--- /dev/null
+From ef972fc9f5743da589ce9546dd565d6c56e679b8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 8 Apr 2024 10:08:53 +0300
+Subject: [PATCH 1/2] net: dsa: mt7530: fix enabling EEE on MT7531 switch on
+ all boards
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
+brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
+enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
+(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
+the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
+SkyLake Huang (黃啟澤) from MediaTek for providing information on the
+internal EEE switch bit.
+
+There are existing boards that were not designed to pull the pin low.
+Because of that, the EEE status currently depends on the board design.
+
+The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
+used to control an LED. Once the bit is unset, the pin will be low. That
+will make the active low LED turn on. The pin is controlled by the switch
+PHY. It seems that the PHY controls the pin in the way that it inverts the
+pin state. That means depending on the wiring of the LED connected to
+LAN2LED0 on the board, the LED may be on without an active link.
+
+To not cause this unwanted behaviour whilst enabling EEE on all boards, set
+the internal EEE switch bit on the CORE_PLL_GROUP4 register.
+
+My testing on MT7531 shows a certain amount of traffic loss when EEE is
+enabled. That said, I haven't come across a board that enables EEE. So
+enable EEE on the switch MACs but disable EEE advertisement on the switch
+PHYs. This way, we don't change the behaviour of the majority of the boards
+that have this switch. The mediatek-ge PHY driver already disables EEE
+advertisement on the switch PHYs but my testing shows that it is somehow
+enabled afterwards. Disabling EEE advertisement before the PHY driver
+initialises keeps it off.
+
+With this change, EEE can now be enabled using ethtool.
+
+Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
+Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 17 ++++++++++++-----
+ drivers/net/dsa/mt7530.h | 1 +
+ 2 files changed, 13 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2496,18 +2496,25 @@ mt7531_setup(struct dsa_switch *ds)
+ mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
+ MT7531_GPIO0_INTERRUPT);
+
+- /* Enable PHY core PLL, since phy_device has not yet been created
+- * provided for phy_[read,write]_mmd_indirect is called, we provide
+- * our own mt7531_ind_mmd_phy_[read,write] to complete this
+- * function.
++ /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
++ * phy_device has not yet been created provided for
++ * phy_[read,write]_mmd_indirect is called, we provide our own
++ * mt7531_ind_mmd_phy_[read,write] to complete this function.
+ */
+ val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
+ MDIO_MMD_VEND2, CORE_PLL_GROUP4);
+- val |= MT7531_PHY_PLL_BYPASS_MODE;
++ val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
+ val &= ~MT7531_PHY_PLL_OFF;
+ mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
+ CORE_PLL_GROUP4, val);
+
++ /* Disable EEE advertisement on the switch PHYs. */
++ for (i = MT753X_CTRL_PHY_ADDR;
++ i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
++ mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
++ 0);
++ }
++
+ mt7531_setup_common(ds);
+
+ /* Setup VLAN ID 0 for VLAN-unaware bridges */
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -616,6 +616,7 @@ enum mt7531_clk_skew {
+ #define RG_SYSPLL_DDSFBK_EN BIT(12)
+ #define RG_SYSPLL_BIAS_EN BIT(11)
+ #define RG_SYSPLL_BIAS_LPF_EN BIT(10)
++#define MT7531_RG_SYSPLL_DMY2 BIT(6)
+ #define MT7531_PHY_PLL_OFF BIT(5)
+ #define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
+
--- /dev/null
+From b7427d66cb3d6dca5165de5f7d80d59f08c2795b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Tue, 9 Apr 2024 18:01:14 +0300
+Subject: [PATCH 2/2] net: dsa: mt7530: trap link-local frames regardless of ST
+ Port State
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer
+(DLL) of the Open Systems Interconnection basic reference model (OSI/RM)
+are described; the medium access control (MAC) and logical link control
+(LLC) sublayers. The MAC sublayer is the one facing the physical layer.
+
+In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
+Bridge component comprises a MAC Relay Entity for interconnecting the Ports
+of the Bridge, at least two Ports, and higher layer entities with at least
+a Spanning Tree Protocol Entity included.
+
+Each Bridge Port also functions as an end station and shall provide the MAC
+Service to an LLC Entity. Each instance of the MAC Service is provided to a
+distinct LLC Entity that supports protocol identification, multiplexing,
+and demultiplexing, for protocol data unit (PDU) transmission and reception
+by one or more higher layer entities.
+
+It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
+Entity associated with each Bridge Port is modeled as being directly
+connected to the attached Local Area Network (LAN).
+
+On the switch with CPU port architecture, CPU port functions as Management
+Port, and the Management Port functionality is provided by software which
+functions as an end station. Software is connected to an IEEE 802 LAN that
+is wholly contained within the system that incorporates the Bridge.
+Software provides access to the LLC Entity associated with each Bridge Port
+by the value of the source port field on the special tag on the frame
+received by software.
+
+We call frames that carry control information to determine the active
+topology and current extent of each Virtual Local Area Network (VLAN),
+i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN
+Registration Protocol Data Units (MVRPDUs), and frames from other link
+constrained protocols, such as Extensible Authentication Protocol over LAN
+(EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They
+are not forwarded by a Bridge. Permanently configured entries in the
+filtering database (FDB) ensure that such frames are discarded by the
+Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in
+detail:
+
+Each of the reserved MAC addresses specified in Table 8-1
+(01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
+permanently configured in the FDB in C-VLAN components and ERs.
+
+Each of the reserved MAC addresses specified in Table 8-2
+(01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
+configured in the FDB in S-VLAN components.
