--- /dev/null
+From f125e2d4339dda6937865f975470b29c84714c9b Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Mon, 6 Jan 2020 14:57:15 +0100
+Subject: [PATCH] ARM: qcom: Add support for IPQ40xx
+
+Add support for the Qualcomm IPQ40xx SoC in Kconfig.
+Also add its appropriate textofs.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
+Tested-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Signed-off-by: Arnd Bergmann <arnd@arndb.de>
+---
+ arch/arm/Makefile | 1 +
+ arch/arm/mach-qcom/Kconfig | 5 +++++
+ 2 files changed, 6 insertions(+)
+
+--- a/arch/arm/Makefile
++++ b/arch/arm/Makefile
+@@ -152,6 +152,7 @@ textofs-$(CONFIG_PM_H1940) := 0x001
+ ifeq ($(CONFIG_ARCH_SA1100),y)
+ textofs-$(CONFIG_SA1111) := 0x00208000
+ endif
++textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
+ textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
+ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+ textofs-$(CONFIG_ARCH_MESON) := 0x00208000
+--- a/arch/arm/mach-qcom/Kconfig
++++ b/arch/arm/mach-qcom/Kconfig
+@@ -12,6 +12,11 @@ menuconfig ARCH_QCOM
+
+ if ARCH_QCOM
+
++config ARCH_IPQ40XX
++ bool "Enable support for IPQ40XX"
++ select CLKSRC_QCOM
++ select HAVE_ARM_ARCH_TIMER
++
+ config ARCH_MSM8X60
+ bool "Enable support for MSM8X60"
+ select CLKSRC_QCOM
--- /dev/null
+From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Wed, 22 Jan 2020 12:44:14 +0100
+Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17
+ 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Sun, 12 Jan
+ 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO
+ driver
+
+This introduces the IPQ4019 VQMMC LDO driver needed for
+the SD/EMMC driver I/O level operation.
+This will enable introducing SD/EMMC support for the built-in controller.
+
+Signed-off-by: Mantas Pucka <mantas@8devices.com>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr
+Signed-off-by: Mark Brown <broonie@kernel.org>
+---
+ drivers/regulator/Kconfig | 7 ++
+ drivers/regulator/Makefile | 1 +
+ drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++
+ 3 files changed, 109 insertions(+)
+ create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c
+
+--- a/drivers/regulator/Kconfig
++++ b/drivers/regulator/Kconfig
+@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS
+ This driver provides support for voltage regulators available
+ on the ARM Ltd's Versatile Express platform.
+
++config REGULATOR_VQMMC_IPQ4019
++ tristate "IPQ4019 VQMMC SD LDO regulator support"
++ depends on ARCH_QCOM
++ help
++ This driver provides support for the VQMMC LDO I/0
++ voltage regulator of the IPQ4019 SD/EMMC controller.
++
+ config REGULATOR_WM831X
+ tristate "Wolfson Microelectronics WM831x PMIC regulators"
+ depends on MFD_WM831X
+--- a/drivers/regulator/Makefile
++++ b/drivers/regulator/Makefile
+@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r
+ obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
+ obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
+ obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
++obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o
+ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
+ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
+ obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
+--- /dev/null
++++ b/drivers/regulator/vqmmc-ipq4019-regulator.c
+@@ -0,0 +1,101 @@
++// SPDX-License-Identifier: GPL-2.0+
++//
++// Copyright (c) 2019 Mantas Pucka <mantas@8devices.com>
++// Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr>
++//
++// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator
++
++#include <linux/io.h>
++#include <linux/module.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++#include <linux/regmap.h>
++#include <linux/regulator/driver.h>
++#include <linux/regulator/machine.h>
++#include <linux/regulator/of_regulator.h>
++
++static const unsigned int ipq4019_vmmc_voltages[] = {
++ 1500000, 1800000, 2500000, 3000000,
++};
++
++static const struct regulator_ops ipq4019_regulator_voltage_ops = {
++ .list_voltage = regulator_list_voltage_table,
++ .map_voltage = regulator_map_voltage_ascend,
++ .get_voltage_sel = regulator_get_voltage_sel_regmap,
++ .set_voltage_sel = regulator_set_voltage_sel_regmap,
++};
++
++static const struct regulator_desc vmmc_regulator = {
++ .name = "vmmcq",
++ .ops = &ipq4019_regulator_voltage_ops,
++ .type = REGULATOR_VOLTAGE,
++ .owner = THIS_MODULE,
++ .volt_table = ipq4019_vmmc_voltages,
++ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages),
++ .vsel_reg = 0,
++ .vsel_mask = 0x3,
++};
++
++static const struct regmap_config ipq4019_vmmcq_regmap_config = {
++ .reg_bits = 32,
++ .reg_stride = 4,
++ .val_bits = 32,
++};
++
++static int ipq4019_regulator_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct regulator_init_data *init_data;
++ struct regulator_config cfg = {};
++ struct regulator_dev *rdev;
++ struct resource *res;
++ struct regmap *rmap;
++ void __iomem *base;
++
++ init_data = of_get_regulator_init_data(dev, dev->of_node,
++ &vmmc_regulator);
++ if (!init_data)
++ return -EINVAL;
++
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ base = devm_ioremap_resource(dev, res);
++ if (IS_ERR(base))
++ return PTR_ERR(base);
++
++ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config);
++ if (IS_ERR(rmap))
++ return PTR_ERR(rmap);
++
++ cfg.dev = dev;
++ cfg.init_data = init_data;
++ cfg.of_node = dev->of_node;
++ cfg.regmap = rmap;
++
++ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg);
++ if (IS_ERR(rdev)) {
++ dev_err(dev, "Failed to register regulator: %ld\n",
++ PTR_ERR(rdev));
++ return PTR_ERR(rdev);
++ }
++ platform_set_drvdata(pdev, rdev);
++
++ return 0;
++}
++
++static const struct of_device_id regulator_ipq4019_of_match[] = {
++ { .compatible = "qcom,vqmmc-ipq4019-regulator", },
++ {},
++};
++
++static struct platform_driver ipq4019_regulator_driver = {
++ .probe = ipq4019_regulator_probe,
++ .driver = {
++ .name = "vqmmc-ipq4019-regulator",
++ .of_match_table = of_match_ptr(regulator_ipq4019_of_match),
++ },
++};
++module_platform_driver(ipq4019_regulator_driver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>");
++MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator");
--- /dev/null
+From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001
+From: Robert Marko <robimarko@gmail.com>
+Date: Thu, 15 Aug 2019 19:28:23 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node
+
+IPQ4019 has a built in SD/eMMC controller which is supported by the
+SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding.
+So lets add the appropriate node for it.
+
+Signed-off-by: Robert Marko <robimarko@gmail.com>
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -206,6 +206,18 @@
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
++ sdhci: sdhci@7824900 {
++ compatible = "qcom,sdhci-msm-v4";
++ reg = <0x7824900 0x11c>, <0x7824000 0x800>;
++ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "hc_irq", "pwr_irq";
++ bus-width = <8>;
++ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
++ <&gcc GCC_DCD_XO_CLK>;
++ clock-names = "core", "iface", "xo";
++ status = "disabled";
++ };
++
+ blsp_dma: dma@7884000 {
+ compatible = "qcom,bam-v1.7.0";
+ reg = <0x07884000 0x23000>;
--- /dev/null
+From 5e4548922009870a38bcf1d887317676d4e08f54 Mon Sep 17 00:00:00 2001
+From: Damir Franusic <damir.franusic@sartura.hr>
+Date: Thu, 21 Nov 2019 16:29:02 +0100
+Subject: [PATCH] ARM: dts: qcom: Add nodes for SMP boot in IPQ40xx
+
+Add missing nodes and properties to enable SMP
+support on IPQ40xx devices.
+
+Booting without "saw_l2" node:
+
+[ 0.001400] CPU: Testing write buffer coherency: ok
+[ 0.001856] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+[ 0.060163] Setting up static identity map for 0x80300000 - 0x80300060
+[ 0.080140] rcu: Hierarchical SRCU implementation.
+[ 0.120258] smp: Bringing up secondary CPUs ...
+[ 0.200540] CPU1: failed to boot: -19
+[ 0.280689] CPU2: failed to boot: -19
+[ 0.360874] CPU3: failed to boot: -19
+[ 0.360966] smp: Brought up 1 node, 1 CPU
+[ 0.360979] SMP: Total of 1 processors activated (96.00 BogoMIPS).
+[ 0.360988] CPU: All CPU(s) started in SVC mode.
+
+Then, booting with "saw_l2" node present (this patch applied):
+
+[ 0.001450] CPU: Testing write buffer coherency: ok
+[ 0.001904] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
+[ 0.060161] Setting up static identity map for 0x80300000 - 0x80300060
+[ 0.080137] rcu: Hierarchical SRCU implementation.
+[ 0.120252] smp: Bringing up secondary CPUs ...
+[ 0.200958] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
+[ 0.281091] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
+[ 0.361264] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
+[ 0.361430] smp: Brought up 1 node, 4 CPUs
+[ 0.361460] SMP: Total of 4 processors activated (384.00 BogoMIPS).
+[ 0.361469] CPU: All CPU(s) started in SVC mode.
+
+Signed-off-by: Damir Franusic <damir.franusic@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Cc: Robert Marko <robert.marko@sartura.hr>
+Cc: Andy Gross <agross@kernel.org>
+Cc: Rob Herring <robh+dt@kernel.org>
+Cc: linux-arm-msm@vger.kernel.org
+Link: https://lore.kernel.org/r/20191121152902.21394-1-damir.franusic@gmail.com
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -102,6 +102,7 @@
+ L2: l2-cache {
+ compatible = "cache";
+ cache-level = <2>;
++ qcom,saw = <&saw_l2>;
+ };
+ };
+
+@@ -353,6 +354,12 @@
+ regulator;
+ };
+
++ saw_l2: regulator@b012000 {
++ compatible = "qcom,saw2";
++ reg = <0xb012000 0x1000>;
++ regulator;
++ };
++
+ blsp1_uart1: serial@78af000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x78af000 0x200>;
--- /dev/null
+From 8b99dc0922618062a1589ebd74df6108b4f9ac22 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Wed, 8 Jan 2020 13:54:55 +0100
+Subject: [PATCH] ARM: dts: qcom: add gpio-ranges property
+
+This patch adds the gpio-ranges property to almost all of
+the Qualcomm ARM platforms that utilize the pinctrl-msm
+framework.
+
+The gpio-ranges property is part of the gpiolib subsystem.
+As a result, the binding text is available in section
+"2.1 gpio- and pin-controller interaction" of
+Documentation/devicetree/bindings/gpio/gpio.txt
+
+For more information please see the patch titled:
+"pinctrl: msm: fix gpio-hog related boot issues" from
+this series.
+
+Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
+Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
+Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019]
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+---
+ arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
+ arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
+ arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
+ arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
+ arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
+ arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
+ arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
+ 8 files changed, 8 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
+@@ -350,6 +350,7 @@
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
++ gpio-ranges = <&tlmm_pinmux 0 0 90>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
++++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
+@@ -401,6 +401,7 @@
+ compatible = "qcom,apq8084-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
++ gpio-ranges = <&tlmm 0 0 147>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -201,6 +201,7 @@
+ compatible = "qcom,ipq4019-pinctrl";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
++ gpio-ranges = <&tlmm 0 0 100>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -119,6 +119,7 @@
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
++ gpio-ranges = <&qcom_pinmux 0 0 69>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+--- a/arch/arm/boot/dts/qcom-mdm9615.dtsi
++++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi
+@@ -128,6 +128,7 @@
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,mdm9615-pinctrl";
+ gpio-controller;
++ gpio-ranges = <&msmgpio 0 0 88>;
+ #gpio-cells = <2>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
++++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
+@@ -115,6 +115,7 @@
+ reg = <0x800000 0x4000>;
+
+ gpio-controller;
++ gpio-ranges = <&tlmm 0 0 173>;
+ #gpio-cells = <2>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
++++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
+@@ -107,6 +107,7 @@
+ msmgpio: pinctrl@800000 {
+ compatible = "qcom,msm8960-pinctrl";
+ gpio-controller;
++ gpio-ranges = <&msmgpio 0 0 152>;
+ #gpio-cells = <2>;
+ interrupts = <0 16 0x4>;
+ interrupt-controller;
+--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
++++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
+@@ -707,6 +707,7 @@
+ compatible = "qcom,msm8974-pinctrl";
+ reg = <0xfd510000 0x4000>;
+ gpio-controller;
++ gpio-ranges = <&msmgpio 0 0 146>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
--- /dev/null
+From 8acc36189dcaf4487d8c6ba7445948f39b1d248a Mon Sep 17 00:00:00 2001
+From: Abhishek Sahu <absahu@codeaurora.org>
+Date: Fri, 3 Apr 2020 13:40:40 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: fix high resolution timer
+
+Cherry-picked from CAF QSDK repo.
+Original commit message:
+The kernel is failing in switching the timer for high resolution
+mode and clock source operates in 10ms resolution. The always-on
+property needs to be given for timer device tree node to make
+clock source working in 1ns resolution.
+
+Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
+Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Tested-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Link: https://lore.kernel.org/r/20200403114040.349787-1-robert.marko@sartura.hr
+Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -166,6 +166,7 @@
+ <1 4 0xf08>,
+ <1 1 0xf08>;
+ clock-frequency = <48000000>;
++ always-on;
+ };
+
+ soc {
--- /dev/null
+From 9c8c0f70ec6fdac2398632c723c48277be09b7c0 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Thu, 30 Apr 2020 11:07:07 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: add MDIO node
+
+This patch adds the necessary MDIO interface node
+to the Qualcomm IPQ4019 DTSI.
+
+Built-in QCA8337N switch is managed using it,
+and since we have a driver for it lets add it.
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -577,5 +577,33 @@
+ "legacy";
+ status = "disabled";
+ };
++
++ mdio: mdio@90000 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "qcom,ipq4019-mdio";
++ reg = <0x90000 0x64>;
++ status = "disabled";
++
++ ethphy0: ethernet-phy@0 {
++ reg = <0>;
++ };
++
++ ethphy1: ethernet-phy@1 {
++ reg = <1>;
++ };
++
++ ethphy2: ethernet-phy@2 {
++ reg = <2>;
++ };
++
++ ethphy3: ethernet-phy@3 {
++ reg = <3>;
++ };
++
++ ethphy4: ethernet-phy@4 {
++ reg = <4>;
++ };
++ };
+ };
+ };
--- /dev/null
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag
+
+Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by
+the qce driver, since they are all hardware accelerated, accessible
+through a kernel driver only, and not available directly to userspace.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+
+--- a/drivers/crypto/qce/ablkcipher.c
++++ b/drivers/crypto/qce/ablkcipher.c
+@@ -380,7 +380,7 @@ static int qce_ablkcipher_register_one(c
+
+ alg->cra_priority = 300;
+ alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
+- CRYPTO_ALG_NEED_FALLBACK;
++ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
+ alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
+ alg->cra_alignmask = 0;
+ alg->cra_type = &crypto_ablkcipher_type;
+--- a/drivers/crypto/qce/sha.c
++++ b/drivers/crypto/qce/sha.c
+@@ -495,7 +495,7 @@ static int qce_ahash_register_one(const
+ base = &alg->halg.base;
+ base->cra_blocksize = def->blocksize;
+ base->cra_priority = 300;
+- base->cra_flags = CRYPTO_ALG_ASYNC;
++ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY;
+ base->cra_ctxsize = sizeof(struct qce_sha_ctx);
+ base->cra_alignmask = 0;
+ base->cra_module = THIS_MODULE;
--- /dev/null
+From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001
+From: Ard Biesheuvel <ardb@kernel.org>
+Date: Tue, 5 Nov 2019 14:28:17 +0100
+Subject: [PATCH] crypto: qce - switch to skcipher API
+
+Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
+dated 20 august 2015 introduced the new skcipher API which is supposed to
+replace both blkcipher and ablkcipher. While all consumers of the API have
+been converted long ago, some producers of the ablkcipher remain, forcing
+us to keep the ablkcipher support routines alive, along with the matching
+code to expose [a]blkciphers via the skcipher API.
+
+So switch this driver to the skcipher API, allowing us to finally drop the
+blkcipher code in the near future.
+
+Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
+Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
+Backported-to-4.19-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+
+--- a/drivers/crypto/qce/Makefile
++++ b/drivers/crypto/qce/Makefile
+@@ -4,4 +4,4 @@ qcrypto-objs := core.o \
+ common.o \
+ dma.o \
+ sha.o \
+- ablkcipher.o
++ skcipher.o
+--- a/drivers/crypto/qce/cipher.h
++++ b/drivers/crypto/qce/cipher.h
+@@ -45,12 +45,12 @@ struct qce_cipher_reqctx {
+ unsigned int cryptlen;
+ };
+
+-static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm)
++static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm)
+ {
+- struct crypto_alg *alg = tfm->__crt_alg;
+- return container_of(alg, struct qce_alg_template, alg.crypto);
++ struct skcipher_alg *alg = crypto_skcipher_alg(tfm);
++ return container_of(alg, struct qce_alg_template, alg.skcipher);
+ }
+
+-extern const struct qce_algo_ops ablkcipher_ops;
++extern const struct qce_algo_ops skcipher_ops;
+
+ #endif /* _CIPHER_H_ */
+--- a/drivers/crypto/qce/common.c
++++ b/drivers/crypto/qce/common.c
+@@ -304,13 +304,13 @@ go_proc:
+ return 0;
+ }
+
+-static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req,
++static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
+ u32 totallen, u32 offset)
+ {
+- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
+- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
++ struct skcipher_request *req = skcipher_request_cast(async_req);
++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
+ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm);
+- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
+ struct qce_device *qce = tmpl->qce;
+ __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0};
+ __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0};
+@@ -389,8 +389,8 @@ int qce_start(struct crypto_async_reques
+ u32 offset)
+ {
+ switch (type) {
+- case CRYPTO_ALG_TYPE_ABLKCIPHER:
+- return qce_setup_regs_ablkcipher(async_req, totallen, offset);
++ case CRYPTO_ALG_TYPE_SKCIPHER:
++ return qce_setup_regs_skcipher(async_req, totallen, offset);
+ case CRYPTO_ALG_TYPE_AHASH:
+ return qce_setup_regs_ahash(async_req, totallen, offset);
+ default:
+--- a/drivers/crypto/qce/common.h
++++ b/drivers/crypto/qce/common.h
+@@ -10,6 +10,7 @@
+ #include <linux/types.h>
+ #include <crypto/aes.h>
+ #include <crypto/hash.h>
++#include <crypto/internal/skcipher.h>
+
+ /* key size in bytes */
+ #define QCE_SHA_HMAC_KEY_SIZE 64
+@@ -79,7 +80,7 @@ struct qce_alg_template {
+ unsigned long alg_flags;
+ const u32 *std_iv;
+ union {
+- struct crypto_alg crypto;
++ struct skcipher_alg skcipher;
+ struct ahash_alg ahash;
+ } alg;
+ struct qce_device *qce;
+--- a/drivers/crypto/qce/core.c
++++ b/drivers/crypto/qce/core.c
+@@ -22,7 +22,7 @@
+ #define QCE_QUEUE_LENGTH 1
+
+ static const struct qce_algo_ops *qce_ops[] = {
+- &ablkcipher_ops,
++ &skcipher_ops,
+ &ahash_ops,
+ };
+
+--- a/drivers/crypto/qce/ablkcipher.c
++++ /dev/null
+@@ -1,440 +0,0 @@
+-// SPDX-License-Identifier: GPL-2.0-only
+-/*
+- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
+- */
+-
+-#include <linux/device.h>
+-#include <linux/interrupt.h>
+-#include <linux/types.h>
+-#include <crypto/aes.h>
+-#include <crypto/internal/des.h>
+-#include <crypto/internal/skcipher.h>
+-
+-#include "cipher.h"
+-
+-static LIST_HEAD(ablkcipher_algs);
+-
+-static void qce_ablkcipher_done(void *data)
+-{
+- struct crypto_async_request *async_req = data;
+- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
+- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
+- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
+- struct qce_device *qce = tmpl->qce;
+- enum dma_data_direction dir_src, dir_dst;
+- u32 status;
+- int error;
+- bool diff_dst;
+-
+- diff_dst = (req->src != req->dst) ? true : false;
+- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
+- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
+-
+- error = qce_dma_terminate_all(&qce->dma);
+- if (error)
+- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n",
+- error);
+-
+- if (diff_dst)
+- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
+- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+-
+- sg_free_table(&rctx->dst_tbl);
+-
+- error = qce_check_status(qce, &status);
+- if (error < 0)
+- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status);
+-
+- qce->async_req_done(tmpl->qce, error);
+-}
+-
+-static int
+-qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req)
+-{
+- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
+- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
+- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
+- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
+- struct qce_device *qce = tmpl->qce;
+- enum dma_data_direction dir_src, dir_dst;
+- struct scatterlist *sg;
+- bool diff_dst;
+- gfp_t gfp;
+- int ret;
+-
+- rctx->iv = req->info;
+- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher);
+- rctx->cryptlen = req->nbytes;
+-
+- diff_dst = (req->src != req->dst) ? true : false;
+- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
+- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
+-
+- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes);
+- if (diff_dst)
+- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes);
+- else
+- rctx->dst_nents = rctx->src_nents;
+- if (rctx->src_nents < 0) {
+- dev_err(qce->dev, "Invalid numbers of src SG.\n");
+- return rctx->src_nents;
+- }
+- if (rctx->dst_nents < 0) {
+- dev_err(qce->dev, "Invalid numbers of dst SG.\n");
+- return -rctx->dst_nents;
+- }
+-
+- rctx->dst_nents += 1;
+-
+- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
+- GFP_KERNEL : GFP_ATOMIC;
+-
+- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
+- if (ret)
+- return ret;
+-
+- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
+-
+- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
+- if (IS_ERR(sg)) {
+- ret = PTR_ERR(sg);
+- goto error_free;
+- }
+-
+- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
+- if (IS_ERR(sg)) {
+- ret = PTR_ERR(sg);
+- goto error_free;
+- }
+-
+- sg_mark_end(sg);
+- rctx->dst_sg = rctx->dst_tbl.sgl;
+-
+- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+- if (ret < 0)
+- goto error_free;
+-
+- if (diff_dst) {
+- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
+- if (ret < 0)
+- goto error_unmap_dst;
+- rctx->src_sg = req->src;
+- } else {
+- rctx->src_sg = rctx->dst_sg;
+- }
+-
+- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
+- rctx->dst_sg, rctx->dst_nents,
+- qce_ablkcipher_done, async_req);
+- if (ret)
+- goto error_unmap_src;
+-
+- qce_dma_issue_pending(&qce->dma);
+-
+- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0);
