk_clk_dummy_ops, \
-+ }
-+
- struct mtk_fixed_clk {
- int id;
- const char *name;
+++ /dev/null
-From c26e28015b74af73e0b299f6ad3ff22931e600b4 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:41 +0100
-Subject: [PATCH 05/15] clk: mediatek: Switch to mtk_clk_simple_probe() where
- possible
-
-mtk_clk_simple_probe() is a function that registers mtk gate clocks
-and, if reset data is present, a reset controller and across all of
-the MTK clock drivers, such a function is duplicated many times:
-switch to the common mtk_clk_simple_probe() function for all of the
-clock drivers that are registering as platform drivers.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-12-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-
-[daniel@makrotopia.org: removed parts not relevant for OpenWrt]
----
- drivers/clk/mediatek/clk-mt2701-aud.c | 31 ++++++----
- drivers/clk/mediatek/clk-mt2701-eth.c | 36 ++++--------
- drivers/clk/mediatek/clk-mt2701-g3d.c | 56 ++++--------------
- drivers/clk/mediatek/clk-mt2701-hif.c | 38 ++++--------
- drivers/clk/mediatek/clk-mt2712.c | 83 ++++++++++----------------
- drivers/clk/mediatek/clk-mt7622-aud.c | 54 ++++++-----------
- drivers/clk/mediatek/clk-mt7622-eth.c | 82 +++++---------------------
- drivers/clk/mediatek/clk-mt7622-hif.c | 85 +++++----------------------
- drivers/clk/mediatek/clk-mt7629-hif.c | 85 +++++----------------------
- 9 files changed, 144 insertions(+), 406 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt2701-aud.c
-+++ b/drivers/clk/mediatek/clk-mt2701-aud.c
-@@ -52,6 +52,7 @@ static const struct mtk_gate_regs audio3
- };
-
- static const struct mtk_gate audio_clks[] = {
-+ GATE_DUMMY(CLK_DUMMY, "aud_dummy"),
- /* AUDIO0 */
- GATE_AUDIO0(CLK_AUD_AFE, "audio_afe", "aud_intbus_sel", 2),
- GATE_AUDIO0(CLK_AUD_HDMI, "audio_hdmi", "audpll_sel", 20),
-@@ -114,29 +115,27 @@ static const struct mtk_gate audio_clks[
- GATE_AUDIO3(CLK_AUD_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14),
- };
-
-+static const struct mtk_clk_desc audio_desc = {
-+ .clks = audio_clks,
-+ .num_clks = ARRAY_SIZE(audio_clks),
-+};
-+
- static const struct of_device_id of_match_clk_mt2701_aud[] = {
-- { .compatible = "mediatek,mt2701-audsys", },
-- {}
-+ { .compatible = "mediatek,mt2701-audsys", .data = &audio_desc },
-+ { /* sentinel */ }
- };
-
- static int clk_mt2701_aud_probe(struct platform_device *pdev)
- {
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
- int r;
-
-- clk_data = mtk_alloc_clk_data(CLK_AUD_NR);
--
-- mtk_clk_register_gates(&pdev->dev, node, audio_clks,
-- ARRAY_SIZE(audio_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-+ r = mtk_clk_simple_probe(pdev);
- if (r) {
- dev_err(&pdev->dev,
- "could not register clock provider: %s: %d\n",
- pdev->name, r);
-
-- goto err_clk_provider;
-+ return r;
- }
-
- r = devm_of_platform_populate(&pdev->dev);
-@@ -146,13 +145,19 @@ static int clk_mt2701_aud_probe(struct p
- return 0;
-
- err_plat_populate:
-- of_clk_del_provider(node);
--err_clk_provider:
-+ mtk_clk_simple_remove(pdev);
- return r;
- }
-
-+static int clk_mt2701_aud_remove(struct platform_device *pdev)
-+{
-+ of_platform_depopulate(&pdev->dev);
-+ return mtk_clk_simple_remove(pdev);
-+}
-+
- static struct platform_driver clk_mt2701_aud_drv = {
- .probe = clk_mt2701_aud_probe,
-+ .remove = clk_mt2701_aud_remove,
- .driver = {
- .name = "clk-mt2701-aud",
- .of_match_table = of_match_clk_mt2701_aud,
---- a/drivers/clk/mediatek/clk-mt2701-eth.c
-+++ b/drivers/clk/mediatek/clk-mt2701-eth.c
-@@ -20,6 +20,7 @@ static const struct mtk_gate_regs eth_cg
- GATE_MTK(_id, _name, _parent, ð_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
-
- static const struct mtk_gate eth_clks[] = {
-+ GATE_DUMMY(CLK_DUMMY, "eth_dummy"),
- GATE_ETH(CLK_ETHSYS_HSDMA, "hsdma_clk", "ethif_sel", 5),
- GATE_ETH(CLK_ETHSYS_ESW, "esw_clk", "ethpll_500m_ck", 6),
- GATE_ETH(CLK_ETHSYS_GP2, "gp2_clk", "trgpll", 7),
-@@ -38,35 +39,20 @@ static const struct mtk_clk_rst_desc clk
- .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
-
--static const struct of_device_id of_match_clk_mt2701_eth[] = {
-- { .compatible = "mediatek,mt2701-ethsys", },
-- {}
-+static const struct mtk_clk_desc eth_desc = {
-+ .clks = eth_clks,
-+ .num_clks = ARRAY_SIZE(eth_clks),
-+ .rst_desc = &clk_rst_desc,
- };
-
--static int clk_mt2701_eth_probe(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- int r;
-- struct device_node *node = pdev->dev.of_node;
--
-- clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR);
--
-- mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-- ARRAY_SIZE(eth_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
-- return r;
--}
-+static const struct of_device_id of_match_clk_mt2701_eth[] = {
-+ { .compatible = "mediatek,mt2701-ethsys", .data = ð_desc },
-+ { /* sentinel */ }
-+};
-
- static struct platform_driver clk_mt2701_eth_drv = {
-- .probe = clk_mt2701_eth_probe,
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
- .driver = {
- .name = "clk-mt2701-eth",
- .of_match_table = of_match_clk_mt2701_eth,
---- a/drivers/clk/mediatek/clk-mt2701-g3d.c
-+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c
-@@ -26,6 +26,7 @@ static const struct mtk_gate_regs g3d_cg
- };
-
- static const struct mtk_gate g3d_clks[] = {
-+ GATE_DUMMY(CLK_DUMMY, "g3d_dummy"),
- GATE_G3D(CLK_G3DSYS_CORE, "g3d_core", "mfg_sel", 0),
- };
-
-@@ -37,57 +38,20 @@ static const struct mtk_clk_rst_desc clk
- .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
-
--static int clk_mt2701_g3dsys_init(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
--
-- clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR);
--
-- mtk_clk_register_gates(&pdev->dev, node, g3d_clks, ARRAY_SIZE(g3d_clks),
-- clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
-- return r;
--}
-+static const struct mtk_clk_desc g3d_desc = {
-+ .clks = g3d_clks,
-+ .num_clks = ARRAY_SIZE(g3d_clks),
-+ .rst_desc = &clk_rst_desc,
-+};
-
- static const struct of_device_id of_match_clk_mt2701_g3d[] = {
-- {
-- .compatible = "mediatek,mt2701-g3dsys",
-- .data = clk_mt2701_g3dsys_init,
-- }, {
-- /* sentinel */
-- }
-+ { .compatible = "mediatek,mt2701-g3dsys", .data = &g3d_desc },
-+ { /* sentinel */ }
- };
-
--static int clk_mt2701_g3d_probe(struct platform_device *pdev)
--{
-- int (*clk_init)(struct platform_device *);
-- int r;
--
-- clk_init = of_device_get_match_data(&pdev->dev);
-- if (!clk_init)
-- return -EINVAL;
--
-- r = clk_init(pdev);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- return r;
--}
--
- static struct platform_driver clk_mt2701_g3d_drv = {
-- .probe = clk_mt2701_g3d_probe,
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
- .driver = {
- .name = "clk-mt2701-g3d",
- .of_match_table = of_match_clk_mt2701_g3d,
---- a/drivers/clk/mediatek/clk-mt2701-hif.c
-+++ b/drivers/clk/mediatek/clk-mt2701-hif.c
-@@ -20,6 +20,7 @@ static const struct mtk_gate_regs hif_cg
- GATE_MTK(_id, _name, _parent, &hif_cg_regs, _shift, &mtk_clk_gate_ops_no_setclr_inv)
-
- static const struct mtk_gate hif_clks[] = {
-+ GATE_DUMMY(CLK_DUMMY, "hif_dummy"),
- GATE_HIF(CLK_HIFSYS_USB0PHY, "usb0_phy_clk", "ethpll_500m_ck", 21),
- GATE_HIF(CLK_HIFSYS_USB1PHY, "usb1_phy_clk", "ethpll_500m_ck", 22),
- GATE_HIF(CLK_HIFSYS_PCIE0, "pcie0_clk", "ethpll_500m_ck", 24),
-@@ -35,37 +36,20 @@ static const struct mtk_clk_rst_desc clk
- .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
-
--static const struct of_device_id of_match_clk_mt2701_hif[] = {
-- { .compatible = "mediatek,mt2701-hifsys", },
-- {}
-+static const struct mtk_clk_desc hif_desc = {
-+ .clks = hif_clks,
-+ .num_clks = ARRAY_SIZE(hif_clks),
-+ .rst_desc = &clk_rst_desc,
- };
-
--static int clk_mt2701_hif_probe(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- int r;
-- struct device_node *node = pdev->dev.of_node;
--
-- clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR);
--
-- mtk_clk_register_gates(&pdev->dev, node, hif_clks,
-- ARRAY_SIZE(hif_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r) {
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
-- return r;
-- }
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
-- return 0;
--}
-+static const struct of_device_id of_match_clk_mt2701_hif[] = {
-+ { .compatible = "mediatek,mt2701-hifsys", .data = &hif_desc },
-+ { /* sentinel */ }
-+};
-
- static struct platform_driver clk_mt2701_hif_drv = {
-- .probe = clk_mt2701_hif_probe,
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
- .driver = {
- .name = "clk-mt2701-hif",
- .of_match_table = of_match_clk_mt2701_hif,
---- a/drivers/clk/mediatek/clk-mt2712.c
-+++ b/drivers/clk/mediatek/clk-mt2712.c
-@@ -1337,50 +1337,6 @@ static int clk_mt2712_top_probe(struct p
- return r;
- }
-
--static int clk_mt2712_infra_probe(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- int r;
-- struct device_node *node = pdev->dev.of_node;
--
-- clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, infra_clks,
-- ARRAY_SIZE(infra_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--
-- if (r != 0)
-- pr_err("%s(): could not register clock provider: %d\n",
-- __func__, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc[0]);
--
-- return r;
--}
--
--static int clk_mt2712_peri_probe(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- int r;
-- struct device_node *node = pdev->dev.of_node;
--
-- clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, peri_clks,
-- ARRAY_SIZE(peri_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--
-- if (r != 0)
-- pr_err("%s(): could not register clock provider: %d\n",
-- __func__, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc[1]);
--
-- return r;
--}
--
- static int clk_mt2712_mcu_probe(struct platform_device *pdev)
- {
- struct clk_hw_onecell_data *clk_data;
-@@ -1419,12 +1375,6 @@ static const struct of_device_id of_matc
- .compatible = "mediatek,mt2712-topckgen",
- .data = clk_mt2712_top_probe,
- }, {
-- .compatible = "mediatek,mt2712-infracfg",
-- .data = clk_mt2712_infra_probe,
-- }, {
-- .compatible = "mediatek,mt2712-pericfg",
-- .data = clk_mt2712_peri_probe,
-- }, {
- .compatible = "mediatek,mt2712-mcucfg",
- .data = clk_mt2712_mcu_probe,
- }, {
-@@ -1450,6 +1400,33 @@ static int clk_mt2712_probe(struct platf
- return r;
- }
-
-+static const struct mtk_clk_desc infra_desc = {
-+ .clks = infra_clks,
-+ .num_clks = ARRAY_SIZE(infra_clks),
-+ .rst_desc = &clk_rst_desc[0],
-+};
-+
-+static const struct mtk_clk_desc peri_desc = {
-+ .clks = peri_clks,
-+ .num_clks = ARRAY_SIZE(peri_clks),
-+ .rst_desc = &clk_rst_desc[1],
-+};
-+
-+static const struct of_device_id of_match_clk_mt2712_simple[] = {
-+ { .compatible = "mediatek,mt2712-infracfg", .data = &infra_desc },
-+ { .compatible = "mediatek,mt2712-pericfg", .data = &peri_desc, },
-+ { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt2712_simple_drv = {
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
-+ .driver = {
-+ .name = "clk-mt2712-simple",
-+ .of_match_table = of_match_clk_mt2712_simple,
-+ },
-+};
-+
- static struct platform_driver clk_mt2712_drv = {
- .probe = clk_mt2712_probe,
- .driver = {
-@@ -1460,7 +1437,11 @@ static struct platform_driver clk_mt2712
-
- static int __init clk_mt2712_init(void)
- {
-- return platform_driver_register(&clk_mt2712_drv);
-+ int ret = platform_driver_register(&clk_mt2712_drv);
-+
-+ if (ret)
-+ return ret;
-+ return platform_driver_register(&clk_mt2712_simple_drv);
- }
-
- arch_initcall(clk_mt2712_init);
---- a/drivers/clk/mediatek/clk-mt7622-aud.c
-+++ b/drivers/clk/mediatek/clk-mt7622-aud.c
-@@ -106,24 +106,22 @@ static const struct mtk_gate audio_clks[
- GATE_AUDIO3(CLK_AUDIO_MEM_ASRC5, "audio_mem_asrc5", "asm_h_sel", 14),
- };
-
--static int clk_mt7622_audiosys_init(struct platform_device *pdev)
-+static const struct mtk_clk_desc audio_desc = {
-+ .clks = audio_clks,
-+ .num_clks = ARRAY_SIZE(audio_clks),
-+};
-+
-+static int clk_mt7622_aud_probe(struct platform_device *pdev)
- {
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
- int r;
-
-- clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, audio_clks,
-- ARRAY_SIZE(audio_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-+ r = mtk_clk_simple_probe(pdev);
- if (r) {
- dev_err(&pdev->dev,
- "could not register clock provider: %s: %d\n",
- pdev->name, r);
-
-- goto err_clk_provider;
-+ return r;
- }
-
- r = devm_of_platform_populate(&pdev->dev);
-@@ -133,40 +131,24 @@ static int clk_mt7622_audiosys_init(stru
- return 0;
-
- err_plat_populate:
-- of_clk_del_provider(node);
--err_clk_provider:
-+ mtk_clk_simple_remove(pdev);
- return r;
- }
-
--static const struct of_device_id of_match_clk_mt7622_aud[] = {
-- {
-- .compatible = "mediatek,mt7622-audsys",
-- .data = clk_mt7622_audiosys_init,
-- }, {
-- /* sentinel */
-- }
--};
--
--static int clk_mt7622_aud_probe(struct platform_device *pdev)
-+static int clk_mt7622_aud_remove(struct platform_device *pdev)
- {
-- int (*clk_init)(struct platform_device *);
-- int r;
--
-- clk_init = of_device_get_match_data(&pdev->dev);
-- if (!clk_init)
-- return -EINVAL;
--
-- r = clk_init(pdev);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- return r;
-+ of_platform_depopulate(&pdev->dev);
-+ return mtk_clk_simple_remove(pdev);
- }
-
-+static const struct of_device_id of_match_clk_mt7622_aud[] = {
-+ { .compatible = "mediatek,mt7622-audsys", .data = &audio_desc },
-+ { /* sentinel */ }
-+};
-+
- static struct platform_driver clk_mt7622_aud_drv = {
- .probe = clk_mt7622_aud_probe,
-+ .remove = clk_mt7622_aud_remove,
- .driver = {
- .name = "clk-mt7622-aud",
- .of_match_table = of_match_clk_mt7622_aud,
---- a/drivers/clk/mediatek/clk-mt7622-eth.c
-+++ b/drivers/clk/mediatek/clk-mt7622-eth.c
-@@ -61,80 +61,26 @@ static const struct mtk_clk_rst_desc clk
- .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
-
--static int clk_mt7622_ethsys_init(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
--
-- clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, eth_clks,
-- ARRAY_SIZE(eth_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
-- return r;
--}
--
--static int clk_mt7622_sgmiisys_init(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
--
-- clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, sgmii_clks,
-- ARRAY_SIZE(sgmii_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
-+static const struct mtk_clk_desc eth_desc = {
-+ .clks = eth_clks,
-+ .num_clks = ARRAY_SIZE(eth_clks),
-+ .rst_desc = &clk_rst_desc,
-+};
-
-- return r;
--}
-+static const struct mtk_clk_desc sgmii_desc = {
-+ .clks = sgmii_clks,
-+ .num_clks = ARRAY_SIZE(sgmii_clks),
-+};
-
- static const struct of_device_id of_match_clk_mt7622_eth[] = {
-- {
-- .compatible = "mediatek,mt7622-ethsys",
-- .data = clk_mt7622_ethsys_init,
-- }, {
-- .compatible = "mediatek,mt7622-sgmiisys",
-- .data = clk_mt7622_sgmiisys_init,
-- }, {
-- /* sentinel */
-- }
-+ { .compatible = "mediatek,mt7622-ethsys", .data = ð_desc },
-+ { .compatible = "mediatek,mt7622-sgmiisys", .data = &sgmii_desc },
-+ { /* sentinel */ }
- };
-
--static int clk_mt7622_eth_probe(struct platform_device *pdev)
--{
-- int (*clk_init)(struct platform_device *);
-- int r;
--
-- clk_init = of_device_get_match_data(&pdev->dev);
-- if (!clk_init)
-- return -EINVAL;
--
-- r = clk_init(pdev);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- return r;
--}
--
- static struct platform_driver clk_mt7622_eth_drv = {
-- .probe = clk_mt7622_eth_probe,
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
- .driver = {
- .name = "clk-mt7622-eth",
- .of_match_table = of_match_clk_mt7622_eth,
---- a/drivers/clk/mediatek/clk-mt7622-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7622-hif.c
-@@ -72,82 +72,27 @@ static const struct mtk_clk_rst_desc clk
- .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
-
--static int clk_mt7622_ssusbsys_init(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
--
-- clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
-- ARRAY_SIZE(ssusb_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
-- return r;
--}
--
--static int clk_mt7622_pciesys_init(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
--
-- clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
-- ARRAY_SIZE(pcie_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
-+static const struct mtk_clk_desc ssusb_desc = {
-+ .clks = ssusb_clks,
-+ .num_clks = ARRAY_SIZE(ssusb_clks),
-+ .rst_desc = &clk_rst_desc,
-+};
-
-- return r;
--}
-+static const struct mtk_clk_desc pcie_desc = {
-+ .clks = pcie_clks,
-+ .num_clks = ARRAY_SIZE(pcie_clks),
-+ .rst_desc = &clk_rst_desc,
-+};
-
- static const struct of_device_id of_match_clk_mt7622_hif[] = {
-- {
-- .compatible = "mediatek,mt7622-pciesys",
-- .data = clk_mt7622_pciesys_init,
-- }, {
-- .compatible = "mediatek,mt7622-ssusbsys",
-- .data = clk_mt7622_ssusbsys_init,
-- }, {
-- /* sentinel */
-- }
-+ { .compatible = "mediatek,mt7622-pciesys", .data = &pcie_desc },
-+ { .compatible = "mediatek,mt7622-ssusbsys", .data = &ssusb_desc },
-+ { /* sentinel */ }
- };
-
--static int clk_mt7622_hif_probe(struct platform_device *pdev)
--{
-- int (*clk_init)(struct platform_device *);
-- int r;
--
-- clk_init = of_device_get_match_data(&pdev->dev);
-- if (!clk_init)
-- return -EINVAL;
--
-- r = clk_init(pdev);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- return r;
--}
--
- static struct platform_driver clk_mt7622_hif_drv = {
-- .probe = clk_mt7622_hif_probe,
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
- .driver = {
- .name = "clk-mt7622-hif",
- .of_match_table = of_match_clk_mt7622_hif,
---- a/drivers/clk/mediatek/clk-mt7629-hif.c
-+++ b/drivers/clk/mediatek/clk-mt7629-hif.c
-@@ -67,82 +67,27 @@ static const struct mtk_clk_rst_desc clk
- .rst_bank_nr = ARRAY_SIZE(rst_ofs),
- };
-
--static int clk_mt7629_ssusbsys_init(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
--
-- clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, ssusb_clks,
-- ARRAY_SIZE(ssusb_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
--
-- return r;
--}
--
--static int clk_mt7629_pciesys_init(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
--
-- clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK);
--
-- mtk_clk_register_gates(&pdev->dev, node, pcie_clks,
-- ARRAY_SIZE(pcie_clks), clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
-+static const struct mtk_clk_desc ssusb_desc = {
-+ .clks = ssusb_clks,
-+ .num_clks = ARRAY_SIZE(ssusb_clks),
-+ .rst_desc = &clk_rst_desc,
-+};
-
-- return r;
--}
-+static const struct mtk_clk_desc pcie_desc = {
-+ .clks = pcie_clks,
-+ .num_clks = ARRAY_SIZE(pcie_clks),
-+ .rst_desc = &clk_rst_desc,
-+};
-
- static const struct of_device_id of_match_clk_mt7629_hif[] = {
-- {
-- .compatible = "mediatek,mt7629-pciesys",
-- .data = clk_mt7629_pciesys_init,
-- }, {
-- .compatible = "mediatek,mt7629-ssusbsys",
-- .data = clk_mt7629_ssusbsys_init,
-- }, {
-- /* sentinel */
-- }
-+ { .compatible = "mediatek,mt7629-pciesys", .data = &pcie_desc },
-+ { .compatible = "mediatek,mt7629-ssusbsys", .data = &ssusb_desc },
-+ { /* sentinel */ }
- };
-
--static int clk_mt7629_hif_probe(struct platform_device *pdev)
--{
-- int (*clk_init)(struct platform_device *);
-- int r;
--
-- clk_init = of_device_get_match_data(&pdev->dev);
-- if (!clk_init)
-- return -EINVAL;
--
-- r = clk_init(pdev);
-- if (r)
-- dev_err(&pdev->dev,
-- "could not register clock provider: %s: %d\n",
-- pdev->name, r);
--
-- return r;
--}
--
- static struct platform_driver clk_mt7629_hif_drv = {
-- .probe = clk_mt7629_hif_probe,
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
- .driver = {
- .name = "clk-mt7629-hif",
- .of_match_table = of_match_clk_mt7629_hif,
+++ /dev/null
-From 7b6183108c8ccf0dc295f39cdf78bd8078455636 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:42 +0100
-Subject: [PATCH] clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe()
-
-As a preparation to increase probe functions commonization across
-various MediaTek SoC clock controller drivers, extend function
-mtk_clk_simple_probe() to be able to register not only gates, but
-also fixed clocks, factors, muxes and composites.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-13-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mtk.c | 101 ++++++++++++++++++++++++++++++---
- drivers/clk/mediatek/clk-mtk.h | 10 ++++
- 2 files changed, 103 insertions(+), 8 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mtk.c
-+++ b/drivers/clk/mediatek/clk-mtk.c
-@@ -11,12 +11,14 @@
- #include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/of.h>
-+#include <linux/of_address.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
- #include <linux/slab.h>
-
- #include "clk-mtk.h"
- #include "clk-gate.h"
-+#include "clk-mux.h"
-
- const struct mtk_gate_regs cg_regs_dummy = { 0, 0, 0 };
- EXPORT_SYMBOL_GPL(cg_regs_dummy);
-@@ -466,20 +468,71 @@ int mtk_clk_simple_probe(struct platform
- const struct mtk_clk_desc *mcd;
- struct clk_hw_onecell_data *clk_data;
- struct device_node *node = pdev->dev.of_node;
-- int r;
-+ void __iomem *base;
-+ int num_clks, r;
-
- mcd = of_device_get_match_data(&pdev->dev);
- if (!mcd)
- return -EINVAL;
-
-- clk_data = mtk_alloc_clk_data(mcd->num_clks);
-+ /* Composite clocks needs us to pass iomem pointer */
-+ if (mcd->composite_clks) {
-+ if (!mcd->shared_io)
-+ base = devm_platform_ioremap_resource(pdev, 0);
-+ else
-+ base = of_iomap(node, 0);
-+
-+ if (IS_ERR_OR_NULL(base))
-+ return IS_ERR(base) ? PTR_ERR(base) : -ENOMEM;
-+ }
-+
-+ /* Calculate how many clk_hw_onecell_data entries to allocate */
-+ num_clks = mcd->num_clks + mcd->num_composite_clks;
-+ num_clks += mcd->num_fixed_clks + mcd->num_factor_clks;
-+ num_clks += mcd->num_mux_clks;
-+
-+ clk_data = mtk_alloc_clk_data(num_clks);
- if (!clk_data)
- return -ENOMEM;
-
-- r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks, mcd->num_clks,
-- clk_data);
-- if (r)
-- goto free_data;
-+ if (mcd->fixed_clks) {
-+ r = mtk_clk_register_fixed_clks(mcd->fixed_clks,
-+ mcd->num_fixed_clks, clk_data);
-+ if (r)
-+ goto free_data;
-+ }
-+
-+ if (mcd->factor_clks) {
-+ r = mtk_clk_register_factors(mcd->factor_clks,
-+ mcd->num_factor_clks, clk_data);
-+ if (r)
-+ goto unregister_fixed_clks;
-+ }
-+
-+ if (mcd->mux_clks) {
-+ r = mtk_clk_register_muxes(&pdev->dev, mcd->mux_clks,
-+ mcd->num_mux_clks, node,
-+ mcd->clk_lock, clk_data);
-+ if (r)
-+ goto unregister_factors;
-+ };
-+
-+ if (mcd->composite_clks) {
-+ /* We don't check composite_lock because it's optional */
-+ r = mtk_clk_register_composites(&pdev->dev,
-+ mcd->composite_clks,
-+ mcd->num_composite_clks,
-+ base, mcd->clk_lock, clk_data);
-+ if (r)
-+ goto unregister_muxes;
-+ }
-+
-+ if (mcd->clks) {
-+ r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks,
-+ mcd->num_clks, clk_data);
-+ if (r)
-+ goto unregister_composites;
-+ }
-
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r)
-@@ -497,9 +550,28 @@ int mtk_clk_simple_probe(struct platform
- return r;
-
- unregister_clks:
-- mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+ if (mcd->clks)
-+ mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+unregister_composites:
-+ if (mcd->composite_clks)
-+ mtk_clk_unregister_composites(mcd->composite_clks,
-+ mcd->num_composite_clks, clk_data);
-+unregister_muxes:
-+ if (mcd->mux_clks)
-+ mtk_clk_unregister_muxes(mcd->mux_clks,
-+ mcd->num_mux_clks, clk_data);
-+unregister_factors:
-+ if (mcd->factor_clks)
-+ mtk_clk_unregister_factors(mcd->factor_clks,
-+ mcd->num_factor_clks, clk_data);
-+unregister_fixed_clks:
-+ if (mcd->fixed_clks)
-+ mtk_clk_unregister_fixed_clks(mcd->fixed_clks,
-+ mcd->num_fixed_clks, clk_data);
- free_data:
- mtk_free_clk_data(clk_data);
-+ if (mcd->shared_io && base)
-+ iounmap(base);
- return r;
- }
- EXPORT_SYMBOL_GPL(mtk_clk_simple_probe);
-@@ -511,7 +583,20 @@ int mtk_clk_simple_remove(struct platfor
- struct device_node *node = pdev->dev.of_node;
-
- of_clk_del_provider(node);
-- mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+ if (mcd->clks)
-+ mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data);
-+ if (mcd->composite_clks)
-+ mtk_clk_unregister_composites(mcd->composite_clks,
-+ mcd->num_composite_clks, clk_data);
-+ if (mcd->mux_clks)
-+ mtk_clk_unregister_muxes(mcd->mux_clks,
-+ mcd->num_mux_clks, clk_data);
-+ if (mcd->factor_clks)
-+ mtk_clk_unregister_factors(mcd->factor_clks,
-+ mcd->num_factor_clks, clk_data);
-+ if (mcd->fixed_clks)
-+ mtk_clk_unregister_fixed_clks(mcd->fixed_clks,
-+ mcd->num_fixed_clks, clk_data);
- mtk_free_clk_data(clk_data);
-
- return 0;
---- a/drivers/clk/mediatek/clk-mtk.h
-+++ b/drivers/clk/mediatek/clk-mtk.h
-@@ -215,7 +215,17 @@ void mtk_clk_unregister_ref2usb_tx(struc
- struct mtk_clk_desc {
- const struct mtk_gate *clks;
- size_t num_clks;
-+ const struct mtk_composite *composite_clks;
-+ size_t num_composite_clks;
-+ const struct mtk_fixed_clk *fixed_clks;
-+ size_t num_fixed_clks;
-+ const struct mtk_fixed_factor *factor_clks;
-+ size_t num_factor_clks;
-+ const struct mtk_mux *mux_clks;
-+ size_t num_mux_clks;
- const struct mtk_clk_rst_desc *rst_desc;
-+ spinlock_t *clk_lock;
-+ bool shared_io;
- };
-
- int mtk_clk_simple_probe(struct platform_device *pdev);
+++ /dev/null
-From 3511004225ce917a4aa6e6ac61481ac60f08f401 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:52 +0100
-Subject: [PATCH 06/15] clk: mediatek: clk-mt7986-topckgen: Properly keep some
- clocks enabled
-
-Instead of calling clk_prepare_enable() on a bunch of clocks at probe
-time, set the CLK_IS_CRITICAL flag to the same as these are required
-to be always on, and this is the right way of achieving that.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Link: https://lore.kernel.org/r/20230120092053.182923-23-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mt7986-topckgen.c | 46 +++++++++++-----------
- 1 file changed, 24 insertions(+), 22 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c
-+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c
-@@ -202,16 +202,23 @@ static const struct mtk_mux top_muxes[]
- MUX_GATE_CLR_SET_UPD(CLK_TOP_F_26M_ADC_SEL, "f_26m_adc_sel",
- f_26m_adc_parents, 0x020, 0x024, 0x028, 16, 1, 23,
- 0x1C0, 10),
-- MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_SEL, "dramc_sel", f_26m_adc_parents,
-- 0x020, 0x024, 0x028, 24, 1, 31, 0x1C0, 11),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_SEL, "dramc_sel",
-+ f_26m_adc_parents, 0x020, 0x024, 0x028,
-+ 24, 1, 31, 0x1C0, 11,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
- /* CLK_CFG_3 */
-- MUX_GATE_CLR_SET_UPD(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
-- dramc_md32_parents, 0x030, 0x034, 0x038, 0, 1, 7,
-- 0x1C0, 12),
-- MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents,
-- 0x030, 0x034, 0x038, 8, 2, 15, 0x1C0, 13),
-- MUX_GATE_CLR_SET_UPD(CLK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents,
-- 0x030, 0x034, 0x038, 16, 2, 23, 0x1C0, 14),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
-+ dramc_md32_parents, 0x030, 0x034, 0x038,
-+ 0, 1, 7, 0x1C0, 12,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAXI_SEL, "sysaxi_sel",
-+ sysaxi_parents, 0x030, 0x034, 0x038,
-+ 8, 2, 15, 0x1C0, 13,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAPB_SEL, "sysapb_sel",
-+ sysapb_parents, 0x030, 0x034, 0x038,
-+ 16, 2, 23, 0x1C0, 14,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
- MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel",
- arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1,
- 31, 0x1C0, 15),
-@@ -234,9 +241,10 @@ static const struct mtk_mux top_muxes[]
- MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
- sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
- 0x1C0, 21),
-- MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel",
-- sgm_reg_parents, 0x050, 0x054, 0x058, 16, 1, 23,
-- 0x1C0, 22),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel",
-+ sgm_reg_parents, 0x050, 0x054, 0x058,
-+ 16, 1, 23, 0x1C0, 22,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
- MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents,
- 0x050, 0x054, 0x058, 24, 1, 31, 0x1C0, 23),
- /* CLK_CFG_6 */
-@@ -252,9 +260,10 @@ static const struct mtk_mux top_muxes[]
- f_26m_adc_parents, 0x060, 0x064, 0x068, 24, 1, 31,
- 0x1C0, 27),
- /* CLK_CFG_7 */
-- MUX_GATE_CLR_SET_UPD(CLK_TOP_F26M_SEL, "csw_f26m_sel",
-- f_26m_adc_parents, 0x070, 0x074, 0x078, 0, 1, 7,
-- 0x1C0, 28),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_F26M_SEL, "csw_f26m_sel",
-+ f_26m_adc_parents, 0x070, 0x074, 0x078,
-+ 0, 1, 7, 0x1C0, 28,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
- MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents,
- 0x070, 0x074, 0x078, 8, 2, 15, 0x1C0, 29),
- MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel",
-@@ -307,13 +316,6 @@ static int clk_mt7986_topckgen_probe(str
- ARRAY_SIZE(top_muxes), node,
- &mt7986_clk_lock, clk_data);
-
-- clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAXI_SEL]->clk);
-- clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAPB_SEL]->clk);
-- clk_prepare_enable(clk_data->hws[CLK_TOP_DRAMC_SEL]->clk);
-- clk_prepare_enable(clk_data->hws[CLK_TOP_DRAMC_MD32_SEL]->clk);
-- clk_prepare_enable(clk_data->hws[CLK_TOP_F26M_SEL]->clk);
-- clk_prepare_enable(clk_data->hws[CLK_TOP_SGM_REG_SEL]->clk);
--
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-
- if (r) {
+++ /dev/null
-From 9ce3b4e4719d4eec38b2c8da939c073835573d1d Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Fri, 20 Jan 2023 10:20:53 +0100
-Subject: [PATCH 07/15] clk: mediatek: clk-mt7986-topckgen: Migrate to
- mtk_clk_simple_probe()
-
-There are no more non-common calls in clk_mt7986_topckgen_probe():
-migrate this driver to mtk_clk_simple_probe().
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Miles Chen <miles.chen@mediatek.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Link: https://lore.kernel.org/r/20230120092053.182923-24-angelogioacchino.delregno@collabora.com
-Tested-by: Mingming Su <mingming.su@mediatek.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mt7986-topckgen.c | 55 +++++-----------------
- 1 file changed, 13 insertions(+), 42 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c
-+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c
-@@ -290,53 +290,24 @@ static const struct mtk_mux top_muxes[]
- 0x1C4, 5),
- };
-
--static int clk_mt7986_topckgen_probe(struct platform_device *pdev)
--{
-- struct clk_hw_onecell_data *clk_data;
-- struct device_node *node = pdev->dev.of_node;
-- int r;
-- void __iomem *base;
-- int nr = ARRAY_SIZE(top_fixed_clks) + ARRAY_SIZE(top_divs) +
-- ARRAY_SIZE(top_muxes);
--
-- base = of_iomap(node, 0);
-- if (!base) {
-- pr_err("%s(): ioremap failed\n", __func__);
-- return -ENOMEM;
-- }
--
-- clk_data = mtk_alloc_clk_data(nr);
-- if (!clk_data)
-- return -ENOMEM;
--
-- mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks),
-- clk_data);
-- mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
-- mtk_clk_register_muxes(&pdev->dev, top_muxes,
-- ARRAY_SIZE(top_muxes), node,
-- &mt7986_clk_lock, clk_data);
--
-- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
--
-- if (r) {
-- pr_err("%s(): could not register clock provider: %d\n",
-- __func__, r);
-- goto free_topckgen_data;
-- }
-- return r;
--
--free_topckgen_data:
-- mtk_free_clk_data(clk_data);
-- return r;
--}
-+static const struct mtk_clk_desc topck_desc = {
-+ .fixed_clks = top_fixed_clks,
-+ .num_fixed_clks = ARRAY_SIZE(top_fixed_clks),
-+ .factor_clks = top_divs,
-+ .num_factor_clks = ARRAY_SIZE(top_divs),
-+ .mux_clks = top_muxes,
-+ .num_mux_clks = ARRAY_SIZE(top_muxes),
-+ .clk_lock = &mt7986_clk_lock,
-+};
-
- static const struct of_device_id of_match_clk_mt7986_topckgen[] = {
-- { .compatible = "mediatek,mt7986-topckgen", },
-- {}
-+ { .compatible = "mediatek,mt7986-topckgen", .data = &topck_desc },
-+ { /* sentinel */ }
- };
-
- static struct platform_driver clk_mt7986_topckgen_drv = {
-- .probe = clk_mt7986_topckgen_probe,
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
- .driver = {
- .name = "clk-mt7986-topckgen",
- .of_match_table = of_match_clk_mt7986_topckgen,
+++ /dev/null
-From 06abdc84080729dc2c54946e1712c5ee1589ca1c Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Mon, 6 Mar 2023 15:05:21 +0100
-Subject: [PATCH 13/15] clk: mediatek: mt7986-apmixed: Use PLL_AO flag to set
- critical clock
-
-Instead of calling clk_prepare_enable() at probe time, add the PLL_AO
-flag to CLK_APMIXED_ARMPLL clock: this will set CLK_IS_CRITICAL.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/20230306140543.1813621-33-angelogioacchino.delregno@collabora.com
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/clk-mt7986-apmixed.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/clk/mediatek/clk-mt7986-apmixed.c
-+++ b/drivers/clk/mediatek/clk-mt7986-apmixed.c
-@@ -42,7 +42,7 @@
- "clkxtal")
-
- static const struct mtk_pll_data plls[] = {
-- PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, 0, 32,
-+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x0, PLL_AO, 32,
- 0x0200, 4, 0, 0x0204, 0),
- PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x0, 0, 32,
- 0x0210, 4, 0, 0x0214, 0),
-@@ -77,8 +77,6 @@ static int clk_mt7986_apmixed_probe(stru
-
- mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
-
-- clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk);
--
- r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
- if (r) {
- pr_err("%s(): could not register clock provider: %d\n",
+++ /dev/null
-From a6473d0f9f07b1196f3a67099826f50a2a4e84e8 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 03:34:05 +0000
-Subject: [PATCH] dt-bindings: clock: mediatek: add mt7981 clock IDs
-
-Add MT7981 clock dt-bindings, include topckgen, apmixedsys,
-infracfg, and ethernet subsystem clocks.
-
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/e353d32b5a4481766519a037afe1ed44e31ece1a.1674703830.git.daniel@makrotopia.org
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- .../dt-bindings/clock/mediatek,mt7981-clk.h | 215 ++++++++++++++++++
- 1 file changed, 215 insertions(+)
- create mode 100644 include/dt-bindings/clock/mediatek,mt7981-clk.h
-
---- /dev/null
-+++ b/include/dt-bindings/clock/mediatek,mt7981-clk.h
-@@ -0,0 +1,215 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Wenzhen.Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#ifndef _DT_BINDINGS_CLK_MT7981_H
-+#define _DT_BINDINGS_CLK_MT7981_H
-+
-+/* TOPCKGEN */
-+#define CLK_TOP_CB_CKSQ_40M 0
-+#define CLK_TOP_CB_M_416M 1
-+#define CLK_TOP_CB_M_D2 2
-+#define CLK_TOP_CB_M_D3 3
-+#define CLK_TOP_M_D3_D2 4
-+#define CLK_TOP_CB_M_D4 5
-+#define CLK_TOP_CB_M_D8 6
-+#define CLK_TOP_M_D8_D2 7
-+#define CLK_TOP_CB_MM_720M 8
-+#define CLK_TOP_CB_MM_D2 9
-+#define CLK_TOP_CB_MM_D3 10
-+#define CLK_TOP_CB_MM_D3_D5 11
-+#define CLK_TOP_CB_MM_D4 12
-+#define CLK_TOP_CB_MM_D6 13
-+#define CLK_TOP_MM_D6_D2 14
-+#define CLK_TOP_CB_MM_D8 15
-+#define CLK_TOP_CB_APLL2_196M 16
-+#define CLK_TOP_APLL2_D2 17
-+#define CLK_TOP_APLL2_D4 18
-+#define CLK_TOP_NET1_2500M 19
-+#define CLK_TOP_CB_NET1_D4 20
-+#define CLK_TOP_CB_NET1_D5 21
-+#define CLK_TOP_NET1_D5_D2 22
-+#define CLK_TOP_NET1_D5_D4 23
-+#define CLK_TOP_CB_NET1_D8 24
-+#define CLK_TOP_NET1_D8_D2 25
-+#define CLK_TOP_NET1_D8_D4 26
-+#define CLK_TOP_CB_NET2_800M 27
-+#define CLK_TOP_CB_NET2_D2 28
-+#define CLK_TOP_CB_NET2_D4 29
-+#define CLK_TOP_NET2_D4_D2 30
-+#define CLK_TOP_NET2_D4_D4 31
-+#define CLK_TOP_CB_NET2_D6 32
-+#define CLK_TOP_CB_WEDMCU_208M 33
-+#define CLK_TOP_CB_SGM_325M 34
-+#define CLK_TOP_CKSQ_40M_D2 35
-+#define CLK_TOP_CB_RTC_32K 36
-+#define CLK_TOP_CB_RTC_32P7K 37
-+#define CLK_TOP_USB_TX250M 38
-+#define CLK_TOP_FAUD 39
-+#define CLK_TOP_NFI1X 40
-+#define CLK_TOP_USB_EQ_RX250M 41
-+#define CLK_TOP_USB_CDR_CK 42
-+#define CLK_TOP_USB_LN0_CK 43
-+#define CLK_TOP_SPINFI_BCK 44
-+#define CLK_TOP_SPI 45
-+#define CLK_TOP_SPIM_MST 46
-+#define CLK_TOP_UART_BCK 47
-+#define CLK_TOP_PWM_BCK 48
-+#define CLK_TOP_I2C_BCK 49
-+#define CLK_TOP_PEXTP_TL 50
-+#define CLK_TOP_EMMC_208M 51
-+#define CLK_TOP_EMMC_400M 52
-+#define CLK_TOP_DRAMC_REF 53
-+#define CLK_TOP_DRAMC_MD32 54
-+#define CLK_TOP_SYSAXI 55
-+#define CLK_TOP_SYSAPB 56
-+#define CLK_TOP_ARM_DB_MAIN 57
-+#define CLK_TOP_AP2CNN_HOST 58
-+#define CLK_TOP_NETSYS 59
-+#define CLK_TOP_NETSYS_500M 60
-+#define CLK_TOP_NETSYS_WED_MCU 61
-+#define CLK_TOP_NETSYS_2X 62
-+#define CLK_TOP_SGM_325M 63
-+#define CLK_TOP_SGM_REG 64
-+#define CLK_TOP_F26M 65
-+#define CLK_TOP_EIP97B 66
-+#define CLK_TOP_USB3_PHY 67
-+#define CLK_TOP_AUD 68
-+#define CLK_TOP_A1SYS 69
-+#define CLK_TOP_AUD_L 70
-+#define CLK_TOP_A_TUNER 71
-+#define CLK_TOP_U2U3_REF 72
-+#define CLK_TOP_U2U3_SYS 73
-+#define CLK_TOP_U2U3_XHCI 74
-+#define CLK_TOP_USB_FRMCNT 75
-+#define CLK_TOP_NFI1X_SEL 76
-+#define CLK_TOP_SPINFI_SEL 77
-+#define CLK_TOP_SPI_SEL 78
-+#define CLK_TOP_SPIM_MST_SEL 79
-+#define CLK_TOP_UART_SEL 80
-+#define CLK_TOP_PWM_SEL 81
-+#define CLK_TOP_I2C_SEL 82
-+#define CLK_TOP_PEXTP_TL_SEL 83
-+#define CLK_TOP_EMMC_208M_SEL 84
-+#define CLK_TOP_EMMC_400M_SEL 85
-+#define CLK_TOP_F26M_SEL 86
-+#define CLK_TOP_DRAMC_SEL 87
-+#define CLK_TOP_DRAMC_MD32_SEL 88
-+#define CLK_TOP_SYSAXI_SEL 89
-+#define CLK_TOP_SYSAPB_SEL 90
-+#define CLK_TOP_ARM_DB_MAIN_SEL 91
-+#define CLK_TOP_AP2CNN_HOST_SEL 92
-+#define CLK_TOP_NETSYS_SEL 93
-+#define CLK_TOP_NETSYS_500M_SEL 94
-+#define CLK_TOP_NETSYS_MCU_SEL 95
-+#define CLK_TOP_NETSYS_2X_SEL 96
-+#define CLK_TOP_SGM_325M_SEL 97
-+#define CLK_TOP_SGM_REG_SEL 98
-+#define CLK_TOP_EIP97B_SEL 99
-+#define CLK_TOP_USB3_PHY_SEL 100
-+#define CLK_TOP_AUD_SEL 101
-+#define CLK_TOP_A1SYS_SEL 102
-+#define CLK_TOP_AUD_L_SEL 103
-+#define CLK_TOP_A_TUNER_SEL 104
-+#define CLK_TOP_U2U3_SEL 105
-+#define CLK_TOP_U2U3_SYS_SEL 106
-+#define CLK_TOP_U2U3_XHCI_SEL 107
-+#define CLK_TOP_USB_FRMCNT_SEL 108
-+#define CLK_TOP_AUD_I2S_M 109
-+
-+/* INFRACFG */
-+#define CLK_INFRA_66M_MCK 0
-+#define CLK_INFRA_UART0_SEL 1
-+#define CLK_INFRA_UART1_SEL 2
-+#define CLK_INFRA_UART2_SEL 3
-+#define CLK_INFRA_SPI0_SEL 4
-+#define CLK_INFRA_SPI1_SEL 5
-+#define CLK_INFRA_SPI2_SEL 6
-+#define CLK_INFRA_PWM1_SEL 7
-+#define CLK_INFRA_PWM2_SEL 8
-+#define CLK_INFRA_PWM3_SEL 9
-+#define CLK_INFRA_PWM_BSEL 10
-+#define CLK_INFRA_PCIE_SEL 11
-+#define CLK_INFRA_GPT_STA 12
-+#define CLK_INFRA_PWM_HCK 13
-+#define CLK_INFRA_PWM_STA 14
-+#define CLK_INFRA_PWM1_CK 15
-+#define CLK_INFRA_PWM2_CK 16
-+#define CLK_INFRA_PWM3_CK 17
-+#define CLK_INFRA_CQ_DMA_CK 18
-+#define CLK_INFRA_AUD_BUS_CK 19
-+#define CLK_INFRA_AUD_26M_CK 20
-+#define CLK_INFRA_AUD_L_CK 21
-+#define CLK_INFRA_AUD_AUD_CK 22
-+#define CLK_INFRA_AUD_EG2_CK 23
-+#define CLK_INFRA_DRAMC_26M_CK 24
-+#define CLK_INFRA_DBG_CK 25
-+#define CLK_INFRA_AP_DMA_CK 26
-+#define CLK_INFRA_SEJ_CK 27
-+#define CLK_INFRA_SEJ_13M_CK 28
-+#define CLK_INFRA_THERM_CK 29
-+#define CLK_INFRA_I2C0_CK 30
-+#define CLK_INFRA_UART0_CK 31
-+#define CLK_INFRA_UART1_CK 32
-+#define CLK_INFRA_UART2_CK 33
-+#define CLK_INFRA_SPI2_CK 34
-+#define CLK_INFRA_SPI2_HCK_CK 35
-+#define CLK_INFRA_NFI1_CK 36
-+#define CLK_INFRA_SPINFI1_CK 37
-+#define CLK_INFRA_NFI_HCK_CK 38
-+#define CLK_INFRA_SPI0_CK 39
-+#define CLK_INFRA_SPI1_CK 40
-+#define CLK_INFRA_SPI0_HCK_CK 41
-+#define CLK_INFRA_SPI1_HCK_CK 42
-+#define CLK_INFRA_FRTC_CK 43
-+#define CLK_INFRA_MSDC_CK 44
-+#define CLK_INFRA_MSDC_HCK_CK 45
-+#define CLK_INFRA_MSDC_133M_CK 46
-+#define CLK_INFRA_MSDC_66M_CK 47
-+#define CLK_INFRA_ADC_26M_CK 48
-+#define CLK_INFRA_ADC_FRC_CK 49
-+#define CLK_INFRA_FBIST2FPC_CK 50
-+#define CLK_INFRA_I2C_MCK_CK 51
-+#define CLK_INFRA_I2C_PCK_CK 52
-+#define CLK_INFRA_IUSB_133_CK 53
-+#define CLK_INFRA_IUSB_66M_CK 54
-+#define CLK_INFRA_IUSB_SYS_CK 55
-+#define CLK_INFRA_IUSB_CK 56
-+#define CLK_INFRA_IPCIE_CK 57
-+#define CLK_INFRA_IPCIE_PIPE_CK 58
-+#define CLK_INFRA_IPCIER_CK 59
-+#define CLK_INFRA_IPCIEB_CK 60
-+
-+/* APMIXEDSYS */
-+#define CLK_APMIXED_ARMPLL 0
-+#define CLK_APMIXED_NET2PLL 1
-+#define CLK_APMIXED_MMPLL 2
-+#define CLK_APMIXED_SGMPLL 3
-+#define CLK_APMIXED_WEDMCUPLL 4
-+#define CLK_APMIXED_NET1PLL 5
-+#define CLK_APMIXED_MPLL 6
-+#define CLK_APMIXED_APLL2 7
-+
-+/* SGMIISYS_0 */
-+#define CLK_SGM0_TX_EN 0
-+#define CLK_SGM0_RX_EN 1
-+#define CLK_SGM0_CK0_EN 2
-+#define CLK_SGM0_CDR_CK0_EN 3
-+
-+/* SGMIISYS_1 */
-+#define CLK_SGM1_TX_EN 0
-+#define CLK_SGM1_RX_EN 1
-+#define CLK_SGM1_CK1_EN 2
-+#define CLK_SGM1_CDR_CK1_EN 3
-+
-+/* ETHSYS */
-+#define CLK_ETH_FE_EN 0
-+#define CLK_ETH_GP2_EN 1
-+#define CLK_ETH_GP1_EN 2
-+#define CLK_ETH_WOCPU0_EN 3
-+
-+#endif /* _DT_BINDINGS_CLK_MT7981_H */
+++ /dev/null
-From 8efeeb9c8b4ecf4fb4a74be9403aba951403bbaa Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 03:34:24 +0000
-Subject: [PATCH] clk: mediatek: add MT7981 clock support
-
-Add MT7981 clock support, include topckgen, apmixedsys, infracfg and
-ethernet subsystem clocks.
-
-The drivers are based on clk-mt7981.c which can be found in MediaTek's
-SDK sources. To be fit for upstream inclusion the driver has been split
-into clock domains and the infracfg part has been significantly
-de-bloated by removing all the 1:1 factors (aliases).
-
-Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/8136eb5b2049177bc2f6d3e0f2aefecc342d626f.1674703830.git.daniel@makrotopia.org
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-[sboyd@kernel.org: Add module license]
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mediatek/Kconfig | 17 +
- drivers/clk/mediatek/Makefile | 4 +
- drivers/clk/mediatek/clk-mt7981-apmixed.c | 102 +++++
- drivers/clk/mediatek/clk-mt7981-eth.c | 118 ++++++
- drivers/clk/mediatek/clk-mt7981-infracfg.c | 207 ++++++++++
- drivers/clk/mediatek/clk-mt7981-topckgen.c | 422 +++++++++++++++++++++
- 6 files changed, 870 insertions(+)
- create mode 100644 drivers/clk/mediatek/clk-mt7981-apmixed.c
- create mode 100644 drivers/clk/mediatek/clk-mt7981-eth.c
- create mode 100644 drivers/clk/mediatek/clk-mt7981-infracfg.c
- create mode 100644 drivers/clk/mediatek/clk-mt7981-topckgen.c
-
---- a/drivers/clk/mediatek/Kconfig
-+++ b/drivers/clk/mediatek/Kconfig
-@@ -381,6 +381,23 @@ config COMMON_CLK_MT7629_HIFSYS
- This driver supports MediaTek MT7629 HIFSYS clocks providing
- to PCI-E and USB.
-
-+config COMMON_CLK_MT7981
-+ bool "Clock driver for MediaTek MT7981"
-+ depends on ARCH_MEDIATEK || COMPILE_TEST
-+ select COMMON_CLK_MEDIATEK
-+ default ARCH_MEDIATEK
-+ help
-+ This driver supports MediaTek MT7981 basic clocks and clocks
-+ required for various peripherals found on this SoC.
-+
-+config COMMON_CLK_MT7981_ETHSYS
-+ tristate "Clock driver for MediaTek MT7981 ETHSYS"
-+ depends on COMMON_CLK_MT7981
-+ default COMMON_CLK_MT7981
-+ help
-+ This driver adds support for clocks for Ethernet and SGMII
-+ required on MediaTek MT7981 SoC.