+
+Each of the reserved MAC addresses specified in Table 8-3
+(01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB
+in TPMR components.
+
+The FDB entries for reserved MAC addresses shall specify filtering for all
+Bridge Ports and all VIDs. Management shall not provide the capability to
+modify or remove entries for reserved MAC addresses.
+
+The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
+propagation of PDUs within a Bridged Network, as follows:
+
+ The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that
+ no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
+ component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
+ PDUs transmitted using this destination address, or any other addresses
+ that appear in Table 8-1, Table 8-2, and Table 8-3
+ (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
+ therefore travel no further than those stations that can be reached via a
+ single individual LAN from the originating station.
+
+ The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
+ address that no conformant S-VLAN component, C-VLAN component, or MAC
+ Bridge can forward; however, this address is relayed by a TPMR component.
+ PDUs using this destination address, or any of the other addresses that
+ appear in both Table 8-1 and Table 8-2 but not in Table 8-3
+ (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed
+ by any TPMRs but will propagate no further than the nearest S-VLAN
+ component, C-VLAN component, or MAC Bridge.
+
+ The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an
+ address that no conformant C-VLAN component, MAC Bridge can forward;
+ however, it is relayed by TPMR components and S-VLAN components. PDUs
+ using this destination address, or any of the other addresses that appear
+ in Table 8-1 but not in either Table 8-2 or Table 8-3
+ (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and
+ S-VLAN components but will propagate no further than the nearest C-VLAN
+ component or MAC Bridge.
+
+Because the LLC Entity associated with each Bridge Port is provided via CPU
+port, we must not filter these frames but forward them to CPU port.
+
+In a Bridge, the transmission Port is majorly decided by ingress and egress
+rules, FDB, and spanning tree Port State functions of the Forwarding
+Process. For link-local frames, only CPU port should be designated as
+destination port in the FDB, and the other functions of the Forwarding
+Process must not interfere with the decision of the transmission Port. We
+call this process trapping frames to CPU port.
+
+Therefore, on the switch with CPU port architecture, link-local frames must
+be trapped to CPU port, and certain link-local frames received by a Port of
+a Bridge comprising a TPMR component or an S-VLAN component must be
+excluded from it.
+
+A Bridge of the switch with CPU port architecture cannot comprise a
+Two-Port MAC Relay (TPMR) component as a TPMR component supports only a
+subset of the functionality of a MAC Bridge. A Bridge comprising two Ports
+(Management Port doesn't count) of this architecture will either function
+as a standard MAC Bridge or a standard VLAN Bridge.
+
+Therefore, a Bridge of this architecture can only comprise S-VLAN
+components, C-VLAN components, or MAC Bridge components. Since there's no
+TPMR component, we don't need to relay PDUs using the destination addresses
+specified on the Nearest non-TPMR section, and the proportion of the
+Nearest Customer Bridge section where they must be relayed by TPMR
+components.
+
+One option to trap link-local frames to CPU port is to add static FDB
+entries with CPU port designated as destination port. However, because that
+Independent VLAN Learning (IVL) is being used on every VID, each entry only
+applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
+Bridge component or a C-VLAN component, there would have to be 16 times
+4096 entries. This switch intellectual property can only hold a maximum of
+2048 entries. Using this option, there also isn't a mechanism to prevent
+link-local frames from being discarded when the spanning tree Port State of
+the reception Port is discarding.
+
+The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
+registers. Whilst this applies to every VID, it doesn't contain all of the
+reserved MAC addresses without affecting the remaining Standard Group MAC
+Addresses. The REV_UN frame tag utilised using the RGAC4 register covers
+the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
+addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
+destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
+The latter option provides better but not complete conformance.
+
+This switch intellectual property also does not provide a mechanism to trap
+link-local frames with specific destination addresses to CPU port by
+Bridge, to conform to the filtering rules for the distinct Bridge
+components.
+
+Therefore, regardless of the type of the Bridge component, link-local
+frames with these destination addresses will be trapped to CPU port:
+
+01-80-C2-00-00-[00,01,02,03,0E]
+
+In a Bridge comprising a MAC Bridge component or a C-VLAN component:
+
+ Link-local frames with these destination addresses won't be trapped to
+ CPU port which won't conform to IEEE Std 802.1Q-2022:
+
+ 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
+
+In a Bridge comprising an S-VLAN component:
+
+ Link-local frames with these destination addresses will be trapped to CPU
+ port which won't conform to IEEE Std 802.1Q-2022:
+
+ 01-80-C2-00-00-00
+
+ Link-local frames with these destination addresses won't be trapped to
+ CPU port which won't conform to IEEE Std 802.1Q-2022:
+
+ 01-80-C2-00-00-[04,05,06,07,08,09,0A]
+
+Currently on this switch intellectual property, if the spanning tree Port
+State of the reception Port is discarding, link-local frames will be
+discarded.
+
+To trap link-local frames regardless of the spanning tree Port State, make
+the switch regard them as Bridge Protocol Data Units (BPDUs). This switch
+intellectual property only lets the frames regarded as BPDUs bypass the
+spanning tree Port State function of the Forwarding Process.
+
+With this change, the only remaining interference is the ingress rules.
+When the reception Port has no PVID assigned on software, VLAN-untagged
+frames won't be allowed in. There doesn't seem to be a mechanism on the
+switch intellectual property to have link-local frames bypass this function
+of the Forwarding Process.