+- if (ret)
+- goto error_terminate;
+-
+- return 0;
+-
+-error_terminate:
+- qce_dma_terminate_all(&qce->dma);
+-error_unmap_src:
+- if (diff_dst)
+- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
+-error_unmap_dst:
+- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
+-error_free:
+- sg_free_table(&rctx->dst_tbl);
+- return ret;
+-}
+-
+-static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
+- unsigned int keylen)
+-{
+- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk);
+- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
+- int ret;
+-
+- if (!key || !keylen)
+- return -EINVAL;
+-
+- switch (keylen) {
+- case AES_KEYSIZE_128:
+- case AES_KEYSIZE_256:
+- break;
+- default:
+- goto fallback;
+- }
+-
+- ctx->enc_keylen = keylen;
+- memcpy(ctx->enc_key, key, keylen);
+- return 0;
+-fallback:
+- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
+- if (!ret)
+- ctx->enc_keylen = keylen;
+- return ret;
+-}
+-
+-static int qce_des_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
+- unsigned int keylen)
+-{
+- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk);
+- int err;
+-
+- err = verify_ablkcipher_des_key(ablk, key);
+- if (err)
+- return err;
+-
+- ctx->enc_keylen = keylen;
+- memcpy(ctx->enc_key, key, keylen);
+- return 0;
+-}
+-
+-static int qce_des3_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
+- unsigned int keylen)
+-{
+- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk);
+- int err;
+-
+- err = verify_ablkcipher_des3_key(ablk, key);
+- if (err)
+- return err;
+-
+- ctx->enc_keylen = keylen;
+- memcpy(ctx->enc_key, key, keylen);
+- return 0;
+-}
+-
+-static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt)
+-{
+- struct crypto_tfm *tfm =
+- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req));
+- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
+- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
+- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
+- int ret;
+-
+- rctx->flags = tmpl->alg_flags;
+- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
+-
+- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
+- ctx->enc_keylen != AES_KEYSIZE_256) {
+- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
+-
+- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
+- skcipher_request_set_callback(subreq, req->base.flags,
+- NULL, NULL);
+- skcipher_request_set_crypt(subreq, req->src, req->dst,
+- req->nbytes, req->info);
+- ret = encrypt ? crypto_skcipher_encrypt(subreq) :
+- crypto_skcipher_decrypt(subreq);
+- skcipher_request_zero(subreq);
+- return ret;
+- }
+-
+- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
+-}
+-
+-static int qce_ablkcipher_encrypt(struct ablkcipher_request *req)
+-{
+- return qce_ablkcipher_crypt(req, 1);
+-}
+-
+-static int qce_ablkcipher_decrypt(struct ablkcipher_request *req)
+-{
+- return qce_ablkcipher_crypt(req, 0);
+-}
+-
+-static int qce_ablkcipher_init(struct crypto_tfm *tfm)
+-{
+- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
+-
+- memset(ctx, 0, sizeof(*ctx));
+- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx);
+-
+- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(tfm),
+- 0, CRYPTO_ALG_NEED_FALLBACK);
+- return PTR_ERR_OR_ZERO(ctx->fallback);
+-}
+-
+-static void qce_ablkcipher_exit(struct crypto_tfm *tfm)
+-{
+- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
+-
+- crypto_free_sync_skcipher(ctx->fallback);
+-}
+-
+-struct qce_ablkcipher_def {
+- unsigned long flags;
+- const char *name;
+- const char *drv_name;
+- unsigned int blocksize;
+- unsigned int ivsize;
+- unsigned int min_keysize;
+- unsigned int max_keysize;
+-};
+-
+-static const struct qce_ablkcipher_def ablkcipher_def[] = {
+- {
+- .flags = QCE_ALG_AES | QCE_MODE_ECB,
+- .name = "ecb(aes)",
+- .drv_name = "ecb-aes-qce",
+- .blocksize = AES_BLOCK_SIZE,
+- .ivsize = AES_BLOCK_SIZE,
+- .min_keysize = AES_MIN_KEY_SIZE,
+- .max_keysize = AES_MAX_KEY_SIZE,
+- },
+- {
+- .flags = QCE_ALG_AES | QCE_MODE_CBC,
+- .name = "cbc(aes)",
+- .drv_name = "cbc-aes-qce",
+- .blocksize = AES_BLOCK_SIZE,
+- .ivsize = AES_BLOCK_SIZE,
+- .min_keysize = AES_MIN_KEY_SIZE,
+- .max_keysize = AES_MAX_KEY_SIZE,
+- },
+- {
+- .flags = QCE_ALG_AES | QCE_MODE_CTR,
+- .name = "ctr(aes)",
+- .drv_name = "ctr-aes-qce",
+- .blocksize = AES_BLOCK_SIZE,
+- .ivsize = AES_BLOCK_SIZE,
+- .min_keysize = AES_MIN_KEY_SIZE,
+- .max_keysize = AES_MAX_KEY_SIZE,
+- },
+- {
+- .flags = QCE_ALG_AES | QCE_MODE_XTS,
+- .name = "xts(aes)",
+- .drv_name = "xts-aes-qce",
+- .blocksize = AES_BLOCK_SIZE,
+- .ivsize = AES_BLOCK_SIZE,
+- .min_keysize = AES_MIN_KEY_SIZE,
+- .max_keysize = AES_MAX_KEY_SIZE,
+- },
+- {
+- .flags = QCE_ALG_DES | QCE_MODE_ECB,
+- .name = "ecb(des)",
+- .drv_name = "ecb-des-qce",
+- .blocksize = DES_BLOCK_SIZE,
+- .ivsize = 0,
+- .min_keysize = DES_KEY_SIZE,
+- .max_keysize = DES_KEY_SIZE,
+- },
+- {
+- .flags = QCE_ALG_DES | QCE_MODE_CBC,
+- .name = "cbc(des)",
+- .drv_name = "cbc-des-qce",
+- .blocksize = DES_BLOCK_SIZE,
+- .ivsize = DES_BLOCK_SIZE,
+- .min_keysize = DES_KEY_SIZE,
+- .max_keysize = DES_KEY_SIZE,
+- },
+- {
+- .flags = QCE_ALG_3DES | QCE_MODE_ECB,
+- .name = "ecb(des3_ede)",
+- .drv_name = "ecb-3des-qce",
+- .blocksize = DES3_EDE_BLOCK_SIZE,
+- .ivsize = 0,
+- .min_keysize = DES3_EDE_KEY_SIZE,
+- .max_keysize = DES3_EDE_KEY_SIZE,
+- },
+- {
+- .flags = QCE_ALG_3DES | QCE_MODE_CBC,
+- .name = "cbc(des3_ede)",
+- .drv_name = "cbc-3des-qce",
+- .blocksize = DES3_EDE_BLOCK_SIZE,
+- .ivsize = DES3_EDE_BLOCK_SIZE,
+- .min_keysize = DES3_EDE_KEY_SIZE,
+- .max_keysize = DES3_EDE_KEY_SIZE,
+- },
+-};
+-
+-static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def,
+- struct qce_device *qce)
+-{
+- struct qce_alg_template *tmpl;
+- struct crypto_alg *alg;
+- int ret;
+-
+- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
+- if (!tmpl)
+- return -ENOMEM;
+-
+- alg = &tmpl->alg.crypto;
+-
+- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
+- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
+- def->drv_name);
+-
+- alg->cra_blocksize = def->blocksize;
+- alg->cra_ablkcipher.ivsize = def->ivsize;
+- alg->cra_ablkcipher.min_keysize = def->min_keysize;
+- alg->cra_ablkcipher.max_keysize = def->max_keysize;
+- alg->cra_ablkcipher.setkey = IS_3DES(def->flags) ? qce_des3_setkey :
+- IS_DES(def->flags) ? qce_des_setkey :
+- qce_ablkcipher_setkey;
+- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt;
+- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt;
+-
+- alg->cra_priority = 300;
+- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
+- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
+- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
+- alg->cra_alignmask = 0;
+- alg->cra_type = &crypto_ablkcipher_type;
+- alg->cra_module = THIS_MODULE;
+- alg->cra_init = qce_ablkcipher_init;
+- alg->cra_exit = qce_ablkcipher_exit;
+-
+- INIT_LIST_HEAD(&tmpl->entry);
+- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER;
+- tmpl->alg_flags = def->flags;
+- tmpl->qce = qce;
+-
+- ret = crypto_register_alg(alg);
+- if (ret) {
+- kfree(tmpl);
+- dev_err(qce->dev, "%s registration failed\n", alg->cra_name);
+- return ret;
+- }
+-
+- list_add_tail(&tmpl->entry, &ablkcipher_algs);
+- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name);
+- return 0;
+-}
+-
+-static void qce_ablkcipher_unregister(struct qce_device *qce)
+-{
+- struct qce_alg_template *tmpl, *n;
+-
+- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) {
+- crypto_unregister_alg(&tmpl->alg.crypto);
+- list_del(&tmpl->entry);
+- kfree(tmpl);
+- }
+-}
+-
+-static int qce_ablkcipher_register(struct qce_device *qce)
+-{
+- int ret, i;
+-
+- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) {
+- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce);
+- if (ret)
+- goto err;
+- }
+-
+- return 0;
+-err:
+- qce_ablkcipher_unregister(qce);
+- return ret;
+-}
+-
+-const struct qce_algo_ops ablkcipher_ops = {
+- .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
+- .register_algs = qce_ablkcipher_register,
+- .unregister_algs = qce_ablkcipher_unregister,
+- .async_req_handle = qce_ablkcipher_async_req_handle,
+-};
+--- /dev/null
++++ b/drivers/crypto/qce/skcipher.c
+@@ -0,0 +1,440 @@
++// SPDX-License-Identifier: GPL-2.0-only
++/*
++ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
++ */
++
++#include <linux/device.h>
++#include <linux/interrupt.h>
++#include <linux/types.h>
++#include <crypto/aes.h>
++#include <crypto/internal/des.h>
++#include <crypto/internal/skcipher.h>
++
++#include "cipher.h"
++
++static LIST_HEAD(skcipher_algs);
++
++static void qce_skcipher_done(void *data)
++{
++ struct crypto_async_request *async_req = data;
++ struct skcipher_request *req = skcipher_request_cast(async_req);
++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
++ struct qce_device *qce = tmpl->qce;
++ enum dma_data_direction dir_src, dir_dst;
++ u32 status;
++ int error;
++ bool diff_dst;
++
++ diff_dst = (req->src != req->dst) ? true : false;
++ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
++ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
++
++ error = qce_dma_terminate_all(&qce->dma);
++ if (error)
++ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n",
++ error);
++
++ if (diff_dst)
++ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
++ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
++
++ sg_free_table(&rctx->dst_tbl);
++
++ error = qce_check_status(qce, &status);
++ if (error < 0)
++ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
++
++ qce->async_req_done(tmpl->qce, error);
++}
++
++static int
++qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
++{
++ struct skcipher_request *req = skcipher_request_cast(async_req);
++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
++ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req);
++ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
++ struct qce_device *qce = tmpl->qce;
++ enum dma_data_direction dir_src, dir_dst;
++ struct scatterlist *sg;
++ bool diff_dst;
++ gfp_t gfp;
++ int ret;
++
++ rctx->iv = req->iv;
++ rctx->ivsize = crypto_skcipher_ivsize(skcipher);
++ rctx->cryptlen = req->cryptlen;
++
++ diff_dst = (req->src != req->dst) ? true : false;
++ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
++ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
++
++ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen);
++ if (diff_dst)
++ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen);
++ else
++ rctx->dst_nents = rctx->src_nents;
++ if (rctx->src_nents < 0) {
++ dev_err(qce->dev, "Invalid numbers of src SG.\n");
++ return rctx->src_nents;
++ }
++ if (rctx->dst_nents < 0) {
++ dev_err(qce->dev, "Invalid numbers of dst SG.\n");
++ return -rctx->dst_nents;
++ }
++
++ rctx->dst_nents += 1;
++
++ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
++ GFP_KERNEL : GFP_ATOMIC;
++
++ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
++ if (ret)
++ return ret;
++
++ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
++
++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
++ if (IS_ERR(sg)) {
++ ret = PTR_ERR(sg);
++ goto error_free;
++ }
++
++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
++ if (IS_ERR(sg)) {
++ ret = PTR_ERR(sg);
++ goto error_free;
++ }
++
++ sg_mark_end(sg);
++ rctx->dst_sg = rctx->dst_tbl.sgl;
++
++ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
++ if (ret < 0)
++ goto error_free;
++
++ if (diff_dst) {
++ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
++ if (ret < 0)
++ goto error_unmap_dst;
++ rctx->src_sg = req->src;
++ } else {
++ rctx->src_sg = rctx->dst_sg;
++ }
++
++ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
++ rctx->dst_sg, rctx->dst_nents,
++ qce_skcipher_done, async_req);
++ if (ret)
++ goto error_unmap_src;
++
++ qce_dma_issue_pending(&qce->dma);
++
++ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0);
++ if (ret)
++ goto error_terminate;
++
++ return 0;
++
++error_terminate:
++ qce_dma_terminate_all(&qce->dma);
++error_unmap_src:
++ if (diff_dst)
++ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
++error_unmap_dst:
++ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
++error_free:
++ sg_free_table(&rctx->dst_tbl);
++ return ret;
++}
++
++static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key,
++ unsigned int keylen)
++{
++ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk);
++ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
++ int ret;
++
++ if (!key || !keylen)
++ return -EINVAL;
++
++ switch (keylen) {
++ case AES_KEYSIZE_128:
++ case AES_KEYSIZE_256:
++ break;
++ default:
++ goto fallback;
++ }
++
++ ctx->enc_keylen = keylen;
++ memcpy(ctx->enc_key, key, keylen);
++ return 0;
++fallback:
++ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
++ if (!ret)
++ ctx->enc_keylen = keylen;
++ return ret;
++}
++
++static int qce_des_setkey(struct crypto_skcipher *ablk, const u8 *key,
++ unsigned int keylen)
++{
++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk);
++ int err;
++
++ err = verify_skcipher_des_key(ablk, key);
++ if (err)
++ return err;
++
++ ctx->enc_keylen = keylen;
++ memcpy(ctx->enc_key, key, keylen);
++ return 0;
++}
++
++static int qce_des3_setkey(struct crypto_skcipher *ablk, const u8 *key,
++ unsigned int keylen)
++{
++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk);
++ int err;
++
++ err = verify_skcipher_des3_key(ablk, key);
++ if (err)
++ return err;
++
++ ctx->enc_keylen = keylen;
++ memcpy(ctx->enc_key, key, keylen);
++ return 0;
++}
++
++static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt)
++{
++ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
++ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
++ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
++ int ret;
++
++ rctx->flags = tmpl->alg_flags;
++ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
++
++ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
++ ctx->enc_keylen != AES_KEYSIZE_256) {
++ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
++
++ skcipher_request_set_sync_tfm(subreq, ctx->fallback);
++ skcipher_request_set_callback(subreq, req->base.flags,
++ NULL, NULL);
++ skcipher_request_set_crypt(subreq, req->src, req->dst,
++ req->cryptlen, req->iv);
++ ret = encrypt ? crypto_skcipher_encrypt(subreq) :
++ crypto_skcipher_decrypt(subreq);
++ skcipher_request_zero(subreq);
++ return ret;
++ }
++
++ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
++}
++
++static int qce_skcipher_encrypt(struct skcipher_request *req)
++{
++ return qce_skcipher_crypt(req, 1);
++}
++
++static int qce_skcipher_decrypt(struct skcipher_request *req)
++{
++ return qce_skcipher_crypt(req, 0);
++}
++
++static int qce_skcipher_init(struct crypto_skcipher *tfm)
++{
++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
++
++ memset(ctx, 0, sizeof(*ctx));
++ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
++
++ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base),
++ 0, CRYPTO_ALG_NEED_FALLBACK);
++ return PTR_ERR_OR_ZERO(ctx->fallback);
++}
++
++static void qce_skcipher_exit(struct crypto_skcipher *tfm)
++{
++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
++
++ crypto_free_sync_skcipher(ctx->fallback);
++}
++
++struct qce_skcipher_def {
++ unsigned long flags;
++ const char *name;
++ const char *drv_name;
++ unsigned int blocksize;
++ unsigned int ivsize;
++ unsigned int min_keysize;
++ unsigned int max_keysize;
++};
++
++static const struct qce_skcipher_def skcipher_def[] = {
++ {
++ .flags = QCE_ALG_AES | QCE_MODE_ECB,
++ .name = "ecb(aes)",
++ .drv_name = "ecb-aes-qce",
++ .blocksize = AES_BLOCK_SIZE,
++ .ivsize = AES_BLOCK_SIZE,
++ .min_keysize = AES_MIN_KEY_SIZE,
++ .max_keysize = AES_MAX_KEY_SIZE,
++ },
++ {
++ .flags = QCE_ALG_AES | QCE_MODE_CBC,
++ .name = "cbc(aes)",
++ .drv_name = "cbc-aes-qce",
++ .blocksize = AES_BLOCK_SIZE,
++ .ivsize = AES_BLOCK_SIZE,
++ .min_keysize = AES_MIN_KEY_SIZE,
++ .max_keysize = AES_MAX_KEY_SIZE,
++ },
++ {
++ .flags = QCE_ALG_AES | QCE_MODE_CTR,
++ .name = "ctr(aes)",
++ .drv_name = "ctr-aes-qce",
++ .blocksize = AES_BLOCK_SIZE,
++ .ivsize = AES_BLOCK_SIZE,
++ .min_keysize = AES_MIN_KEY_SIZE,
++ .max_keysize = AES_MAX_KEY_SIZE,
++ },
++ {
++ .flags = QCE_ALG_AES | QCE_MODE_XTS,
++ .name = "xts(aes)",
++ .drv_name = "xts-aes-qce",
++ .blocksize = AES_BLOCK_SIZE,
++ .ivsize = AES_BLOCK_SIZE,
++ .min_keysize = AES_MIN_KEY_SIZE,
++ .max_keysize = AES_MAX_KEY_SIZE,
++ },
++ {
++ .flags = QCE_ALG_DES | QCE_MODE_ECB,
++ .name = "ecb(des)",
++ .drv_name = "ecb-des-qce",
++ .blocksize = DES_BLOCK_SIZE,
++ .ivsize = 0,
++ .min_keysize = DES_KEY_SIZE,
++ .max_keysize = DES_KEY_SIZE,
++ },
++ {
++ .flags = QCE_ALG_DES | QCE_MODE_CBC,
++ .name = "cbc(des)",
++ .drv_name = "cbc-des-qce",
++ .blocksize = DES_BLOCK_SIZE,
++ .ivsize = DES_BLOCK_SIZE,
++ .min_keysize = DES_KEY_SIZE,
++ .max_keysize = DES_KEY_SIZE,
++ },
++ {
++ .flags = QCE_ALG_3DES | QCE_MODE_ECB,
++ .name = "ecb(des3_ede)",
++ .drv_name = "ecb-3des-qce",
++ .blocksize = DES3_EDE_BLOCK_SIZE,
++ .ivsize = 0,
++ .min_keysize = DES3_EDE_KEY_SIZE,
++ .max_keysize = DES3_EDE_KEY_SIZE,
++ },
++ {
++ .flags = QCE_ALG_3DES | QCE_MODE_CBC,
++ .name = "cbc(des3_ede)",
++ .drv_name = "cbc-3des-qce",
++ .blocksize = DES3_EDE_BLOCK_SIZE,
++ .ivsize = DES3_EDE_BLOCK_SIZE,
++ .min_keysize = DES3_EDE_KEY_SIZE,
++ .max_keysize = DES3_EDE_KEY_SIZE,
++ },
++};
++
++static int qce_skcipher_register_one(const struct qce_skcipher_def *def,
++ struct qce_device *qce)
++{
++ struct qce_alg_template *tmpl;
++ struct skcipher_alg *alg;
++ int ret;
++
++ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
++ if (!tmpl)
++ return -ENOMEM;
++
++ alg = &tmpl->alg.skcipher;
++
++ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
++ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
++ def->drv_name);
++
++ alg->base.cra_blocksize = def->blocksize;
++ alg->ivsize = def->ivsize;
++ alg->min_keysize = def->min_keysize;
++ alg->max_keysize = def->max_keysize;
++ alg->setkey = IS_3DES(def->flags) ? qce_des3_setkey :
++ IS_DES(def->flags) ? qce_des_setkey :
++ qce_skcipher_setkey;
++ alg->encrypt = qce_skcipher_encrypt;
++ alg->decrypt = qce_skcipher_decrypt;
++
++ alg->base.cra_priority = 300;
++ alg->base.cra_flags = CRYPTO_ALG_ASYNC |
++ CRYPTO_ALG_NEED_FALLBACK |
++ CRYPTO_ALG_KERN_DRIVER_ONLY;
++ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
++ alg->base.cra_alignmask = 0;
++ alg->base.cra_module = THIS_MODULE;
++
++ alg->init = qce_skcipher_init;
++ alg->exit = qce_skcipher_exit;
++
++ INIT_LIST_HEAD(&tmpl->entry);
++ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;
++ tmpl->alg_flags = def->flags;
++ tmpl->qce = qce;
++
++ ret = crypto_register_skcipher(alg);
++ if (ret) {
++ kfree(tmpl);
++ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name);
++ return ret;
++ }
++
++ list_add_tail(&tmpl->entry, &skcipher_algs);
++ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name);
++ return 0;
++}
++
++static void qce_skcipher_unregister(struct qce_device *qce)
++{
++ struct qce_alg_template *tmpl, *n;
++
++ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) {
++ crypto_unregister_skcipher(&tmpl->alg.skcipher);
++ list_del(&tmpl->entry);
++ kfree(tmpl);
++ }
++}
++
++static int qce_skcipher_register(struct qce_device *qce)
++{
++ int ret, i;
++
++ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) {
++ ret = qce_skcipher_register_one(&skcipher_def[i], qce);
++ if (ret)
++ goto err;
++ }
++
++ return 0;
++err:
++ qce_skcipher_unregister(qce);
++ return ret;
++}
++
++const struct qce_algo_ops skcipher_ops = {
++ .type = CRYPTO_ALG_TYPE_SKCIPHER,
++ .register_algs = qce_skcipher_register,
++ .unregister_algs = qce_skcipher_unregister,
++ .async_req_handle = qce_skcipher_async_req_handle,
++};
--- /dev/null
+From bb5c863b3d3cbd10e80b2ebf409934a091058f54 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 20 Dec 2019 16:02:13 -0300
+Subject: [PATCH 02/11] crypto: qce - fix ctr-aes-qce block, chunk sizes
+
+Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher,
+adding the definition for chucksize instead, where the underlying block
+size belongs.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/qce/skcipher.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -270,6 +270,7 @@ struct qce_skcipher_def {
+ const char *name;
+ const char *drv_name;
+ unsigned int blocksize;
++ unsigned int chunksize;
+ unsigned int ivsize;
+ unsigned int min_keysize;
+ unsigned int max_keysize;
+@@ -298,7 +299,8 @@ static const struct qce_skcipher_def skc
+ .flags = QCE_ALG_AES | QCE_MODE_CTR,
+ .name = "ctr(aes)",
+ .drv_name = "ctr-aes-qce",
+- .blocksize = AES_BLOCK_SIZE,
++ .blocksize = 1,
++ .chunksize = AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .min_keysize = AES_MIN_KEY_SIZE,
+ .max_keysize = AES_MAX_KEY_SIZE,
+@@ -368,6 +370,7 @@ static int qce_skcipher_register_one(con
+ def->drv_name);
+
+ alg->base.cra_blocksize = def->blocksize;
++ alg->chunksize = def->chunksize;
+ alg->ivsize = def->ivsize;
+ alg->min_keysize = def->min_keysize;
+ alg->max_keysize = def->max_keysize;
--- /dev/null
+From 7de4c2bd196f111e39cc60f6197654aff23ba2b4 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 20 Dec 2019 16:02:14 -0300
+Subject: [PATCH 03/11] crypto: qce - fix xts-aes-qce key sizes
+
+XTS-mode uses two keys, so the keysizes should be doubled in
+skcipher_def, and halved when checking if it is AES-128/192/256.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/qce/skcipher.c | 13 ++++++++-----
+ 1 file changed, 8 insertions(+), 5 deletions(-)
+
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -154,12 +154,13 @@ static int qce_skcipher_setkey(struct cr
+ {
+ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk);
+ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
++ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags;
+ int ret;
+
+ if (!key || !keylen)
+ return -EINVAL;
+
+- switch (keylen) {
++ switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
+ case AES_KEYSIZE_128:
+ case AES_KEYSIZE_256:
+ break;
+@@ -213,13 +214,15 @@ static int qce_skcipher_crypt(struct skc
+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
+ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
++ int keylen;
+ int ret;
+
+ rctx->flags = tmpl->alg_flags;
+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
++ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
+
+- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
+- ctx->enc_keylen != AES_KEYSIZE_256) {
++ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
++ keylen != AES_KEYSIZE_256) {
+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
+
+ skcipher_request_set_sync_tfm(subreq, ctx->fallback);
+@@ -311,8 +314,8 @@ static const struct qce_skcipher_def skc
+ .drv_name = "xts-aes-qce",
+ .blocksize = AES_BLOCK_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+- .min_keysize = AES_MIN_KEY_SIZE,
+- .max_keysize = AES_MAX_KEY_SIZE,
++ .min_keysize = AES_MIN_KEY_SIZE * 2,
++ .max_keysize = AES_MAX_KEY_SIZE * 2,
+ },
+ {
+ .flags = QCE_ALG_DES | QCE_MODE_ECB,
--- /dev/null
+From 3ee50c896d712dc2fc8f34c2cd1918d035e74045 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 20 Dec 2019 16:02:15 -0300
+Subject: [PATCH 04/11] crypto: qce - save a sg table slot for result buf
+
+When ctr-aes-qce is used for gcm-mode, an extra sg entry for the
+authentication tag is present, causing trouble when the qce driver
+prepares the dst-results sg table for dma.