-+
- config COMMON_CLK_MT7986
- bool "Clock driver for MediaTek MT7986"
- depends on ARCH_MEDIATEK || COMPILE_TEST
---- a/drivers/clk/mediatek/Makefile
-+++ b/drivers/clk/mediatek/Makefile
-@@ -52,6 +52,10 @@ obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) +
- obj-$(CONFIG_COMMON_CLK_MT7629) += clk-mt7629.o
- obj-$(CONFIG_COMMON_CLK_MT7629_ETHSYS) += clk-mt7629-eth.o
- obj-$(CONFIG_COMMON_CLK_MT7629_HIFSYS) += clk-mt7629-hif.o
-+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-apmixed.o
-+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-topckgen.o
-+obj-$(CONFIG_COMMON_CLK_MT7981) += clk-mt7981-infracfg.o
-+obj-$(CONFIG_COMMON_CLK_MT7981_ETHSYS) += clk-mt7981-eth.o
- obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-apmixed.o
- obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-topckgen.o
- obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986-infracfg.o
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-apmixed.c
-@@ -0,0 +1,102 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-gate.h"
-+#include "clk-mtk.h"
-+#include "clk-mux.h"
-+#include "clk-pll.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+#include <linux/clk.h>
-+
-+#define MT7981_PLL_FMAX (2500UL * MHZ)
-+#define CON0_MT7981_RST_BAR BIT(27)
-+
-+#define PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, \
-+ _div_table, _parent_name) \
-+ { \
-+ .id = _id, .name = _name, .reg = _reg, .pwr_reg = _pwr_reg, \
-+ .en_mask = _en_mask, .flags = _flags, \
-+ .rst_bar_mask = CON0_MT7981_RST_BAR, .fmax = MT7981_PLL_FMAX, \
-+ .pcwbits = _pcwbits, .pd_reg = _pd_reg, .pd_shift = _pd_shift, \
-+ .tuner_reg = _tuner_reg, .pcw_reg = _pcw_reg, \
-+ .pcw_shift = _pcw_shift, .div_table = _div_table, \
-+ .parent_name = _parent_name, \
-+ }
-+
-+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg, \
-+ _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift) \
-+ PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, \
-+ _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, NULL, \
-+ "clkxtal")
-+
-+static const struct mtk_pll_data plls[] = {
-+ PLL(CLK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x00000001, PLL_AO,
-+ 32, 0x0200, 4, 0, 0x0204, 0),
-+ PLL(CLK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x00000001, 0, 32,
-+ 0x0210, 4, 0, 0x0214, 0),
-+ PLL(CLK_APMIXED_MMPLL, "mmpll", 0x0220, 0x022C, 0x00000001, 0, 32,
-+ 0x0220, 4, 0, 0x0224, 0),
-+ PLL(CLK_APMIXED_SGMPLL, "sgmpll", 0x0230, 0x023C, 0x00000001, 0, 32,
-+ 0x0230, 4, 0, 0x0234, 0),
-+ PLL(CLK_APMIXED_WEDMCUPLL, "wedmcupll", 0x0240, 0x024C, 0x00000001, 0, 32,
-+ 0x0240, 4, 0, 0x0244, 0),
-+ PLL(CLK_APMIXED_NET1PLL, "net1pll", 0x0250, 0x025C, 0x00000001, 0, 32,
-+ 0x0250, 4, 0, 0x0254, 0),
-+ PLL(CLK_APMIXED_MPLL, "mpll", 0x0260, 0x0270, 0x00000001, 0, 32,
-+ 0x0260, 4, 0, 0x0264, 0),
-+ PLL(CLK_APMIXED_APLL2, "apll2", 0x0278, 0x0288, 0x00000001, 0, 32,
-+ 0x0278, 4, 0, 0x027C, 0),
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_apmixed[] = {
-+ { .compatible = "mediatek,mt7981-apmixedsys", },
-+ { /* sentinel */ }
-+};
-+
-+static int clk_mt7981_apmixed_probe(struct platform_device *pdev)
-+{
-+ struct clk_hw_onecell_data *clk_data;
-+ struct device_node *node = pdev->dev.of_node;
-+ int r;
-+
-+ clk_data = mtk_alloc_clk_data(ARRAY_SIZE(plls));
-+ if (!clk_data)
-+ return -ENOMEM;
-+
-+ mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
-+
-+ r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data);
-+ if (r) {
-+ pr_err("%s(): could not register clock provider: %d\n",
-+ __func__, r);
-+ goto free_apmixed_data;
-+ }
-+ return r;
-+
-+free_apmixed_data:
-+ mtk_free_clk_data(clk_data);
-+ return r;
-+}
-+
-+static struct platform_driver clk_mt7981_apmixed_drv = {
-+ .probe = clk_mt7981_apmixed_probe,
-+ .driver = {
-+ .name = "clk-mt7981-apmixed",
-+ .of_match_table = of_match_clk_mt7981_apmixed,
-+ },
-+};
-+builtin_platform_driver(clk_mt7981_apmixed_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-eth.c
-@@ -0,0 +1,118 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+
-+static const struct mtk_gate_regs sgmii0_cg_regs = {
-+ .set_ofs = 0xE4,
-+ .clr_ofs = 0xE4,
-+ .sta_ofs = 0xE4,
-+};
-+
-+#define GATE_SGMII0(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &sgmii0_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate sgmii0_clks[] __initconst = {
-+ GATE_SGMII0(CLK_SGM0_TX_EN, "sgm0_tx_en", "usb_tx250m", 2),
-+ GATE_SGMII0(CLK_SGM0_RX_EN, "sgm0_rx_en", "usb_eq_rx250m", 3),
-+ GATE_SGMII0(CLK_SGM0_CK0_EN, "sgm0_ck0_en", "usb_ln0", 4),
-+ GATE_SGMII0(CLK_SGM0_CDR_CK0_EN, "sgm0_cdr_ck0_en", "usb_cdr", 5),
-+};
-+
-+static const struct mtk_gate_regs sgmii1_cg_regs = {
-+ .set_ofs = 0xE4,
-+ .clr_ofs = 0xE4,
-+ .sta_ofs = 0xE4,
-+};
-+
-+#define GATE_SGMII1(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = &sgmii1_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate sgmii1_clks[] __initconst = {
-+ GATE_SGMII1(CLK_SGM1_TX_EN, "sgm1_tx_en", "usb_tx250m", 2),
-+ GATE_SGMII1(CLK_SGM1_RX_EN, "sgm1_rx_en", "usb_eq_rx250m", 3),
-+ GATE_SGMII1(CLK_SGM1_CK1_EN, "sgm1_ck1_en", "usb_ln0", 4),
-+ GATE_SGMII1(CLK_SGM1_CDR_CK1_EN, "sgm1_cdr_ck1_en", "usb_cdr", 5),
-+};
-+
-+static const struct mtk_gate_regs eth_cg_regs = {
-+ .set_ofs = 0x30,
-+ .clr_ofs = 0x30,
-+ .sta_ofs = 0x30,
-+};
-+
-+#define GATE_ETH(_id, _name, _parent, _shift) { \
-+ .id = _id, \
-+ .name = _name, \
-+ .parent_name = _parent, \
-+ .regs = ð_cg_regs, \
-+ .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_no_setclr_inv, \
-+ }
-+
-+static const struct mtk_gate eth_clks[] __initconst = {
-+ GATE_ETH(CLK_ETH_FE_EN, "eth_fe_en", "netsys_2x", 6),
-+ GATE_ETH(CLK_ETH_GP2_EN, "eth_gp2_en", "sgm_325m", 7),
-+ GATE_ETH(CLK_ETH_GP1_EN, "eth_gp1_en", "sgm_325m", 8),
-+ GATE_ETH(CLK_ETH_WOCPU0_EN, "eth_wocpu0_en", "netsys_wed_mcu", 15),
-+};
-+
-+static const struct mtk_clk_desc eth_desc = {
-+ .clks = eth_clks,
-+ .num_clks = ARRAY_SIZE(eth_clks),
-+};
-+
-+static const struct mtk_clk_desc sgmii0_desc = {
-+ .clks = sgmii0_clks,
-+ .num_clks = ARRAY_SIZE(sgmii0_clks),
-+};
-+
-+static const struct mtk_clk_desc sgmii1_desc = {
-+ .clks = sgmii1_clks,
-+ .num_clks = ARRAY_SIZE(sgmii1_clks),
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_eth[] = {
-+ { .compatible = "mediatek,mt7981-ethsys", .data = ð_desc },
-+ { .compatible = "mediatek,mt7981-sgmiisys_0", .data = &sgmii0_desc },
-+ { .compatible = "mediatek,mt7981-sgmiisys_1", .data = &sgmii1_desc },
-+ { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt7981_eth_drv = {
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
-+ .driver = {
-+ .name = "clk-mt7981-eth",
-+ .of_match_table = of_match_clk_mt7981_eth,
-+ },
-+};
-+module_platform_driver(clk_mt7981_eth_drv);
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-infracfg.c
-@@ -0,0 +1,207 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ * Author: Daniel Golle <daniel@makrotopia.org>
-+ */
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+#include "clk-mux.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+#include <linux/clk.h>
-+
-+static DEFINE_SPINLOCK(mt7981_clk_lock);
-+
-+static const struct mtk_fixed_factor infra_divs[] = {
-+ FACTOR(CLK_INFRA_66M_MCK, "infra_66m_mck", "sysaxi_sel", 1, 2),
-+};
-+
-+static const char *const infra_uart_parent[] __initconst = { "csw_f26m_sel",
-+ "uart_sel" };
-+
-+static const char *const infra_spi0_parents[] __initconst = { "i2c_sel",
-+ "spi_sel" };
-+
-+static const char *const infra_spi1_parents[] __initconst = { "i2c_sel",
-+ "spim_mst_sel" };
-+
-+static const char *const infra_pwm1_parents[] __initconst = { "pwm_sel" };
-+
-+static const char *const infra_pwm_bsel_parents[] __initconst = {
-+ "cb_rtc_32p7k", "csw_f26m_sel", "infra_66m_mck", "pwm_sel"
-+};
-+
-+static const char *const infra_pcie_parents[] __initconst = {
-+ "cb_rtc_32p7k", "csw_f26m_sel", "cb_cksq_40m", "pextp_tl_ck_sel"
-+};
-+
-+static const struct mtk_mux infra_muxes[] = {
-+ /* MODULE_CLK_SEL_0 */
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART0_SEL, "infra_uart0_sel",
-+ infra_uart_parent, 0x0018, 0x0010, 0x0014, 0, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART1_SEL, "infra_uart1_sel",
-+ infra_uart_parent, 0x0018, 0x0010, 0x0014, 1, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_UART2_SEL, "infra_uart2_sel",
-+ infra_uart_parent, 0x0018, 0x0010, 0x0014, 2, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI0_SEL, "infra_spi0_sel",
-+ infra_spi0_parents, 0x0018, 0x0010, 0x0014, 4, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI1_SEL, "infra_spi1_sel",
-+ infra_spi1_parents, 0x0018, 0x0010, 0x0014, 5, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_SPI2_SEL, "infra_spi2_sel",
-+ infra_spi0_parents, 0x0018, 0x0010, 0x0014, 6, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM1_SEL, "infra_pwm1_sel",
-+ infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 9, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM2_SEL, "infra_pwm2_sel",
-+ infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 11, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM3_SEL, "infra_pwm3_sel",
-+ infra_pwm1_parents, 0x0018, 0x0010, 0x0014, 15, 1,
-+ -1, -1, -1),
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PWM_BSEL, "infra_pwm_bsel",
-+ infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 13,
-+ 2, -1, -1, -1),
-+ /* MODULE_CLK_SEL_1 */
-+ MUX_GATE_CLR_SET_UPD(CLK_INFRA_PCIE_SEL, "infra_pcie_sel",
-+ infra_pcie_parents, 0x0028, 0x0020, 0x0024, 0, 2,
-+ -1, -1, -1),
-+};
-+
-+static const struct mtk_gate_regs infra0_cg_regs = {
-+ .set_ofs = 0x40,
-+ .clr_ofs = 0x44,
-+ .sta_ofs = 0x48,
-+};
-+
-+static const struct mtk_gate_regs infra1_cg_regs = {
-+ .set_ofs = 0x50,
-+ .clr_ofs = 0x54,
-+ .sta_ofs = 0x58,
-+};
-+
-+static const struct mtk_gate_regs infra2_cg_regs = {
-+ .set_ofs = 0x60,
-+ .clr_ofs = 0x64,
-+ .sta_ofs = 0x68,
-+};
-+
-+#define GATE_INFRA0(_id, _name, _parent, _shift) \
-+ { \
-+ .id = _id, .name = _name, .parent_name = _parent, \
-+ .regs = &infra0_cg_regs, .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_INFRA1(_id, _name, _parent, _shift) \
-+ { \
-+ .id = _id, .name = _name, .parent_name = _parent, \
-+ .regs = &infra1_cg_regs, .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+#define GATE_INFRA2(_id, _name, _parent, _shift) \
-+ { \
-+ .id = _id, .name = _name, .parent_name = _parent, \
-+ .regs = &infra2_cg_regs, .shift = _shift, \
-+ .ops = &mtk_clk_gate_ops_setclr, \
-+ }
-+
-+static const struct mtk_gate infra_clks[] = {
-+ /* INFRA0 */
-+ GATE_INFRA0(CLK_INFRA_GPT_STA, "infra_gpt_sta", "infra_66m_mck", 0),
-+ GATE_INFRA0(CLK_INFRA_PWM_HCK, "infra_pwm_hck", "infra_66m_mck", 1),
-+ GATE_INFRA0(CLK_INFRA_PWM_STA, "infra_pwm_sta", "infra_pwm_bsel", 2),
-+ GATE_INFRA0(CLK_INFRA_PWM1_CK, "infra_pwm1", "infra_pwm1_sel", 3),
-+ GATE_INFRA0(CLK_INFRA_PWM2_CK, "infra_pwm2", "infra_pwm2_sel", 4),
-+ GATE_INFRA0(CLK_INFRA_CQ_DMA_CK, "infra_cq_dma", "sysaxi", 6),
-+
-+ GATE_INFRA0(CLK_INFRA_AUD_BUS_CK, "infra_aud_bus", "sysaxi", 8),
-+ GATE_INFRA0(CLK_INFRA_AUD_26M_CK, "infra_aud_26m", "csw_f26m_sel", 9),
-+ GATE_INFRA0(CLK_INFRA_AUD_L_CK, "infra_aud_l", "aud_l", 10),
-+ GATE_INFRA0(CLK_INFRA_AUD_AUD_CK, "infra_aud_aud", "a1sys", 11),
-+ GATE_INFRA0(CLK_INFRA_AUD_EG2_CK, "infra_aud_eg2", "a_tuner", 13),
-+ GATE_INFRA0(CLK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", "csw_f26m_sel",
-+ 14),
-+ GATE_INFRA0(CLK_INFRA_DBG_CK, "infra_dbg", "infra_66m_mck", 15),
-+ GATE_INFRA0(CLK_INFRA_AP_DMA_CK, "infra_ap_dma", "infra_66m_mck", 16),
-+ GATE_INFRA0(CLK_INFRA_SEJ_CK, "infra_sej", "infra_66m_mck", 24),
-+ GATE_INFRA0(CLK_INFRA_SEJ_13M_CK, "infra_sej_13m", "csw_f26m_sel", 25),
-+ GATE_INFRA0(CLK_INFRA_PWM3_CK, "infra_pwm3", "infra_pwm3_sel", 27),
-+ /* INFRA1 */
-+ GATE_INFRA1(CLK_INFRA_THERM_CK, "infra_therm", "csw_f26m_sel", 0),
-+ GATE_INFRA1(CLK_INFRA_I2C0_CK, "infra_i2c0", "i2c_bck", 1),
-+ GATE_INFRA1(CLK_INFRA_UART0_CK, "infra_uart0", "infra_uart0_sel", 2),
-+ GATE_INFRA1(CLK_INFRA_UART1_CK, "infra_uart1", "infra_uart1_sel", 3),
-+ GATE_INFRA1(CLK_INFRA_UART2_CK, "infra_uart2", "infra_uart2_sel", 4),
-+ GATE_INFRA1(CLK_INFRA_SPI2_CK, "infra_spi2", "infra_spi2_sel", 6),
-+ GATE_INFRA1(CLK_INFRA_SPI2_HCK_CK, "infra_spi2_hck", "infra_66m_mck", 7),
-+ GATE_INFRA1(CLK_INFRA_NFI1_CK, "infra_nfi1", "nfi1x", 8),
-+ GATE_INFRA1(CLK_INFRA_SPINFI1_CK, "infra_spinfi1", "spinfi_bck", 9),
-+ GATE_INFRA1(CLK_INFRA_NFI_HCK_CK, "infra_nfi_hck", "infra_66m_mck", 10),
-+ GATE_INFRA1(CLK_INFRA_SPI0_CK, "infra_spi0", "infra_spi0_sel", 11),
-+ GATE_INFRA1(CLK_INFRA_SPI1_CK, "infra_spi1", "infra_spi1_sel", 12),
-+ GATE_INFRA1(CLK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", "infra_66m_mck",
-+ 13),
-+ GATE_INFRA1(CLK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", "infra_66m_mck",
-+ 14),
-+ GATE_INFRA1(CLK_INFRA_FRTC_CK, "infra_frtc", "cb_rtc_32k", 15),
-+ GATE_INFRA1(CLK_INFRA_MSDC_CK, "infra_msdc", "emmc_400m", 16),
-+ GATE_INFRA1(CLK_INFRA_MSDC_HCK_CK, "infra_msdc_hck", "emmc_208m", 17),
-+ GATE_INFRA1(CLK_INFRA_MSDC_133M_CK, "infra_msdc_133m", "sysaxi", 18),
-+ GATE_INFRA1(CLK_INFRA_MSDC_66M_CK, "infra_msdc_66m", "sysaxi", 19),
-+ GATE_INFRA1(CLK_INFRA_ADC_26M_CK, "infra_adc_26m", "infra_adc_frc", 20),
-+ GATE_INFRA1(CLK_INFRA_ADC_FRC_CK, "infra_adc_frc", "csw_f26m", 21),
-+ GATE_INFRA1(CLK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", "nfi1x", 23),
-+ GATE_INFRA1(CLK_INFRA_I2C_MCK_CK, "infra_i2c_mck", "sysaxi", 25),
-+ GATE_INFRA1(CLK_INFRA_I2C_PCK_CK, "infra_i2c_pck", "infra_66m_mck", 26),
-+ /* INFRA2 */
-+ GATE_INFRA2(CLK_INFRA_IUSB_133_CK, "infra_iusb_133", "sysaxi", 0),
-+ GATE_INFRA2(CLK_INFRA_IUSB_66M_CK, "infra_iusb_66m", "sysaxi", 1),
-+ GATE_INFRA2(CLK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", "u2u3_sys", 2),
-+ GATE_INFRA2(CLK_INFRA_IUSB_CK, "infra_iusb", "u2u3_ref", 3),
-+ GATE_INFRA2(CLK_INFRA_IPCIE_CK, "infra_ipcie", "pextp_tl", 12),
-+ GATE_INFRA2(CLK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", "cb_cksq_40m",
-+ 13),
-+ GATE_INFRA2(CLK_INFRA_IPCIER_CK, "infra_ipcier", "csw_f26m", 14),
-+ GATE_INFRA2(CLK_INFRA_IPCIEB_CK, "infra_ipcieb", "sysaxi", 15),
-+};
-+
-+static const struct mtk_clk_desc infracfg_desc = {
-+ .factor_clks = infra_divs,
-+ .num_factor_clks = ARRAY_SIZE(infra_divs),
-+ .mux_clks = infra_muxes,
-+ .num_mux_clks = ARRAY_SIZE(infra_muxes),
-+ .clks = infra_clks,
-+ .num_clks = ARRAY_SIZE(infra_clks),
-+ .clk_lock = &mt7981_clk_lock,
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_infracfg[] = {
-+ { .compatible = "mediatek,mt7981-infracfg", .data = &infracfg_desc },
-+ { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt7981_infracfg_drv = {
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
-+ .driver = {
-+ .name = "clk-mt7981-infracfg",
-+ .of_match_table = of_match_clk_mt7981_infracfg,
-+ },
-+};
-+builtin_platform_driver(clk_mt7981_infracfg_drv);
---- /dev/null
-+++ b/drivers/clk/mediatek/clk-mt7981-topckgen.c
-@@ -0,0 +1,422 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright (c) 2021 MediaTek Inc.
-+ * Author: Sam Shih <sam.shih@mediatek.com>
-+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
-+ * Author: Jianhui Zhao <zhaojh329@gmail.com>
-+ */
-+
-+
-+#include <linux/clk-provider.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include "clk-mtk.h"
-+#include "clk-gate.h"
-+#include "clk-mux.h"
-+
-+#include <dt-bindings/clock/mediatek,mt7981-clk.h>
-+#include <linux/clk.h>
-+
-+static DEFINE_SPINLOCK(mt7981_clk_lock);
-+
-+static const struct mtk_fixed_factor top_divs[] = {
-+ FACTOR(CLK_TOP_CB_CKSQ_40M, "cb_cksq_40m", "clkxtal", 1, 1),
-+ FACTOR(CLK_TOP_CB_M_416M, "cb_m_416m", "mpll", 1, 1),
-+ FACTOR(CLK_TOP_CB_M_D2, "cb_m_d2", "mpll", 1, 2),
-+ FACTOR(CLK_TOP_CB_M_D3, "cb_m_d3", "mpll", 1, 3),
-+ FACTOR(CLK_TOP_M_D3_D2, "m_d3_d2", "mpll", 1, 2),
-+ FACTOR(CLK_TOP_CB_M_D4, "cb_m_d4", "mpll", 1, 4),
-+ FACTOR(CLK_TOP_CB_M_D8, "cb_m_d8", "mpll", 1, 8),
-+ FACTOR(CLK_TOP_M_D8_D2, "m_d8_d2", "mpll", 1, 16),
-+ FACTOR(CLK_TOP_CB_MM_720M, "cb_mm_720m", "mmpll", 1, 1),
-+ FACTOR(CLK_TOP_CB_MM_D2, "cb_mm_d2", "mmpll", 1, 2),
-+ FACTOR(CLK_TOP_CB_MM_D3, "cb_mm_d3", "mmpll", 1, 3),
-+ FACTOR(CLK_TOP_CB_MM_D3_D5, "cb_mm_d3_d5", "mmpll", 1, 15),
-+ FACTOR(CLK_TOP_CB_MM_D4, "cb_mm_d4", "mmpll", 1, 4),
-+ FACTOR(CLK_TOP_CB_MM_D6, "cb_mm_d6", "mmpll", 1, 6),
-+ FACTOR(CLK_TOP_MM_D6_D2, "mm_d6_d2", "mmpll", 1, 12),
-+ FACTOR(CLK_TOP_CB_MM_D8, "cb_mm_d8", "mmpll", 1, 8),
-+ FACTOR(CLK_TOP_CB_APLL2_196M, "cb_apll2_196m", "apll2", 1, 1),
-+ FACTOR(CLK_TOP_APLL2_D2, "apll2_d2", "apll2", 1, 2),
-+ FACTOR(CLK_TOP_APLL2_D4, "apll2_d4", "apll2", 1, 4),
-+ FACTOR(CLK_TOP_NET1_2500M, "net1_2500m", "net1pll", 1, 1),
-+ FACTOR(CLK_TOP_CB_NET1_D4, "cb_net1_d4", "net1pll", 1, 4),
-+ FACTOR(CLK_TOP_CB_NET1_D5, "cb_net1_d5", "net1pll", 1, 5),
-+ FACTOR(CLK_TOP_NET1_D5_D2, "net1_d5_d2", "net1pll", 1, 10),
-+ FACTOR(CLK_TOP_NET1_D5_D4, "net1_d5_d4", "net1pll", 1, 20),
-+ FACTOR(CLK_TOP_CB_NET1_D8, "cb_net1_d8", "net1pll", 1, 8),
-+ FACTOR(CLK_TOP_NET1_D8_D2, "net1_d8_d2", "net1pll", 1, 16),
-+ FACTOR(CLK_TOP_NET1_D8_D4, "net1_d8_d4", "net1pll", 1, 32),
-+ FACTOR(CLK_TOP_CB_NET2_800M, "cb_net2_800m", "net2pll", 1, 1),
-+ FACTOR(CLK_TOP_CB_NET2_D2, "cb_net2_d2", "net2pll", 1, 2),
-+ FACTOR(CLK_TOP_CB_NET2_D4, "cb_net2_d4", "net2pll", 1, 4),
-+ FACTOR(CLK_TOP_NET2_D4_D2, "net2_d4_d2", "net2pll", 1, 8),
-+ FACTOR(CLK_TOP_NET2_D4_D4, "net2_d4_d4", "net2pll", 1, 16),
-+ FACTOR(CLK_TOP_CB_NET2_D6, "cb_net2_d6", "net2pll", 1, 6),
-+ FACTOR(CLK_TOP_CB_WEDMCU_208M, "cb_wedmcu_208m", "wedmcupll", 1, 1),
-+ FACTOR(CLK_TOP_CB_SGM_325M, "cb_sgm_325m", "sgmpll", 1, 1),
-+ FACTOR(CLK_TOP_CKSQ_40M_D2, "cksq_40m_d2", "cb_cksq_40m", 1, 2),
-+ FACTOR(CLK_TOP_CB_RTC_32K, "cb_rtc_32k", "cb_cksq_40m", 1, 1250),
-+ FACTOR(CLK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", "cb_cksq_40m", 1, 1220),
-+ FACTOR(CLK_TOP_USB_TX250M, "usb_tx250m", "cb_cksq_40m", 1, 1),
-+ FACTOR(CLK_TOP_FAUD, "faud", "aud_sel", 1, 1),
-+ FACTOR(CLK_TOP_NFI1X, "nfi1x", "nfi1x_sel", 1, 1),
-+ FACTOR(CLK_TOP_USB_EQ_RX250M, "usb_eq_rx250m", "cb_cksq_40m", 1, 1),
-+ FACTOR(CLK_TOP_USB_CDR_CK, "usb_cdr", "cb_cksq_40m", 1, 1),
-+ FACTOR(CLK_TOP_USB_LN0_CK, "usb_ln0", "cb_cksq_40m", 1, 1),
-+ FACTOR(CLK_TOP_SPINFI_BCK, "spinfi_bck", "spinfi_sel", 1, 1),
-+ FACTOR(CLK_TOP_SPI, "spi", "spi_sel", 1, 1),
-+ FACTOR(CLK_TOP_SPIM_MST, "spim_mst", "spim_mst_sel", 1, 1),
-+ FACTOR(CLK_TOP_UART_BCK, "uart_bck", "uart_sel", 1, 1),
-+ FACTOR(CLK_TOP_PWM_BCK, "pwm_bck", "pwm_sel", 1, 1),
-+ FACTOR(CLK_TOP_I2C_BCK, "i2c_bck", "i2c_sel", 1, 1),
-+ FACTOR(CLK_TOP_PEXTP_TL, "pextp_tl", "pextp_tl_ck_sel", 1, 1),
-+ FACTOR(CLK_TOP_EMMC_208M, "emmc_208m", "emmc_208m_sel", 1, 1),
-+ FACTOR(CLK_TOP_EMMC_400M, "emmc_400m", "emmc_400m_sel", 1, 1),
-+ FACTOR(CLK_TOP_DRAMC_REF, "dramc_ref", "dramc_sel", 1, 1),
-+ FACTOR(CLK_TOP_DRAMC_MD32, "dramc_md32", "dramc_md32_sel", 1, 1),
-+ FACTOR(CLK_TOP_SYSAXI, "sysaxi", "sysaxi_sel", 1, 1),
-+ FACTOR(CLK_TOP_SYSAPB, "sysapb", "sysapb_sel", 1, 1),
-+ FACTOR(CLK_TOP_ARM_DB_MAIN, "arm_db_main", "arm_db_main_sel", 1, 1),
-+ FACTOR(CLK_TOP_AP2CNN_HOST, "ap2cnn_host", "ap2cnn_host_sel", 1, 1),
-+ FACTOR(CLK_TOP_NETSYS, "netsys", "netsys_sel", 1, 1),
-+ FACTOR(CLK_TOP_NETSYS_500M, "netsys_500m", "netsys_500m_sel", 1, 1),
-+ FACTOR(CLK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu", "netsys_mcu_sel", 1, 1),
-+ FACTOR(CLK_TOP_NETSYS_2X, "netsys_2x", "netsys_2x_sel", 1, 1),
-+ FACTOR(CLK_TOP_SGM_325M, "sgm_325m", "sgm_325m_sel", 1, 1),
-+ FACTOR(CLK_TOP_SGM_REG, "sgm_reg", "sgm_reg_sel", 1, 1),
-+ FACTOR(CLK_TOP_F26M, "csw_f26m", "csw_f26m_sel", 1, 1),
-+ FACTOR(CLK_TOP_EIP97B, "eip97b", "eip97b_sel", 1, 1),
-+ FACTOR(CLK_TOP_USB3_PHY, "usb3_phy", "usb3_phy_sel", 1, 1),
-+ FACTOR(CLK_TOP_AUD, "aud", "faud", 1, 1),
-+ FACTOR(CLK_TOP_A1SYS, "a1sys", "a1sys_sel", 1, 1),
-+ FACTOR(CLK_TOP_AUD_L, "aud_l", "aud_l_sel", 1, 1),
-+ FACTOR(CLK_TOP_A_TUNER, "a_tuner", "a_tuner_sel", 1, 1),
-+ FACTOR(CLK_TOP_U2U3_REF, "u2u3_ref", "u2u3_sel", 1, 1),
-+ FACTOR(CLK_TOP_U2U3_SYS, "u2u3_sys", "u2u3_sys_sel", 1, 1),
-+ FACTOR(CLK_TOP_U2U3_XHCI, "u2u3_xhci", "u2u3_xhci_sel", 1, 1),
-+ FACTOR(CLK_TOP_USB_FRMCNT, "usb_frmcnt", "usb_frmcnt_sel", 1, 1),
-+};
-+
-+static const char * const nfi1x_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_mm_d4",
-+ "net1_d8_d2",
-+ "cb_net2_d6",
-+ "cb_m_d4",
-+ "cb_mm_d8",
-+ "net1_d8_d4",
-+ "cb_m_d8"
-+};
-+
-+static const char * const spinfi_parents[] __initconst = {
-+ "cksq_40m_d2",
-+ "cb_cksq_40m",
-+ "net1_d5_d4",
-+ "cb_m_d4",
-+ "cb_mm_d8",
-+ "net1_d8_d4",
-+ "mm_d6_d2",
-+ "cb_m_d8"
-+};
-+
-+static const char * const spi_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_m_d2",
-+ "cb_mm_d4",
-+ "net1_d8_d2",
-+ "cb_net2_d6",
-+ "net1_d5_d4",
-+ "cb_m_d4",
-+ "net1_d8_d4"
-+};
-+
-+static const char * const uart_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_m_d8",
-+ "m_d8_d2"
-+};
-+
-+static const char * const pwm_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "net1_d8_d2",
-+ "net1_d5_d4",
-+ "cb_m_d4",
-+ "m_d8_d2",
-+ "cb_rtc_32k"
-+};
-+
-+static const char * const i2c_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "net1_d5_d4",
-+ "cb_m_d4",
-+ "net1_d8_d4"
-+};
-+
-+static const char * const pextp_tl_ck_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "net1_d5_d4",
-+ "cb_m_d4",
-+ "cb_rtc_32k"
-+};
-+
-+static const char * const emmc_208m_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_m_d2",
-+ "cb_net2_d4",
-+ "cb_apll2_196m",
-+ "cb_mm_d4",
-+ "net1_d8_d2",
-+ "cb_mm_d6"
-+};
-+
-+static const char * const emmc_400m_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_net2_d2",
-+ "cb_mm_d2",
-+ "cb_net2_d2"
-+};
-+
-+static const char * const csw_f26m_parents[] __initconst = {
-+ "cksq_40m_d2",
-+ "m_d8_d2"
-+};
-+
-+static const char * const dramc_md32_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_m_d2",
-+ "cb_wedmcu_208m"
-+};
-+
-+static const char * const sysaxi_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "net1_d8_d2"
-+};
-+
-+static const char * const sysapb_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "m_d3_d2"
-+};
-+
-+static const char * const arm_db_main_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_net2_d6"
-+};
-+
-+static const char * const ap2cnn_host_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "net1_d8_d4"
-+};
-+
-+static const char * const netsys_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_mm_d2"
-+};
-+
-+static const char * const netsys_500m_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_net1_d5"
-+};
-+
-+static const char * const netsys_mcu_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_mm_720m",
-+ "cb_net1_d4",
-+ "cb_net1_d5",
-+ "cb_m_416m"
-+};
-+
-+static const char * const netsys_2x_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_net2_800m",
-+ "cb_mm_720m"
-+};
-+
-+static const char * const sgm_325m_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_sgm_325m"
-+};
-+
-+static const char * const sgm_reg_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_net2_d4"
-+};
-+
-+static const char * const eip97b_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_net1_d5",
-+ "cb_m_416m",
-+ "cb_mm_d2",
-+ "net1_d5_d2"
-+};
-+
-+static const char * const aud_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_apll2_196m"
-+};
-+
-+static const char * const a1sys_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "apll2_d4"
-+};
-+
-+static const char * const aud_l_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_apll2_196m",
-+ "m_d8_d2"
-+};
-+
-+static const char * const a_tuner_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "apll2_d4",
-+ "m_d8_d2"
-+};
-+
-+static const char * const u2u3_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "m_d8_d2"
-+};
-+
-+static const char * const u2u3_sys_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "net1_d5_d4"
-+};
-+
-+static const char * const usb_frmcnt_parents[] __initconst = {
-+ "cb_cksq_40m",
-+ "cb_mm_d3_d5"
-+};
-+
-+static const struct mtk_mux top_muxes[] = {
-+ /* CLK_CFG_0 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents,
-+ 0x000, 0x004, 0x008, 0, 3, 7, 0x1C0, 0),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents,
-+ 0x000, 0x004, 0x008, 8, 3, 15, 0x1C0, 1),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPI_SEL, "spi_sel", spi_parents,
-+ 0x000, 0x004, 0x008, 16, 3, 23, 0x1C0, 2),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents,
-+ 0x000, 0x004, 0x008, 24, 3, 31, 0x1C0, 3),
-+ /* CLK_CFG_1 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_UART_SEL, "uart_sel", uart_parents,
-+ 0x010, 0x014, 0x018, 0, 2, 7, 0x1C0, 4),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PWM_SEL, "pwm_sel", pwm_parents,
-+ 0x010, 0x014, 0x018, 8, 3, 15, 0x1C0, 5),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_I2C_SEL, "i2c_sel", i2c_parents,
-+ 0x010, 0x014, 0x018, 16, 2, 23, 0x1C0, 6),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel",
-+ pextp_tl_ck_parents, 0x010, 0x014, 0x018, 24, 2, 31,
-+ 0x1C0, 7),
-+ /* CLK_CFG_2 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_208M_SEL, "emmc_208m_sel",
-+ emmc_208m_parents, 0x020, 0x024, 0x028, 0, 3, 7,
-+ 0x1C0, 8),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EMMC_400M_SEL, "emmc_400m_sel",
-+ emmc_400m_parents, 0x020, 0x024, 0x028, 8, 2, 15,
-+ 0x1C0, 9),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_F26M_SEL, "csw_f26m_sel",
-+ csw_f26m_parents, 0x020, 0x024, 0x028, 16, 1, 23,
-+ 0x1C0, 10,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_SEL, "dramc_sel",
-+ csw_f26m_parents, 0x020, 0x024, 0x028, 24, 1,
-+ 31, 0x1C0, 11,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+ /* CLK_CFG_3 */
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
-+ dramc_md32_parents, 0x030, 0x034, 0x038, 0, 2,
-+ 7, 0x1C0, 12,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAXI_SEL, "sysaxi_sel",
-+ sysaxi_parents, 0x030, 0x034, 0x038, 8, 1, 15,
-+ 0x1C0, 13,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+ MUX_GATE_CLR_SET_UPD_FLAGS(CLK_TOP_SYSAPB_SEL, "sysapb_sel",
-+ sysapb_parents, 0x030, 0x034, 0x038, 16, 1,
-+ 23, 0x1C0, 14,
-+ CLK_IS_CRITICAL | CLK_SET_RATE_PARENT),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel",
-+ arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1, 31,
-+ 0x1C0, 15),
-+ /* CLK_CFG_4 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel",
-+ ap2cnn_host_parents, 0x040, 0x044, 0x048, 0, 1, 7,
-+ 0x1C0, 16),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents,
-+ 0x040, 0x044, 0x048, 8, 1, 15, 0x1C0, 17),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_500M_SEL, "netsys_500m_sel",
-+ netsys_500m_parents, 0x040, 0x044, 0x048, 16, 1, 23,
-+ 0x1C0, 18),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel",
-+ netsys_mcu_parents, 0x040, 0x044, 0x048, 24, 3, 31,
-+ 0x1C0, 19),
-+ /* CLK_CFG_5 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_NETSYS_2X_SEL, "netsys_2x_sel",
-+ netsys_2x_parents, 0x050, 0x054, 0x058, 0, 2, 7,
-+ 0x1C0, 20),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_325M_SEL, "sgm_325m_sel",
-+ sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
-+ 0x1C0, 21),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
-+ 0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_EIP97B_SEL, "eip97b_sel", eip97b_parents,
-+ 0x050, 0x054, 0x058, 24, 3, 31, 0x1C0, 23),
-+ /* CLK_CFG_6 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB3_PHY_SEL, "usb3_phy_sel",
-+ csw_f26m_parents, 0x060, 0x064, 0x068, 0, 1,
-+ 7, 0x1C0, 24),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_SEL, "aud_sel", aud_parents, 0x060,
-+ 0x064, 0x068, 8, 1, 15, 0x1C0, 25),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents,
-+ 0x060, 0x064, 0x068, 16, 1, 23, 0x1C0, 26),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents,
-+ 0x060, 0x064, 0x068, 24, 2, 31, 0x1C0, 27),
-+ /* CLK_CFG_7 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_A_TUNER_SEL, "a_tuner_sel",
-+ a_tuner_parents, 0x070, 0x074, 0x078, 0, 2, 7,
-+ 0x1C0, 28),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SEL, "u2u3_sel", u2u3_parents, 0x070,
-+ 0x074, 0x078, 8, 1, 15, 0x1C0, 29),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel",
-+ u2u3_sys_parents, 0x070, 0x074, 0x078, 16, 1, 23,
-+ 0x1C0, 30),
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel",
-+ u2u3_sys_parents, 0x070, 0x074, 0x078, 24, 1, 31,
-+ 0x1C4, 0),
-+ /* CLK_CFG_8 */
-+ MUX_GATE_CLR_SET_UPD(CLK_TOP_USB_FRMCNT_SEL, "usb_frmcnt_sel",
-+ usb_frmcnt_parents, 0x080, 0x084, 0x088, 0, 1, 7,
-+ 0x1C4, 1),
-+};
-+
-+static struct mtk_composite top_aud_divs[] = {
-+ DIV_GATE(CLK_TOP_AUD_I2S_M, "aud_i2s_m", "aud",
-+ 0x0420, 0, 0x0420, 8, 8),
-+};
-+
-+static const struct mtk_clk_desc topck_desc = {
-+ .factor_clks = top_divs,
-+ .num_factor_clks = ARRAY_SIZE(top_divs),
-+ .mux_clks = top_muxes,
-+ .num_mux_clks = ARRAY_SIZE(top_muxes),
-+ .composite_clks = top_aud_divs,
-+ .num_composite_clks = ARRAY_SIZE(top_aud_divs),
-+ .clk_lock = &mt7981_clk_lock,
-+};
-+
-+static const struct of_device_id of_match_clk_mt7981_topckgen[] = {
-+ { .compatible = "mediatek,mt7981-topckgen", .data = &topck_desc },
-+ { /* sentinel */ }
-+};
-+
-+static struct platform_driver clk_mt7981_topckgen_drv = {
-+ .probe = mtk_clk_simple_probe,
-+ .remove = mtk_clk_simple_remove,
-+ .driver = {
-+ .name = "clk-mt7981-topckgen",
-+ .of_match_table = of_match_clk_mt7981_topckgen,
-+ },
-+};
-+builtin_platform_driver(clk_mt7981_topckgen_drv);
+++ /dev/null
-From cc4d9e0c77494fcf6bccbc57e23db0007cf681b7 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Thu, 26 Jan 2023 03:33:46 +0000
-Subject: [PATCH] dt-bindings: clock: Add compatibles for MT7981
-
-Add compatible string for MT7981 to existing bindings at
- - mediatek,apmixedsys.yaml
- - mediatek,topckgen.yaml
- - mediatek,ethsys.txt
- - mediatek,infracfg.yaml
- - mediatek,sgmiisys.txt
-
-Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Link: https://lore.kernel.org/r/cc85ee470c781ff4013f6c21c92c0a21574b12b2.1674703830.git.daniel@makrotopia.org
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- .../devicetree/bindings/arm/mediatek/mediatek,ethsys.txt | 1 +
- .../devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml | 1 +
- .../devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt | 2 ++
- .../devicetree/bindings/clock/mediatek,apmixedsys.yaml | 1 +
- Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml | 1 +
- 5 files changed, 6 insertions(+)
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
-@@ -10,6 +10,7 @@ Required Properties:
- - "mediatek,mt7622-ethsys", "syscon"
- - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
- - "mediatek,mt7629-ethsys", "syscon"
-+ - "mediatek,mt7981-ethsys", "syscon"
- - "mediatek,mt7986-ethsys", "syscon"
- - #clock-cells: Must be 1
- - #reset-cells: Must be 1
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.yaml
-@@ -28,6 +28,7 @@ properties:
- - mediatek,mt6797-infracfg
- - mediatek,mt7622-infracfg
- - mediatek,mt7629-infracfg
-+ - mediatek,mt7981-infracfg
- - mediatek,mt7986-infracfg
- - mediatek,mt8135-infracfg
- - mediatek,mt8167-infracfg
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
-+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
-@@ -8,6 +8,8 @@ Required Properties:
- - compatible: Should be:
- - "mediatek,mt7622-sgmiisys", "syscon"
- - "mediatek,mt7629-sgmiisys", "syscon"
-+ - "mediatek,mt7981-sgmiisys_0", "syscon"
-+ - "mediatek,mt7981-sgmiisys_1", "syscon"
- - "mediatek,mt7986-sgmiisys_0", "syscon"
- - "mediatek,mt7986-sgmiisys_1", "syscon"
- - #clock-cells: Must be 1
---- a/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
-+++ b/Documentation/devicetree/bindings/clock/mediatek,apmixedsys.yaml
-@@ -20,6 +20,7 @@ properties:
- - enum:
- - mediatek,mt6797-apmixedsys
- - mediatek,mt7622-apmixedsys
-+ - mediatek,mt7981-apmixedsys
- - mediatek,mt7986-apmixedsys
- - mediatek,mt8135-apmixedsys
- - mediatek,mt8173-apmixedsys
---- a/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
-+++ b/Documentation/devicetree/bindings/clock/mediatek,topckgen.yaml
-@@ -35,6 +35,7 @@ properties:
- - mediatek,mt6779-topckgen
- - mediatek,mt6795-topckgen
- - mediatek,mt7629-topckgen
-+ - mediatek,mt7981-topckgen
- - mediatek,mt7986-topckgen
- - mediatek,mt8167-topckgen
- - mediatek,mt8183-topckgen
+++ /dev/null
-From d4f08a703565abf47baa5a77d05365cf4598d55c Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:56:52 +0000
-Subject: [PATCH 1/2] dt-bindings: arm: mediatek: sgmiisys: Convert to DT
- schema
-
-Convert mediatek,sgmiiisys bindings to DT schema format.
-Add maintainer Matthias Brugger, no maintainers were listed in the
-original documentation.
-As this node is also referenced by the Ethernet controller and used
-as SGMII PCS add this fact to the description.
-Move the file to Documentation/devicetree/bindings/net/pcs/ which seems
-more appropriate given that the great majority of registers are related
-to SGMII PCS functionality and only one register represents clock bits.
-
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- .../arm/mediatek/mediatek,sgmiisys.txt | 27 ----------
- .../bindings/net/pcs/mediatek,sgmiisys.yaml | 49 +++++++++++++++++++
- 2 files changed, 49 insertions(+), 27 deletions(-)
- delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
- create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-
---- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
-+++ /dev/null
-@@ -1,27 +0,0 @@
--MediaTek SGMIISYS controller
--============================
--
--The MediaTek SGMIISYS controller provides various clocks to the system.
--
--Required Properties:
--
--- compatible: Should be:
-- - "mediatek,mt7622-sgmiisys", "syscon"
-- - "mediatek,mt7629-sgmiisys", "syscon"
-- - "mediatek,mt7981-sgmiisys_0", "syscon"
-- - "mediatek,mt7981-sgmiisys_1", "syscon"
-- - "mediatek,mt7986-sgmiisys_0", "syscon"
-- - "mediatek,mt7986-sgmiisys_1", "syscon"
--- #clock-cells: Must be 1
--
--The SGMIISYS controller uses the common clk binding from
--Documentation/devicetree/bindings/clock/clock-bindings.txt
--The available clocks are defined in dt-bindings/clock/mt*-clk.h.
--
--Example:
--
--sgmiisys: sgmiisys@1b128000 {
-- compatible = "mediatek,mt7622-sgmiisys", "syscon";
-- reg = <0 0x1b128000 0 0x1000>;
-- #clock-cells = <1>;
--};
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-@@ -0,0 +1,49 @@
-+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/pcs/mediatek,sgmiisys.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek SGMIISYS Controller
-+
-+maintainers:
-+ - Matthias Brugger <matthias.bgg@gmail.com>
-+
-+description:
-+ The MediaTek SGMIISYS controller provides a SGMII PCS and some clocks
-+ to the ethernet subsystem to which it is attached.
-+
-+properties:
-+ compatible:
-+ items:
-+ - enum:
-+ - mediatek,mt7622-sgmiisys
-+ - mediatek,mt7629-sgmiisys
-+ - mediatek,mt7986-sgmiisys_0
-+ - mediatek,mt7986-sgmiisys_1
-+ - const: syscon
-+
-+ reg:
-+ maxItems: 1
-+
-+ '#clock-cells':
-+ const: 1
-+
-+required:
-+ - compatible
-+ - reg
-+ - '#clock-cells'
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ soc {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ sgmiisys: syscon@1b128000 {
-+ compatible = "mediatek,mt7622-sgmiisys", "syscon";
-+ reg = <0 0x1b128000 0 0x1000>;
-+ #clock-cells = <1>;
-+ };
-+ };
+++ /dev/null
-From 4f7eb19c4f44078100659f6ba073b0cc7191bc91 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 19 Mar 2023 12:57:04 +0000
-Subject: [PATCH 2/2] dt-bindings: net: pcs: mediatek,sgmiisys: add MT7981 SoC
-
-Add mediatek,pnswap boolean property needed on many boards using the
-MediaTek MT7981 SoC.
-
-Reviewed-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- .../devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-+++ b/Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
-@@ -19,6 +19,8 @@ properties:
- - enum:
- - mediatek,mt7622-sgmiisys
- - mediatek,mt7629-sgmiisys
-+ - mediatek,mt7981-sgmiisys_0
-+ - mediatek,mt7981-sgmiisys_1
- - mediatek,mt7986-sgmiisys_0
- - mediatek,mt7986-sgmiisys_1
- - const: syscon
-@@ -29,6 +31,10 @@ properties:
- '#clock-cells':
- const: 1
-
-+ mediatek,pnswap:
-+ description: Invert polarity of the SGMII data lanes
-+ type: boolean
-+
- required:
- - compatible
- - reg
+++ /dev/null
-From 24e961b93d292d0dd6380213d22a071a99ea787d Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Tue, 25 Oct 2022 15:29:53 +0200
-Subject: [PATCH 1/6] mmc: mediatek: add support for MT7986 SoC
-
-Adding mt7986 own characteristics and of_device_id to have support
-of MT7986 SoC.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221025132953.81286-7-linux@fw-web.de
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -552,6 +552,19 @@ static const struct mtk_mmc_compatible m
- .support_64g = false,
- };
-
-+static const struct mtk_mmc_compatible mt7986_compat = {
-+ .clk_div_bits = 12,
-+ .recheck_sdio_irq = true,
-+ .hs400_tune = false,
-+ .pad_tune_reg = MSDC_PAD_TUNE0,
-+ .async_fifo = true,
-+ .data_tune = true,
-+ .busy_check = true,
-+ .stop_clk_fix = true,
-+ .enhance_rx = true,
-+ .support_64g = true,
-+};
-+
- static const struct mtk_mmc_compatible mt8135_compat = {
- .clk_div_bits = 8,
- .recheck_sdio_irq = true,
-@@ -609,6 +622,7 @@ static const struct of_device_id msdc_of
- { .compatible = "mediatek,mt6795-mmc", .data = &mt6795_compat},
- { .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
- { .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
-+ { .compatible = "mediatek,mt7986-mmc", .data = &mt7986_compat},
- { .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
- { .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
- { .compatible = "mediatek,mt8183-mmc", .data = &mt8183_compat},
+++ /dev/null
-From 7b438d0377fbd520b475a68bdd9de1692393f22d Mon Sep 17 00:00:00 2001
-From: Mengqi Zhang <mengqi.zhang@mediatek.com>
-Date: Sun, 6 Nov 2022 11:39:24 +0800
-Subject: [PATCH 2/6] mmc: mtk-sd: add Inline Crypto Engine clock control
-
-Add crypto clock control and ungate it before CQHCI init.
-
-Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106033924.9854-2-mengqi.zhang@mediatek.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -452,6 +452,7 @@ struct msdc_host {
- struct clk *bus_clk; /* bus clock which used to access register */
- struct clk *src_clk_cg; /* msdc source clock control gate */
- struct clk *sys_clk_cg; /* msdc subsys clock control gate */
-+ struct clk *crypto_clk; /* msdc crypto clock control gate */
- struct clk_bulk_data bulk_clks[MSDC_NR_CLOCKS];
- u32 mclk; /* mmc subsystem clock frequency */
- u32 src_clk_freq; /* source clock frequency */
-@@ -840,6 +841,7 @@ static void msdc_set_busy_timeout(struct
- static void msdc_gate_clock(struct msdc_host *host)
- {
- clk_bulk_disable_unprepare(MSDC_NR_CLOCKS, host->bulk_clks);
-+ clk_disable_unprepare(host->crypto_clk);
- clk_disable_unprepare(host->src_clk_cg);
- clk_disable_unprepare(host->src_clk);
- clk_disable_unprepare(host->bus_clk);
-@@ -855,6 +857,7 @@ static int msdc_ungate_clock(struct msdc
- clk_prepare_enable(host->bus_clk);
- clk_prepare_enable(host->src_clk);
- clk_prepare_enable(host->src_clk_cg);
-+ clk_prepare_enable(host->crypto_clk);
- ret = clk_bulk_prepare_enable(MSDC_NR_CLOCKS, host->bulk_clks);
- if (ret) {
- dev_err(host->dev, "Cannot enable pclk/axi/ahb clock gates\n");
-@@ -2670,6 +2673,15 @@ static int msdc_drv_probe(struct platfor
- goto host_free;
- }
-
-+ /* only eMMC has crypto property */
-+ if (!(mmc->caps2 & MMC_CAP2_NO_MMC)) {
-+ host->crypto_clk = devm_clk_get_optional(&pdev->dev, "crypto");
-+ if (IS_ERR(host->crypto_clk))
-+ host->crypto_clk = NULL;
-+ else
-+ mmc->caps2 |= MMC_CAP2_CRYPTO;
-+ }
-+
- host->irq = platform_get_irq(pdev, 0);
- if (host->irq < 0) {
- ret = host->irq;
+++ /dev/null
-From 4b323f02b6e8df1b04292635ef829e7f723bf50e Mon Sep 17 00:00:00 2001
-From: Yu Zhe <yuzhe@nfschina.com>
-Date: Thu, 10 Nov 2022 15:28:19 +0800
-Subject: [PATCH 3/6] mmc: mtk-sd: fix two spelling mistakes in comment
-
-spelling mistake fix : "alreay" -> "already"
- "checksume" -> "checksum"
-
-Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221110072819.11530-1-yuzhe@nfschina.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -750,7 +750,7 @@ static inline void msdc_dma_setup(struct
- else
- bd[j].bd_info &= ~BDMA_DESC_EOL;
-
-- /* checksume need to clear first */
-+ /* checksum need to clear first */
- bd[j].bd_info &= ~BDMA_DESC_CHECKSUM;
- bd[j].bd_info |= msdc_dma_calcs((u8 *)(&bd[j]), 16) << 8;
- }
-@@ -1229,7 +1229,7 @@ static bool msdc_cmd_done(struct msdc_ho
- !host->hs400_tuning))
- /*
- * should not clear fifo/interrupt as the tune data
-- * may have alreay come when cmd19/cmd21 gets response
-+ * may have already come when cmd19/cmd21 gets response
- * CRC error.
- */
- msdc_reset_hw(host);
+++ /dev/null
-From b98e7e8daf0ebab9dcc36812378a71e1be0b5089 Mon Sep 17 00:00:00 2001
-From: ChanWoo Lee <cw9316.lee@samsung.com>
-Date: Thu, 24 Nov 2022 17:00:31 +0900
-Subject: [PATCH 4/6] mmc: Avoid open coding by using mmc_op_tuning()
-
-Replace code with the already defined function. No functional changes.
-
-Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
-Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
-Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/mtk-sd.c | 8 ++------
- 1 file changed, 2 insertions(+), 6 deletions(-)
-
---- a/drivers/mmc/host/mtk-sd.c
-+++ b/drivers/mmc/host/mtk-sd.c
-@@ -1224,9 +1224,7 @@ static bool msdc_cmd_done(struct msdc_ho
-
- if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
- if (events & MSDC_INT_CMDTMO ||
-- (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
-- cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
-- !host->hs400_tuning))
-+ (!mmc_op_tuning(cmd->opcode) && !host->hs400_tuning))
- /*
- * should not clear fifo/interrupt as the tune data
- * may have already come when cmd19/cmd21 gets response
-@@ -1320,9 +1318,7 @@ static void msdc_cmd_next(struct msdc_ho
- {
- if ((cmd->error &&
- !(cmd->error == -EILSEQ &&
-- (cmd->opcode == MMC_SEND_TUNING_BLOCK ||
-- cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200 ||
-- host->hs400_tuning))) ||
-+ (mmc_op_tuning(cmd->opcode) || host->hs400_tuning))) ||
- (mrq->sbc && mrq->sbc->error))
- msdc_request_done(host, mrq);
- else if (cmd == mrq->sbc)
+++ /dev/null
-From f1da27b7c4191f78ed81d3dabf64c769f896296c Mon Sep 17 00:00:00 2001
-From: "Mingming.Su" <Mingming.Su@mediatek.com>
-Date: Sat, 8 Oct 2022 18:45:53 +0200
-Subject: [PATCH] hwrng: mtk - add mt7986 support
-
-1. Add trng compatible name for MT7986
-2. Fix mtk_rng_wait_ready() function
-
-Signed-off-by: Mingming.Su <Mingming.Su@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/char/hw_random/mtk-rng.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/char/hw_random/mtk-rng.c
-+++ b/drivers/char/hw_random/mtk-rng.c
-@@ -22,7 +22,7 @@
- #define RNG_AUTOSUSPEND_TIMEOUT 100
-
- #define USEC_POLL 2
--#define TIMEOUT_POLL 20
-+#define TIMEOUT_POLL 60
-
- #define RNG_CTRL 0x00
- #define RNG_EN BIT(0)
-@@ -77,7 +77,7 @@ static bool mtk_rng_wait_ready(struct hw
- readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
- ready & RNG_READY, USEC_POLL,
- TIMEOUT_POLL);
-- return !!ready;
-+ return !!(ready & RNG_READY);
- }
-
- static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
-@@ -179,6 +179,7 @@ static const struct dev_pm_ops mtk_rng_p
- #endif /* CONFIG_PM */
-
- static const struct of_device_id mtk_rng_match[] = {
-+ { .compatible = "mediatek,mt7986-rng" },
- { .compatible = "mediatek,mt7623-rng" },
- {},
- };
+++ /dev/null
-From 98c485eaf509bc0e2a85f9b58d17cd501f274c4e Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Sun, 11 Jun 2023 00:48:10 +0100
-Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs
-
-Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet
-PHYs which require calibration data from the SoC's efuse.
-Despite the similar design the driver doesn't share any code with the
-existing mediatek-ge.c.
-Add support for such PHYs by introducing a new driver with basic
-support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- MAINTAINERS | 9 +
- drivers/net/phy/Kconfig | 12 +
- drivers/net/phy/Makefile | 1 +
- drivers/net/phy/mediatek-ge-soc.c | 1116 +++++++++++++++++++++++++++++
- drivers/net/phy/mediatek-ge.c | 3 +-
- 5 files changed, 1140 insertions(+), 1 deletion(-)
- create mode 100644 drivers/net/phy/mediatek-ge-soc.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -12938,6 +12938,15 @@ F: drivers/net/pcs/pcs-mtk-usxgmii.c
- F: include/linux/pcs/pcs-mtk-lynxi.h
- F: include/linux/pcs/pcs-mtk-usxgmii.h
-
-+MEDIATEK ETHERNET PHY DRIVERS
-+M: Daniel Golle <daniel@makrotopia.org>
-+M: Qingfang Deng <dqfext@gmail.com>
-+M: SkyLake Huang <SkyLake.Huang@mediatek.com>
-+L: netdev@vger.kernel.org
-+S: Maintained
-+F: drivers/net/phy/mediatek-ge-soc.c
-+F: drivers/net/phy/mediatek-ge.c
-+
- MEDIATEK I2C CONTROLLER DRIVER
- M: Qii Wang <qii.wang@mediatek.com>
- L: linux-i2c@vger.kernel.org
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -314,6 +314,18 @@ config MEDIATEK_GE_PHY
- help
- Supports the MediaTek Gigabit Ethernet PHYs.
-
-+config MEDIATEK_GE_SOC_PHY
-+ tristate "MediaTek SoC Ethernet PHYs"
-+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
-+ select NVMEM_MTK_EFUSE
-+ help
-+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-+
-+ Include support for built-in Ethernet PHYs which are present in
-+ the MT7981 and MT7988 SoCs. These PHYs need calibration data
-+ present in the SoCs efuse and will dynamically calibrate VCM
-+ (common-mode voltage) during startup.
-+
- config MICREL_PHY
- tristate "Micrel PHYs"
- depends on PTP_1588_CLOCK_OPTIONAL
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
- obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
- obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
- obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
-+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
- obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
- obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
- obj-$(CONFIG_MICREL_PHY) += micrel.o
---- /dev/null
-+++ b/drivers/net/phy/mediatek-ge-soc.c
-@@ -0,0 +1,1116 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+#include <linux/bitfield.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of_address.h>
-+#include <linux/of_platform.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/phy.h>
-+
-+#define MTK_GPHY_ID_MT7981 0x03a29461
-+#define MTK_GPHY_ID_MT7988 0x03a29481
-+
-+#define MTK_EXT_PAGE_ACCESS 0x1f
-+#define MTK_PHY_PAGE_STANDARD 0x0000
-+#define MTK_PHY_PAGE_EXTENDED_3 0x0003
-+
-+#define MTK_PHY_LPI_REG_14 0x14
-+#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
-+
-+#define MTK_PHY_LPI_REG_1c 0x1c
-+#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
-+
-+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
-+
-+#define ANALOG_INTERNAL_OPERATION_MAX_US 20
-+#define TXRESERVE_MIN 0
-+#define TXRESERVE_MAX 7
-+
-+#define MTK_PHY_ANARG_RG 0x10
-+#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8)
-+
-+/* Registers on MDIO_MMD_VEND1 */
-+#define MTK_PHY_TXVLD_DA_RG 0x12
-+#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10)
-+#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16
-+#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10)
-+#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17
-+#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8)
-+#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18
-+#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8)
-+#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19
-+#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8)
-+#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20
-+#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8)
-+#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21
-+#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8)
-+#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22
-+#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8)
-+#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0)
-+
-+#define MTK_PHY_RXADC_CTRL_RG7 0xc6
-+#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
-+
-+#define MTK_PHY_RXADC_CTRL_RG9 0xc8
-+#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12)
-+#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8)
-+#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4)
-+#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0)
-+
-+#define MTK_PHY_LDO_OUTPUT_V 0xd7
-+
-+#define MTK_PHY_RG_ANA_CAL_RG0 0xdb
-+#define MTK_PHY_RG_CAL_CKINV BIT(12)
-+#define MTK_PHY_RG_ANA_CALEN BIT(8)
-+#define MTK_PHY_RG_ZCALEN_A BIT(0)
-+
-+#define MTK_PHY_RG_ANA_CAL_RG1 0xdc
-+#define MTK_PHY_RG_ZCALEN_B BIT(12)
-+#define MTK_PHY_RG_ZCALEN_C BIT(8)
-+#define MTK_PHY_RG_ZCALEN_D BIT(4)
-+#define MTK_PHY_RG_TXVOS_CALEN BIT(0)
-+
-+#define MTK_PHY_RG_ANA_CAL_RG5 0xe0
-+#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8)
-+
-+#define MTK_PHY_RG_TX_FILTER 0xfe
-+
-+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120
-+#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8)
-+#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0)
-+
-+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122
-+#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0)
-+
-+#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144
-+#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5)
-+
-+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172
-+#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8)
-+#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0)
-+
-+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173
-+#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8)
-+#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0)
-+
-+#define MTK_PHY_RG_AD_CAL_COMP 0x17a
-+#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8)
-+
-+#define MTK_PHY_RG_AD_CAL_CLK 0x17b
-+#define MTK_PHY_DA_CAL_CLK BIT(0)
-+
-+#define MTK_PHY_RG_AD_CALIN 0x17c
-+#define MTK_PHY_DA_CALIN_FLAG BIT(0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d
-+#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e
-+#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f
-+#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180
-+#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181
-+#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182
-+#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183
-+#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184
-+#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0)
-+
-+#define MTK_PHY_RG_DEV1E_REG19b 0x19b
-+#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8)
-+
-+#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a
-+#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b
-+#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c
-+#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d
-+#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e
-+#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f
-+#define MTK_PHY_RG_LP_IIR2_K4_L 0x230
-+#define MTK_PHY_RG_LP_IIR2_K4_U 0x231
-+#define MTK_PHY_RG_LP_IIR2_K5_L 0x232
-+#define MTK_PHY_RG_LP_IIR2_K5_U 0x233
-+
-+#define MTK_PHY_RG_DEV1E_REG234 0x234
-+#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0)
-+#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4)
-+#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12)
-+
-+#define MTK_PHY_RG_LPF_CNT_VAL 0x235
-+
-+#define MTK_PHY_RG_DEV1E_REG238 0x238
-+#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0)
-+#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12)
-+
-+#define MTK_PHY_RG_DEV1E_REG239 0x239
-+#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0)
-+#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12)
-+
-+#define MTK_PHY_RG_DEV1E_REG27C 0x27c
-+#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8)
-+#define MTK_PHY_RG_DEV1E_REG27D 0x27d
-+#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0)
-+
-+#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7
-+#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0)
-+#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8)
-+
-+#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1
-+#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0)
-+#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8)
-+#define MTK_PHY_LPI_TR_READY BIT(9)
-+#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10)
-+
-+#define MTK_PHY_RG_DEV1E_REG323 0x323
-+#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0)
-+#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4)
-+
-+#define MTK_PHY_RG_DEV1E_REG324 0x324
-+#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0)
-+#define MTK_PHY_SMI_DET_MAX_EN BIT(8)
-+
-+#define MTK_PHY_RG_DEV1E_REG326 0x326
-+#define MTK_PHY_LPI_MODE_SD_ON BIT(0)
-+#define MTK_PHY_RESET_RANDUPD_CNT BIT(1)
-+#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2)
-+#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4)
-+#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5)
-+
-+#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502
-+#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503
-+
-+#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d
-+#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e
-+#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
-+#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
-+
-+#define MTK_PHY_RG_BG_RASEL 0x115
-+#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
-+
-+/* These macro privides efuse parsing for internal phy. */
-+#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
-+#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
-+#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0))
-+#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0))
-+#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0))
-+
-+#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0))
-+#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0))
-+#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0))
-+#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0))
-+#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0))
-+
-+#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0))
-+#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0))
-+
-+#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0))
-+#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0))
-+
-+enum {
-+ NO_PAIR,
-+ PAIR_A,
-+ PAIR_B,
-+ PAIR_C,
-+ PAIR_D,
-+};
-+
-+enum {
-+ GPHY_PORT0,
-+ GPHY_PORT1,
-+ GPHY_PORT2,
-+ GPHY_PORT3,
-+};
-+
-+enum calibration_mode {
-+ EFUSE_K,
-+ SW_K
-+};
-+
-+enum CAL_ITEM {
-+ REXT,
-+ TX_OFFSET,
-+ TX_AMP,
-+ TX_R50,
-+ TX_VCM
-+};
-+
-+enum CAL_MODE {
-+ EFUSE_M,
-+ SW_M
-+};
-+
-+static int mtk_socphy_read_page(struct phy_device *phydev)
-+{
-+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-+}
-+
-+static int mtk_socphy_write_page(struct phy_device *phydev, int page)
-+{
-+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-+}
-+
-+/* One calibration cycle consists of:
-+ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
-+ * until AD_CAL_COMP is ready to output calibration result.
