qualcommax: AW1000: add qca8081 PHY LED configuration
authorChukun Pan <amadeus@jmu.edu.cn>
Tue, 30 Jan 2024 15:25:27 +0000 (23:25 +0800)
committerRobert Marko <robimarko@gmail.com>
Fri, 16 Feb 2024 12:50:19 +0000 (13:50 +0100)
Since we can configure the PHY LED of the qca8081,
add a configuration for this device.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-aw1000.dts
target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds

index 10799d1986c9f638e8619414814dd92bcc761877..c85e9f1993aa330dd1cad42b2b2ab24a16b50d71 100644 (file)
                reg = <28>;
                reset-deassert-us = <10000>;
                reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
+
+               leds {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       led@2 {
+                               reg = <2>;
+                               active-low;
+                               color = <LED_COLOR_ID_GREEN>;
+                               function = LED_FUNCTION_WAN;
+                               default-state = "keep";
+                       };
+               };
        };
 };
 
index 8bf1ea8fa2a463a0f762d2f72edd9190e89979ca..d6f5db7093f529a8a92f6cb6196b7f4b11b8f3e6 100644 (file)
@@ -9,6 +9,7 @@ case "$board" in
 arcadyan,aw1000)
        ucidef_set_led_netdev "5g" "5G" "green:5g" "wwan0"
        ucidef_set_led_netdev "wan" "WAN" "green:internet" "wan"
+       ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "90000.mdio-1:1c:green:wan" "wan" "tx rx link_10 link_100 link_1000 link_2500"
        ;;
 dynalink,dl-wrx36)
        ucidef_set_led_netdev "wan-port-link-green" "WAN-PORT-LINK-GREEN" "90000.mdio-1:1c:green:wan" "wan" "link_2500"