+
+It computes the number of entries needed with sg_nents_for_len, leaving
+out the tag entry. Then it creates a sg table with that number plus
+one, used to store a result buffer.
+
+When copying the sg table, there's no limit to the number of entries
+copied, so the extra slot is filled with the authentication tag sg.
+When the driver tries to add the result sg, the list is full, and it
+returns EINVAL.
+
+By limiting the number of sg entries copied to the dest table, the slot
+for the result buffer is guaranteed to be unused.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/qce/dma.c | 6 ++++--
+ drivers/crypto/qce/dma.h | 3 ++-
+ drivers/crypto/qce/skcipher.c | 4 ++--
+ 3 files changed, 8 insertions(+), 5 deletions(-)
+
+--- a/drivers/crypto/qce/dma.c
++++ b/drivers/crypto/qce/dma.c
+@@ -47,7 +47,8 @@ void qce_dma_release(struct qce_dma_data
+ }
+
+ struct scatterlist *
+-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl)
++qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
++ int max_ents)
+ {
+ struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
+
+@@ -60,12 +61,13 @@ qce_sgtable_add(struct sg_table *sgt, st
+ if (!sg)
+ return ERR_PTR(-EINVAL);
+
+- while (new_sgl && sg) {
++ while (new_sgl && sg && max_ents) {
+ sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
+ new_sgl->offset);
+ sg_last = sg;
+ sg = sg_next(sg);
+ new_sgl = sg_next(new_sgl);
++ max_ents--;
+ }
+
+ return sg_last;
+--- a/drivers/crypto/qce/dma.h
++++ b/drivers/crypto/qce/dma.h
+@@ -42,6 +42,7 @@ int qce_dma_prep_sgs(struct qce_dma_data
+ void qce_dma_issue_pending(struct qce_dma_data *dma);
+ int qce_dma_terminate_all(struct qce_dma_data *dma);
+ struct scatterlist *
+-qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add);
++qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
++ int max_ents);
+
+ #endif /* _DMA_H_ */
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -95,13 +95,13 @@ qce_skcipher_async_req_handle(struct cry
+
+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
+
+- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
+ if (IS_ERR(sg)) {
+ ret = PTR_ERR(sg);
+ goto error_free;
+ }
+
+- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
+ if (IS_ERR(sg)) {
+ ret = PTR_ERR(sg);
+ goto error_free;
--- /dev/null
+From 3e806a12d10af2581aa26c37b58439286eab9782 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 20 Dec 2019 16:02:16 -0300
+Subject: [PATCH 05/11] crypto: qce - update the skcipher IV
+
+Update the IV after the completion of each cipher operation.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/qce/skcipher.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -21,6 +21,7 @@ static void qce_skcipher_done(void *data
+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
+ struct qce_device *qce = tmpl->qce;
++ struct qce_result_dump *result_buf = qce->dma.result_buf;
+ enum dma_data_direction dir_src, dir_dst;
+ u32 status;
+ int error;
+@@ -45,6 +46,7 @@ static void qce_skcipher_done(void *data
+ if (error < 0)
+ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
+
++ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize);
+ qce->async_req_done(tmpl->qce, error);
+ }
+
--- /dev/null
+From 8ceda883205db6dfedb82e39f67feae3b50c95a1 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 20 Dec 2019 16:02:17 -0300
+Subject: [PATCH 06/11] crypto: qce - initialize fallback only for AES
+
+Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where
+AES-192 is not handled by the qce hardware, and don't allocate & free
+the fallback skcipher for other algorithms.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/qce/skcipher.c | 17 ++++++++++++++---
+ 1 file changed, 14 insertions(+), 3 deletions(-)
+
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -257,7 +257,14 @@ static int qce_skcipher_init(struct cryp
+
+ memset(ctx, 0, sizeof(*ctx));
+ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
++ return 0;
++}
++
++static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm)
++{
++ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
+
++ qce_skcipher_init(tfm);
+ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base),
+ 0, CRYPTO_ALG_NEED_FALLBACK);
+ return PTR_ERR_OR_ZERO(ctx->fallback);
+@@ -387,14 +394,18 @@ static int qce_skcipher_register_one(con
+
+ alg->base.cra_priority = 300;
+ alg->base.cra_flags = CRYPTO_ALG_ASYNC |
+- CRYPTO_ALG_NEED_FALLBACK |
+ CRYPTO_ALG_KERN_DRIVER_ONLY;
+ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
+ alg->base.cra_alignmask = 0;
+ alg->base.cra_module = THIS_MODULE;
+
+- alg->init = qce_skcipher_init;
+- alg->exit = qce_skcipher_exit;
++ if (IS_AES(def->flags)) {
++ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK;
++ alg->init = qce_skcipher_init_fallback;
++ alg->exit = qce_skcipher_exit;
++ } else {
++ alg->init = qce_skcipher_init;
++ }
+
+ INIT_LIST_HEAD(&tmpl->entry);
+ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;
--- /dev/null
+From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 20 Dec 2019 16:02:18 -0300
+Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers
+
+Allow the user to choose whether to build support for all algorithms
+(default), hashes-only, or skciphers-only.
+
+The QCE engine does not appear to scale as well as the CPU to handle
+multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
+QCE handles only 2 requests in parallel.
+
+Ipsec throughput seems to improve when disabling either family of
+algorithms, sharing the load with the CPU. Enabling skciphers-only
+appears to work best.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -616,6 +616,14 @@ config CRYPTO_DEV_QCE
+ tristate "Qualcomm crypto engine accelerator"
+ depends on ARCH_QCOM || COMPILE_TEST
+ depends on HAS_IOMEM
++ help
++ This driver supports Qualcomm crypto engine accelerator
++ hardware. To compile this driver as a module, choose M here. The
++ module will be called qcrypto.
++
++config CRYPTO_DEV_QCE_SKCIPHER
++ bool
++ depends on CRYPTO_DEV_QCE
+ select CRYPTO_AES
+ select CRYPTO_LIB_DES
+ select CRYPTO_ECB
+@@ -623,10 +631,57 @@ config CRYPTO_DEV_QCE
+ select CRYPTO_XTS
+ select CRYPTO_CTR
+ select CRYPTO_BLKCIPHER
++
++config CRYPTO_DEV_QCE_SHA
++ bool
++ depends on CRYPTO_DEV_QCE
++
++choice
++ prompt "Algorithms enabled for QCE acceleration"
++ default CRYPTO_DEV_QCE_ENABLE_ALL
++ depends on CRYPTO_DEV_QCE
+ help
+- This driver supports Qualcomm crypto engine accelerator
+- hardware. To compile this driver as a module, choose M here. The
+- module will be called qcrypto.
++ This option allows to choose whether to build support for all algorihtms
++ (default), hashes-only, or skciphers-only.
++
++ The QCE engine does not appear to scale as well as the CPU to handle
++ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
++ QCE handles only 2 requests in parallel.
++
++ Ipsec throughput seems to improve when disabling either family of
++ algorithms, sharing the load with the CPU. Enabling skciphers-only
++ appears to work best.
++
++ config CRYPTO_DEV_QCE_ENABLE_ALL
++ bool "All supported algorithms"
++ select CRYPTO_DEV_QCE_SKCIPHER
++ select CRYPTO_DEV_QCE_SHA
++ help
++ Enable all supported algorithms:
++ - AES (CBC, CTR, ECB, XTS)
++ - 3DES (CBC, ECB)
++ - DES (CBC, ECB)
++ - SHA1, HMAC-SHA1
++ - SHA256, HMAC-SHA256
++
++ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER
++ bool "Symmetric-key ciphers only"
++ select CRYPTO_DEV_QCE_SKCIPHER
++ help
++ Enable symmetric-key ciphers only:
++ - AES (CBC, CTR, ECB, XTS)
++ - 3DES (ECB, CBC)
++ - DES (ECB, CBC)
++
++ config CRYPTO_DEV_QCE_ENABLE_SHA
++ bool "Hash/HMAC only"
++ select CRYPTO_DEV_QCE_SHA
++ help
++ Enable hashes/HMAC algorithms only:
++ - SHA1, HMAC-SHA1
++ - SHA256, HMAC-SHA256
++
++endchoice
+
+ config CRYPTO_DEV_QCOM_RNG
+ tristate "Qualcomm Random Number Generator Driver"
+--- a/drivers/crypto/qce/Makefile
++++ b/drivers/crypto/qce/Makefile
+@@ -2,6 +2,7 @@
+ obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o
+ qcrypto-objs := core.o \
+ common.o \
+- dma.o \
+- sha.o \
+- skcipher.o
++ dma.o
++
++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o
++qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o
+--- a/drivers/crypto/qce/common.c
++++ b/drivers/crypto/qce/common.c
+@@ -45,52 +45,56 @@ qce_clear_array(struct qce_device *qce,
+ qce_write(qce, offset + i * sizeof(u32), 0);
+ }
+
+-static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
++static u32 qce_config_reg(struct qce_device *qce, int little)
+ {
+- u32 cfg = 0;
++ u32 beats = (qce->burst_size >> 3) - 1;
++ u32 pipe_pair = qce->pipe_pair_id;
++ u32 config;
+
+- if (IS_AES(flags)) {
+- if (aes_key_size == AES_KEYSIZE_128)
+- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
+- else if (aes_key_size == AES_KEYSIZE_256)
+- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
+- }
++ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
++ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
++ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
++ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
++ config &= ~HIGH_SPD_EN_N_SHIFT;
+
+- if (IS_AES(flags))
+- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
+- else if (IS_DES(flags) || IS_3DES(flags))
+- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
++ if (little)
++ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
+
+- if (IS_DES(flags))
+- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
++ return config;
++}
+
+- if (IS_3DES(flags))
+- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
++void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
++{
++ __be32 *d = dst;
++ const u8 *s = src;
++ unsigned int n;
+
+- switch (flags & QCE_MODE_MASK) {
+- case QCE_MODE_ECB:
+- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
+- break;
+- case QCE_MODE_CBC:
+- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
+- break;
+- case QCE_MODE_CTR:
+- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
+- break;
+- case QCE_MODE_XTS:
+- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
+- break;
+- case QCE_MODE_CCM:
+- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
+- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
+- break;
+- default:
+- return ~0;
++ n = len / sizeof(u32);
++ for (; n > 0; n--) {
++ *d = cpu_to_be32p((const __u32 *) s);
++ s += sizeof(__u32);
++ d++;
+ }
++}
+
+- return cfg;
++static void qce_setup_config(struct qce_device *qce)
++{
++ u32 config;
++
++ /* get big endianness */
++ config = qce_config_reg(qce, 0);
++
++ /* clear status */
++ qce_write(qce, REG_STATUS, 0);
++ qce_write(qce, REG_CONFIG, config);
++}
++
++static inline void qce_crypto_go(struct qce_device *qce)
++{
++ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
+ }
+
++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
+ static u32 qce_auth_cfg(unsigned long flags, u32 key_size)
+ {
+ u32 cfg = 0;
+@@ -137,88 +141,6 @@ static u32 qce_auth_cfg(unsigned long fl
+ return cfg;
+ }
+
+-static u32 qce_config_reg(struct qce_device *qce, int little)
+-{
+- u32 beats = (qce->burst_size >> 3) - 1;
+- u32 pipe_pair = qce->pipe_pair_id;
+- u32 config;
+-
+- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
+- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
+- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
+- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
+- config &= ~HIGH_SPD_EN_N_SHIFT;
+-
+- if (little)
+- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
+-
+- return config;
+-}
+-
+-void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
+-{
+- __be32 *d = dst;
+- const u8 *s = src;
+- unsigned int n;
+-
+- n = len / sizeof(u32);
+- for (; n > 0; n--) {
+- *d = cpu_to_be32p((const __u32 *) s);
+- s += sizeof(__u32);
+- d++;
+- }
+-}
+-
+-static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
+-{
+- u8 swap[QCE_AES_IV_LENGTH];
+- u32 i, j;
+-
+- if (ivsize > QCE_AES_IV_LENGTH)
+- return;
+-
+- memset(swap, 0, QCE_AES_IV_LENGTH);
+-
+- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
+- i < QCE_AES_IV_LENGTH; i++, j--)
+- swap[i] = src[j];
+-
+- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
+-}
+-
+-static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
+- unsigned int enckeylen, unsigned int cryptlen)
+-{
+- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
+- unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
+- unsigned int xtsdusize;
+-
+- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
+- enckeylen / 2);
+- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
+-
+- /* xts du size 512B */
+- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
+- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
+-}
+-
+-static void qce_setup_config(struct qce_device *qce)
+-{
+- u32 config;
+-
+- /* get big endianness */
+- config = qce_config_reg(qce, 0);
+-
+- /* clear status */
+- qce_write(qce, REG_STATUS, 0);
+- qce_write(qce, REG_CONFIG, config);
+-}
+-
+-static inline void qce_crypto_go(struct qce_device *qce)
+-{
+- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
+-}
+-
+ static int qce_setup_regs_ahash(struct crypto_async_request *async_req,
+ u32 totallen, u32 offset)
+ {
+@@ -303,6 +225,87 @@ go_proc:
+
+ return 0;
+ }
++#endif
++
++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
++static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
++{
++ u32 cfg = 0;
++
++ if (IS_AES(flags)) {
++ if (aes_key_size == AES_KEYSIZE_128)
++ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
++ else if (aes_key_size == AES_KEYSIZE_256)
++ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
++ }
++
++ if (IS_AES(flags))
++ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
++ else if (IS_DES(flags) || IS_3DES(flags))
++ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
++
++ if (IS_DES(flags))
++ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
++
++ if (IS_3DES(flags))
++ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
++
++ switch (flags & QCE_MODE_MASK) {
++ case QCE_MODE_ECB:
++ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
++ break;
++ case QCE_MODE_CBC:
++ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
++ break;
++ case QCE_MODE_CTR:
++ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
++ break;
++ case QCE_MODE_XTS:
++ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
++ break;
++ case QCE_MODE_CCM:
++ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
++ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
++ break;
++ default:
++ return ~0;
++ }
++
++ return cfg;
++}
++
++static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
++{
++ u8 swap[QCE_AES_IV_LENGTH];
++ u32 i, j;
++
++ if (ivsize > QCE_AES_IV_LENGTH)
++ return;
++
++ memset(swap, 0, QCE_AES_IV_LENGTH);
++
++ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
++ i < QCE_AES_IV_LENGTH; i++, j--)
++ swap[i] = src[j];
++
++ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
++}
++
++static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
++ unsigned int enckeylen, unsigned int cryptlen)
++{
++ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
++ unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
++ unsigned int xtsdusize;
++
++ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
++ enckeylen / 2);
++ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
++
++ /* xts du size 512B */
++ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
++ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
++}
+
+ static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
+ u32 totallen, u32 offset)
+@@ -384,15 +387,20 @@ static int qce_setup_regs_skcipher(struc
+
+ return 0;
+ }
++#endif
+
+ int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen,
+ u32 offset)
+ {
+ switch (type) {
++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
+ case CRYPTO_ALG_TYPE_SKCIPHER:
+ return qce_setup_regs_skcipher(async_req, totallen, offset);
++#endif
++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
+ case CRYPTO_ALG_TYPE_AHASH:
+ return qce_setup_regs_ahash(async_req, totallen, offset);
++#endif
+ default:
+ return -EINVAL;
+ }
+--- a/drivers/crypto/qce/core.c
++++ b/drivers/crypto/qce/core.c
+@@ -22,8 +22,12 @@
+ #define QCE_QUEUE_LENGTH 1
+
+ static const struct qce_algo_ops *qce_ops[] = {
++#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
+ &skcipher_ops,
++#endif
++#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
+ &ahash_ops,
++#endif
+ };
+
+ static void qce_unregister_algs(struct qce_device *qce)
--- /dev/null
+From d6364b8128439a8c0e381f80c38667de9f15eef8 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 7 Feb 2020 12:02:25 -0300
+Subject: [PATCH 09/11] crypto: qce - use cryptlen when adding extra sgl
+
+The qce crypto driver appends an extra entry to the dst sgl, to maintain
+private state information.
+
+When the gcm driver sends requests to the ctr skcipher, it passes the
+authentication tag after the actual crypto payload, but it must not be
+touched.
+
+Commit 1336c2221bee ("crypto: qce - save a sg table slot for result
+buf") limited the destination sgl to avoid overwriting the
+authentication tag but it assumed the tag would be in a separate sgl
+entry.
+
+This is not always the case, so it is better to limit the length of the
+destination buffer to req->cryptlen before appending the result buf.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/qce/dma.c | 11 ++++++-----
+ drivers/crypto/qce/dma.h | 2 +-
+ drivers/crypto/qce/skcipher.c | 5 +++--
+ 3 files changed, 10 insertions(+), 8 deletions(-)
+
+--- a/drivers/crypto/qce/dma.c
++++ b/drivers/crypto/qce/dma.c
+@@ -48,9 +48,10 @@ void qce_dma_release(struct qce_dma_data
+
+ struct scatterlist *
+ qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
+- int max_ents)
++ unsigned int max_len)
+ {
+ struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
++ unsigned int new_len;
+
+ while (sg) {
+ if (!sg_page(sg))
+@@ -61,13 +62,13 @@ qce_sgtable_add(struct sg_table *sgt, st
+ if (!sg)
+ return ERR_PTR(-EINVAL);
+
+- while (new_sgl && sg && max_ents) {
+- sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
+- new_sgl->offset);
++ while (new_sgl && sg && max_len) {
++ new_len = new_sgl->length > max_len ? max_len : new_sgl->length;
++ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset);
+ sg_last = sg;
+ sg = sg_next(sg);
+ new_sgl = sg_next(new_sgl);
+- max_ents--;
++ max_len -= new_len;
+ }
+
+ return sg_last;
+--- a/drivers/crypto/qce/dma.h
++++ b/drivers/crypto/qce/dma.h
+@@ -43,6 +43,6 @@ void qce_dma_issue_pending(struct qce_dm
+ int qce_dma_terminate_all(struct qce_dma_data *dma);
+ struct scatterlist *
+ qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
+- int max_ents);
++ unsigned int max_len);
+
+ #endif /* _DMA_H_ */
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -97,13 +97,14 @@ qce_skcipher_async_req_handle(struct cry
+
+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
+
+- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
++ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen);
+ if (IS_ERR(sg)) {
+ ret = PTR_ERR(sg);
+ goto error_free;
+ }
+
+- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
++ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg,
++ QCE_RESULT_BUF_SZ);
+ if (IS_ERR(sg)) {
+ ret = PTR_ERR(sg);
+ goto error_free;
--- /dev/null
+From ce163ba0bf298f1707321ac025ef639f88e62801 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 7 Feb 2020 12:02:26 -0300
+Subject: [PATCH 10/11] crypto: qce - use AES fallback for small requests
+
+Process small blocks using the fallback cipher, as a workaround for an
+observed failure (DMA-related, apparently) when computing the GCM ghash
+key. This brings a speed gain as well, since it avoids the latency of
+using the hardware engine to process small blocks.
+
+Using software for all 16-byte requests would be enough to make GCM
+work, but to increase performance, a larger threshold would be better.
+Measuring the performance of supported ciphers with openssl speed,
+software matches hardware at around 768-1024 bytes.
+
+Considering the 256-bit ciphers, software is 2-3 times faster than qce
+at 256-bytes, 30% faster at 512, and about even at 768-bytes. With
+128-bit keys, the break-even point would be around 1024-bytes.
+
+This adds the 'aes_sw_max_len' parameter, to set the largest request
+length processed by the software fallback. Its default is being set to
+512 bytes, a little lower than the break-even point, to balance the cost
+in CPU usage.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+
+--- a/drivers/crypto/Kconfig
++++ b/drivers/crypto/Kconfig
+@@ -683,6 +683,29 @@ choice
+
+ endchoice
+
++config CRYPTO_DEV_QCE_SW_MAX_LEN
++ int "Default maximum request size to use software for AES"
++ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER
++ default 512
++ help
++ This sets the default maximum request size to perform AES requests
++ using software instead of the crypto engine. It can be changed by
++ setting the aes_sw_max_len parameter.
++
++ Small blocks are processed faster in software than hardware.
++ Considering the 256-bit ciphers, software is 2-3 times faster than
++ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes.
++ With 128-bit keys, the break-even point would be around 1024-bytes.
++
++ The default is set a little lower, to 512 bytes, to balance the
++ cost in CPU usage. The minimum recommended setting is 16-bytes
++ (1 AES block), since AES-GCM will fail if you set it lower.
++ Setting this to zero will send all requests to the hardware.
++
++ Note that 192-bit keys are not supported by the hardware and are
++ always processed by the software fallback, and all DES requests
++ are done by the hardware.
++
+ config CRYPTO_DEV_QCOM_RNG
+ tristate "Qualcomm Random Number Generator Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -5,6 +5,7 @@
+
+ #include <linux/device.h>
+ #include <linux/interrupt.h>
++#include <linux/moduleparam.h>
+ #include <linux/types.h>
+ #include <crypto/aes.h>
+ #include <crypto/internal/des.h>
+@@ -12,6 +13,13 @@
+
+ #include "cipher.h"
+
++static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN;
++module_param(aes_sw_max_len, uint, 0644);
++MODULE_PARM_DESC(aes_sw_max_len,
++ "Only use hardware for AES requests larger than this "
++ "[0=always use hardware; anything <16 breaks AES-GCM; default="
++ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]");
++
+ static LIST_HEAD(skcipher_algs);
+
+ static void qce_skcipher_done(void *data)
+@@ -166,15 +174,10 @@ static int qce_skcipher_setkey(struct cr
+ switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
+ case AES_KEYSIZE_128:
+ case AES_KEYSIZE_256:
++ memcpy(ctx->enc_key, key, keylen);
+ break;
+- default:
+- goto fallback;
+ }
+
+- ctx->enc_keylen = keylen;
+- memcpy(ctx->enc_key, key, keylen);
+- return 0;
+-fallback:
+ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
+ if (!ret)
+ ctx->enc_keylen = keylen;
+@@ -224,8 +227,9 @@ static int qce_skcipher_crypt(struct skc
+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
+
+- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
+- keylen != AES_KEYSIZE_256) {
++ if (IS_AES(rctx->flags) &&
++ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
++ req->cryptlen <= aes_sw_max_len)) {
+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
+
+ skcipher_request_set_sync_tfm(subreq, ctx->fallback);
--- /dev/null
+From 7f19380b2cfd412dcef2facefb3f6c62788864d7 Mon Sep 17 00:00:00 2001
+From: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Date: Fri, 7 Feb 2020 12:02:27 -0300
+Subject: [PATCH 11/11] crypto: qce - handle AES-XTS cases that qce fails
+
+QCE hangs when presented with an AES-XTS request whose length is larger
+than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the
+fallback cipher handle them.