+
+Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
+Reviewed-by: Daniel Golle <daniel@makrotopia.org>
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 229 +++++++++++++++++++++++++++++++++------
+ drivers/net/dsa/mt7530.h | 5 +
+ 2 files changed, 200 insertions(+), 34 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -943,20 +943,173 @@ static void mt7530_setup_port5(struct ds
+ mutex_unlock(&priv->reg_mutex);
+ }
+
+-/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
+- * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
+- * must only be propagated to C-VLAN and MAC Bridge components. That means
+- * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
+- * these frames are supposed to be processed by the CPU (software). So we make
+- * the switch only forward them to the CPU port. And if received from a CPU
+- * port, forward to a single port. The software is responsible of making the
+- * switch conform to the latter by setting a single port as destination port on
+- * the special tag.
+- *
+- * This switch intellectual property cannot conform to this part of the standard
+- * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
+- * DAs, it also includes :22-FF which the scope of propagation is not supposed
+- * to be restricted for these MAC DAs.
++/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL)
++ * of the Open Systems Interconnection basic reference model (OSI/RM) are
++ * described; the medium access control (MAC) and logical link control (LLC)
++ * sublayers. The MAC sublayer is the one facing the physical layer.
++ *
++ * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
++ * Bridge component comprises a MAC Relay Entity for interconnecting the Ports
++ * of the Bridge, at least two Ports, and higher layer entities with at least a
++ * Spanning Tree Protocol Entity included.
++ *
++ * Each Bridge Port also functions as an end station and shall provide the MAC
++ * Service to an LLC Entity. Each instance of the MAC Service is provided to a
++ * distinct LLC Entity that supports protocol identification, multiplexing, and
++ * demultiplexing, for protocol data unit (PDU) transmission and reception by
++ * one or more higher layer entities.
++ *
++ * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
++ * Entity associated with each Bridge Port is modeled as being directly
++ * connected to the attached Local Area Network (LAN).
++ *
++ * On the switch with CPU port architecture, CPU port functions as Management
++ * Port, and the Management Port functionality is provided by software which
++ * functions as an end station. Software is connected to an IEEE 802 LAN that is
++ * wholly contained within the system that incorporates the Bridge. Software
++ * provides access to the LLC Entity associated with each Bridge Port by the
++ * value of the source port field on the special tag on the frame received by
++ * software.
++ *
++ * We call frames that carry control information to determine the active
++ * topology and current extent of each Virtual Local Area Network (VLAN), i.e.,
++ * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration
++ * Protocol Data Units (MVRPDUs), and frames from other link constrained
++ * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and
++ * Link Layer Discovery Protocol (LLDP), link-local frames. They are not
++ * forwarded by a Bridge. Permanently configured entries in the filtering
++ * database (FDB) ensure that such frames are discarded by the Forwarding
++ * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail:
++ *
++ * Each of the reserved MAC addresses specified in Table 8-1
++ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
++ * permanently configured in the FDB in C-VLAN components and ERs.
++ *
++ * Each of the reserved MAC addresses specified in Table 8-2
++ * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
++ * configured in the FDB in S-VLAN components.
++ *
++ * Each of the reserved MAC addresses specified in Table 8-3
++ * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in
++ * TPMR components.
++ *
++ * The FDB entries for reserved MAC addresses shall specify filtering for all
++ * Bridge Ports and all VIDs. Management shall not provide the capability to
++ * modify or remove entries for reserved MAC addresses.
++ *
++ * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
++ * propagation of PDUs within a Bridged Network, as follows:
++ *
++ * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no
++ * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
++ * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
++ * PDUs transmitted using this destination address, or any other addresses
++ * that appear in Table 8-1, Table 8-2, and Table 8-3
++ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
++ * therefore travel no further than those stations that can be reached via a
++ * single individual LAN from the originating station.
++ *
++ * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
++ * address that no conformant S-VLAN component, C-VLAN component, or MAC
++ * Bridge can forward; however, this address is relayed by a TPMR component.
++ * PDUs using this destination address, or any of the other addresses that
++ * appear in both Table 8-1 and Table 8-2 but not in Table 8-3
++ * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by
++ * any TPMRs but will propagate no further than the nearest S-VLAN component,
++ * C-VLAN component, or MAC Bridge.
++ *
++ * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address
++ * that no conformant C-VLAN component, MAC Bridge can forward; however, it is
++ * relayed by TPMR components and S-VLAN components. PDUs using this
++ * destination address, or any of the other addresses that appear in Table 8-1
++ * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]),
++ * will be relayed by TPMR components and S-VLAN components but will propagate
++ * no further than the nearest C-VLAN component or MAC Bridge.
++ *
++ * Because the LLC Entity associated with each Bridge Port is provided via CPU
++ * port, we must not filter these frames but forward them to CPU port.
++ *
++ * In a Bridge, the transmission Port is majorly decided by ingress and egress
++ * rules, FDB, and spanning tree Port State functions of the Forwarding Process.
++ * For link-local frames, only CPU port should be designated as destination port
++ * in the FDB, and the other functions of the Forwarding Process must not
++ * interfere with the decision of the transmission Port. We call this process
++ * trapping frames to CPU port.
++ *
++ * Therefore, on the switch with CPU port architecture, link-local frames must
++ * be trapped to CPU port, and certain link-local frames received by a Port of a
++ * Bridge comprising a TPMR component or an S-VLAN component must be excluded
++ * from it.
++ *
++ * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port
++ * MAC Relay (TPMR) component as a TPMR component supports only a subset of the
++ * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port
++ * doesn't count) of this architecture will either function as a standard MAC
++ * Bridge or a standard VLAN Bridge.
++ *
++ * Therefore, a Bridge of this architecture can only comprise S-VLAN components,
++ * C-VLAN components, or MAC Bridge components. Since there's no TPMR component,
++ * we don't need to relay PDUs using the destination addresses specified on the
++ * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge
++ * section where they must be relayed by TPMR components.
