target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-aw1000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /* Copyright (c) 2023, Chukun Pan <amadeus@jmu.edu.cn> */
   3
   4 /dts-v1/;
   5
   6 #include "ipq8074.dtsi"
   7 #include "ipq8074-hk-cpu.dtsi"
   8 #include "ipq8074-ess.dtsi"
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/input/input.h>
  11 #include <dt-bindings/leds/common.h>
  12
  13 / {
  14         model = "Arcadyan AW1000";
  15         compatible = "arcadyan,aw1000", "qcom,ipq8074";
  16
  17         aliases {
  18                 led-boot = &led_power;
  19                 led-failsafe = &led_power;
  20                 led-running = &led_power;
  21                 led-upgrade = &led_power;
  22                 serial0 = &blsp1_uart5;
  23                 /*
  24                  * Aliases as required by u-boot
  25                  * to patch MAC addresses
  26                  */
  27                 ethernet0 = &dp1;
  28                 ethernet1 = &dp2;
  29                 ethernet2 = &dp3;
  30                 ethernet3 = &dp4;
  31                 ethernet4 = &dp6_syn;
  32                 label-mac-device = &dp1;
  33         };
  34
  35         chosen {
  36                 stdout-path = "serial0:115200n8";
  37                 bootargs-append = " root=/dev/ubiblock0_1";
  38         };
  39
  40         gpio-export {
  41                 compatible = "gpio-export";
  42
  43                 lte-pwrkey {
  44                         gpio-export,name = "lte_pwrkey";
  45                         gpio-export,output = <1>;
  46                         gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
  47                 };
  48
  49                 lte-power {
  50                         gpio-export,name = "lte_power";
  51                         gpio-export,output = <1>;
  52                         gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
  53                 };
  54
  55                 lte-reset {
  56                         gpio-export,name = "lte_reset";
  57                         gpio-export,output = <1>;
  58                         gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>;
  59                 };
  60
  61                 usb-vbus {
  62                         gpio-export,name = "usb_vbus";
  63                         gpio-export,output = <0>;
  64                         gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
  65                 };
  66         };
  67
  68         keys {
  69                 compatible = "gpio-keys";
  70
  71                 wlan {
  72                         label = "wlan";
  73                         linux,code = <KEY_WLAN>;
  74                         gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
  75                 };
  76
  77                 wps {
  78                         label = "wps";
  79                         linux,code = <KEY_WPS_BUTTON>;
  80                         gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
  81                 };
  82
  83                 reset {
  84                         label = "reset";
  85                         linux,code = <KEY_RESTART>;
  86                         gpios = <&tlmm 67 GPIO_ACTIVE_LOW>;
  87                 };
  88         };
  89
  90         led-spi {
  91                 compatible = "spi-gpio";
  92                 #address-cells = <1>;
  93                 #size-cells = <0>;
  94
  95                 sck-gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
  96                 mosi-gpios = <&tlmm 19 GPIO_ACTIVE_HIGH>;
  97
  98                 led_gpio: led-gpio@0 {
  99                         compatible = "fairchild,74hc595";
 100                         reg = <0>;
 101                         gpio-controller;
 102                         #gpio-cells = <2>;
 103                         registers-number = <2>;
 104                         spi-max-frequency = <1000000>;
 105                         enable-gpios = <&tlmm 20 GPIO_ACTIVE_HIGH>;
 106                 };
 107         };
 108
 109         leds {
 110                 compatible = "gpio-leds";
 111
 112                 led_power: power {
 113                         function = LED_FUNCTION_POWER;
 114                         color = <LED_COLOR_ID_GREEN>;
 115                         gpios = <&led_gpio 0 GPIO_ACTIVE_HIGH>;
 116                 };
 117
 118                 wifi {
 119                         label = "green:wifi";
 120                         gpios = <&led_gpio 1 GPIO_ACTIVE_HIGH>;
 121                 };
 122