+
+Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
+Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+---
+ drivers/crypto/qce/common.c | 2 --
+ drivers/crypto/qce/common.h | 3 +++
+ drivers/crypto/qce/skcipher.c | 9 +++++++--
+ 3 files changed, 10 insertions(+), 4 deletions(-)
+
+--- a/drivers/crypto/qce/common.c
++++ b/drivers/crypto/qce/common.c
+@@ -15,8 +15,6 @@
+ #include "regs-v5.h"
+ #include "sha.h"
+
+-#define QCE_SECTOR_SIZE 512
+-
+ static inline u32 qce_read(struct qce_device *qce, u32 offset)
+ {
+ return readl(qce->base + offset);
+--- a/drivers/crypto/qce/common.h
++++ b/drivers/crypto/qce/common.h
+@@ -12,6 +12,9 @@
+ #include <crypto/hash.h>
+ #include <crypto/internal/skcipher.h>
+
++/* xts du size */
++#define QCE_SECTOR_SIZE 512
++
+ /* key size in bytes */
+ #define QCE_SHA_HMAC_KEY_SIZE 64
+ #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256
+--- a/drivers/crypto/qce/skcipher.c
++++ b/drivers/crypto/qce/skcipher.c
+@@ -227,9 +227,14 @@ static int qce_skcipher_crypt(struct skc
+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
+
++ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and
++ * is not a multiple of it; pass such requests to the fallback
++ */
+ if (IS_AES(rctx->flags) &&
+- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
+- req->cryptlen <= aes_sw_max_len)) {
++ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
++ req->cryptlen <= aes_sw_max_len) ||
++ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE &&
++ req->cryptlen % QCE_SECTOR_SIZE))) {
+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
+
+ skcipher_request_set_sync_tfm(subreq, ctx->fallback);
--- /dev/null
+From 3c9d8f6c03a2cda1849ec3c84f82ec030d1f49ef Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Sun, 3 May 2020 22:18:22 +0200
+Subject: [PATCH] phy: add driver for Qualcomm IPQ40xx USB PHY
+
+Add a driver to setup the USB PHY-s on Qualcom m IPQ40xx series SoCs.
+The driver sets up HS and SS phys.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Link: https://lore.kernel.org/r/20200503201823.531757-1-robert.marko@sartura.hr
+Signed-off-by: Vinod Koul <vkoul@kernel.org>
+---
+ drivers/phy/qualcomm/Kconfig | 7 +
+ drivers/phy/qualcomm/Makefile | 1 +
+ drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 148 ++++++++++++++++++++
+ 3 files changed, 156 insertions(+)
+ create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+
+--- a/drivers/phy/qualcomm/Kconfig
++++ b/drivers/phy/qualcomm/Kconfig
+@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA
+ depends on OF
+ select GENERIC_PHY
+
++config PHY_QCOM_IPQ4019_USB
++ tristate "Qualcomm IPQ4019 USB PHY driver"
++ depends on OF && (ARCH_QCOM || COMPILE_TEST)
++ select GENERIC_PHY
++ help
++ Support for the USB PHY-s on Qualcomm IPQ40xx SoC-s.
++
+ config PHY_QCOM_IPQ806X_SATA
+ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
+ depends on ARCH_QCOM
+--- a/drivers/phy/qualcomm/Makefile
++++ b/drivers/phy/qualcomm/Makefile
+@@ -1,6 +1,7 @@
+ # SPDX-License-Identifier: GPL-2.0
+ obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
+ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
++obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
+ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
+ obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
+ obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
+--- /dev/null
++++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+@@ -0,0 +1,148 @@
++// SPDX-License-Identifier: GPL-2.0-or-later
++/*
++ * Copyright (C) 2018 John Crispin <john@phrozen.org>
++ *
++ * Based on code from
++ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
++ *
++ */
++
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/mutex.h>
++#include <linux/of_platform.h>
++#include <linux/of_device.h>
++#include <linux/phy/phy.h>
++#include <linux/platform_device.h>
++#include <linux/reset.h>
++
++struct ipq4019_usb_phy {
++ struct device *dev;
++ struct phy *phy;
++ void __iomem *base;
++ struct reset_control *por_rst;
++ struct reset_control *srif_rst;
++};
++
++static int ipq4019_ss_phy_power_off(struct phy *_phy)
++{
++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
++
++ reset_control_assert(phy->por_rst);
++ msleep(10);
++
++ return 0;
++}
++
++static int ipq4019_ss_phy_power_on(struct phy *_phy)
++{
++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
++
++ ipq4019_ss_phy_power_off(_phy);
++
++ reset_control_deassert(phy->por_rst);
++
++ return 0;
++}
++
++static struct phy_ops ipq4019_usb_ss_phy_ops = {
++ .power_on = ipq4019_ss_phy_power_on,
++ .power_off = ipq4019_ss_phy_power_off,
++};
++
++static int ipq4019_hs_phy_power_off(struct phy *_phy)
++{
++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
++
++ reset_control_assert(phy->por_rst);
++ msleep(10);
++
++ reset_control_assert(phy->srif_rst);
++ msleep(10);
++
++ return 0;
++}
++
++static int ipq4019_hs_phy_power_on(struct phy *_phy)
++{
++ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
++
++ ipq4019_hs_phy_power_off(_phy);
++
++ reset_control_deassert(phy->srif_rst);
++ msleep(10);
++
++ reset_control_deassert(phy->por_rst);
++
++ return 0;
++}
++
++static struct phy_ops ipq4019_usb_hs_phy_ops = {
++ .power_on = ipq4019_hs_phy_power_on,
++ .power_off = ipq4019_hs_phy_power_off,
++};
++
++static const struct of_device_id ipq4019_usb_phy_of_match[] = {
++ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops},
++ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops},
++ { },
++};
++MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
++
++static int ipq4019_usb_phy_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct resource *res;
++ struct phy_provider *phy_provider;
++ struct ipq4019_usb_phy *phy;
++
++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
++ if (!phy)
++ return -ENOMEM;
++
++ phy->dev = &pdev->dev;
++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ phy->base = devm_ioremap_resource(&pdev->dev, res);
++ if (IS_ERR(phy->base)) {
++ dev_err(dev, "failed to remap register memory\n");
++ return PTR_ERR(phy->base);
++ }
++
++ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
++ if (IS_ERR(phy->por_rst)) {
++ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
++ dev_err(dev, "POR reset is missing\n");
++ return PTR_ERR(phy->por_rst);
++ }
++
++ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst");
++ if (IS_ERR(phy->srif_rst))
++ return PTR_ERR(phy->srif_rst);
++
++ phy->phy = devm_phy_create(dev, NULL, of_device_get_match_data(dev));
++ if (IS_ERR(phy->phy)) {
++ dev_err(dev, "failed to create PHY\n");
++ return PTR_ERR(phy->phy);
++ }
++ phy_set_drvdata(phy->phy, phy);
++
++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
++
++ return PTR_ERR_OR_ZERO(phy_provider);
++}
++
++static struct platform_driver ipq4019_usb_phy_driver = {
++ .probe = ipq4019_usb_phy_probe,
++ .driver = {
++ .of_match_table = ipq4019_usb_phy_of_match,
++ .name = "ipq4019-usb-phy",
++ }
++};
++module_platform_driver(ipq4019_usb_phy_driver);
++
++MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
++MODULE_AUTHOR("John Crispin <john@phrozen.org>");
++MODULE_LICENSE("GPL v2");
--- /dev/null
+From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001
+From: Jaiganesh Narayanan <njaigane@codeaurora.org>
+Date: Thu, 1 Sep 2016 10:40:38 +0530
+Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support
+
+Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
+[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based
+ WiFi APs. ]
+Signed-off-by: Brian Norris <computersforpeace@gmail.com>
+---
+https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/
+
+ drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 +
+ drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++
+ drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++
+ 3 files changed, 16 insertions(+)
+
+--- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
++++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
+@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99);
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
++ .od_bit = 12, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+--- a/drivers/pinctrl/qcom/pinctrl-msm.c
++++ b/drivers/pinctrl/qcom/pinctrl-msm.c
+@@ -225,6 +225,10 @@ static int msm_config_reg(struct msm_pin
+ *bit = g->pull_bit;
+ *mask = 3;
+ break;
++ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
++ *bit = g->od_bit;
++ *mask = 1;
++ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ *bit = g->drv_bit;
+ *mask = 7;
+@@ -302,6 +306,12 @@ static int msm_config_group_get(struct p
+ if (!arg)
+ return -EINVAL;
+ break;
++ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
++ /* Pin is not open-drain */
++ if (!arg)
++ return -EINVAL;
++ arg = 1;
++ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ arg = msm_regval_to_drive(arg);
+ break;
+@@ -374,6 +384,9 @@ static int msm_config_group_set(struct p
+ else
+ arg = MSM_PULL_UP;
+ break;
++ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
++ arg = 1;
++ break;
+ case PIN_CONFIG_DRIVE_STRENGTH:
+ /* Check for invalid values */
+ if (arg > 16 || arg < 2 || (arg % 2) != 0)
+--- a/drivers/pinctrl/qcom/pinctrl-msm.h
++++ b/drivers/pinctrl/qcom/pinctrl-msm.h
+@@ -38,6 +38,7 @@ struct msm_function {
+ * @mux_bit: Offset in @ctl_reg for the pinmux function selection.
+ * @pull_bit: Offset in @ctl_reg for the bias configuration.
+ * @drv_bit: Offset in @ctl_reg for the drive strength configuration.
++ * @od_bit: Offset in @ctl_reg for controlling open drain.
+ * @oe_bit: Offset in @ctl_reg for controlling output enable.
+ * @in_bit: Offset in @io_reg for the input bit value.
+ * @out_bit: Offset in @io_reg for the output bit value.
+@@ -75,6 +76,7 @@ struct msm_pingroup {
+ unsigned pull_bit:5;
+ unsigned drv_bit:5;
+
++ unsigned od_bit:5;
+ unsigned oe_bit:5;
+ unsigned in_bit:5;
+ unsigned out_bit:5;
--- /dev/null
+From 707745e8d4e75b638b990d67950ab292b3b8ea2a Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Mon, 16 Dec 2019 01:36:46 +0100
+Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f
+
+Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix.
+The chip has 4MB of total capacity, divided into a total of 64 sectors,
+each 64KB sized. The chip also supports 4KB large sectors.
+Additionally, it supports dual and quad read modes.
+
+Functionality was verified on an HPE/Aruba AP-303 board.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
+---
+ drivers/mtd/spi-nor/spi-nor.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/drivers/mtd/spi-nor/spi-nor.c
++++ b/drivers/mtd/spi-nor/spi-nor.c
+@@ -2344,6 +2344,8 @@ static const struct flash_info spi_nor_i
+ { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
+ { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+ { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
++ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
++ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
+++ /dev/null
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Subject: [PATCH] crypto: qce - add CRYPTO_ALG_KERN_DRIVER_ONLY flag
-
-Set the CRYPTO_ALG_KERN_DRIVER_ONLY flag to all algorithms exposed by
-the qce driver, since they are all hardware accelerated, accessible
-through a kernel driver only, and not available directly to userspace.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/drivers/crypto/qce/ablkcipher.c
-+++ b/drivers/crypto/qce/ablkcipher.c
-@@ -380,7 +380,7 @@ static int qce_ablkcipher_register_one(c
-
- alg->cra_priority = 300;
- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK;
-+ CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
- alg->cra_alignmask = 0;
- alg->cra_type = &crypto_ablkcipher_type;
---- a/drivers/crypto/qce/sha.c
-+++ b/drivers/crypto/qce/sha.c
-@@ -495,7 +495,7 @@ static int qce_ahash_register_one(const
- base = &alg->halg.base;
- base->cra_blocksize = def->blocksize;
- base->cra_priority = 300;
-- base->cra_flags = CRYPTO_ALG_ASYNC;
-+ base->cra_flags = CRYPTO_ALG_ASYNC | CRYPTO_ALG_KERN_DRIVER_ONLY;
- base->cra_ctxsize = sizeof(struct qce_sha_ctx);
- base->cra_alignmask = 0;
- base->cra_module = THIS_MODULE;
+++ /dev/null
-From f441873642eebf20566c18d2966a8cd4b433ec1c Mon Sep 17 00:00:00 2001
-From: Ard Biesheuvel <ardb@kernel.org>
-Date: Tue, 5 Nov 2019 14:28:17 +0100
-Subject: [PATCH] crypto: qce - switch to skcipher API
-
-Commit 7a7ffe65c8c5 ("crypto: skcipher - Add top-level skcipher interface")
-dated 20 august 2015 introduced the new skcipher API which is supposed to
-replace both blkcipher and ablkcipher. While all consumers of the API have
-been converted long ago, some producers of the ablkcipher remain, forcing
-us to keep the ablkcipher support routines alive, along with the matching
-code to expose [a]blkciphers via the skcipher API.
-
-So switch this driver to the skcipher API, allowing us to finally drop the
-blkcipher code in the near future.
-
-Reviewed-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
-Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
-Backported-to-4.19-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-
---- a/drivers/crypto/qce/Makefile
-+++ b/drivers/crypto/qce/Makefile
-@@ -4,4 +4,4 @@ qcrypto-objs := core.o \
- common.o \
- dma.o \
- sha.o \
-- ablkcipher.o
-+ skcipher.o
---- a/drivers/crypto/qce/cipher.h
-+++ b/drivers/crypto/qce/cipher.h
-@@ -45,12 +45,12 @@ struct qce_cipher_reqctx {
- unsigned int cryptlen;
- };
-
--static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_tfm *tfm)
-+static inline struct qce_alg_template *to_cipher_tmpl(struct crypto_skcipher *tfm)
- {
-- struct crypto_alg *alg = tfm->__crt_alg;
-- return container_of(alg, struct qce_alg_template, alg.crypto);
-+ struct skcipher_alg *alg = crypto_skcipher_alg(tfm);
-+ return container_of(alg, struct qce_alg_template, alg.skcipher);
- }
-
--extern const struct qce_algo_ops ablkcipher_ops;
-+extern const struct qce_algo_ops skcipher_ops;
-
- #endif /* _CIPHER_H_ */
---- a/drivers/crypto/qce/common.c
-+++ b/drivers/crypto/qce/common.c
-@@ -304,13 +304,13 @@ go_proc:
- return 0;
- }
-
--static int qce_setup_regs_ablkcipher(struct crypto_async_request *async_req,
-+static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
- u32 totallen, u32 offset)
- {
-- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-+ struct skcipher_request *req = skcipher_request_cast(async_req);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(async_req->tfm);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
- struct qce_device *qce = tmpl->qce;
- __be32 enckey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(__be32)] = {0};
- __be32 enciv[QCE_MAX_IV_SIZE / sizeof(__be32)] = {0};
-@@ -389,8 +389,8 @@ int qce_start(struct crypto_async_reques
- u32 offset)
- {
- switch (type) {
-- case CRYPTO_ALG_TYPE_ABLKCIPHER:
-- return qce_setup_regs_ablkcipher(async_req, totallen, offset);
-+ case CRYPTO_ALG_TYPE_SKCIPHER:
-+ return qce_setup_regs_skcipher(async_req, totallen, offset);
- case CRYPTO_ALG_TYPE_AHASH:
- return qce_setup_regs_ahash(async_req, totallen, offset);
- default:
---- a/drivers/crypto/qce/common.h
-+++ b/drivers/crypto/qce/common.h
-@@ -10,6 +10,7 @@
- #include <linux/types.h>
- #include <crypto/aes.h>
- #include <crypto/hash.h>
-+#include <crypto/internal/skcipher.h>
-
- /* key size in bytes */
- #define QCE_SHA_HMAC_KEY_SIZE 64
-@@ -79,7 +80,7 @@ struct qce_alg_template {
- unsigned long alg_flags;
- const u32 *std_iv;
- union {
-- struct crypto_alg crypto;
-+ struct skcipher_alg skcipher;
- struct ahash_alg ahash;
- } alg;
- struct qce_device *qce;
---- a/drivers/crypto/qce/core.c
-+++ b/drivers/crypto/qce/core.c
-@@ -22,7 +22,7 @@
- #define QCE_QUEUE_LENGTH 1
-
- static const struct qce_algo_ops *qce_ops[] = {
-- &ablkcipher_ops,
-+ &skcipher_ops,
- &ahash_ops,
- };
-
---- a/drivers/crypto/qce/ablkcipher.c
-+++ /dev/null
-@@ -1,440 +0,0 @@
--// SPDX-License-Identifier: GPL-2.0-only
--/*
-- * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
-- */
--
--#include <linux/device.h>
--#include <linux/interrupt.h>
--#include <linux/types.h>
--#include <crypto/aes.h>
--#include <crypto/internal/des.h>
--#include <crypto/internal/skcipher.h>
--
--#include "cipher.h"
--
--static LIST_HEAD(ablkcipher_algs);
--
--static void qce_ablkcipher_done(void *data)
--{
-- struct crypto_async_request *async_req = data;
-- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
-- struct qce_device *qce = tmpl->qce;
-- enum dma_data_direction dir_src, dir_dst;
-- u32 status;
-- int error;
-- bool diff_dst;
--
-- diff_dst = (req->src != req->dst) ? true : false;
-- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
--
-- error = qce_dma_terminate_all(&qce->dma);
-- if (error)
-- dev_dbg(qce->dev, "ablkcipher dma termination error (%d)\n",
-- error);
--
-- if (diff_dst)
-- dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
-- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
--
-- sg_free_table(&rctx->dst_tbl);
--
-- error = qce_check_status(qce, &status);
-- if (error < 0)
-- dev_dbg(qce->dev, "ablkcipher operation error (%x)\n", status);
--
-- qce->async_req_done(tmpl->qce, error);
--}
--
--static int
--qce_ablkcipher_async_req_handle(struct crypto_async_request *async_req)
--{
-- struct ablkcipher_request *req = ablkcipher_request_cast(async_req);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-- struct crypto_ablkcipher *ablkcipher = crypto_ablkcipher_reqtfm(req);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(async_req->tfm);
-- struct qce_device *qce = tmpl->qce;
-- enum dma_data_direction dir_src, dir_dst;
-- struct scatterlist *sg;
-- bool diff_dst;
-- gfp_t gfp;
-- int ret;
--
-- rctx->iv = req->info;
-- rctx->ivsize = crypto_ablkcipher_ivsize(ablkcipher);
-- rctx->cryptlen = req->nbytes;
--
-- diff_dst = (req->src != req->dst) ? true : false;
-- dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-- dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
--
-- rctx->src_nents = sg_nents_for_len(req->src, req->nbytes);
-- if (diff_dst)
-- rctx->dst_nents = sg_nents_for_len(req->dst, req->nbytes);
-- else
-- rctx->dst_nents = rctx->src_nents;
-- if (rctx->src_nents < 0) {
-- dev_err(qce->dev, "Invalid numbers of src SG.\n");
-- return rctx->src_nents;
-- }
-- if (rctx->dst_nents < 0) {
-- dev_err(qce->dev, "Invalid numbers of dst SG.\n");
-- return -rctx->dst_nents;
-- }
--
-- rctx->dst_nents += 1;
--
-- gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
-- GFP_KERNEL : GFP_ATOMIC;
--
-- ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
-- if (ret)
-- return ret;
--
-- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
--
-- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
-- if (IS_ERR(sg)) {
-- ret = PTR_ERR(sg);
-- goto error_free;
-- }
--
-- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
-- if (IS_ERR(sg)) {
-- ret = PTR_ERR(sg);
-- goto error_free;
-- }
--
-- sg_mark_end(sg);
-- rctx->dst_sg = rctx->dst_tbl.sgl;
--
-- ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-- if (ret < 0)
-- goto error_free;
--
-- if (diff_dst) {
-- ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-- if (ret < 0)
-- goto error_unmap_dst;
-- rctx->src_sg = req->src;
-- } else {
-- rctx->src_sg = rctx->dst_sg;
-- }
--
-- ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
-- rctx->dst_sg, rctx->dst_nents,
-- qce_ablkcipher_done, async_req);
-- if (ret)
-- goto error_unmap_src;
--
-- qce_dma_issue_pending(&qce->dma);
--
-- ret = qce_start(async_req, tmpl->crypto_alg_type, req->nbytes, 0);
-- if (ret)
-- goto error_terminate;
--
-- return 0;
--
--error_terminate:
-- qce_dma_terminate_all(&qce->dma);
--error_unmap_src:
-- if (diff_dst)
-- dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
--error_unmap_dst:
-- dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
--error_free:
-- sg_free_table(&rctx->dst_tbl);
-- return ret;
--}
--
--static int qce_ablkcipher_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
-- unsigned int keylen)
--{
-- struct crypto_tfm *tfm = crypto_ablkcipher_tfm(ablk);
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-- int ret;
--
-- if (!key || !keylen)
-- return -EINVAL;
--
-- switch (keylen) {
-- case AES_KEYSIZE_128:
-- case AES_KEYSIZE_256:
-- break;
-- default:
-- goto fallback;
-- }
--
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--fallback:
-- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
-- if (!ret)
-- ctx->enc_keylen = keylen;
-- return ret;
--}
--
--static int qce_des_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
-- unsigned int keylen)
--{
-- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk);
-- int err;
--
-- err = verify_ablkcipher_des_key(ablk, key);
-- if (err)
-- return err;
--
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--}
--
--static int qce_des3_setkey(struct crypto_ablkcipher *ablk, const u8 *key,
-- unsigned int keylen)
--{
-- struct qce_cipher_ctx *ctx = crypto_ablkcipher_ctx(ablk);
-- int err;
--
-- err = verify_ablkcipher_des3_key(ablk, key);
-- if (err)
-- return err;
--
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--}
--