++ *
++ * One option to trap link-local frames to CPU port is to add static FDB entries
++ * with CPU port designated as destination port. However, because that
++ * Independent VLAN Learning (IVL) is being used on every VID, each entry only
++ * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
++ * Bridge component or a C-VLAN component, there would have to be 16 times 4096
++ * entries. This switch intellectual property can only hold a maximum of 2048
++ * entries. Using this option, there also isn't a mechanism to prevent
++ * link-local frames from being discarded when the spanning tree Port State of
++ * the reception Port is discarding.
++ *
++ * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
++ * registers. Whilst this applies to every VID, it doesn't contain all of the
++ * reserved MAC addresses without affecting the remaining Standard Group MAC
++ * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the
++ * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
++ * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
++ * destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
++ * The latter option provides better but not complete conformance.
++ *
++ * This switch intellectual property also does not provide a mechanism to trap
++ * link-local frames with specific destination addresses to CPU port by Bridge,
++ * to conform to the filtering rules for the distinct Bridge components.
++ *
++ * Therefore, regardless of the type of the Bridge component, link-local frames
++ * with these destination addresses will be trapped to CPU port:
++ *
++ * 01-80-C2-00-00-[00,01,02,03,0E]
++ *
++ * In a Bridge comprising a MAC Bridge component or a C-VLAN component:
++ *
++ * Link-local frames with these destination addresses won't be trapped to CPU
++ * port which won't conform to IEEE Std 802.1Q-2022:
++ *
++ * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
++ *
++ * In a Bridge comprising an S-VLAN component:
++ *
++ * Link-local frames with these destination addresses will be trapped to CPU
++ * port which won't conform to IEEE Std 802.1Q-2022:
++ *
++ * 01-80-C2-00-00-00
++ *
++ * Link-local frames with these destination addresses won't be trapped to CPU
++ * port which won't conform to IEEE Std 802.1Q-2022:
++ *
++ * 01-80-C2-00-00-[04,05,06,07,08,09,0A]
++ *
++ * To trap link-local frames to CPU port as conformant as this switch
++ * intellectual property can allow, link-local frames are made to be regarded as
++ * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual
++ * property only lets the frames regarded as BPDUs bypass the spanning tree Port
++ * State function of the Forwarding Process.
++ *
++ * The only remaining interference is the ingress rules. When the reception Port
++ * has no PVID assigned on software, VLAN-untagged frames won't be allowed in.
++ * There doesn't seem to be a mechanism on the switch intellectual property to
++ * have link-local frames bypass this function of the Forwarding Process.
+ */
+ static void
+ mt753x_trap_frames(struct mt7530_priv *priv)
+@@ -964,35 +1117,43 @@ mt753x_trap_frames(struct mt7530_priv *p
+ /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them
+ * VLAN-untagged.
+ */
+- mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK |
+- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
+- MT753X_BPDU_PORT_FW_MASK,
+- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ mt7530_rmw(priv, MT753X_BPC,
++ MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
++ MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
++ MT753X_BPDU_PORT_FW_MASK,
++ MT753X_PAE_BPDU_FR |
++ MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
++ MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_BPDU_CPU_ONLY);
+
+ /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+- mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
+- MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
+- MT753X_R01_PORT_FW_MASK,
+- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ mt7530_rmw(priv, MT753X_RGAC1,
++ MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
++ MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
++ MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
++ MT753X_R02_BPDU_FR |
++ MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
++ MT753X_R01_BPDU_FR |
++ MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_BPDU_CPU_ONLY);
+
+ /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+- mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
+- MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
+- MT753X_R03_PORT_FW_MASK,
+- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ mt7530_rmw(priv, MT753X_RGAC2,
++ MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
++ MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
++ MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
++ MT753X_R0E_BPDU_FR |
++ MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
++ MT753X_R03_BPDU_FR |
++ MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_BPDU_CPU_ONLY);
+ }
+
+ static void
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -65,6 +65,7 @@ enum mt753x_id {
+
+ /* Registers for BPDU and PAE frame control*/
+ #define MT753X_BPC 0x24
++#define MT753X_PAE_BPDU_FR BIT(25)
+ #define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
+ #define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
+ #define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
+@@ -75,20 +76,24 @@ enum mt753x_id {
+
+ /* Register for :01 and :02 MAC DA frame control */
+ #define MT753X_RGAC1 0x28
++#define MT753X_R02_BPDU_FR BIT(25)
+ #define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
+ #define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
+ #define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
+ #define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
++#define MT753X_R01_BPDU_FR BIT(9)
+ #define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
+ #define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
+ #define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
+
+ /* Register for :03 and :0E MAC DA frame control */
+ #define MT753X_RGAC2 0x2c
++#define MT753X_R0E_BPDU_FR BIT(25)
+ #define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
+ #define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
+ #define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
+ #define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
++#define MT753X_R03_BPDU_FR BIT(9)
+ #define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
+ #define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
+ #define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
--- /dev/null
+From ef972fc9f5743da589ce9546dd565d6c56e679b8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Mon, 8 Apr 2024 10:08:53 +0300
+Subject: [PATCH 1/2] net: dsa: mt7530: fix enabling EEE on MT7531 switch on
+ all boards
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
+brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
+enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
+(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
+the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
+SkyLake Huang (黃啟澤) from MediaTek for providing information on the
+internal EEE switch bit.
+
+There are existing boards that were not designed to pull the pin low.
+Because of that, the EEE status currently depends on the board design.