-+ * 2.Wait until DA_CAL_CLK is available.
-+ * 3.Fetch AD_CAL_COMP_OUT.
-+ */
-+static int cal_cycle(struct phy_device *phydev, int devad,
-+ u32 regnum, u16 mask, u16 cal_val)
-+{
-+ int reg_val;
-+ int ret;
-+
-+ phy_modify_mmd(phydev, devad, regnum,
-+ mask, cal_val);
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
-+ MTK_PHY_DA_CALIN_FLAG);
-+
-+ ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_AD_CAL_CLK, reg_val,
-+ reg_val & MTK_PHY_DA_CAL_CLK, 500,
-+ ANALOG_INTERNAL_OPERATION_MAX_US, false);
-+ if (ret) {
-+ phydev_err(phydev, "Calibration cycle timeout\n");
-+ return ret;
-+ }
-+
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
-+ MTK_PHY_DA_CALIN_FLAG);
-+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
-+ MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
-+ phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
-+
-+ return ret;
-+}
-+
-+static int rext_fill_result(struct phy_device *phydev, u16 *buf)
-+{
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
-+ MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
-+ MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
-+
-+ return 0;
-+}
-+
-+static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
-+{
-+ u16 rext_cal_val[2];
-+
-+ rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
-+ rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
-+ rext_fill_result(phydev, rext_cal_val);
-+
-+ return 0;
-+}
-+
-+static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
-+{
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
-+ MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
-+ MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
-+ MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
-+ MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
-+
-+ return 0;
-+}
-+
-+static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
-+{
-+ u16 tx_offset_cal_val[4];
-+
-+ tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
-+ tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
-+ tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
-+ tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
-+
-+ tx_offset_fill_result(phydev, tx_offset_cal_val);
-+
-+ return 0;
-+}
-+
-+static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
-+{
-+ int i;
-+ int bias[16] = {};
-+ const int vals_9461[16] = { 7, 1, 4, 7,
-+ 7, 1, 4, 7,
-+ 7, 1, 4, 7,
-+ 7, 1, 4, 7 };
-+ const int vals_9481[16] = { 10, 6, 6, 10,
-+ 10, 6, 6, 10,
-+ 10, 6, 6, 10,
-+ 10, 6, 6, 10 };
-+ switch (phydev->drv->phy_id) {
-+ case MTK_GPHY_ID_MT7981:
-+ /* We add some calibration to efuse values
-+ * due to board level influence.
-+ * GBE: +7, TBT: +1, HBT: +4, TST: +7
-+ */
-+ memcpy(bias, (const void *)vals_9461, sizeof(bias));
-+ break;
-+ case MTK_GPHY_ID_MT7988:
-+ memcpy(bias, (const void *)vals_9481, sizeof(bias));
-+ break;
-+ }
-+
-+ /* Prevent overflow */
-+ for (i = 0; i < 12; i++) {
-+ if (buf[i >> 2] + bias[i] > 63) {
-+ buf[i >> 2] = 63;
-+ bias[i] = 0;
-+ }
-+ }
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
-+ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
-+ MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
-+ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
-+ MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
-+ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
-+ MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
-+ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
-+ MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
-+ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
-+ MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
-+ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
-+ MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
-+ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
-+ MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
-+ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
-+ MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
-+
-+ return 0;
-+}
-+
-+static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
-+{
-+ u16 tx_amp_cal_val[4];
-+
-+ tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
-+ tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
-+ tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
-+ tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
-+ tx_amp_fill_result(phydev, tx_amp_cal_val);
-+
-+ return 0;
-+}
-+
-+static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
-+ u8 txg_calen_x)
-+{
-+ int bias = 0;
-+ u16 reg, val;
-+
-+ if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
-+ bias = -2;
-+
-+ val = clamp_val(bias + tx_r50_cal_val, 0, 63);
-+
-+ switch (txg_calen_x) {
-+ case PAIR_A:
-+ reg = MTK_PHY_DA_TX_R50_PAIR_A;
-+ break;
-+ case PAIR_B:
-+ reg = MTK_PHY_DA_TX_R50_PAIR_B;
-+ break;
-+ case PAIR_C:
-+ reg = MTK_PHY_DA_TX_R50_PAIR_C;
-+ break;
-+ case PAIR_D:
-+ reg = MTK_PHY_DA_TX_R50_PAIR_D;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
-+
-+ return 0;
-+}
-+
-+static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
-+ u8 txg_calen_x)
-+{
-+ u16 tx_r50_cal_val;
-+
-+ switch (txg_calen_x) {
-+ case PAIR_A:
-+ tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
-+ break;
-+ case PAIR_B:
-+ tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
-+ break;
-+ case PAIR_C:
-+ tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
-+ break;
-+ case PAIR_D:
-+ tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
-+
-+ return 0;
-+}
-+
-+static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
-+{
-+ u8 lower_idx, upper_idx, txreserve_val;
-+ u8 lower_ret, upper_ret;
-+ int ret;
-+
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+ MTK_PHY_RG_ANA_CALEN);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+ MTK_PHY_RG_CAL_CKINV);
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
-+ MTK_PHY_RG_TXVOS_CALEN);
-+
-+ switch (rg_txreserve_x) {
-+ case PAIR_A:
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN0_A,
-+ MTK_PHY_DASN_DAC_IN0_A_MASK);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN1_A,
-+ MTK_PHY_DASN_DAC_IN1_A_MASK);
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_ANA_CAL_RG0,
-+ MTK_PHY_RG_ZCALEN_A);
-+ break;
-+ case PAIR_B:
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN0_B,
-+ MTK_PHY_DASN_DAC_IN0_B_MASK);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN1_B,
-+ MTK_PHY_DASN_DAC_IN1_B_MASK);
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_ANA_CAL_RG1,
-+ MTK_PHY_RG_ZCALEN_B);
-+ break;
-+ case PAIR_C:
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN0_C,
-+ MTK_PHY_DASN_DAC_IN0_C_MASK);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN1_C,
-+ MTK_PHY_DASN_DAC_IN1_C_MASK);
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_ANA_CAL_RG1,
-+ MTK_PHY_RG_ZCALEN_C);
-+ break;
-+ case PAIR_D:
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN0_D,
-+ MTK_PHY_DASN_DAC_IN0_D_MASK);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DASN_DAC_IN1_D,
-+ MTK_PHY_DASN_DAC_IN1_D_MASK);
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_ANA_CAL_RG1,
-+ MTK_PHY_RG_ZCALEN_D);
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ goto restore;
-+ }
-+
-+ lower_idx = TXRESERVE_MIN;
-+ upper_idx = TXRESERVE_MAX;
-+
-+ phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
-+ while ((upper_idx - lower_idx) > 1) {
-+ txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
-+ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
-+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+ MTK_PHY_DA_RX_PSBN_LP_MASK,
-+ txreserve_val << 12 | txreserve_val << 8 |
-+ txreserve_val << 4 | txreserve_val);
-+ if (ret == 1) {
-+ upper_idx = txreserve_val;
-+ upper_ret = ret;
-+ } else if (ret == 0) {
-+ lower_idx = txreserve_val;
-+ lower_ret = ret;
-+ } else {
-+ goto restore;
-+ }
-+ }
-+
-+ if (lower_idx == TXRESERVE_MIN) {
-+ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RXADC_CTRL_RG9,
-+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+ MTK_PHY_DA_RX_PSBN_LP_MASK,
-+ lower_idx << 12 | lower_idx << 8 |
-+ lower_idx << 4 | lower_idx);
-+ ret = lower_ret;
-+ } else if (upper_idx == TXRESERVE_MAX) {
-+ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RXADC_CTRL_RG9,
-+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+ MTK_PHY_DA_RX_PSBN_LP_MASK,
-+ upper_idx << 12 | upper_idx << 8 |
-+ upper_idx << 4 | upper_idx);
-+ ret = upper_ret;
-+ }
-+ if (ret < 0)
-+ goto restore;
-+
-+ /* We calibrate TX-VCM in different logic. Check upper index and then
-+ * lower index. If this calibration is valid, apply lower index's result.
-+ */
-+ ret = upper_ret - lower_ret;
-+ if (ret == 1) {
-+ ret = 0;
-+ /* Make sure we use upper_idx in our calibration system */
-+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
-+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+ MTK_PHY_DA_RX_PSBN_LP_MASK,
-+ upper_idx << 12 | upper_idx << 8 |
-+ upper_idx << 4 | upper_idx);
-+ phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
-+ } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
-+ lower_ret == 1) {
-+ ret = 0;
-+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
-+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
-+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
-+ MTK_PHY_DA_RX_PSBN_LP_MASK,
-+ lower_idx << 12 | lower_idx << 8 |
-+ lower_idx << 4 | lower_idx);
-+ phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
-+ lower_idx);
-+ } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
-+ lower_ret == 0) {
-+ ret = 0;
-+ phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
-+ upper_idx);
-+ } else {
-+ ret = -EINVAL;
-+ }
-+
-+restore:
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+ MTK_PHY_RG_ANA_CALEN);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
-+ MTK_PHY_RG_TXVOS_CALEN);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
-+ MTK_PHY_RG_ZCALEN_A);
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
-+ MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
-+ MTK_PHY_RG_ZCALEN_D);
-+
-+ return ret;
-+}
-+
-+static void mt798x_phy_common_finetune(struct phy_device *phydev)
-+{
-+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+ /* EnabRandUpdTrig = 1 */
-+ __phy_write(phydev, 0x11, 0x2f00);
-+ __phy_write(phydev, 0x12, 0xe);
-+ __phy_write(phydev, 0x10, 0x8fb0);
-+
-+ /* NormMseLoThresh = 85 */
-+ __phy_write(phydev, 0x11, 0x55a0);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x83aa);
-+
-+ /* TrFreeze = 0 */
-+ __phy_write(phydev, 0x11, 0x0);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x9686);
-+
-+ /* SSTrKp1000Slv = 5 */
-+ __phy_write(phydev, 0x11, 0xbaef);
-+ __phy_write(phydev, 0x12, 0x2e);
-+ __phy_write(phydev, 0x10, 0x968c);
-+
-+ /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
-+ * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
-+ */
-+ __phy_write(phydev, 0x11, 0xd10a);
-+ __phy_write(phydev, 0x12, 0x34);
-+ __phy_write(phydev, 0x10, 0x8f82);
-+
-+ /* VcoSlicerThreshBitsHigh */
-+ __phy_write(phydev, 0x11, 0x5555);
-+ __phy_write(phydev, 0x12, 0x55);
-+ __phy_write(phydev, 0x10, 0x8ec0);
-+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
-+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
-+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
-+
-+ /* rg_tr_lpf_cnt_val = 512 */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
-+
-+ /* IIR2 related */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
-+
-+ /* FFE peaking */
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
-+ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
-+ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
-+
-+ /* Disable LDO pump */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
-+ /* Adjust LDO output voltage */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
-+}
-+
-+static void mt7981_phy_finetune(struct phy_device *phydev)
-+{
-+ u16 val[8] = { 0x01ce, 0x01c1,
-+ 0x020f, 0x0202,
-+ 0x03d0, 0x03c0,
-+ 0x0013, 0x0005 };
-+ int i, k;
-+
-+ /* 100M eye finetune:
-+ * Keep middle level of TX MLT3 shapper as default.
-+ * Only change TX MLT3 overshoot level here.
-+ */
-+ for (k = 0, i = 1; i < 12; i++) {
-+ if (i % 3 == 0)
-+ continue;
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
-+ }
-+
-+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
-+ __phy_write(phydev, 0x11, 0xc71);
-+ __phy_write(phydev, 0x12, 0xc);
-+ __phy_write(phydev, 0x10, 0x8fae);
-+
-+ /* ResetSyncOffset = 6 */
-+ __phy_write(phydev, 0x11, 0x600);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x8fc0);
-+
-+ /* VgaDecRate = 1 */
-+ __phy_write(phydev, 0x11, 0x4c2a);
-+ __phy_write(phydev, 0x12, 0x3e);
-+ __phy_write(phydev, 0x10, 0x8fa4);
-+
-+ /* FfeUpdGainForce = 4 */
-+ __phy_write(phydev, 0x11, 0x240);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x9680);
-+
-+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+}
-+
-+static void mt7988_phy_finetune(struct phy_device *phydev)
-+{
-+ u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
-+ 0x020d, 0x0206, 0x0384, 0x03d0,
-+ 0x03c6, 0x030a, 0x0011, 0x0005 };
-+ int i;
-+
-+ /* Set default MLT3 shaper first */
-+ for (i = 0; i < 12; i++)
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
-+
-+ /* TCT finetune */
-+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
-+
-+ /* Disable TX power saving */
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
-+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
-+
-+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+
-+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */
-+ __phy_write(phydev, 0x11, 0x671);
-+ __phy_write(phydev, 0x12, 0xc);
-+ __phy_write(phydev, 0x10, 0x8fae);
-+
-+ /* ResetSyncOffset = 5 */
-+ __phy_write(phydev, 0x11, 0x500);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x8fc0);
-+
-+ /* VgaDecRate is 1 at default on mt7988 */
-+
-+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30);
-+ /* TxClkOffset = 2 */
-+ __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK,
-+ FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2));
-+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+}
-+
-+static void mt798x_phy_eee(struct phy_device *phydev)
-+{
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
-+ MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
-+ MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
-+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
-+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
-+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
-+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
-+ 0xff));
-+
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_TESTMUX_ADC_CTRL,
-+ MTK_PHY_RG_TXEN_DIG_MASK);
-+
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
-+
-+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
-+ MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
-+ MTK_PHY_LPI_SLV_SEND_TX_EN,
-+ FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
-+ MTK_PHY_LPI_SEND_LOC_TIMER_MASK |
-+ MTK_PHY_LPI_TXPCS_LOC_RCV,
-+ FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117));
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
-+ MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
-+ FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
-+ FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
-+ MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
-+ FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
-+ 0x33) |
-+ MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
-+ MTK_PHY_LPI_VCO_EEE_STG0_EN);
-+
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
-+ MTK_PHY_EEE_WAKE_MAS_INT_DC |
-+ MTK_PHY_EEE_WAKE_SLV_INT_DC);
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
-+ MTK_PHY_SMI_DETCNT_MAX_MASK,
-+ FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
-+ MTK_PHY_SMI_DET_MAX_EN);
-+
-+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
-+ MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
-+ MTK_PHY_TREC_UPDATE_ENAB_CLR |
-+ MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
-+ MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
-+
-+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
-+ /* Regsigdet_sel_1000 = 0 */
-+ __phy_write(phydev, 0x11, 0xb);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x9690);
-+
-+ /* REG_EEE_st2TrKf1000 = 3 */
-+ __phy_write(phydev, 0x11, 0x114f);
-+ __phy_write(phydev, 0x12, 0x2);
-+ __phy_write(phydev, 0x10, 0x969a);
-+
-+ /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
-+ __phy_write(phydev, 0x11, 0x3028);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x969e);
-+
-+ /* RegEEE_slv_wake_int_timer_tar = 8 */
-+ __phy_write(phydev, 0x11, 0x5010);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x96a0);
-+
-+ /* RegEEE_trfreeze_timer2 = 586 */
-+ __phy_write(phydev, 0x11, 0x24a);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x96a8);
-+
-+ /* RegEEE100Stg1_tar = 16 */
-+ __phy_write(phydev, 0x11, 0x3210);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x96b8);
-+
-+ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */
-+ __phy_write(phydev, 0x11, 0x1463);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x96ca);
-+
-+ /* DfeTailEnableVgaThresh1000 = 27 */
-+ __phy_write(phydev, 0x11, 0x36);
-+ __phy_write(phydev, 0x12, 0x0);
-+ __phy_write(phydev, 0x10, 0x8f80);
-+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
-+ __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
-+ FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
-+
-+ __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
-+ FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
-+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-+
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
-+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
-+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
-+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
-+}
-+
-+static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
-+ u8 start_pair, u8 end_pair)
-+{
-+ u8 pair_n;
-+ int ret;
-+
-+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
-+ /* TX_OFFSET & TX_AMP have no SW calibration. */
-+ switch (cal_item) {
-+ case TX_VCM:
-+ ret = tx_vcm_cal_sw(phydev, pair_n);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ if (ret)
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
-+ u8 start_pair, u8 end_pair, u32 *buf)
-+{
-+ u8 pair_n;
-+ int ret;
-+
-+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
-+ /* TX_VCM has no efuse calibration. */
-+ switch (cal_item) {
-+ case REXT:
-+ ret = rext_cal_efuse(phydev, buf);
-+ break;
-+ case TX_OFFSET:
-+ ret = tx_offset_cal_efuse(phydev, buf);
-+ break;
-+ case TX_AMP:
-+ ret = tx_amp_cal_efuse(phydev, buf);
-+ break;
-+ case TX_R50:
-+ ret = tx_r50_cal_efuse(phydev, buf, pair_n);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
-+ enum CAL_MODE cal_mode, u8 start_pair,
-+ u8 end_pair, u32 *buf)
-+{
-+ int ret;
-+
-+ switch (cal_mode) {
-+ case EFUSE_M:
-+ ret = cal_efuse(phydev, cal_item, start_pair,
-+ end_pair, buf);
-+ break;
-+ case SW_M:
-+ ret = cal_sw(phydev, cal_item, start_pair, end_pair);
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (ret) {
-+ phydev_err(phydev, "cal %d failed\n", cal_item);
-+ return -EIO;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mt798x_phy_calibration(struct phy_device *phydev)
-+{
-+ int ret = 0;
-+ u32 *buf;
-+ size_t len;
-+ struct nvmem_cell *cell;
-+
-+ cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
-+ if (IS_ERR(cell)) {
-+ if (PTR_ERR(cell) == -EPROBE_DEFER)
-+ return PTR_ERR(cell);
-+ return 0;
-+ }
-+
-+ buf = (u32 *)nvmem_cell_read(cell, &len);
-+ if (IS_ERR(buf))
-+ return PTR_ERR(buf);
-+ nvmem_cell_put(cell);
-+
-+ if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
-+ phydev_err(phydev, "invalid efuse data\n");
-+ ret = -EINVAL;
-+ goto out;
-+ }
-+
-+ ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
-+ if (ret)
-+ goto out;
-+ ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
-+ if (ret)
-+ goto out;
-+ ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
-+ if (ret)
-+ goto out;
-+ ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
-+ if (ret)
-+ goto out;
-+ ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
-+ if (ret)
-+ goto out;
-+
-+out:
-+ kfree(buf);
-+ return ret;
-+}
-+
-+static int mt798x_phy_config_init(struct phy_device *phydev)
-+{
-+ switch (phydev->drv->phy_id) {
-+ case MTK_GPHY_ID_MT7981:
-+ mt7981_phy_finetune(phydev);
-+ break;
-+ case MTK_GPHY_ID_MT7988:
-+ mt7988_phy_finetune(phydev);
-+ break;
-+ }
-+
-+ mt798x_phy_common_finetune(phydev);
-+ mt798x_phy_eee(phydev);
-+
-+ return mt798x_phy_calibration(phydev);
-+}
-+
-+static struct phy_driver mtk_socphy_driver[] = {
-+ {
-+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
-+ .name = "MediaTek MT7981 PHY",
-+ .config_init = mt798x_phy_config_init,
-+ .config_intr = genphy_no_config_intr,
-+ .handle_interrupt = genphy_handle_interrupt_no_ack,
-+ .probe = mt798x_phy_calibration,
-+ .suspend = genphy_suspend,
-+ .resume = genphy_resume,
-+ .read_page = mtk_socphy_read_page,
-+ .write_page = mtk_socphy_write_page,
-+ },
-+ {
-+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
-+ .name = "MediaTek MT7988 PHY",
-+ .config_init = mt798x_phy_config_init,
-+ .config_intr = genphy_no_config_intr,
-+ .handle_interrupt = genphy_handle_interrupt_no_ack,
-+ .probe = mt798x_phy_calibration,
-+ .suspend = genphy_suspend,
-+ .resume = genphy_resume,
-+ .read_page = mtk_socphy_read_page,
-+ .write_page = mtk_socphy_write_page,
-+ },
-+};
-+
-+module_phy_driver(mtk_socphy_driver);
-+
-+static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
-+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
-+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
-+ { }
-+};
-+
-+MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
-+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
-+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
-+MODULE_LICENSE("GPL");
-+
-+MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
---- a/drivers/net/phy/mediatek-ge.c
-+++ b/drivers/net/phy/mediatek-ge.c
-@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive
- module_phy_driver(mtk_gephy_driver);
-
- static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
-- { PHY_ID_MATCH_VENDOR(0x03a29400) },
-+ { PHY_ID_MATCH_EXACT(0x03a29441) },
-+ { PHY_ID_MATCH_EXACT(0x03a29412) },
- { }
- };
-
+++ /dev/null
-From c66937b0f8dbb4c6c043663c702b1053fb47fab2 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 14 Aug 2023 02:58:14 +0100
-Subject: [PATCH] net: phy: mediatek-ge-soc: support PHY LEDs
-
-Implement netdev trigger and primitive bliking offloading as well as
-simple set_brigthness function for both PHY LEDs of the in-SoC PHYs
-found in MT7981 and MT7988.
-
-For MT7988, read boottrap register and apply LED polarities accordingly
-to get uniform behavior from all LEDs on MT7988.
-This requires syscon phandle 'mediatek,pio' present in parenting MDIO bus
-which should point to the syscon holding the boottrap register.
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Link: https://lore.kernel.org/r/dc324d48c00cd7350f3a506eaa785324cae97372.1691977904.git.daniel@makrotopia.org
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/phy/mediatek-ge-soc.c | 435 +++++++++++++++++++++++++++++-
- 1 file changed, 426 insertions(+), 9 deletions(-)
-
---- a/drivers/net/phy/mediatek-ge-soc.c
-+++ b/drivers/net/phy/mediatek-ge-soc.c
-@@ -1,11 +1,14 @@
- // SPDX-License-Identifier: GPL-2.0+
- #include <linux/bitfield.h>
-+#include <linux/bitmap.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/module.h>
- #include <linux/nvmem-consumer.h>
- #include <linux/of_address.h>
- #include <linux/of_platform.h>
- #include <linux/pinctrl/consumer.h>
- #include <linux/phy.h>
-+#include <linux/regmap.h>
-
- #define MTK_GPHY_ID_MT7981 0x03a29461
- #define MTK_GPHY_ID_MT7988 0x03a29481
-@@ -208,9 +211,42 @@
- #define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
- #define MTK_PHY_DA_TX_R50_PAIR_D 0x540
-
-+/* Registers on MDIO_MMD_VEND2 */
-+#define MTK_PHY_LED0_ON_CTRL 0x24
-+#define MTK_PHY_LED1_ON_CTRL 0x26
-+#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
-+#define MTK_PHY_LED_ON_LINK1000 BIT(0)
-+#define MTK_PHY_LED_ON_LINK100 BIT(1)
-+#define MTK_PHY_LED_ON_LINK10 BIT(2)
-+#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
-+#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
-+#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
-+#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
-+#define MTK_PHY_LED_ON_POLARITY BIT(14)
-+#define MTK_PHY_LED_ON_ENABLE BIT(15)
-+
-+#define MTK_PHY_LED0_BLINK_CTRL 0x25
-+#define MTK_PHY_LED1_BLINK_CTRL 0x27
-+#define MTK_PHY_LED_BLINK_1000TX BIT(0)
-+#define MTK_PHY_LED_BLINK_1000RX BIT(1)
-+#define MTK_PHY_LED_BLINK_100TX BIT(2)
-+#define MTK_PHY_LED_BLINK_100RX BIT(3)
-+#define MTK_PHY_LED_BLINK_10TX BIT(4)
-+#define MTK_PHY_LED_BLINK_10RX BIT(5)
-+#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
-+#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
-+#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
-+#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
-+
-+#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1)
-+
- #define MTK_PHY_RG_BG_RASEL 0x115
- #define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
-
-+/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */
-+#define RG_GPIO_MISC_TPBANK0 0x6f0
-+#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8)
-+
- /* These macro privides efuse parsing for internal phy. */
- #define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
- #define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
-@@ -238,13 +274,6 @@ enum {
- PAIR_D,
- };
-
--enum {
-- GPHY_PORT0,
-- GPHY_PORT1,
-- GPHY_PORT2,
-- GPHY_PORT3,
--};
--
- enum calibration_mode {
- EFUSE_K,
- SW_K
-@@ -263,6 +292,19 @@ enum CAL_MODE {
- SW_M
- };
-
-+#define MTK_PHY_LED_STATE_FORCE_ON 0
-+#define MTK_PHY_LED_STATE_FORCE_BLINK 1
-+#define MTK_PHY_LED_STATE_NETDEV 2
-+
-+struct mtk_socphy_priv {
-+ unsigned long led_state;
-+};
-+
-+struct mtk_socphy_shared {
-+ u32 boottrap;
-+ struct mtk_socphy_priv priv[4];
-+};
-+
- static int mtk_socphy_read_page(struct phy_device *phydev)
- {
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-@@ -1073,6 +1115,371 @@ static int mt798x_phy_config_init(struct
- return mt798x_phy_calibration(phydev);
- }
-
-+static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
-+ bool on)
-+{
-+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
-+ struct mtk_socphy_priv *priv = phydev->priv;
-+ bool changed;
-+
-+ if (on)
-+ changed = !test_and_set_bit(bit_on, &priv->led_state);
-+ else
-+ changed = !!test_and_clear_bit(bit_on, &priv->led_state);
-+
-+ changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
-+ (index ? 16 : 0), &priv->led_state);
-+ if (changed)
-+ return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
-+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
-+ MTK_PHY_LED_ON_MASK,
-+ on ? MTK_PHY_LED_ON_FORCE_ON : 0);
-+ else
-+ return 0;
-+}
-+
-+static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
-+ bool blinking)
-+{
-+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
-+ struct mtk_socphy_priv *priv = phydev->priv;
-+ bool changed;
-+
-+ if (blinking)
-+ changed = !test_and_set_bit(bit_blink, &priv->led_state);
-+ else
-+ changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
-+
-+ changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
-+ (index ? 16 : 0), &priv->led_state);
-+ if (changed)
-+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
-+ MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
-+ blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
-+ else
-+ return 0;
-+}
-+
-+static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
-+ unsigned long *delay_on,
-+ unsigned long *delay_off)
-+{
-+ bool blinking = false;
-+ int err = 0;
-+
-+ if (index > 1)
-+ return -EINVAL;
-+
-+ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
-+ blinking = true;
-+ *delay_on = 50;
-+ *delay_off = 50;
-+ }
-+
-+ err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
-+ if (err)
-+ return err;
-+
-+ return mt798x_phy_hw_led_on_set(phydev, index, false);
-+}
-+
-+static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
-+ u8 index, enum led_brightness value)
-+{
-+ int err;
-+
-+ err = mt798x_phy_hw_led_blink_set(phydev, index, false);
-+ if (err)
-+ return err;
-+
-+ return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
-+}
-+
-+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
-+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
-+ BIT(TRIGGER_NETDEV_LINK) |
-+ BIT(TRIGGER_NETDEV_LINK_10) |
-+ BIT(TRIGGER_NETDEV_LINK_100) |
-+ BIT(TRIGGER_NETDEV_LINK_1000) |
-+ BIT(TRIGGER_NETDEV_RX) |
-+ BIT(TRIGGER_NETDEV_TX));
-+
-+static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
-+ unsigned long rules)
-+{
-+ if (index > 1)
-+ return -EINVAL;
-+
-+ /* All combinations of the supported triggers are allowed */
-+ if (rules & ~supported_triggers)
-+ return -EOPNOTSUPP;
-+
-+ return 0;
-+};
-+
-+static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
-+ unsigned long *rules)
-+{
-+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
-+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
-+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
-+ struct mtk_socphy_priv *priv = phydev->priv;
-+ int on, blink;
-+
-+ if (index > 1)
-+ return -EINVAL;
-+
-+ on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
-+ index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
-+
-+ if (on < 0)
-+ return -EIO;
-+
-+ blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
-+ index ? MTK_PHY_LED1_BLINK_CTRL :
-+ MTK_PHY_LED0_BLINK_CTRL);
-+ if (blink < 0)
-+ return -EIO;
-+
-+ if ((on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 |
-+ MTK_PHY_LED_ON_LINK10)) ||
-+ (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX |
-+ MTK_PHY_LED_BLINK_10RX | MTK_PHY_LED_BLINK_1000TX |
-+ MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX)))
-+ set_bit(bit_netdev, &priv->led_state);
-+ else
-+ clear_bit(bit_netdev, &priv->led_state);
-+
-+ if (on & MTK_PHY_LED_ON_FORCE_ON)
-+ set_bit(bit_on, &priv->led_state);
-+ else
-+ clear_bit(bit_on, &priv->led_state);
-+
-+ if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
-+ set_bit(bit_blink, &priv->led_state);
-+ else
-+ clear_bit(bit_blink, &priv->led_state);
-+
-+ if (!rules)
-+ return 0;
-+
-+ if (on & (MTK_PHY_LED_ON_LINK1000 | MTK_PHY_LED_ON_LINK100 | MTK_PHY_LED_ON_LINK10))
-+ *rules |= BIT(TRIGGER_NETDEV_LINK);
-+
-+ if (on & MTK_PHY_LED_ON_LINK10)
-+ *rules |= BIT(TRIGGER_NETDEV_LINK_10);
-+
-+ if (on & MTK_PHY_LED_ON_LINK100)
-+ *rules |= BIT(TRIGGER_NETDEV_LINK_100);
-+
-+ if (on & MTK_PHY_LED_ON_LINK1000)
-+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
-+
-+ if (on & MTK_PHY_LED_ON_FDX)
-+ *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
-+
-+ if (on & MTK_PHY_LED_ON_HDX)
-+ *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
-+
-+ if (blink & (MTK_PHY_LED_BLINK_1000RX | MTK_PHY_LED_BLINK_100RX | MTK_PHY_LED_BLINK_10RX))
-+ *rules |= BIT(TRIGGER_NETDEV_RX);
-+
-+ if (blink & (MTK_PHY_LED_BLINK_1000TX | MTK_PHY_LED_BLINK_100TX | MTK_PHY_LED_BLINK_10TX))
-+ *rules |= BIT(TRIGGER_NETDEV_TX);
-+
-+ return 0;
-+};
-+
-+static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
-+ unsigned long rules)
-+{
-+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
-+ struct mtk_socphy_priv *priv = phydev->priv;
-+ u16 on = 0, blink = 0;
-+ int ret;
-+
-+ if (index > 1)
-+ return -EINVAL;
-+
-+ if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
-+ on |= MTK_PHY_LED_ON_FDX;
-+
-+ if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
-+ on |= MTK_PHY_LED_ON_HDX;
-+
-+ if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
-+ on |= MTK_PHY_LED_ON_LINK10;
-+
-+ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
-+ on |= MTK_PHY_LED_ON_LINK100;
-+
-+ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
-+ on |= MTK_PHY_LED_ON_LINK1000;
-+
-+ if (rules & BIT(TRIGGER_NETDEV_RX)) {
-+ blink |= MTK_PHY_LED_BLINK_10RX |
-+ MTK_PHY_LED_BLINK_100RX |
-+ MTK_PHY_LED_BLINK_1000RX;
-+ }
-+
-+ if (rules & BIT(TRIGGER_NETDEV_TX)) {
-+ blink |= MTK_PHY_LED_BLINK_10TX |
-+ MTK_PHY_LED_BLINK_100TX |
-+ MTK_PHY_LED_BLINK_1000TX;
-+ }
-+
-+ if (blink || on)
-+ set_bit(bit_netdev, &priv->led_state);
-+ else
-+ clear_bit(bit_netdev, &priv->led_state);
-+
-+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
-+ MTK_PHY_LED1_ON_CTRL :
-+ MTK_PHY_LED0_ON_CTRL,
-+ MTK_PHY_LED_ON_FDX |
-+ MTK_PHY_LED_ON_HDX |
-+ MTK_PHY_LED_ON_LINK10 |
-+ MTK_PHY_LED_ON_LINK100 |
-+ MTK_PHY_LED_ON_LINK1000,
-+ on);
-+
-+ if (ret)
-+ return ret;
-+
-+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
-+ MTK_PHY_LED1_BLINK_CTRL :
-+ MTK_PHY_LED0_BLINK_CTRL, blink);
-+};
-+
-+static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
-+{
-+ struct mtk_socphy_shared *priv = phydev->shared->priv;
-+ u32 polarities;
-+
-+ if (led_num == 0)
-+ polarities = ~(priv->boottrap);
-+ else
-+ polarities = MTK_PHY_LED1_DEFAULT_POLARITIES;
-+
-+ if (polarities & BIT(phydev->mdio.addr))
-+ return true;
-+
-+ return false;
-+}
-+
-+static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev)
-+{
-+ struct pinctrl *pinctrl;
-+ int index;
-+
-+ /* Setup LED polarity according to bootstrap use of LED pins */
-+ for (index = 0; index < 2; ++index)
-+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
-+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
-+ MTK_PHY_LED_ON_POLARITY,
-+ mt7988_phy_led_get_polarity(phydev, index) ?
-+ MTK_PHY_LED_ON_POLARITY : 0);
-+
-+ /* Only now setup pinctrl to avoid bogus blinking */
-+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
-+ if (IS_ERR(pinctrl))
-+ dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
-+
-+ return 0;
-+}
-+
-+static int mt7988_phy_probe_shared(struct phy_device *phydev)
-+{
-+ struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
-+ struct mtk_socphy_shared *shared = phydev->shared->priv;
-+ struct regmap *regmap;
-+ u32 reg;
-+ int ret;
-+
-+ /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
-+ * LED_C and LED_D respectively. At the same time those pins are used to
-+ * bootstrap configuration of the reference clock source (LED_A),
-+ * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
-+ * In practise this is done using a LED and a resistor pulling the pin
-+ * either to GND or to VIO.
-+ * The detected value at boot time is accessible at run-time using the
-+ * TPBANK0 register located in the gpio base of the pinctrl, in order
-+ * to read it here it needs to be referenced by a phandle called
-+ * 'mediatek,pio' in the MDIO bus hosting the PHY.
-+ * The 4 bits in TPBANK0 are kept as package shared data and are used to
-+ * set LED polarity for each of the LED0.
-+ */
-+ regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
-+ if (IS_ERR(regmap))
-+ return PTR_ERR(regmap);
-+
-+ ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®);
-+ if (ret)
-+ return ret;
-+
-+ shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
-+
-+ return 0;
-+}
-+
-+static void mt798x_phy_leds_state_init(struct phy_device *phydev)
-+{
-+ int i;
-+
-+ for (i = 0; i < 2; ++i)
-+ mt798x_phy_led_hw_control_get(phydev, i, NULL);
-+}
-+
-+static int mt7988_phy_probe(struct phy_device *phydev)
-+{
-+ struct mtk_socphy_shared *shared;
-+ struct mtk_socphy_priv *priv;
-+ int err;
-+
-+ if (phydev->mdio.addr > 3)
-+ return -EINVAL;
-+
-+ err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
-+ sizeof(struct mtk_socphy_shared));
-+ if (err)
-+ return err;
-+
-+ if (phy_package_probe_once(phydev)) {
-+ err = mt7988_phy_probe_shared(phydev);
-+ if (err)
-+ return err;
-+ }
-+
-+ shared = phydev->shared->priv;
-+ priv = &shared->priv[phydev->mdio.addr];
-+
-+ phydev->priv = priv;
-+
-+ mt798x_phy_leds_state_init(phydev);
-+
-+ err = mt7988_phy_fix_leds_polarities(phydev);
-+ if (err)
-+ return err;
-+
-+ return mt798x_phy_calibration(phydev);
-+}
-+
-+static int mt7981_phy_probe(struct phy_device *phydev)
-+{
-+ struct mtk_socphy_priv *priv;
-+
-+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv),
-+ GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ phydev->priv = priv;
-+
-+ mt798x_phy_leds_state_init(phydev);
-+
-+ return mt798x_phy_calibration(phydev);
-+}
-+
- static struct phy_driver mtk_socphy_driver[] = {
- {
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
-@@ -1080,11 +1487,16 @@ static struct phy_driver mtk_socphy_driv
- .config_init = mt798x_phy_config_init,
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
-- .probe = mt798x_phy_calibration,
-+ .probe = mt7981_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
-+ .led_blink_set = mt798x_phy_led_blink_set,
-+ .led_brightness_set = mt798x_phy_led_brightness_set,
-+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
-+ .led_hw_control_set = mt798x_phy_led_hw_control_set,
-+ .led_hw_control_get = mt798x_phy_led_hw_control_get,
- },
- {
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
-@@ -1092,11 +1504,16 @@ static struct phy_driver mtk_socphy_driv
- .config_init = mt798x_phy_config_init,
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
-- .probe = mt798x_phy_calibration,
-+ .probe = mt7988_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
-+ .led_blink_set = mt798x_phy_led_blink_set,
-+ .led_brightness_set = mt798x_phy_led_brightness_set,
-+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
-+ .led_hw_control_set = mt798x_phy_led_hw_control_set,
-+ .led_hw_control_get = mt798x_phy_led_hw_control_get,
- },
- };
-
+++ /dev/null
---- a/drivers/pwm/pwm-mediatek.c
-+++ b/drivers/pwm/pwm-mediatek.c
-@@ -329,6 +329,12 @@ static const struct pwm_mediatek_of_data
- .has_ck_26m_sel = true,
- };
-
-+static const struct pwm_mediatek_of_data mt7986_pwm_data = {
-+ .num_pwms = 2,
-+ .pwm45_fixup = false,
-+ .has_ck_26m_sel = true,
-+};
-+
- static const struct pwm_mediatek_of_data mt8516_pwm_data = {
- .num_pwms = 5,
- .pwm45_fixup = false,
-@@ -342,6 +348,7 @@ static const struct of_device_id pwm_med
- { .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
- { .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
- { .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
-+ { .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data },
- { .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
- { .compatible = "mediatek,mt8365-pwm", .data = &mt8365_pwm_data },
- { .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data },
+++ /dev/null
-From fae82621ac33e2a4a96220c56e90d1ec6237d394 Mon Sep 17 00:00:00 2001
-From: Sam Shih <sam.shih@mediatek.com>
-Date: Sun, 6 Nov 2022 09:01:12 +0100
-Subject: [PATCH] pinctrl: mediatek: extend pinctrl-moore to support new bias
- functions
-
-Commit fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
-introduced SoC specify 'pull_type' attribute to mtk_pinconf_bias_set_combo
-and mtk_pinconf_bias_get_combo, and make the functions able to support
-almost all Mediatek SoCs that use pinctrl-mtk-common-v2.c.
-
-This patch enables pinctrl_moore to support these functions.
-
-Signed-off-by: Sam Shih <sam.shih@mediatek.com>
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221106080114.7426-6-linux@fw-web.de
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/mediatek/pinctrl-moore.c | 49 ++++++++++++++++++++----
- 1 file changed, 42 insertions(+), 7 deletions(-)
-
---- a/drivers/pinctrl/mediatek/pinctrl-moore.c
-+++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
-@@ -8,6 +8,7 @@
- *
- */
-
-+#include <dt-bindings/pinctrl/mt65xx.h>
- #include <linux/gpio/driver.h>
- #include "pinctrl-moore.h"
-
-@@ -105,7 +106,7 @@ static int mtk_pinconf_get(struct pinctr
- {
- struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
- u32 param = pinconf_to_config_param(*config);
-- int val, val2, err, reg, ret = 1;
-+ int val, val2, err, pullup, reg, ret = 1;
- const struct mtk_pin_desc *desc;
-
- desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
-@@ -114,7 +115,13 @@ static int mtk_pinconf_get(struct pinctr
-
- switch (param) {
- case PIN_CONFIG_BIAS_DISABLE:
-- if (hw->soc->bias_disable_get) {
-+ if (hw->soc->bias_get_combo) {
-+ err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
-+ if (err)
-+ return err;
-+ if (ret != MTK_PUPD_SET_R1R0_00 && ret != MTK_DISABLE)
-+ return -EINVAL;
-+ } else if (hw->soc->bias_disable_get) {
- err = hw->soc->bias_disable_get(hw, desc, &ret);
- if (err)
- return err;
-@@ -123,7 +130,15 @@ static int mtk_pinconf_get(struct pinctr
- }
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
-- if (hw->soc->bias_get) {
-+ if (hw->soc->bias_get_combo) {
-+ err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
-+ if (err)
-+ return err;
-+ if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE)
-+ return -EINVAL;
-+ if (!pullup)
-+ return -EINVAL;
-+ } else if (hw->soc->bias_get) {
- err = hw->soc->bias_get(hw, desc, 1, &ret);
- if (err)
- return err;
-@@ -132,7 +147,15 @@ static int mtk_pinconf_get(struct pinctr
- }
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
-- if (hw->soc->bias_get) {
-+ if (hw->soc->bias_get_combo) {
-+ err = hw->soc->bias_get_combo(hw, desc, &pullup, &ret);
-+ if (err)
-+ return err;
-+ if (ret == MTK_PUPD_SET_R1R0_00 || ret == MTK_DISABLE)
-+ return -EINVAL;
-+ if (pullup)
-+ return -EINVAL;
-+ } else if (hw->soc->bias_get) {
- err = hw->soc->bias_get(hw, desc, 0, &ret);
- if (err)
- return err;
-@@ -235,7 +258,11 @@ static int mtk_pinconf_set(struct pinctr
-
- switch (param) {
- case PIN_CONFIG_BIAS_DISABLE:
-- if (hw->soc->bias_disable_set) {
-+ if (hw->soc->bias_set_combo) {
-+ err = hw->soc->bias_set_combo(hw, desc, 0, MTK_DISABLE);
-+ if (err)
-+ return err;
-+ } else if (hw->soc->bias_disable_set) {
- err = hw->soc->bias_disable_set(hw, desc);
- if (err)
- return err;
-@@ -244,7 +271,11 @@ static int mtk_pinconf_set(struct pinctr
- }
- break;
- case PIN_CONFIG_BIAS_PULL_UP:
-- if (hw->soc->bias_set) {
-+ if (hw->soc->bias_set_combo) {
-+ err = hw->soc->bias_set_combo(hw, desc, 1, arg);
-+ if (err)
-+ return err;
-+ } else if (hw->soc->bias_set) {
- err = hw->soc->bias_set(hw, desc, 1);
- if (err)
- return err;
-@@ -253,7 +284,11 @@ static int mtk_pinconf_set(struct pinctr
- }
- break;
- case PIN_CONFIG_BIAS_PULL_DOWN:
-- if (hw->soc->bias_set) {
-+ if (hw->soc->bias_set_combo) {
-+ err = hw->soc->bias_set_combo(hw, desc, 0, arg);
-+ if (err)
-+ return err;
-+ } else if (hw->soc->bias_set) {
- err = hw->soc->bias_set(hw, desc, 0);
- if (err)
- return err;
+++ /dev/null
-From f167da186acf90847e1a6d3716e253825a6218ec Mon Sep 17 00:00:00 2001
-From: Randy Dunlap <rdunlap@infradead.org>
-Date: Thu, 12 Jan 2023 22:44:49 -0800
-Subject: [PATCH 01/42] thermal/drivers/mtk_thermal: Fix kernel-doc function
- name
-
-Use the correct function name in a kernel-doc comment to prevent
-a warning:
-
-drivers/thermal/mtk_thermal.c:562: warning: expecting prototype for raw_to_mcelsius(). Prototype was for raw_to_mcelsius_v1() instead
-
-Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
-Cc: "Rafael J. Wysocki" <rafael@kernel.org>
-Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
-Cc: Amit Kucheria <amitk@kernel.org>
-Cc: Zhang Rui <rui.zhang@intel.com>
-Cc: Matthias Brugger <matthias.bgg@gmail.com>
-Cc: linux-pm@vger.kernel.org
-Cc: linux-arm-kernel@lists.infradead.org
-Cc: linux-mediatek@lists.infradead.org
-Link: https://lore.kernel.org/r/20230113064449.15061-1-rdunlap@infradead.org
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -550,7 +550,7 @@ static const struct mtk_thermal_data mt8
- };
-
- /**
-- * raw_to_mcelsius - convert a raw ADC value to mcelsius
-+ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
- * @mt: The thermal controller
- * @sensno: sensor number
- * @raw: raw ADC value
+++ /dev/null
-From 255509232417ee71fd606cb957d44cf6544f0c43 Mon Sep 17 00:00:00 2001
-From: ye xingchen <ye.xingchen@zte.com.cn>
-Date: Wed, 18 Jan 2023 16:37:47 +0800
-Subject: [PATCH 02/42] thermal/drivers/mtk_thermal: Use
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
-Link: https://lore.kernel.org/r/202301181637472073620@zte.com.cn
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 4 +---
- 1 file changed, 1 insertion(+), 3 deletions(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -990,7 +990,6 @@ static int mtk_thermal_probe(struct plat
- int ret, i, ctrl_id;
- struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
- struct mtk_thermal *mt;
-- struct resource *res;
- u64 auxadc_phys_base, apmixed_phys_base;
- struct thermal_zone_device *tzdev;
- void __iomem *apmixed_base, *auxadc_base;
-@@ -1009,8 +1008,7 @@ static int mtk_thermal_probe(struct plat
- if (IS_ERR(mt->clk_auxadc))
- return PTR_ERR(mt->clk_auxadc);
-
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- mt->thermal_base = devm_ioremap_resource(&pdev->dev, res);
-+ mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
- if (IS_ERR(mt->thermal_base))
- return PTR_ERR(mt->thermal_base);
-
+++ /dev/null
-From ca86dbd309ba03bef38ae91f037e2030bb671ab7 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Jan 2023 15:40:39 +0000
-Subject: [PATCH 03/42] thermal/drivers/mtk: Use function pointer for
- raw_to_mcelsius
-
-Instead of having if-else logic selecting either raw_to_mcelsius_v1 or
-raw_to_mcelsius_v2 in mtk_thermal_bank_temperature introduce a function
-pointer raw_to_mcelsius to struct mtk_thermal which is initialized in the
-probe function.
-
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Link: https://lore.kernel.org/r/69c17529e8418da3eec703dde31e1b01e5b0f7e8.1674055882.git.daniel@makrotopia.org
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 17 ++++++++++-------
- 1 file changed, 10 insertions(+), 7 deletions(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -292,6 +292,8 @@ struct mtk_thermal {
-
- const struct mtk_thermal_data *conf;
- struct mtk_thermal_bank banks[MAX_NUM_ZONES];
-+
-+ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
- };
-
- /* MT8183 thermal sensor data */
-@@ -656,13 +658,9 @@ static int mtk_thermal_bank_temperature(
- for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
- raw = readl(mt->thermal_base + conf->msr[i]);
-
-- if (mt->conf->version == MTK_THERMAL_V1) {
-- temp = raw_to_mcelsius_v1(
-- mt, conf->bank_data[bank->id].sensors[i], raw);
-- } else {
-- temp = raw_to_mcelsius_v2(
-- mt, conf->bank_data[bank->id].sensors[i], raw);
-- }
-+ temp = mt->raw_to_mcelsius(
-+ mt, conf->bank_data[bank->id].sensors[i], raw);
-+
-
- /*
- * The first read of a sensor often contains very high bogus
-@@ -1073,6 +1071,11 @@ static int mtk_thermal_probe(struct plat
- mtk_thermal_release_periodic_ts(mt, auxadc_base);
- }
-
-+ if (mt->conf->version == MTK_THERMAL_V1)
-+ mt->raw_to_mcelsius = raw_to_mcelsius_v1;
-+ else
-+ mt->raw_to_mcelsius = raw_to_mcelsius_v2;
-+
- for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
- for (i = 0; i < mt->conf->num_banks; i++)
- mtk_thermal_init_bank(mt, i, apmixed_phys_base,
+++ /dev/null
-From aec1d89dccc7cba04fdb3e52dfda328f3302ba17 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Wed, 18 Jan 2023 15:40:58 +0000
-Subject: [PATCH 04/42] thermal/drivers/mtk: Add support for MT7986 and MT7981
-
-Add support for V3 generation thermal found in MT7986 and MT7981 SoCs.
-Brings code to assign values from efuse as well as new function to
-convert raw temperature to millidegree celsius, as found in MediaTek's
-SDK sources (but cleaned up and de-duplicated)
-
-[1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/baf36c7eef477aae1f8f2653b6c29e2caf48475b
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/2d341fc45266217249586eb4bd3be3ac4ca83a12.1674055882.git.daniel@makrotopia.org
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mtk_thermal.c | 128 ++++++++++++++++++++++++++++++++--
- 1 file changed, 124 insertions(+), 4 deletions(-)
-
---- a/drivers/thermal/mtk_thermal.c
-+++ b/drivers/thermal/mtk_thermal.c
-@@ -150,6 +150,20 @@
- #define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1)
- #define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1)
-
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros can be used for MT7981 and MT7986.
-+ */
-+#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff)
-+#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f)
-+#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff)
-+#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff)
-+#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1)
-+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1)
-+#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1)
-+
- enum {
- VTS1,
- VTS2,
-@@ -163,6 +177,7 @@ enum {
- enum mtk_thermal_version {
- MTK_THERMAL_V1 = 1,
- MTK_THERMAL_V2,
-+ MTK_THERMAL_V3,
- };
-
- /* MT2701 thermal sensors */
-@@ -245,6 +260,27 @@ enum mtk_thermal_version {
- /* The calibration coefficient of sensor */
- #define MT8183_CALIBRATION 153
-
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT7986_TEMP_AUXADC_CHANNEL 11
-+
-+/* The total number of temperature sensors in the MT7986 */
-+#define MT7986_NUM_SENSORS 1
-+
-+/* The number of banks in the MT7986 */
-+#define MT7986_NUM_ZONES 1
-+
-+/* The number of sensing points per bank */
-+#define MT7986_NUM_SENSORS_PER_ZONE 1
-+
-+/* MT7986 thermal sensors */
-+#define MT7986_TS1 0
-+
-+/* The number of controller in the MT7986 */
-+#define MT7986_NUM_CONTROLLER 1
-+
-+/* The calibration coefficient of sensor */
-+#define MT7986_CALIBRATION 165
-+
- struct mtk_thermal;
-
- struct thermal_bank_cfg {
-@@ -388,6 +424,14 @@ static const int mt7622_mux_values[MT762
- static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
- static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
-
-+/* MT7986 thermal sensor data */
-+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, };
-+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
-+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
-+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
-+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
-+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
-+
- /*
- * The MT8173 thermal controller has four banks. Each bank can read up to
- * four temperature sensors simultaneously. The MT8173 has a total of 5
-@@ -551,6 +595,30 @@ static const struct mtk_thermal_data mt8
- .version = MTK_THERMAL_V1,
- };
-
-+/*
-+ * MT7986 uses AUXADC Channel 11 for raw data access.
-+ */
-+static const struct mtk_thermal_data mt7986_thermal_data = {
-+ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL,
-+ .num_banks = MT7986_NUM_ZONES,
-+ .num_sensors = MT7986_NUM_SENSORS,
-+ .vts_index = mt7986_vts_index,
-+ .cali_val = MT7986_CALIBRATION,
-+ .num_controller = MT7986_NUM_CONTROLLER,
-+ .controller_offset = mt7986_tc_offset,
-+ .need_switch_bank = true,
-+ .bank_data = {
-+ {
-+ .num_sensors = 1,
-+ .sensors = mt7986_bank_data,
-+ },
-+ },
-+ .msr = mt7986_msr,
-+ .adcpnp = mt7986_adcpnp,
-+ .sensor_mux_values = mt7986_mux_values,
-+ .version = MTK_THERMAL_V3,
-+};
-+
- /**
- * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
- * @mt: The thermal controller
-@@ -605,6 +673,22 @@ static int raw_to_mcelsius_v2(struct mtk
- return (format_2 - tmp) * 100;
- }
-
-+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+ s32 tmp;
-+
-+ if (raw == 0)
-+ return 0;
-+
-+ raw &= 0xfff;
-+ tmp = 100000 * 15 / 16 * 10000;
-+ tmp /= 4096 - 512 + mt->adc_ge;
-+ tmp /= 1490;
-+ tmp *= raw - mt->vts[sensno] - 2900;
-+
-+ return mt->degc_cali * 500 - tmp;
-+}
-+
- /**
- * mtk_thermal_get_bank - get bank
- * @bank: The bank
-@@ -885,6 +969,25 @@ static int mtk_thermal_extract_efuse_v2(
- return 0;
- }
-
-+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf)
-+{
-+ if (!CALIB_BUF1_VALID_V3(buf[1]))
-+ return -EINVAL;
-+
-+ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]);
-+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]);
-+ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]);
-+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]);
-+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]);
-+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]);
-+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]);
-+
-+ if (CALIB_BUF1_ID_V3(buf[1]) == 0)
-+ mt->o_slope = 0;
-+
-+ return 0;
-+}
-+
- static int mtk_thermal_get_calibration_data(struct device *dev,
- struct mtk_thermal *mt)
- {
-@@ -895,6 +998,7 @@ static int mtk_thermal_get_calibration_d
-
- /* Start with default values */
- mt->adc_ge = 512;
-+ mt->adc_oe = 512;
- for (i = 0; i < mt->conf->num_sensors; i++)
- mt->vts[i] = 260;
- mt->degc_cali = 40;
-@@ -920,10 +1024,20 @@ static int mtk_thermal_get_calibration_d
- goto out;
- }
-
-- if (mt->conf->version == MTK_THERMAL_V1)
-+ switch (mt->conf->version) {
-+ case MTK_THERMAL_V1:
- ret = mtk_thermal_extract_efuse_v1(mt, buf);
-- else
-+ break;
-+ case MTK_THERMAL_V2:
- ret = mtk_thermal_extract_efuse_v2(mt, buf);
-+ break;
-+ case MTK_THERMAL_V3:
-+ ret = mtk_thermal_extract_efuse_v3(mt, buf);
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ break;
-+ }
-
- if (ret) {
- dev_info(dev, "Device not calibrated, using default calibration values\n");
-@@ -954,6 +1068,10 @@ static const struct of_device_id mtk_the
- .data = (void *)&mt7622_thermal_data,
- },
- {
-+ .compatible = "mediatek,mt7986-thermal",
-+ .data = (void *)&mt7986_thermal_data,
-+ },
-+ {
- .compatible = "mediatek,mt8183-thermal",
- .data = (void *)&mt8183_thermal_data,
- }, {
-@@ -1066,15 +1184,17 @@ static int mtk_thermal_probe(struct plat
- goto err_disable_clk_auxadc;
- }
-
-- if (mt->conf->version == MTK_THERMAL_V2) {
-+ if (mt->conf->version != MTK_THERMAL_V1) {
- mtk_thermal_turn_on_buffer(apmixed_base);
- mtk_thermal_release_periodic_ts(mt, auxadc_base);
- }
-
- if (mt->conf->version == MTK_THERMAL_V1)
- mt->raw_to_mcelsius = raw_to_mcelsius_v1;
-- else
-+ else if (mt->conf->version == MTK_THERMAL_V2)
- mt->raw_to_mcelsius = raw_to_mcelsius_v2;
-+ else
-+ mt->raw_to_mcelsius = raw_to_mcelsius_v3;
-
- for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
- for (i = 0; i < mt->conf->num_banks; i++)
+++ /dev/null
-From 5e3aac197a74914ccec2732a89c29d960730d28f Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Thu, 9 Feb 2023 11:56:23 +0100
-Subject: [PATCH 05/42] thermal/drivers/mediatek: Relocate driver to mediatek
- folder
-
-Add MediaTek proprietary folder to upstream more thermal zone and cooler
-drivers, relocate the original thermal controller driver to it, and rename it
-as "auxadc_thermal.c" to show its purpose more clearly.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230209105628.50294-2-bchihi@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/Kconfig | 14 ++++---------
- drivers/thermal/Makefile | 2 +-
- drivers/thermal/mediatek/Kconfig | 21 +++++++++++++++++++
- drivers/thermal/mediatek/Makefile | 1 +
- .../auxadc_thermal.c} | 2 +-
- 5 files changed, 28 insertions(+), 12 deletions(-)
- create mode 100644 drivers/thermal/mediatek/Kconfig
- create mode 100644 drivers/thermal/mediatek/Makefile
- rename drivers/thermal/{mtk_thermal.c => mediatek/auxadc_thermal.c} (99%)
-
---- a/drivers/thermal/Kconfig
-+++ b/drivers/thermal/Kconfig
-@@ -412,16 +412,10 @@ config DA9062_THERMAL
- zone.