--static int qce_ablkcipher_crypt(struct ablkcipher_request *req, int encrypt)
--{
-- struct crypto_tfm *tfm =
-- crypto_ablkcipher_tfm(crypto_ablkcipher_reqtfm(req));
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-- struct qce_cipher_reqctx *rctx = ablkcipher_request_ctx(req);
-- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
-- int ret;
--
-- rctx->flags = tmpl->alg_flags;
-- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
--
-- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
-- ctx->enc_keylen != AES_KEYSIZE_256) {
-- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
--
-- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
-- skcipher_request_set_callback(subreq, req->base.flags,
-- NULL, NULL);
-- skcipher_request_set_crypt(subreq, req->src, req->dst,
-- req->nbytes, req->info);
-- ret = encrypt ? crypto_skcipher_encrypt(subreq) :
-- crypto_skcipher_decrypt(subreq);
-- skcipher_request_zero(subreq);
-- return ret;
-- }
--
-- return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
--}
--
--static int qce_ablkcipher_encrypt(struct ablkcipher_request *req)
--{
-- return qce_ablkcipher_crypt(req, 1);
--}
--
--static int qce_ablkcipher_decrypt(struct ablkcipher_request *req)
--{
-- return qce_ablkcipher_crypt(req, 0);
--}
--
--static int qce_ablkcipher_init(struct crypto_tfm *tfm)
--{
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
--
-- memset(ctx, 0, sizeof(*ctx));
-- tfm->crt_ablkcipher.reqsize = sizeof(struct qce_cipher_reqctx);
--
-- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(tfm),
-- 0, CRYPTO_ALG_NEED_FALLBACK);
-- return PTR_ERR_OR_ZERO(ctx->fallback);
--}
--
--static void qce_ablkcipher_exit(struct crypto_tfm *tfm)
--{
-- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
--
-- crypto_free_sync_skcipher(ctx->fallback);
--}
--
--struct qce_ablkcipher_def {
-- unsigned long flags;
-- const char *name;
-- const char *drv_name;
-- unsigned int blocksize;
-- unsigned int ivsize;
-- unsigned int min_keysize;
-- unsigned int max_keysize;
--};
--
--static const struct qce_ablkcipher_def ablkcipher_def[] = {
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_ECB,
-- .name = "ecb(aes)",
-- .drv_name = "ecb-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_CBC,
-- .name = "cbc(aes)",
-- .drv_name = "cbc-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_CTR,
-- .name = "ctr(aes)",
-- .drv_name = "ctr-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_AES | QCE_MODE_XTS,
-- .name = "xts(aes)",
-- .drv_name = "xts-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_DES | QCE_MODE_ECB,
-- .name = "ecb(des)",
-- .drv_name = "ecb-des-qce",
-- .blocksize = DES_BLOCK_SIZE,
-- .ivsize = 0,
-- .min_keysize = DES_KEY_SIZE,
-- .max_keysize = DES_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_DES | QCE_MODE_CBC,
-- .name = "cbc(des)",
-- .drv_name = "cbc-des-qce",
-- .blocksize = DES_BLOCK_SIZE,
-- .ivsize = DES_BLOCK_SIZE,
-- .min_keysize = DES_KEY_SIZE,
-- .max_keysize = DES_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_3DES | QCE_MODE_ECB,
-- .name = "ecb(des3_ede)",
-- .drv_name = "ecb-3des-qce",
-- .blocksize = DES3_EDE_BLOCK_SIZE,
-- .ivsize = 0,
-- .min_keysize = DES3_EDE_KEY_SIZE,
-- .max_keysize = DES3_EDE_KEY_SIZE,
-- },
-- {
-- .flags = QCE_ALG_3DES | QCE_MODE_CBC,
-- .name = "cbc(des3_ede)",
-- .drv_name = "cbc-3des-qce",
-- .blocksize = DES3_EDE_BLOCK_SIZE,
-- .ivsize = DES3_EDE_BLOCK_SIZE,
-- .min_keysize = DES3_EDE_KEY_SIZE,
-- .max_keysize = DES3_EDE_KEY_SIZE,
-- },
--};
--
--static int qce_ablkcipher_register_one(const struct qce_ablkcipher_def *def,
-- struct qce_device *qce)
--{
-- struct qce_alg_template *tmpl;
-- struct crypto_alg *alg;
-- int ret;
--
-- tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
-- if (!tmpl)
-- return -ENOMEM;
--
-- alg = &tmpl->alg.crypto;
--
-- snprintf(alg->cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
-- snprintf(alg->cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
-- def->drv_name);
--
-- alg->cra_blocksize = def->blocksize;
-- alg->cra_ablkcipher.ivsize = def->ivsize;
-- alg->cra_ablkcipher.min_keysize = def->min_keysize;
-- alg->cra_ablkcipher.max_keysize = def->max_keysize;
-- alg->cra_ablkcipher.setkey = IS_3DES(def->flags) ? qce_des3_setkey :
-- IS_DES(def->flags) ? qce_des_setkey :
-- qce_ablkcipher_setkey;
-- alg->cra_ablkcipher.encrypt = qce_ablkcipher_encrypt;
-- alg->cra_ablkcipher.decrypt = qce_ablkcipher_decrypt;
--
-- alg->cra_priority = 300;
-- alg->cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER | CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK | CRYPTO_ALG_KERN_DRIVER_ONLY;
-- alg->cra_ctxsize = sizeof(struct qce_cipher_ctx);
-- alg->cra_alignmask = 0;
-- alg->cra_type = &crypto_ablkcipher_type;
-- alg->cra_module = THIS_MODULE;
-- alg->cra_init = qce_ablkcipher_init;
-- alg->cra_exit = qce_ablkcipher_exit;
--
-- INIT_LIST_HEAD(&tmpl->entry);
-- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_ABLKCIPHER;
-- tmpl->alg_flags = def->flags;
-- tmpl->qce = qce;
--
-- ret = crypto_register_alg(alg);
-- if (ret) {
-- kfree(tmpl);
-- dev_err(qce->dev, "%s registration failed\n", alg->cra_name);
-- return ret;
-- }
--
-- list_add_tail(&tmpl->entry, &ablkcipher_algs);
-- dev_dbg(qce->dev, "%s is registered\n", alg->cra_name);
-- return 0;
--}
--
--static void qce_ablkcipher_unregister(struct qce_device *qce)
--{
-- struct qce_alg_template *tmpl, *n;
--
-- list_for_each_entry_safe(tmpl, n, &ablkcipher_algs, entry) {
-- crypto_unregister_alg(&tmpl->alg.crypto);
-- list_del(&tmpl->entry);
-- kfree(tmpl);
-- }
--}
--
--static int qce_ablkcipher_register(struct qce_device *qce)
--{
-- int ret, i;
--
-- for (i = 0; i < ARRAY_SIZE(ablkcipher_def); i++) {
-- ret = qce_ablkcipher_register_one(&ablkcipher_def[i], qce);
-- if (ret)
-- goto err;
-- }
--
-- return 0;
--err:
-- qce_ablkcipher_unregister(qce);
-- return ret;
--}
--
--const struct qce_algo_ops ablkcipher_ops = {
-- .type = CRYPTO_ALG_TYPE_ABLKCIPHER,
-- .register_algs = qce_ablkcipher_register,
-- .unregister_algs = qce_ablkcipher_unregister,
-- .async_req_handle = qce_ablkcipher_async_req_handle,
--};
---- /dev/null
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -0,0 +1,440 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/interrupt.h>
-+#include <linux/types.h>
-+#include <crypto/aes.h>
-+#include <crypto/internal/des.h>
-+#include <crypto/internal/skcipher.h>
-+
-+#include "cipher.h"
-+
-+static LIST_HEAD(skcipher_algs);
-+
-+static void qce_skcipher_done(void *data)
-+{
-+ struct crypto_async_request *async_req = data;
-+ struct skcipher_request *req = skcipher_request_cast(async_req);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
-+ struct qce_device *qce = tmpl->qce;
-+ enum dma_data_direction dir_src, dir_dst;
-+ u32 status;
-+ int error;
-+ bool diff_dst;
-+
-+ diff_dst = (req->src != req->dst) ? true : false;
-+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
-+
-+ error = qce_dma_terminate_all(&qce->dma);
-+ if (error)
-+ dev_dbg(qce->dev, "skcipher dma termination error (%d)\n",
-+ error);
-+
-+ if (diff_dst)
-+ dma_unmap_sg(qce->dev, rctx->src_sg, rctx->src_nents, dir_src);
-+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-+
-+ sg_free_table(&rctx->dst_tbl);
-+
-+ error = qce_check_status(qce, &status);
-+ if (error < 0)
-+ dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
-+
-+ qce->async_req_done(tmpl->qce, error);
-+}
-+
-+static int
-+qce_skcipher_async_req_handle(struct crypto_async_request *async_req)
-+{
-+ struct skcipher_request *req = skcipher_request_cast(async_req);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
-+ struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
-+ struct qce_device *qce = tmpl->qce;
-+ enum dma_data_direction dir_src, dir_dst;
-+ struct scatterlist *sg;
-+ bool diff_dst;
-+ gfp_t gfp;
-+ int ret;
-+
-+ rctx->iv = req->iv;
-+ rctx->ivsize = crypto_skcipher_ivsize(skcipher);
-+ rctx->cryptlen = req->cryptlen;
-+
-+ diff_dst = (req->src != req->dst) ? true : false;
-+ dir_src = diff_dst ? DMA_TO_DEVICE : DMA_BIDIRECTIONAL;
-+ dir_dst = diff_dst ? DMA_FROM_DEVICE : DMA_BIDIRECTIONAL;
-+
-+ rctx->src_nents = sg_nents_for_len(req->src, req->cryptlen);
-+ if (diff_dst)
-+ rctx->dst_nents = sg_nents_for_len(req->dst, req->cryptlen);
-+ else
-+ rctx->dst_nents = rctx->src_nents;
-+ if (rctx->src_nents < 0) {
-+ dev_err(qce->dev, "Invalid numbers of src SG.\n");
-+ return rctx->src_nents;
-+ }
-+ if (rctx->dst_nents < 0) {
-+ dev_err(qce->dev, "Invalid numbers of dst SG.\n");
-+ return -rctx->dst_nents;
-+ }
-+
-+ rctx->dst_nents += 1;
-+
-+ gfp = (req->base.flags & CRYPTO_TFM_REQ_MAY_SLEEP) ?
-+ GFP_KERNEL : GFP_ATOMIC;
-+
-+ ret = sg_alloc_table(&rctx->dst_tbl, rctx->dst_nents, gfp);
-+ if (ret)
-+ return ret;
-+
-+ sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
-+
-+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
-+ if (IS_ERR(sg)) {
-+ ret = PTR_ERR(sg);
-+ goto error_free;
-+ }
-+
-+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
-+ if (IS_ERR(sg)) {
-+ ret = PTR_ERR(sg);
-+ goto error_free;
-+ }
-+
-+ sg_mark_end(sg);
-+ rctx->dst_sg = rctx->dst_tbl.sgl;
-+
-+ ret = dma_map_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-+ if (ret < 0)
-+ goto error_free;
-+
-+ if (diff_dst) {
-+ ret = dma_map_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-+ if (ret < 0)
-+ goto error_unmap_dst;
-+ rctx->src_sg = req->src;
-+ } else {
-+ rctx->src_sg = rctx->dst_sg;
-+ }
-+
-+ ret = qce_dma_prep_sgs(&qce->dma, rctx->src_sg, rctx->src_nents,
-+ rctx->dst_sg, rctx->dst_nents,
-+ qce_skcipher_done, async_req);
-+ if (ret)
-+ goto error_unmap_src;
-+
-+ qce_dma_issue_pending(&qce->dma);
-+
-+ ret = qce_start(async_req, tmpl->crypto_alg_type, req->cryptlen, 0);
-+ if (ret)
-+ goto error_terminate;
-+
-+ return 0;
-+
-+error_terminate:
-+ qce_dma_terminate_all(&qce->dma);
-+error_unmap_src:
-+ if (diff_dst)
-+ dma_unmap_sg(qce->dev, req->src, rctx->src_nents, dir_src);
-+error_unmap_dst:
-+ dma_unmap_sg(qce->dev, rctx->dst_sg, rctx->dst_nents, dir_dst);
-+error_free:
-+ sg_free_table(&rctx->dst_tbl);
-+ return ret;
-+}
-+
-+static int qce_skcipher_setkey(struct crypto_skcipher *ablk, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk);
-+ struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-+ int ret;
-+
-+ if (!key || !keylen)
-+ return -EINVAL;
-+
-+ switch (keylen) {
-+ case AES_KEYSIZE_128:
-+ case AES_KEYSIZE_256:
-+ break;
-+ default:
-+ goto fallback;
-+ }
-+
-+ ctx->enc_keylen = keylen;
-+ memcpy(ctx->enc_key, key, keylen);
-+ return 0;
-+fallback:
-+ ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
-+ if (!ret)
-+ ctx->enc_keylen = keylen;
-+ return ret;
-+}
-+
-+static int qce_des_setkey(struct crypto_skcipher *ablk, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk);
-+ int err;
-+
-+ err = verify_skcipher_des_key(ablk, key);
-+ if (err)
-+ return err;
-+
-+ ctx->enc_keylen = keylen;
-+ memcpy(ctx->enc_key, key, keylen);
-+ return 0;
-+}
-+
-+static int qce_des3_setkey(struct crypto_skcipher *ablk, const u8 *key,
-+ unsigned int keylen)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(ablk);
-+ int err;
-+
-+ err = verify_skcipher_des3_key(ablk, key);
-+ if (err)
-+ return err;
-+
-+ ctx->enc_keylen = keylen;
-+ memcpy(ctx->enc_key, key, keylen);
-+ return 0;
-+}
-+
-+static int qce_skcipher_crypt(struct skcipher_request *req, int encrypt)
-+{
-+ struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(req);
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-+ struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
-+ struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
-+ int ret;
-+
-+ rctx->flags = tmpl->alg_flags;
-+ rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
-+
-+ if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
-+ ctx->enc_keylen != AES_KEYSIZE_256) {
-+ SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-+
-+ skcipher_request_set_sync_tfm(subreq, ctx->fallback);
-+ skcipher_request_set_callback(subreq, req->base.flags,
-+ NULL, NULL);
-+ skcipher_request_set_crypt(subreq, req->src, req->dst,
-+ req->cryptlen, req->iv);
-+ ret = encrypt ? crypto_skcipher_encrypt(subreq) :
-+ crypto_skcipher_decrypt(subreq);
-+ skcipher_request_zero(subreq);
-+ return ret;
-+ }
-+
-+ return tmpl->qce->async_req_enqueue(tmpl->qce, &req->base);
-+}
-+
-+static int qce_skcipher_encrypt(struct skcipher_request *req)
-+{
-+ return qce_skcipher_crypt(req, 1);
-+}
-+
-+static int qce_skcipher_decrypt(struct skcipher_request *req)
-+{
-+ return qce_skcipher_crypt(req, 0);
-+}
-+
-+static int qce_skcipher_init(struct crypto_skcipher *tfm)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-+
-+ memset(ctx, 0, sizeof(*ctx));
-+ crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
-+
-+ ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base),
-+ 0, CRYPTO_ALG_NEED_FALLBACK);
-+ return PTR_ERR_OR_ZERO(ctx->fallback);
-+}
-+
-+static void qce_skcipher_exit(struct crypto_skcipher *tfm)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-+
-+ crypto_free_sync_skcipher(ctx->fallback);
-+}
-+
-+struct qce_skcipher_def {
-+ unsigned long flags;
-+ const char *name;
-+ const char *drv_name;
-+ unsigned int blocksize;
-+ unsigned int ivsize;
-+ unsigned int min_keysize;
-+ unsigned int max_keysize;
-+};
-+
-+static const struct qce_skcipher_def skcipher_def[] = {
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_ECB,
-+ .name = "ecb(aes)",
-+ .drv_name = "ecb-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_CBC,
-+ .name = "cbc(aes)",
-+ .drv_name = "cbc-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_CTR,
-+ .name = "ctr(aes)",
-+ .drv_name = "ctr-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_AES | QCE_MODE_XTS,
-+ .name = "xts(aes)",
-+ .drv_name = "xts-aes-qce",
-+ .blocksize = AES_BLOCK_SIZE,
-+ .ivsize = AES_BLOCK_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE,
-+ .max_keysize = AES_MAX_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_DES | QCE_MODE_ECB,
-+ .name = "ecb(des)",
-+ .drv_name = "ecb-des-qce",
-+ .blocksize = DES_BLOCK_SIZE,
-+ .ivsize = 0,
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_DES | QCE_MODE_CBC,
-+ .name = "cbc(des)",
-+ .drv_name = "cbc-des-qce",
-+ .blocksize = DES_BLOCK_SIZE,
-+ .ivsize = DES_BLOCK_SIZE,
-+ .min_keysize = DES_KEY_SIZE,
-+ .max_keysize = DES_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_3DES | QCE_MODE_ECB,
-+ .name = "ecb(des3_ede)",
-+ .drv_name = "ecb-3des-qce",
-+ .blocksize = DES3_EDE_BLOCK_SIZE,
-+ .ivsize = 0,
-+ .min_keysize = DES3_EDE_KEY_SIZE,
-+ .max_keysize = DES3_EDE_KEY_SIZE,
-+ },
-+ {
-+ .flags = QCE_ALG_3DES | QCE_MODE_CBC,
-+ .name = "cbc(des3_ede)",
-+ .drv_name = "cbc-3des-qce",
-+ .blocksize = DES3_EDE_BLOCK_SIZE,
-+ .ivsize = DES3_EDE_BLOCK_SIZE,
-+ .min_keysize = DES3_EDE_KEY_SIZE,
-+ .max_keysize = DES3_EDE_KEY_SIZE,
-+ },
-+};
-+
-+static int qce_skcipher_register_one(const struct qce_skcipher_def *def,
-+ struct qce_device *qce)
-+{
-+ struct qce_alg_template *tmpl;
-+ struct skcipher_alg *alg;
-+ int ret;
-+
-+ tmpl = kzalloc(sizeof(*tmpl), GFP_KERNEL);
-+ if (!tmpl)
-+ return -ENOMEM;
-+
-+ alg = &tmpl->alg.skcipher;
-+
-+ snprintf(alg->base.cra_name, CRYPTO_MAX_ALG_NAME, "%s", def->name);
-+ snprintf(alg->base.cra_driver_name, CRYPTO_MAX_ALG_NAME, "%s",
-+ def->drv_name);
-+
-+ alg->base.cra_blocksize = def->blocksize;
-+ alg->ivsize = def->ivsize;
-+ alg->min_keysize = def->min_keysize;
-+ alg->max_keysize = def->max_keysize;
-+ alg->setkey = IS_3DES(def->flags) ? qce_des3_setkey :
-+ IS_DES(def->flags) ? qce_des_setkey :
-+ qce_skcipher_setkey;
-+ alg->encrypt = qce_skcipher_encrypt;
-+ alg->decrypt = qce_skcipher_decrypt;
-+
-+ alg->base.cra_priority = 300;
-+ alg->base.cra_flags = CRYPTO_ALG_ASYNC |
-+ CRYPTO_ALG_NEED_FALLBACK |
-+ CRYPTO_ALG_KERN_DRIVER_ONLY;
-+ alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
-+ alg->base.cra_alignmask = 0;
-+ alg->base.cra_module = THIS_MODULE;
-+
-+ alg->init = qce_skcipher_init;
-+ alg->exit = qce_skcipher_exit;
-+
-+ INIT_LIST_HEAD(&tmpl->entry);
-+ tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;
-+ tmpl->alg_flags = def->flags;
-+ tmpl->qce = qce;
-+
-+ ret = crypto_register_skcipher(alg);
-+ if (ret) {
-+ kfree(tmpl);
-+ dev_err(qce->dev, "%s registration failed\n", alg->base.cra_name);
-+ return ret;
-+ }
-+
-+ list_add_tail(&tmpl->entry, &skcipher_algs);
-+ dev_dbg(qce->dev, "%s is registered\n", alg->base.cra_name);
-+ return 0;
-+}
-+
-+static void qce_skcipher_unregister(struct qce_device *qce)
-+{
-+ struct qce_alg_template *tmpl, *n;
-+
-+ list_for_each_entry_safe(tmpl, n, &skcipher_algs, entry) {
-+ crypto_unregister_skcipher(&tmpl->alg.skcipher);
-+ list_del(&tmpl->entry);
-+ kfree(tmpl);
-+ }
-+}
-+
-+static int qce_skcipher_register(struct qce_device *qce)
-+{
-+ int ret, i;
-+
-+ for (i = 0; i < ARRAY_SIZE(skcipher_def); i++) {
-+ ret = qce_skcipher_register_one(&skcipher_def[i], qce);
-+ if (ret)
-+ goto err;
-+ }
-+
-+ return 0;
-+err:
-+ qce_skcipher_unregister(qce);
-+ return ret;
-+}
-+
-+const struct qce_algo_ops skcipher_ops = {
-+ .type = CRYPTO_ALG_TYPE_SKCIPHER,
-+ .register_algs = qce_skcipher_register,
-+ .unregister_algs = qce_skcipher_unregister,
-+ .async_req_handle = qce_skcipher_async_req_handle,
-+};
+++ /dev/null
-From bb5c863b3d3cbd10e80b2ebf409934a091058f54 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 20 Dec 2019 16:02:13 -0300
-Subject: [PATCH 02/11] crypto: qce - fix ctr-aes-qce block, chunk sizes
-
-Set blocksize of ctr-aes-qce to 1, so it can operate as a stream cipher,
-adding the definition for chucksize instead, where the underlying block
-size belongs.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -270,6 +270,7 @@ struct qce_skcipher_def {
- const char *name;
- const char *drv_name;
- unsigned int blocksize;
-+ unsigned int chunksize;
- unsigned int ivsize;
- unsigned int min_keysize;
- unsigned int max_keysize;
-@@ -298,7 +299,8 @@ static const struct qce_skcipher_def skc
- .flags = QCE_ALG_AES | QCE_MODE_CTR,
- .name = "ctr(aes)",
- .drv_name = "ctr-aes-qce",
-- .blocksize = AES_BLOCK_SIZE,
-+ .blocksize = 1,
-+ .chunksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
- .min_keysize = AES_MIN_KEY_SIZE,
- .max_keysize = AES_MAX_KEY_SIZE,
-@@ -368,6 +370,7 @@ static int qce_skcipher_register_one(con
- def->drv_name);
-
- alg->base.cra_blocksize = def->blocksize;
-+ alg->chunksize = def->chunksize;
- alg->ivsize = def->ivsize;
- alg->min_keysize = def->min_keysize;
- alg->max_keysize = def->max_keysize;
+++ /dev/null
-From 7de4c2bd196f111e39cc60f6197654aff23ba2b4 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 20 Dec 2019 16:02:14 -0300
-Subject: [PATCH 03/11] crypto: qce - fix xts-aes-qce key sizes
-
-XTS-mode uses two keys, so the keysizes should be doubled in
-skcipher_def, and halved when checking if it is AES-128/192/256.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 13 ++++++++-----
- 1 file changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -154,12 +154,13 @@ static int qce_skcipher_setkey(struct cr
- {
- struct crypto_tfm *tfm = crypto_skcipher_tfm(ablk);
- struct qce_cipher_ctx *ctx = crypto_tfm_ctx(tfm);
-+ unsigned long flags = to_cipher_tmpl(ablk)->alg_flags;
- int ret;
-
- if (!key || !keylen)
- return -EINVAL;
-
-- switch (keylen) {
-+ switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
- case AES_KEYSIZE_128:
- case AES_KEYSIZE_256:
- break;
-@@ -213,13 +214,15 @@ static int qce_skcipher_crypt(struct skc
- struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
- struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
- struct qce_alg_template *tmpl = to_cipher_tmpl(tfm);
-+ int keylen;
- int ret;
-
- rctx->flags = tmpl->alg_flags;
- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
-+ keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
-
-- if (IS_AES(rctx->flags) && ctx->enc_keylen != AES_KEYSIZE_128 &&
-- ctx->enc_keylen != AES_KEYSIZE_256) {
-+ if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
-+ keylen != AES_KEYSIZE_256) {
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-
- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
-@@ -311,8 +314,8 @@ static const struct qce_skcipher_def skc
- .drv_name = "xts-aes-qce",
- .blocksize = AES_BLOCK_SIZE,
- .ivsize = AES_BLOCK_SIZE,
-- .min_keysize = AES_MIN_KEY_SIZE,
-- .max_keysize = AES_MAX_KEY_SIZE,
-+ .min_keysize = AES_MIN_KEY_SIZE * 2,
-+ .max_keysize = AES_MAX_KEY_SIZE * 2,
- },
- {
- .flags = QCE_ALG_DES | QCE_MODE_ECB,
+++ /dev/null
-From 3ee50c896d712dc2fc8f34c2cd1918d035e74045 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 20 Dec 2019 16:02:15 -0300
-Subject: [PATCH 04/11] crypto: qce - save a sg table slot for result buf
-
-When ctr-aes-qce is used for gcm-mode, an extra sg entry for the
-authentication tag is present, causing trouble when the qce driver
-prepares the dst-results sg table for dma.
-
-It computes the number of entries needed with sg_nents_for_len, leaving
-out the tag entry. Then it creates a sg table with that number plus
-one, used to store a result buffer.