+
+The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
+used to control an LED. Once the bit is unset, the pin will be low. That
+will make the active low LED turn on. The pin is controlled by the switch
+PHY. It seems that the PHY controls the pin in the way that it inverts the
+pin state. That means depending on the wiring of the LED connected to
+LAN2LED0 on the board, the LED may be on without an active link.
+
+To not cause this unwanted behaviour whilst enabling EEE on all boards, set
+the internal EEE switch bit on the CORE_PLL_GROUP4 register.
+
+My testing on MT7531 shows a certain amount of traffic loss when EEE is
+enabled. That said, I haven't come across a board that enables EEE. So
+enable EEE on the switch MACs but disable EEE advertisement on the switch
+PHYs. This way, we don't change the behaviour of the majority of the boards
+that have this switch. The mediatek-ge PHY driver already disables EEE
+advertisement on the switch PHYs but my testing shows that it is somehow
+enabled afterwards. Disabling EEE advertisement before the PHY driver
+initialises keeps it off.
+
+With this change, EEE can now be enabled using ethtool.
+
+Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
+Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 17 ++++++++++++-----
+ drivers/net/dsa/mt7530.h | 1 +
+ 2 files changed, 13 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -2505,18 +2505,25 @@ mt7531_setup(struct dsa_switch *ds)
+ mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
+ MT7531_GPIO0_INTERRUPT);
+
+- /* Enable PHY core PLL, since phy_device has not yet been created
+- * provided for phy_[read,write]_mmd_indirect is called, we provide
+- * our own mt7531_ind_mmd_phy_[read,write] to complete this
+- * function.
++ /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
++ * phy_device has not yet been created provided for
++ * phy_[read,write]_mmd_indirect is called, we provide our own
++ * mt7531_ind_mmd_phy_[read,write] to complete this function.
+ */
+ val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
+ MDIO_MMD_VEND2, CORE_PLL_GROUP4);
+- val |= MT7531_PHY_PLL_BYPASS_MODE;
++ val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
+ val &= ~MT7531_PHY_PLL_OFF;
+ mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
+ CORE_PLL_GROUP4, val);
+
++ /* Disable EEE advertisement on the switch PHYs. */
++ for (i = MT753X_CTRL_PHY_ADDR;
++ i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
++ mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
++ 0);
++ }
++
+ mt7531_setup_common(ds);
+
+ /* Setup VLAN ID 0 for VLAN-unaware bridges */
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -616,6 +616,7 @@ enum mt7531_clk_skew {
+ #define RG_SYSPLL_DDSFBK_EN BIT(12)
+ #define RG_SYSPLL_BIAS_EN BIT(11)
+ #define RG_SYSPLL_BIAS_LPF_EN BIT(10)
++#define MT7531_RG_SYSPLL_DMY2 BIT(6)
+ #define MT7531_PHY_PLL_OFF BIT(5)
+ #define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
+
--- /dev/null
+From b7427d66cb3d6dca5165de5f7d80d59f08c2795b Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Tue, 9 Apr 2024 18:01:14 +0300
+Subject: [PATCH 2/2] net: dsa: mt7530: trap link-local frames regardless of ST
+ Port State
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer
+(DLL) of the Open Systems Interconnection basic reference model (OSI/RM)
+are described; the medium access control (MAC) and logical link control
+(LLC) sublayers. The MAC sublayer is the one facing the physical layer.
+
+In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
+Bridge component comprises a MAC Relay Entity for interconnecting the Ports
+of the Bridge, at least two Ports, and higher layer entities with at least
+a Spanning Tree Protocol Entity included.
+
+Each Bridge Port also functions as an end station and shall provide the MAC
+Service to an LLC Entity. Each instance of the MAC Service is provided to a
+distinct LLC Entity that supports protocol identification, multiplexing,
+and demultiplexing, for protocol data unit (PDU) transmission and reception
+by one or more higher layer entities.
+
+It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
+Entity associated with each Bridge Port is modeled as being directly
+connected to the attached Local Area Network (LAN).
+
+On the switch with CPU port architecture, CPU port functions as Management
+Port, and the Management Port functionality is provided by software which
+functions as an end station. Software is connected to an IEEE 802 LAN that
+is wholly contained within the system that incorporates the Bridge.
+Software provides access to the LLC Entity associated with each Bridge Port
+by the value of the source port field on the special tag on the frame
+received by software.
+
+We call frames that carry control information to determine the active
+topology and current extent of each Virtual Local Area Network (VLAN),
+i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN
+Registration Protocol Data Units (MVRPDUs), and frames from other link
+constrained protocols, such as Extensible Authentication Protocol over LAN
+(EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They
+are not forwarded by a Bridge. Permanently configured entries in the
+filtering database (FDB) ensure that such frames are discarded by the
+Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in
+detail:
+
+Each of the reserved MAC addresses specified in Table 8-1
+(01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
+permanently configured in the FDB in C-VLAN components and ERs.
+
+Each of the reserved MAC addresses specified in Table 8-2
+(01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
+configured in the FDB in S-VLAN components.
+
+Each of the reserved MAC addresses specified in Table 8-3
+(01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB
+in TPMR components.
+
+The FDB entries for reserved MAC addresses shall specify filtering for all
+Bridge Ports and all VIDs. Management shall not provide the capability to
+modify or remove entries for reserved MAC addresses.
+
+The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
+propagation of PDUs within a Bridged Network, as follows:
+
+ The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that
+ no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
+ component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
+ PDUs transmitted using this destination address, or any other addresses
+ that appear in Table 8-1, Table 8-2, and Table 8-3
+ (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
+ therefore travel no further than those stations that can be reached via a
+ single individual LAN from the originating station.