- Compatible with the DA9062 and DA9061 PMICs.
-
--config MTK_THERMAL
-- tristate "Temperature sensor driver for mediatek SoCs"
-- depends on ARCH_MEDIATEK || COMPILE_TEST
-- depends on HAS_IOMEM
-- depends on NVMEM || NVMEM=n
-- depends on RESET_CONTROLLER
-- default y
-- help
-- Enable this option if you want to have support for thermal management
-- controller present in Mediatek SoCs
-+menu "Mediatek thermal drivers"
-+depends on ARCH_MEDIATEK || COMPILE_TEST
-+source "drivers/thermal/mediatek/Kconfig"
-+endmenu
-
- config AMLOGIC_THERMAL
- tristate "Amlogic Thermal Support"
---- a/drivers/thermal/Makefile
-+++ b/drivers/thermal/Makefile
-@@ -55,7 +55,7 @@ obj-y += st/
- obj-y += qcom/
- obj-y += tegra/
- obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o
--obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o
-+obj-y += mediatek/
- obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o
- obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o
- obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
---- /dev/null
-+++ b/drivers/thermal/mediatek/Kconfig
-@@ -0,0 +1,21 @@
-+config MTK_THERMAL
-+ tristate "MediaTek thermal drivers"
-+ depends on THERMAL_OF
-+ help
-+ This is the option for MediaTek thermal software solutions.
-+ Please enable corresponding options to get temperature
-+ information from thermal sensors or turn on throttle
-+ mechaisms for thermal mitigation.
-+
-+if MTK_THERMAL
-+
-+config MTK_SOC_THERMAL
-+ tristate "AUXADC temperature sensor driver for MediaTek SoCs"
-+ depends on HAS_IOMEM
-+ help
-+ Enable this option if you want to get SoC temperature
-+ information for MediaTek platforms.
-+ This driver configures thermal controllers to collect
-+ temperature via AUXADC interface.
-+
-+endif
---- /dev/null
-+++ b/drivers/thermal/mediatek/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o
---- a/drivers/thermal/mtk_thermal.c
-+++ /dev/null
-@@ -1,1254 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (c) 2015 MediaTek Inc.
-- * Author: Hanyi Wu <hanyi.wu@mediatek.com>
-- * Sascha Hauer <s.hauer@pengutronix.de>
-- * Dawei Chien <dawei.chien@mediatek.com>
-- * Louis Yu <louis.yu@mediatek.com>
-- */
--
--#include <linux/clk.h>
--#include <linux/delay.h>
--#include <linux/interrupt.h>
--#include <linux/kernel.h>
--#include <linux/module.h>
--#include <linux/nvmem-consumer.h>
--#include <linux/of.h>
--#include <linux/of_address.h>
--#include <linux/of_device.h>
--#include <linux/platform_device.h>
--#include <linux/slab.h>
--#include <linux/io.h>
--#include <linux/thermal.h>
--#include <linux/reset.h>
--#include <linux/types.h>
--
--#include "thermal_hwmon.h"
--
--/* AUXADC Registers */
--#define AUXADC_CON1_SET_V 0x008
--#define AUXADC_CON1_CLR_V 0x00c
--#define AUXADC_CON2_V 0x010
--#define AUXADC_DATA(channel) (0x14 + (channel) * 4)
--
--#define APMIXED_SYS_TS_CON1 0x604
--
--/* Thermal Controller Registers */
--#define TEMP_MONCTL0 0x000
--#define TEMP_MONCTL1 0x004
--#define TEMP_MONCTL2 0x008
--#define TEMP_MONIDET0 0x014
--#define TEMP_MONIDET1 0x018
--#define TEMP_MSRCTL0 0x038
--#define TEMP_MSRCTL1 0x03c
--#define TEMP_AHBPOLL 0x040
--#define TEMP_AHBTO 0x044
--#define TEMP_ADCPNP0 0x048
--#define TEMP_ADCPNP1 0x04c
--#define TEMP_ADCPNP2 0x050
--#define TEMP_ADCPNP3 0x0b4
--
--#define TEMP_ADCMUX 0x054
--#define TEMP_ADCEN 0x060
--#define TEMP_PNPMUXADDR 0x064
--#define TEMP_ADCMUXADDR 0x068
--#define TEMP_ADCENADDR 0x074
--#define TEMP_ADCVALIDADDR 0x078
--#define TEMP_ADCVOLTADDR 0x07c
--#define TEMP_RDCTRL 0x080
--#define TEMP_ADCVALIDMASK 0x084
--#define TEMP_ADCVOLTAGESHIFT 0x088
--#define TEMP_ADCWRITECTRL 0x08c
--#define TEMP_MSR0 0x090
--#define TEMP_MSR1 0x094
--#define TEMP_MSR2 0x098
--#define TEMP_MSR3 0x0B8
--
--#define TEMP_SPARE0 0x0f0
--
--#define TEMP_ADCPNP0_1 0x148
--#define TEMP_ADCPNP1_1 0x14c
--#define TEMP_ADCPNP2_1 0x150
--#define TEMP_MSR0_1 0x190
--#define TEMP_MSR1_1 0x194
--#define TEMP_MSR2_1 0x198
--#define TEMP_ADCPNP3_1 0x1b4
--#define TEMP_MSR3_1 0x1B8
--
--#define PTPCORESEL 0x400
--
--#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff)
--
--#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16)
--#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff)
--
--#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x)
--
--#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE BIT(0)
--#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE BIT(1)
--
--#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5)
--#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit)
--
--/* MT8173 thermal sensors */
--#define MT8173_TS1 0
--#define MT8173_TS2 1
--#define MT8173_TS3 2
--#define MT8173_TS4 3
--#define MT8173_TSABB 4
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT8173_TEMP_AUXADC_CHANNEL 11
--
--/* The total number of temperature sensors in the MT8173 */
--#define MT8173_NUM_SENSORS 5
--
--/* The number of banks in the MT8173 */
--#define MT8173_NUM_ZONES 4
--
--/* The number of sensing points per bank */
--#define MT8173_NUM_SENSORS_PER_ZONE 4
--
--/* The number of controller in the MT8173 */
--#define MT8173_NUM_CONTROLLER 1
--
--/* The calibration coefficient of sensor */
--#define MT8173_CALIBRATION 165
--
--/*
-- * Layout of the fuses providing the calibration data
-- * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
-- * MT8183 has 6 sensors and needs 6 VTS calibration data.
-- * MT8173 has 5 sensors and needs 5 VTS calibration data.
-- * MT2701 has 3 sensors and needs 3 VTS calibration data.
-- * MT2712 has 4 sensors and needs 4 VTS calibration data.
-- */
--#define CALIB_BUF0_VALID_V1 BIT(0)
--#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff)
--#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff)
--#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff)
--#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff)
--#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff)
--#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff)
--#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff)
--#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1)
--#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1)
--
--/*
-- * Layout of the fuses providing the calibration data
-- * These macros could be used for MT7622.
-- */
--#define CALIB_BUF0_ADC_OE_V2(x) (((x) >> 22) & 0x3ff)
--#define CALIB_BUF0_ADC_GE_V2(x) (((x) >> 12) & 0x3ff)
--#define CALIB_BUF0_DEGC_CALI_V2(x) (((x) >> 6) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_V2(x) (((x) >> 0) & 0x3f)
--#define CALIB_BUF1_VTS_TS1_V2(x) (((x) >> 23) & 0x1ff)
--#define CALIB_BUF1_VTS_TS2_V2(x) (((x) >> 14) & 0x1ff)
--#define CALIB_BUF1_VTS_TSABB_V2(x) (((x) >> 5) & 0x1ff)
--#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1)
--#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1)
--
--/*
-- * Layout of the fuses providing the calibration data
-- * These macros can be used for MT7981 and MT7986.
-- */
--#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff)
--#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f)
--#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f)
--#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff)
--#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff)
--#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff)
--#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1)
--#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1)
--#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1)
--
--enum {
-- VTS1,
-- VTS2,
-- VTS3,
-- VTS4,
-- VTS5,
-- VTSABB,
-- MAX_NUM_VTS,
--};
--
--enum mtk_thermal_version {
-- MTK_THERMAL_V1 = 1,
-- MTK_THERMAL_V2,
-- MTK_THERMAL_V3,
--};
--
--/* MT2701 thermal sensors */
--#define MT2701_TS1 0
--#define MT2701_TS2 1
--#define MT2701_TSABB 2
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT2701_TEMP_AUXADC_CHANNEL 11
--
--/* The total number of temperature sensors in the MT2701 */
--#define MT2701_NUM_SENSORS 3
--
--/* The number of sensing points per bank */
--#define MT2701_NUM_SENSORS_PER_ZONE 3
--
--/* The number of controller in the MT2701 */
--#define MT2701_NUM_CONTROLLER 1
--
--/* The calibration coefficient of sensor */
--#define MT2701_CALIBRATION 165
--
--/* MT2712 thermal sensors */
--#define MT2712_TS1 0
--#define MT2712_TS2 1
--#define MT2712_TS3 2
--#define MT2712_TS4 3
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT2712_TEMP_AUXADC_CHANNEL 11
--
--/* The total number of temperature sensors in the MT2712 */
--#define MT2712_NUM_SENSORS 4
--
--/* The number of sensing points per bank */
--#define MT2712_NUM_SENSORS_PER_ZONE 4
--
--/* The number of controller in the MT2712 */
--#define MT2712_NUM_CONTROLLER 1
--
--/* The calibration coefficient of sensor */
--#define MT2712_CALIBRATION 165
--
--#define MT7622_TEMP_AUXADC_CHANNEL 11
--#define MT7622_NUM_SENSORS 1
--#define MT7622_NUM_ZONES 1
--#define MT7622_NUM_SENSORS_PER_ZONE 1
--#define MT7622_TS1 0
--#define MT7622_NUM_CONTROLLER 1
--
--/* The maximum number of banks */
--#define MAX_NUM_ZONES 8
--
--/* The calibration coefficient of sensor */
--#define MT7622_CALIBRATION 165
--
--/* MT8183 thermal sensors */
--#define MT8183_TS1 0
--#define MT8183_TS2 1
--#define MT8183_TS3 2
--#define MT8183_TS4 3
--#define MT8183_TS5 4
--#define MT8183_TSABB 5
--
--/* AUXADC channel is used for the temperature sensors */
--#define MT8183_TEMP_AUXADC_CHANNEL 11
--
--/* The total number of temperature sensors in the MT8183 */
--#define MT8183_NUM_SENSORS 6
--
--/* The number of banks in the MT8183 */
--#define MT8183_NUM_ZONES 1
--
--/* The number of sensing points per bank */
--#define MT8183_NUM_SENSORS_PER_ZONE 6
--
--/* The number of controller in the MT8183 */
--#define MT8183_NUM_CONTROLLER 2
--
--/* The calibration coefficient of sensor */
--#define MT8183_CALIBRATION 153
--
--/* AUXADC channel 11 is used for the temperature sensors */
--#define MT7986_TEMP_AUXADC_CHANNEL 11
--
--/* The total number of temperature sensors in the MT7986 */
--#define MT7986_NUM_SENSORS 1
--
--/* The number of banks in the MT7986 */
--#define MT7986_NUM_ZONES 1
--
--/* The number of sensing points per bank */
--#define MT7986_NUM_SENSORS_PER_ZONE 1
--
--/* MT7986 thermal sensors */
--#define MT7986_TS1 0
--
--/* The number of controller in the MT7986 */
--#define MT7986_NUM_CONTROLLER 1
--
--/* The calibration coefficient of sensor */
--#define MT7986_CALIBRATION 165
--
--struct mtk_thermal;
--
--struct thermal_bank_cfg {
-- unsigned int num_sensors;
-- const int *sensors;
--};
--
--struct mtk_thermal_bank {
-- struct mtk_thermal *mt;
-- int id;
--};
--
--struct mtk_thermal_data {
-- s32 num_banks;
-- s32 num_sensors;
-- s32 auxadc_channel;
-- const int *vts_index;
-- const int *sensor_mux_values;
-- const int *msr;
-- const int *adcpnp;
-- const int cali_val;
-- const int num_controller;
-- const int *controller_offset;
-- bool need_switch_bank;
-- struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
-- enum mtk_thermal_version version;
--};
--
--struct mtk_thermal {
-- struct device *dev;
-- void __iomem *thermal_base;
--
-- struct clk *clk_peri_therm;
-- struct clk *clk_auxadc;
-- /* lock: for getting and putting banks */
-- struct mutex lock;
--
-- /* Calibration values */
-- s32 adc_ge;
-- s32 adc_oe;
-- s32 degc_cali;
-- s32 o_slope;
-- s32 o_slope_sign;
-- s32 vts[MAX_NUM_VTS];
--
-- const struct mtk_thermal_data *conf;
-- struct mtk_thermal_bank banks[MAX_NUM_ZONES];
--
-- int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
--};
--
--/* MT8183 thermal sensor data */
--static const int mt8183_bank_data[MT8183_NUM_SENSORS] = {
-- MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB
--};
--
--static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = {
-- TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1
--};
--
--static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = {
-- TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1,
-- TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1
--};
--
--static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 };
--static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100};
--
--static const int mt8183_vts_index[MT8183_NUM_SENSORS] = {
-- VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB
--};
--
--/* MT8173 thermal sensor data */
--static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
-- { MT8173_TS2, MT8173_TS3 },
-- { MT8173_TS2, MT8173_TS4 },
-- { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
-- { MT8173_TS2 },
--};
--
--static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
-- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
--};
--
--static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
-- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
--};
--
--static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
--static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, };
--
--static const int mt8173_vts_index[MT8173_NUM_SENSORS] = {
-- VTS1, VTS2, VTS3, VTS4, VTSABB
--};
--
--/* MT2701 thermal sensor data */
--static const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
-- MT2701_TS1, MT2701_TS2, MT2701_TSABB
--};
--
--static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
-- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
--};
--
--static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
-- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
--};
--
--static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
--static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, };
--
--static const int mt2701_vts_index[MT2701_NUM_SENSORS] = {
-- VTS1, VTS2, VTS3
--};
--
--/* MT2712 thermal sensor data */
--static const int mt2712_bank_data[MT2712_NUM_SENSORS] = {
-- MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4
--};
--
--static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = {
-- TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
--};
--
--static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
-- TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
--};
--
--static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
--static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, };
--
--static const int mt2712_vts_index[MT2712_NUM_SENSORS] = {
-- VTS1, VTS2, VTS3, VTS4
--};
--
--/* MT7622 thermal sensor data */
--static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
--static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
--static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
--static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
--static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
--static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
--
--/* MT7986 thermal sensor data */
--static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, };
--static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
--static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
--static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
--static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
--static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
--
--/*
-- * The MT8173 thermal controller has four banks. Each bank can read up to
-- * four temperature sensors simultaneously. The MT8173 has a total of 5
-- * temperature sensors. We use each bank to measure a certain area of the
-- * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
-- * areas, hence is used in different banks.
-- *
-- * The thermal core only gets the maximum temperature of all banks, so
-- * the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data, and this indeed needs the temperatures of the individual banks
-- * for making better decisions.
-- */
--static const struct mtk_thermal_data mt8173_thermal_data = {
-- .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
-- .num_banks = MT8173_NUM_ZONES,
-- .num_sensors = MT8173_NUM_SENSORS,
-- .vts_index = mt8173_vts_index,
-- .cali_val = MT8173_CALIBRATION,
-- .num_controller = MT8173_NUM_CONTROLLER,
-- .controller_offset = mt8173_tc_offset,
-- .need_switch_bank = true,
-- .bank_data = {
-- {
-- .num_sensors = 2,
-- .sensors = mt8173_bank_data[0],
-- }, {
-- .num_sensors = 2,
-- .sensors = mt8173_bank_data[1],
-- }, {
-- .num_sensors = 3,
-- .sensors = mt8173_bank_data[2],
-- }, {
-- .num_sensors = 1,
-- .sensors = mt8173_bank_data[3],
-- },
-- },
-- .msr = mt8173_msr,
-- .adcpnp = mt8173_adcpnp,
-- .sensor_mux_values = mt8173_mux_values,
-- .version = MTK_THERMAL_V1,
--};
--
--/*
-- * The MT2701 thermal controller has one bank, which can read up to
-- * three temperature sensors simultaneously. The MT2701 has a total of 3
-- * temperature sensors.
-- *
-- * The thermal core only gets the maximum temperature of this one bank,
-- * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data.
-- */
--static const struct mtk_thermal_data mt2701_thermal_data = {
-- .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
-- .num_banks = 1,
-- .num_sensors = MT2701_NUM_SENSORS,
-- .vts_index = mt2701_vts_index,
-- .cali_val = MT2701_CALIBRATION,
-- .num_controller = MT2701_NUM_CONTROLLER,
-- .controller_offset = mt2701_tc_offset,
-- .need_switch_bank = true,
-- .bank_data = {
-- {
-- .num_sensors = 3,
-- .sensors = mt2701_bank_data,
-- },
-- },
-- .msr = mt2701_msr,
-- .adcpnp = mt2701_adcpnp,
-- .sensor_mux_values = mt2701_mux_values,
-- .version = MTK_THERMAL_V1,
--};
--
--/*
-- * The MT2712 thermal controller has one bank, which can read up to
-- * four temperature sensors simultaneously. The MT2712 has a total of 4
-- * temperature sensors.
-- *
-- * The thermal core only gets the maximum temperature of this one bank,
-- * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data.
-- */
--static const struct mtk_thermal_data mt2712_thermal_data = {
-- .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL,
-- .num_banks = 1,
-- .num_sensors = MT2712_NUM_SENSORS,
-- .vts_index = mt2712_vts_index,
-- .cali_val = MT2712_CALIBRATION,
-- .num_controller = MT2712_NUM_CONTROLLER,
-- .controller_offset = mt2712_tc_offset,
-- .need_switch_bank = true,
-- .bank_data = {
-- {
-- .num_sensors = 4,
-- .sensors = mt2712_bank_data,
-- },
-- },
-- .msr = mt2712_msr,
-- .adcpnp = mt2712_adcpnp,
-- .sensor_mux_values = mt2712_mux_values,
-- .version = MTK_THERMAL_V1,
--};
--
--/*
-- * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
-- * access.
-- */
--static const struct mtk_thermal_data mt7622_thermal_data = {
-- .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
-- .num_banks = MT7622_NUM_ZONES,
-- .num_sensors = MT7622_NUM_SENSORS,
-- .vts_index = mt7622_vts_index,
-- .cali_val = MT7622_CALIBRATION,
-- .num_controller = MT7622_NUM_CONTROLLER,
-- .controller_offset = mt7622_tc_offset,
-- .need_switch_bank = true,
-- .bank_data = {
-- {
-- .num_sensors = 1,
-- .sensors = mt7622_bank_data,
-- },
-- },
-- .msr = mt7622_msr,
-- .adcpnp = mt7622_adcpnp,
-- .sensor_mux_values = mt7622_mux_values,
-- .version = MTK_THERMAL_V2,
--};
--
--/*
-- * The MT8183 thermal controller has one bank for the current SW framework.
-- * The MT8183 has a total of 6 temperature sensors.
-- * There are two thermal controller to control the six sensor.
-- * The first one bind 2 sensor, and the other bind 4 sensors.
-- * The thermal core only gets the maximum temperature of all sensor, so
-- * the bank concept wouldn't be necessary here. However, the SVS (Smart
-- * Voltage Scaling) unit makes its decisions based on the same bank
-- * data, and this indeed needs the temperatures of the individual banks
-- * for making better decisions.
-- */
--static const struct mtk_thermal_data mt8183_thermal_data = {
-- .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
-- .num_banks = MT8183_NUM_ZONES,
-- .num_sensors = MT8183_NUM_SENSORS,
-- .vts_index = mt8183_vts_index,
-- .cali_val = MT8183_CALIBRATION,
-- .num_controller = MT8183_NUM_CONTROLLER,
-- .controller_offset = mt8183_tc_offset,
-- .need_switch_bank = false,
-- .bank_data = {
-- {
-- .num_sensors = 6,
-- .sensors = mt8183_bank_data,
-- },
-- },
--
-- .msr = mt8183_msr,
-- .adcpnp = mt8183_adcpnp,
-- .sensor_mux_values = mt8183_mux_values,
-- .version = MTK_THERMAL_V1,
--};
--
--/*
-- * MT7986 uses AUXADC Channel 11 for raw data access.
-- */
--static const struct mtk_thermal_data mt7986_thermal_data = {
-- .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL,
-- .num_banks = MT7986_NUM_ZONES,
-- .num_sensors = MT7986_NUM_SENSORS,
-- .vts_index = mt7986_vts_index,
-- .cali_val = MT7986_CALIBRATION,
-- .num_controller = MT7986_NUM_CONTROLLER,
-- .controller_offset = mt7986_tc_offset,
-- .need_switch_bank = true,
-- .bank_data = {
-- {
-- .num_sensors = 1,
-- .sensors = mt7986_bank_data,
-- },
-- },
-- .msr = mt7986_msr,
-- .adcpnp = mt7986_adcpnp,
-- .sensor_mux_values = mt7986_mux_values,
-- .version = MTK_THERMAL_V3,
--};
--
--/**
-- * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
-- * @mt: The thermal controller
-- * @sensno: sensor number
-- * @raw: raw ADC value
-- *
-- * This converts the raw ADC value to mcelsius using the SoC specific
-- * calibration constants
-- */
--static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
--{
-- s32 tmp;
--
-- raw &= 0xfff;
--
-- tmp = 203450520 << 3;
-- tmp /= mt->conf->cali_val + mt->o_slope;
-- tmp /= 10000 + mt->adc_ge;
-- tmp *= raw - mt->vts[sensno] - 3350;
-- tmp >>= 3;
--
-- return mt->degc_cali * 500 - tmp;
--}
--
--static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
--{
-- s32 format_1;
-- s32 format_2;
-- s32 g_oe;
-- s32 g_gain;
-- s32 g_x_roomt;
-- s32 tmp;
--
-- if (raw == 0)
-- return 0;
--
-- raw &= 0xfff;
-- g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
-- g_oe = mt->adc_oe - 512;
-- format_1 = mt->vts[VTS2] + 3105 - g_oe;
-- format_2 = (mt->degc_cali * 10) >> 1;
-- g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
--
-- tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
-- tmp = tmp * 10 * 100 / 11;
--
-- if (mt->o_slope_sign == 0)
-- tmp = tmp / (165 - mt->o_slope);
-- else
-- tmp = tmp / (165 + mt->o_slope);
--
-- return (format_2 - tmp) * 100;
--}
--
--static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw)
--{
-- s32 tmp;
--
-- if (raw == 0)
-- return 0;
--
-- raw &= 0xfff;
-- tmp = 100000 * 15 / 16 * 10000;
-- tmp /= 4096 - 512 + mt->adc_ge;
-- tmp /= 1490;
-- tmp *= raw - mt->vts[sensno] - 2900;
--
-- return mt->degc_cali * 500 - tmp;
--}
--
--/**
-- * mtk_thermal_get_bank - get bank
-- * @bank: The bank
-- *
-- * The bank registers are banked, we have to select a bank in the
-- * PTPCORESEL register to access it.
-- */
--static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
--{
-- struct mtk_thermal *mt = bank->mt;
-- u32 val;
--
-- if (mt->conf->need_switch_bank) {
-- mutex_lock(&mt->lock);
--
-- val = readl(mt->thermal_base + PTPCORESEL);
-- val &= ~0xf;
-- val |= bank->id;
-- writel(val, mt->thermal_base + PTPCORESEL);
-- }
--}
--
--/**
-- * mtk_thermal_put_bank - release bank
-- * @bank: The bank
-- *
-- * release a bank previously taken with mtk_thermal_get_bank,
-- */
--static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
--{
-- struct mtk_thermal *mt = bank->mt;
--
-- if (mt->conf->need_switch_bank)
-- mutex_unlock(&mt->lock);
--}
--
--/**
-- * mtk_thermal_bank_temperature - get the temperature of a bank
-- * @bank: The bank
-- *
-- * The temperature of a bank is considered the maximum temperature of
-- * the sensors associated to the bank.
-- */
--static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
--{
-- struct mtk_thermal *mt = bank->mt;
-- const struct mtk_thermal_data *conf = mt->conf;
-- int i, temp = INT_MIN, max = INT_MIN;
-- u32 raw;
--
-- for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-- raw = readl(mt->thermal_base + conf->msr[i]);
--
-- temp = mt->raw_to_mcelsius(
-- mt, conf->bank_data[bank->id].sensors[i], raw);
--
--
-- /*
-- * The first read of a sensor often contains very high bogus
-- * temperature value. Filter these out so that the system does
-- * not immediately shut down.
-- */
-- if (temp > 200000)
-- temp = 0;
--
-- if (temp > max)
-- max = temp;
-- }
--
-- return max;
--}
--
--static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
--{
-- struct mtk_thermal *mt = tz->devdata;
-- int i;
-- int tempmax = INT_MIN;
--
-- for (i = 0; i < mt->conf->num_banks; i++) {
-- struct mtk_thermal_bank *bank = &mt->banks[i];
--
-- mtk_thermal_get_bank(bank);
--
-- tempmax = max(tempmax, mtk_thermal_bank_temperature(bank));
--
-- mtk_thermal_put_bank(bank);
-- }
--
-- *temperature = tempmax;
--
-- return 0;
--}
--
--static const struct thermal_zone_device_ops mtk_thermal_ops = {
-- .get_temp = mtk_read_temp,
--};
--
--static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
-- u32 apmixed_phys_base, u32 auxadc_phys_base,
-- int ctrl_id)
--{
-- struct mtk_thermal_bank *bank = &mt->banks[num];
-- const struct mtk_thermal_data *conf = mt->conf;
-- int i;
--
-- int offset = mt->conf->controller_offset[ctrl_id];
-- void __iomem *controller_base = mt->thermal_base + offset;
--
-- bank->id = num;
-- bank->mt = mt;
--
-- mtk_thermal_get_bank(bank);
--
-- /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
-- writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1);
--
-- /*
-- * filt interval is 1 * 46.540us = 46.54us,
-- * sen interval is 429 * 46.540us = 19.96ms
-- */
-- writel(TEMP_MONCTL2_FILTER_INTERVAL(1) |
-- TEMP_MONCTL2_SENSOR_INTERVAL(429),
-- controller_base + TEMP_MONCTL2);
--
-- /* poll is set to 10u */
-- writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
-- controller_base + TEMP_AHBPOLL);
--
-- /* temperature sampling control, 1 sample */
-- writel(0x0, controller_base + TEMP_MSRCTL0);
--
-- /* exceed this polling time, IRQ would be inserted */
-- writel(0xffffffff, controller_base + TEMP_AHBTO);
--
-- /* number of interrupts per event, 1 is enough */
-- writel(0x0, controller_base + TEMP_MONIDET0);
-- writel(0x0, controller_base + TEMP_MONIDET1);
--
-- /*
-- * The MT8173 thermal controller does not have its own ADC. Instead it
-- * uses AHB bus accesses to control the AUXADC. To do this the thermal
-- * controller has to be programmed with the physical addresses of the
-- * AUXADC registers and with the various bit positions in the AUXADC.
-- * Also the thermal controller controls a mux in the APMIXEDSYS register
-- * space.
-- */
--
-- /*
-- * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
-- * automatically by hw
-- */
-- writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX);
--
-- /* AHB address for auxadc mux selection */
-- writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
-- controller_base + TEMP_ADCMUXADDR);
--
-- if (mt->conf->version == MTK_THERMAL_V1) {
-- /* AHB address for pnp sensor mux selection */
-- writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
-- controller_base + TEMP_PNPMUXADDR);
-- }
--
-- /* AHB value for auxadc enable */
-- writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
--
-- /* AHB address for auxadc enable (channel 0 immediate mode selected) */
-- writel(auxadc_phys_base + AUXADC_CON1_SET_V,
-- controller_base + TEMP_ADCENADDR);
--
-- /* AHB address for auxadc valid bit */
-- writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
-- controller_base + TEMP_ADCVALIDADDR);
--
-- /* AHB address for auxadc voltage output */
-- writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
-- controller_base + TEMP_ADCVOLTADDR);
--
-- /* read valid & voltage are at the same register */
-- writel(0x0, controller_base + TEMP_RDCTRL);
--
-- /* indicate where the valid bit is */
-- writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
-- controller_base + TEMP_ADCVALIDMASK);
--
-- /* no shift */
-- writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT);
--
-- /* enable auxadc mux write transaction */
-- writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-- controller_base + TEMP_ADCWRITECTRL);
--
-- for (i = 0; i < conf->bank_data[num].num_sensors; i++)
-- writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
-- mt->thermal_base + conf->adcpnp[i]);
--
-- writel((1 << conf->bank_data[num].num_sensors) - 1,
-- controller_base + TEMP_MONCTL0);
--
-- writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
-- TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-- controller_base + TEMP_ADCWRITECTRL);
--
-- mtk_thermal_put_bank(bank);
--}
--
--static u64 of_get_phys_base(struct device_node *np)
--{
-- u64 size64;
-- const __be32 *regaddr_p;
--
-- regaddr_p = of_get_address(np, 0, &size64, NULL);
-- if (!regaddr_p)
-- return OF_BAD_ADDR;
--
-- return of_translate_address(np, regaddr_p);
--}
--
--static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
--{
-- int i;
--
-- if (!(buf[0] & CALIB_BUF0_VALID_V1))
-- return -EINVAL;
--
-- mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
--
-- for (i = 0; i < mt->conf->num_sensors; i++) {
-- switch (mt->conf->vts_index[i]) {
-- case VTS1:
-- mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
-- break;
-- case VTS2:
-- mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
-- break;
-- case VTS3:
-- mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
-- break;
-- case VTS4:
-- mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
-- break;
-- case VTS5:
-- mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
-- break;
-- case VTSABB:
-- mt->vts[VTSABB] =
-- CALIB_BUF2_VTS_TSABB_V1(buf[2]);
-- break;
-- default:
-- break;
-- }
-- }
--
-- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
-- if (CALIB_BUF1_ID_V1(buf[1]) &
-- CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
-- mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
-- else
-- mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
--
-- return 0;
--}
--
--static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
--{
-- if (!CALIB_BUF1_VALID_V2(buf[1]))
-- return -EINVAL;
--
-- mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
-- mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
-- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
-- mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
-- mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
-- mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
-- mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
-- mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
--
-- return 0;
--}
--
--static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf)
--{
-- if (!CALIB_BUF1_VALID_V3(buf[1]))
-- return -EINVAL;
--
-- mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]);
-- mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]);
-- mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]);
-- mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]);
-- mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]);
-- mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]);
-- mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]);
--
-- if (CALIB_BUF1_ID_V3(buf[1]) == 0)
-- mt->o_slope = 0;
--
-- return 0;
--}
--
--static int mtk_thermal_get_calibration_data(struct device *dev,
-- struct mtk_thermal *mt)
--{
-- struct nvmem_cell *cell;
-- u32 *buf;
-- size_t len;
-- int i, ret = 0;
--
-- /* Start with default values */
-- mt->adc_ge = 512;
-- mt->adc_oe = 512;
-- for (i = 0; i < mt->conf->num_sensors; i++)
-- mt->vts[i] = 260;
-- mt->degc_cali = 40;
-- mt->o_slope = 0;
--
-- cell = nvmem_cell_get(dev, "calibration-data");
-- if (IS_ERR(cell)) {
-- if (PTR_ERR(cell) == -EPROBE_DEFER)
-- return PTR_ERR(cell);
-- return 0;
-- }
--
-- buf = (u32 *)nvmem_cell_read(cell, &len);
--
-- nvmem_cell_put(cell);
--
-- if (IS_ERR(buf))
-- return PTR_ERR(buf);
--
-- if (len < 3 * sizeof(u32)) {
-- dev_warn(dev, "invalid calibration data\n");
-- ret = -EINVAL;
-- goto out;
-- }
--
-- switch (mt->conf->version) {
-- case MTK_THERMAL_V1:
-- ret = mtk_thermal_extract_efuse_v1(mt, buf);
-- break;
-- case MTK_THERMAL_V2:
-- ret = mtk_thermal_extract_efuse_v2(mt, buf);
-- break;
-- case MTK_THERMAL_V3:
-- ret = mtk_thermal_extract_efuse_v3(mt, buf);
-- break;
-- default:
-- ret = -EINVAL;
-- break;
-- }
--
-- if (ret) {
-- dev_info(dev, "Device not calibrated, using default calibration values\n");
-- ret = 0;
-- }
--
--out:
-- kfree(buf);
--
-- return ret;
--}
--
--static const struct of_device_id mtk_thermal_of_match[] = {
-- {
-- .compatible = "mediatek,mt8173-thermal",
-- .data = (void *)&mt8173_thermal_data,
-- },
-- {
-- .compatible = "mediatek,mt2701-thermal",
-- .data = (void *)&mt2701_thermal_data,
-- },
-- {
-- .compatible = "mediatek,mt2712-thermal",
-- .data = (void *)&mt2712_thermal_data,
-- },
-- {
-- .compatible = "mediatek,mt7622-thermal",
-- .data = (void *)&mt7622_thermal_data,
-- },
-- {
-- .compatible = "mediatek,mt7986-thermal",
-- .data = (void *)&mt7986_thermal_data,
-- },
-- {
-- .compatible = "mediatek,mt8183-thermal",
-- .data = (void *)&mt8183_thermal_data,
-- }, {
-- },
--};
--MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
--
--static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
--{
-- int tmp;
--
-- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-- tmp &= ~(0x37);
-- tmp |= 0x1;
-- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
-- udelay(200);
--}
--
--static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
-- void __iomem *auxadc_base)
--{
-- int tmp;
--
-- writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
-- writel(0x1, mt->thermal_base + TEMP_MONCTL0);
-- tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
-- writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
--}
--
--static int mtk_thermal_probe(struct platform_device *pdev)
--{
-- int ret, i, ctrl_id;
-- struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
-- struct mtk_thermal *mt;
-- u64 auxadc_phys_base, apmixed_phys_base;
-- struct thermal_zone_device *tzdev;
-- void __iomem *apmixed_base, *auxadc_base;
--
-- mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
-- if (!mt)
-- return -ENOMEM;
--
-- mt->conf = of_device_get_match_data(&pdev->dev);
--
-- mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
-- if (IS_ERR(mt->clk_peri_therm))
-- return PTR_ERR(mt->clk_peri_therm);
--
-- mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
-- if (IS_ERR(mt->clk_auxadc))
-- return PTR_ERR(mt->clk_auxadc);
--
-- mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-- if (IS_ERR(mt->thermal_base))
-- return PTR_ERR(mt->thermal_base);
--
-- ret = mtk_thermal_get_calibration_data(&pdev->dev, mt);
-- if (ret)
-- return ret;
--
-- mutex_init(&mt->lock);
--
-- mt->dev = &pdev->dev;
--
-- auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);
-- if (!auxadc) {
-- dev_err(&pdev->dev, "missing auxadc node\n");
-- return -ENODEV;
-- }
--
-- auxadc_base = of_iomap(auxadc, 0);
-- auxadc_phys_base = of_get_phys_base(auxadc);
--
-- of_node_put(auxadc);
--
-- if (auxadc_phys_base == OF_BAD_ADDR) {
-- dev_err(&pdev->dev, "Can't get auxadc phys address\n");
-- return -EINVAL;
-- }
--
-- apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0);
-- if (!apmixedsys) {
-- dev_err(&pdev->dev, "missing apmixedsys node\n");
-- return -ENODEV;
-- }
--
-- apmixed_base = of_iomap(apmixedsys, 0);
-- apmixed_phys_base = of_get_phys_base(apmixedsys);
--
-- of_node_put(apmixedsys);
--
-- if (apmixed_phys_base == OF_BAD_ADDR) {
-- dev_err(&pdev->dev, "Can't get auxadc phys address\n");
-- return -EINVAL;
-- }
--
-- ret = device_reset_optional(&pdev->dev);
-- if (ret)
-- return ret;
--
-- ret = clk_prepare_enable(mt->clk_auxadc);
-- if (ret) {
-- dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
-- return ret;
-- }
--
-- ret = clk_prepare_enable(mt->clk_peri_therm);
-- if (ret) {
-- dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
-- goto err_disable_clk_auxadc;
-- }
--
-- if (mt->conf->version != MTK_THERMAL_V1) {
-- mtk_thermal_turn_on_buffer(apmixed_base);
-- mtk_thermal_release_periodic_ts(mt, auxadc_base);
-- }
--
-- if (mt->conf->version == MTK_THERMAL_V1)
-- mt->raw_to_mcelsius = raw_to_mcelsius_v1;
-- else if (mt->conf->version == MTK_THERMAL_V2)
-- mt->raw_to_mcelsius = raw_to_mcelsius_v2;
-- else
-- mt->raw_to_mcelsius = raw_to_mcelsius_v3;
--
-- for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
-- for (i = 0; i < mt->conf->num_banks; i++)
-- mtk_thermal_init_bank(mt, i, apmixed_phys_base,
-- auxadc_phys_base, ctrl_id);
--
-- platform_set_drvdata(pdev, mt);
--
-- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-- &mtk_thermal_ops);
-- if (IS_ERR(tzdev)) {
-- ret = PTR_ERR(tzdev);
-- goto err_disable_clk_peri_therm;
-- }
--
-- ret = devm_thermal_add_hwmon_sysfs(tzdev);
-- if (ret)
-- dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
--
-- return 0;
--
--err_disable_clk_peri_therm:
-- clk_disable_unprepare(mt->clk_peri_therm);
--err_disable_clk_auxadc:
-- clk_disable_unprepare(mt->clk_auxadc);
--
-- return ret;
--}
--
--static int mtk_thermal_remove(struct platform_device *pdev)
--{
-- struct mtk_thermal *mt = platform_get_drvdata(pdev);
--
-- clk_disable_unprepare(mt->clk_peri_therm);
-- clk_disable_unprepare(mt->clk_auxadc);
--
-- return 0;
--}
--
--static struct platform_driver mtk_thermal_driver = {
-- .probe = mtk_thermal_probe,
-- .remove = mtk_thermal_remove,
-- .driver = {
-- .name = "mtk-thermal",
-- .of_match_table = mtk_thermal_of_match,
-- },
--};
--
--module_platform_driver(mtk_thermal_driver);
--
--MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
--MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>");
--MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
--MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
--MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
--MODULE_DESCRIPTION("Mediatek thermal driver");
--MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -0,0 +1,1254 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2015 MediaTek Inc.
-+ * Author: Hanyi Wu <hanyi.wu@mediatek.com>
-+ * Sascha Hauer <s.hauer@pengutronix.de>
-+ * Dawei Chien <dawei.chien@mediatek.com>
-+ * Louis Yu <louis.yu@mediatek.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/thermal.h>
-+#include <linux/reset.h>
-+#include <linux/types.h>
-+
-+#include "../thermal_hwmon.h"
-+
-+/* AUXADC Registers */
-+#define AUXADC_CON1_SET_V 0x008
-+#define AUXADC_CON1_CLR_V 0x00c
-+#define AUXADC_CON2_V 0x010
-+#define AUXADC_DATA(channel) (0x14 + (channel) * 4)
-+
-+#define APMIXED_SYS_TS_CON1 0x604
-+
-+/* Thermal Controller Registers */
-+#define TEMP_MONCTL0 0x000
-+#define TEMP_MONCTL1 0x004
-+#define TEMP_MONCTL2 0x008
-+#define TEMP_MONIDET0 0x014
-+#define TEMP_MONIDET1 0x018
-+#define TEMP_MSRCTL0 0x038
-+#define TEMP_MSRCTL1 0x03c
-+#define TEMP_AHBPOLL 0x040
-+#define TEMP_AHBTO 0x044
-+#define TEMP_ADCPNP0 0x048
-+#define TEMP_ADCPNP1 0x04c
-+#define TEMP_ADCPNP2 0x050
-+#define TEMP_ADCPNP3 0x0b4
-+
-+#define TEMP_ADCMUX 0x054
-+#define TEMP_ADCEN 0x060
-+#define TEMP_PNPMUXADDR 0x064
-+#define TEMP_ADCMUXADDR 0x068
-+#define TEMP_ADCENADDR 0x074
-+#define TEMP_ADCVALIDADDR 0x078
-+#define TEMP_ADCVOLTADDR 0x07c
-+#define TEMP_RDCTRL 0x080
-+#define TEMP_ADCVALIDMASK 0x084
-+#define TEMP_ADCVOLTAGESHIFT 0x088
-+#define TEMP_ADCWRITECTRL 0x08c
-+#define TEMP_MSR0 0x090
-+#define TEMP_MSR1 0x094
-+#define TEMP_MSR2 0x098
-+#define TEMP_MSR3 0x0B8
-+
-+#define TEMP_SPARE0 0x0f0
-+
-+#define TEMP_ADCPNP0_1 0x148
-+#define TEMP_ADCPNP1_1 0x14c
-+#define TEMP_ADCPNP2_1 0x150
-+#define TEMP_MSR0_1 0x190
-+#define TEMP_MSR1_1 0x194
-+#define TEMP_MSR2_1 0x198
-+#define TEMP_ADCPNP3_1 0x1b4
-+#define TEMP_MSR3_1 0x1B8
-+
-+#define PTPCORESEL 0x400
-+
-+#define TEMP_MONCTL1_PERIOD_UNIT(x) ((x) & 0x3ff)
-+
-+#define TEMP_MONCTL2_FILTER_INTERVAL(x) (((x) & 0x3ff) << 16)
-+#define TEMP_MONCTL2_SENSOR_INTERVAL(x) ((x) & 0x3ff)
-+
-+#define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x) (x)
-+
-+#define TEMP_ADCWRITECTRL_ADC_PNP_WRITE BIT(0)
-+#define TEMP_ADCWRITECTRL_ADC_MUX_WRITE BIT(1)
-+
-+#define TEMP_ADCVALIDMASK_VALID_HIGH BIT(5)
-+#define TEMP_ADCVALIDMASK_VALID_POS(bit) (bit)
-+
-+/* MT8173 thermal sensors */
-+#define MT8173_TS1 0
-+#define MT8173_TS2 1
-+#define MT8173_TS3 2
-+#define MT8173_TS4 3
-+#define MT8173_TSABB 4
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT8173_TEMP_AUXADC_CHANNEL 11
-+
-+/* The total number of temperature sensors in the MT8173 */
-+#define MT8173_NUM_SENSORS 5
-+
-+/* The number of banks in the MT8173 */
-+#define MT8173_NUM_ZONES 4
-+
-+/* The number of sensing points per bank */
-+#define MT8173_NUM_SENSORS_PER_ZONE 4
-+
-+/* The number of controller in the MT8173 */
-+#define MT8173_NUM_CONTROLLER 1
-+
-+/* The calibration coefficient of sensor */
-+#define MT8173_CALIBRATION 165
-+
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
-+ * MT8183 has 6 sensors and needs 6 VTS calibration data.
-+ * MT8173 has 5 sensors and needs 5 VTS calibration data.
-+ * MT2701 has 3 sensors and needs 3 VTS calibration data.
-+ * MT2712 has 4 sensors and needs 4 VTS calibration data.
-+ */
-+#define CALIB_BUF0_VALID_V1 BIT(0)
-+#define CALIB_BUF1_ADC_GE_V1(x) (((x) >> 22) & 0x3ff)
-+#define CALIB_BUF0_VTS_TS1_V1(x) (((x) >> 17) & 0x1ff)
-+#define CALIB_BUF0_VTS_TS2_V1(x) (((x) >> 8) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS3_V1(x) (((x) >> 0) & 0x1ff)
-+#define CALIB_BUF2_VTS_TS4_V1(x) (((x) >> 23) & 0x1ff)
-+#define CALIB_BUF2_VTS_TS5_V1(x) (((x) >> 5) & 0x1ff)
-+#define CALIB_BUF2_VTS_TSABB_V1(x) (((x) >> 14) & 0x1ff)
-+#define CALIB_BUF0_DEGC_CALI_V1(x) (((x) >> 1) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V1(x) (((x) >> 26) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_SIGN_V1(x) (((x) >> 7) & 0x1)
-+#define CALIB_BUF1_ID_V1(x) (((x) >> 9) & 0x1)
-+
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros could be used for MT7622.
-+ */
-+#define CALIB_BUF0_ADC_OE_V2(x) (((x) >> 22) & 0x3ff)
-+#define CALIB_BUF0_ADC_GE_V2(x) (((x) >> 12) & 0x3ff)
-+#define CALIB_BUF0_DEGC_CALI_V2(x) (((x) >> 6) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V2(x) (((x) >> 0) & 0x3f)
-+#define CALIB_BUF1_VTS_TS1_V2(x) (((x) >> 23) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS2_V2(x) (((x) >> 14) & 0x1ff)
-+#define CALIB_BUF1_VTS_TSABB_V2(x) (((x) >> 5) & 0x1ff)
-+#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1)
-+#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1)
-+
-+/*
-+ * Layout of the fuses providing the calibration data
-+ * These macros can be used for MT7981 and MT7986.
-+ */
-+#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff)
-+#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f)
-+#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f)
-+#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff)
-+#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff)
-+#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff)
-+#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1)
-+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1)
-+#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1)
-+
-+enum {
-+ VTS1,
-+ VTS2,
-+ VTS3,
-+ VTS4,
-+ VTS5,
-+ VTSABB,
-+ MAX_NUM_VTS,
-+};
-+
-+enum mtk_thermal_version {
-+ MTK_THERMAL_V1 = 1,
-+ MTK_THERMAL_V2,
-+ MTK_THERMAL_V3,
-+};
-+
-+/* MT2701 thermal sensors */
-+#define MT2701_TS1 0
-+#define MT2701_TS2 1
-+#define MT2701_TSABB 2
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT2701_TEMP_AUXADC_CHANNEL 11
-+
-+/* The total number of temperature sensors in the MT2701 */
-+#define MT2701_NUM_SENSORS 3
-+
-+/* The number of sensing points per bank */
-+#define MT2701_NUM_SENSORS_PER_ZONE 3
-+
-+/* The number of controller in the MT2701 */
-+#define MT2701_NUM_CONTROLLER 1
-+
-+/* The calibration coefficient of sensor */
-+#define MT2701_CALIBRATION 165
-+
-+/* MT2712 thermal sensors */
-+#define MT2712_TS1 0
-+#define MT2712_TS2 1
-+#define MT2712_TS3 2
-+#define MT2712_TS4 3
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT2712_TEMP_AUXADC_CHANNEL 11
-+
-+/* The total number of temperature sensors in the MT2712 */
-+#define MT2712_NUM_SENSORS 4
-+
-+/* The number of sensing points per bank */
-+#define MT2712_NUM_SENSORS_PER_ZONE 4
-+
-+/* The number of controller in the MT2712 */
-+#define MT2712_NUM_CONTROLLER 1
-+
-+/* The calibration coefficient of sensor */
-+#define MT2712_CALIBRATION 165
-+
-+#define MT7622_TEMP_AUXADC_CHANNEL 11
-+#define MT7622_NUM_SENSORS 1
-+#define MT7622_NUM_ZONES 1
-+#define MT7622_NUM_SENSORS_PER_ZONE 1
-+#define MT7622_TS1 0
-+#define MT7622_NUM_CONTROLLER 1
-+
-+/* The maximum number of banks */
-+#define MAX_NUM_ZONES 8
-+
-+/* The calibration coefficient of sensor */
-+#define MT7622_CALIBRATION 165
-+
-+/* MT8183 thermal sensors */
-+#define MT8183_TS1 0
-+#define MT8183_TS2 1
-+#define MT8183_TS3 2
-+#define MT8183_TS4 3
-+#define MT8183_TS5 4
-+#define MT8183_TSABB 5
-+
-+/* AUXADC channel is used for the temperature sensors */
-+#define MT8183_TEMP_AUXADC_CHANNEL 11
-+
-+/* The total number of temperature sensors in the MT8183 */
-+#define MT8183_NUM_SENSORS 6
-+
-+/* The number of banks in the MT8183 */
-+#define MT8183_NUM_ZONES 1
-+
-+/* The number of sensing points per bank */
-+#define MT8183_NUM_SENSORS_PER_ZONE 6
-+
-+/* The number of controller in the MT8183 */
-+#define MT8183_NUM_CONTROLLER 2
-+
-+/* The calibration coefficient of sensor */
-+#define MT8183_CALIBRATION 153
-+
-+/* AUXADC channel 11 is used for the temperature sensors */
-+#define MT7986_TEMP_AUXADC_CHANNEL 11
-+
-+/* The total number of temperature sensors in the MT7986 */
-+#define MT7986_NUM_SENSORS 1
-+
-+/* The number of banks in the MT7986 */
-+#define MT7986_NUM_ZONES 1
-+
-+/* The number of sensing points per bank */
-+#define MT7986_NUM_SENSORS_PER_ZONE 1
-+
-+/* MT7986 thermal sensors */
-+#define MT7986_TS1 0
-+
-+/* The number of controller in the MT7986 */
-+#define MT7986_NUM_CONTROLLER 1
-+
-+/* The calibration coefficient of sensor */
-+#define MT7986_CALIBRATION 165
-+
-+struct mtk_thermal;
-+
-+struct thermal_bank_cfg {
-+ unsigned int num_sensors;
-+ const int *sensors;
-+};
-+
-+struct mtk_thermal_bank {
-+ struct mtk_thermal *mt;
-+ int id;
-+};
-+
-+struct mtk_thermal_data {
-+ s32 num_banks;
-+ s32 num_sensors;
-+ s32 auxadc_channel;
-+ const int *vts_index;
-+ const int *sensor_mux_values;
-+ const int *msr;
-+ const int *adcpnp;
-+ const int cali_val;
-+ const int num_controller;
-+ const int *controller_offset;
-+ bool need_switch_bank;
-+ struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
-+ enum mtk_thermal_version version;
-+};
-+
-+struct mtk_thermal {
-+ struct device *dev;
-+ void __iomem *thermal_base;
-+
-+ struct clk *clk_peri_therm;
-+ struct clk *clk_auxadc;
-+ /* lock: for getting and putting banks */
-+ struct mutex lock;
-+
-+ /* Calibration values */
-+ s32 adc_ge;
-+ s32 adc_oe;
-+ s32 degc_cali;
-+ s32 o_slope;
-+ s32 o_slope_sign;
-+ s32 vts[MAX_NUM_VTS];
-+
-+ const struct mtk_thermal_data *conf;
-+ struct mtk_thermal_bank banks[MAX_NUM_ZONES];
-+
-+ int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
-+};
-+
-+/* MT8183 thermal sensor data */
-+static const int mt8183_bank_data[MT8183_NUM_SENSORS] = {
-+ MT8183_TS1, MT8183_TS2, MT8183_TS3, MT8183_TS4, MT8183_TS5, MT8183_TSABB
-+};
-+
-+static const int mt8183_msr[MT8183_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_MSR0_1, TEMP_MSR1_1, TEMP_MSR2_1, TEMP_MSR1, TEMP_MSR0, TEMP_MSR3_1
-+};
-+
-+static const int mt8183_adcpnp[MT8183_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_ADCPNP0_1, TEMP_ADCPNP1_1, TEMP_ADCPNP2_1,
-+ TEMP_ADCPNP1, TEMP_ADCPNP0, TEMP_ADCPNP3_1
-+};
-+
-+static const int mt8183_mux_values[MT8183_NUM_SENSORS] = { 0, 1, 2, 3, 4, 0 };
-+static const int mt8183_tc_offset[MT8183_NUM_CONTROLLER] = {0x0, 0x100};
-+
-+static const int mt8183_vts_index[MT8183_NUM_SENSORS] = {
-+ VTS1, VTS2, VTS3, VTS4, VTS5, VTSABB
-+};
-+
-+/* MT8173 thermal sensor data */
-+static const int mt8173_bank_data[MT8173_NUM_ZONES][3] = {
-+ { MT8173_TS2, MT8173_TS3 },
-+ { MT8173_TS2, MT8173_TS4 },
-+ { MT8173_TS1, MT8173_TS2, MT8173_TSABB },
-+ { MT8173_TS2 },
-+};
-+
-+static const int mt8173_msr[MT8173_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
-+};
-+
-+static const int mt8173_adcpnp[MT8173_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
-+};
-+
-+static const int mt8173_mux_values[MT8173_NUM_SENSORS] = { 0, 1, 2, 3, 16 };
-+static const int mt8173_tc_offset[MT8173_NUM_CONTROLLER] = { 0x0, };
-+
-+static const int mt8173_vts_index[MT8173_NUM_SENSORS] = {
-+ VTS1, VTS2, VTS3, VTS4, VTSABB
-+};
-+
-+/* MT2701 thermal sensor data */
-+static const int mt2701_bank_data[MT2701_NUM_SENSORS] = {
-+ MT2701_TS1, MT2701_TS2, MT2701_TSABB
-+};
-+
-+static const int mt2701_msr[MT2701_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
-+};
-+
-+static const int mt2701_adcpnp[MT2701_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
-+};
-+
-+static const int mt2701_mux_values[MT2701_NUM_SENSORS] = { 0, 1, 16 };
-+static const int mt2701_tc_offset[MT2701_NUM_CONTROLLER] = { 0x0, };
-+
-+static const int mt2701_vts_index[MT2701_NUM_SENSORS] = {
-+ VTS1, VTS2, VTS3
-+};
-+
-+/* MT2712 thermal sensor data */
-+static const int mt2712_bank_data[MT2712_NUM_SENSORS] = {
-+ MT2712_TS1, MT2712_TS2, MT2712_TS3, MT2712_TS4
-+};
-+
-+static const int mt2712_msr[MT2712_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2, TEMP_MSR3
-+};
-+
-+static const int mt2712_adcpnp[MT2712_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2, TEMP_ADCPNP3
-+};
-+
-+static const int mt2712_mux_values[MT2712_NUM_SENSORS] = { 0, 1, 2, 3 };
-+static const int mt2712_tc_offset[MT2712_NUM_CONTROLLER] = { 0x0, };
-+
-+static const int mt2712_vts_index[MT2712_NUM_SENSORS] = {
-+ VTS1, VTS2, VTS3, VTS4
-+};
-+
-+/* MT7622 thermal sensor data */
-+static const int mt7622_bank_data[MT7622_NUM_SENSORS] = { MT7622_TS1, };
-+static const int mt7622_msr[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
-+static const int mt7622_adcpnp[MT7622_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
-+static const int mt7622_mux_values[MT7622_NUM_SENSORS] = { 0, };
-+static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
-+static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
-+
-+/* MT7986 thermal sensor data */
-+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, };
-+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
-+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
-+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
-+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
-+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
-+
-+/*
-+ * The MT8173 thermal controller has four banks. Each bank can read up to
-+ * four temperature sensors simultaneously. The MT8173 has a total of 5
-+ * temperature sensors. We use each bank to measure a certain area of the
-+ * SoC. Since TS2 is located centrally in the SoC it is influenced by multiple
-+ * areas, hence is used in different banks.
-+ *
-+ * The thermal core only gets the maximum temperature of all banks, so
-+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data, and this indeed needs the temperatures of the individual banks
-+ * for making better decisions.
-+ */
-+static const struct mtk_thermal_data mt8173_thermal_data = {
-+ .auxadc_channel = MT8173_TEMP_AUXADC_CHANNEL,
-+ .num_banks = MT8173_NUM_ZONES,
-+ .num_sensors = MT8173_NUM_SENSORS,
-+ .vts_index = mt8173_vts_index,
-+ .cali_val = MT8173_CALIBRATION,
-+ .num_controller = MT8173_NUM_CONTROLLER,
-+ .controller_offset = mt8173_tc_offset,
-+ .need_switch_bank = true,
-+ .bank_data = {
-+ {
-+ .num_sensors = 2,
-+ .sensors = mt8173_bank_data[0],
-+ }, {
-+ .num_sensors = 2,
-+ .sensors = mt8173_bank_data[1],
-+ }, {
-+ .num_sensors = 3,
-+ .sensors = mt8173_bank_data[2],
-+ }, {
-+ .num_sensors = 1,
-+ .sensors = mt8173_bank_data[3],
-+ },
-+ },
-+ .msr = mt8173_msr,
-+ .adcpnp = mt8173_adcpnp,
-+ .sensor_mux_values = mt8173_mux_values,
-+ .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * The MT2701 thermal controller has one bank, which can read up to
-+ * three temperature sensors simultaneously. The MT2701 has a total of 3
-+ * temperature sensors.