-
-When copying the sg table, there's no limit to the number of entries
-copied, so the extra slot is filled with the authentication tag sg.
-When the driver tries to add the result sg, the list is full, and it
-returns EINVAL.
-
-By limiting the number of sg entries copied to the dest table, the slot
-for the result buffer is guaranteed to be unused.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/qce/dma.c | 6 ++++--
- drivers/crypto/qce/dma.h | 3 ++-
- drivers/crypto/qce/skcipher.c | 4 ++--
- 3 files changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/crypto/qce/dma.c
-+++ b/drivers/crypto/qce/dma.c
-@@ -47,7 +47,8 @@ void qce_dma_release(struct qce_dma_data
- }
-
- struct scatterlist *
--qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl)
-+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
-+ int max_ents)
- {
- struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
-
-@@ -60,12 +61,13 @@ qce_sgtable_add(struct sg_table *sgt, st
- if (!sg)
- return ERR_PTR(-EINVAL);
-
-- while (new_sgl && sg) {
-+ while (new_sgl && sg && max_ents) {
- sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
- new_sgl->offset);
- sg_last = sg;
- sg = sg_next(sg);
- new_sgl = sg_next(new_sgl);
-+ max_ents--;
- }
-
- return sg_last;
---- a/drivers/crypto/qce/dma.h
-+++ b/drivers/crypto/qce/dma.h
-@@ -42,6 +42,7 @@ int qce_dma_prep_sgs(struct qce_dma_data
- void qce_dma_issue_pending(struct qce_dma_data *dma);
- int qce_dma_terminate_all(struct qce_dma_data *dma);
- struct scatterlist *
--qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add);
-+qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
-+ int max_ents);
-
- #endif /* _DMA_H_ */
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -95,13 +95,13 @@ qce_skcipher_async_req_handle(struct cry
-
- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
- }
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
+++ /dev/null
-From 3e806a12d10af2581aa26c37b58439286eab9782 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 20 Dec 2019 16:02:16 -0300
-Subject: [PATCH 05/11] crypto: qce - update the skcipher IV
-
-Update the IV after the completion of each cipher operation.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -21,6 +21,7 @@ static void qce_skcipher_done(void *data
- struct qce_cipher_reqctx *rctx = skcipher_request_ctx(req);
- struct qce_alg_template *tmpl = to_cipher_tmpl(crypto_skcipher_reqtfm(req));
- struct qce_device *qce = tmpl->qce;
-+ struct qce_result_dump *result_buf = qce->dma.result_buf;
- enum dma_data_direction dir_src, dir_dst;
- u32 status;
- int error;
-@@ -45,6 +46,7 @@ static void qce_skcipher_done(void *data
- if (error < 0)
- dev_dbg(qce->dev, "skcipher operation error (%x)\n", status);
-
-+ memcpy(rctx->iv, result_buf->encr_cntr_iv, rctx->ivsize);
- qce->async_req_done(tmpl->qce, error);
- }
-
+++ /dev/null
-From 8ceda883205db6dfedb82e39f67feae3b50c95a1 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 20 Dec 2019 16:02:17 -0300
-Subject: [PATCH 06/11] crypto: qce - initialize fallback only for AES
-
-Adjust cra_flags to add CRYPTO_NEED_FALLBACK only for AES ciphers, where
-AES-192 is not handled by the qce hardware, and don't allocate & free
-the fallback skcipher for other algorithms.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/qce/skcipher.c | 17 ++++++++++++++---
- 1 file changed, 14 insertions(+), 3 deletions(-)
-
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -257,7 +257,14 @@ static int qce_skcipher_init(struct cryp
-
- memset(ctx, 0, sizeof(*ctx));
- crypto_skcipher_set_reqsize(tfm, sizeof(struct qce_cipher_reqctx));
-+ return 0;
-+}
-+
-+static int qce_skcipher_init_fallback(struct crypto_skcipher *tfm)
-+{
-+ struct qce_cipher_ctx *ctx = crypto_skcipher_ctx(tfm);
-
-+ qce_skcipher_init(tfm);
- ctx->fallback = crypto_alloc_sync_skcipher(crypto_tfm_alg_name(&tfm->base),
- 0, CRYPTO_ALG_NEED_FALLBACK);
- return PTR_ERR_OR_ZERO(ctx->fallback);
-@@ -387,14 +394,18 @@ static int qce_skcipher_register_one(con
-
- alg->base.cra_priority = 300;
- alg->base.cra_flags = CRYPTO_ALG_ASYNC |
-- CRYPTO_ALG_NEED_FALLBACK |
- CRYPTO_ALG_KERN_DRIVER_ONLY;
- alg->base.cra_ctxsize = sizeof(struct qce_cipher_ctx);
- alg->base.cra_alignmask = 0;
- alg->base.cra_module = THIS_MODULE;
-
-- alg->init = qce_skcipher_init;
-- alg->exit = qce_skcipher_exit;
-+ if (IS_AES(def->flags)) {
-+ alg->base.cra_flags |= CRYPTO_ALG_NEED_FALLBACK;
-+ alg->init = qce_skcipher_init_fallback;
-+ alg->exit = qce_skcipher_exit;
-+ } else {
-+ alg->init = qce_skcipher_init;
-+ }
-
- INIT_LIST_HEAD(&tmpl->entry);
- tmpl->crypto_alg_type = CRYPTO_ALG_TYPE_SKCIPHER;
+++ /dev/null
-From d6364b8128439a8c0e381f80c38667de9f15eef8 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 7 Feb 2020 12:02:25 -0300
-Subject: [PATCH 09/11] crypto: qce - use cryptlen when adding extra sgl
-
-The qce crypto driver appends an extra entry to the dst sgl, to maintain
-private state information.
-
-When the gcm driver sends requests to the ctr skcipher, it passes the
-authentication tag after the actual crypto payload, but it must not be
-touched.
-
-Commit 1336c2221bee ("crypto: qce - save a sg table slot for result
-buf") limited the destination sgl to avoid overwriting the
-authentication tag but it assumed the tag would be in a separate sgl
-entry.
-
-This is not always the case, so it is better to limit the length of the
-destination buffer to req->cryptlen before appending the result buf.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/qce/dma.c | 11 ++++++-----
- drivers/crypto/qce/dma.h | 2 +-
- drivers/crypto/qce/skcipher.c | 5 +++--
- 3 files changed, 10 insertions(+), 8 deletions(-)
-
---- a/drivers/crypto/qce/dma.c
-+++ b/drivers/crypto/qce/dma.c
-@@ -48,9 +48,10 @@ void qce_dma_release(struct qce_dma_data
-
- struct scatterlist *
- qce_sgtable_add(struct sg_table *sgt, struct scatterlist *new_sgl,
-- int max_ents)
-+ unsigned int max_len)
- {
- struct scatterlist *sg = sgt->sgl, *sg_last = NULL;
-+ unsigned int new_len;
-
- while (sg) {
- if (!sg_page(sg))
-@@ -61,13 +62,13 @@ qce_sgtable_add(struct sg_table *sgt, st
- if (!sg)
- return ERR_PTR(-EINVAL);
-
-- while (new_sgl && sg && max_ents) {
-- sg_set_page(sg, sg_page(new_sgl), new_sgl->length,
-- new_sgl->offset);
-+ while (new_sgl && sg && max_len) {
-+ new_len = new_sgl->length > max_len ? max_len : new_sgl->length;
-+ sg_set_page(sg, sg_page(new_sgl), new_len, new_sgl->offset);
- sg_last = sg;
- sg = sg_next(sg);
- new_sgl = sg_next(new_sgl);
-- max_ents--;
-+ max_len -= new_len;
- }
-
- return sg_last;
---- a/drivers/crypto/qce/dma.h
-+++ b/drivers/crypto/qce/dma.h
-@@ -43,6 +43,6 @@ void qce_dma_issue_pending(struct qce_dm
- int qce_dma_terminate_all(struct qce_dma_data *dma);
- struct scatterlist *
- qce_sgtable_add(struct sg_table *sgt, struct scatterlist *sg_add,
-- int max_ents);
-+ unsigned int max_len);
-
- #endif /* _DMA_H_ */
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -97,13 +97,14 @@ qce_skcipher_async_req_handle(struct cry
-
- sg_init_one(&rctx->result_sg, qce->dma.result_buf, QCE_RESULT_BUF_SZ);
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, rctx->dst_nents - 1);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, req->dst, req->cryptlen);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
- }
-
-- sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg, 1);
-+ sg = qce_sgtable_add(&rctx->dst_tbl, &rctx->result_sg,
-+ QCE_RESULT_BUF_SZ);
- if (IS_ERR(sg)) {
- ret = PTR_ERR(sg);
- goto error_free;
+++ /dev/null
-From ce163ba0bf298f1707321ac025ef639f88e62801 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 7 Feb 2020 12:02:26 -0300
-Subject: [PATCH 10/11] crypto: qce - use AES fallback for small requests
-
-Process small blocks using the fallback cipher, as a workaround for an
-observed failure (DMA-related, apparently) when computing the GCM ghash
-key. This brings a speed gain as well, since it avoids the latency of
-using the hardware engine to process small blocks.
-
-Using software for all 16-byte requests would be enough to make GCM
-work, but to increase performance, a larger threshold would be better.
-Measuring the performance of supported ciphers with openssl speed,
-software matches hardware at around 768-1024 bytes.
-
-Considering the 256-bit ciphers, software is 2-3 times faster than qce
-at 256-bytes, 30% faster at 512, and about even at 768-bytes. With
-128-bit keys, the break-even point would be around 1024-bytes.
-
-This adds the 'aes_sw_max_len' parameter, to set the largest request
-length processed by the software fallback. Its default is being set to
-512 bytes, a little lower than the break-even point, to balance the cost
-in CPU usage.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
-
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -628,6 +628,29 @@ config CRYPTO_DEV_QCE
- hardware. To compile this driver as a module, choose M here. The
- module will be called qcrypto.
-
-+config CRYPTO_DEV_QCE_SW_MAX_LEN
-+ int "Default maximum request size to use software for AES"
-+ depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER
-+ default 512
-+ help
-+ This sets the default maximum request size to perform AES requests
-+ using software instead of the crypto engine. It can be changed by
-+ setting the aes_sw_max_len parameter.
-+
-+ Small blocks are processed faster in software than hardware.
-+ Considering the 256-bit ciphers, software is 2-3 times faster than
-+ qce at 256-bytes, 30% faster at 512, and about even at 768-bytes.
-+ With 128-bit keys, the break-even point would be around 1024-bytes.
-+
-+ The default is set a little lower, to 512 bytes, to balance the
-+ cost in CPU usage. The minimum recommended setting is 16-bytes
-+ (1 AES block), since AES-GCM will fail if you set it lower.
-+ Setting this to zero will send all requests to the hardware.
-+
-+ Note that 192-bit keys are not supported by the hardware and are
-+ always processed by the software fallback, and all DES requests
-+ are done by the hardware.
-+
- config CRYPTO_DEV_QCOM_RNG
- tristate "Qualcomm Random Number Generator Driver"
- depends on ARCH_QCOM || COMPILE_TEST
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -5,6 +5,7 @@
-
- #include <linux/device.h>
- #include <linux/interrupt.h>
-+#include <linux/moduleparam.h>
- #include <linux/types.h>
- #include <crypto/aes.h>
- #include <crypto/internal/des.h>
-@@ -12,6 +13,13 @@
-
- #include "cipher.h"
-
-+static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN;
-+module_param(aes_sw_max_len, uint, 0644);
-+MODULE_PARM_DESC(aes_sw_max_len,
-+ "Only use hardware for AES requests larger than this "
-+ "[0=always use hardware; anything <16 breaks AES-GCM; default="
-+ __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]");
-+
- static LIST_HEAD(skcipher_algs);
-
- static void qce_skcipher_done(void *data)
-@@ -166,15 +174,10 @@ static int qce_skcipher_setkey(struct cr
- switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
- case AES_KEYSIZE_128:
- case AES_KEYSIZE_256:
-+ memcpy(ctx->enc_key, key, keylen);
- break;
-- default:
-- goto fallback;
- }
-
-- ctx->enc_keylen = keylen;
-- memcpy(ctx->enc_key, key, keylen);
-- return 0;
--fallback:
- ret = crypto_sync_skcipher_setkey(ctx->fallback, key, keylen);
- if (!ret)
- ctx->enc_keylen = keylen;
-@@ -224,8 +227,9 @@ static int qce_skcipher_crypt(struct skc
- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
- keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
-
-- if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
-- keylen != AES_KEYSIZE_256) {
-+ if (IS_AES(rctx->flags) &&
-+ ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
-+ req->cryptlen <= aes_sw_max_len)) {
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-
- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
+++ /dev/null
-From 7f19380b2cfd412dcef2facefb3f6c62788864d7 Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 7 Feb 2020 12:02:27 -0300
-Subject: [PATCH 11/11] crypto: qce - handle AES-XTS cases that qce fails
-
-QCE hangs when presented with an AES-XTS request whose length is larger
-than QCE_SECTOR_SIZE (512-bytes), and is not a multiple of it. Let the
-fallback cipher handle them.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
- drivers/crypto/qce/common.c | 2 --
- drivers/crypto/qce/common.h | 3 +++
- drivers/crypto/qce/skcipher.c | 9 +++++++--
- 3 files changed, 10 insertions(+), 4 deletions(-)
-
---- a/drivers/crypto/qce/common.c
-+++ b/drivers/crypto/qce/common.c
-@@ -15,8 +15,6 @@
- #include "regs-v5.h"
- #include "sha.h"
-
--#define QCE_SECTOR_SIZE 512
--
- static inline u32 qce_read(struct qce_device *qce, u32 offset)
- {
- return readl(qce->base + offset);
---- a/drivers/crypto/qce/common.h
-+++ b/drivers/crypto/qce/common.h
-@@ -12,6 +12,9 @@
- #include <crypto/hash.h>
- #include <crypto/internal/skcipher.h>
-
-+/* xts du size */
-+#define QCE_SECTOR_SIZE 512
-+
- /* key size in bytes */
- #define QCE_SHA_HMAC_KEY_SIZE 64
- #define QCE_MAX_CIPHER_KEY_SIZE AES_KEYSIZE_256
---- a/drivers/crypto/qce/skcipher.c
-+++ b/drivers/crypto/qce/skcipher.c
-@@ -227,9 +227,14 @@ static int qce_skcipher_crypt(struct skc
- rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
- keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
-
-+ /* qce is hanging when AES-XTS request len > QCE_SECTOR_SIZE and
-+ * is not a multiple of it; pass such requests to the fallback
-+ */
- if (IS_AES(rctx->flags) &&
-- ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
-- req->cryptlen <= aes_sw_max_len)) {
-+ (((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
-+ req->cryptlen <= aes_sw_max_len) ||
-+ (IS_XTS(rctx->flags) && req->cryptlen > QCE_SECTOR_SIZE &&
-+ req->cryptlen % QCE_SECTOR_SIZE))) {
- SYNC_SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
-
- skcipher_request_set_sync_tfm(subreq, ctx->fallback);
+++ /dev/null
-From 59e056cda4beb5412e3653e6360c2eb0fa770baa Mon Sep 17 00:00:00 2001
-From: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Date: Fri, 20 Dec 2019 16:02:18 -0300
-Subject: [PATCH 07/11] crypto: qce - allow building only hashes/ciphers
-
-Allow the user to choose whether to build support for all algorithms
-(default), hashes-only, or skciphers-only.
-
-The QCE engine does not appear to scale as well as the CPU to handle
-multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
-QCE handles only 2 requests in parallel.
-
-Ipsec throughput seems to improve when disabling either family of
-algorithms, sharing the load with the CPU. Enabling skciphers-only
-appears to work best.
-
-Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
-Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
----
-
---- a/drivers/crypto/Kconfig
-+++ b/drivers/crypto/Kconfig
-@@ -616,6 +616,14 @@ config CRYPTO_DEV_QCE
- tristate "Qualcomm crypto engine accelerator"
- depends on ARCH_QCOM || COMPILE_TEST
- depends on HAS_IOMEM
-+ help
-+ This driver supports Qualcomm crypto engine accelerator
-+ hardware. To compile this driver as a module, choose M here. The
-+ module will be called qcrypto.
-+
-+config CRYPTO_DEV_QCE_SKCIPHER
-+ bool
-+ depends on CRYPTO_DEV_QCE
- select CRYPTO_AES
- select CRYPTO_LIB_DES
- select CRYPTO_ECB
-@@ -623,10 +631,57 @@ config CRYPTO_DEV_QCE
- select CRYPTO_XTS
- select CRYPTO_CTR
- select CRYPTO_BLKCIPHER
-+
-+config CRYPTO_DEV_QCE_SHA
-+ bool
-+ depends on CRYPTO_DEV_QCE
-+
-+choice
-+ prompt "Algorithms enabled for QCE acceleration"
-+ default CRYPTO_DEV_QCE_ENABLE_ALL
-+ depends on CRYPTO_DEV_QCE
- help
-- This driver supports Qualcomm crypto engine accelerator
-- hardware. To compile this driver as a module, choose M here. The
-- module will be called qcrypto.
-+ This option allows to choose whether to build support for all algorihtms
-+ (default), hashes-only, or skciphers-only.
-+
-+ The QCE engine does not appear to scale as well as the CPU to handle
-+ multiple crypto requests. While the ipq40xx chips have 4-core CPUs, the
-+ QCE handles only 2 requests in parallel.
-+
-+ Ipsec throughput seems to improve when disabling either family of
-+ algorithms, sharing the load with the CPU. Enabling skciphers-only
-+ appears to work best.
-+
-+ config CRYPTO_DEV_QCE_ENABLE_ALL
-+ bool "All supported algorithms"
-+ select CRYPTO_DEV_QCE_SKCIPHER
-+ select CRYPTO_DEV_QCE_SHA
-+ help
-+ Enable all supported algorithms:
-+ - AES (CBC, CTR, ECB, XTS)
-+ - 3DES (CBC, ECB)
-+ - DES (CBC, ECB)
-+ - SHA1, HMAC-SHA1
-+ - SHA256, HMAC-SHA256
-+
-+ config CRYPTO_DEV_QCE_ENABLE_SKCIPHER
-+ bool "Symmetric-key ciphers only"
-+ select CRYPTO_DEV_QCE_SKCIPHER
-+ help
-+ Enable symmetric-key ciphers only:
-+ - AES (CBC, CTR, ECB, XTS)
-+ - 3DES (ECB, CBC)
-+ - DES (ECB, CBC)
-+
-+ config CRYPTO_DEV_QCE_ENABLE_SHA
-+ bool "Hash/HMAC only"
-+ select CRYPTO_DEV_QCE_SHA
-+ help
-+ Enable hashes/HMAC algorithms only:
-+ - SHA1, HMAC-SHA1
-+ - SHA256, HMAC-SHA256
-+
-+endchoice
-
- config CRYPTO_DEV_QCE_SW_MAX_LEN
- int "Default maximum request size to use software for AES"
---- a/drivers/crypto/qce/Makefile
-+++ b/drivers/crypto/qce/Makefile
-@@ -2,6 +2,7 @@
- obj-$(CONFIG_CRYPTO_DEV_QCE) += qcrypto.o
- qcrypto-objs := core.o \
- common.o \
-- dma.o \
-- sha.o \
-- skcipher.o
-+ dma.o
-+
-+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SHA) += sha.o
-+qcrypto-$(CONFIG_CRYPTO_DEV_QCE_SKCIPHER) += skcipher.o
---- a/drivers/crypto/qce/common.c
-+++ b/drivers/crypto/qce/common.c
-@@ -43,52 +43,56 @@ qce_clear_array(struct qce_device *qce,
- qce_write(qce, offset + i * sizeof(u32), 0);
- }
-
--static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
-+static u32 qce_config_reg(struct qce_device *qce, int little)
- {
-- u32 cfg = 0;
-+ u32 beats = (qce->burst_size >> 3) - 1;
-+ u32 pipe_pair = qce->pipe_pair_id;
-+ u32 config;
-
-- if (IS_AES(flags)) {
-- if (aes_key_size == AES_KEYSIZE_128)
-- cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
-- else if (aes_key_size == AES_KEYSIZE_256)
-- cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
-- }
-+ config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
-+ config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
-+ BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
-+ config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
-+ config &= ~HIGH_SPD_EN_N_SHIFT;
-
-- if (IS_AES(flags))
-- cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
-- else if (IS_DES(flags) || IS_3DES(flags))
-- cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
-+ if (little)
-+ config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
-
-- if (IS_DES(flags))
-- cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
-+ return config;
-+}
-
-- if (IS_3DES(flags))
-- cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
-+void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
-+{
-+ __be32 *d = dst;
-+ const u8 *s = src;
-+ unsigned int n;
-
-- switch (flags & QCE_MODE_MASK) {
-- case QCE_MODE_ECB:
-- cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_CBC:
-- cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_CTR:
-- cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_XTS:
-- cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
-- break;
-- case QCE_MODE_CCM:
-- cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
-- cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
-- break;
-- default:
-- return ~0;
-+ n = len / sizeof(u32);
-+ for (; n > 0; n--) {
-+ *d = cpu_to_be32p((const __u32 *) s);
-+ s += sizeof(__u32);
-+ d++;
- }
-+}
-
-- return cfg;
-+static void qce_setup_config(struct qce_device *qce)
-+{
-+ u32 config;
-+
-+ /* get big endianness */
-+ config = qce_config_reg(qce, 0);
-+
-+ /* clear status */
-+ qce_write(qce, REG_STATUS, 0);
-+ qce_write(qce, REG_CONFIG, config);
-+}
-+
-+static inline void qce_crypto_go(struct qce_device *qce)
-+{
-+ qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
- }
-
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
- static u32 qce_auth_cfg(unsigned long flags, u32 key_size)
- {
- u32 cfg = 0;
-@@ -135,88 +139,6 @@ static u32 qce_auth_cfg(unsigned long fl
- return cfg;
- }
-
--static u32 qce_config_reg(struct qce_device *qce, int little)
--{
-- u32 beats = (qce->burst_size >> 3) - 1;
-- u32 pipe_pair = qce->pipe_pair_id;
-- u32 config;
--
-- config = (beats << REQ_SIZE_SHIFT) & REQ_SIZE_MASK;
-- config |= BIT(MASK_DOUT_INTR_SHIFT) | BIT(MASK_DIN_INTR_SHIFT) |
-- BIT(MASK_OP_DONE_INTR_SHIFT) | BIT(MASK_ERR_INTR_SHIFT);
-- config |= (pipe_pair << PIPE_SET_SELECT_SHIFT) & PIPE_SET_SELECT_MASK;
-- config &= ~HIGH_SPD_EN_N_SHIFT;
--
-- if (little)
-- config |= BIT(LITTLE_ENDIAN_MODE_SHIFT);
--
-- return config;
--}
--
--void qce_cpu_to_be32p_array(__be32 *dst, const u8 *src, unsigned int len)
--{
-- __be32 *d = dst;
-- const u8 *s = src;
-- unsigned int n;
--
-- n = len / sizeof(u32);
-- for (; n > 0; n--) {
-- *d = cpu_to_be32p((const __u32 *) s);
-- s += sizeof(__u32);
-- d++;
-- }
--}
--
--static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
--{
-- u8 swap[QCE_AES_IV_LENGTH];
-- u32 i, j;
--
-- if (ivsize > QCE_AES_IV_LENGTH)
-- return;
--
-- memset(swap, 0, QCE_AES_IV_LENGTH);
--
-- for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
-- i < QCE_AES_IV_LENGTH; i++, j--)
-- swap[i] = src[j];
--
-- qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
--}
--
--static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
-- unsigned int enckeylen, unsigned int cryptlen)
--{
-- u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
-- unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
-- unsigned int xtsdusize;
--
-- qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
-- enckeylen / 2);
-- qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
--
-- /* xts du size 512B */
-- xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
-- qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
--}
--
--static void qce_setup_config(struct qce_device *qce)
--{
-- u32 config;
--
-- /* get big endianness */
-- config = qce_config_reg(qce, 0);
--
-- /* clear status */
-- qce_write(qce, REG_STATUS, 0);
-- qce_write(qce, REG_CONFIG, config);
--}
--
--static inline void qce_crypto_go(struct qce_device *qce)
--{
-- qce_write(qce, REG_GOPROC, BIT(GO_SHIFT) | BIT(RESULTS_DUMP_SHIFT));
--}
--
- static int qce_setup_regs_ahash(struct crypto_async_request *async_req,
- u32 totallen, u32 offset)
- {
-@@ -301,6 +223,87 @@ go_proc:
-
- return 0;
- }
-+#endif
-+
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
-+static u32 qce_encr_cfg(unsigned long flags, u32 aes_key_size)
-+{
-+ u32 cfg = 0;
-+
-+ if (IS_AES(flags)) {
-+ if (aes_key_size == AES_KEYSIZE_128)
-+ cfg |= ENCR_KEY_SZ_AES128 << ENCR_KEY_SZ_SHIFT;
-+ else if (aes_key_size == AES_KEYSIZE_256)
-+ cfg |= ENCR_KEY_SZ_AES256 << ENCR_KEY_SZ_SHIFT;
-+ }
-+
-+ if (IS_AES(flags))
-+ cfg |= ENCR_ALG_AES << ENCR_ALG_SHIFT;
-+ else if (IS_DES(flags) || IS_3DES(flags))
-+ cfg |= ENCR_ALG_DES << ENCR_ALG_SHIFT;
-+
-+ if (IS_DES(flags))
-+ cfg |= ENCR_KEY_SZ_DES << ENCR_KEY_SZ_SHIFT;
-+
-+ if (IS_3DES(flags))
-+ cfg |= ENCR_KEY_SZ_3DES << ENCR_KEY_SZ_SHIFT;
-+
-+ switch (flags & QCE_MODE_MASK) {
-+ case QCE_MODE_ECB:
-+ cfg |= ENCR_MODE_ECB << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_CBC:
-+ cfg |= ENCR_MODE_CBC << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_CTR:
-+ cfg |= ENCR_MODE_CTR << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_XTS:
-+ cfg |= ENCR_MODE_XTS << ENCR_MODE_SHIFT;
-+ break;
-+ case QCE_MODE_CCM:
-+ cfg |= ENCR_MODE_CCM << ENCR_MODE_SHIFT;
-+ cfg |= LAST_CCM_XFR << LAST_CCM_SHIFT;
-+ break;
-+ default:
-+ return ~0;
-+ }
-+
-+ return cfg;
-+}
-+
-+static void qce_xts_swapiv(__be32 *dst, const u8 *src, unsigned int ivsize)
-+{
-+ u8 swap[QCE_AES_IV_LENGTH];
-+ u32 i, j;
-+
-+ if (ivsize > QCE_AES_IV_LENGTH)
-+ return;
-+
-+ memset(swap, 0, QCE_AES_IV_LENGTH);
-+
-+ for (i = (QCE_AES_IV_LENGTH - ivsize), j = ivsize - 1;
-+ i < QCE_AES_IV_LENGTH; i++, j--)
-+ swap[i] = src[j];
-+
-+ qce_cpu_to_be32p_array(dst, swap, QCE_AES_IV_LENGTH);
-+}
-+
-+static void qce_xtskey(struct qce_device *qce, const u8 *enckey,
-+ unsigned int enckeylen, unsigned int cryptlen)
-+{
-+ u32 xtskey[QCE_MAX_CIPHER_KEY_SIZE / sizeof(u32)] = {0};
-+ unsigned int xtsklen = enckeylen / (2 * sizeof(u32));
-+ unsigned int xtsdusize;
-+
-+ qce_cpu_to_be32p_array((__be32 *)xtskey, enckey + enckeylen / 2,
-+ enckeylen / 2);
-+ qce_write_array(qce, REG_ENCR_XTS_KEY0, xtskey, xtsklen);
-+
-+ /* xts du size 512B */
-+ xtsdusize = min_t(u32, QCE_SECTOR_SIZE, cryptlen);
-+ qce_write(qce, REG_ENCR_XTS_DU_SIZE, xtsdusize);
-+}
-
- static int qce_setup_regs_skcipher(struct crypto_async_request *async_req,
- u32 totallen, u32 offset)
-@@ -382,15 +385,20 @@ static int qce_setup_regs_skcipher(struc
-
- return 0;
- }
-+#endif
-
- int qce_start(struct crypto_async_request *async_req, u32 type, u32 totallen,
- u32 offset)
- {
- switch (type) {
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
- case CRYPTO_ALG_TYPE_SKCIPHER:
- return qce_setup_regs_skcipher(async_req, totallen, offset);
-+#endif
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
- case CRYPTO_ALG_TYPE_AHASH:
- return qce_setup_regs_ahash(async_req, totallen, offset);
-+#endif
- default:
- return -EINVAL;
- }
---- a/drivers/crypto/qce/core.c
-+++ b/drivers/crypto/qce/core.c
-@@ -22,8 +22,12 @@
- #define QCE_QUEUE_LENGTH 1
-
- static const struct qce_algo_ops *qce_ops[] = {
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SKCIPHER
- &skcipher_ops,
-+#endif
-+#ifdef CONFIG_CRYPTO_DEV_QCE_SHA
- &ahash_ops,
-+#endif
- };
-
- static void qce_unregister_algs(struct qce_device *qce)
+++ /dev/null
-From 8a4540321e8bcf7a5b485c332a2e78f3501c78ed Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 29 Nov 2018 22:29:36 +0100
-Subject: [PATCH] ipq40xx: Fix booting secondary cores
-
-Add the second part of old 071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
-We dont modify the patch itself as its upstream and this change is not.