+
+ The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
+ address that no conformant S-VLAN component, C-VLAN component, or MAC
+ Bridge can forward; however, this address is relayed by a TPMR component.
+ PDUs using this destination address, or any of the other addresses that
+ appear in both Table 8-1 and Table 8-2 but not in Table 8-3
+ (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed
+ by any TPMRs but will propagate no further than the nearest S-VLAN
+ component, C-VLAN component, or MAC Bridge.
+
+ The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an
+ address that no conformant C-VLAN component, MAC Bridge can forward;
+ however, it is relayed by TPMR components and S-VLAN components. PDUs
+ using this destination address, or any of the other addresses that appear
+ in Table 8-1 but not in either Table 8-2 or Table 8-3
+ (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and
+ S-VLAN components but will propagate no further than the nearest C-VLAN
+ component or MAC Bridge.
+
+Because the LLC Entity associated with each Bridge Port is provided via CPU
+port, we must not filter these frames but forward them to CPU port.
+
+In a Bridge, the transmission Port is majorly decided by ingress and egress
+rules, FDB, and spanning tree Port State functions of the Forwarding
+Process. For link-local frames, only CPU port should be designated as
+destination port in the FDB, and the other functions of the Forwarding
+Process must not interfere with the decision of the transmission Port. We
+call this process trapping frames to CPU port.
+
+Therefore, on the switch with CPU port architecture, link-local frames must
+be trapped to CPU port, and certain link-local frames received by a Port of
+a Bridge comprising a TPMR component or an S-VLAN component must be
+excluded from it.
+
+A Bridge of the switch with CPU port architecture cannot comprise a
+Two-Port MAC Relay (TPMR) component as a TPMR component supports only a
+subset of the functionality of a MAC Bridge. A Bridge comprising two Ports
+(Management Port doesn't count) of this architecture will either function
+as a standard MAC Bridge or a standard VLAN Bridge.
+
+Therefore, a Bridge of this architecture can only comprise S-VLAN
+components, C-VLAN components, or MAC Bridge components. Since there's no
+TPMR component, we don't need to relay PDUs using the destination addresses
+specified on the Nearest non-TPMR section, and the proportion of the
+Nearest Customer Bridge section where they must be relayed by TPMR
+components.
+
+One option to trap link-local frames to CPU port is to add static FDB
+entries with CPU port designated as destination port. However, because that
+Independent VLAN Learning (IVL) is being used on every VID, each entry only
+applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
+Bridge component or a C-VLAN component, there would have to be 16 times
+4096 entries. This switch intellectual property can only hold a maximum of
+2048 entries. Using this option, there also isn't a mechanism to prevent
+link-local frames from being discarded when the spanning tree Port State of
+the reception Port is discarding.
+
+The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
+registers. Whilst this applies to every VID, it doesn't contain all of the
+reserved MAC addresses without affecting the remaining Standard Group MAC
+Addresses. The REV_UN frame tag utilised using the RGAC4 register covers
+the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
+addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
+destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
+The latter option provides better but not complete conformance.
+
+This switch intellectual property also does not provide a mechanism to trap
+link-local frames with specific destination addresses to CPU port by
+Bridge, to conform to the filtering rules for the distinct Bridge
+components.
+
+Therefore, regardless of the type of the Bridge component, link-local
+frames with these destination addresses will be trapped to CPU port:
+
+01-80-C2-00-00-[00,01,02,03,0E]
+
+In a Bridge comprising a MAC Bridge component or a C-VLAN component:
+
+ Link-local frames with these destination addresses won't be trapped to
+ CPU port which won't conform to IEEE Std 802.1Q-2022:
+
+ 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
+
+In a Bridge comprising an S-VLAN component:
+
+ Link-local frames with these destination addresses will be trapped to CPU
+ port which won't conform to IEEE Std 802.1Q-2022:
+
+ 01-80-C2-00-00-00
+
+ Link-local frames with these destination addresses won't be trapped to
+ CPU port which won't conform to IEEE Std 802.1Q-2022:
+
+ 01-80-C2-00-00-[04,05,06,07,08,09,0A]
+
+Currently on this switch intellectual property, if the spanning tree Port
+State of the reception Port is discarding, link-local frames will be
+discarded.
+
+To trap link-local frames regardless of the spanning tree Port State, make
+the switch regard them as Bridge Protocol Data Units (BPDUs). This switch
+intellectual property only lets the frames regarded as BPDUs bypass the
+spanning tree Port State function of the Forwarding Process.
+
+With this change, the only remaining interference is the ingress rules.
+When the reception Port has no PVID assigned on software, VLAN-untagged
+frames won't be allowed in. There doesn't seem to be a mechanism on the
+switch intellectual property to have link-local frames bypass this function
+of the Forwarding Process.
+
+Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
+Reviewed-by: Daniel Golle <daniel@makrotopia.org>
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+---
+ drivers/net/dsa/mt7530.c | 229 +++++++++++++++++++++++++++++++++------
+ drivers/net/dsa/mt7530.h | 5 +
+ 2 files changed, 200 insertions(+), 34 deletions(-)
+
+--- a/drivers/net/dsa/mt7530.c
++++ b/drivers/net/dsa/mt7530.c
+@@ -950,20 +950,173 @@ static void mt7530_setup_port5(struct ds
+ mutex_unlock(&priv->reg_mutex);
+ }
+
+-/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std
+- * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA
+- * must only be propagated to C-VLAN and MAC Bridge components. That means
+- * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports,
+- * these frames are supposed to be processed by the CPU (software). So we make
+- * the switch only forward them to the CPU port. And if received from a CPU
+- * port, forward to a single port. The software is responsible of making the
+- * switch conform to the latter by setting a single port as destination port on
+- * the special tag.