-+ *
-+ * The thermal core only gets the maximum temperature of this one bank,
-+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data.
-+ */
-+static const struct mtk_thermal_data mt2701_thermal_data = {
-+ .auxadc_channel = MT2701_TEMP_AUXADC_CHANNEL,
-+ .num_banks = 1,
-+ .num_sensors = MT2701_NUM_SENSORS,
-+ .vts_index = mt2701_vts_index,
-+ .cali_val = MT2701_CALIBRATION,
-+ .num_controller = MT2701_NUM_CONTROLLER,
-+ .controller_offset = mt2701_tc_offset,
-+ .need_switch_bank = true,
-+ .bank_data = {
-+ {
-+ .num_sensors = 3,
-+ .sensors = mt2701_bank_data,
-+ },
-+ },
-+ .msr = mt2701_msr,
-+ .adcpnp = mt2701_adcpnp,
-+ .sensor_mux_values = mt2701_mux_values,
-+ .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * The MT2712 thermal controller has one bank, which can read up to
-+ * four temperature sensors simultaneously. The MT2712 has a total of 4
-+ * temperature sensors.
-+ *
-+ * The thermal core only gets the maximum temperature of this one bank,
-+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data.
-+ */
-+static const struct mtk_thermal_data mt2712_thermal_data = {
-+ .auxadc_channel = MT2712_TEMP_AUXADC_CHANNEL,
-+ .num_banks = 1,
-+ .num_sensors = MT2712_NUM_SENSORS,
-+ .vts_index = mt2712_vts_index,
-+ .cali_val = MT2712_CALIBRATION,
-+ .num_controller = MT2712_NUM_CONTROLLER,
-+ .controller_offset = mt2712_tc_offset,
-+ .need_switch_bank = true,
-+ .bank_data = {
-+ {
-+ .num_sensors = 4,
-+ .sensors = mt2712_bank_data,
-+ },
-+ },
-+ .msr = mt2712_msr,
-+ .adcpnp = mt2712_adcpnp,
-+ .sensor_mux_values = mt2712_mux_values,
-+ .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * MT7622 have only one sensing point which uses AUXADC Channel 11 for raw data
-+ * access.
-+ */
-+static const struct mtk_thermal_data mt7622_thermal_data = {
-+ .auxadc_channel = MT7622_TEMP_AUXADC_CHANNEL,
-+ .num_banks = MT7622_NUM_ZONES,
-+ .num_sensors = MT7622_NUM_SENSORS,
-+ .vts_index = mt7622_vts_index,
-+ .cali_val = MT7622_CALIBRATION,
-+ .num_controller = MT7622_NUM_CONTROLLER,
-+ .controller_offset = mt7622_tc_offset,
-+ .need_switch_bank = true,
-+ .bank_data = {
-+ {
-+ .num_sensors = 1,
-+ .sensors = mt7622_bank_data,
-+ },
-+ },
-+ .msr = mt7622_msr,
-+ .adcpnp = mt7622_adcpnp,
-+ .sensor_mux_values = mt7622_mux_values,
-+ .version = MTK_THERMAL_V2,
-+};
-+
-+/*
-+ * The MT8183 thermal controller has one bank for the current SW framework.
-+ * The MT8183 has a total of 6 temperature sensors.
-+ * There are two thermal controller to control the six sensor.
-+ * The first one bind 2 sensor, and the other bind 4 sensors.
-+ * The thermal core only gets the maximum temperature of all sensor, so
-+ * the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data, and this indeed needs the temperatures of the individual banks
-+ * for making better decisions.
-+ */
-+static const struct mtk_thermal_data mt8183_thermal_data = {
-+ .auxadc_channel = MT8183_TEMP_AUXADC_CHANNEL,
-+ .num_banks = MT8183_NUM_ZONES,
-+ .num_sensors = MT8183_NUM_SENSORS,
-+ .vts_index = mt8183_vts_index,
-+ .cali_val = MT8183_CALIBRATION,
-+ .num_controller = MT8183_NUM_CONTROLLER,
-+ .controller_offset = mt8183_tc_offset,
-+ .need_switch_bank = false,
-+ .bank_data = {
-+ {
-+ .num_sensors = 6,
-+ .sensors = mt8183_bank_data,
-+ },
-+ },
-+
-+ .msr = mt8183_msr,
-+ .adcpnp = mt8183_adcpnp,
-+ .sensor_mux_values = mt8183_mux_values,
-+ .version = MTK_THERMAL_V1,
-+};
-+
-+/*
-+ * MT7986 uses AUXADC Channel 11 for raw data access.
-+ */
-+static const struct mtk_thermal_data mt7986_thermal_data = {
-+ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL,
-+ .num_banks = MT7986_NUM_ZONES,
-+ .num_sensors = MT7986_NUM_SENSORS,
-+ .vts_index = mt7986_vts_index,
-+ .cali_val = MT7986_CALIBRATION,
-+ .num_controller = MT7986_NUM_CONTROLLER,
-+ .controller_offset = mt7986_tc_offset,
-+ .need_switch_bank = true,
-+ .bank_data = {
-+ {
-+ .num_sensors = 1,
-+ .sensors = mt7986_bank_data,
-+ },
-+ },
-+ .msr = mt7986_msr,
-+ .adcpnp = mt7986_adcpnp,
-+ .sensor_mux_values = mt7986_mux_values,
-+ .version = MTK_THERMAL_V3,
-+};
-+
-+/**
-+ * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
-+ * @mt: The thermal controller
-+ * @sensno: sensor number
-+ * @raw: raw ADC value
-+ *
-+ * This converts the raw ADC value to mcelsius using the SoC specific
-+ * calibration constants
-+ */
-+static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+ s32 tmp;
-+
-+ raw &= 0xfff;
-+
-+ tmp = 203450520 << 3;
-+ tmp /= mt->conf->cali_val + mt->o_slope;
-+ tmp /= 10000 + mt->adc_ge;
-+ tmp *= raw - mt->vts[sensno] - 3350;
-+ tmp >>= 3;
-+
-+ return mt->degc_cali * 500 - tmp;
-+}
-+
-+static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+ s32 format_1;
-+ s32 format_2;
-+ s32 g_oe;
-+ s32 g_gain;
-+ s32 g_x_roomt;
-+ s32 tmp;
-+
-+ if (raw == 0)
-+ return 0;
-+
-+ raw &= 0xfff;
-+ g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
-+ g_oe = mt->adc_oe - 512;
-+ format_1 = mt->vts[VTS2] + 3105 - g_oe;
-+ format_2 = (mt->degc_cali * 10) >> 1;
-+ g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
-+
-+ tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
-+ tmp = tmp * 10 * 100 / 11;
-+
-+ if (mt->o_slope_sign == 0)
-+ tmp = tmp / (165 - mt->o_slope);
-+ else
-+ tmp = tmp / (165 + mt->o_slope);
-+
-+ return (format_2 - tmp) * 100;
-+}
-+
-+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw)
-+{
-+ s32 tmp;
-+
-+ if (raw == 0)
-+ return 0;
-+
-+ raw &= 0xfff;
-+ tmp = 100000 * 15 / 16 * 10000;
-+ tmp /= 4096 - 512 + mt->adc_ge;
-+ tmp /= 1490;
-+ tmp *= raw - mt->vts[sensno] - 2900;
-+
-+ return mt->degc_cali * 500 - tmp;
-+}
-+
-+/**
-+ * mtk_thermal_get_bank - get bank
-+ * @bank: The bank
-+ *
-+ * The bank registers are banked, we have to select a bank in the
-+ * PTPCORESEL register to access it.
-+ */
-+static void mtk_thermal_get_bank(struct mtk_thermal_bank *bank)
-+{
-+ struct mtk_thermal *mt = bank->mt;
-+ u32 val;
-+
-+ if (mt->conf->need_switch_bank) {
-+ mutex_lock(&mt->lock);
-+
-+ val = readl(mt->thermal_base + PTPCORESEL);
-+ val &= ~0xf;
-+ val |= bank->id;
-+ writel(val, mt->thermal_base + PTPCORESEL);
-+ }
-+}
-+
-+/**
-+ * mtk_thermal_put_bank - release bank
-+ * @bank: The bank
-+ *
-+ * release a bank previously taken with mtk_thermal_get_bank,
-+ */
-+static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
-+{
-+ struct mtk_thermal *mt = bank->mt;
-+
-+ if (mt->conf->need_switch_bank)
-+ mutex_unlock(&mt->lock);
-+}
-+
-+/**
-+ * mtk_thermal_bank_temperature - get the temperature of a bank
-+ * @bank: The bank
-+ *
-+ * The temperature of a bank is considered the maximum temperature of
-+ * the sensors associated to the bank.
-+ */
-+static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
-+{
-+ struct mtk_thermal *mt = bank->mt;
-+ const struct mtk_thermal_data *conf = mt->conf;
-+ int i, temp = INT_MIN, max = INT_MIN;
-+ u32 raw;
-+
-+ for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
-+ raw = readl(mt->thermal_base + conf->msr[i]);
-+
-+ temp = mt->raw_to_mcelsius(
-+ mt, conf->bank_data[bank->id].sensors[i], raw);
-+
-+
-+ /*
-+ * The first read of a sensor often contains very high bogus
-+ * temperature value. Filter these out so that the system does
-+ * not immediately shut down.
-+ */
-+ if (temp > 200000)
-+ temp = 0;
-+
-+ if (temp > max)
-+ max = temp;
-+ }
-+
-+ return max;
-+}
-+
-+static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
-+{
-+ struct mtk_thermal *mt = tz->devdata;
-+ int i;
-+ int tempmax = INT_MIN;
-+
-+ for (i = 0; i < mt->conf->num_banks; i++) {
-+ struct mtk_thermal_bank *bank = &mt->banks[i];
-+
-+ mtk_thermal_get_bank(bank);
-+
-+ tempmax = max(tempmax, mtk_thermal_bank_temperature(bank));
-+
-+ mtk_thermal_put_bank(bank);
-+ }
-+
-+ *temperature = tempmax;
-+
-+ return 0;
-+}
-+
-+static const struct thermal_zone_device_ops mtk_thermal_ops = {
-+ .get_temp = mtk_read_temp,
-+};
-+
-+static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
-+ u32 apmixed_phys_base, u32 auxadc_phys_base,
-+ int ctrl_id)
-+{
-+ struct mtk_thermal_bank *bank = &mt->banks[num];
-+ const struct mtk_thermal_data *conf = mt->conf;
-+ int i;
-+
-+ int offset = mt->conf->controller_offset[ctrl_id];
-+ void __iomem *controller_base = mt->thermal_base + offset;
-+
-+ bank->id = num;
-+ bank->mt = mt;
-+
-+ mtk_thermal_get_bank(bank);
-+
-+ /* bus clock 66M counting unit is 12 * 15.15ns * 256 = 46.540us */
-+ writel(TEMP_MONCTL1_PERIOD_UNIT(12), controller_base + TEMP_MONCTL1);
-+
-+ /*
-+ * filt interval is 1 * 46.540us = 46.54us,
-+ * sen interval is 429 * 46.540us = 19.96ms
-+ */
-+ writel(TEMP_MONCTL2_FILTER_INTERVAL(1) |
-+ TEMP_MONCTL2_SENSOR_INTERVAL(429),
-+ controller_base + TEMP_MONCTL2);
-+
-+ /* poll is set to 10u */
-+ writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
-+ controller_base + TEMP_AHBPOLL);
-+
-+ /* temperature sampling control, 1 sample */
-+ writel(0x0, controller_base + TEMP_MSRCTL0);
-+
-+ /* exceed this polling time, IRQ would be inserted */
-+ writel(0xffffffff, controller_base + TEMP_AHBTO);
-+
-+ /* number of interrupts per event, 1 is enough */
-+ writel(0x0, controller_base + TEMP_MONIDET0);
-+ writel(0x0, controller_base + TEMP_MONIDET1);
-+
-+ /*
-+ * The MT8173 thermal controller does not have its own ADC. Instead it
-+ * uses AHB bus accesses to control the AUXADC. To do this the thermal
-+ * controller has to be programmed with the physical addresses of the
-+ * AUXADC registers and with the various bit positions in the AUXADC.
-+ * Also the thermal controller controls a mux in the APMIXEDSYS register
-+ * space.
-+ */
-+
-+ /*
-+ * this value will be stored to TEMP_PNPMUXADDR (TEMP_SPARE0)
-+ * automatically by hw
-+ */
-+ writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCMUX);
-+
-+ /* AHB address for auxadc mux selection */
-+ writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
-+ controller_base + TEMP_ADCMUXADDR);
-+
-+ if (mt->conf->version == MTK_THERMAL_V1) {
-+ /* AHB address for pnp sensor mux selection */
-+ writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
-+ controller_base + TEMP_PNPMUXADDR);
-+ }
-+
-+ /* AHB value for auxadc enable */
-+ writel(BIT(conf->auxadc_channel), controller_base + TEMP_ADCEN);
-+
-+ /* AHB address for auxadc enable (channel 0 immediate mode selected) */
-+ writel(auxadc_phys_base + AUXADC_CON1_SET_V,
-+ controller_base + TEMP_ADCENADDR);
-+
-+ /* AHB address for auxadc valid bit */
-+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
-+ controller_base + TEMP_ADCVALIDADDR);
-+
-+ /* AHB address for auxadc voltage output */
-+ writel(auxadc_phys_base + AUXADC_DATA(conf->auxadc_channel),
-+ controller_base + TEMP_ADCVOLTADDR);
-+
-+ /* read valid & voltage are at the same register */
-+ writel(0x0, controller_base + TEMP_RDCTRL);
-+
-+ /* indicate where the valid bit is */
-+ writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
-+ controller_base + TEMP_ADCVALIDMASK);
-+
-+ /* no shift */
-+ writel(0x0, controller_base + TEMP_ADCVOLTAGESHIFT);
-+
-+ /* enable auxadc mux write transaction */
-+ writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-+ controller_base + TEMP_ADCWRITECTRL);
-+
-+ for (i = 0; i < conf->bank_data[num].num_sensors; i++)
-+ writel(conf->sensor_mux_values[conf->bank_data[num].sensors[i]],
-+ mt->thermal_base + conf->adcpnp[i]);
-+
-+ writel((1 << conf->bank_data[num].num_sensors) - 1,
-+ controller_base + TEMP_MONCTL0);
-+
-+ writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
-+ TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-+ controller_base + TEMP_ADCWRITECTRL);
-+
-+ mtk_thermal_put_bank(bank);
-+}
-+
-+static u64 of_get_phys_base(struct device_node *np)
-+{
-+ u64 size64;
-+ const __be32 *regaddr_p;
-+
-+ regaddr_p = of_get_address(np, 0, &size64, NULL);
-+ if (!regaddr_p)
-+ return OF_BAD_ADDR;
-+
-+ return of_translate_address(np, regaddr_p);
-+}
-+
-+static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
-+{
-+ int i;
-+
-+ if (!(buf[0] & CALIB_BUF0_VALID_V1))
-+ return -EINVAL;
-+
-+ mt->adc_ge = CALIB_BUF1_ADC_GE_V1(buf[1]);
-+
-+ for (i = 0; i < mt->conf->num_sensors; i++) {
-+ switch (mt->conf->vts_index[i]) {
-+ case VTS1:
-+ mt->vts[VTS1] = CALIB_BUF0_VTS_TS1_V1(buf[0]);
-+ break;
-+ case VTS2:
-+ mt->vts[VTS2] = CALIB_BUF0_VTS_TS2_V1(buf[0]);
-+ break;
-+ case VTS3:
-+ mt->vts[VTS3] = CALIB_BUF1_VTS_TS3_V1(buf[1]);
-+ break;
-+ case VTS4:
-+ mt->vts[VTS4] = CALIB_BUF2_VTS_TS4_V1(buf[2]);
-+ break;
-+ case VTS5:
-+ mt->vts[VTS5] = CALIB_BUF2_VTS_TS5_V1(buf[2]);
-+ break;
-+ case VTSABB:
-+ mt->vts[VTSABB] =
-+ CALIB_BUF2_VTS_TSABB_V1(buf[2]);
-+ break;
-+ default:
-+ break;
-+ }
-+ }
-+
-+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V1(buf[0]);
-+ if (CALIB_BUF1_ID_V1(buf[1]) &
-+ CALIB_BUF0_O_SLOPE_SIGN_V1(buf[0]))
-+ mt->o_slope = -CALIB_BUF0_O_SLOPE_V1(buf[0]);
-+ else
-+ mt->o_slope = CALIB_BUF0_O_SLOPE_V1(buf[0]);
-+
-+ return 0;
-+}
-+
-+static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
-+{
-+ if (!CALIB_BUF1_VALID_V2(buf[1]))
-+ return -EINVAL;
-+
-+ mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
-+ mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
-+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
-+ mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
-+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
-+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
-+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
-+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
-+
-+ return 0;
-+}
-+
-+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf)
-+{
-+ if (!CALIB_BUF1_VALID_V3(buf[1]))
-+ return -EINVAL;
-+
-+ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]);
-+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]);
-+ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]);
-+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]);
-+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]);
-+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]);
-+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]);
-+
-+ if (CALIB_BUF1_ID_V3(buf[1]) == 0)
-+ mt->o_slope = 0;
-+
-+ return 0;
-+}
-+
-+static int mtk_thermal_get_calibration_data(struct device *dev,
-+ struct mtk_thermal *mt)
-+{
-+ struct nvmem_cell *cell;
-+ u32 *buf;
-+ size_t len;
-+ int i, ret = 0;
-+
-+ /* Start with default values */
-+ mt->adc_ge = 512;
-+ mt->adc_oe = 512;
-+ for (i = 0; i < mt->conf->num_sensors; i++)
-+ mt->vts[i] = 260;
-+ mt->degc_cali = 40;
-+ mt->o_slope = 0;
-+
-+ cell = nvmem_cell_get(dev, "calibration-data");
-+ if (IS_ERR(cell)) {
-+ if (PTR_ERR(cell) == -EPROBE_DEFER)
-+ return PTR_ERR(cell);
-+ return 0;
-+ }
-+
-+ buf = (u32 *)nvmem_cell_read(cell, &len);
-+
-+ nvmem_cell_put(cell);
-+
-+ if (IS_ERR(buf))
-+ return PTR_ERR(buf);
-+
-+ if (len < 3 * sizeof(u32)) {
-+ dev_warn(dev, "invalid calibration data\n");
-+ ret = -EINVAL;
-+ goto out;
-+ }
-+
-+ switch (mt->conf->version) {
-+ case MTK_THERMAL_V1:
-+ ret = mtk_thermal_extract_efuse_v1(mt, buf);
-+ break;
-+ case MTK_THERMAL_V2:
-+ ret = mtk_thermal_extract_efuse_v2(mt, buf);
-+ break;
-+ case MTK_THERMAL_V3:
-+ ret = mtk_thermal_extract_efuse_v3(mt, buf);
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ break;
-+ }
-+
-+ if (ret) {
-+ dev_info(dev, "Device not calibrated, using default calibration values\n");
-+ ret = 0;
-+ }
-+
-+out:
-+ kfree(buf);
-+
-+ return ret;
-+}
-+
-+static const struct of_device_id mtk_thermal_of_match[] = {
-+ {
-+ .compatible = "mediatek,mt8173-thermal",
-+ .data = (void *)&mt8173_thermal_data,
-+ },
-+ {
-+ .compatible = "mediatek,mt2701-thermal",
-+ .data = (void *)&mt2701_thermal_data,
-+ },
-+ {
-+ .compatible = "mediatek,mt2712-thermal",
-+ .data = (void *)&mt2712_thermal_data,
-+ },
-+ {
-+ .compatible = "mediatek,mt7622-thermal",
-+ .data = (void *)&mt7622_thermal_data,
-+ },
-+ {
-+ .compatible = "mediatek,mt7986-thermal",
-+ .data = (void *)&mt7986_thermal_data,
-+ },
-+ {
-+ .compatible = "mediatek,mt8183-thermal",
-+ .data = (void *)&mt8183_thermal_data,
-+ }, {
-+ },
-+};
-+MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
-+
-+static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
-+{
-+ int tmp;
-+
-+ tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-+ tmp &= ~(0x37);
-+ tmp |= 0x1;
-+ writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
-+ udelay(200);
-+}
-+
-+static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
-+ void __iomem *auxadc_base)
-+{
-+ int tmp;
-+
-+ writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
-+ writel(0x1, mt->thermal_base + TEMP_MONCTL0);
-+ tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
-+ writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
-+}
-+
-+static int mtk_thermal_probe(struct platform_device *pdev)
-+{
-+ int ret, i, ctrl_id;
-+ struct device_node *auxadc, *apmixedsys, *np = pdev->dev.of_node;
-+ struct mtk_thermal *mt;
-+ u64 auxadc_phys_base, apmixed_phys_base;
-+ struct thermal_zone_device *tzdev;
-+ void __iomem *apmixed_base, *auxadc_base;
-+
-+ mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
-+ if (!mt)
-+ return -ENOMEM;
-+
-+ mt->conf = of_device_get_match_data(&pdev->dev);
-+
-+ mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
-+ if (IS_ERR(mt->clk_peri_therm))
-+ return PTR_ERR(mt->clk_peri_therm);
-+
-+ mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
-+ if (IS_ERR(mt->clk_auxadc))
-+ return PTR_ERR(mt->clk_auxadc);
-+
-+ mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
-+ if (IS_ERR(mt->thermal_base))
-+ return PTR_ERR(mt->thermal_base);
-+
-+ ret = mtk_thermal_get_calibration_data(&pdev->dev, mt);
-+ if (ret)
-+ return ret;
-+
-+ mutex_init(&mt->lock);
-+
-+ mt->dev = &pdev->dev;
-+
-+ auxadc = of_parse_phandle(np, "mediatek,auxadc", 0);
-+ if (!auxadc) {
-+ dev_err(&pdev->dev, "missing auxadc node\n");
-+ return -ENODEV;
-+ }
-+
-+ auxadc_base = of_iomap(auxadc, 0);
-+ auxadc_phys_base = of_get_phys_base(auxadc);
-+
-+ of_node_put(auxadc);
-+
-+ if (auxadc_phys_base == OF_BAD_ADDR) {
-+ dev_err(&pdev->dev, "Can't get auxadc phys address\n");
-+ return -EINVAL;
-+ }
-+
-+ apmixedsys = of_parse_phandle(np, "mediatek,apmixedsys", 0);
-+ if (!apmixedsys) {
-+ dev_err(&pdev->dev, "missing apmixedsys node\n");
-+ return -ENODEV;
-+ }
-+
-+ apmixed_base = of_iomap(apmixedsys, 0);
-+ apmixed_phys_base = of_get_phys_base(apmixedsys);
-+
-+ of_node_put(apmixedsys);
-+
-+ if (apmixed_phys_base == OF_BAD_ADDR) {
-+ dev_err(&pdev->dev, "Can't get auxadc phys address\n");
-+ return -EINVAL;
-+ }
-+
-+ ret = device_reset_optional(&pdev->dev);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(mt->clk_auxadc);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
-+ return ret;
-+ }
-+
-+ ret = clk_prepare_enable(mt->clk_peri_therm);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
-+ goto err_disable_clk_auxadc;
-+ }
-+
-+ if (mt->conf->version != MTK_THERMAL_V1) {
-+ mtk_thermal_turn_on_buffer(apmixed_base);
-+ mtk_thermal_release_periodic_ts(mt, auxadc_base);
-+ }
-+
-+ if (mt->conf->version == MTK_THERMAL_V1)
-+ mt->raw_to_mcelsius = raw_to_mcelsius_v1;
-+ else if (mt->conf->version == MTK_THERMAL_V2)
-+ mt->raw_to_mcelsius = raw_to_mcelsius_v2;
-+ else
-+ mt->raw_to_mcelsius = raw_to_mcelsius_v3;
-+
-+ for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
-+ for (i = 0; i < mt->conf->num_banks; i++)
-+ mtk_thermal_init_bank(mt, i, apmixed_phys_base,
-+ auxadc_phys_base, ctrl_id);
-+
-+ platform_set_drvdata(pdev, mt);
-+
-+ tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
-+ &mtk_thermal_ops);
-+ if (IS_ERR(tzdev)) {
-+ ret = PTR_ERR(tzdev);
-+ goto err_disable_clk_peri_therm;
-+ }
-+
-+ ret = devm_thermal_add_hwmon_sysfs(tzdev);
-+ if (ret)
-+ dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
-+
-+ return 0;
-+
-+err_disable_clk_peri_therm:
-+ clk_disable_unprepare(mt->clk_peri_therm);
-+err_disable_clk_auxadc:
-+ clk_disable_unprepare(mt->clk_auxadc);
-+
-+ return ret;
-+}
-+
-+static int mtk_thermal_remove(struct platform_device *pdev)
-+{
-+ struct mtk_thermal *mt = platform_get_drvdata(pdev);
-+
-+ clk_disable_unprepare(mt->clk_peri_therm);
-+ clk_disable_unprepare(mt->clk_auxadc);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver mtk_thermal_driver = {
-+ .probe = mtk_thermal_probe,
-+ .remove = mtk_thermal_remove,
-+ .driver = {
-+ .name = "mtk-thermal",
-+ .of_match_table = mtk_thermal_of_match,
-+ },
-+};
-+
-+module_platform_driver(mtk_thermal_driver);
-+
-+MODULE_AUTHOR("Michael Kao <michael.kao@mediatek.com>");
-+MODULE_AUTHOR("Louis Yu <louis.yu@mediatek.com>");
-+MODULE_AUTHOR("Dawei Chien <dawei.chien@mediatek.com>");
-+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-+MODULE_AUTHOR("Hanyi Wu <hanyi.wu@mediatek.com>");
-+MODULE_DESCRIPTION("Mediatek thermal driver");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From 325fadf27b21f7d79843c3cc282b7f3e6620ad3d Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Thu, 9 Feb 2023 11:56:26 +0100
-Subject: [PATCH 06/42] thermal/drivers/mediatek: Add the Low Voltage Thermal
- Sensor driver
-
-The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi
-controllers contained in a thermal domain.
-
-A thermal domains can be the MCU or the AP.
-
-Each thermal domains contain up to seven controllers, each thermal
-controller handle up to four thermal sensors.
-
-The LVTS has two Finite State Machines (FSM), one to handle the
-functionin temperatures range like hot or cold temperature and another
-one to handle monitoring trip point. The FSM notifies via interrupts
-when a trip point is crossed.
-
-The interrupt is managed at the thermal controller level, so when an
-interrupt occurs, the driver has to find out which sensor triggered
-such an interrupt.
-
-The sampling of the thermal can be filtered or immediate. For the
-former, the LVTS measures several points and applies a low pass
-filter.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-
-On MT8195 Tomato Chromebook:
-
-Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230209105628.50294-5-bchihi@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/mediatek/Kconfig | 16 +
- drivers/thermal/mediatek/Makefile | 1 +
- drivers/thermal/mediatek/lvts_thermal.c | 1224 +++++++++++++++++++++++
- 3 files changed, 1241 insertions(+)
- create mode 100644 drivers/thermal/mediatek/lvts_thermal.c
-
---- a/drivers/thermal/mediatek/Kconfig
-+++ b/drivers/thermal/mediatek/Kconfig
-@@ -18,4 +18,20 @@ config MTK_SOC_THERMAL
- This driver configures thermal controllers to collect
- temperature via AUXADC interface.
-
-+config MTK_LVTS_THERMAL
-+ tristate "LVTS Thermal Driver for MediaTek SoCs"
-+ depends on HAS_IOMEM
-+ help
-+ Enable this option if you want to get SoC temperature
-+ information for supported MediaTek platforms.
-+ This driver configures LVTS (Low Voltage Thermal Sensor)
-+ thermal controllers to collect temperatures via ASIF
-+ (Analog Serial Interface).
-+
-+config MTK_LVTS_THERMAL_DEBUGFS
-+ bool "LVTS thermal debugfs"
-+ depends on MTK_LVTS_THERMAL && DEBUG_FS
-+ help
-+ Enable this option to debug the internals of the device driver.
-+
- endif
---- a/drivers/thermal/mediatek/Makefile
-+++ b/drivers/thermal/mediatek/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_MTK_SOC_THERMAL) += auxadc_thermal.o
-+obj-$(CONFIG_MTK_LVTS_THERMAL) += lvts_thermal.o
---- /dev/null
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -0,0 +1,1224 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Author: Balsam CHIHI <bchihi@baylibre.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/delay.h>
-+#include <linux/debugfs.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/iopoll.h>
-+#include <linux/kernel.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+#include <linux/thermal.h>
-+#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
-+
-+#define LVTS_MONCTL0(__base) (__base + 0x0000)
-+#define LVTS_MONCTL1(__base) (__base + 0x0004)
-+#define LVTS_MONCTL2(__base) (__base + 0x0008)
-+#define LVTS_MONINT(__base) (__base + 0x000C)
-+#define LVTS_MONINTSTS(__base) (__base + 0x0010)
-+#define LVTS_MONIDET0(__base) (__base + 0x0014)
-+#define LVTS_MONIDET1(__base) (__base + 0x0018)
-+#define LVTS_MONIDET2(__base) (__base + 0x001C)
-+#define LVTS_MONIDET3(__base) (__base + 0x0020)
-+#define LVTS_H2NTHRE(__base) (__base + 0x0024)
-+#define LVTS_HTHRE(__base) (__base + 0x0028)
-+#define LVTS_OFFSETH(__base) (__base + 0x0030)
-+#define LVTS_OFFSETL(__base) (__base + 0x0034)
-+#define LVTS_MSRCTL0(__base) (__base + 0x0038)
-+#define LVTS_MSRCTL1(__base) (__base + 0x003C)
-+#define LVTS_TSSEL(__base) (__base + 0x0040)
-+#define LVTS_CALSCALE(__base) (__base + 0x0048)
-+#define LVTS_ID(__base) (__base + 0x004C)
-+#define LVTS_CONFIG(__base) (__base + 0x0050)
-+#define LVTS_EDATA00(__base) (__base + 0x0054)
-+#define LVTS_EDATA01(__base) (__base + 0x0058)
-+#define LVTS_EDATA02(__base) (__base + 0x005C)
-+#define LVTS_EDATA03(__base) (__base + 0x0060)
-+#define LVTS_MSR0(__base) (__base + 0x0090)
-+#define LVTS_MSR1(__base) (__base + 0x0094)
-+#define LVTS_MSR2(__base) (__base + 0x0098)
-+#define LVTS_MSR3(__base) (__base + 0x009C)
-+#define LVTS_IMMD0(__base) (__base + 0x00A0)
-+#define LVTS_IMMD1(__base) (__base + 0x00A4)
-+#define LVTS_IMMD2(__base) (__base + 0x00A8)
-+#define LVTS_IMMD3(__base) (__base + 0x00AC)
-+#define LVTS_PROTCTL(__base) (__base + 0x00C0)
-+#define LVTS_PROTTA(__base) (__base + 0x00C4)
-+#define LVTS_PROTTB(__base) (__base + 0x00C8)
-+#define LVTS_PROTTC(__base) (__base + 0x00CC)
-+#define LVTS_CLKEN(__base) (__base + 0x00E4)
-+
-+#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38))
-+#define LVTS_GROUP_INTERVAL 1
-+#define LVTS_FILTER_INTERVAL 1
-+#define LVTS_SENSOR_INTERVAL 1
-+#define LVTS_HW_FILTER 0x2
-+#define LVTS_TSSEL_CONF 0x13121110
-+#define LVTS_CALSCALE_CONF 0x300
-+#define LVTS_MONINT_CONF 0x9FBF7BDE
-+
-+#define LVTS_INT_SENSOR0 0x0009001F
-+#define LVTS_INT_SENSOR1 0X000881F0
-+#define LVTS_INT_SENSOR2 0x00247C00
-+#define LVTS_INT_SENSOR3 0x1FC00000
-+
-+#define LVTS_SENSOR_MAX 4
-+#define LVTS_GOLDEN_TEMP_MAX 62
-+#define LVTS_GOLDEN_TEMP_DEFAULT 50
-+#define LVTS_COEFF_A -250460
-+#define LVTS_COEFF_B 250460
-+
-+#define LVTS_MSR_IMMEDIATE_MODE 0
-+#define LVTS_MSR_FILTERED_MODE 1
-+
-+#define LVTS_HW_SHUTDOWN_MT8195 105000
-+
-+static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
-+static int coeff_b = LVTS_COEFF_B;
-+
-+struct lvts_sensor_data {
-+ int dt_id;
-+};
-+
-+struct lvts_ctrl_data {
-+ struct lvts_sensor_data lvts_sensor[LVTS_SENSOR_MAX];
-+ int cal_offset[LVTS_SENSOR_MAX];
-+ int hw_tshut_temp;
-+ int num_lvts_sensor;
-+ int offset;
-+ int mode;
-+};
-+
-+struct lvts_data {
-+ const struct lvts_ctrl_data *lvts_ctrl;
-+ int num_lvts_ctrl;
-+};
-+
-+struct lvts_sensor {
-+ struct thermal_zone_device *tz;
-+ void __iomem *msr;
-+ void __iomem *base;
-+ int id;
-+ int dt_id;
-+};
-+
-+struct lvts_ctrl {
-+ struct lvts_sensor sensors[LVTS_SENSOR_MAX];
-+ u32 calibration[LVTS_SENSOR_MAX];
-+ u32 hw_tshut_raw_temp;
-+ int num_lvts_sensor;
-+ int mode;
-+ void __iomem *base;
-+};
-+
-+struct lvts_domain {
-+ struct lvts_ctrl *lvts_ctrl;
-+ struct reset_control *reset;
-+ struct clk *clk;
-+ int num_lvts_ctrl;
-+ void __iomem *base;
-+ size_t calib_len;
-+ u8 *calib;
-+#ifdef CONFIG_DEBUG_FS
-+ struct dentry *dom_dentry;
-+#endif
-+};
-+
-+#ifdef CONFIG_MTK_LVTS_THERMAL_DEBUGFS
-+
-+#define LVTS_DEBUG_FS_REGS(__reg) \
-+{ \
-+ .name = __stringify(__reg), \
-+ .offset = __reg(0), \
-+}
-+
-+static const struct debugfs_reg32 lvts_regs[] = {
-+ LVTS_DEBUG_FS_REGS(LVTS_MONCTL0),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONCTL1),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONCTL2),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONINT),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONINTSTS),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET0),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET1),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET2),
-+ LVTS_DEBUG_FS_REGS(LVTS_MONIDET3),
-+ LVTS_DEBUG_FS_REGS(LVTS_H2NTHRE),
-+ LVTS_DEBUG_FS_REGS(LVTS_HTHRE),
-+ LVTS_DEBUG_FS_REGS(LVTS_OFFSETH),
-+ LVTS_DEBUG_FS_REGS(LVTS_OFFSETL),
-+ LVTS_DEBUG_FS_REGS(LVTS_MSRCTL0),
-+ LVTS_DEBUG_FS_REGS(LVTS_MSRCTL1),
-+ LVTS_DEBUG_FS_REGS(LVTS_TSSEL),
-+ LVTS_DEBUG_FS_REGS(LVTS_CALSCALE),
-+ LVTS_DEBUG_FS_REGS(LVTS_ID),
-+ LVTS_DEBUG_FS_REGS(LVTS_CONFIG),
-+ LVTS_DEBUG_FS_REGS(LVTS_EDATA00),
-+ LVTS_DEBUG_FS_REGS(LVTS_EDATA01),
-+ LVTS_DEBUG_FS_REGS(LVTS_EDATA02),
-+ LVTS_DEBUG_FS_REGS(LVTS_EDATA03),
-+ LVTS_DEBUG_FS_REGS(LVTS_MSR0),
-+ LVTS_DEBUG_FS_REGS(LVTS_MSR1),
-+ LVTS_DEBUG_FS_REGS(LVTS_MSR2),
-+ LVTS_DEBUG_FS_REGS(LVTS_MSR3),
-+ LVTS_DEBUG_FS_REGS(LVTS_IMMD0),
-+ LVTS_DEBUG_FS_REGS(LVTS_IMMD1),
-+ LVTS_DEBUG_FS_REGS(LVTS_IMMD2),
-+ LVTS_DEBUG_FS_REGS(LVTS_IMMD3),
-+ LVTS_DEBUG_FS_REGS(LVTS_PROTCTL),
-+ LVTS_DEBUG_FS_REGS(LVTS_PROTTA),
-+ LVTS_DEBUG_FS_REGS(LVTS_PROTTB),
-+ LVTS_DEBUG_FS_REGS(LVTS_PROTTC),
-+ LVTS_DEBUG_FS_REGS(LVTS_CLKEN),
-+};
-+
-+static int lvts_debugfs_init(struct device *dev, struct lvts_domain *lvts_td)
-+{
-+ struct debugfs_regset32 *regset;
-+ struct lvts_ctrl *lvts_ctrl;
-+ struct dentry *dentry;
-+ char name[64];
-+ int i;
-+
-+ lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL);
-+ if (!lvts_td->dom_dentry)
-+ return 0;
-+
-+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
-+
-+ lvts_ctrl = &lvts_td->lvts_ctrl[i];
-+
-+ sprintf(name, "controller%d", i);
-+ dentry = debugfs_create_dir(name, lvts_td->dom_dentry);
-+ if (!dentry)
-+ continue;
-+
-+ regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL);
-+ if (!regset)
-+ continue;
-+
-+ regset->base = lvts_ctrl->base;
-+ regset->regs = lvts_regs;
-+ regset->nregs = ARRAY_SIZE(lvts_regs);
-+
-+ debugfs_create_regset32("registers", 0400, dentry, regset);
-+ }
-+
-+ return 0;
-+}
-+
-+static void lvts_debugfs_exit(struct lvts_domain *lvts_td)
-+{
-+ debugfs_remove_recursive(lvts_td->dom_dentry);
-+}
-+
-+#else
-+
-+static inline int lvts_debugfs_init(struct device *dev,
-+ struct lvts_domain *lvts_td)
-+{
-+ return 0;
-+}
-+
-+static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
-+
-+#endif
-+
-+static int lvts_raw_to_temp(u32 raw_temp)
-+{
-+ int temperature;
-+
-+ temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
-+ temperature += coeff_b;
-+
-+ return temperature;
-+}
-+
-+static u32 lvts_temp_to_raw(int temperature)
-+{
-+ u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
-+
-+ raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
-+
-+ return raw_temp;
-+}
-+
-+static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
-+{
-+ struct lvts_sensor *lvts_sensor = tz->devdata;
-+ void __iomem *msr = lvts_sensor->msr;
-+ u32 value;
-+
-+ /*
-+ * Measurement registers:
-+ *
-+ * LVTS_MSR[0-3] / LVTS_IMMD[0-3]
-+ *
-+ * Bits:
-+ *
-+ * 32-17: Unused
-+ * 16 : Valid temperature
-+ * 15-0 : Raw temperature
-+ */
-+ value = readl(msr);
-+
-+ /*
-+ * As the thermal zone temperature will read before the
-+ * hardware sensor is fully initialized, we have to check the
-+ * validity of the temperature returned when reading the
-+ * measurement register. The thermal controller will set the
-+ * valid bit temperature only when it is totally initialized.
-+ *
-+ * Otherwise, we may end up with garbage values out of the
-+ * functionning temperature and directly jump to a system
-+ * shutdown.
-+ */
-+ if (!(value & BIT(16)))
-+ return -EAGAIN;
-+
-+ *temp = lvts_raw_to_temp(value & 0xFFFF);
-+
-+ return 0;
-+}
-+
-+static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
-+{
-+ struct lvts_sensor *lvts_sensor = tz->devdata;
-+ void __iomem *base = lvts_sensor->base;
-+ u32 raw_low = lvts_temp_to_raw(low);
-+ u32 raw_high = lvts_temp_to_raw(high);
-+
-+ /*
-+ * Hot to normal temperature threshold
-+ *
-+ * LVTS_H2NTHRE
-+ *
-+ * Bits:
-+ *
-+ * 14-0 : Raw temperature for threshold
-+ */
-+ if (low != -INT_MAX) {
-+ dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low);
-+ writel(raw_low, LVTS_H2NTHRE(base));
-+ }
-+
-+ /*
-+ * Hot temperature threshold
-+ *
-+ * LVTS_HTHRE
-+ *
-+ * Bits:
-+ *
-+ * 14-0 : Raw temperature for threshold
-+ */
-+ dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high);
-+ writel(raw_high, LVTS_HTHRE(base));
-+
-+ return 0;
-+}
-+
-+static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl)
-+{
-+ irqreturn_t iret = IRQ_NONE;
-+ u32 value;
-+ u32 masks[] = {
-+ LVTS_INT_SENSOR0,
-+ LVTS_INT_SENSOR1,
-+ LVTS_INT_SENSOR2,
-+ LVTS_INT_SENSOR3
-+ };
-+ int i;
-+
-+ /*
-+ * Interrupt monitoring status
-+ *
-+ * LVTS_MONINTST
-+ *
-+ * Bits:
-+ *
-+ * 31 : Interrupt for stage 3
-+ * 30 : Interrupt for stage 2
-+ * 29 : Interrupt for state 1
-+ * 28 : Interrupt using filter on sensor 3
-+ *
-+ * 27 : Interrupt using immediate on sensor 3
-+ * 26 : Interrupt normal to hot on sensor 3
-+ * 25 : Interrupt high offset on sensor 3
-+ * 24 : Interrupt low offset on sensor 3
-+ *
-+ * 23 : Interrupt hot threshold on sensor 3
-+ * 22 : Interrupt cold threshold on sensor 3
-+ * 21 : Interrupt using filter on sensor 2
-+ * 20 : Interrupt using filter on sensor 1
-+ *
-+ * 19 : Interrupt using filter on sensor 0
-+ * 18 : Interrupt using immediate on sensor 2
-+ * 17 : Interrupt using immediate on sensor 1
-+ * 16 : Interrupt using immediate on sensor 0
-+ *
-+ * 15 : Interrupt device access timeout interrupt
-+ * 14 : Interrupt normal to hot on sensor 2
-+ * 13 : Interrupt high offset interrupt on sensor 2
-+ * 12 : Interrupt low offset interrupt on sensor 2
-+ *
-+ * 11 : Interrupt hot threshold on sensor 2
-+ * 10 : Interrupt cold threshold on sensor 2
-+ * 9 : Interrupt normal to hot on sensor 1
-+ * 8 : Interrupt high offset interrupt on sensor 1
-+ *
-+ * 7 : Interrupt low offset interrupt on sensor 1
-+ * 6 : Interrupt hot threshold on sensor 1
-+ * 5 : Interrupt cold threshold on sensor 1
-+ * 4 : Interrupt normal to hot on sensor 0
-+ *
-+ * 3 : Interrupt high offset interrupt on sensor 0
-+ * 2 : Interrupt low offset interrupt on sensor 0
-+ * 1 : Interrupt hot threshold on sensor 0
-+ * 0 : Interrupt cold threshold on sensor 0
-+ *
-+ * We are interested in the sensor(s) responsible of the
-+ * interrupt event. We update the thermal framework with the
-+ * thermal zone associated with the sensor. The framework will
-+ * take care of the rest whatever the kind of interrupt, we
-+ * are only interested in which sensor raised the interrupt.
-+ *
-+ * sensor 3 interrupt: 0001 1111 1100 0000 0000 0000 0000 0000
-+ * => 0x1FC00000
-+ * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000
-+ * => 0x00247C00
-+ * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000
-+ * => 0X000881F0
-+ * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111
-+ * => 0x0009001F
-+ */
-+ value = readl(LVTS_MONINTSTS(lvts_ctrl->base));
-+
-+ /*
-+ * Let's figure out which sensors raised the interrupt
-+ *
-+ * NOTE: the masks array must be ordered with the index
-+ * corresponding to the sensor id eg. index=0, mask for
-+ * sensor0.
-+ */
-+ for (i = 0; i < ARRAY_SIZE(masks); i++) {
-+
-+ if (!(value & masks[i]))
-+ continue;
-+
-+ thermal_zone_device_update(lvts_ctrl->sensors[i].tz,
-+ THERMAL_TRIP_VIOLATED);
-+ iret = IRQ_HANDLED;
-+ }
-+
-+ /*
-+ * Write back to clear the interrupt status (W1C)
-+ */
-+ writel(value, LVTS_MONINTSTS(lvts_ctrl->base));
-+
-+ return iret;
-+}
-+
-+/*
-+ * Temperature interrupt handler. Even if the driver supports more
-+ * interrupt modes, we use the interrupt when the temperature crosses
-+ * the hot threshold the way up and the way down (modulo the
-+ * hysteresis).
-+ *
-+ * Each thermal domain has a couple of interrupts, one for hardware
-+ * reset and another one for all the thermal events happening on the
-+ * different sensors.
-+ *
-+ * The interrupt is configured for thermal events when crossing the
-+ * hot temperature limit. At each interrupt, we check in every
-+ * controller if there is an interrupt pending.
-+ */
-+static irqreturn_t lvts_irq_handler(int irq, void *data)
-+{
-+ struct lvts_domain *lvts_td = data;
-+ irqreturn_t aux, iret = IRQ_NONE;
-+ int i;
-+
-+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
-+
-+ aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl);
-+ if (aux != IRQ_HANDLED)
-+ continue;
-+
-+ iret = IRQ_HANDLED;
-+ }
-+
-+ return iret;
-+}
-+
-+static struct thermal_zone_device_ops lvts_ops = {
-+ .get_temp = lvts_get_temp,
-+ .set_trips = lvts_set_trips,
-+};
-+
-+static int lvts_sensor_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
-+ const struct lvts_ctrl_data *lvts_ctrl_data)
-+{
-+ struct lvts_sensor *lvts_sensor = lvts_ctrl->sensors;
-+ void __iomem *msr_regs[] = {
-+ LVTS_MSR0(lvts_ctrl->base),
-+ LVTS_MSR1(lvts_ctrl->base),
-+ LVTS_MSR2(lvts_ctrl->base),
-+ LVTS_MSR3(lvts_ctrl->base)
-+ };
-+
-+ void __iomem *imm_regs[] = {
-+ LVTS_IMMD0(lvts_ctrl->base),
-+ LVTS_IMMD1(lvts_ctrl->base),
-+ LVTS_IMMD2(lvts_ctrl->base),
-+ LVTS_IMMD3(lvts_ctrl->base)
-+ };
-+
-+ int i;
-+
-+ for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++) {
-+
-+ int dt_id = lvts_ctrl_data->lvts_sensor[i].dt_id;
-+
-+ /*
-+ * At this point, we don't know which id matches which
-+ * sensor. Let's set arbitrally the id from the index.
-+ */
-+ lvts_sensor[i].id = i;
-+
-+ /*
-+ * The thermal zone registration will set the trip
-+ * point interrupt in the thermal controller
-+ * register. But this one will be reset in the
-+ * initialization after. So we need to post pone the
-+ * thermal zone creation after the controller is
-+ * setup. For this reason, we store the device tree
-+ * node id from the data in the sensor structure
-+ */
-+ lvts_sensor[i].dt_id = dt_id;
-+
-+ /*
-+ * We assign the base address of the thermal
-+ * controller as a back pointer. So it will be
-+ * accessible from the different thermal framework ops
-+ * as we pass the lvts_sensor pointer as thermal zone
-+ * private data.
-+ */
-+ lvts_sensor[i].base = lvts_ctrl->base;
-+
-+ /*
-+ * Each sensor has its own register address to read from.
-+ */
-+ lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ?
-+ imm_regs[i] : msr_regs[i];
-+ };
-+
-+ lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor;
-+
-+ return 0;
-+}
-+
-+/*
-+ * The efuse blob values follows the sensor enumeration per thermal
-+ * controller. The decoding of the stream is as follow:
-+ *
-+ * <--?-> <----big0 ???---> <-sensor0-> <-0->
-+ * ------------------------------------------
-+ * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 |
-+ * ------------------------------------------
-+ *
-+ * <--sensor1--><-0-> <----big1 ???---> <-sen
-+ * ------------------------------------------
-+ * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-+ * ------------------------------------------
-+ *
-+ * sor0-> <-0-> <-sensor1-> <-0-> ..........
-+ * ------------------------------------------
-+ * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-+ * ------------------------------------------
-+ *
-+ * And so on ...
-+ *
-+ * The data description gives the offset of the calibration data in
-+ * this bytes stream for each sensor.
-+ *
-+ * Each thermal controller can handle up to 4 sensors max, we don't
-+ * care if there are less as the array of calibration is sized to 4
-+ * anyway. The unused sensor slot will be zeroed.
-+ */
-+static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
-+ const struct lvts_ctrl_data *lvts_ctrl_data,
-+ u8 *efuse_calibration)
-+{
-+ int i;
-+
-+ for (i = 0; i < lvts_ctrl_data->num_lvts_sensor; i++)
-+ memcpy(&lvts_ctrl->calibration[i],
-+ efuse_calibration + lvts_ctrl_data->cal_offset[i], 2);
-+
-+ return 0;
-+}
-+
-+/*
-+ * The efuse bytes stream can be split into different chunk of
-+ * nvmems. This function reads and concatenate those into a single
-+ * buffer so it can be read sequentially when initializing the
-+ * calibration data.
-+ */
-+static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td,
-+ const struct lvts_data *lvts_data)
-+{
-+ struct device_node *np = dev_of_node(dev);
-+ struct nvmem_cell *cell;
-+ struct property *prop;
-+ const char *cell_name;
-+
-+ of_property_for_each_string(np, "nvmem-cell-names", prop, cell_name) {
-+ size_t len;
-+ u8 *efuse;
-+
-+ cell = of_nvmem_cell_get(np, cell_name);
-+ if (IS_ERR(cell)) {
-+ dev_err(dev, "Failed to get cell '%s'\n", cell_name);
-+ return PTR_ERR(cell);
-+ }
-+
-+ efuse = nvmem_cell_read(cell, &len);
-+
-+ nvmem_cell_put(cell);
-+
-+ if (IS_ERR(efuse)) {
-+ dev_err(dev, "Failed to read cell '%s'\n", cell_name);
-+ return PTR_ERR(efuse);
-+ }
-+
-+ lvts_td->calib = devm_krealloc(dev, lvts_td->calib,
-+ lvts_td->calib_len + len, GFP_KERNEL);
-+ if (!lvts_td->calib)
-+ return -ENOMEM;
-+
-+ memcpy(lvts_td->calib + lvts_td->calib_len, efuse, len);
-+
-+ lvts_td->calib_len += len;
-+
-+ kfree(efuse);
-+ }
-+
-+ return 0;
-+}
-+
-+static int lvts_golden_temp_init(struct device *dev, u32 *value)
-+{
-+ u32 gt;
-+
-+ gt = (*value) >> 24;
-+
-+ if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
-+ golden_temp = gt;
-+
-+ coeff_b = golden_temp * 500 + LVTS_COEFF_B;
-+
-+ return 0;
-+}
-+
-+static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
-+ const struct lvts_data *lvts_data)
-+{
-+ size_t size = sizeof(*lvts_td->lvts_ctrl) * lvts_data->num_lvts_ctrl;
-+ struct lvts_ctrl *lvts_ctrl;
-+ int i, ret;
-+
-+ /*
-+ * Create the calibration bytes stream from efuse data
-+ */
-+ ret = lvts_calibration_read(dev, lvts_td, lvts_data);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * The golden temp information is contained in the first chunk
-+ * of efuse data.
-+ */
-+ ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
-+ if (ret)
-+ return ret;
-+
-+ lvts_ctrl = devm_kzalloc(dev, size, GFP_KERNEL);
-+ if (!lvts_ctrl)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
-+
-+ lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
-+
-+ ret = lvts_sensor_init(dev, &lvts_ctrl[i],
-+ &lvts_data->lvts_ctrl[i]);
-+ if (ret)
-+ return ret;
-+
-+ ret = lvts_calibration_init(dev, &lvts_ctrl[i],
-+ &lvts_data->lvts_ctrl[i],
-+ lvts_td->calib);
-+ if (ret)
-+ return ret;
-+
-+ /*
-+ * The mode the ctrl will use to read the temperature
-+ * (filtered or immediate)
-+ */
-+ lvts_ctrl[i].mode = lvts_data->lvts_ctrl[i].mode;
-+
-+ /*
-+ * The temperature to raw temperature must be done
-+ * after initializing the calibration.
-+ */
-+ lvts_ctrl[i].hw_tshut_raw_temp =
-+ lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
-+ }
-+
-+ /*
-+ * We no longer need the efuse bytes stream, let's free it
-+ */
-+ devm_kfree(dev, lvts_td->calib);
-+
-+ lvts_td->lvts_ctrl = lvts_ctrl;
-+ lvts_td->num_lvts_ctrl = lvts_data->num_lvts_ctrl;
-+
-+ return 0;
-+}
-+
-+/*
-+ * At this point the configuration register is the only place in the
-+ * driver where we write multiple values. Per hardware constraint,
-+ * each write in the configuration register must be separated by a
-+ * delay of 2 us.
-+ */
-+static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, u32 *cmds, int nr_cmds)
-+{
-+ int i;
-+
-+ /*
-+ * Configuration register
-+ */
-+ for (i = 0; i < nr_cmds; i++) {
-+ writel(cmds[i], LVTS_CONFIG(lvts_ctrl->base));
-+ usleep_range(2, 4);
-+ }
-+}
-+
-+static int lvts_irq_init(struct lvts_ctrl *lvts_ctrl)
-+{
-+ /*
-+ * LVTS_PROTCTL : Thermal Protection Sensor Selection
-+ *
-+ * Bits:
-+ *
-+ * 19-18 : Sensor to base the protection on
-+ * 17-16 : Strategy:
-+ * 00 : Average of 4 sensors
-+ * 01 : Max of 4 sensors
-+ * 10 : Selected sensor with bits 19-18
-+ * 11 : Reserved
-+ */
-+ writel(BIT(16), LVTS_PROTCTL(lvts_ctrl->base));
-+
-+ /*
-+ * LVTS_PROTTA : Stage 1 temperature threshold
-+ * LVTS_PROTTB : Stage 2 temperature threshold
-+ * LVTS_PROTTC : Stage 3 temperature threshold
-+ *
-+ * Bits:
-+ *
-+ * 14-0: Raw temperature threshold
-+ *
-+ * writel(0x0, LVTS_PROTTA(lvts_ctrl->base));
-+ * writel(0x0, LVTS_PROTTB(lvts_ctrl->base));
-+ */
-+ writel(lvts_ctrl->hw_tshut_raw_temp, LVTS_PROTTC(lvts_ctrl->base));
-+
-+ /*
-+ * LVTS_MONINT : Interrupt configuration register
-+ *
-+ * The LVTS_MONINT register layout is the same as the LVTS_MONINTSTS
-+ * register, except we set the bits to enable the interrupt.
-+ */
-+ writel(LVTS_MONINT_CONF, LVTS_MONINT(lvts_ctrl->base));
-+
-+ return 0;
-+}
-+
-+static int lvts_domain_reset(struct device *dev, struct reset_control *reset)
-+{
-+ int ret;
-+
-+ ret = reset_control_assert(reset);
-+ if (ret)
-+ return ret;
-+
-+ return reset_control_deassert(reset);
-+}
-+
-+/*
-+ * Enable or disable the clocks of a specified thermal controller
-+ */
-+static int lvts_ctrl_set_enable(struct lvts_ctrl *lvts_ctrl, int enable)
-+{
-+ /*
-+ * LVTS_CLKEN : Internal LVTS clock
-+ *
-+ * Bits:
-+ *
-+ * 0 : enable / disable clock
-+ */
-+ writel(enable, LVTS_CLKEN(lvts_ctrl->base));
-+
-+ return 0;
-+}
-+
-+static int lvts_ctrl_connect(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+ u32 id, cmds[] = { 0xC103FFFF, 0xC502FF55 };
-+
-+ lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds));
-+
-+ /*
-+ * LVTS_ID : Get ID and status of the thermal controller
-+ *
-+ * Bits:
-+ *
-+ * 0-5 : thermal controller id
-+ * 7 : thermal controller connection is valid
-+ */
-+ id = readl(LVTS_ID(lvts_ctrl->base));
-+ if (!(id & BIT(7)))
-+ return -EIO;
-+
-+ return 0;
-+}
-+
-+static int lvts_ctrl_initialize(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+ /*
-+ * Write device mask: 0xC1030000
-+ */
-+ u32 cmds[] = {
-+ 0xC1030E01, 0xC1030CFC, 0xC1030A8C, 0xC103098D, 0xC10308F1,
-+ 0xC10307A6, 0xC10306B8, 0xC1030500, 0xC1030420, 0xC1030300,
-+ 0xC1030030, 0xC10300F6, 0xC1030050, 0xC1030060, 0xC10300AC,
-+ 0xC10300FC, 0xC103009D, 0xC10300F1, 0xC10300E1
-+ };
-+
-+ lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds));
-+
-+ return 0;
-+}
-+
-+static int lvts_ctrl_calibrate(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+ int i;
-+ void __iomem *lvts_edata[] = {
-+ LVTS_EDATA00(lvts_ctrl->base),
-+ LVTS_EDATA01(lvts_ctrl->base),
-+ LVTS_EDATA02(lvts_ctrl->base),
-+ LVTS_EDATA03(lvts_ctrl->base)
-+ };
-+
-+ /*
-+ * LVTS_EDATA0X : Efuse calibration reference value for sensor X
-+ *
-+ * Bits:
-+ *
-+ * 20-0 : Efuse value for normalization data
-+ */
-+ for (i = 0; i < LVTS_SENSOR_MAX; i++)
-+ writel(lvts_ctrl->calibration[i], lvts_edata[i]);
-+
-+ return 0;
-+}
-+
-+static int lvts_ctrl_configure(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+ u32 value;
-+
-+ /*
-+ * LVTS_TSSEL : Sensing point index numbering
-+ *
-+ * Bits:
-+ *
-+ * 31-24: ADC Sense 3
-+ * 23-16: ADC Sense 2
-+ * 15-8 : ADC Sense 1
-+ * 7-0 : ADC Sense 0
-+ */
-+ value = LVTS_TSSEL_CONF;
-+ writel(value, LVTS_TSSEL(lvts_ctrl->base));
-+
-+ /*
-+ * LVTS_CALSCALE : ADC voltage round
-+ */
-+ value = 0x300;
-+ value = LVTS_CALSCALE_CONF;
-+
-+ /*
-+ * LVTS_MSRCTL0 : Sensor filtering strategy
-+ *
-+ * Filters:
-+ *
-+ * 000 : One sample
-+ * 001 : Avg 2 samples
-+ * 010 : 4 samples, drop min and max, avg 2 samples
-+ * 011 : 6 samples, drop min and max, avg 4 samples
-+ * 100 : 10 samples, drop min and max, avg 8 samples
-+ * 101 : 18 samples, drop min and max, avg 16 samples
-+ *
-+ * Bits:
-+ *
-+ * 0-2 : Sensor0 filter
-+ * 3-5 : Sensor1 filter
-+ * 6-8 : Sensor2 filter
-+ * 9-11 : Sensor3 filter
-+ */
-+ value = LVTS_HW_FILTER << 9 | LVTS_HW_FILTER << 6 |
-+ LVTS_HW_FILTER << 3 | LVTS_HW_FILTER;
-+ writel(value, LVTS_MSRCTL0(lvts_ctrl->base));
-+
-+ /*
-+ * LVTS_MSRCTL1 : Measurement control
-+ *
-+ * Bits:
-+ *
-+ * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
-+ * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
-+ * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
-+ * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
-+ *
-+ * That configuration will ignore the filtering and the delays
-+ * introduced below in MONCTL1 and MONCTL2
-+ */
-+ if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
-+ value = BIT(9) | BIT(6) | BIT(5) | BIT(4);
-+ writel(value, LVTS_MSRCTL1(lvts_ctrl->base));
-+ }
-+
-+ /*
-+ * LVTS_MONCTL1 : Period unit and group interval configuration
-+ *
-+ * The clock source of LVTS thermal controller is 26MHz.