-
-Originally added by Mantas Pucka Mantas Pucka <mantas@8devices.com>
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -102,6 +102,7 @@
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
-+ qcom,saw = <&saw_l2>;
- };
- };
-
-@@ -341,6 +342,12 @@
- regulator;
- };
-
-+ saw_l2: regulator@b012000 {
-+ compatible = "qcom,saw2";
-+ reg = <0xb012000 0x1000>;
-+ regulator;
-+ };
-+
- blsp1_uart1: serial@78af000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x78af000 0x200>;
+++ /dev/null
-From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 22 Jul 2018 12:07:57 +0200
-Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support
-
-Add support for the Qualcomm Atheros IPQ4019 SoC.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/Makefile | 1 +
- arch/arm/mach-qcom/Kconfig | 5 +++++
- 2 files changed, 6 insertions(+)
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -156,6 +156,7 @@ textofs-$(CONFIG_ARCH_MSM8X60) := 0x0020
- textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
- textofs-$(CONFIG_ARCH_MESON) := 0x00208000
- textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
-+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
-
- # Machine directory name. This list is sorted alphanumerically
- # by CONFIG_* macro name.
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -28,4 +28,9 @@ config ARCH_MDM9615
- bool "Enable support for MDM9615"
- select CLKSRC_QCOM
-
-+config ARCH_IPQ40XX
-+ bool "Enable support for IPQ40XX"
-+ select CLKSRC_QCOM
-+ select HAVE_ARM_ARCH_TIMER
-+
- endif
+++ /dev/null
-From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 15:09:36 +0200
-Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
-
-This patch adds the binding documentation for the HS/SS USB PHY found
-inside Qualcom Dakota SoCs.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../bindings/phy/phy-qcom-ipq4019-usb.txt | 21 +++++++++++++++++++++
- 1 file changed, 21 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
-@@ -0,0 +1,21 @@
-+Qualcom Dakota HS/SS USB PHY
-+
-+Required properties:
-+ - compatible: "qcom,usb-ss-ipq4019-phy",
-+ "qcom,usb-hs-ipq4019-phy"
-+ - reg: offset and length of the registers
-+ - #phy-cells: should be 0
-+ - resets: the reset controllers as listed below
-+ - reset-names: the names of the reset controllers
-+ "por_rst" - the POR reset line for SS and HS phys
-+ "srif_rst" - the SRIF reset line for HS phys
-+Example:
-+
-+hsphy@a8000 {
-+ compatible = "qcom,usb-hs-ipq4019-phy";
-+ phy-cells = <0>;
-+ reg = <0xa8000 0x40>;
-+ resets = <&gcc USB2_HSPHY_POR_ARES>,
-+ <&gcc USB2_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+};
+++ /dev/null
-From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 14:45:49 +0200
-Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019
-
-Add a driver to setup the USB phy on Qualcom Dakota SoCs.
-The driver sets up HS and SS phys. In case of HS some magic values need to
-be written to magic offsets. These were taken from the SDK driver.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/phy/qualcomm/Kconfig | 7 ++
- drivers/phy/qualcomm/Makefile | 1 +
- drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++
- 3 files changed, 196 insertions(+)
- create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -18,6 +18,13 @@ config PHY_QCOM_APQ8064_SATA
- depends on OF
- select GENERIC_PHY
-
-+config PHY_QCOM_IPQ4019_USB
-+ tristate "Qualcomm IPQ4019 USB PHY module"
-+ depends on OF && ARCH_QCOM
-+ select GENERIC_PHY
-+ help
-+ Support for the USB PHY on QCOM IPQ4019/Dakota chipsets.
-+
- config PHY_QCOM_IPQ806X_SATA
- tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
- depends on ARCH_QCOM
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
-@@ -0,0 +1,188 @@
-+/*
-+ * Copyright (C) 2018 John Crispin <john@phrozen.org>
-+ *
-+ * Based on code from
-+ * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/of_platform.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/reset.h>
-+
-+/*
-+ * Magic registers copied from the SDK driver code
-+ */
-+#define PHY_CTRL0_ADDR 0x000
-+#define PHY_CTRL1_ADDR 0x004
-+#define PHY_CTRL2_ADDR 0x008
-+#define PHY_CTRL3_ADDR 0x00C
-+#define PHY_CTRL4_ADDR 0x010
-+#define PHY_MISC_ADDR 0x024
-+#define PHY_IPG_ADDR 0x030
-+
-+#define PHY_CTRL0_VAL 0xA4600015
-+#define PHY_CTRL1_VAL 0x09500000
-+#define PHY_CTRL2_VAL 0x00058180
-+#define PHY_CTRL3_VAL 0x6DB6DCD6
-+#define PHY_CTRL4_VAL 0x836DB6DB
-+#define PHY_MISC_VAL 0x3803FB0C
-+#define PHY_IPG_VAL 0x47323232
-+
-+struct ipq4019_usb_phy {
-+ struct device *dev;
-+ struct phy *phy;
-+ void __iomem *base;
-+ struct reset_control *por_rst;
-+ struct reset_control *srif_rst;
-+};
-+
-+static int ipq4019_ss_phy_power_off(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ reset_control_assert(phy->por_rst);
-+ msleep(10);
-+
-+ return 0;
-+}
-+
-+static int ipq4019_ss_phy_power_on(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ ipq4019_ss_phy_power_off(_phy);
-+
-+ reset_control_deassert(phy->por_rst);
-+
-+ return 0;
-+}
-+
-+static struct phy_ops ipq4019_usb_ss_phy_ops = {
-+ .power_on = ipq4019_ss_phy_power_on,
-+ .power_off = ipq4019_ss_phy_power_off,
-+};
-+
-+static int ipq4019_hs_phy_power_off(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ reset_control_assert(phy->por_rst);
-+ msleep(10);
-+
-+ reset_control_assert(phy->srif_rst);
-+ msleep(10);
-+
-+ return 0;
-+}
-+
-+static int ipq4019_hs_phy_power_on(struct phy *_phy)
-+{
-+ struct ipq4019_usb_phy *phy = phy_get_drvdata(_phy);
-+
-+ ipq4019_hs_phy_power_off(_phy);
-+
-+ reset_control_deassert(phy->srif_rst);
-+ msleep(10);
-+
-+ writel(PHY_CTRL0_VAL, phy->base + PHY_CTRL0_ADDR);
-+ writel(PHY_CTRL1_VAL, phy->base + PHY_CTRL1_ADDR);
-+ writel(PHY_CTRL2_VAL, phy->base + PHY_CTRL2_ADDR);
-+ writel(PHY_CTRL3_VAL, phy->base + PHY_CTRL3_ADDR);
-+ writel(PHY_CTRL4_VAL, phy->base + PHY_CTRL4_ADDR);
-+ writel(PHY_MISC_VAL, phy->base + PHY_MISC_ADDR);
-+ writel(PHY_IPG_VAL, phy->base + PHY_IPG_ADDR);
-+ msleep(10);
-+
-+ reset_control_deassert(phy->por_rst);
-+
-+ return 0;
-+}
-+
-+static struct phy_ops ipq4019_usb_hs_phy_ops = {
-+ .power_on = ipq4019_hs_phy_power_on,
-+ .power_off = ipq4019_hs_phy_power_off,
-+};
-+
-+static const struct of_device_id ipq4019_usb_phy_of_match[] = {
-+ { .compatible = "qcom,usb-hs-ipq4019-phy", .data = &ipq4019_usb_hs_phy_ops},
-+ { .compatible = "qcom,usb-ss-ipq4019-phy", .data = &ipq4019_usb_ss_phy_ops},
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, ipq4019_usb_phy_of_match);
-+
-+static int ipq4019_usb_phy_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct resource *res;
-+ struct phy_provider *phy_provider;
-+ struct ipq4019_usb_phy *phy;
-+ const struct of_device_id *match;
-+
-+ match = of_match_device(ipq4019_usb_phy_of_match, &pdev->dev);
-+ if (!match)
-+ return -ENODEV;
-+
-+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
-+ if (!phy)
-+ return -ENOMEM;
-+
-+ phy->dev = &pdev->dev;
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy->base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(phy->base)) {
-+ dev_err(dev, "failed to remap register memory\n");
-+ return PTR_ERR(phy->base);
-+ }
-+
-+ phy->por_rst = devm_reset_control_get(phy->dev, "por_rst");
-+ if (IS_ERR(phy->por_rst)) {
-+ if (PTR_ERR(phy->por_rst) != -EPROBE_DEFER)
-+ dev_err(dev, "POR reset is missing\n");
-+ return PTR_ERR(phy->por_rst);
-+ }
-+
-+ phy->srif_rst = devm_reset_control_get_optional(phy->dev, "srif_rst");
-+ if (IS_ERR(phy->srif_rst))
-+ return PTR_ERR(phy->srif_rst);
-+
-+ phy->phy = devm_phy_create(dev, NULL, match->data);
-+ if (IS_ERR(phy->phy)) {
-+ dev_err(dev, "failed to create PHY\n");
-+ return PTR_ERR(phy->phy);
-+ }
-+ phy_set_drvdata(phy->phy, phy);
-+
-+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-+
-+ return PTR_ERR_OR_ZERO(phy_provider);
-+}
-+
-+static struct platform_driver ipq4019_usb_phy_driver = {
-+ .probe = ipq4019_usb_phy_probe,
-+ .driver = {
-+ .of_match_table = ipq4019_usb_phy_of_match,
-+ .name = "ipq4019-usb-phy",
-+ }
-+};
-+module_platform_driver(ipq4019_usb_phy_driver);
-+
-+MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
-+MODULE_AUTHOR("John Crispin <john@phrozen.org>");
-+MODULE_LICENSE("GPL v2");
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -1,6 +1,7 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
- obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
-+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
- obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
- obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
- obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
+++ /dev/null
-From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Tue, 24 Jul 2018 14:47:55 +0200
-Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
-
-This patch makes USB work on the Dakota EVB.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++
- 2 files changed, 94 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -109,5 +109,25 @@
- wifi@a800000 {
- status = "ok";
- };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ status = "okay";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ status = "okay";
-+ };
-+
-+ usb3: usb3@8af8800 {
-+ status = "okay";
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ status = "okay";
-+ };
-+
-+ usb2: usb2@60f8800 {
-+ status = "okay";
-+ };
- };
- };
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -563,5 +563,79 @@
- "legacy";
- status = "disabled";
- };
-+
-+ usb3_ss_phy: ssphy@9a000 {
-+ compatible = "qcom,usb-ss-ipq4019-phy";
-+ #phy-cells = <0>;
-+ reg = <0x9a000 0x800>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-+ reset-names = "por_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3_hs_phy: hsphy@a6000 {
-+ compatible = "qcom,usb-hs-ipq4019-phy";
-+ #phy-cells = <0>;
-+ reg = <0xa6000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb3@8af8800 {
-+ compatible = "qcom,dwc3";
-+ reg = <0x8af8800 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB3_MASTER_CLK>,
-+ <&gcc GCC_USB3_SLEEP_CLK>,
-+ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-+ clock-names = "master", "sleep", "mock_utmi";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@8a00000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x8a00000 0xf8000>;
-+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
-+ phy-names = "usb2-phy", "usb3-phy";
-+ dr_mode = "host";
-+ };
-+ };
-+
-+ usb2_hs_phy: hsphy@a8000 {
-+ compatible = "qcom,usb-hs-ipq4019-phy";
-+ #phy-cells = <0>;
-+ reg = <0xa8000 0x40>;
-+ reg-names = "phy_base";
-+ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-+ reset-names = "por_rst", "srif_rst";
-+ status = "disabled";
-+ };
-+
-+ usb2@60f8800 {
-+ compatible = "qcom,dwc3";
-+ reg = <0x60f8800 0x100>;
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ clocks = <&gcc GCC_USB2_MASTER_CLK>,
-+ <&gcc GCC_USB2_SLEEP_CLK>,
-+ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-+ clock-names = "master", "sleep", "mock_utmi";
-+ ranges;
-+ status = "disabled";
-+
-+ dwc3@6000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x6000000 0xf8000>;
-+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+ phys = <&usb2_hs_phy>;
-+ phy-names = "usb2-phy";
-+ dr_mode = "host";
-+ };
-+ };
- };
- };
+++ /dev/null
-From patchwork Mon May 21 20:57:38 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v5,3/4] ARM: dts: qcom: add gpio-ranges property
-X-Patchwork-Submitter: Christian Lamparter <chunkeey@gmail.com>
-X-Patchwork-Id: 917856
-Message-Id: <0ae3376606a89bcdf3fe753a5c967f7103699e09.1526935804.git.chunkeey@gmail.com>
-To: linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org
-Cc: Bjorn Andersson <bjorn.andersson@linaro.org>,
- Linus Walleij <linus.walleij@linaro.org>,
- Stephen Boyd <sboyd@kernel.org>, David Brown <david.brown@linaro.org>,
- Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>,
- Andy Gross <andy.gross@linaro.org>,
- Sven Eckelmann <sven.eckelmann@openmesh.com>
-Date: Mon, 21 May 2018 22:57:38 +0200
-From: Christian Lamparter <chunkeey@gmail.com>
-List-Id: <linux-gpio.vger.kernel.org>
-
-This patch adds the gpio-ranges property to almost all of
-the Qualcomm ARM platforms that utilize the pinctrl-msm
-framework.
-
-The gpio-ranges property is part of the gpiolib subsystem.
-As a result, the binding text is available in section
-"2.1 gpio- and pin-controller interaction" of
-Documentation/devicetree/bindings/gpio/gpio.txt
-
-For more information please see the patch titled:
-"pinctrl: msm: fix gpio-hog related boot issues" from
-this series.
-
-Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
-Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019]
-Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
----
-To help with git bisect, the DT update patch has been intentionally
-placed after the "pinctrl: msm: fix gpio-hog related boot issues".
-Otherwise - if the order was reveresed - and bisect decides to split
-between these two patches, the gpiochip_add_pin_ranges() function
-will be executed twice with the same parameters for the same pinctrl.
----
- arch/arm/boot/dts/qcom-apq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-apq8084.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
- arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 +
- arch/arm/boot/dts/qcom-mdm9615.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8660.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8960.dtsi | 1 +
- arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++-
- arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8992.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8994.dtsi | 1 +
- arch/arm64/boot/dts/qcom/msm8996.dtsi | 1 +
- 13 files changed, 14 insertions(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -201,6 +201,7 @@
- compatible = "qcom,ipq4019-pinctrl";
- reg = <0x01000000 0x300000>;
- gpio-controller;
-+ gpio-ranges = <&tlmm 0 0 100>;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+++ /dev/null
-From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Sun, 11 Mar 2018 14:41:31 +0100
-Subject: [PATCH 2/2] clk: fix apss cpu overclocking
-
-There's an interaction issue between the clk changes:"
-clk: qcom: ipq4019: Add the apss cpu pll divider clock node
-clk: qcom: ipq4019: remove fixed clocks and add pll clocks
-" and the cpufreq-dt.
-
-cpufreq-dt is now spamming the kernel-log with the following:
-
-[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP
-for freq 761142857 (-34)
-
-This only happens on certain devices like the Compex WPJ428
-and AVM FritzBox!4040. However, other devices like the Asus
-RT-AC58U and Meraki MR33 work just fine.
-
-The issue stem from the fact that all higher CPU-Clocks
-are achieved by switching the clock-parent to the P_DDRPLLAPSS
-(ddrpllapss). Which is set by Qualcomm's proprietary bootcode
-as part of the DDR calibration.
-
-For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked
-at round 533 MHz (ddrpllsdcc = 190285714 Hz).
-
-whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is
-clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz).
-
-This patch attempts to fix the issue by modifying
-clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate()
-to use a new qcom_find_freq_close() function, which returns the closest
-matching frequency, instead of the next higher. This way, the SoC in
-the FB4040 (with its max clock speed of 710.4 MHz) will no longer
-try to overclock to 761 MHz.
-
-Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node")
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
- 1 file changed, 31 insertions(+), 3 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq4019.c
-+++ b/drivers/clk/qcom/gcc-ipq4019.c
-@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe
- .reg = 0x2f020,
- };
-
-+
-+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f,
-+ unsigned long rate)
-+{
-+ const struct freq_tbl *last = NULL;
-+
-+ for ( ; f->freq; f++) {
-+ if (rate == f->freq)
-+ return f;
-+
-+ if (f->freq > rate) {
-+ if (!last ||
-+ (f->freq - rate) < (rate - last->freq))
-+ return f;
-+ else
-+ return last;
-+ }
-+ last = f;
-+ }
-+
-+ return last;
-+}
-+
- /*
- * Round rate function for APSS CPU PLL Clock divider.
- * It looks up the frequency table and returns the next higher frequency
-@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc
- struct clk_hw *p_hw;
- const struct freq_tbl *f;
-
-- f = qcom_find_freq(pll->freq_tbl, rate);
-+ f = qcom_find_freq_close(pll->freq_tbl, rate);
- if (!f)
- return -EINVAL;
-
-@@ -1278,7 +1301,7 @@ static int clk_cpu_div_set_rate(struct c
- u32 mask;
- int ret;
-
-- f = qcom_find_freq(pll->freq_tbl, rate);
-+ f = qcom_find_freq_close(pll->freq_tbl, rate);
- if (!f)
- return -EINVAL;
-
-@@ -1305,6 +1328,7 @@ static unsigned long
- clk_cpu_div_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
- {
-+ const struct freq_tbl *f;
- struct clk_fepll *pll = to_clk_fepll(hw);
- u32 cdiv, pre_div;
- u64 rate;
-@@ -1325,7 +1349,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
- rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
- do_div(rate, pre_div);
-
-- return rate;
-+ f = qcom_find_freq_close(pll->freq_tbl, rate);
-+ if (!f)
-+ return rate;
-+
-+ return f->freq;
- };
-
- static const struct clk_ops clk_regmap_cpu_div_ops = {
+++ /dev/null
-From 09f145f417a5d64d6b8d4476699dfb0eccc6c784 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Tue, 7 May 2019 10:14:05 +0300
-Subject: [PATCH] ipq40xx: fix high resolution timer
-
-Cherry-picked from CAF QSDK repo.