+- *
+- * This switch intellectual property cannot conform to this part of the standard
+- * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC
+- * DAs, it also includes :22-FF which the scope of propagation is not supposed
+- * to be restricted for these MAC DAs.
++/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL)
++ * of the Open Systems Interconnection basic reference model (OSI/RM) are
++ * described; the medium access control (MAC) and logical link control (LLC)
++ * sublayers. The MAC sublayer is the one facing the physical layer.
++ *
++ * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A
++ * Bridge component comprises a MAC Relay Entity for interconnecting the Ports
++ * of the Bridge, at least two Ports, and higher layer entities with at least a
++ * Spanning Tree Protocol Entity included.
++ *
++ * Each Bridge Port also functions as an end station and shall provide the MAC
++ * Service to an LLC Entity. Each instance of the MAC Service is provided to a
++ * distinct LLC Entity that supports protocol identification, multiplexing, and
++ * demultiplexing, for protocol data unit (PDU) transmission and reception by
++ * one or more higher layer entities.
++ *
++ * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC
++ * Entity associated with each Bridge Port is modeled as being directly
++ * connected to the attached Local Area Network (LAN).
++ *
++ * On the switch with CPU port architecture, CPU port functions as Management
++ * Port, and the Management Port functionality is provided by software which
++ * functions as an end station. Software is connected to an IEEE 802 LAN that is
++ * wholly contained within the system that incorporates the Bridge. Software
++ * provides access to the LLC Entity associated with each Bridge Port by the
++ * value of the source port field on the special tag on the frame received by
++ * software.
++ *
++ * We call frames that carry control information to determine the active
++ * topology and current extent of each Virtual Local Area Network (VLAN), i.e.,
++ * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration
++ * Protocol Data Units (MVRPDUs), and frames from other link constrained
++ * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and
++ * Link Layer Discovery Protocol (LLDP), link-local frames. They are not
++ * forwarded by a Bridge. Permanently configured entries in the filtering
++ * database (FDB) ensure that such frames are discarded by the Forwarding
++ * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail:
++ *
++ * Each of the reserved MAC addresses specified in Table 8-1
++ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be
++ * permanently configured in the FDB in C-VLAN components and ERs.
++ *
++ * Each of the reserved MAC addresses specified in Table 8-2
++ * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently
++ * configured in the FDB in S-VLAN components.
++ *
++ * Each of the reserved MAC addresses specified in Table 8-3
++ * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in
++ * TPMR components.
++ *
++ * The FDB entries for reserved MAC addresses shall specify filtering for all
++ * Bridge Ports and all VIDs. Management shall not provide the capability to
++ * modify or remove entries for reserved MAC addresses.
++ *
++ * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of
++ * propagation of PDUs within a Bridged Network, as follows:
++ *
++ * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no
++ * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN)
++ * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward.
++ * PDUs transmitted using this destination address, or any other addresses
++ * that appear in Table 8-1, Table 8-2, and Table 8-3
++ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can
++ * therefore travel no further than those stations that can be reached via a
++ * single individual LAN from the originating station.
++ *
++ * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an
++ * address that no conformant S-VLAN component, C-VLAN component, or MAC
++ * Bridge can forward; however, this address is relayed by a TPMR component.
++ * PDUs using this destination address, or any of the other addresses that
++ * appear in both Table 8-1 and Table 8-2 but not in Table 8-3
++ * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by
++ * any TPMRs but will propagate no further than the nearest S-VLAN component,
++ * C-VLAN component, or MAC Bridge.
++ *
++ * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address
++ * that no conformant C-VLAN component, MAC Bridge can forward; however, it is
++ * relayed by TPMR components and S-VLAN components. PDUs using this
++ * destination address, or any of the other addresses that appear in Table 8-1
++ * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]),
++ * will be relayed by TPMR components and S-VLAN components but will propagate
++ * no further than the nearest C-VLAN component or MAC Bridge.
++ *
++ * Because the LLC Entity associated with each Bridge Port is provided via CPU
++ * port, we must not filter these frames but forward them to CPU port.
++ *
++ * In a Bridge, the transmission Port is majorly decided by ingress and egress
++ * rules, FDB, and spanning tree Port State functions of the Forwarding Process.
++ * For link-local frames, only CPU port should be designated as destination port
++ * in the FDB, and the other functions of the Forwarding Process must not
++ * interfere with the decision of the transmission Port. We call this process
++ * trapping frames to CPU port.
++ *
++ * Therefore, on the switch with CPU port architecture, link-local frames must
++ * be trapped to CPU port, and certain link-local frames received by a Port of a
++ * Bridge comprising a TPMR component or an S-VLAN component must be excluded
++ * from it.
++ *
++ * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port
++ * MAC Relay (TPMR) component as a TPMR component supports only a subset of the
++ * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port
++ * doesn't count) of this architecture will either function as a standard MAC
++ * Bridge or a standard VLAN Bridge.
++ *
++ * Therefore, a Bridge of this architecture can only comprise S-VLAN components,
++ * C-VLAN components, or MAC Bridge components. Since there's no TPMR component,
++ * we don't need to relay PDUs using the destination addresses specified on the
++ * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge
++ * section where they must be relayed by TPMR components.
++ *
++ * One option to trap link-local frames to CPU port is to add static FDB entries
++ * with CPU port designated as destination port. However, because that
++ * Independent VLAN Learning (IVL) is being used on every VID, each entry only
++ * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC
++ * Bridge component or a C-VLAN component, there would have to be 16 times 4096
++ * entries. This switch intellectual property can only hold a maximum of 2048
++ * entries. Using this option, there also isn't a mechanism to prevent
++ * link-local frames from being discarded when the spanning tree Port State of
++ * the reception Port is discarding.