-+ *
-+ * The period unit is a time base for all the interval delays
-+ * specified in the registers. By default we use 12. The time
-+ * conversion is done by multiplying by 256 and 1/26.10^6
-+ *
-+ * An interval delay multiplied by the period unit gives the
-+ * duration in seconds.
-+ *
-+ * - Filter interval delay is a delay between two samples of
-+ * the same sensor.
-+ *
-+ * - Sensor interval delay is a delay between two samples of
-+ * different sensors.
-+ *
-+ * - Group interval delay is a delay between different rounds.
-+ *
-+ * For example:
-+ * If Period unit = C, filter delay = 1, sensor delay = 2, group delay = 1,
-+ * and two sensors, TS1 and TS2, are in a LVTS thermal controller
-+ * and then
-+ * Period unit time = C * 1/26M * 256 = 12 * 38.46ns * 256 = 118.149us
-+ * Filter interval delay = 1 * Period unit = 118.149us
-+ * Sensor interval delay = 2 * Period unit = 236.298us
-+ * Group interval delay = 1 * Period unit = 118.149us
-+ *
-+ * TS1 TS1 ... TS1 TS2 TS2 ... TS2 TS1...
-+ * <--> Filter interval delay
-+ * <--> Sensor interval delay
-+ * <--> Group interval delay
-+ * Bits:
-+ * 29 - 20 : Group interval
-+ * 16 - 13 : Send a single interrupt when crossing the hot threshold (1)
-+ * or an interrupt everytime the hot threshold is crossed (0)
-+ * 9 - 0 : Period unit
-+ *
-+ */
-+ value = LVTS_GROUP_INTERVAL << 20 | LVTS_PERIOD_UNIT;
-+ writel(value, LVTS_MONCTL1(lvts_ctrl->base));
-+
-+ /*
-+ * LVTS_MONCTL2 : Filtering and sensor interval
-+ *
-+ * Bits:
-+ *
-+ * 25-16 : Interval unit in PERIOD_UNIT between sample on
-+ * the same sensor, filter interval
-+ * 9-0 : Interval unit in PERIOD_UNIT between each sensor
-+ *
-+ */
-+ value = LVTS_FILTER_INTERVAL << 16 | LVTS_SENSOR_INTERVAL;
-+ writel(value, LVTS_MONCTL2(lvts_ctrl->base));
-+
-+ return lvts_irq_init(lvts_ctrl);
-+}
-+
-+static int lvts_ctrl_start(struct device *dev, struct lvts_ctrl *lvts_ctrl)
-+{
-+ struct lvts_sensor *lvts_sensors = lvts_ctrl->sensors;
-+ struct thermal_zone_device *tz;
-+ u32 sensor_map = 0;
-+ int i;
-+
-+ for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) {
-+
-+ int dt_id = lvts_sensors[i].dt_id;
-+
-+ tz = devm_thermal_of_zone_register(dev, dt_id, &lvts_sensors[i],
-+ &lvts_ops);
-+ if (IS_ERR(tz)) {
-+ /*
-+ * This thermal zone is not described in the
-+ * device tree. It is not an error from the
-+ * thermal OF code POV, we just continue.
-+ */
-+ if (PTR_ERR(tz) == -ENODEV)
-+ continue;
-+
-+ return PTR_ERR(tz);
-+ }
-+
-+ /*
-+ * The thermal zone pointer will be needed in the
-+ * interrupt handler, we store it in the sensor
-+ * structure. The thermal domain structure will be
-+ * passed to the interrupt handler private data as the
-+ * interrupt is shared for all the controller
-+ * belonging to the thermal domain.
-+ */
-+ lvts_sensors[i].tz = tz;
-+
-+ /*
-+ * This sensor was correctly associated with a thermal
-+ * zone, let's set the corresponding bit in the sensor
-+ * map, so we can enable the temperature monitoring in
-+ * the hardware thermal controller.
-+ */
-+ sensor_map |= BIT(i);
-+ }
-+
-+ /*
-+ * Bits:
-+ * 9: Single point access flow
-+ * 0-3: Enable sensing point 0-3
-+ *
-+ * The initialization of the thermal zones give us
-+ * which sensor point to enable. If any thermal zone
-+ * was not described in the device tree, it won't be
-+ * enabled here in the sensor map.
-+ */
-+ writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
-+
-+ return 0;
-+}
-+
-+static int lvts_domain_init(struct device *dev, struct lvts_domain *lvts_td,
-+ const struct lvts_data *lvts_data)
-+{
-+ struct lvts_ctrl *lvts_ctrl;
-+ int i, ret;
-+
-+ ret = lvts_ctrl_init(dev, lvts_td, lvts_data);
-+ if (ret)
-+ return ret;
-+
-+ ret = lvts_domain_reset(dev, lvts_td->reset);
-+ if (ret) {
-+ dev_dbg(dev, "Failed to reset domain");
-+ return ret;
-+ }
-+
-+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
-+
-+ lvts_ctrl = &lvts_td->lvts_ctrl[i];
-+
-+ /*
-+ * Initialization steps:
-+ *
-+ * - Enable the clock
-+ * - Connect to the LVTS
-+ * - Initialize the LVTS
-+ * - Prepare the calibration data
-+ * - Select monitored sensors
-+ * [ Configure sampling ]
-+ * [ Configure the interrupt ]
-+ * - Start measurement
-+ */
-+ ret = lvts_ctrl_set_enable(lvts_ctrl, true);
-+ if (ret) {
-+ dev_dbg(dev, "Failed to enable LVTS clock");
-+ return ret;
-+ }
-+
-+ ret = lvts_ctrl_connect(dev, lvts_ctrl);
-+ if (ret) {
-+ dev_dbg(dev, "Failed to connect to LVTS controller");
-+ return ret;
-+ }
-+
-+ ret = lvts_ctrl_initialize(dev, lvts_ctrl);
-+ if (ret) {
-+ dev_dbg(dev, "Failed to initialize controller");
-+ return ret;
-+ }
-+
-+ ret = lvts_ctrl_calibrate(dev, lvts_ctrl);
-+ if (ret) {
-+ dev_dbg(dev, "Failed to calibrate controller");
-+ return ret;
-+ }
-+
-+ ret = lvts_ctrl_configure(dev, lvts_ctrl);
-+ if (ret) {
-+ dev_dbg(dev, "Failed to configure controller");
-+ return ret;
-+ }
-+
-+ ret = lvts_ctrl_start(dev, lvts_ctrl);
-+ if (ret) {
-+ dev_dbg(dev, "Failed to start controller");
-+ return ret;
-+ }
-+ }
-+
-+ return lvts_debugfs_init(dev, lvts_td);
-+}
-+
-+static int lvts_probe(struct platform_device *pdev)
-+{
-+ const struct lvts_data *lvts_data;
-+ struct lvts_domain *lvts_td;
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ int irq, ret;
-+
-+ lvts_td = devm_kzalloc(dev, sizeof(*lvts_td), GFP_KERNEL);
-+ if (!lvts_td)
-+ return -ENOMEM;
-+
-+ lvts_data = of_device_get_match_data(dev);
-+
-+ lvts_td->clk = devm_clk_get_enabled(dev, NULL);
-+ if (IS_ERR(lvts_td->clk))
-+ return dev_err_probe(dev, PTR_ERR(lvts_td->clk), "Failed to retrieve clock\n");
-+
-+ res = platform_get_mem_or_io(pdev, 0);
-+ if (!res)
-+ return dev_err_probe(dev, (-ENXIO), "No IO resource\n");
-+
-+ lvts_td->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
-+ if (IS_ERR(lvts_td->base))
-+ return dev_err_probe(dev, PTR_ERR(lvts_td->base), "Failed to map io resource\n");
-+
-+ lvts_td->reset = devm_reset_control_get_by_index(dev, 0);
-+ if (IS_ERR(lvts_td->reset))
-+ return dev_err_probe(dev, PTR_ERR(lvts_td->reset), "Failed to get reset control\n");
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0)
-+ return dev_err_probe(dev, irq, "No irq resource\n");
-+
-+ ret = lvts_domain_init(dev, lvts_td, lvts_data);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
-+
-+ /*
-+ * At this point the LVTS is initialized and enabled. We can
-+ * safely enable the interrupt.
-+ */
-+ ret = devm_request_threaded_irq(dev, irq, NULL, lvts_irq_handler,
-+ IRQF_ONESHOT, dev_name(dev), lvts_td);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to request interrupt\n");
-+
-+ platform_set_drvdata(pdev, lvts_td);
-+
-+ return 0;
-+}
-+
-+static int lvts_remove(struct platform_device *pdev)
-+{
-+ struct lvts_domain *lvts_td;
-+ int i;
-+
-+ lvts_td = platform_get_drvdata(pdev);
-+
-+ for (i = 0; i < lvts_td->num_lvts_ctrl; i++)
-+ lvts_ctrl_set_enable(&lvts_td->lvts_ctrl[i], false);
-+
-+ lvts_debugfs_exit(lvts_td);
-+
-+ return 0;
-+}
-+
-+static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = {
-+ {
-+ .cal_offset = { 0x04, 0x07 },
-+ .lvts_sensor = {
-+ { .dt_id = MT8195_MCU_BIG_CPU0 },
-+ { .dt_id = MT8195_MCU_BIG_CPU1 }
-+ },
-+ .num_lvts_sensor = 2,
-+ .offset = 0x0,
-+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+ },
-+ {
-+ .cal_offset = { 0x0d, 0x10 },
-+ .lvts_sensor = {
-+ { .dt_id = MT8195_MCU_BIG_CPU2 },
-+ { .dt_id = MT8195_MCU_BIG_CPU3 }
-+ },
-+ .num_lvts_sensor = 2,
-+ .offset = 0x100,
-+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+ },
-+ {
-+ .cal_offset = { 0x16, 0x19, 0x1c, 0x1f },
-+ .lvts_sensor = {
-+ { .dt_id = MT8195_MCU_LITTLE_CPU0 },
-+ { .dt_id = MT8195_MCU_LITTLE_CPU1 },
-+ { .dt_id = MT8195_MCU_LITTLE_CPU2 },
-+ { .dt_id = MT8195_MCU_LITTLE_CPU3 }
-+ },
-+ .num_lvts_sensor = 4,
-+ .offset = 0x200,
-+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+ }
-+};
-+
-+static const struct lvts_data mt8195_lvts_mcu_data = {
-+ .lvts_ctrl = mt8195_lvts_data_ctrl,
-+ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_data_ctrl),
-+};
-+
-+static const struct of_device_id lvts_of_match[] = {
-+ { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, lvts_of_match);
-+
-+static struct platform_driver lvts_driver = {
-+ .probe = lvts_probe,
-+ .remove = lvts_remove,
-+ .driver = {
-+ .name = "mtk-lvts-thermal",
-+ .of_match_table = lvts_of_match,
-+ },
-+};
-+module_platform_driver(lvts_driver);
-+
-+MODULE_AUTHOR("Balsam CHIHI <bchihi@baylibre.com>");
-+MODULE_DESCRIPTION("MediaTek LVTS Thermal Driver");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From 498e2f7a6e69dcbca24715de2b4b97569fdfeff4 Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Thu, 9 Feb 2023 11:56:24 +0100
-Subject: [PATCH] dt-bindings: thermal: mediatek: Add LVTS thermal controllers
-
-Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- .../thermal/mediatek,lvts-thermal.yaml | 142 ++++++++++++++++++
- .../thermal/mediatek,lvts-thermal.h | 19 +++
- 2 files changed, 161 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
- create mode 100644 include/dt-bindings/thermal/mediatek,lvts-thermal.h
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
-@@ -0,0 +1,142 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/thermal/mediatek,lvts-thermal.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek SoC Low Voltage Thermal Sensor (LVTS)
-+
-+maintainers:
-+ - Balsam CHIHI <bchihi@baylibre.com>
-+
-+description: |
-+ LVTS is a thermal management architecture composed of three subsystems,
-+ a Sensing device - Thermal Sensing Micro Circuit Unit (TSMCU),
-+ a Converter - Low Voltage Thermal Sensor converter (LVTS), and
-+ a Digital controller (LVTS_CTRL).
-+
-+properties:
-+ compatible:
-+ enum:
-+ - mediatek,mt8192-lvts-ap
-+ - mediatek,mt8192-lvts-mcu
-+ - mediatek,mt8195-lvts-ap
-+ - mediatek,mt8195-lvts-mcu
-+
-+ reg:
-+ maxItems: 1
-+
-+ interrupts:
-+ maxItems: 1
-+
-+ clocks:
-+ maxItems: 1
-+
-+ resets:
-+ maxItems: 1
-+ description: LVTS reset for clearing temporary data on AP/MCU.
-+
-+ nvmem-cells:
-+ minItems: 1
-+ items:
-+ - description: Calibration eFuse data 1 for LVTS
-+ - description: Calibration eFuse data 2 for LVTS
-+
-+ nvmem-cell-names:
-+ minItems: 1
-+ items:
-+ - const: lvts-calib-data-1
-+ - const: lvts-calib-data-2
-+
-+ "#thermal-sensor-cells":
-+ const: 1
-+
-+allOf:
-+ - $ref: thermal-sensor.yaml#
-+
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
-+ - mediatek,mt8192-lvts-ap
-+ - mediatek,mt8192-lvts-mcu
-+ then:
-+ properties:
-+ nvmem-cells:
-+ maxItems: 1
-+
-+ nvmem-cell-names:
-+ maxItems: 1
-+
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
-+ - mediatek,mt8195-lvts-ap
-+ - mediatek,mt8195-lvts-mcu
-+ then:
-+ properties:
-+ nvmem-cells:
-+ minItems: 2
-+
-+ nvmem-cell-names:
-+ minItems: 2
-+
-+required:
-+ - compatible
-+ - reg
-+ - interrupts
-+ - clocks
-+ - resets
-+ - nvmem-cells
-+ - nvmem-cell-names
-+ - "#thermal-sensor-cells"
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ #include <dt-bindings/interrupt-controller/arm-gic.h>
-+ #include <dt-bindings/clock/mt8195-clk.h>
-+ #include <dt-bindings/reset/mt8195-resets.h>
-+ #include <dt-bindings/thermal/mediatek,lvts-thermal.h>
-+
-+ soc {
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
-+ lvts_mcu: thermal-sensor@11278000 {
-+ compatible = "mediatek,mt8195-lvts-mcu";
-+ reg = <0 0x11278000 0 0x1000>;
-+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
-+ clocks = <&infracfg_ao CLK_INFRA_AO_THERM>;
-+ resets = <&infracfg_ao MT8195_INFRA_RST4_THERM_CTRL_MCU_SWRST>;
-+ nvmem-cells = <&lvts_efuse_data1 &lvts_efuse_data2>;
-+ nvmem-cell-names = "lvts-calib-data-1", "lvts-calib-data-2";
-+ #thermal-sensor-cells = <1>;
-+ };
-+ };
-+
-+ thermal_zones: thermal-zones {
-+ cpu0-thermal {
-+ polling-delay = <1000>;
-+ polling-delay-passive = <250>;
-+ thermal-sensors = <&lvts_mcu MT8195_MCU_LITTLE_CPU0>;
-+
-+ trips {
-+ cpu0_alert: trip-alert {
-+ temperature = <85000>;
-+ hysteresis = <2000>;
-+ type = "passive";
-+ };
-+
-+ cpu0_crit: trip-crit {
-+ temperature = <100000>;
-+ hysteresis = <2000>;
-+ type = "critical";
-+ };
-+ };
-+ };
-+ };
---- /dev/null
-+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
-@@ -0,0 +1,19 @@
-+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
-+/*
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Author: Balsam CHIHI <bchihi@baylibre.com>
-+ */
-+
-+#ifndef __MEDIATEK_LVTS_DT_H
-+#define __MEDIATEK_LVTS_DT_H
-+
-+#define MT8195_MCU_BIG_CPU0 0
-+#define MT8195_MCU_BIG_CPU1 1
-+#define MT8195_MCU_BIG_CPU2 2
-+#define MT8195_MCU_BIG_CPU3 3
-+#define MT8195_MCU_LITTLE_CPU0 4
-+#define MT8195_MCU_LITTLE_CPU1 5
-+#define MT8195_MCU_LITTLE_CPU2 6
-+#define MT8195_MCU_LITTLE_CPU3 7
-+
-+#endif /* __MEDIATEK_LVTS_DT_H */
+++ /dev/null
-From 05aaa7fdb0736262e224369b9b9f1410320fc71b Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Tue, 7 Mar 2023 16:45:21 +0100
-Subject: [PATCH] dt-bindings: thermal: mediatek: Add AP domain to LVTS thermal
- controllers for mt8195
-
-Add AP Domain to LVTS thermal controllers dt-binding definition for mt8195.
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Acked-by: Rob Herring <robh@kernel.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230307154524.118541-2-bchihi@baylibre.com
----
- include/dt-bindings/thermal/mediatek,lvts-thermal.h | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
-+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
-@@ -16,4 +16,14 @@
- #define MT8195_MCU_LITTLE_CPU2 6
- #define MT8195_MCU_LITTLE_CPU3 7
-
-+#define MT8195_AP_VPU0 8
-+#define MT8195_AP_VPU1 9
-+#define MT8195_AP_GPU0 10
-+#define MT8195_AP_GPU1 11
-+#define MT8195_AP_VDEC 12
-+#define MT8195_AP_IMG 13
-+#define MT8195_AP_INFRA 14
-+#define MT8195_AP_CAM0 15
-+#define MT8195_AP_CAM1 16
-+
- #endif /* __MEDIATEK_LVTS_DT_H */
+++ /dev/null
-From a6ff3c0021468721b96e84892a8cae24bde8d65f Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:29 +0100
-Subject: [PATCH] thermal/core: Add a thermal zone 'devdata' accessor
-
-The thermal zone device structure is exposed to the different drivers
-and obviously they access the internals while that should be
-restricted to the core thermal code.
-
-In order to self-encapsulate the thermal core code, we need to prevent
-the drivers accessing directly the thermal zone structure and provide
-accessor functions to deal with.
-
-Provide an accessor to the 'devdata' structure and make use of it in
-the different drivers.
-
-No functional changes intended.
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Acked-by: Mark Brown <broonie@kernel.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/thermal_core.c | 6 ++++++
- include/linux/thermal.h | 7 +++++++
- 2 files changed, 13 insertions(+)
-
---- a/drivers/thermal/thermal_core.c
-+++ b/drivers/thermal/thermal_core.c
-@@ -1346,6 +1346,12 @@ struct thermal_zone_device *thermal_zone
- }
- EXPORT_SYMBOL_GPL(thermal_zone_device_register);
-
-+void *thermal_zone_device_priv(struct thermal_zone_device *tzd)
-+{
-+ return tzd->devdata;
-+}
-+EXPORT_SYMBOL_GPL(thermal_zone_device_priv);
-+
- /**
- * thermal_zone_device_unregister - removes the registered thermal zone device
- * @tz: the thermal zone device to remove
---- a/include/linux/thermal.h
-+++ b/include/linux/thermal.h
-@@ -346,6 +346,8 @@ thermal_zone_device_register_with_trips(
- void *, struct thermal_zone_device_ops *,
- struct thermal_zone_params *, int, int);
-
-+void *thermal_zone_device_priv(struct thermal_zone_device *tzd);
-+
- int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
- struct thermal_cooling_device *,
- unsigned long, unsigned long,
-@@ -417,6 +419,11 @@ static inline int thermal_zone_get_offse
- struct thermal_zone_device *tz)
- { return -ENODEV; }
-
-+static inline void *thermal_zone_device_priv(struct thermal_zone_device *tz)
-+{
-+ return NULL;
-+}
-+
- static inline int thermal_zone_device_enable(struct thermal_zone_device *tz)
- { return -ENODEV; }
-
+++ /dev/null
-From 072e35c98806100182c0a7263cf4cba09ce43463 Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:38 +0100
-Subject: [PATCH] thermal/core: Add thermal_zone_device structure 'type'
- accessor
-
-The thermal zone device structure is exposed via the exported
-thermal.h header. This structure should stay private the thermal core
-code. In order to encapsulate the structure, let's add an accessor to
-get the 'type' of the thermal zone.
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/thermal_core.c | 6 ++++++
- include/linux/thermal.h | 6 ++++++
- 2 files changed, 12 insertions(+)
-
---- a/drivers/thermal/thermal_core.c
-+++ b/drivers/thermal/thermal_core.c
-@@ -1352,6 +1352,12 @@ void *thermal_zone_device_priv(struct th
- }
- EXPORT_SYMBOL_GPL(thermal_zone_device_priv);
-
-+const char *thermal_zone_device_type(struct thermal_zone_device *tzd)
-+{
-+ return tzd->type;
-+}
-+EXPORT_SYMBOL_GPL(thermal_zone_device_type);
-+
- /**
- * thermal_zone_device_unregister - removes the registered thermal zone device
- * @tz: the thermal zone device to remove
---- a/include/linux/thermal.h
-+++ b/include/linux/thermal.h
-@@ -347,6 +347,7 @@ thermal_zone_device_register_with_trips(
- struct thermal_zone_params *, int, int);
-
- void *thermal_zone_device_priv(struct thermal_zone_device *tzd);
-+const char *thermal_zone_device_type(struct thermal_zone_device *tzd);
-
- int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
- struct thermal_cooling_device *,
-@@ -423,6 +424,11 @@ static inline void *thermal_zone_device_
- {
- return NULL;
- }
-+
-+static inline const char *thermal_zone_device_type(struct thermal_zone_device *tzd)
-+{
-+ return NULL;
-+}
-
- static inline int thermal_zone_device_enable(struct thermal_zone_device *tz)
- { return -ENODEV; }
+++ /dev/null
-From 7d78bab533eb9aa0e5240e25a204e8f416723ed6 Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:30 +0100
-Subject: [PATCH 07/42] thermal/core: Use the thermal zone 'devdata' accessor
- in thermal located drivers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The thermal zone device structure is exposed to the different drivers
-and obviously they access the internals while that should be
-restricted to the core thermal code.
-
-In order to self-encapsulate the thermal core code, we need to prevent
-the drivers accessing directly the thermal zone structure and provide
-accessor functions to deal with.
-
-Use the devdata accessor introduced in the previous patch.
-
-No functional changes intended.
-
-[skipped drivers not relevant for mediatek target]
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car
-Acked-by: Mark Brown <broonie@kernel.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts
-Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts
-Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062
-Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread
-Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
-Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom
-Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap
-Acked-by: Linus Walleij <linus.walleij@linaro.org>
-Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip
-Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 2 +-
- drivers/thermal/mediatek/lvts_thermal.c | 4 ++--
- 43 files changed, 71 insertions(+), 73 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -763,7 +763,7 @@ static int mtk_thermal_bank_temperature(
-
- static int mtk_read_temp(struct thermal_zone_device *tz, int *temperature)
- {
-- struct mtk_thermal *mt = tz->devdata;
-+ struct mtk_thermal *mt = thermal_zone_device_priv(tz);
- int i;
- int tempmax = INT_MIN;
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -252,7 +252,7 @@ static u32 lvts_temp_to_raw(int temperat
-
- static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
- {
-- struct lvts_sensor *lvts_sensor = tz->devdata;
-+ struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
- void __iomem *msr = lvts_sensor->msr;
- u32 value;
-
-@@ -290,7 +290,7 @@ static int lvts_get_temp(struct thermal_
-
- static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
- {
-- struct lvts_sensor *lvts_sensor = tz->devdata;
-+ struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
- void __iomem *base = lvts_sensor->base;
- u32 raw_low = lvts_temp_to_raw(low);
- u32 raw_high = lvts_temp_to_raw(high);
+++ /dev/null
-From cc9c60e9cfeeac45d63361fa8c085c43c4bdfe3a Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:36 +0100
-Subject: [PATCH 08/42] thermal/hwmon: Use the right device for
- devm_thermal_add_hwmon_sysfs()
-
-The devres variant of thermal_add_hwmon_sysfs() only takes the thermal
-zone structure pointer as parameter.
-
-Actually, it uses the tz->device to add it in the devres list.
-
-It is preferable to use the device registering the thermal zone
-instead of the thermal zone device itself. That prevents the driver
-accessing the thermal zone structure internals and it is from my POV
-more correct regarding how devm_ is used.
-
-[skipped imx thermal which did not apply cleanly and irrelevant on
-mediatek target]
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal
-Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/amlogic_thermal.c | 2 +-
- drivers/thermal/imx_sc_thermal.c | 2 +-
- drivers/thermal/k3_bandgap.c | 2 +-
- drivers/thermal/mediatek/auxadc_thermal.c | 2 +-
- drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 2 +-
- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 2 +-
- drivers/thermal/qcom/tsens.c | 2 +-
- drivers/thermal/qoriq_thermal.c | 2 +-
- drivers/thermal/sun8i_thermal.c | 2 +-
- drivers/thermal/tegra/tegra30-tsensor.c | 2 +-
- drivers/thermal/thermal_hwmon.c | 4 ++--
- drivers/thermal/thermal_hwmon.h | 4 ++--
- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
- 13 files changed, 15 insertions(+), 15 deletions(-)
-
---- a/drivers/thermal/amlogic_thermal.c
-+++ b/drivers/thermal/amlogic_thermal.c
-@@ -286,7 +286,7 @@ static int amlogic_thermal_probe(struct
- return ret;
- }
-
-- if (devm_thermal_add_hwmon_sysfs(pdata->tzd))
-+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, pdata->tzd))
- dev_warn(&pdev->dev, "Failed to add hwmon sysfs attributes\n");
-
- ret = amlogic_thermal_initialize(pdata);
---- a/drivers/thermal/imx_sc_thermal.c
-+++ b/drivers/thermal/imx_sc_thermal.c
-@@ -120,7 +120,7 @@ static int imx_sc_thermal_probe(struct p
- return ret;
- }
-
-- if (devm_thermal_add_hwmon_sysfs(sensor->tzd))
-+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, sensor->tzd))
- dev_warn(&pdev->dev, "failed to add hwmon sysfs attributes\n");
- }
-
---- a/drivers/thermal/k3_bandgap.c
-+++ b/drivers/thermal/k3_bandgap.c
-@@ -222,7 +222,7 @@ static int k3_bandgap_probe(struct platf
- goto err_alloc;
- }
-
-- if (devm_thermal_add_hwmon_sysfs(data[id].tzd))
-+ if (devm_thermal_add_hwmon_sysfs(dev, data[id].tzd))
- dev_warn(dev, "Failed to add hwmon sysfs attributes\n");
- }
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1210,7 +1210,7 @@ static int mtk_thermal_probe(struct plat
- goto err_disable_clk_peri_therm;
- }
-
-- ret = devm_thermal_add_hwmon_sysfs(tzdev);
-+ ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
- if (ret)
- dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
-
---- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
-+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
-@@ -688,7 +688,7 @@ static int adc_tm5_register_tzd(struct a
- return PTR_ERR(tzd);
- }
- adc_tm->channels[i].tzd = tzd;
-- if (devm_thermal_add_hwmon_sysfs(tzd))
-+ if (devm_thermal_add_hwmon_sysfs(adc_tm->dev, tzd))
- dev_warn(adc_tm->dev,
- "Failed to add hwmon sysfs attributes\n");
- }
---- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
-+++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c
-@@ -460,7 +460,7 @@ static int qpnp_tm_probe(struct platform
- return ret;
- }
-
-- if (devm_thermal_add_hwmon_sysfs(chip->tz_dev))
-+ if (devm_thermal_add_hwmon_sysfs(&pdev->dev, chip->tz_dev))
- dev_warn(&pdev->dev,
- "Failed to add hwmon sysfs attributes\n");
-
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -1056,7 +1056,7 @@ static int tsens_register(struct tsens_p
- if (priv->ops->enable)
- priv->ops->enable(priv, i);
-
-- if (devm_thermal_add_hwmon_sysfs(tzd))
-+ if (devm_thermal_add_hwmon_sysfs(priv->dev, tzd))
- dev_warn(priv->dev,
- "Failed to add hwmon sysfs attributes\n");
- }
---- a/drivers/thermal/qoriq_thermal.c
-+++ b/drivers/thermal/qoriq_thermal.c
-@@ -158,7 +158,7 @@ static int qoriq_tmu_register_tmu_zone(s
- return ret;
- }
-
-- if (devm_thermal_add_hwmon_sysfs(tzd))
-+ if (devm_thermal_add_hwmon_sysfs(dev, tzd))
- dev_warn(dev,
- "Failed to add hwmon sysfs attributes\n");
-
---- a/drivers/thermal/sun8i_thermal.c
-+++ b/drivers/thermal/sun8i_thermal.c
-@@ -468,7 +468,7 @@ static int sun8i_ths_register(struct ths
- if (IS_ERR(tmdev->sensor[i].tzd))
- return PTR_ERR(tmdev->sensor[i].tzd);
-
-- if (devm_thermal_add_hwmon_sysfs(tmdev->sensor[i].tzd))
-+ if (devm_thermal_add_hwmon_sysfs(tmdev->dev, tmdev->sensor[i].tzd))
- dev_warn(tmdev->dev,
- "Failed to add hwmon sysfs attributes\n");
- }
---- a/drivers/thermal/tegra/tegra30-tsensor.c
-+++ b/drivers/thermal/tegra/tegra30-tsensor.c
-@@ -530,7 +530,7 @@ static int tegra_tsensor_register_channe
- return 0;
- }
-
-- if (devm_thermal_add_hwmon_sysfs(tsc->tzd))
-+ if (devm_thermal_add_hwmon_sysfs(ts->dev, tsc->tzd))
- dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
-
- return 0;
---- a/drivers/thermal/thermal_hwmon.c
-+++ b/drivers/thermal/thermal_hwmon.c
-@@ -255,7 +255,7 @@ static void devm_thermal_hwmon_release(s
- thermal_remove_hwmon_sysfs(*(struct thermal_zone_device **)res);
- }
-
--int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
-+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
- {
- struct thermal_zone_device **ptr;
- int ret;
-@@ -272,7 +272,7 @@ int devm_thermal_add_hwmon_sysfs(struct
- }
-
- *ptr = tz;
-- devres_add(&tz->device, ptr);
-+ devres_add(dev, ptr);
-
- return ret;
- }
---- a/drivers/thermal/thermal_hwmon.h
-+++ b/drivers/thermal/thermal_hwmon.h
-@@ -17,7 +17,7 @@
-
- #ifdef CONFIG_THERMAL_HWMON
- int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
--int devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz);
-+int devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz);
- void thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz);
- #else
- static inline int
-@@ -27,7 +27,7 @@ thermal_add_hwmon_sysfs(struct thermal_z
- }
-
- static inline int
--devm_thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
-+devm_thermal_add_hwmon_sysfs(struct device *dev, struct thermal_zone_device *tz)
- {
- return 0;
- }
---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-@@ -182,7 +182,7 @@ int ti_thermal_expose_sensor(struct ti_b
- ti_bandgap_set_sensor_data(bgp, id, data);
- ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
-
-- if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
-+ if (devm_thermal_add_hwmon_sysfs(bgp->dev, data->ti_thermal))
- dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");
-
- return 0;
+++ /dev/null
-From 5a72b8e4bac753e4dc74dc0a1335d120f63df97a Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:37 +0100
-Subject: [PATCH 09/42] thermal: Don't use 'device' internal thermal zone
- structure field
-
-Some drivers are directly using the thermal zone's 'device' structure
-field.
-
-Use the driver device pointer instead of the thermal zone device when
-it is available.
-
-Remove the traces when they are duplicate with the traces in the core
-code.
-
-[again skipped imx_thermal.c]
-
-Cc: Jean Delvare <jdelvare@suse.com>
-Cc: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek LVTS
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/thermal/mediatek/lvts_thermal.c | 4 ++--
- drivers/thermal/thermal_hwmon.c | 4 ++--
- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
- 3 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -305,7 +305,7 @@ static int lvts_set_trips(struct thermal
- * 14-0 : Raw temperature for threshold
- */
- if (low != -INT_MAX) {
-- dev_dbg(&tz->device, "Setting low limit temperature interrupt: %d\n", low);
-+ pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low);
- writel(raw_low, LVTS_H2NTHRE(base));
- }
-
-@@ -318,7 +318,7 @@ static int lvts_set_trips(struct thermal
- *
- * 14-0 : Raw temperature for threshold
- */
-- dev_dbg(&tz->device, "Setting high limit temperature interrupt: %d\n", high);
-+ pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high);
- writel(raw_high, LVTS_HTHRE(base));
-
- return 0;
---- a/drivers/thermal/thermal_hwmon.c
-+++ b/drivers/thermal/thermal_hwmon.c
-@@ -220,14 +220,14 @@ void thermal_remove_hwmon_sysfs(struct t
- hwmon = thermal_hwmon_lookup_by_type(tz);
- if (unlikely(!hwmon)) {
- /* Should never happen... */
-- dev_dbg(&tz->device, "hwmon device lookup failed!\n");
-+ dev_dbg(hwmon->device, "hwmon device lookup failed!\n");
- return;
- }
-
- temp = thermal_hwmon_lookup_temp(hwmon, tz);
- if (unlikely(!temp)) {
- /* Should never happen... */
-- dev_dbg(&tz->device, "temperature input lookup failed!\n");
-+ dev_dbg(hwmon->device, "temperature input lookup failed!\n");
- return;
- }
-
---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-@@ -43,7 +43,7 @@ static void ti_thermal_work(struct work_
-
- thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
-
-- dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n",
-+ dev_dbg(data->bgp->dev, "updated thermal zone %s\n",
- data->ti_thermal->type);
- }
-
+++ /dev/null
-From 66b3a292d3fc749e8ec7ac5278a17e8a5757ecbc Mon Sep 17 00:00:00 2001
-From: Daniel Lezcano <daniel.lezcano@linaro.org>
-Date: Wed, 1 Mar 2023 21:14:41 +0100
-Subject: [PATCH 10/42] thermal: Use thermal_zone_device_type() accessor
-
-Replace the accesses to 'tz->type' by its accessor version in order to
-self-encapsulate the thermal_zone_device structure.
-
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Reviewed-by: Ido Schimmel <idosch@nvidia.com> #mlxsw
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek LVTS
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 2 +-
- drivers/thermal/mediatek/lvts_thermal.c | 6 ++++--
- drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 2 +-
- 3 files changed, 6 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
-+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
-@@ -168,7 +168,7 @@ mlxsw_thermal_module_trips_update(struct
-
- if (crit_temp > emerg_temp) {
- dev_warn(dev, "%s : Critical threshold %d is above emergency threshold %d\n",
-- tz->tzdev->type, crit_temp, emerg_temp);
-+ thermal_zone_device_type(tz->tzdev), crit_temp, emerg_temp);
- return 0;
- }
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -305,7 +305,8 @@ static int lvts_set_trips(struct thermal
- * 14-0 : Raw temperature for threshold
- */
- if (low != -INT_MAX) {
-- pr_debug("%s: Setting low limit temperature interrupt: %d\n", tz->type, low);
-+ pr_debug("%s: Setting low limit temperature interrupt: %d\n",
-+ thermal_zone_device_type(tz), low);
- writel(raw_low, LVTS_H2NTHRE(base));
- }
-
-@@ -318,7 +319,8 @@ static int lvts_set_trips(struct thermal
- *
- * 14-0 : Raw temperature for threshold
- */
-- pr_debug("%s: Setting high limit temperature interrupt: %d\n", tz->type, high);
-+ pr_debug("%s: Setting high limit temperature interrupt: %d\n",
-+ thermal_zone_device_type(tz), high);
- writel(raw_high, LVTS_HTHRE(base));
-
- return 0;
---- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-+++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
-@@ -44,7 +44,7 @@ static void ti_thermal_work(struct work_
- thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);
-
- dev_dbg(data->bgp->dev, "updated thermal zone %s\n",
-- data->ti_thermal->type);
-+ thermal_zone_device_type(data->ti_thermal));
- }
-
- /**
+++ /dev/null
-From f6658c1c4ae98477d6be00495226c0617354fe76 Mon Sep 17 00:00:00 2001
-From: Markus Schneider-Pargmann <msp@baylibre.com>
-Date: Fri, 27 Jan 2023 16:44:43 +0100
-Subject: [PATCH 11/42] thermal/drivers/mediatek: Control buffer enablement
- tweaks
-
-Add logic in order to be able to turn on the control buffer on MT8365.
-This change now allows to have control buffer support for MTK_THERMAL_V1,
-and it allows to define the register offset, and mask used to enable it.
-
-Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
-Signed-off-by: Fabien Parent <fparent@baylibre.com>
-Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-2-55a1ae14af74@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 28 +++++++++++++++--------
- 1 file changed, 19 insertions(+), 9 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -307,6 +307,9 @@ struct mtk_thermal_data {
- bool need_switch_bank;
- struct thermal_bank_cfg bank_data[MAX_NUM_ZONES];
- enum mtk_thermal_version version;
-+ u32 apmixed_buffer_ctl_reg;
-+ u32 apmixed_buffer_ctl_mask;
-+ u32 apmixed_buffer_ctl_set;
- };
-
- struct mtk_thermal {
-@@ -560,6 +563,9 @@ static const struct mtk_thermal_data mt7
- .adcpnp = mt7622_adcpnp,
- .sensor_mux_values = mt7622_mux_values,
- .version = MTK_THERMAL_V2,
-+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON1,
-+ .apmixed_buffer_ctl_mask = GENMASK(31, 6) | BIT(3),
-+ .apmixed_buffer_ctl_set = BIT(0),
- };
-
- /*
-@@ -1079,14 +1085,18 @@ static const struct of_device_id mtk_the
- };
- MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
-
--static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
-+static void mtk_thermal_turn_on_buffer(struct mtk_thermal *mt,
-+ void __iomem *apmixed_base)
- {
-- int tmp;
-+ u32 tmp;
-+
-+ if (!mt->conf->apmixed_buffer_ctl_reg)
-+ return;
-
-- tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
-- tmp &= ~(0x37);
-- tmp |= 0x1;
-- writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
-+ tmp = readl(apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
-+ tmp &= mt->conf->apmixed_buffer_ctl_mask;
-+ tmp |= mt->conf->apmixed_buffer_ctl_set;
-+ writel(tmp, apmixed_base + mt->conf->apmixed_buffer_ctl_reg);
- udelay(200);
- }
-
-@@ -1184,10 +1194,10 @@ static int mtk_thermal_probe(struct plat
- goto err_disable_clk_auxadc;
- }
-
-- if (mt->conf->version != MTK_THERMAL_V1) {
-- mtk_thermal_turn_on_buffer(apmixed_base);
-+ mtk_thermal_turn_on_buffer(mt, apmixed_base);
-+
-+ if (mt->conf->version != MTK_THERMAL_V2)
- mtk_thermal_release_periodic_ts(mt, auxadc_base);
-- }
-
- if (mt->conf->version == MTK_THERMAL_V1)
- mt->raw_to_mcelsius = raw_to_mcelsius_v1;
+++ /dev/null
-From c4eff784465f88218dc5eb51320320464db83d3f Mon Sep 17 00:00:00 2001
-From: Fabien Parent <fparent@baylibre.com>
-Date: Fri, 27 Jan 2023 16:44:44 +0100
-Subject: [PATCH 12/42] thermal/drivers/mediatek: Add support for MT8365 SoC
-
-MT8365 is similar to the other SoCs supported by the driver. It has only
-one bank and 3 actual sensors that can be multiplexed. There is another
-one sensor that does not have usable data.
-
-Signed-off-by: Fabien Parent <fparent@baylibre.com>
-Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-3-55a1ae14af74@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 68 +++++++++++++++++++++++
- 1 file changed, 68 insertions(+)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -31,6 +31,7 @@
- #define AUXADC_CON2_V 0x010
- #define AUXADC_DATA(channel) (0x14 + (channel) * 4)
-
-+#define APMIXED_SYS_TS_CON0 0x600
- #define APMIXED_SYS_TS_CON1 0x604
-
- /* Thermal Controller Registers */
-@@ -281,6 +282,17 @@ enum mtk_thermal_version {
- /* The calibration coefficient of sensor */
- #define MT7986_CALIBRATION 165
-
-+/* MT8365 */
-+#define MT8365_TEMP_AUXADC_CHANNEL 11
-+#define MT8365_CALIBRATION 164
-+#define MT8365_NUM_CONTROLLER 1
-+#define MT8365_NUM_BANKS 1
-+#define MT8365_NUM_SENSORS 3
-+#define MT8365_NUM_SENSORS_PER_ZONE 3
-+#define MT8365_TS1 0
-+#define MT8365_TS2 1
-+#define MT8365_TS3 2
-+
- struct mtk_thermal;
-
- struct thermal_bank_cfg {
-@@ -435,6 +447,24 @@ static const int mt7986_mux_values[MT798
- static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
- static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
-
-+/* MT8365 thermal sensor data */
-+static const int mt8365_bank_data[MT8365_NUM_SENSORS] = {
-+ MT8365_TS1, MT8365_TS2, MT8365_TS3
-+};
-+
-+static const int mt8365_msr[MT8365_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_MSR0, TEMP_MSR1, TEMP_MSR2
-+};
-+
-+static const int mt8365_adcpnp[MT8365_NUM_SENSORS_PER_ZONE] = {
-+ TEMP_ADCPNP0, TEMP_ADCPNP1, TEMP_ADCPNP2
-+};
-+
-+static const int mt8365_mux_values[MT8365_NUM_SENSORS] = { 0, 1, 2 };
-+static const int mt8365_tc_offset[MT8365_NUM_CONTROLLER] = { 0 };
-+
-+static const int mt8365_vts_index[MT8365_NUM_SENSORS] = { VTS1, VTS2, VTS3 };
-+
- /*
- * The MT8173 thermal controller has four banks. Each bank can read up to
- * four temperature sensors simultaneously. The MT8173 has a total of 5
-@@ -510,6 +540,40 @@ static const struct mtk_thermal_data mt2
- };
-
- /*
-+ * The MT8365 thermal controller has one bank, which can read up to
-+ * four temperature sensors simultaneously. The MT8365 has a total of 3
-+ * temperature sensors.
-+ *
-+ * The thermal core only gets the maximum temperature of this one bank,
-+ * so the bank concept wouldn't be necessary here. However, the SVS (Smart
-+ * Voltage Scaling) unit makes its decisions based on the same bank
-+ * data.
-+ */
-+static const struct mtk_thermal_data mt8365_thermal_data = {
-+ .auxadc_channel = MT8365_TEMP_AUXADC_CHANNEL,
-+ .num_banks = MT8365_NUM_BANKS,
-+ .num_sensors = MT8365_NUM_SENSORS,
-+ .vts_index = mt8365_vts_index,
-+ .cali_val = MT8365_CALIBRATION,
-+ .num_controller = MT8365_NUM_CONTROLLER,
-+ .controller_offset = mt8365_tc_offset,
-+ .need_switch_bank = false,
-+ .bank_data = {
-+ {
-+ .num_sensors = MT8365_NUM_SENSORS,
-+ .sensors = mt8365_bank_data
-+ },
-+ },
-+ .msr = mt8365_msr,
-+ .adcpnp = mt8365_adcpnp,
-+ .sensor_mux_values = mt8365_mux_values,
-+ .version = MTK_THERMAL_V1,
-+ .apmixed_buffer_ctl_reg = APMIXED_SYS_TS_CON0,
-+ .apmixed_buffer_ctl_mask = (u32) ~GENMASK(29, 28),
-+ .apmixed_buffer_ctl_set = 0,
-+};
-+
-+/*
- * The MT2712 thermal controller has one bank, which can read up to
- * four temperature sensors simultaneously. The MT2712 has a total of 4
- * temperature sensors.
-@@ -1080,6 +1144,10 @@ static const struct of_device_id mtk_the
- {
- .compatible = "mediatek,mt8183-thermal",
- .data = (void *)&mt8183_thermal_data,
-+ },
-+ {
-+ .compatible = "mediatek,mt8365-thermal",
-+ .data = (void *)&mt8365_thermal_data,
- }, {
- },
- };
+++ /dev/null
-From 4eead70db74922bc61e9d0b4591524369a335751 Mon Sep 17 00:00:00 2001
-From: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Date: Fri, 27 Jan 2023 16:44:46 +0100
-Subject: [PATCH 13/42] thermal/drivers/mediatek: Add delay after thermal banks
- initialization
-
-Thermal sensor reads performed immediately after thermal bank
-initialization returns bogus values. This is currently tackled by returning
-0 if the temperature is bogus (exceeding 200000).
-
-Instead, add a delay between the bank init and the thermal zone device
-register to properly fix this.
-
-Signed-off-by: Michael Kao <michael.kao@mediatek.com>
-Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
-Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20221018-up-i350-thermal-bringup-v9-5-55a1ae14af74@baylibre.com
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
----
- drivers/thermal/mediatek/auxadc_thermal.c | 11 +++--------
- 1 file changed, 3 insertions(+), 8 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -816,14 +816,6 @@ static int mtk_thermal_bank_temperature(
- mt, conf->bank_data[bank->id].sensors[i], raw);
-
-
-- /*
-- * The first read of a sensor often contains very high bogus
-- * temperature value. Filter these out so that the system does
-- * not immediately shut down.
-- */
-- if (temp > 200000)
-- temp = 0;
--
- if (temp > max)
- max = temp;
- }
-@@ -1281,6 +1273,9 @@ static int mtk_thermal_probe(struct plat
-
- platform_set_drvdata(pdev, mt);
-
-+ /* Delay for thermal banks to be ready */
-+ msleep(30);
-+
- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
- &mtk_thermal_ops);
- if (IS_ERR(tzdev)) {
+++ /dev/null
-From ad9dc9e92367803a4f9576aea0dab110d03fc510 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wenst@chromium.org>
-Date: Tue, 28 Mar 2023 11:10:17 +0800
-Subject: [PATCH 14/42] thermal/drivers/mediatek/lvts_thermal: Fix sensor 1
- interrupt status bitmask
-
-The binary representation for sensor 1 interrupt status was incorrectly
-assembled, when compared to the full table given in the same comment
-section. The conversion into hex was also incorrect, leading to
-incorrect interrupt status bitmask for sensor 1. This would cause the
-driver to incorrectly identify changes for sensor 1, when in fact it
-was sensor 0, or a sensor access time out.
-
-Fix the binary and hex representations in the comments, and the actual
-bitmask macro.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230328031017.1360976-1-wenst@chromium.org
----
- drivers/thermal/mediatek/lvts_thermal.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -66,7 +66,7 @@
- #define LVTS_MONINT_CONF 0x9FBF7BDE
-
- #define LVTS_INT_SENSOR0 0x0009001F
--#define LVTS_INT_SENSOR1 0X000881F0
-+#define LVTS_INT_SENSOR1 0x001203E0
- #define LVTS_INT_SENSOR2 0x00247C00
- #define LVTS_INT_SENSOR3 0x1FC00000
-
-@@ -395,8 +395,8 @@ static irqreturn_t lvts_ctrl_irq_handler
- * => 0x1FC00000
- * sensor 2 interrupt: 0000 0000 0010 0100 0111 1100 0000 0000
- * => 0x00247C00
-- * sensor 1 interrupt: 0000 0000 0001 0001 0000 0011 1110 0000
-- * => 0X000881F0
-+ * sensor 1 interrupt: 0000 0000 0001 0010 0000 0011 1110 0000
-+ * => 0X001203E0
- * sensor 0 interrupt: 0000 0000 0000 1001 0000 0000 0001 1111
- * => 0x0009001F
- */
+++ /dev/null
-From 9aad43ad3285fc21158fb416830a6156a9a31fa5 Mon Sep 17 00:00:00 2001
-From: Balsam CHIHI <bchihi@baylibre.com>
-Date: Tue, 7 Mar 2023 16:45:22 +0100
-Subject: [PATCH 15/42] thermal/drivers/mediatek/lvts_thermal: Add AP domain
- for mt8195
-
-Add MT8195 AP Domain support to LVTS Driver.
-
-Take the opportunity to update the comments to show calibration data
-information related to the new domain.
-
-[dlezcano]: Massaged a bit the changelog
-
-Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230307154524.118541-3-bchihi@baylibre.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 94 +++++++++++++++++++------
- 1 file changed, 74 insertions(+), 20 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -530,29 +530,33 @@ static int lvts_sensor_init(struct devic
- * The efuse blob values follows the sensor enumeration per thermal
- * controller. The decoding of the stream is as follow:
- *
-- * <--?-> <----big0 ???---> <-sensor0-> <-0->
-- * ------------------------------------------
-- * index in the stream: : | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 |
-- * ------------------------------------------
-+ * stream index map for MCU Domain :
- *
-- * <--sensor1--><-0-> <----big1 ???---> <-sen
-- * ------------------------------------------
-- * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-- * ------------------------------------------
-+ * <-----mcu-tc#0-----> <-----sensor#0-----> <-----sensor#1----->
-+ * 0x01 | 0x02 | 0x03 | 0x04 | 0x05 | 0x06 | 0x07 | 0x08 | 0x09
- *
-- * sor0-> <-0-> <-sensor1-> <-0-> ..........
-- * ------------------------------------------
-- * | 0x7 | 0x8 | 0x9 | 0xA | 0xB | OxC | OxD |
-- * ------------------------------------------
-+ * <-----mcu-tc#1-----> <-----sensor#2-----> <-----sensor#3----->
-+ * 0x0A | 0x0B | 0x0C | 0x0D | 0x0E | 0x0F | 0x10 | 0x11 | 0x12
- *
-- * And so on ...
-+ * <-----mcu-tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6-----> <-----sensor#7----->
-+ * 0x13 | 0x14 | 0x15 | 0x16 | 0x17 | 0x18 | 0x19 | 0x1A | 0x1B | 0x1C | 0x1D | 0x1E | 0x1F | 0x20 | 0x21
-+ *
-+ * stream index map for AP Domain :
-+ *
-+ * <-----ap--tc#0-----> <-----sensor#0-----> <-----sensor#1----->
-+ * 0x22 | 0x23 | 0x24 | 0x25 | 0x26 | 0x27 | 0x28 | 0x29 | 0x2A
-+ *
-+ * <-----ap--tc#1-----> <-----sensor#2-----> <-----sensor#3----->
-+ * 0x2B | 0x2C | 0x2D | 0x2E | 0x2F | 0x30 | 0x31 | 0x32 | 0x33
-+ *
-+ * <-----ap--tc#2-----> <-----sensor#4-----> <-----sensor#5-----> <-----sensor#6----->
-+ * 0x34 | 0x35 | 0x36 | 0x37 | 0x38 | 0x39 | 0x3A | 0x3B | 0x3C | 0x3D | 0x3E | 0x3F
-+ *
-+ * <-----ap--tc#3-----> <-----sensor#7-----> <-----sensor#8----->
-+ * 0x40 | 0x41 | 0x42 | 0x43 | 0x44 | 0x45 | 0x46 | 0x47 | 0x48
- *
- * The data description gives the offset of the calibration data in
- * this bytes stream for each sensor.
-- *
-- * Each thermal controller can handle up to 4 sensors max, we don't
-- * care if there are less as the array of calibration is sized to 4
-- * anyway. The unused sensor slot will be zeroed.
- */
- static int lvts_calibration_init(struct device *dev, struct lvts_ctrl *lvts_ctrl,
- const struct lvts_ctrl_data *lvts_ctrl_data,
-@@ -1165,7 +1169,7 @@ static int lvts_remove(struct platform_d
- return 0;
- }
-
--static const struct lvts_ctrl_data mt8195_lvts_data_ctrl[] = {
-+static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
- {
- .cal_offset = { 0x04, 0x07 },
- .lvts_sensor = {
-@@ -1200,13 +1204,63 @@ static const struct lvts_ctrl_data mt819
- }
- };
-
-+static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
-+ {
-+ .cal_offset = { 0x25, 0x28 },
-+ .lvts_sensor = {
-+ { .dt_id = MT8195_AP_VPU0 },
-+ { .dt_id = MT8195_AP_VPU1 }
-+ },
-+ .num_lvts_sensor = 2,
-+ .offset = 0x0,
-+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+ },
-+ {
-+ .cal_offset = { 0x2e, 0x31 },
-+ .lvts_sensor = {
-+ { .dt_id = MT8195_AP_GPU0 },
-+ { .dt_id = MT8195_AP_GPU1 }
-+ },
-+ .num_lvts_sensor = 2,
-+ .offset = 0x100,
-+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+ },
-+ {
-+ .cal_offset = { 0x37, 0x3a, 0x3d },
-+ .lvts_sensor = {
-+ { .dt_id = MT8195_AP_VDEC },
-+ { .dt_id = MT8195_AP_IMG },
-+ { .dt_id = MT8195_AP_INFRA },
-+ },
-+ .num_lvts_sensor = 3,
-+ .offset = 0x200,
-+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+ },
-+ {
-+ .cal_offset = { 0x43, 0x46 },
-+ .lvts_sensor = {
-+ { .dt_id = MT8195_AP_CAM0 },
-+ { .dt_id = MT8195_AP_CAM1 }
-+ },
-+ .num_lvts_sensor = 2,
-+ .offset = 0x300,
-+ .hw_tshut_temp = LVTS_HW_SHUTDOWN_MT8195,
-+ }
-+};
-+
- static const struct lvts_data mt8195_lvts_mcu_data = {
-- .lvts_ctrl = mt8195_lvts_data_ctrl,
-- .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_data_ctrl),
-+ .lvts_ctrl = mt8195_lvts_mcu_data_ctrl,
-+ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
-+};
-+
-+static const struct lvts_data mt8195_lvts_ap_data = {
-+ .lvts_ctrl = mt8195_lvts_ap_data_ctrl,
-+ .num_lvts_ctrl = ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
- };
-
- static const struct of_device_id lvts_of_match[] = {
- { .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
-+ { .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
- {},
- };
- MODULE_DEVICE_TABLE(of, lvts_of_match);
+++ /dev/null
-From 7105a86760bd9e4d107075cefc75016b693a5542 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Wed, 19 Apr 2023 08:11:45 +0200
-Subject: [PATCH 16/42] Revert "thermal/drivers/mediatek: Add delay after
- thermal banks initialization"
-
-Some more testing revealed that this commit introduces a regression on some
-MT8173 Chromebooks and at least on one MT6795 Sony Xperia M5 smartphone due
-to the delay being apparently variable and machine specific.
-
-Another solution would be to delay for a bit more (~70ms) but this is not
-feasible for two reasons: first of all, we're adding an even bigger delay
-in a probe function; second, some machines need less, some may need even
-more, making the msleep at probe solution highly suboptimal.
-
-This reverts commit 10debf8c2da8011c8009dd4b3f6d0ab85891c81b.
-
-Fixes: 10debf8c2da8 ("thermal/drivers/mediatek: Add delay after thermal banks initialization")
-Reported-by: "kernelci.org bot" <bot@kernelci.org>
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419061146.22246-2-angelogioacchino.delregno@collabora.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 11 ++++++++---
- 1 file changed, 8 insertions(+), 3 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -816,6 +816,14 @@ static int mtk_thermal_bank_temperature(
- mt, conf->bank_data[bank->id].sensors[i], raw);
-
-
-+ /*
-+ * The first read of a sensor often contains very high bogus
-+ * temperature value. Filter these out so that the system does
-+ * not immediately shut down.