-Original commit message:
-The kernel is failing in switching the timer for high resolution
-mode and clock source operates in 10ms resolution. The always-on
-property needs to be given for timer device tree node to make
-clock source working in 1ns resolution.
-
-Change-Id: I7c00b3c74d97c2a30ac9f05e18b511a0550fd459
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
-Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -166,6 +166,7 @@
- <1 4 0xf08>,
- <1 1 0xf08>;
- clock-frequency = <48000000>;
-+ always-on;
- };
-
- soc {
+++ /dev/null
-From 97043d292365ae39d62b54a6d79dff98d048b501 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Wed, 22 Jan 2020 12:44:14 +0100
-Subject: [PATCH] From ebf652b408200504194be32ad0a3f5bb49d6000a Mon Sep 17
- 00:00:00 2001 From: Robert Marko <robert.marko@sartura.hr> Date: Sun, 12 Jan
- 2020 12:30:01 +0100 Subject: [PATCH] regulator: add IPQ4019 SDHCI VQMMC LDO
- driver
-
-This introduces the IPQ4019 VQMMC LDO driver needed for
-the SD/EMMC driver I/O level operation.
-This will enable introducing SD/EMMC support for the built-in controller.
-
-Signed-off-by: Mantas Pucka <mantas@8devices.com>
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
-Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/regulator/Kconfig | 7 ++
- drivers/regulator/Makefile | 1 +
- drivers/regulator/vqmmc-ipq4019-regulator.c | 101 ++++++++++++++++++++
- 3 files changed, 109 insertions(+)
- create mode 100644 drivers/regulator/vqmmc-ipq4019-regulator.c
-
---- a/drivers/regulator/Kconfig
-+++ b/drivers/regulator/Kconfig
-@@ -1077,6 +1077,13 @@ config REGULATOR_VEXPRESS
- This driver provides support for voltage regulators available
- on the ARM Ltd's Versatile Express platform.
-
-+config REGULATOR_VQMMC_IPQ4019
-+ tristate "IPQ4019 VQMMC SD LDO regulator support"
-+ depends on ARCH_QCOM
-+ help
-+ This driver provides support for the VQMMC LDO I/0
-+ voltage regulator of the IPQ4019 SD/EMMC controller.
-+
- config REGULATOR_WM831X
- tristate "Wolfson Microelectronics WM831x PMIC regulators"
- depends on MFD_WM831X
---- a/drivers/regulator/Makefile
-+++ b/drivers/regulator/Makefile
-@@ -132,6 +132,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-r
- obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
- obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
- obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
-+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o
- obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
- obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
- obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
---- /dev/null
-+++ b/drivers/regulator/vqmmc-ipq4019-regulator.c
-@@ -0,0 +1,101 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+//
-+// Copyright (c) 2019 Mantas Pucka <mantas@8devices.com>
-+// Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr>
-+//
-+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator
-+
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/regmap.h>
-+#include <linux/regulator/driver.h>
-+#include <linux/regulator/machine.h>
-+#include <linux/regulator/of_regulator.h>
-+
-+static const unsigned int ipq4019_vmmc_voltages[] = {
-+ 1500000, 1800000, 2500000, 3000000,
-+};
-+
-+static const struct regulator_ops ipq4019_regulator_voltage_ops = {
-+ .list_voltage = regulator_list_voltage_table,
-+ .map_voltage = regulator_map_voltage_ascend,
-+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
-+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
-+};
-+
-+static const struct regulator_desc vmmc_regulator = {
-+ .name = "vmmcq",
-+ .ops = &ipq4019_regulator_voltage_ops,
-+ .type = REGULATOR_VOLTAGE,
-+ .owner = THIS_MODULE,
-+ .volt_table = ipq4019_vmmc_voltages,
-+ .n_voltages = ARRAY_SIZE(ipq4019_vmmc_voltages),
-+ .vsel_reg = 0,
-+ .vsel_mask = 0x3,
-+};
-+
-+static const struct regmap_config ipq4019_vmmcq_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+};
-+
-+static int ipq4019_regulator_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct regulator_init_data *init_data;
-+ struct regulator_config cfg = {};
-+ struct regulator_dev *rdev;
-+ struct resource *res;
-+ struct regmap *rmap;
-+ void __iomem *base;
-+
-+ init_data = of_get_regulator_init_data(dev, dev->of_node,
-+ &vmmc_regulator);
-+ if (!init_data)
-+ return -EINVAL;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config);
-+ if (IS_ERR(rmap))
-+ return PTR_ERR(rmap);
-+
-+ cfg.dev = dev;
-+ cfg.init_data = init_data;
-+ cfg.of_node = dev->of_node;
-+ cfg.regmap = rmap;
-+
-+ rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg);
-+ if (IS_ERR(rdev)) {
-+ dev_err(dev, "Failed to register regulator: %ld\n",
-+ PTR_ERR(rdev));
-+ return PTR_ERR(rdev);
-+ }
-+ platform_set_drvdata(pdev, rdev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id regulator_ipq4019_of_match[] = {
-+ { .compatible = "qcom,vqmmc-ipq4019-regulator", },
-+ {},
-+};
-+
-+static struct platform_driver ipq4019_regulator_driver = {
-+ .probe = ipq4019_regulator_probe,
-+ .driver = {
-+ .name = "vqmmc-ipq4019-regulator",
-+ .of_match_table = of_match_ptr(regulator_ipq4019_of_match),
-+ },
-+};
-+module_platform_driver(ipq4019_regulator_driver);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>");
-+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator");
+++ /dev/null
-From 04b3b72b5b8fdb883bfdc619cb29b03641b1cc6a Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Thu, 15 Aug 2019 19:28:23 +0200
-Subject: [PATCH] ARM: dts: qcom: ipq4019: Add SDHCI controller node
-
-IPQ4019 has a built in SD/eMMC controller which is supported by the
-SDHCI MSM driver, by the "qcom,sdhci-msm-v4" binding.
-So lets add the appropriate node for it.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -209,6 +209,18 @@
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- };
-
-+ sdhci: sdhci@7824900 {
-+ compatible = "qcom,sdhci-msm-v4";
-+ reg = <0x7824900 0x11c>, <0x7824000 0x800>;
-+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "hc_irq", "pwr_irq";
-+ bus-width = <8>;
-+ clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>,
-+ <&gcc GCC_DCD_XO_CLK>;
-+ clock-names = "core", "iface", "xo";
-+ status = "disabled";
-+ };
-+
- blsp_dma: dma@7884000 {
- compatible = "qcom,bam-v1.7.0";
- reg = <0x07884000 0x23000>;
+++ /dev/null
-From 5b08c1d567ee8e6af94696b3e549997cbdb2bb80 Mon Sep 17 00:00:00 2001
-From: Jaiganesh Narayanan <njaigane@codeaurora.org>
-Date: Thu, 1 Sep 2016 10:40:38 +0530
-Subject: [PATCH] pinctrl: qcom: ipq4019: add open drain support
-
-Signed-off-by: Jaiganesh Narayanan <njaigane@codeaurora.org>
-[ Brian: adapted from from the Chromium OS kernel used on IPQ4019-based
- WiFi APs. ]
-Signed-off-by: Brian Norris <computersforpeace@gmail.com>
----
-https://lore.kernel.org/linux-gpio/20200703080646.23233-1-computersforpeace@gmail.com/
-
- drivers/pinctrl/qcom/pinctrl-ipq4019.c | 1 +
- drivers/pinctrl/qcom/pinctrl-msm.c | 13 +++++++++++++
- drivers/pinctrl/qcom/pinctrl-msm.h | 2 ++
- 3 files changed, 16 insertions(+)
-
---- a/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq4019.c
-@@ -254,6 +254,7 @@ DECLARE_QCA_GPIO_PINS(99);
- .mux_bit = 2, \
- .pull_bit = 0, \
- .drv_bit = 6, \
-+ .od_bit = 12, \
- .oe_bit = 9, \
- .in_bit = 0, \
- .out_bit = 1, \
---- a/drivers/pinctrl/qcom/pinctrl-msm.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
-@@ -225,6 +225,10 @@ static int msm_config_reg(struct msm_pin
- *bit = g->pull_bit;
- *mask = 3;
- break;
-+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-+ *bit = g->od_bit;
-+ *mask = 1;
-+ break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- *bit = g->drv_bit;
- *mask = 7;
-@@ -302,6 +306,12 @@ static int msm_config_group_get(struct p
- if (!arg)
- return -EINVAL;
- break;
-+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-+ /* Pin is not open-drain */
-+ if (!arg)
-+ return -EINVAL;
-+ arg = 1;
-+ break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- arg = msm_regval_to_drive(arg);
- break;
-@@ -374,6 +384,9 @@ static int msm_config_group_set(struct p
- else
- arg = MSM_PULL_UP;
- break;
-+ case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-+ arg = 1;
-+ break;
- case PIN_CONFIG_DRIVE_STRENGTH:
- /* Check for invalid values */
- if (arg > 16 || arg < 2 || (arg % 2) != 0)
---- a/drivers/pinctrl/qcom/pinctrl-msm.h
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.h
-@@ -38,6 +38,7 @@ struct msm_function {
- * @mux_bit: Offset in @ctl_reg for the pinmux function selection.
- * @pull_bit: Offset in @ctl_reg for the bias configuration.
- * @drv_bit: Offset in @ctl_reg for the drive strength configuration.
-+ * @od_bit: Offset in @ctl_reg for controlling open drain.
- * @oe_bit: Offset in @ctl_reg for controlling output enable.
- * @in_bit: Offset in @io_reg for the input bit value.
- * @out_bit: Offset in @io_reg for the output bit value.
-@@ -75,6 +76,7 @@ struct msm_pingroup {
- unsigned pull_bit:5;
- unsigned drv_bit:5;
-
-+ unsigned od_bit:5;
- unsigned oe_bit:5;
- unsigned in_bit:5;
- unsigned out_bit:5;
+++ /dev/null
-From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robert.marko@sartura.hr>
-Date: Wed, 22 Jan 2020 12:56:35 +0100
-Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node
-
-Since we now have driver for the SDHCI VQMMC LDO needed
-for I/0 voltage levels lets introduce the necessary node for it.
-
-Signed-off-by: Robert Marko <robert.marko@sartura.hr>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -209,6 +209,16 @@
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- };
-
-+ vqmmc: regulator@1948000 {
-+ compatible = "qcom,vqmmc-ipq4019-regulator";
-+ reg = <0x01948000 0x4>;
-+ regulator-name = "vqmmc";
-+ regulator-min-microvolt = <1500000>;
-+ regulator-max-microvolt = <3000000>;
-+ regulator-always-on;
-+ status = "disabled";
-+ };
-+
- sdhci: sdhci@7824900 {
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x7824900 0x11c>, <0x7824000 0x800>;
--- /dev/null
+From 77d9b11ae7269dcf376c3b9493209f712524e986 Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Wed, 22 Jan 2020 12:56:35 +0100
+Subject: [PATCH] arm: dts: IPQ4019: add SDHCI VQMMC LDO node
+
+Since we now have driver for the SDHCI VQMMC LDO needed
+for I/0 voltage levels lets introduce the necessary node for it.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -209,6 +209,16 @@
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
++ vqmmc: regulator@1948000 {
++ compatible = "qcom,vqmmc-ipq4019-regulator";
++ reg = <0x01948000 0x4>;
++ regulator-name = "vqmmc";
++ regulator-min-microvolt = <1500000>;
++ regulator-max-microvolt = <3000000>;
++ regulator-always-on;
++ status = "disabled";
++ };
++
+ sdhci: sdhci@7824900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x7824900 0x11c>, <0x7824000 0x800>;
--- /dev/null
+From 193856b5fe11c50a0b6ff22457dd674c1a45fec6 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Wed, 9 Sep 2020 18:31:03 +0200
+Subject: [PATCH] ARM: dts: qcom: ipq4019: add USB devicetree nodes
+
+Since we now have driver for the USB PHY, and USB controller is already supported by the DWC3 driver lets add the necessary nodes to DTSI.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+Reviewed-by: Vinod Koul <vkoul@kernel.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 74 +++++++++++++++++++++++++++++
+ 1 file changed, 74 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -615,5 +615,79 @@
+ reg = <4>;
+ };
+ };
++
++ usb3_ss_phy: ssphy@9a000 {
++ compatible = "qcom,usb-ss-ipq4019-phy";
++ #phy-cells = <0>;
++ reg = <0x9a000 0x800>;
++ reg-names = "phy_base";
++ resets = <&gcc USB3_UNIPHY_PHY_ARES>;
++ reset-names = "por_rst";
++ status = "disabled";
++ };
++
++ usb3_hs_phy: hsphy@a6000 {
++ compatible = "qcom,usb-hs-ipq4019-phy";
++ #phy-cells = <0>;
++ reg = <0xa6000 0x40>;
++ reg-names = "phy_base";
++ resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
++ reset-names = "por_rst", "srif_rst";
++ status = "disabled";
++ };
++
++ usb3: usb3@8af8800 {
++ compatible = "qcom,dwc3";
++ reg = <0x8af8800 0x100>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ clocks = <&gcc GCC_USB3_MASTER_CLK>,
++ <&gcc GCC_USB3_SLEEP_CLK>,
++ <&gcc GCC_USB3_MOCK_UTMI_CLK>;
++ clock-names = "master", "sleep", "mock_utmi";
++ ranges;
++ status = "disabled";
++
++ dwc3@8a00000 {
++ compatible = "snps,dwc3";
++ reg = <0x8a00000 0xf8000>;
++ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
++ phy-names = "usb2-phy", "usb3-phy";
++ dr_mode = "host";
++ };
++ };
++
++ usb2_hs_phy: hsphy@a8000 {
++ compatible = "qcom,usb-hs-ipq4019-phy";
++ #phy-cells = <0>;
++ reg = <0xa8000 0x40>;
++ reg-names = "phy_base";
++ resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
++ reset-names = "por_rst", "srif_rst";
++ status = "disabled";
++ };
++
++ usb2: usb2@60f8800 {
++ compatible = "qcom,dwc3";
++ reg = <0x60f8800 0x100>;
++ #address-cells = <1>;
++ #size-cells = <1>;
++ clocks = <&gcc GCC_USB2_MASTER_CLK>,
++ <&gcc GCC_USB2_SLEEP_CLK>,
++ <&gcc GCC_USB2_MOCK_UTMI_CLK>;
++ clock-names = "master", "sleep", "mock_utmi";
++ ranges;
++ status = "disabled";
++
++ dwc3@6000000 {
++ compatible = "snps,dwc3";
++ reg = <0x6000000 0xf8000>;
++ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
++ phys = <&usb2_hs_phy>;
++ phy-names = "usb2-phy";
++ dr_mode = "host";
++ };
++ };
+ };
+ };
--- /dev/null
+From caa3ee6b094ee18021943504c938919fcac325ec Mon Sep 17 00:00:00 2001
+From: Robert Marko <robert.marko@sartura.hr>
+Date: Wed, 9 Sep 2020 20:40:33 +0200
+Subject: [PATCH] arm: dts: qcom: ipq4019: add more labels
+
+Lets add labels to more commonly used nodes for easier modification in board DTS files.
+
+Signed-off-by: Robert Marko <robert.marko@sartura.hr>
+Cc: Luka Perkov <luka.perkov@sartura.hr>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -190,7 +190,7 @@
+ reg = <0x1800000 0x60000>;
+ };
+
+- rng@22000 {
++ prng: rng@22000 {
+ compatible = "qcom,prng";
+ reg = <0x22000 0x140>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+@@ -310,7 +310,7 @@
+ status = "disabled";
+ };
+
+- crypto@8e3a000 {
++ crypto: crypto@8e3a000 {
+ compatible = "qcom,crypto-v5.1";
+ reg = <0x08e3a000 0x6000>;
+ clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+@@ -396,7 +396,7 @@
+ dma-names = "rx", "tx";
+ };
+
+- watchdog@b017000 {
++ watchdog: watchdog@b017000 {
+ compatible = "qcom,kpss-wdt", "qcom,kpss-wdt-ipq4019";
+ reg = <0xb017000 0x40>;
+ clocks = <&sleep_clk>;
--- /dev/null
+From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Sun, 11 Mar 2018 14:41:31 +0100
+Subject: [PATCH 2/2] clk: fix apss cpu overclocking
+
+There's an interaction issue between the clk changes:"
+clk: qcom: ipq4019: Add the apss cpu pll divider clock node
+clk: qcom: ipq4019: remove fixed clocks and add pll clocks
+" and the cpufreq-dt.
+
+cpufreq-dt is now spamming the kernel-log with the following:
+
+[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP
+for freq 761142857 (-34)
+
+This only happens on certain devices like the Compex WPJ428
+and AVM FritzBox!4040. However, other devices like the Asus
+RT-AC58U and Meraki MR33 work just fine.
+
+The issue stem from the fact that all higher CPU-Clocks
+are achieved by switching the clock-parent to the P_DDRPLLAPSS
+(ddrpllapss). Which is set by Qualcomm's proprietary bootcode
+as part of the DDR calibration.
+
+For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked
+at round 533 MHz (ddrpllsdcc = 190285714 Hz).
+
+whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is
+clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz).
+
+This patch attempts to fix the issue by modifying
+clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate()
+to use a new qcom_find_freq_close() function, which returns the closest
+matching frequency, instead of the next higher. This way, the SoC in
+the FB4040 (with its max clock speed of 710.4 MHz) will no longer
+try to overclock to 761 MHz.
+
+Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node")
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
+ 1 file changed, 31 insertions(+), 3 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-ipq4019.c
++++ b/drivers/clk/qcom/gcc-ipq4019.c
+@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe
+ .reg = 0x2f020,
+ };
+
++
++const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f,
++ unsigned long rate)
++{
++ const struct freq_tbl *last = NULL;
++
++ for ( ; f->freq; f++) {
++ if (rate == f->freq)
++ return f;
++
++ if (f->freq > rate) {
++ if (!last ||
++ (f->freq - rate) < (rate - last->freq))
++ return f;
++ else
++ return last;
++ }
++ last = f;
++ }
++
++ return last;
++}
++
+ /*
+ * Round rate function for APSS CPU PLL Clock divider.
+ * It looks up the frequency table and returns the next higher frequency
+@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc
+ struct clk_hw *p_hw;
+ const struct freq_tbl *f;
+
+- f = qcom_find_freq(pll->freq_tbl, rate);
++ f = qcom_find_freq_close(pll->freq_tbl, rate);
+ if (!f)
+ return -EINVAL;
+
+@@ -1278,7 +1301,7 @@ static int clk_cpu_div_set_rate(struct c
+ u32 mask;
+ int ret;
+
+- f = qcom_find_freq(pll->freq_tbl, rate);
++ f = qcom_find_freq_close(pll->freq_tbl, rate);
+ if (!f)
+ return -EINVAL;
+
+@@ -1305,6 +1328,7 @@ static unsigned long
+ clk_cpu_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+ {
++ const struct freq_tbl *f;
+ struct clk_fepll *pll = to_clk_fepll(hw);
+ u32 cdiv, pre_div;
+ u64 rate;
+@@ -1325,7 +1349,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
+ rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
+ do_div(rate, pre_div);
+
+- return rate;
++ f = qcom_find_freq_close(pll->freq_tbl, rate);
++ if (!f)
++ return rate;
++
++ return f->freq;
+ };
+
+ static const struct clk_ops clk_regmap_cpu_div_ops = {
+++ /dev/null
-From 158acdbf0336f601971637f988b57a6a67a0869b Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 15 Dec 2019 13:10:50 +0100
-Subject: [PATCH] mtd: spi-nor: Add support for mx25r3235f
-
-Add MTD support for the Macronix MX25R3235F SPI NOR chip from Macronix.
-The chip has 4MB of total capacity, divided into a total of 64 sectors,
-each 64KB sized. The chip also supports 4KB large sectors.
-Additionally, it supports dual and quad read modes.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/mtd/spi-nor/spi-nor.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -2344,6 +2344,8 @@ static const struct flash_info spi_nor_i
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-+ { "mx25r3235f", INFO(0xc22816, 0, 64 * 1024, 64,
-+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25u12835f", INFO(0xc22538, 0, 64 * 1024, 256,
- SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512,
+++ /dev/null
-From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:10:33 +0100
-Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
-
-This patch adds the mdio device-tree node.
-This is where the switch is connected to, so it's needed
-for the ethernet interfaces.
-
-Note: The driver isn't anywhere close to be upstream,
-so the info might change.
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -588,6 +588,34 @@
- status = "disabled";
- };
-
-+ mdio: mdio@90000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "qcom,ipq4019-mdio";
-+ reg = <0x90000 0x64>;
-+ status = "disabled";
-+
-+ ethphy0: ethernet-phy@0 {
-+ reg = <0>;
-+ };
-+
-+ ethphy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+
-+ ethphy2: ethernet-phy@2 {
-+ reg = <2>;
-+ };
-+
-+ ethphy3: ethernet-phy@3 {
-+ reg = <3>;
-+ };
-+
-+ ethphy4: ethernet-phy@4 {
-+ reg = <4>;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
+ tristate "Driver for Qualcomm Atheros IPQ40XX switches"
+ depends on HAS_IOMEM && OF
+ select SWCONFIG
-+ ---help---
++ help
+ This is the driver for Qualcomm Atheros IPQ40XX ESS switches.
+
endif # PHYLIB
+++ /dev/null
-From c611d3780fa101662a822d10acf8feb04ca97409 Mon Sep 17 00:00:00 2001
-From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sun, 20 Nov 2016 01:01:10 +0100
-Subject: [PATCH] dts: ipq4019: add ethernet ipqess node
-
-This patch adds the device-tree node for the ipqess ethernet
-interfaces.
-
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 60 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 60 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -699,6 +699,53 @@
- };
- };
-
-+ gmac: ethernet@c080000 {
-+ compatible = "qcom,ipq4019-ess-edma";
-+ reg = <0xc080000 0x8000>;
-+ interrupts = <GIC_SPI 65 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 67 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 69 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 71 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 74 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 76 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 79 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
-+ <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
-+
-+ status = "disabled";
-+
-+ phy-mode = "internal";
-+ fixed-link {
-+ speed = <1000>;
-+ full-duplex;
-+ pause;
-+ asym-pause;
-+ };
-+ };
-+
- usb3_ss_phy: ssphy@9a000 {
- compatible = "qcom,usb-ss-ipq4019-phy";
- #phy-cells = <0>;
};
serial@78af000 {
-@@ -110,6 +129,22 @@
+@@ -109,5 +128,41 @@
+ wifi@a800000 {
status = "ok";
};
-
++
+ mdio@90000 {
+ status = "okay";
+ };
+ status = "okay";
+ };
+
- usb3_ss_phy: ssphy@9a000 {
- status = "okay";
- };
++ usb3_ss_phy: ssphy@9a000 {
++ status = "okay";
++ };
++
++ usb3_hs_phy: hsphy@a6000 {
++ status = "okay";
++ };
++
++ usb3: usb3@8af8800 {
++ status = "okay";
++ };
++
++ usb2_hs_phy: hsphy@a8000 {
++ status = "okay";
++ };
++
++ usb2: usb2@60f8800 {
++ status = "okay";
++ };
+ };
+ };
--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
@@ -18,5 +18,73 @@
projects / openwrt / staging / mkresin.git / commitdiff