++ *
++ * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4
++ * registers. Whilst this applies to every VID, it doesn't contain all of the
++ * reserved MAC addresses without affecting the remaining Standard Group MAC
++ * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the
++ * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination
++ * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF
++ * destination addresses which may be relayed by MAC Bridges or VLAN Bridges.
++ * The latter option provides better but not complete conformance.
++ *
++ * This switch intellectual property also does not provide a mechanism to trap
++ * link-local frames with specific destination addresses to CPU port by Bridge,
++ * to conform to the filtering rules for the distinct Bridge components.
++ *
++ * Therefore, regardless of the type of the Bridge component, link-local frames
++ * with these destination addresses will be trapped to CPU port:
++ *
++ * 01-80-C2-00-00-[00,01,02,03,0E]
++ *
++ * In a Bridge comprising a MAC Bridge component or a C-VLAN component:
++ *
++ * Link-local frames with these destination addresses won't be trapped to CPU
++ * port which won't conform to IEEE Std 802.1Q-2022:
++ *
++ * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F]
++ *
++ * In a Bridge comprising an S-VLAN component:
++ *
++ * Link-local frames with these destination addresses will be trapped to CPU
++ * port which won't conform to IEEE Std 802.1Q-2022:
++ *
++ * 01-80-C2-00-00-00
++ *
++ * Link-local frames with these destination addresses won't be trapped to CPU
++ * port which won't conform to IEEE Std 802.1Q-2022:
++ *
++ * 01-80-C2-00-00-[04,05,06,07,08,09,0A]
++ *
++ * To trap link-local frames to CPU port as conformant as this switch
++ * intellectual property can allow, link-local frames are made to be regarded as
++ * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual
++ * property only lets the frames regarded as BPDUs bypass the spanning tree Port
++ * State function of the Forwarding Process.
++ *
++ * The only remaining interference is the ingress rules. When the reception Port
++ * has no PVID assigned on software, VLAN-untagged frames won't be allowed in.
++ * There doesn't seem to be a mechanism on the switch intellectual property to
++ * have link-local frames bypass this function of the Forwarding Process.
+ */
+ static void
+ mt753x_trap_frames(struct mt7530_priv *priv)
+@@ -971,35 +1124,43 @@ mt753x_trap_frames(struct mt7530_priv *p
+ /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them
+ * VLAN-untagged.
+ */
+- mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK |
+- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
+- MT753X_BPDU_PORT_FW_MASK,
+- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ mt7530_rmw(priv, MT753X_BPC,
++ MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK |
++ MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK |
++ MT753X_BPDU_PORT_FW_MASK,
++ MT753X_PAE_BPDU_FR |
++ MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) |
++ MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_BPDU_CPU_ONLY);
+
+ /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+- mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK |
+- MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK |
+- MT753X_R01_PORT_FW_MASK,
+- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ mt7530_rmw(priv, MT753X_RGAC1,
++ MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK |
++ MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR |
++ MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK,
++ MT753X_R02_BPDU_FR |
++ MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) |
++ MT753X_R01_BPDU_FR |
++ MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_BPDU_CPU_ONLY);
+
+ /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress
+ * them VLAN-untagged.
+ */
+- mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK |
+- MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK |
+- MT753X_R03_PORT_FW_MASK,
+- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
+- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
+- MT753X_BPDU_CPU_ONLY);
++ mt7530_rmw(priv, MT753X_RGAC2,
++ MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK |
++ MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR |
++ MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK,
++ MT753X_R0E_BPDU_FR |
++ MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) |
++ MT753X_R03_BPDU_FR |
++ MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) |
++ MT753X_BPDU_CPU_ONLY);
+ }
+
+ static void
+--- a/drivers/net/dsa/mt7530.h
++++ b/drivers/net/dsa/mt7530.h
+@@ -65,6 +65,7 @@ enum mt753x_id {
+
+ /* Registers for BPDU and PAE frame control*/
+ #define MT753X_BPC 0x24
++#define MT753X_PAE_BPDU_FR BIT(25)
+ #define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22)
+ #define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x)
+ #define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16)
+@@ -75,20 +76,24 @@ enum mt753x_id {
+
+ /* Register for :01 and :02 MAC DA frame control */
+ #define MT753X_RGAC1 0x28
++#define MT753X_R02_BPDU_FR BIT(25)
+ #define MT753X_R02_EG_TAG_MASK GENMASK(24, 22)
+ #define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x)
+ #define MT753X_R02_PORT_FW_MASK GENMASK(18, 16)
+ #define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x)
++#define MT753X_R01_BPDU_FR BIT(9)
+ #define MT753X_R01_EG_TAG_MASK GENMASK(8, 6)
+ #define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x)
+ #define MT753X_R01_PORT_FW_MASK GENMASK(2, 0)
+
+ /* Register for :03 and :0E MAC DA frame control */
+ #define MT753X_RGAC2 0x2c
++#define MT753X_R0E_BPDU_FR BIT(25)
+ #define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22)
+ #define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x)
+ #define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16)
+ #define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x)
++#define MT753X_R03_BPDU_FR BIT(9)
+ #define MT753X_R03_EG_TAG_MASK GENMASK(8, 6)
+ #define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x)
+ #define MT753X_R03_PORT_FW_MASK GENMASK(2, 0)
projects / openwrt / staging / stintel.git / commitdiff