-+ */
-+ if (temp > 200000)
-+ temp = 0;
-+
- if (temp > max)
- max = temp;
- }
-@@ -1273,9 +1281,6 @@ static int mtk_thermal_probe(struct plat
-
- platform_set_drvdata(pdev, mt);
-
-- /* Delay for thermal banks to be ready */
-- msleep(30);
--
- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
- &mtk_thermal_ops);
- if (IS_ERR(tzdev)) {
+++ /dev/null
-From 681b652c9dfc4037d4a55b2733e091a4e1a5de18 Mon Sep 17 00:00:00 2001
-From: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Date: Wed, 19 Apr 2023 08:11:46 +0200
-Subject: [PATCH 17/42] thermal/drivers/mediatek: Add temperature constraints
- to validate read
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The AUXADC thermal v1 allows reading temperature range between -20°C to
-150°C and any value out of this range is invalid.
-
-Add new definitions for MT8173_TEMP_{MIN_MAX} and a new small helper
-mtk_thermal_temp_is_valid() to check if new readings are in range: if
-not, we tell to the API that the reading is invalid by returning
-THERMAL_TEMP_INVALID.
-
-It was chosen to introduce the helper function because, even though this
-temperature range is realistically ok for all, it comes from a downstream
-kernel driver for version 1, but here we also support v2 and v3 which may
-may have wider constraints.
-
-Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419061146.22246-3-angelogioacchino.delregno@collabora.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 24 +++++++++++++++++------
- 1 file changed, 18 insertions(+), 6 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -116,6 +116,10 @@
- /* The calibration coefficient of sensor */
- #define MT8173_CALIBRATION 165
-
-+/* Valid temperatures range */
-+#define MT8173_TEMP_MIN -20000
-+#define MT8173_TEMP_MAX 150000
-+
- /*
- * Layout of the fuses providing the calibration data
- * These macros could be used for MT8183, MT8173, MT2701, and MT2712.
-@@ -689,6 +693,11 @@ static const struct mtk_thermal_data mt7
- .version = MTK_THERMAL_V3,
- };
-
-+static bool mtk_thermal_temp_is_valid(int temp)
-+{
-+ return (temp >= MT8173_TEMP_MIN) && (temp <= MT8173_TEMP_MAX);
-+}
-+
- /**
- * raw_to_mcelsius_v1 - convert a raw ADC value to mcelsius
- * @mt: The thermal controller
-@@ -815,14 +824,17 @@ static int mtk_thermal_bank_temperature(
- temp = mt->raw_to_mcelsius(
- mt, conf->bank_data[bank->id].sensors[i], raw);
-
--
- /*
-- * The first read of a sensor often contains very high bogus
-- * temperature value. Filter these out so that the system does
-- * not immediately shut down.
-+ * Depending on the filt/sen intervals and ADC polling time,
-+ * we may need up to 60 milliseconds after initialization: this
-+ * will result in the first reading containing an out of range
-+ * temperature value.
-+ * Validate the reading to both address the aforementioned issue
-+ * and to eventually avoid bogus readings during runtime in the
-+ * event that the AUXADC gets unstable due to high EMI, etc.
- */
-- if (temp > 200000)
-- temp = 0;
-+ if (!mtk_thermal_temp_is_valid(temp))
-+ temp = THERMAL_TEMP_INVALID;
-
- if (temp > max)
- max = temp;
+++ /dev/null
-From 458fa1d508de3f17e49d974a0158d9aeff273a58 Mon Sep 17 00:00:00 2001
-From: Kang Chen <void0red@hust.edu.cn>
-Date: Wed, 19 Apr 2023 10:07:48 +0800
-Subject: [PATCH 18/42] thermal/drivers/mediatek: Use devm_of_iomap to avoid
- resource leak in mtk_thermal_probe
-
-Smatch reports:
-1. mtk_thermal_probe() warn: 'apmixed_base' from of_iomap() not released.
-2. mtk_thermal_probe() warn: 'auxadc_base' from of_iomap() not released.
-
-The original code forgets to release iomap resource when handling errors,
-fix it by switch to devm_of_iomap.
-
-Fixes: 89945047b166 ("thermal: mediatek: Add tsensor support for V2 thermal system")
-Signed-off-by: Kang Chen <void0red@hust.edu.cn>
-Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419020749.621257-1-void0red@hust.edu.cn
----
- drivers/thermal/mediatek/auxadc_thermal.c | 14 ++++++++++++--
- 1 file changed, 12 insertions(+), 2 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1232,7 +1232,12 @@ static int mtk_thermal_probe(struct plat
- return -ENODEV;
- }
-
-- auxadc_base = of_iomap(auxadc, 0);
-+ auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL);
-+ if (IS_ERR(auxadc_base)) {
-+ of_node_put(auxadc);
-+ return PTR_ERR(auxadc_base);
-+ }
-+
- auxadc_phys_base = of_get_phys_base(auxadc);
-
- of_node_put(auxadc);
-@@ -1248,7 +1253,12 @@ static int mtk_thermal_probe(struct plat
- return -ENODEV;
- }
-
-- apmixed_base = of_iomap(apmixedsys, 0);
-+ apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL);
-+ if (IS_ERR(apmixed_base)) {
-+ of_node_put(apmixedsys);
-+ return PTR_ERR(apmixed_base);
-+ }
-+
- apmixed_phys_base = of_get_phys_base(apmixedsys);
-
- of_node_put(apmixedsys);
+++ /dev/null
-From 227d1856924ec00a4f5bdf5afcf77bc7f3f04e86 Mon Sep 17 00:00:00 2001
-From: Kang Chen <void0red@hust.edu.cn>
-Date: Wed, 19 Apr 2023 10:07:49 +0800
-Subject: [PATCH 19/42] thermal/drivers/mediatek: Change clk_prepare_enable to
- devm_clk_get_enabled in mtk_thermal_probe
-
-Use devm_clk_get_enabled to do automatic resource management.
-Meanwhile, remove error handling labels in the probe function and
-the whole remove function.
-
-Signed-off-by: Kang Chen <void0red@hust.edu.cn>
-Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230419020749.621257-2-void0red@hust.edu.cn
----
- drivers/thermal/mediatek/auxadc_thermal.c | 44 +++++------------------
- 1 file changed, 9 insertions(+), 35 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1206,14 +1206,6 @@ static int mtk_thermal_probe(struct plat
-
- mt->conf = of_device_get_match_data(&pdev->dev);
-
-- mt->clk_peri_therm = devm_clk_get(&pdev->dev, "therm");
-- if (IS_ERR(mt->clk_peri_therm))
-- return PTR_ERR(mt->clk_peri_therm);
--
-- mt->clk_auxadc = devm_clk_get(&pdev->dev, "auxadc");
-- if (IS_ERR(mt->clk_auxadc))
-- return PTR_ERR(mt->clk_auxadc);
--
- mt->thermal_base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
- if (IS_ERR(mt->thermal_base))
- return PTR_ERR(mt->thermal_base);
-@@ -1272,16 +1264,18 @@ static int mtk_thermal_probe(struct plat
- if (ret)
- return ret;
-
-- ret = clk_prepare_enable(mt->clk_auxadc);
-- if (ret) {
-+ mt->clk_auxadc = devm_clk_get_enabled(&pdev->dev, "auxadc");
-+ if (IS_ERR(mt->clk_auxadc)) {
-+ ret = PTR_ERR(mt->clk_auxadc);
- dev_err(&pdev->dev, "Can't enable auxadc clk: %d\n", ret);
- return ret;
- }
-
-- ret = clk_prepare_enable(mt->clk_peri_therm);
-- if (ret) {
-+ mt->clk_peri_therm = devm_clk_get_enabled(&pdev->dev, "therm");
-+ if (IS_ERR(mt->clk_peri_therm)) {
-+ ret = PTR_ERR(mt->clk_peri_therm);
- dev_err(&pdev->dev, "Can't enable peri clk: %d\n", ret);
-- goto err_disable_clk_auxadc;
-+ return ret;
- }
-
- mtk_thermal_turn_on_buffer(mt, apmixed_base);
-@@ -1305,38 +1299,18 @@ static int mtk_thermal_probe(struct plat
-
- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
- &mtk_thermal_ops);
-- if (IS_ERR(tzdev)) {
-- ret = PTR_ERR(tzdev);
-- goto err_disable_clk_peri_therm;
-- }
-+ if (IS_ERR(tzdev))
-+ return PTR_ERR(tzdev);
-
- ret = devm_thermal_add_hwmon_sysfs(&pdev->dev, tzdev);
- if (ret)
- dev_warn(&pdev->dev, "error in thermal_add_hwmon_sysfs");
-
- return 0;
--
--err_disable_clk_peri_therm:
-- clk_disable_unprepare(mt->clk_peri_therm);
--err_disable_clk_auxadc:
-- clk_disable_unprepare(mt->clk_auxadc);
--
-- return ret;
--}
--
--static int mtk_thermal_remove(struct platform_device *pdev)
--{
-- struct mtk_thermal *mt = platform_get_drvdata(pdev);
--
-- clk_disable_unprepare(mt->clk_peri_therm);
-- clk_disable_unprepare(mt->clk_auxadc);
--
-- return 0;
- }
-
- static struct platform_driver mtk_thermal_driver = {
- .probe = mtk_thermal_probe,
-- .remove = mtk_thermal_remove,
- .driver = {
- .name = "mtk-thermal",
- .of_match_table = mtk_thermal_of_match,
+++ /dev/null
-From 655fe2533ac05323a07c19ba079bf2064e7741af Mon Sep 17 00:00:00 2001
-From: Rob Herring <robh@kernel.org>
-Date: Sun, 19 Mar 2023 11:32:31 -0500
-Subject: [PATCH 20/42] thermal/drivers/mediatek: Use of_address_to_resource()
-
-Replace of_get_address() and of_translate_address() calls with single
-call to of_address_to_resource().
-
-Signed-off-by: Rob Herring <robh@kernel.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230319163231.226738-1-robh@kernel.org
----
- drivers/thermal/mediatek/auxadc_thermal.c | 8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -979,14 +979,12 @@ static void mtk_thermal_init_bank(struct
-
- static u64 of_get_phys_base(struct device_node *np)
- {
-- u64 size64;
-- const __be32 *regaddr_p;
-+ struct resource res;
-
-- regaddr_p = of_get_address(np, 0, &size64, NULL);
-- if (!regaddr_p)
-+ if (of_address_to_resource(np, 0, &res))
- return OF_BAD_ADDR;
-
-- return of_translate_address(np, regaddr_p);
-+ return res.start;
- }
-
- static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
+++ /dev/null
-From 2c380d07215e6fce3ac66cc5af059bc2c2a69f7a Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ricardo=20Ca=C3=B1uelo?= <ricardo.canuelo@collabora.com>
-Date: Thu, 25 May 2023 14:18:11 +0200
-Subject: [PATCH 21/42] Revert "thermal/drivers/mediatek: Use devm_of_iomap to
- avoid resource leak in mtk_thermal_probe"
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This reverts commit f05c7b7d9ea9477fcc388476c6f4ade8c66d2d26.
-
-That change was causing a regression in the generic-adc-thermal-probed
-bootrr test as reported in the kernelci-results list [1].
-A proper rework will take longer, so revert it for now.
-
-[1] https://groups.io/g/kernelci-results/message/42660
-
-Fixes: f05c7b7d9ea9 ("thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe")
-Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
-Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230525121811.3360268-1-ricardo.canuelo@collabora.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 14 ++------------
- 1 file changed, 2 insertions(+), 12 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1222,12 +1222,7 @@ static int mtk_thermal_probe(struct plat
- return -ENODEV;
- }
-
-- auxadc_base = devm_of_iomap(&pdev->dev, auxadc, 0, NULL);
-- if (IS_ERR(auxadc_base)) {
-- of_node_put(auxadc);
-- return PTR_ERR(auxadc_base);
-- }
--
-+ auxadc_base = of_iomap(auxadc, 0);
- auxadc_phys_base = of_get_phys_base(auxadc);
-
- of_node_put(auxadc);
-@@ -1243,12 +1238,7 @@ static int mtk_thermal_probe(struct plat
- return -ENODEV;
- }
-
-- apmixed_base = devm_of_iomap(&pdev->dev, apmixedsys, 0, NULL);
-- if (IS_ERR(apmixed_base)) {
-- of_node_put(apmixedsys);
-- return PTR_ERR(apmixed_base);
-- }
--
-+ apmixed_base = of_iomap(apmixedsys, 0);
- apmixed_phys_base = of_get_phys_base(apmixedsys);
-
- of_node_put(apmixedsys);
+++ /dev/null
-From 496f4b08981d8a788ad5a2073fa1c65a2af1862b Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wenst@chromium.org>
-Date: Tue, 13 Jun 2023 17:13:16 +0800
-Subject: [PATCH 22/42] thermal/drivers/mediatek/lvts_thermal: Register thermal
- zones as hwmon sensors
-
-Register thermal zones as hwmon sensors to let userspace read
-temperatures using standard hwmon interface.
-
-Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230613091317.1691247-1-wenst@chromium.org
----
- drivers/thermal/mediatek/lvts_thermal.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -19,6 +19,8 @@
- #include <linux/thermal.h>
- #include <dt-bindings/thermal/mediatek,lvts-thermal.h>
-
-+#include "../thermal_hwmon.h"
-+
- #define LVTS_MONCTL0(__base) (__base + 0x0000)
- #define LVTS_MONCTL1(__base) (__base + 0x0004)
- #define LVTS_MONCTL2(__base) (__base + 0x0008)
-@@ -996,6 +998,9 @@ static int lvts_ctrl_start(struct device
- return PTR_ERR(tz);
- }
-
-+ if (devm_thermal_add_hwmon_sysfs(dev, tz))
-+ dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id);
-+
- /*
- * The thermal zone pointer will be needed in the
- * interrupt handler, we store it in the sensor
+++ /dev/null
-From 885b9768ce2a66ed5d250822aed53d5114c895da Mon Sep 17 00:00:00 2001
-From: Yangtao Li <frank.li@vivo.com>
-Date: Tue, 20 Jun 2023 17:07:31 +0800
-Subject: [PATCH 23/42] thermal/drivers/mediatek/lvts_thermal: Remove redundant
- msg in lvts_ctrl_start()
-
-The upper-layer devm_thermal_add_hwmon_sysfs() function can directly
-print error information.
-
-Signed-off-by: Yangtao Li <frank.li@vivo.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230620090732.50025-10-frank.li@vivo.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -998,8 +998,7 @@ static int lvts_ctrl_start(struct device
- return PTR_ERR(tz);
- }
-
-- if (devm_thermal_add_hwmon_sysfs(dev, tz))
-- dev_warn(dev, "zone %d: Failed to add hwmon sysfs attributes\n", dt_id);
-+ devm_thermal_add_hwmon_sysfs(dev, tz);
-
- /*
- * The thermal zone pointer will be needed in the
+++ /dev/null
-From 27b389d9f62c2174f95fe4002b11e77d4cb3ce80 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:32 -0400
-Subject: [PATCH 25/42] thermal/drivers/mediatek/lvts_thermal: Handle IRQ on
- all controllers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There is a single IRQ handler for each LVTS thermal domain, and it is
-supposed to check each of its underlying controllers for the origin of
-the interrupt and clear its status. However due to a typo, only the
-first controller was ever being handled, which resulted in the interrupt
-never being cleared when it happened on the other controllers. Add the
-missing index so interrupts are handled for all controllers.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-2-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -451,7 +451,7 @@ static irqreturn_t lvts_irq_handler(int
-
- for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
-
-- aux = lvts_ctrl_irq_handler(lvts_td->lvts_ctrl);
-+ aux = lvts_ctrl_irq_handler(&lvts_td->lvts_ctrl[i]);
- if (aux != IRQ_HANDLED)
- continue;
-
+++ /dev/null
-From 6d827142643ee10c13ff9a1d90f38fb399aa9fff Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:33 -0400
-Subject: [PATCH 26/42] thermal/drivers/mediatek/lvts_thermal: Honor sensors in
- immediate mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Each controller can be configured to operate on immediate or filtered
-mode. On filtered mode, the sensors are enabled by setting the
-corresponding bits in MONCTL0, while on immediate mode, by setting
-MSRCTL1.
-
-Previously, the code would set MSRCTL1 for all four sensors when
-configured to immediate mode, but given that the controller might not
-have all four sensors connected, this would cause interrupts to trigger
-for non-existent sensors. Fix this by handling the MSRCTL1 register
-analogously to the MONCTL0: only enable the sensors that were declared.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-3-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 57 ++++++++++++++-----------
- 1 file changed, 33 insertions(+), 24 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -897,24 +897,6 @@ static int lvts_ctrl_configure(struct de
- writel(value, LVTS_MSRCTL0(lvts_ctrl->base));
-
- /*
-- * LVTS_MSRCTL1 : Measurement control
-- *
-- * Bits:
-- *
-- * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
-- * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
-- * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
-- * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
-- *
-- * That configuration will ignore the filtering and the delays
-- * introduced below in MONCTL1 and MONCTL2
-- */
-- if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
-- value = BIT(9) | BIT(6) | BIT(5) | BIT(4);
-- writel(value, LVTS_MSRCTL1(lvts_ctrl->base));
-- }
--
-- /*
- * LVTS_MONCTL1 : Period unit and group interval configuration
- *
- * The clock source of LVTS thermal controller is 26MHz.
-@@ -979,6 +961,15 @@ static int lvts_ctrl_start(struct device
- struct thermal_zone_device *tz;
- u32 sensor_map = 0;
- int i;
-+ /*
-+ * Bitmaps to enable each sensor on immediate and filtered modes, as
-+ * described in MSRCTL1 and MONCTL0 registers below, respectively.
-+ */
-+ u32 sensor_imm_bitmap[] = { BIT(4), BIT(5), BIT(6), BIT(9) };
-+ u32 sensor_filt_bitmap[] = { BIT(0), BIT(1), BIT(2), BIT(3) };
-+
-+ u32 *sensor_bitmap = lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE ?
-+ sensor_imm_bitmap : sensor_filt_bitmap;
-
- for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++) {
-
-@@ -1016,20 +1007,38 @@ static int lvts_ctrl_start(struct device
- * map, so we can enable the temperature monitoring in
- * the hardware thermal controller.
- */
-- sensor_map |= BIT(i);
-+ sensor_map |= sensor_bitmap[i];
- }
-
- /*
-- * Bits:
-- * 9: Single point access flow
-- * 0-3: Enable sensing point 0-3
-- *
- * The initialization of the thermal zones give us
- * which sensor point to enable. If any thermal zone
- * was not described in the device tree, it won't be
- * enabled here in the sensor map.
- */
-- writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
-+ if (lvts_ctrl->mode == LVTS_MSR_IMMEDIATE_MODE) {
-+ /*
-+ * LVTS_MSRCTL1 : Measurement control
-+ *
-+ * Bits:
-+ *
-+ * 9: Ignore MSRCTL0 config and do immediate measurement on sensor3
-+ * 6: Ignore MSRCTL0 config and do immediate measurement on sensor2
-+ * 5: Ignore MSRCTL0 config and do immediate measurement on sensor1
-+ * 4: Ignore MSRCTL0 config and do immediate measurement on sensor0
-+ *
-+ * That configuration will ignore the filtering and the delays
-+ * introduced in MONCTL1 and MONCTL2
-+ */
-+ writel(sensor_map, LVTS_MSRCTL1(lvts_ctrl->base));
-+ } else {
-+ /*
-+ * Bits:
-+ * 9: Single point access flow
-+ * 0-3: Enable sensing point 0-3
-+ */
-+ writel(sensor_map | BIT(9), LVTS_MONCTL0(lvts_ctrl->base));
-+ }
-
- return 0;
- }
+++ /dev/null
-From 93bb11dd19bdcc1fc97c7ceababd0db9fde128ad Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:34 -0400
-Subject: [PATCH 27/42] thermal/drivers/mediatek/lvts_thermal: Use offset
- threshold for IRQ
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are two kinds of temperature monitoring interrupts available:
-* High Offset, Low Offset
-* Hot, Hot to normal, Cold
-
-The code currently uses the hot/h2n/cold interrupts, however in a way
-that doesn't work: the cold threshold is left uninitialized, which
-prevents the other thresholds from ever triggering, and the h2n
-interrupt is used as the lower threshold, which prevents the hot
-interrupt from triggering again after the thresholds are updated by the
-thermal framework, since a hot interrupt can only trigger again after
-the hot to normal interrupt has been triggered.
-
-But better yet than addressing those issues, is to use the high/low
-offset interrupts instead. This way only two thresholds need to be
-managed, which have a simpler state machine, making them a better match
-to the thermal framework's high and low thresholds.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-4-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -298,9 +298,9 @@ static int lvts_set_trips(struct thermal
- u32 raw_high = lvts_temp_to_raw(high);
-
- /*
-- * Hot to normal temperature threshold
-+ * Low offset temperature threshold
- *
-- * LVTS_H2NTHRE
-+ * LVTS_OFFSETL
- *
- * Bits:
- *
-@@ -309,13 +309,13 @@ static int lvts_set_trips(struct thermal
- if (low != -INT_MAX) {
- pr_debug("%s: Setting low limit temperature interrupt: %d\n",
- thermal_zone_device_type(tz), low);
-- writel(raw_low, LVTS_H2NTHRE(base));
-+ writel(raw_low, LVTS_OFFSETL(base));
- }
-
- /*
-- * Hot temperature threshold
-+ * High offset temperature threshold
- *
-- * LVTS_HTHRE
-+ * LVTS_OFFSETH
- *
- * Bits:
- *
-@@ -323,7 +323,7 @@ static int lvts_set_trips(struct thermal
- */
- pr_debug("%s: Setting high limit temperature interrupt: %d\n",
- thermal_zone_device_type(tz), high);
-- writel(raw_high, LVTS_HTHRE(base));
-+ writel(raw_high, LVTS_OFFSETH(base));
-
- return 0;
- }
+++ /dev/null
-From 8f8cab9d3e90acf1db278ef44ad05f10aefb973f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:35 -0400
-Subject: [PATCH 28/42] thermal/drivers/mediatek/lvts_thermal: Disable
- undesired interrupts
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Out of the many interrupts supported by the hardware, the only ones of
-interest to the driver currently are:
-* The temperature went over the high offset threshold, for any of the
- sensors
-* The temperature went below the low offset threshold, for any of the
- sensors
-* The temperature went over the stage3 threshold
-
-These are the only thresholds configured by the driver through the
-OFFSETH, OFFSETL, and PROTTC registers, respectively.
-
-The current interrupt mask in LVTS_MONINT_CONF, enables many more
-interrupts, including data ready on sensors for both filtered and
-immediate mode. These are not only not handled by the driver, but they
-are also triggered too often, causing unneeded overhead. Disable these
-unnecessary interrupts.
-
-The meaning of each bit can be seen in the comment describing
-LVTS_MONINTST in the IRQ handler.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-5-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -65,7 +65,7 @@
- #define LVTS_HW_FILTER 0x2
- #define LVTS_TSSEL_CONF 0x13121110
- #define LVTS_CALSCALE_CONF 0x300
--#define LVTS_MONINT_CONF 0x9FBF7BDE
-+#define LVTS_MONINT_CONF 0x8300318C
-
- #define LVTS_INT_SENSOR0 0x0009001F
- #define LVTS_INT_SENSOR1 0x001203E0
+++ /dev/null
-From bd1ccf9408e6155564530af5e09b53ae497fe332 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:36 -0400
-Subject: [PATCH 29/42] thermal/drivers/mediatek/lvts_thermal: Don't leave
- threshold zeroed
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The thermal framework might leave the low threshold unset if there
-aren't any lower trip points. This leaves the register zeroed, which
-translates to a very high temperature for the low threshold. The
-interrupt for this threshold is then immediately triggered, and the
-state machine gets stuck, preventing any other temperature monitoring
-interrupts to ever trigger.
-
-(The same happens by not setting the Cold or Hot to Normal thresholds
-when using those)
-
-Set the unused threshold to a valid low value. This value was chosen so
-that for any valid golden temperature read from the efuse, when the
-value is converted to raw and back again to milliCelsius, the result
-doesn't underflow.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-6-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -83,6 +83,8 @@
-
- #define LVTS_HW_SHUTDOWN_MT8195 105000
-
-+#define LVTS_MINIMUM_THRESHOLD 20000
-+
- static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
- static int coeff_b = LVTS_COEFF_B;
-
-@@ -294,7 +296,7 @@ static int lvts_set_trips(struct thermal
- {
- struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
- void __iomem *base = lvts_sensor->base;
-- u32 raw_low = lvts_temp_to_raw(low);
-+ u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
- u32 raw_high = lvts_temp_to_raw(high);
-
- /*
-@@ -306,11 +308,9 @@ static int lvts_set_trips(struct thermal
- *
- * 14-0 : Raw temperature for threshold
- */
-- if (low != -INT_MAX) {
-- pr_debug("%s: Setting low limit temperature interrupt: %d\n",
-- thermal_zone_device_type(tz), low);
-- writel(raw_low, LVTS_OFFSETL(base));
-- }
-+ pr_debug("%s: Setting low limit temperature interrupt: %d\n",
-+ thermal_zone_device_type(tz), low);
-+ writel(raw_low, LVTS_OFFSETL(base));
-
- /*
- * High offset temperature threshold
+++ /dev/null
-From d4dd09968cab3249e6148e1c3fccb51824edb411 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 6 Jul 2023 11:37:37 -0400
-Subject: [PATCH 30/42] thermal/drivers/mediatek/lvts_thermal: Manage threshold
- between sensors
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Each LVTS thermal controller can have up to four sensors, each capable
-of triggering its own interrupt when its measured temperature crosses
-the configured threshold. The threshold for each sensor is handled
-separately by the thermal framework, since each one is registered with
-its own thermal zone and trips. However, the temperature thresholds are
-configured on the controller, and therefore are shared between all
-sensors on that controller.
-
-When the temperature measured by the sensors is different enough to
-cause the thermal framework to configure different thresholds for each
-one, interrupts start triggering on sensors outside the last threshold
-configured.
-
-To address the issue, track the thresholds required by each sensor and
-only actually set the highest one in the hardware, and disable
-interrupts for all sensors outside the current configured range.
-
-Fixes: f5f633b18234 ("thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver")
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230706153823.201943-7-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 69 +++++++++++++++++++++++++
- 1 file changed, 69 insertions(+)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -67,6 +67,11 @@
- #define LVTS_CALSCALE_CONF 0x300
- #define LVTS_MONINT_CONF 0x8300318C
-
-+#define LVTS_MONINT_OFFSET_SENSOR0 0xC
-+#define LVTS_MONINT_OFFSET_SENSOR1 0x180
-+#define LVTS_MONINT_OFFSET_SENSOR2 0x3000
-+#define LVTS_MONINT_OFFSET_SENSOR3 0x3000000
-+
- #define LVTS_INT_SENSOR0 0x0009001F
- #define LVTS_INT_SENSOR1 0x001203E0
- #define LVTS_INT_SENSOR2 0x00247C00
-@@ -112,6 +117,8 @@ struct lvts_sensor {
- void __iomem *base;
- int id;
- int dt_id;
-+ int low_thresh;
-+ int high_thresh;
- };
-
- struct lvts_ctrl {
-@@ -121,6 +128,8 @@ struct lvts_ctrl {
- int num_lvts_sensor;
- int mode;
- void __iomem *base;
-+ int low_thresh;
-+ int high_thresh;
- };
-
- struct lvts_domain {
-@@ -292,12 +301,66 @@ static int lvts_get_temp(struct thermal_
- return 0;
- }
-
-+static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
-+{
-+ u32 masks[] = {
-+ LVTS_MONINT_OFFSET_SENSOR0,
-+ LVTS_MONINT_OFFSET_SENSOR1,
-+ LVTS_MONINT_OFFSET_SENSOR2,
-+ LVTS_MONINT_OFFSET_SENSOR3,
-+ };
-+ u32 value = 0;
-+ int i;
-+
-+ value = readl(LVTS_MONINT(lvts_ctrl->base));
-+
-+ for (i = 0; i < ARRAY_SIZE(masks); i++) {
-+ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
-+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
-+ value |= masks[i];
-+ else
-+ value &= ~masks[i];
-+ }
-+
-+ writel(value, LVTS_MONINT(lvts_ctrl->base));
-+}
-+
-+static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
-+{
-+ int i;
-+
-+ if (high > lvts_ctrl->high_thresh)
-+ return true;
-+
-+ for (i = 0; i < lvts_ctrl->num_lvts_sensor; i++)
-+ if (lvts_ctrl->sensors[i].high_thresh == lvts_ctrl->high_thresh
-+ && lvts_ctrl->sensors[i].low_thresh == lvts_ctrl->low_thresh)
-+ return false;
-+
-+ return true;
-+}
-+
- static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
- {
- struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-+ struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
- void __iomem *base = lvts_sensor->base;
- u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
- u32 raw_high = lvts_temp_to_raw(high);
-+ bool should_update_thresh;
-+
-+ lvts_sensor->low_thresh = low;
-+ lvts_sensor->high_thresh = high;
-+
-+ should_update_thresh = lvts_should_update_thresh(lvts_ctrl, high);
-+ if (should_update_thresh) {
-+ lvts_ctrl->high_thresh = high;
-+ lvts_ctrl->low_thresh = low;
-+ }
-+ lvts_update_irq_mask(lvts_ctrl);
-+
-+ if (!should_update_thresh)
-+ return 0;
-
- /*
- * Low offset temperature threshold
-@@ -521,6 +584,9 @@ static int lvts_sensor_init(struct devic
- */
- lvts_sensor[i].msr = lvts_ctrl_data->mode == LVTS_MSR_IMMEDIATE_MODE ?
- imm_regs[i] : msr_regs[i];
-+
-+ lvts_sensor[i].low_thresh = INT_MIN;
-+ lvts_sensor[i].high_thresh = INT_MIN;
- };
-
- lvts_ctrl->num_lvts_sensor = lvts_ctrl_data->num_lvts_sensor;
-@@ -688,6 +754,9 @@ static int lvts_ctrl_init(struct device
- */
- lvts_ctrl[i].hw_tshut_raw_temp =
- lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
-+
-+ lvts_ctrl[i].low_thresh = INT_MIN;
-+ lvts_ctrl[i].high_thresh = INT_MIN;
- }
-
- /*
+++ /dev/null
-From 5af4904adc8b840987000724977c13c706d3b7d8 Mon Sep 17 00:00:00 2001
-From: Minjie Du <duminjie@vivo.com>
-Date: Thu, 13 Jul 2023 12:24:12 +0800
-Subject: [PATCH 31/42] thermal/drivers/mediatek/lvts: Fix parameter check in
- lvts_debugfs_init()
-
-The documentation says "If an error occurs, ERR_PTR(-ERROR) will be
-returned" but the current code checks against a NULL pointer returned.
-
-Fix this by checking if IS_ERR().
-
-Signed-off-by: Minjie Du <duminjie@vivo.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230713042413.2519-1-duminjie@vivo.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -201,7 +201,7 @@ static int lvts_debugfs_init(struct devi
- int i;
-
- lvts_td->dom_dentry = debugfs_create_dir(dev_name(dev), NULL);
-- if (!lvts_td->dom_dentry)
-+ if (IS_ERR(lvts_td->dom_dentry))
- return 0;
-
- for (i = 0; i < lvts_td->num_lvts_ctrl; i++) {
+++ /dev/null
-From 6186be80317d1dbda34d35c06c084a083938f2d3 Mon Sep 17 00:00:00 2001
-From: Chen Jiahao <chenjiahao16@huawei.com>
-Date: Wed, 2 Aug 2023 17:45:27 +0800
-Subject: [PATCH 32/42] thermal/drivers/mediatek: Clean up redundant
- dev_err_probe()
-
-Referring to platform_get_irq()'s definition, the return value has
-already been checked if ret < 0, and printed via dev_err_probe().
-Calling dev_err_probe() one more time outside platform_get_irq()
-is obviously redundant.
-
-Removing dev_err_probe() outside platform_get_irq() to clean up
-above problem.
-
-Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230802094527.988842-1-chenjiahao16@huawei.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -1216,7 +1216,7 @@ static int lvts_probe(struct platform_de
-
- irq = platform_get_irq(pdev, 0);
- if (irq < 0)
-- return dev_err_probe(dev, irq, "No irq resource\n");
-+ return irq;
-
- ret = lvts_domain_init(dev, lvts_td, lvts_data);
- if (ret)
+++ /dev/null
-From c2ab54ab0425388e65901a7af2fbf69ead968708 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?N=C3=ADcolas=20F=2E=20R=2E=20A=2E=20Prado?=
- <nfraprado@collabora.com>
-Date: Thu, 13 Jul 2023 11:42:37 -0400
-Subject: [PATCH 33/42] thermal/drivers/mediatek/lvts_thermal: Make readings
- valid in filtered mode
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Currently, when a controller is configured to use filtered mode, thermal
-readings are valid only about 30% of the time.
-
-Upon testing, it was noticed that lowering any of the interval settings
-resulted in an improved rate of valid data. The same was observed when
-decreasing the number of samples for each sensor (which also results in
-quicker measurements).
-
-Retrying the read with a timeout longer than the time it takes to
-resample (about 344us with these settings and 4 sensors) also improves
-the rate.
-
-Lower all timing settings to the minimum, configure the filtering to
-single sample, and poll the measurement register for at least one period
-to improve the data validity on filtered mode. With these changes in
-place, out of 100000 reads, a single one failed, ie 99.999% of the data
-was valid.
-
-Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
-Tested-by: Chen-Yu Tsai <wenst@chromium.org>
-Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230713154743.611870-1-nfraprado@collabora.com
----
- drivers/thermal/mediatek/lvts_thermal.c | 19 ++++++++++++-------
- 1 file changed, 12 insertions(+), 7 deletions(-)
-
---- a/drivers/thermal/mediatek/lvts_thermal.c
-+++ b/drivers/thermal/mediatek/lvts_thermal.c
-@@ -58,11 +58,11 @@
- #define LVTS_PROTTC(__base) (__base + 0x00CC)
- #define LVTS_CLKEN(__base) (__base + 0x00E4)
-
--#define LVTS_PERIOD_UNIT ((118 * 1000) / (256 * 38))
--#define LVTS_GROUP_INTERVAL 1
--#define LVTS_FILTER_INTERVAL 1
--#define LVTS_SENSOR_INTERVAL 1
--#define LVTS_HW_FILTER 0x2
-+#define LVTS_PERIOD_UNIT 0
-+#define LVTS_GROUP_INTERVAL 0
-+#define LVTS_FILTER_INTERVAL 0
-+#define LVTS_SENSOR_INTERVAL 0
-+#define LVTS_HW_FILTER 0x0
- #define LVTS_TSSEL_CONF 0x13121110
- #define LVTS_CALSCALE_CONF 0x300
- #define LVTS_MONINT_CONF 0x8300318C
-@@ -86,6 +86,9 @@
- #define LVTS_MSR_IMMEDIATE_MODE 0
- #define LVTS_MSR_FILTERED_MODE 1
-
-+#define LVTS_MSR_READ_TIMEOUT_US 400
-+#define LVTS_MSR_READ_WAIT_US (LVTS_MSR_READ_TIMEOUT_US / 2)
-+
- #define LVTS_HW_SHUTDOWN_MT8195 105000
-
- #define LVTS_MINIMUM_THRESHOLD 20000
-@@ -268,6 +271,7 @@ static int lvts_get_temp(struct thermal_
- struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
- void __iomem *msr = lvts_sensor->msr;
- u32 value;
-+ int rc;
-
- /*
- * Measurement registers:
-@@ -280,7 +284,8 @@ static int lvts_get_temp(struct thermal_
- * 16 : Valid temperature
- * 15-0 : Raw temperature
- */
-- value = readl(msr);
-+ rc = readl_poll_timeout(msr, value, value & BIT(16),
-+ LVTS_MSR_READ_WAIT_US, LVTS_MSR_READ_TIMEOUT_US);
-
- /*
- * As the thermal zone temperature will read before the
-@@ -293,7 +298,7 @@ static int lvts_get_temp(struct thermal_
- * functionning temperature and directly jump to a system
- * shutdown.
- */
-- if (!(value & BIT(16)))
-+ if (rc)
- return -EAGAIN;
-
- *temp = lvts_raw_to_temp(value & 0xFFFF);
+++ /dev/null
-From c864ff9de3b225b43bb8e08dedb223632323e059 Mon Sep 17 00:00:00 2001
-From: Andrei Coardos <aboutphysycs@gmail.com>
-Date: Fri, 11 Aug 2023 22:28:47 +0300
-Subject: [PATCH 34/42] thermal/drivers/mediatek/auxadc_thermal: Removed call
- to platform_set_drvdata()
-
-This function call was found to be unnecessary as there is no equivalent
-platform_get_drvdata() call to access the private data of the driver. Also,
-the private data is defined in this driver, so there is no risk of it being
-accessed outside of this driver file.
-
-Signed-off-by: Andrei Coardos <aboutphysycs@gmail.com>
-Reviewed-by: Alexandru Ardelean <alex@shruggie.ro>
-Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
-Link: https://lore.kernel.org/r/20230811192847.3838-1-aboutphysycs@gmail.com
----
- drivers/thermal/mediatek/auxadc_thermal.c | 2 --
- 1 file changed, 2 deletions(-)
-
---- a/drivers/thermal/mediatek/auxadc_thermal.c
-+++ b/drivers/thermal/mediatek/auxadc_thermal.c
-@@ -1283,8 +1283,6 @@ static int mtk_thermal_probe(struct plat
- mtk_thermal_init_bank(mt, i, apmixed_phys_base,
- auxadc_phys_base, ctrl_id);
-
-- platform_set_drvdata(pdev, mt);
--
- tzdev = devm_thermal_of_zone_register(&pdev->dev, 0, mt,
- &mtk_thermal_ops);
- if (IS_ERR(tzdev))
+++ /dev/null
-From 11f9a0f4e51887ad7b4a2898a368fcd0c2984e89 Mon Sep 17 00:00:00 2001
-From: Frank Wunderlich <frank-w@public-files.de>
-Date: Sun, 9 Oct 2022 12:16:31 +0200
-Subject: [PATCH 12/16] i2c: mediatek: add mt7986 support
-
-Add i2c support for MT7986 SoC.
-
-Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -431,6 +431,19 @@ static const struct mtk_i2c_compatible m
- .max_dma_support = 33,
- };
-
-+static const struct mtk_i2c_compatible mt7986_compat = {
-+ .quirks = &mt7622_i2c_quirks,
-+ .regs = mt_i2c_regs_v1,
-+ .pmic_i2c = 0,
-+ .dcm = 1,
-+ .auto_restart = 1,
-+ .aux_len_reg = 1,
-+ .timing_adjust = 0,
-+ .dma_sync = 1,
-+ .ltiming_adjust = 0,
-+ .max_dma_support = 32,
-+};
-+
- static const struct mtk_i2c_compatible mt8173_compat = {
- .regs = mt_i2c_regs_v1,
- .pmic_i2c = 0,
-@@ -503,6 +516,7 @@ static const struct of_device_id mtk_i2c
- { .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
- { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
- { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
-+ { .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat },
- { .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat },
- { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
- { .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
+++ /dev/null
-From 98204ccafd45a8a6109ff2d60e2c179b95d92578 Mon Sep 17 00:00:00 2001
-From: ye xingchen <ye.xingchen@zte.com.cn>
-Date: Thu, 19 Jan 2023 17:19:58 +0800
-Subject: [PATCH 13/16] i2c: mt65xx: Use
- devm_platform_get_and_ioremap_resource()
-
-Convert platform_get_resource(), devm_ioremap_resource() to a single
-call to devm_platform_get_and_ioremap_resource(), as this is exactly
-what this function does.
-
-Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -1366,20 +1366,17 @@ static int mtk_i2c_probe(struct platform
- {
- int ret = 0;
- struct mtk_i2c *i2c;
-- struct resource *res;
- int i, irq, speed_clk;
-
- i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
- if (!i2c)
- return -ENOMEM;
-
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- i2c->base = devm_ioremap_resource(&pdev->dev, res);
-+ i2c->base = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
- if (IS_ERR(i2c->base))
- return PTR_ERR(i2c->base);
-
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-- i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res);
-+ i2c->pdmabase = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
- if (IS_ERR(i2c->pdmabase))
- return PTR_ERR(i2c->pdmabase);
-
+++ /dev/null
-From 8106fa2e0ae6082833fe1df97829c46c0183eaea Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Sat, 11 Mar 2023 12:16:54 +0100
-Subject: [PATCH 14/16] i2c: mt65xx: drop of_match_ptr for ID table
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The driver can match only via the DT table so the table should be always
-used and the of_match_ptr does not have any sense (this also allows ACPI
-matching via PRP0001, even though it might not be relevant here).
-
- drivers/i2c/busses/i2c-mt65xx.c:514:34: error: ‘mtk_i2c_of_match’ defined but not used [-Werror=unused-const-variable=]
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Reviewed-by: Guenter Roeck <groeck@chromium.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -1546,7 +1546,7 @@ static struct platform_driver mtk_i2c_dr
- .driver = {
- .name = I2C_DRV_NAME,
- .pm = &mtk_i2c_pm,
-- .of_match_table = of_match_ptr(mtk_i2c_of_match),
-+ .of_match_table = mtk_i2c_of_match,
- },
- };
-
+++ /dev/null
-From f69f3d662ba3bf999c36d9ac1e684540c4487bc3 Mon Sep 17 00:00:00 2001
-From: Daniel Golle <daniel@makrotopia.org>
-Date: Mon, 10 Apr 2023 17:19:38 +0100
-Subject: [PATCH 15/16] i2c: mediatek: add support for MT7981 SoC
-
-Add support for the I2C units found in the MediaTek MT7981 and MT7988
-SoCs. Just like other recent MediaTek I2C units that also uses v3
-register offsets (which differ from v2 only by OFFSET_SLAVE_ADDR being
-0x94 instead of 0x4).
-
-Signed-off-by: Daniel Golle <daniel@makrotopia.org>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/i2c-mt65xx.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/i2c/busses/i2c-mt65xx.c
-+++ b/drivers/i2c/busses/i2c-mt65xx.c
-@@ -431,6 +431,18 @@ static const struct mtk_i2c_compatible m
- .max_dma_support = 33,
- };
-
-+static const struct mtk_i2c_compatible mt7981_compat = {
-+ .regs = mt_i2c_regs_v3,
-+ .pmic_i2c = 0,
-+ .dcm = 0,
-+ .auto_restart = 1,
-+ .aux_len_reg = 1,
-+ .timing_adjust = 1,
-+ .dma_sync = 1,
-+ .ltiming_adjust = 1,
-+ .max_dma_support = 33
-+};
-+
- static const struct mtk_i2c_compatible mt7986_compat = {
- .quirks = &mt7622_i2c_quirks,
- .regs = mt_i2c_regs_v1,
-@@ -516,6 +528,7 @@ static const struct of_device_id mtk_i2c
- { .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
- { .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
- { .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
-+ { .compatible = "mediatek,mt7981-i2c", .data = &mt7981_compat },
- { .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat },
- { .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat },
- { .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
+++ /dev/null
-From d35469096915f2551ed1d26da1ab12ff500fc963 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:33 +0800
-Subject: [PATCH 1/9] ASoC: mediatek: mt7986: add common header
-
-Add header files for register definition and structure.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-2-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt7986/mt7986-afe-common.h | 49 +++++
- sound/soc/mediatek/mt7986/mt7986-reg.h | 196 ++++++++++++++++++
- 2 files changed, 245 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-common.h
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-reg.h
-
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-afe-common.h
-@@ -0,0 +1,49 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * mt7986-afe-common.h -- MediaTek 7986 audio driver definitions
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ * Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#ifndef _MT_7986_AFE_COMMON_H_
-+#define _MT_7986_AFE_COMMON_H_
-+
-+#include <sound/soc.h>
-+#include <linux/clk.h>
-+#include <linux/list.h>
-+#include <linux/regmap.h>
-+#include "../common/mtk-base-afe.h"
-+
-+enum {
-+ MT7986_MEMIF_DL1,
-+ MT7986_MEMIF_VUL12,
-+ MT7986_MEMIF_NUM,
-+ MT7986_DAI_ETDM = MT7986_MEMIF_NUM,
-+ MT7986_DAI_NUM,
-+};
-+
-+enum {
-+ MT7986_IRQ_0,
-+ MT7986_IRQ_1,
-+ MT7986_IRQ_2,
-+ MT7986_IRQ_NUM,
-+};
-+
-+struct mt7986_afe_private {
-+ struct clk_bulk_data *clks;
-+ int num_clks;
-+
-+ int pm_runtime_bypass_reg_ctl;
-+
-+ /* dai */
-+ void *dai_priv[MT7986_DAI_NUM];
-+};
-+
-+unsigned int mt7986_afe_rate_transform(struct device *dev,
-+ unsigned int rate);
-+
-+/* dai register */
-+int mt7986_dai_etdm_register(struct mtk_base_afe *afe);
-+#endif
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-reg.h
-@@ -0,0 +1,196 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/*
-+ * mt7986-reg.h -- MediaTek 7986 audio driver reg definition
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ * Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#ifndef _MT7986_REG_H_
-+#define _MT7986_REG_H_
-+
-+#define AUDIO_TOP_CON2 0x0008
-+#define AUDIO_TOP_CON4 0x0010
-+#define AUDIO_ENGEN_CON0 0x0014
-+#define AFE_IRQ_MCU_EN 0x0100
-+#define AFE_IRQ_MCU_STATUS 0x0120
-+#define AFE_IRQ_MCU_CLR 0x0128
-+#define AFE_IRQ0_MCU_CFG0 0x0140
-+#define AFE_IRQ0_MCU_CFG1 0x0144
-+#define AFE_IRQ1_MCU_CFG0 0x0148
-+#define AFE_IRQ1_MCU_CFG1 0x014c
-+#define AFE_IRQ2_MCU_CFG0 0x0150
-+#define AFE_IRQ2_MCU_CFG1 0x0154
-+#define ETDM_IN5_CON0 0x13f0
-+#define ETDM_IN5_CON1 0x13f4
-+#define ETDM_IN5_CON2 0x13f8
-+#define ETDM_IN5_CON3 0x13fc
-+#define ETDM_IN5_CON4 0x1400
-+#define ETDM_OUT5_CON0 0x1570
-+#define ETDM_OUT5_CON4 0x1580
-+#define ETDM_OUT5_CON5 0x1584
-+#define ETDM_4_7_COWORK_CON0 0x15e0
-+#define ETDM_4_7_COWORK_CON1 0x15e4
-+#define AFE_CONN018_1 0x1b44
-+#define AFE_CONN018_4 0x1b50
-+#define AFE_CONN019_1 0x1b64
-+#define AFE_CONN019_4 0x1b70
-+#define AFE_CONN124_1 0x2884
-+#define AFE_CONN124_4 0x2890
-+#define AFE_CONN125_1 0x28a4
-+#define AFE_CONN125_4 0x28b0
-+#define AFE_CONN_RS_0 0x3920
-+#define AFE_CONN_RS_3 0x392c
-+#define AFE_CONN_16BIT_0 0x3960
-+#define AFE_CONN_16BIT_3 0x396c
-+#define AFE_CONN_24BIT_0 0x3980
-+#define AFE_CONN_24BIT_3 0x398c
-+#define AFE_MEMIF_CON0 0x3d98
-+#define AFE_MEMIF_RD_MON 0x3da0
-+#define AFE_MEMIF_WR_MON 0x3da4
-+#define AFE_DL0_BASE_MSB 0x3e40
-+#define AFE_DL0_BASE 0x3e44
-+#define AFE_DL0_CUR_MSB 0x3e48
-+#define AFE_DL0_CUR 0x3e4c
-+#define AFE_DL0_END_MSB 0x3e50
-+#define AFE_DL0_END 0x3e54
-+#define AFE_DL0_RCH_MON 0x3e58
-+#define AFE_DL0_LCH_MON 0x3e5c
-+#define AFE_DL0_CON0 0x3e60
-+#define AFE_VUL0_BASE_MSB 0x4220
-+#define AFE_VUL0_BASE 0x4224
-+#define AFE_VUL0_CUR_MSB 0x4228
-+#define AFE_VUL0_CUR 0x422c
-+#define AFE_VUL0_END_MSB 0x4230
-+#define AFE_VUL0_END 0x4234
-+#define AFE_VUL0_CON0 0x4238
-+
-+#define AFE_MAX_REGISTER AFE_VUL0_CON0
-+#define AFE_IRQ_STATUS_BITS 0x7
-+#define AFE_IRQ_CNT_SHIFT 0
-+#define AFE_IRQ_CNT_MASK 0xffffff
-+
-+/* AUDIO_TOP_CON2 */
-+#define CLK_OUT5_PDN BIT(14)
-+#define CLK_OUT5_PDN_MASK BIT(14)
-+#define CLK_IN5_PDN BIT(7)
-+#define CLK_IN5_PDN_MASK BIT(7)
-+
-+/* AUDIO_TOP_CON4 */
-+#define PDN_APLL_TUNER2 BIT(12)
-+#define PDN_APLL_TUNER2_MASK BIT(12)
-+
-+/* AUDIO_ENGEN_CON0 */
-+#define AUD_APLL2_EN BIT(3)
-+#define AUD_APLL2_EN_MASK BIT(3)
-+#define AUD_26M_EN BIT(0)
-+#define AUD_26M_EN_MASK BIT(0)
-+
-+/* AFE_DL0_CON0 */
-+#define DL0_ON_SFT 28
-+#define DL0_ON_MASK 0x1
-+#define DL0_ON_MASK_SFT BIT(28)
-+#define DL0_MINLEN_SFT 20
-+#define DL0_MINLEN_MASK 0xf
-+#define DL0_MINLEN_MASK_SFT (0xf << 20)
-+#define DL0_MODE_SFT 8
-+#define DL0_MODE_MASK 0x1f
-+#define DL0_MODE_MASK_SFT (0x1f << 8)
-+#define DL0_PBUF_SIZE_SFT 5
-+#define DL0_PBUF_SIZE_MASK 0x3
-+#define DL0_PBUF_SIZE_MASK_SFT (0x3 << 5)
-+#define DL0_MONO_SFT 4
-+#define DL0_MONO_MASK 0x1
-+#define DL0_MONO_MASK_SFT BIT(4)
-+#define DL0_HALIGN_SFT 2
-+#define DL0_HALIGN_MASK 0x1
-+#define DL0_HALIGN_MASK_SFT BIT(2)
-+#define DL0_HD_MODE_SFT 0
-+#define DL0_HD_MODE_MASK 0x3
-+#define DL0_HD_MODE_MASK_SFT (0x3 << 0)
-+
-+/* AFE_VUL0_CON0 */
-+#define VUL0_ON_SFT 28
-+#define VUL0_ON_MASK 0x1
-+#define VUL0_ON_MASK_SFT BIT(28)
-+#define VUL0_MODE_SFT 8
-+#define VUL0_MODE_MASK 0x1f
-+#define VUL0_MODE_MASK_SFT (0x1f << 8)
-+#define VUL0_MONO_SFT 4
-+#define VUL0_MONO_MASK 0x1
-+#define VUL0_MONO_MASK_SFT BIT(4)
-+#define VUL0_HALIGN_SFT 2
-+#define VUL0_HALIGN_MASK 0x1
-+#define VUL0_HALIGN_MASK_SFT BIT(2)
-+#define VUL0_HD_MODE_SFT 0
-+#define VUL0_HD_MODE_MASK 0x3
-+#define VUL0_HD_MODE_MASK_SFT (0x3 << 0)
-+
-+/* AFE_IRQ_MCU_CON */
-+#define IRQ_MCU_MODE_SFT 4
-+#define IRQ_MCU_MODE_MASK 0x1f
-+#define IRQ_MCU_MODE_MASK_SFT (0x1f << 4)
-+#define IRQ_MCU_ON_SFT 0
-+#define IRQ_MCU_ON_MASK 0x1
-+#define IRQ_MCU_ON_MASK_SFT BIT(0)
-+#define IRQ0_MCU_CLR_SFT 0
-+#define IRQ0_MCU_CLR_MASK 0x1
-+#define IRQ0_MCU_CLR_MASK_SFT BIT(0)
-+#define IRQ1_MCU_CLR_SFT 1
-+#define IRQ1_MCU_CLR_MASK 0x1
-+#define IRQ1_MCU_CLR_MASK_SFT BIT(1)
-+#define IRQ2_MCU_CLR_SFT 2
-+#define IRQ2_MCU_CLR_MASK 0x1
-+#define IRQ2_MCU_CLR_MASK_SFT BIT(2)
-+
-+/* ETDM_IN5_CON2 */
-+#define IN_CLK_SRC(x) ((x) << 10)
-+#define IN_CLK_SRC_SFT 10
-+#define IN_CLK_SRC_MASK GENMASK(12, 10)
-+
-+/* ETDM_IN5_CON3 */
-+#define IN_SEL_FS(x) ((x) << 26)
-+#define IN_SEL_FS_SFT 26
-+#define IN_SEL_FS_MASK GENMASK(30, 26)
-+
-+/* ETDM_IN5_CON4 */
-+#define IN_RELATCH(x) ((x) << 20)
-+#define IN_RELATCH_SFT 20
-+#define IN_RELATCH_MASK GENMASK(24, 20)
-+#define IN_CLK_INV BIT(18)
-+#define IN_CLK_INV_MASK BIT(18)
-+
-+/* ETDM_IN5_CON0 & ETDM_OUT5_CON0 */
-+#define RELATCH_SRC_MASK GENMASK(30, 28)
-+#define ETDM_CH_NUM_MASK GENMASK(27, 23)
-+#define ETDM_WRD_LEN_MASK GENMASK(20, 16)
-+#define ETDM_BIT_LEN_MASK GENMASK(15, 11)
-+#define ETDM_FMT_MASK GENMASK(8, 6)
-+#define ETDM_SYNC BIT(1)
-+#define ETDM_SYNC_MASK BIT(1)
-+#define ETDM_EN BIT(0)
-+#define ETDM_EN_MASK BIT(0)
-+
-+/* ETDM_OUT5_CON4 */
-+#define OUT_RELATCH(x) ((x) << 24)
-+#define OUT_RELATCH_SFT 24
-+#define OUT_RELATCH_MASK GENMASK(28, 24)
-+#define OUT_CLK_SRC(x) ((x) << 6)
-+#define OUT_CLK_SRC_SFT 6
-+#define OUT_CLK_SRC_MASK GENMASK(8, 6)
-+#define OUT_SEL_FS(x) (x)
-+#define OUT_SEL_FS_SFT 0
-+#define OUT_SEL_FS_MASK GENMASK(4, 0)
-+
-+/* ETDM_OUT5_CON5 */
-+#define ETDM_CLK_DIV BIT(12)
-+#define ETDM_CLK_DIV_MASK BIT(12)
-+#define OUT_CLK_INV BIT(9)
-+#define OUT_CLK_INV_MASK BIT(9)
-+
-+/* ETDM_4_7_COWORK_CON0 */
-+#define OUT_SEL(x) ((x) << 12)
-+#define OUT_SEL_SFT 12
-+#define OUT_SEL_MASK GENMASK(15, 12)
-+#endif
+++ /dev/null
-From 948a288897015fb3ee63b3f720b396b590c17fd7 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:34 +0800
-Subject: [PATCH 2/9] ASoC: mediatek: mt7986: support etdm in platform driver
-
-Add mt7986 etdm dai driver support.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-3-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/mt7986/mt7986-dai-etdm.c | 411 ++++++++++++++++++++
- 1 file changed, 411 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-dai-etdm.c
-
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-dai-etdm.c
-@@ -0,0 +1,411 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MediaTek ALSA SoC Audio DAI eTDM Control
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ * Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#include <linux/bitfield.h>
-+#include <linux/bitops.h>
-+#include <linux/regmap.h>
-+#include <sound/pcm_params.h>
-+#include "mt7986-afe-common.h"
-+#include "mt7986-reg.h"
-+
-+#define HOPPING_CLK 0
-+#define APLL_CLK 1
-+#define MTK_DAI_ETDM_FORMAT_I2S 0
-+#define MTK_DAI_ETDM_FORMAT_DSPA 4
-+#define MTK_DAI_ETDM_FORMAT_DSPB 5
-+
-+enum {
-+ MTK_ETDM_RATE_8K = 0,
-+ MTK_ETDM_RATE_12K = 1,
-+ MTK_ETDM_RATE_16K = 2,
-+ MTK_ETDM_RATE_24K = 3,
-+ MTK_ETDM_RATE_32K = 4,
-+ MTK_ETDM_RATE_48K = 5,
-+ MTK_ETDM_RATE_96K = 7,
-+ MTK_ETDM_RATE_192K = 9,
-+ MTK_ETDM_RATE_11K = 16,
-+ MTK_ETDM_RATE_22K = 17,
-+ MTK_ETDM_RATE_44K = 18,
-+ MTK_ETDM_RATE_88K = 19,
-+ MTK_ETDM_RATE_176K = 20,
-+};
-+
-+struct mtk_dai_etdm_priv {
-+ bool bck_inv;
-+ bool lrck_inv;
-+ bool slave_mode;
-+ unsigned int format;
-+};
-+
-+static unsigned int mt7986_etdm_rate_transform(struct device *dev, unsigned int rate)
-+{
-+ switch (rate) {
-+ case 8000:
-+ return MTK_ETDM_RATE_8K;
-+ case 11025:
-+ return MTK_ETDM_RATE_11K;
-+ case 12000:
-+ return MTK_ETDM_RATE_12K;
-+ case 16000:
-+ return MTK_ETDM_RATE_16K;
-+ case 22050:
-+ return MTK_ETDM_RATE_22K;
-+ case 24000:
-+ return MTK_ETDM_RATE_24K;
-+ case 32000:
-+ return MTK_ETDM_RATE_32K;
-+ case 44100:
-+ return MTK_ETDM_RATE_44K;
-+ case 48000:
-+ return MTK_ETDM_RATE_48K;
-+ case 88200:
-+ return MTK_ETDM_RATE_88K;
-+ case 96000:
-+ return MTK_ETDM_RATE_96K;
-+ case 176400:
-+ return MTK_ETDM_RATE_176K;
-+ case 192000:
-+ return MTK_ETDM_RATE_192K;
-+ default:
-+ dev_warn(dev, "%s(), rate %u invalid, using %d!!!\n",
-+ __func__, rate, MTK_ETDM_RATE_48K);
-+ return MTK_ETDM_RATE_48K;
-+ }
-+}
-+
-+static int get_etdm_wlen(unsigned int bitwidth)
-+{
-+ return bitwidth <= 16 ? 16 : 32;
-+}
-+
-+/* dai component */
-+/* interconnection */
-+
-+static const struct snd_kcontrol_new o124_mix[] = {
-+ SOC_DAPM_SINGLE_AUTODISABLE("I032_Switch", AFE_CONN124_1, 0, 1, 0),
-+};
-+
-+static const struct snd_kcontrol_new o125_mix[] = {
-+ SOC_DAPM_SINGLE_AUTODISABLE("I033_Switch", AFE_CONN125_1, 1, 1, 0),
-+};
-+
-+static const struct snd_soc_dapm_widget mtk_dai_etdm_widgets[] = {
-+
-+ /* DL */
-+ SND_SOC_DAPM_MIXER("I150", SND_SOC_NOPM, 0, 0, NULL, 0),
-+ SND_SOC_DAPM_MIXER("I151", SND_SOC_NOPM, 0, 0, NULL, 0),
-+ /* UL */
-+ SND_SOC_DAPM_MIXER("O124", SND_SOC_NOPM, 0, 0, o124_mix, ARRAY_SIZE(o124_mix)),
-+ SND_SOC_DAPM_MIXER("O125", SND_SOC_NOPM, 0, 0, o125_mix, ARRAY_SIZE(o125_mix)),
-+};
-+
-+static const struct snd_soc_dapm_route mtk_dai_etdm_routes[] = {
-+ {"I150", NULL, "ETDM Capture"},
-+ {"I151", NULL, "ETDM Capture"},
-+ {"ETDM Playback", NULL, "O124"},
-+ {"ETDM Playback", NULL, "O125"},
-+ {"O124", "I032_Switch", "I032"},
-+ {"O125", "I033_Switch", "I033"},
-+};
-+
-+/* dai ops */
-+static int mtk_dai_etdm_startup(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+ struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+ int ret;
-+
-+ ret = clk_bulk_prepare_enable(afe_priv->num_clks, afe_priv->clks);
-+ if (ret)
-+ return dev_err_probe(afe->dev, ret, "Failed to enable clocks\n");
-+
-+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_OUT5_PDN_MASK, 0);
-+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_IN5_PDN_MASK, 0);
-+
-+ return 0;
-+}
-+
-+static void mtk_dai_etdm_shutdown(struct snd_pcm_substream *substream,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+ struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+
-+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_OUT5_PDN_MASK,
-+ CLK_OUT5_PDN);
-+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON2, CLK_IN5_PDN_MASK,
-+ CLK_IN5_PDN);
-+
-+ clk_bulk_disable_unprepare(afe_priv->num_clks, afe_priv->clks);
-+}
-+
-+static unsigned int get_etdm_ch_fixup(unsigned int channels)
-+{
-+ if (channels > 16)
-+ return 24;
-+ else if (channels > 8)
-+ return 16;
-+ else if (channels > 4)
-+ return 8;
-+ else if (channels > 2)
-+ return 4;
-+ else
-+ return 2;
-+}
-+
-+static int mtk_dai_etdm_config(struct mtk_base_afe *afe,
-+ struct snd_pcm_hw_params *params,
-+ struct snd_soc_dai *dai,
-+ int stream)
-+{
-+ struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+ struct mtk_dai_etdm_priv *etdm_data = afe_priv->dai_priv[dai->id];
-+ unsigned int rate = params_rate(params);
-+ unsigned int etdm_rate = mt7986_etdm_rate_transform(afe->dev, rate);
-+ unsigned int afe_rate = mt7986_afe_rate_transform(afe->dev, rate);
-+ unsigned int channels = params_channels(params);
-+ unsigned int bit_width = params_width(params);
-+ unsigned int wlen = get_etdm_wlen(bit_width);
-+ unsigned int val = 0;
-+ unsigned int mask = 0;
-+
-+ dev_dbg(afe->dev, "%s(), stream %d, rate %u, bitwidth %u\n",
-+ __func__, stream, rate, bit_width);
-+
-+ /* CON0 */
-+ mask |= ETDM_BIT_LEN_MASK;
-+ val |= FIELD_PREP(ETDM_BIT_LEN_MASK, bit_width - 1);
-+ mask |= ETDM_WRD_LEN_MASK;
-+ val |= FIELD_PREP(ETDM_WRD_LEN_MASK, wlen - 1);
-+ mask |= ETDM_FMT_MASK;
-+ val |= FIELD_PREP(ETDM_FMT_MASK, etdm_data->format);
-+ mask |= ETDM_CH_NUM_MASK;
-+ val |= FIELD_PREP(ETDM_CH_NUM_MASK, get_etdm_ch_fixup(channels) - 1);
-+ mask |= RELATCH_SRC_MASK;
-+ val |= FIELD_PREP(RELATCH_SRC_MASK, APLL_CLK);
-+
-+ switch (stream) {
-+ case SNDRV_PCM_STREAM_PLAYBACK:
-+ /* set ETDM_OUT5_CON0 */
-+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, mask, val);
-+
-+ /* set ETDM_OUT5_CON4 */
-+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON4,
-+ OUT_RELATCH_MASK, OUT_RELATCH(afe_rate));
-+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON4,
-+ OUT_CLK_SRC_MASK, OUT_CLK_SRC(APLL_CLK));
-+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON4,
-+ OUT_SEL_FS_MASK, OUT_SEL_FS(etdm_rate));
-+
-+ /* set ETDM_OUT5_CON5 */
-+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON5,
-+ ETDM_CLK_DIV_MASK, ETDM_CLK_DIV);
-+ break;
-+ case SNDRV_PCM_STREAM_CAPTURE:
-+ /* set ETDM_IN5_CON0 */
-+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0, mask, val);
-+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0,
-+ ETDM_SYNC_MASK, ETDM_SYNC);
-+
-+ /* set ETDM_IN5_CON2 */
-+ regmap_update_bits(afe->regmap, ETDM_IN5_CON2,
-+ IN_CLK_SRC_MASK, IN_CLK_SRC(APLL_CLK));
-+
-+ /* set ETDM_IN5_CON3 */
-+ regmap_update_bits(afe->regmap, ETDM_IN5_CON3,
-+ IN_SEL_FS_MASK, IN_SEL_FS(etdm_rate));
-+
-+ /* set ETDM_IN5_CON4 */
-+ regmap_update_bits(afe->regmap, ETDM_IN5_CON4,
-+ IN_RELATCH_MASK, IN_RELATCH(afe_rate));
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_dai_etdm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+
-+ mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_PLAYBACK);
-+ mtk_dai_etdm_config(afe, params, dai, SNDRV_PCM_STREAM_CAPTURE);
-+
-+ return 0;
-+}
-+
-+static int mtk_dai_etdm_trigger(struct snd_pcm_substream *substream, int cmd,
-+ struct snd_soc_dai *dai)
-+{
-+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+
-+ dev_dbg(afe->dev, "%s(), cmd %d, dai id %d\n", __func__, cmd, dai->id);
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0, ETDM_EN_MASK,
-+ ETDM_EN);
-+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, ETDM_EN_MASK,
-+ ETDM_EN);
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ regmap_update_bits(afe->regmap, ETDM_IN5_CON0, ETDM_EN_MASK,
-+ 0);
-+ regmap_update_bits(afe->regmap, ETDM_OUT5_CON0, ETDM_EN_MASK,
-+ 0);
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ return 0;
-+}
-+
-+static int mtk_dai_etdm_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
-+{
-+ struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
-+ struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+ struct mtk_dai_etdm_priv *etdm_data;
-+ void *priv_data;
-+
-+ switch (dai->id) {
-+ case MT7986_DAI_ETDM:
-+ break;
-+ default:
-+ dev_warn(afe->dev, "%s(), id %d not support\n",
-+ __func__, dai->id);
-+ return -EINVAL;
-+ }
-+
-+ priv_data = devm_kzalloc(afe->dev, sizeof(struct mtk_dai_etdm_priv),
-+ GFP_KERNEL);
-+ if (!priv_data)
-+ return -ENOMEM;
-+
-+ afe_priv->dai_priv[dai->id] = priv_data;
-+ etdm_data = afe_priv->dai_priv[dai->id];
-+
-+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
-+ case SND_SOC_DAIFMT_I2S:
-+ etdm_data->format = MTK_DAI_ETDM_FORMAT_I2S;
-+ break;
-+ case SND_SOC_DAIFMT_DSP_A:
-+ etdm_data->format = MTK_DAI_ETDM_FORMAT_DSPA;
-+ break;
-+ case SND_SOC_DAIFMT_DSP_B:
-+ etdm_data->format = MTK_DAI_ETDM_FORMAT_DSPB;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
-+ case SND_SOC_DAIFMT_NB_NF:
-+ etdm_data->bck_inv = false;
-+ etdm_data->lrck_inv = false;
-+ break;
-+ case SND_SOC_DAIFMT_NB_IF:
-+ etdm_data->bck_inv = false;
-+ etdm_data->lrck_inv = true;
-+ break;
-+ case SND_SOC_DAIFMT_IB_NF:
-+ etdm_data->bck_inv = true;
-+ etdm_data->lrck_inv = false;
-+ break;
-+ case SND_SOC_DAIFMT_IB_IF:
-+ etdm_data->bck_inv = true;
-+ etdm_data->lrck_inv = true;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
-+ case SND_SOC_DAIFMT_CBM_CFM:
-+ etdm_data->slave_mode = true;
-+ break;
-+ case SND_SOC_DAIFMT_CBS_CFS:
-+ etdm_data->slave_mode = false;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct snd_soc_dai_ops mtk_dai_etdm_ops = {
-+ .startup = mtk_dai_etdm_startup,
-+ .shutdown = mtk_dai_etdm_shutdown,
-+ .hw_params = mtk_dai_etdm_hw_params,
-+ .trigger = mtk_dai_etdm_trigger,
-+ .set_fmt = mtk_dai_etdm_set_fmt,
-+};
-+
-+/* dai driver */
-+#define MTK_ETDM_RATES (SNDRV_PCM_RATE_8000_48000 |\
-+ SNDRV_PCM_RATE_88200 |\
-+ SNDRV_PCM_RATE_96000 |\
-+ SNDRV_PCM_RATE_176400 |\
-+ SNDRV_PCM_RATE_192000)
-+
-+#define MTK_ETDM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
-+ SNDRV_PCM_FMTBIT_S24_LE |\
-+ SNDRV_PCM_FMTBIT_S32_LE)
-+
-+static struct snd_soc_dai_driver mtk_dai_etdm_driver[] = {
-+ {
-+ .name = "ETDM",
-+ .id = MT7986_DAI_ETDM,
-+ .capture = {
-+ .stream_name = "ETDM Capture",
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .rates = MTK_ETDM_RATES,
-+ .formats = MTK_ETDM_FORMATS,
-+ },
-+ .playback = {
-+ .stream_name = "ETDM Playback",
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .rates = MTK_ETDM_RATES,
-+ .formats = MTK_ETDM_FORMATS,
-+ },
-+ .ops = &mtk_dai_etdm_ops,
-+ .symmetric_rate = 1,
-+ .symmetric_sample_bits = 1,
-+ },
-+};
-+
-+int mt7986_dai_etdm_register(struct mtk_base_afe *afe)
-+{
-+ struct mtk_base_afe_dai *dai;
-+
-+ dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL);
-+ if (!dai)
-+ return -ENOMEM;
-+
-+ list_add(&dai->list, &afe->sub_dais);
-+
-+ dai->dai_drivers = mtk_dai_etdm_driver;
-+ dai->num_dai_drivers = ARRAY_SIZE(mtk_dai_etdm_driver);
-+
-+ dai->dapm_widgets = mtk_dai_etdm_widgets;
-+ dai->num_dapm_widgets = ARRAY_SIZE(mtk_dai_etdm_widgets);
-+ dai->dapm_routes = mtk_dai_etdm_routes;
-+ dai->num_dapm_routes = ARRAY_SIZE(mtk_dai_etdm_routes);
-+
-+ return 0;
-+}
+++ /dev/null
-From fc7776dee86bc07d22820a904760a95f49a2f12e Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:35 +0800
-Subject: [PATCH 3/9] ASoC: mediatek: mt7986: add platform driver
-
-Add mt7986 platform driver.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-4-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/Kconfig | 10 +
- sound/soc/mediatek/Makefile | 1 +
- sound/soc/mediatek/mt7986/Makefile | 8 +
- sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 622 +++++++++++++++++++++
- 4 files changed, 641 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/Makefile
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-afe-pcm.c
-
---- a/sound/soc/mediatek/Kconfig
-+++ b/sound/soc/mediatek/Kconfig
-@@ -54,6 +54,16 @@ config SND_SOC_MT6797_MT6351
- Select Y if you have such device.
- If unsure select "N".
-
-+config SND_SOC_MT7986
-+ tristate "ASoC support for Mediatek MT7986 chip"
-+ depends on ARCH_MEDIATEK
-+ select SND_SOC_MEDIATEK
-+ help
-+ This adds ASoC platform driver support for MediaTek MT7986 chip
-+ that can be used with other codecs.
-+ Select Y if you have such device.
-+ If unsure select "N".
-+
- config SND_SOC_MT8173
- tristate "ASoC support for Mediatek MT8173 chip"
- depends on ARCH_MEDIATEK
---- a/sound/soc/mediatek/Makefile
-+++ b/sound/soc/mediatek/Makefile
-@@ -2,6 +2,7 @@
- obj-$(CONFIG_SND_SOC_MEDIATEK) += common/
- obj-$(CONFIG_SND_SOC_MT2701) += mt2701/
- obj-$(CONFIG_SND_SOC_MT6797) += mt6797/
-+obj-$(CONFIG_SND_SOC_MT7986) += mt7986/
- obj-$(CONFIG_SND_SOC_MT8173) += mt8173/
- obj-$(CONFIG_SND_SOC_MT8183) += mt8183/
- obj-$(CONFIG_SND_SOC_MT8186) += mt8186/
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/Makefile
-@@ -0,0 +1,8 @@
-+# SPDX-License-Identifier: GPL-2.0
-+
-+# platform driver
-+snd-soc-mt7986-afe-objs := \
-+ mt7986-afe-pcm.o \
-+ mt7986-dai-etdm.o
-+
-+obj-$(CONFIG_SND_SOC_MT7986) += snd-soc-mt7986-afe.o
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-afe-pcm.c
-@@ -0,0 +1,622 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * MediaTek ALSA SoC AFE platform driver for MT7986
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ * Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/pm_runtime.h>
-+
-+#include "mt7986-afe-common.h"
-+#include "mt7986-reg.h"
-+#include "../common/mtk-afe-platform-driver.h"
-+#include "../common/mtk-afe-fe-dai.h"
-+
-+enum {
-+ MTK_AFE_RATE_8K = 0,
-+ MTK_AFE_RATE_11K = 1,
-+ MTK_AFE_RATE_12K = 2,
-+ MTK_AFE_RATE_16K = 4,
-+ MTK_AFE_RATE_22K = 5,
-+ MTK_AFE_RATE_24K = 6,
-+ MTK_AFE_RATE_32K = 8,
-+ MTK_AFE_RATE_44K = 9,
-+ MTK_AFE_RATE_48K = 10,
-+ MTK_AFE_RATE_88K = 13,
-+ MTK_AFE_RATE_96K = 14,
-+ MTK_AFE_RATE_176K = 17,
-+ MTK_AFE_RATE_192K = 18,
-+};
-+
-+enum {
-+ CLK_INFRA_AUD_BUS_CK = 0,
-+ CLK_INFRA_AUD_26M_CK,
-+ CLK_INFRA_AUD_L_CK,
-+ CLK_INFRA_AUD_AUD_CK,
-+ CLK_INFRA_AUD_EG2_CK,
-+ CLK_NUM
-+};
-+
-+static const char *aud_clks[CLK_NUM] = {
-+ [CLK_INFRA_AUD_BUS_CK] = "aud_bus_ck",
-+ [CLK_INFRA_AUD_26M_CK] = "aud_26m_ck",
-+ [CLK_INFRA_AUD_L_CK] = "aud_l_ck",
-+ [CLK_INFRA_AUD_AUD_CK] = "aud_aud_ck",
-+ [CLK_INFRA_AUD_EG2_CK] = "aud_eg2_ck",
-+};
-+
-+unsigned int mt7986_afe_rate_transform(struct device *dev, unsigned int rate)
-+{
-+ switch (rate) {
-+ case 8000:
-+ return MTK_AFE_RATE_8K;
-+ case 11025:
-+ return MTK_AFE_RATE_11K;
-+ case 12000:
-+ return MTK_AFE_RATE_12K;
-+ case 16000:
-+ return MTK_AFE_RATE_16K;
-+ case 22050:
-+ return MTK_AFE_RATE_22K;
-+ case 24000:
-+ return MTK_AFE_RATE_24K;
-+ case 32000:
-+ return MTK_AFE_RATE_32K;
-+ case 44100:
-+ return MTK_AFE_RATE_44K;
-+ case 48000:
-+ return MTK_AFE_RATE_48K;
-+ case 88200:
-+ return MTK_AFE_RATE_88K;
-+ case 96000:
-+ return MTK_AFE_RATE_96K;
-+ case 176400:
-+ return MTK_AFE_RATE_176K;
-+ case 192000:
-+ return MTK_AFE_RATE_192K;
-+ default:
-+ dev_warn(dev, "%s(), rate %u invalid, using %d!!!\n",
-+ __func__, rate, MTK_AFE_RATE_48K);
-+ return MTK_AFE_RATE_48K;
-+ }
-+}
-+
-+static const struct snd_pcm_hardware mt7986_afe_hardware = {
-+ .info = SNDRV_PCM_INFO_MMAP |
-+ SNDRV_PCM_INFO_INTERLEAVED |
-+ SNDRV_PCM_INFO_MMAP_VALID,
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE |
-+ SNDRV_PCM_FMTBIT_S24_LE |
-+ SNDRV_PCM_FMTBIT_S32_LE,
-+ .period_bytes_min = 256,
-+ .period_bytes_max = 4 * 48 * 1024,
-+ .periods_min = 2,
-+ .periods_max = 256,
-+ .buffer_bytes_max = 8 * 48 * 1024,
-+ .fifo_size = 0,
-+};
-+
-+static int mt7986_memif_fs(struct snd_pcm_substream *substream,
-+ unsigned int rate)
-+{
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
-+ struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-+
-+ return mt7986_afe_rate_transform(afe->dev, rate);
-+}
-+
-+static int mt7986_irq_fs(struct snd_pcm_substream *substream,
-+ unsigned int rate)
-+{
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, AFE_PCM_NAME);
-+ struct mtk_base_afe *afe = snd_soc_component_get_drvdata(component);
-+
-+ return mt7986_afe_rate_transform(afe->dev, rate);
-+}
-+
-+#define MTK_PCM_RATES (SNDRV_PCM_RATE_8000_48000 |\
-+ SNDRV_PCM_RATE_88200 |\
-+ SNDRV_PCM_RATE_96000 |\
-+ SNDRV_PCM_RATE_176400 |\
-+ SNDRV_PCM_RATE_192000)
-+
-+#define MTK_PCM_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
-+ SNDRV_PCM_FMTBIT_S24_LE |\
-+ SNDRV_PCM_FMTBIT_S32_LE)
-+
-+static struct snd_soc_dai_driver mt7986_memif_dai_driver[] = {
-+ /* FE DAIs: memory intefaces to CPU */
-+ {
-+ .name = "DL1",
-+ .id = MT7986_MEMIF_DL1,
-+ .playback = {
-+ .stream_name = "DL1",
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .rates = MTK_PCM_RATES,
-+ .formats = MTK_PCM_FORMATS,
-+ },
-+ .ops = &mtk_afe_fe_ops,
-+ },
-+ {
-+ .name = "UL1",
-+ .id = MT7986_MEMIF_VUL12,
-+ .capture = {
-+ .stream_name = "UL1",
-+ .channels_min = 1,
-+ .channels_max = 2,
-+ .rates = MTK_PCM_RATES,
-+ .formats = MTK_PCM_FORMATS,
-+ },
-+ .ops = &mtk_afe_fe_ops,
-+ },
-+};
-+
-+static const struct snd_kcontrol_new o018_mix[] = {
-+ SOC_DAPM_SINGLE_AUTODISABLE("I150_Switch", AFE_CONN018_4, 22, 1, 0),
-+};
-+
-+static const struct snd_kcontrol_new o019_mix[] = {
-+ SOC_DAPM_SINGLE_AUTODISABLE("I151_Switch", AFE_CONN019_4, 23, 1, 0),
-+};
-+
-+static const struct snd_soc_dapm_widget mt7986_memif_widgets[] = {
-+ /* DL */
-+ SND_SOC_DAPM_MIXER("I032", SND_SOC_NOPM, 0, 0, NULL, 0),
-+ SND_SOC_DAPM_MIXER("I033", SND_SOC_NOPM, 0, 0, NULL, 0),
-+
-+ /* UL */
-+ SND_SOC_DAPM_MIXER("O018", SND_SOC_NOPM, 0, 0,
-+ o018_mix, ARRAY_SIZE(o018_mix)),
-+ SND_SOC_DAPM_MIXER("O019", SND_SOC_NOPM, 0, 0,
-+ o019_mix, ARRAY_SIZE(o019_mix)),
-+};
-+
-+static const struct snd_soc_dapm_route mt7986_memif_routes[] = {
-+ {"I032", NULL, "DL1"},
-+ {"I033", NULL, "DL1"},
-+ {"UL1", NULL, "O018"},
-+ {"UL1", NULL, "O019"},
-+ {"O018", "I150_Switch", "I150"},
-+ {"O019", "I151_Switch", "I151"},
-+};
-+
-+static const struct snd_soc_component_driver mt7986_afe_pcm_dai_component = {
-+ .name = "mt7986-afe-pcm-dai",
-+};
-+
-+static const struct mtk_base_memif_data memif_data[MT7986_MEMIF_NUM] = {
-+ [MT7986_MEMIF_DL1] = {
-+ .name = "DL1",
-+ .id = MT7986_MEMIF_DL1,
-+ .reg_ofs_base = AFE_DL0_BASE,
-+ .reg_ofs_cur = AFE_DL0_CUR,
-+ .reg_ofs_end = AFE_DL0_END,
-+ .reg_ofs_base_msb = AFE_DL0_BASE_MSB,
-+ .reg_ofs_cur_msb = AFE_DL0_CUR_MSB,
-+ .reg_ofs_end_msb = AFE_DL0_END_MSB,
-+ .fs_reg = AFE_DL0_CON0,
-+ .fs_shift = DL0_MODE_SFT,
-+ .fs_maskbit = DL0_MODE_MASK,
-+ .mono_reg = AFE_DL0_CON0,
-+ .mono_shift = DL0_MONO_SFT,
-+ .enable_reg = AFE_DL0_CON0,
-+ .enable_shift = DL0_ON_SFT,
-+ .hd_reg = AFE_DL0_CON0,
-+ .hd_shift = DL0_HD_MODE_SFT,
-+ .hd_align_reg = AFE_DL0_CON0,
-+ .hd_align_mshift = DL0_HALIGN_SFT,
-+ .pbuf_reg = AFE_DL0_CON0,
-+ .pbuf_shift = DL0_PBUF_SIZE_SFT,
-+ .minlen_reg = AFE_DL0_CON0,
-+ .minlen_shift = DL0_MINLEN_SFT,
-+ },
-+ [MT7986_MEMIF_VUL12] = {
-+ .name = "VUL12",
-+ .id = MT7986_MEMIF_VUL12,
-+ .reg_ofs_base = AFE_VUL0_BASE,
-+ .reg_ofs_cur = AFE_VUL0_CUR,
-+ .reg_ofs_end = AFE_VUL0_END,
-+ .reg_ofs_base_msb = AFE_VUL0_BASE_MSB,
-+ .reg_ofs_cur_msb = AFE_VUL0_CUR_MSB,
-+ .reg_ofs_end_msb = AFE_VUL0_END_MSB,
-+ .fs_reg = AFE_VUL0_CON0,
-+ .fs_shift = VUL0_MODE_SFT,
-+ .fs_maskbit = VUL0_MODE_MASK,
-+ .mono_reg = AFE_VUL0_CON0,
-+ .mono_shift = VUL0_MONO_SFT,
-+ .enable_reg = AFE_VUL0_CON0,
-+ .enable_shift = VUL0_ON_SFT,
-+ .hd_reg = AFE_VUL0_CON0,
-+ .hd_shift = VUL0_HD_MODE_SFT,
-+ .hd_align_reg = AFE_VUL0_CON0,
-+ .hd_align_mshift = VUL0_HALIGN_SFT,
-+ },
-+};
-+
-+static const struct mtk_base_irq_data irq_data[MT7986_IRQ_NUM] = {
-+ [MT7986_IRQ_0] = {
-+ .id = MT7986_IRQ_0,
-+ .irq_cnt_reg = AFE_IRQ0_MCU_CFG1,
-+ .irq_cnt_shift = AFE_IRQ_CNT_SHIFT,
-+ .irq_cnt_maskbit = AFE_IRQ_CNT_MASK,
-+ .irq_fs_reg = AFE_IRQ0_MCU_CFG0,
-+ .irq_fs_shift = IRQ_MCU_MODE_SFT,
-+ .irq_fs_maskbit = IRQ_MCU_MODE_MASK,
-+ .irq_en_reg = AFE_IRQ0_MCU_CFG0,
-+ .irq_en_shift = IRQ_MCU_ON_SFT,
-+ .irq_clr_reg = AFE_IRQ_MCU_CLR,
-+ .irq_clr_shift = IRQ0_MCU_CLR_SFT,
-+ },
-+ [MT7986_IRQ_1] = {
-+ .id = MT7986_IRQ_1,
-+ .irq_cnt_reg = AFE_IRQ1_MCU_CFG1,
-+ .irq_cnt_shift = AFE_IRQ_CNT_SHIFT,
-+ .irq_cnt_maskbit = AFE_IRQ_CNT_MASK,
-+ .irq_fs_reg = AFE_IRQ1_MCU_CFG0,
-+ .irq_fs_shift = IRQ_MCU_MODE_SFT,
-+ .irq_fs_maskbit = IRQ_MCU_MODE_MASK,
-+ .irq_en_reg = AFE_IRQ1_MCU_CFG0,
-+ .irq_en_shift = IRQ_MCU_ON_SFT,
-+ .irq_clr_reg = AFE_IRQ_MCU_CLR,
-+ .irq_clr_shift = IRQ1_MCU_CLR_SFT,
-+ },
-+ [MT7986_IRQ_2] = {
-+ .id = MT7986_IRQ_2,
-+ .irq_cnt_reg = AFE_IRQ2_MCU_CFG1,
-+ .irq_cnt_shift = AFE_IRQ_CNT_SHIFT,
-+ .irq_cnt_maskbit = AFE_IRQ_CNT_MASK,
-+ .irq_fs_reg = AFE_IRQ2_MCU_CFG0,
-+ .irq_fs_shift = IRQ_MCU_MODE_SFT,
-+ .irq_fs_maskbit = IRQ_MCU_MODE_MASK,
-+ .irq_en_reg = AFE_IRQ2_MCU_CFG0,
-+ .irq_en_shift = IRQ_MCU_ON_SFT,
-+ .irq_clr_reg = AFE_IRQ_MCU_CLR,
-+ .irq_clr_shift = IRQ2_MCU_CLR_SFT,
-+ },
-+};
-+
-+static bool mt7986_is_volatile_reg(struct device *dev, unsigned int reg)
-+{
-+ /*
-+ * Those auto-gen regs are read-only, so put it as volatile because
-+ * volatile registers cannot be cached, which means that they cannot
-+ * be set when power is off
-+ */
-+
-+ switch (reg) {
-+ case AFE_DL0_CUR_MSB:
-+ case AFE_DL0_CUR:
-+ case AFE_DL0_RCH_MON:
-+ case AFE_DL0_LCH_MON:
-+ case AFE_VUL0_CUR_MSB:
-+ case AFE_VUL0_CUR:
-+ case AFE_IRQ_MCU_STATUS:
-+ case AFE_MEMIF_RD_MON:
-+ case AFE_MEMIF_WR_MON:
-+ return true;
-+ default:
-+ return false;
-+ };
-+}
-+
-+static const struct regmap_config mt7986_afe_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+ .volatile_reg = mt7986_is_volatile_reg,
-+ .max_register = AFE_MAX_REGISTER,
-+ .num_reg_defaults_raw = ((AFE_MAX_REGISTER / 4) + 1),
-+};
-+
-+static int mt7986_init_clock(struct mtk_base_afe *afe)
-+{
-+ struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+ int ret, i;
-+
-+ afe_priv->clks = devm_kcalloc(afe->dev, CLK_NUM,
-+ sizeof(*afe_priv->clks), GFP_KERNEL);
-+ if (!afe_priv->clks)
-+ return -ENOMEM;
-+ afe_priv->num_clks = CLK_NUM;
-+
-+ for (i = 0; i < afe_priv->num_clks; i++)
-+ afe_priv->clks[i].id = aud_clks[i];
-+
-+ ret = devm_clk_bulk_get(afe->dev, afe_priv->num_clks, afe_priv->clks);
-+ if (ret)
-+ return dev_err_probe(afe->dev, ret, "Failed to get clocks\n");
-+
-+ return 0;
-+}
-+
-+static irqreturn_t mt7986_afe_irq_handler(int irq_id, void *dev)
-+{
-+ struct mtk_base_afe *afe = dev;
-+ struct mtk_base_afe_irq *irq;
-+ u32 mcu_en, status, status_mcu;
-+ int i, ret;
-+ irqreturn_t irq_ret = IRQ_HANDLED;
-+
-+ /* get irq that is sent to MCU */
-+ regmap_read(afe->regmap, AFE_IRQ_MCU_EN, &mcu_en);
-+
-+ ret = regmap_read(afe->regmap, AFE_IRQ_MCU_STATUS, &status);
-+ /* only care IRQ which is sent to MCU */
-+ status_mcu = status & mcu_en & AFE_IRQ_STATUS_BITS;
-+
-+ if (ret || status_mcu == 0) {
-+ dev_err(afe->dev, "%s(), irq status err, ret %d, status 0x%x, mcu_en 0x%x\n",
-+ __func__, ret, status, mcu_en);
-+
-+ irq_ret = IRQ_NONE;
-+ goto err_irq;
-+ }
-+
-+ for (i = 0; i < MT7986_MEMIF_NUM; i++) {
-+ struct mtk_base_afe_memif *memif = &afe->memif[i];
-+
-+ if (!memif->substream)
-+ continue;
-+
-+ if (memif->irq_usage < 0)
-+ continue;
-+
-+ irq = &afe->irqs[memif->irq_usage];
-+
-+ if (status_mcu & (1 << irq->irq_data->irq_en_shift))
-+ snd_pcm_period_elapsed(memif->substream);
-+ }
-+
-+err_irq:
-+ /* clear irq */
-+ regmap_write(afe->regmap, AFE_IRQ_MCU_CLR, status_mcu);
-+
-+ return irq_ret;
-+}
-+
-+static int mt7986_afe_runtime_suspend(struct device *dev)
-+{
-+ struct mtk_base_afe *afe = dev_get_drvdata(dev);
-+ struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+
-+ if (!afe->regmap || afe_priv->pm_runtime_bypass_reg_ctl)
-+ goto skip_regmap;
-+
-+ /* disable clk*/
-+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON4, 0x3fff, 0x3fff);
-+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_APLL2_EN_MASK, 0);
-+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_26M_EN_MASK, 0);
-+
-+ /* make sure all irq status are cleared, twice intended */
-+ regmap_update_bits(afe->regmap, AFE_IRQ_MCU_CLR, 0xffff, 0xffff);
-+
-+skip_regmap:
-+ clk_bulk_disable_unprepare(afe_priv->num_clks, afe_priv->clks);
-+
-+ return 0;
-+}
-+
-+static int mt7986_afe_runtime_resume(struct device *dev)
-+{
-+ struct mtk_base_afe *afe = dev_get_drvdata(dev);
-+ struct mt7986_afe_private *afe_priv = afe->platform_priv;
-+ int ret;
-+
-+ ret = clk_bulk_prepare_enable(afe_priv->num_clks, afe_priv->clks);
-+ if (ret)
-+ return dev_err_probe(afe->dev, ret, "Failed to enable clocks\n");
-+
-+ if (!afe->regmap || afe_priv->pm_runtime_bypass_reg_ctl)
-+ return 0;
-+
-+ /* enable clk*/
-+ regmap_update_bits(afe->regmap, AUDIO_TOP_CON4, 0x3fff, 0);
-+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_APLL2_EN_MASK,
-+ AUD_APLL2_EN);
-+ regmap_update_bits(afe->regmap, AUDIO_ENGEN_CON0, AUD_26M_EN_MASK,
-+ AUD_26M_EN);
-+
-+ return 0;
-+}
-+
-+static int mt7986_afe_component_probe(struct snd_soc_component *component)
-+{
-+ return mtk_afe_add_sub_dai_control(component);
-+}
-+
-+static const struct snd_soc_component_driver mt7986_afe_component = {
-+ .name = AFE_PCM_NAME,
-+ .probe = mt7986_afe_component_probe,
-+ .pointer = mtk_afe_pcm_pointer,
-+ .pcm_construct = mtk_afe_pcm_new,
-+};
-+
-+static int mt7986_dai_memif_register(struct mtk_base_afe *afe)
-+{
-+ struct mtk_base_afe_dai *dai;
-+
-+ dai = devm_kzalloc(afe->dev, sizeof(*dai), GFP_KERNEL);
-+ if (!dai)
-+ return -ENOMEM;
-+
-+ list_add(&dai->list, &afe->sub_dais);
-+
-+ dai->dai_drivers = mt7986_memif_dai_driver;
-+ dai->num_dai_drivers = ARRAY_SIZE(mt7986_memif_dai_driver);
-+
-+ dai->dapm_widgets = mt7986_memif_widgets;
-+ dai->num_dapm_widgets = ARRAY_SIZE(mt7986_memif_widgets);
-+ dai->dapm_routes = mt7986_memif_routes;
-+ dai->num_dapm_routes = ARRAY_SIZE(mt7986_memif_routes);
-+
-+ return 0;
-+}
-+
-+typedef int (*dai_register_cb)(struct mtk_base_afe *);
-+static const dai_register_cb dai_register_cbs[] = {
-+ mt7986_dai_etdm_register,
-+ mt7986_dai_memif_register,
-+};
-+
-+static int mt7986_afe_pcm_dev_probe(struct platform_device *pdev)
-+{
-+ struct mtk_base_afe *afe;
-+ struct mt7986_afe_private *afe_priv;
-+ struct device *dev;
-+ int i, irq_id, ret;
-+
-+ afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL);
-+ if (!afe)
-+ return -ENOMEM;
-+ platform_set_drvdata(pdev, afe);
-+
-+ afe->platform_priv = devm_kzalloc(&pdev->dev, sizeof(*afe_priv),
-+ GFP_KERNEL);
-+ if (!afe->platform_priv)
-+ return -ENOMEM;
-+
-+ afe_priv = afe->platform_priv;
-+ afe->dev = &pdev->dev;
-+ dev = afe->dev;
-+
-+ afe->base_addr = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(afe->base_addr))
-+ return PTR_ERR(afe->base_addr);
-+
-+ /* initial audio related clock */
-+ ret = mt7986_init_clock(afe);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Cannot initialize clocks\n");
-+
-+ ret = devm_pm_runtime_enable(dev);
-+ if (ret)
-+ return ret;
-+
-+ /* enable clock for regcache get default value from hw */
-+ afe_priv->pm_runtime_bypass_reg_ctl = true;
-+ pm_runtime_get_sync(&pdev->dev);
-+
-+ afe->regmap = devm_regmap_init_mmio(&pdev->dev, afe->base_addr,
-+ &mt7986_afe_regmap_config);
-+
-+ pm_runtime_put_sync(&pdev->dev);
-+ if (IS_ERR(afe->regmap))
-+ return PTR_ERR(afe->regmap);
-+
-+ afe_priv->pm_runtime_bypass_reg_ctl = false;
-+
-+ /* init memif */
-+ afe->memif_size = MT7986_MEMIF_NUM;
-+ afe->memif = devm_kcalloc(dev, afe->memif_size, sizeof(*afe->memif),
-+ GFP_KERNEL);
-+ if (!afe->memif)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < afe->memif_size; i++) {
-+ afe->memif[i].data = &memif_data[i];
-+ afe->memif[i].irq_usage = -1;
-+ }
-+
-+ mutex_init(&afe->irq_alloc_lock);
-+
-+ /* irq initialize */
-+ afe->irqs_size = MT7986_IRQ_NUM;
-+ afe->irqs = devm_kcalloc(dev, afe->irqs_size, sizeof(*afe->irqs),
-+ GFP_KERNEL);
-+ if (!afe->irqs)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < afe->irqs_size; i++)
-+ afe->irqs[i].irq_data = &irq_data[i];
-+
-+ /* request irq */
-+ irq_id = platform_get_irq(pdev, 0);
-+ if (irq_id < 0) {
-+ ret = irq_id;
-+ return dev_err_probe(dev, ret, "No irq found\n");
-+ }
-+ ret = devm_request_irq(dev, irq_id, mt7986_afe_irq_handler,
-+ IRQF_TRIGGER_NONE, "asys-isr", (void *)afe);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Failed to request irq for asys-isr\n");
-+
-+ /* init sub_dais */
-+ INIT_LIST_HEAD(&afe->sub_dais);
-+
-+ for (i = 0; i < ARRAY_SIZE(dai_register_cbs); i++) {
-+ ret = dai_register_cbs[i](afe);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "DAI register failed, i: %d\n", i);
-+ }
-+
-+ /* init dai_driver and component_driver */
-+ ret = mtk_afe_combine_sub_dai(afe);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "mtk_afe_combine_sub_dai fail\n");
-+
-+ afe->mtk_afe_hardware = &mt7986_afe_hardware;
-+ afe->memif_fs = mt7986_memif_fs;
-+ afe->irq_fs = mt7986_irq_fs;
-+
-+ afe->runtime_resume = mt7986_afe_runtime_resume;
-+ afe->runtime_suspend = mt7986_afe_runtime_suspend;
-+
-+ /* register component */
-+ ret = devm_snd_soc_register_component(&pdev->dev,
-+ &mt7986_afe_component,
-+ NULL, 0);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Cannot register AFE component\n");
-+
-+ ret = devm_snd_soc_register_component(afe->dev,
-+ &mt7986_afe_pcm_dai_component,
-+ afe->dai_drivers,
-+ afe->num_dai_drivers);
-+ if (ret)
-+ return dev_err_probe(dev, ret, "Cannot register PCM DAI component\n");
-+
-+ return 0;
-+}
-+
-+static void mt7986_afe_pcm_dev_remove(struct platform_device *pdev)
-+{
-+ pm_runtime_disable(&pdev->dev);
-+ if (!pm_runtime_status_suspended(&pdev->dev))
-+ mt7986_afe_runtime_suspend(&pdev->dev);
-+}
-+
-+static const struct of_device_id mt7986_afe_pcm_dt_match[] = {
-+ { .compatible = "mediatek,mt7986-afe" },
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mt7986_afe_pcm_dt_match);
-+
-+static const struct dev_pm_ops mt7986_afe_pm_ops = {
-+ SET_RUNTIME_PM_OPS(mt7986_afe_runtime_suspend,
-+ mt7986_afe_runtime_resume, NULL)
-+};
-+
-+static struct platform_driver mt7986_afe_pcm_driver = {
-+ .driver = {
-+ .name = "mt7986-audio",
-+ .of_match_table = mt7986_afe_pcm_dt_match,
-+ .pm = &mt7986_afe_pm_ops,
-+ },
-+ .probe = mt7986_afe_pcm_dev_probe,
-+ .remove_new = mt7986_afe_pcm_dev_remove,
-+};
-+module_platform_driver(mt7986_afe_pcm_driver);
-+
-+MODULE_DESCRIPTION("MediaTek SoC AFE platform driver for ALSA MT7986");
-+MODULE_AUTHOR("Vic Wu <vic.wu@mediatek.com>");
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From ddf6abc1c78072f8ccad59166be95f0ca5af8ca4 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:36 +0800
-Subject: [PATCH 4/9] ASoC: mediatek: mt7986: add machine driver with wm8960
-
-Add support for mt7986 board with wm8960.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-5-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- sound/soc/mediatek/Kconfig | 10 ++
- sound/soc/mediatek/mt7986/Makefile | 1 +
- sound/soc/mediatek/mt7986/mt7986-wm8960.c | 196 ++++++++++++++++++++++
- 3 files changed, 207 insertions(+)
- create mode 100644 sound/soc/mediatek/mt7986/mt7986-wm8960.c
-
---- a/sound/soc/mediatek/Kconfig
-+++ b/sound/soc/mediatek/Kconfig
-@@ -64,6 +64,16 @@ config SND_SOC_MT7986
- Select Y if you have such device.
- If unsure select "N".
-
-+config SND_SOC_MT7986_WM8960
-+ tristate "ASoc Audio driver for MT7986 with WM8960 codec"
-+ depends on SND_SOC_MT7986 && I2C
-+ select SND_SOC_WM8960
-+ help
-+ This adds support for ASoC machine driver for MediaTek MT7986
-+ boards with the WM8960 codecs.
-+ Select Y if you have such device.
-+ If unsure select "N".
-+
- config SND_SOC_MT8173
- tristate "ASoC support for Mediatek MT8173 chip"
- depends on ARCH_MEDIATEK
---- a/sound/soc/mediatek/mt7986/Makefile
-+++ b/sound/soc/mediatek/mt7986/Makefile
-@@ -6,3 +6,4 @@ snd-soc-mt7986-afe-objs := \
- mt7986-dai-etdm.o
-
- obj-$(CONFIG_SND_SOC_MT7986) += snd-soc-mt7986-afe.o
-+obj-$(CONFIG_SND_SOC_MT7986_WM8960) += mt7986-wm8960.o
---- /dev/null
-+++ b/sound/soc/mediatek/mt7986/mt7986-wm8960.c
-@@ -0,0 +1,196 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * mt7986-wm8960.c -- MT7986-WM8960 ALSA SoC machine driver
-+ *
-+ * Copyright (c) 2023 MediaTek Inc.
-+ * Authors: Vic Wu <vic.wu@mediatek.com>
-+ * Maso Huang <maso.huang@mediatek.com>
-+ */
-+
-+#include <linux/module.h>
-+#include <sound/soc.h>
-+
-+#include "mt7986-afe-common.h"
-+
-+struct mt7986_wm8960_priv {
-+ struct device_node *platform_node;
-+ struct device_node *codec_node;
-+};
-+
-+static const struct snd_soc_dapm_widget mt7986_wm8960_widgets[] = {
-+ SND_SOC_DAPM_HP("Headphone", NULL),
-+ SND_SOC_DAPM_MIC("AMIC", NULL),
-+};
-+
-+static const struct snd_kcontrol_new mt7986_wm8960_controls[] = {
-+ SOC_DAPM_PIN_SWITCH("Headphone"),
-+ SOC_DAPM_PIN_SWITCH("AMIC"),
-+};
-+
-+SND_SOC_DAILINK_DEFS(playback,
-+ DAILINK_COMP_ARRAY(COMP_CPU("DL1")),
-+ DAILINK_COMP_ARRAY(COMP_DUMMY()),
-+ DAILINK_COMP_ARRAY(COMP_EMPTY()));
-+
-+SND_SOC_DAILINK_DEFS(capture,
-+ DAILINK_COMP_ARRAY(COMP_CPU("UL1")),
-+ DAILINK_COMP_ARRAY(COMP_DUMMY()),
-+ DAILINK_COMP_ARRAY(COMP_EMPTY()));
-+
-+SND_SOC_DAILINK_DEFS(codec,
-+ DAILINK_COMP_ARRAY(COMP_CPU("ETDM")),
-+ DAILINK_COMP_ARRAY(COMP_CODEC(NULL, "wm8960-hifi")),
-+ DAILINK_COMP_ARRAY(COMP_EMPTY()));
-+
-+static struct snd_soc_dai_link mt7986_wm8960_dai_links[] = {
-+ /* FE */
-+ {
-+ .name = "wm8960-playback",
-+ .stream_name = "wm8960-playback",
-+ .trigger = {SND_SOC_DPCM_TRIGGER_POST,
-+ SND_SOC_DPCM_TRIGGER_POST},
-+ .dynamic = 1,
-+ .dpcm_playback = 1,
-+ SND_SOC_DAILINK_REG(playback),
-+ },
-+ {
-+ .name = "wm8960-capture",
-+ .stream_name = "wm8960-capture",
-+ .trigger = {SND_SOC_DPCM_TRIGGER_POST,
-+ SND_SOC_DPCM_TRIGGER_POST},
-+ .dynamic = 1,
-+ .dpcm_capture = 1,
-+ SND_SOC_DAILINK_REG(capture),
-+ },
-+ /* BE */
-+ {
-+ .name = "wm8960-codec",
-+ .no_pcm = 1,
-+ .dai_fmt = SND_SOC_DAIFMT_I2S |
-+ SND_SOC_DAIFMT_NB_NF |
-+ SND_SOC_DAIFMT_CBS_CFS |
-+ SND_SOC_DAIFMT_GATED,
-+ .dpcm_playback = 1,
-+ .dpcm_capture = 1,
-+ SND_SOC_DAILINK_REG(codec),
-+ },
-+};
-+
-+static struct snd_soc_card mt7986_wm8960_card = {
-+ .name = "mt7986-wm8960",
-+ .owner = THIS_MODULE,
-+ .dai_link = mt7986_wm8960_dai_links,
-+ .num_links = ARRAY_SIZE(mt7986_wm8960_dai_links),
-+ .controls = mt7986_wm8960_controls,
-+ .num_controls = ARRAY_SIZE(mt7986_wm8960_controls),
-+ .dapm_widgets = mt7986_wm8960_widgets,
-+ .num_dapm_widgets = ARRAY_SIZE(mt7986_wm8960_widgets),
-+};
-+
-+static int mt7986_wm8960_machine_probe(struct platform_device *pdev)
-+{
-+ struct snd_soc_card *card = &mt7986_wm8960_card;
-+ struct snd_soc_dai_link *dai_link;
-+ struct device_node *platform, *codec;
-+ struct mt7986_wm8960_priv *priv;
-+ int ret, i;
-+
-+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ platform = of_get_child_by_name(pdev->dev.of_node, "platform");
-+
-+ if (platform) {
-+ priv->platform_node = of_parse_phandle(platform, "sound-dai", 0);
-+ of_node_put(platform);
-+
-+ if (!priv->platform_node) {
-+ dev_err(&pdev->dev, "Failed to parse platform/sound-dai property\n");
-+ return -EINVAL;
-+ }
-+ } else {
-+ dev_err(&pdev->dev, "Property 'platform' missing or invalid\n");
-+ return -EINVAL;
-+ }
-+
-+ for_each_card_prelinks(card, i, dai_link) {
-+ if (dai_link->platforms->name)
-+ continue;
-+ dai_link->platforms->of_node = priv->platform_node;
-+ }
-+
-+ card->dev = &pdev->dev;
-+
-+ codec = of_get_child_by_name(pdev->dev.of_node, "codec");
-+
-+ if (codec) {
-+ priv->codec_node = of_parse_phandle(codec, "sound-dai", 0);
-+ of_node_put(codec);
-+
-+ if (!priv->codec_node) {
-+ of_node_put(priv->platform_node);
-+ dev_err(&pdev->dev, "Failed to parse codec/sound-dai property\n");
-+ return -EINVAL;
-+ }
-+ } else {
-+ of_node_put(priv->platform_node);
-+ dev_err(&pdev->dev, "Property 'codec' missing or invalid\n");
-+ return -EINVAL;
-+ }
-+
-+ for_each_card_prelinks(card, i, dai_link) {
-+ if (dai_link->codecs->name)
-+ continue;
-+ dai_link->codecs->of_node = priv->codec_node;
-+ }
-+
-+ ret = snd_soc_of_parse_audio_routing(card, "audio-routing");
-+ if (ret) {
-+ dev_err(&pdev->dev, "Failed to parse audio-routing: %d\n", ret);
-+ goto err_of_node_put;
-+ }
-+
-+ ret = devm_snd_soc_register_card(&pdev->dev, card);
-+ if (ret) {
-+ dev_err(&pdev->dev, "%s snd_soc_register_card fail: %d\n", __func__, ret);
-+ goto err_of_node_put;
-+ }
-+
-+err_of_node_put:
-+ of_node_put(priv->codec_node);
-+ of_node_put(priv->platform_node);
-+ return ret;
-+}
-+
-+static void mt7986_wm8960_machine_remove(struct platform_device *pdev)
-+{
-+ struct snd_soc_card *card = platform_get_drvdata(pdev);
-+ struct mt7986_wm8960_priv *priv = snd_soc_card_get_drvdata(card);
-+
-+ of_node_put(priv->codec_node);
-+ of_node_put(priv->platform_node);
-+}
-+
-+static const struct of_device_id mt7986_wm8960_machine_dt_match[] = {
-+ {.compatible = "mediatek,mt7986-wm8960-sound"},
-+ { /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mt7986_wm8960_machine_dt_match);
-+
-+static struct platform_driver mt7986_wm8960_machine = {
-+ .driver = {
-+ .name = "mt7986-wm8960",
-+ .of_match_table = mt7986_wm8960_machine_dt_match,
-+ },
-+ .probe = mt7986_wm8960_machine_probe,
-+ .remove_new = mt7986_wm8960_machine_remove,
-+};
-+
-+module_platform_driver(mt7986_wm8960_machine);
-+
-+/* Module information */
-+MODULE_DESCRIPTION("MT7986 WM8960 ALSA SoC machine driver");
-+MODULE_AUTHOR("Vic Wu <vic.wu@mediatek.com>");
-+MODULE_LICENSE("GPL");
-+MODULE_ALIAS("mt7986 wm8960 soc card");
+++ /dev/null
-From 72469f950b629e57e60fbcbefed45e083619b986 Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:37 +0800
-Subject: [PATCH 5/9] ASoC: dt-bindings: mediatek,mt7986-wm8960: add
- mt7986-wm8960 document
-
-Add document for mt7986 board with wm8960.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-6-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../sound/mediatek,mt7986-wm8960.yaml | 67 +++++++++++++++++++
- 1 file changed, 67 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-wm8960.yaml
-@@ -0,0 +1,67 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-wm8960.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek MT7986 sound card with WM8960 codec
-+
-+maintainers:
-+ - Maso Huang <maso.huang@mediatek.com>
-+
-+allOf:
-+ - $ref: sound-card-common.yaml#
-+
-+properties:
-+ compatible:
-+ const: mediatek,mt7986-wm8960-sound
-+
-+ platform:
-+ type: object
-+ additionalProperties: false
-+ properties:
-+ sound-dai:
-+ description: The phandle of MT7986 platform.
-+ maxItems: 1
-+ required:
-+ - sound-dai
-+
-+ codec:
-+ type: object
-+ additionalProperties: false
-+ properties:
-+ sound-dai:
-+ description: The phandle of wm8960 codec.
-+ maxItems: 1
-+ required:
-+ - sound-dai
-+
-+unevaluatedProperties: false
-+
-+required:
-+ - compatible
-+ - audio-routing
-+ - platform
-+ - codec
-+
-+examples:
-+ - |
-+ sound {
-+ compatible = "mediatek,mt7986-wm8960-sound";
-+ model = "mt7986-wm8960";
-+ audio-routing =
-+ "Headphone", "HP_L",
-+ "Headphone", "HP_R",
-+ "LINPUT1", "AMIC",
-+ "RINPUT1", "AMIC";
-+
-+ platform {
-+ sound-dai = <&afe>;
-+ };
-+
-+ codec {
-+ sound-dai = <&wm8960>;
-+ };
-+ };
-+
-+...
+++ /dev/null
-From d16202eb38585adbc16e32d11188dbc2127015de Mon Sep 17 00:00:00 2001
-From: Maso Huang <maso.huang@mediatek.com>
-Date: Thu, 17 Aug 2023 18:13:38 +0800
-Subject: [PATCH 6/9] ASoC: dt-bindings: mediatek,mt7986-afe: add audio afe
- document
-
-Add mt7986 audio afe document.
-
-Signed-off-by: Maso Huang <maso.huang@mediatek.com>
-Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
-Link: https://lore.kernel.org/r/20230817101338.18782-7-maso.huang@mediatek.com
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- .../bindings/sound/mediatek,mt7986-afe.yaml | 160 ++++++++++++++++++
- 1 file changed, 160 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/sound/mediatek,mt7986-afe.yaml
-@@ -0,0 +1,160 @@
-+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/sound/mediatek,mt7986-afe.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: MediaTek AFE PCM controller for MT7986
-+
-+maintainers:
-+ - Maso Huang <maso.huang@mediatek.com>
-+
-+properties:
-+ compatible:
-+ oneOf:
-+ - const: mediatek,mt7986-afe
-+ - items:
-+ - enum:
-+ - mediatek,mt7981-afe
-+ - mediatek,mt7988-afe
-+ - const: mediatek,mt7986-afe
-+
-+ reg:
-+ maxItems: 1
-+
-+ interrupts:
-+ maxItems: 1
-+
-+ clocks:
-+ minItems: 5
-+ items:
-+ - description: audio bus clock
-+ - description: audio 26M clock
-+ - description: audio intbus clock
-+ - description: audio hopping clock
-+ - description: audio pll clock
-+ - description: mux for pcm_mck
-+ - description: audio i2s/pcm mck
-+
-+ clock-names:
-+ minItems: 5
-+ items:
-+ - const: bus_ck
-+ - const: 26m_ck
-+ - const: l_ck
-+ - const: aud_ck
-+ - const: eg2_ck
-+ - const: sel
-+ - const: i2s_m
-+
-+required:
-+ - compatible
-+ - reg
-+ - interrupts
-+ - clocks
-+ - clock-names
-+
-+allOf:
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ const: mediatek,mt7986-afe
-+ then:
-+ properties:
-+ clocks:
-+ items:
-+ - description: audio bus clock
-+ - description: audio 26M clock
-+ - description: audio intbus clock
-+ - description: audio hopping clock
-+ - description: audio pll clock
-+ clock-names:
-+ items:
-+ - const: bus_ck
-+ - const: 26m_ck
-+ - const: l_ck
-+ - const: aud_ck
-+ - const: eg2_ck
-+
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ const: mediatek,mt7981-afe
-+ then:
-+ properties:
-+ clocks:
-+ items:
-+ - description: audio bus clock
-+ - description: audio 26M clock
-+ - description: audio intbus clock
-+ - description: audio hopping clock
-+ - description: audio pll clock
-+ - description: mux for pcm_mck
-+ clock-names:
-+ items:
-+ - const: bus_ck
-+ - const: 26m_ck
-+ - const: l_ck
-+ - const: aud_ck
-+ - const: eg2_ck
-+ - const: sel
-+
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ const: mediatek,mt7988-afe
-+ then:
-+ properties:
-+ clocks:
-+ items:
-+ - description: audio bus clock
-+ - description: audio 26M clock
-+ - description: audio intbus clock
-+ - description: audio hopping clock
-+ - description: audio pll clock
-+ - description: mux for pcm_mck
-+ - description: audio i2s/pcm mck
-+ clock-names:
-+ items:
-+ - const: bus_ck
-+ - const: 26m_ck
-+ - const: l_ck
-+ - const: aud_ck
-+ - const: eg2_ck
-+ - const: sel
-+ - const: i2s_m
-+
-+additionalProperties: false
-+
-+examples:
-+ - |
-+ #include <dt-bindings/interrupt-controller/arm-gic.h>
-+ #include <dt-bindings/interrupt-controller/irq.h>
-+ #include <dt-bindings/clock/mt7986-clk.h>
-+
-+ afe@11210000 {
-+ compatible = "mediatek,mt7986-afe";
-+ reg = <0x11210000 0x9000>;
-+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&infracfg_ao CLK_INFRA_AUD_BUS_CK>,
-+ <&infracfg_ao CLK_INFRA_AUD_26M_CK>,
-+ <&infracfg_ao CLK_INFRA_AUD_L_CK>,
-+ <&infracfg_ao CLK_INFRA_AUD_AUD_CK>,
-+ <&infracfg_ao CLK_INFRA_AUD_EG2_CK>;
-+ clock-names = "bus_ck",
-+ "26m_ck",
-+ "l_ck",
-+ "aud_ck",
-+ "eg2_ck";
-+ assigned-clocks = <&topckgen CLK_TOP_A1SYS_SEL>,
-+ <&topckgen CLK_TOP_AUD_L_SEL>,
-+ <&topckgen CLK_TOP_A_TUNER_SEL>;
-+ assigned-clock-parents = <&topckgen CLK_TOP_APLL2_D4>,
-+ <&apmixedsys CLK_APMIXED_APLL2>,
-+ <&topckgen CLK_TOP_APLL2_D4>;
-+ };
-+
-+...
projects / openwrt / staging / stintel.git / commitdiff