 123                 internet {
 124                         label = "green:internet";
 125                         gpios = <&led_gpio 2 GPIO_ACTIVE_HIGH>;
 126                 };
 127
 128                 5g-red {
 129                         label = "red:5g";
 130                         gpios = <&led_gpio 3 GPIO_ACTIVE_LOW>;
 131                 };
 132
 133                 5g-green {
 134                         label = "green:5g";
 135                         gpios = <&led_gpio 4 GPIO_ACTIVE_LOW>;
 136                 };
 137
 138                 5g-blue {
 139                         label = "blue:5g";
 140                         gpios = <&led_gpio 5 GPIO_ACTIVE_LOW>;
 141                 };
 142
 143                 signal-red {
 144                         label = "red:signal";
 145                         gpios = <&led_gpio 6 GPIO_ACTIVE_LOW>;
 146                 };
 147
 148                 signal-green {
 149                         label = "green:signal";
 150                         gpios = <&led_gpio 8 GPIO_ACTIVE_LOW>;
 151                 };
 152
 153                 signal-blue {
 154                         label = "blue:signal";
 155                         gpios = <&led_gpio 9 GPIO_ACTIVE_LOW>;
 156                 };
 157
 158                 phone {
 159                         label = "green:phone";
 160                         gpios = <&led_gpio 11 GPIO_ACTIVE_HIGH>;
 161                 };
 162         };
 163 };
 164
 165 &tlmm {
 166         mdio_pins: mdio-pins {
 167                 mdc {
 168                         pins = "gpio68";
 169                         function = "mdc";
 170                         drive-strength = <8>;
 171                         bias-pull-up;
 172                 };
 173
 174                 mdio {
 175                         pins = "gpio69";
 176                         function = "mdio";
 177                         drive-strength = <8>;
 178                         bias-pull-up;
 179                 };
 180         };
 181 };
 182
 183 &blsp1_uart5 {
 184         status = "okay";
 185 };
 186
 187 &cryptobam {
 188         status = "okay";
 189 };
 190
 191 &crypto {
 192         status = "okay";
 193 };
 194
 195 &prng {
 196         status = "okay";
 197 };
 198
 199 &qpic_bam {
 200         status = "okay";
 201 };
 202
 203 &qpic_nand {
 204         status = "okay";
 205
 206         nand@0 {
 207                 reg = <0>;
 208                 nand-ecc-strength = <8>;
 209                 nand-ecc-step-size = <512>;
 210                 nand-bus-width = <8>;
 211
 212                 partitions {
 213                         compatible = "qcom,smem-part";
 214                 };
 215         };
 216 };
 217
 218 &qusb_phy_0 {
 219         status = "okay";
 220 };
 221
 222 &qusb_phy_1 {
 223         status = "okay";
 224 };
 225
 226 &ssphy_0 {
 227         status = "okay";
 228 };
 229
 230 &ssphy_1 {
 231         status = "okay";
 232 };
 233
 234 &usb_0 {
 235         status = "okay";
 236 };
 237
 238 &usb_1 {
 239         status = "okay";
 240 };
 241
 242 &mdio {
 243         status = "okay";
 244
 245         pinctrl-0 = <&mdio_pins>;
 246         pinctrl-names = "default";
 247         reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 248
 249         ethernet-phy-package@0 {
 250                 compatible = "qcom,qca8075-package";
 251                 #address-cells = <1>;
 252                 #size-cells = <0>;
 253                 reg = <0>;
 254
 255                 qcom,package-mode = "qsgmii";
 256
 257                 qca8075_0: ethernet-phy@0 {
 258                         compatible = "ethernet-phy-ieee802.3-c22";
 259                         reg = <0>;
 260                 };
 261
 262                 qca8075_1: ethernet-phy@1 {
 263                         compatible = "ethernet-phy-ieee802.3-c22";
 264                         reg = <1>;
 265                 };
 266
 267                 qca8075_2: ethernet-phy@2 {
 268                         compatible = "ethernet-phy-ieee802.3-c22";
 269                         reg = <2>;
 270                 };
 271
 272                 qca8075_3: ethernet-phy@3 {
 273                         compatible = "ethernet-phy-ieee802.3-c22";
 274                         reg = <3>;
 275                 };
 276         };
 277
 278         qca8081: ethernet-phy@28 {
 279                 compatible = "ethernet-phy-id004d.d101";
 280                 reg = <28>;
 281                 reset-deassert-us = <10000>;
 282                 reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
 283
 284                 leds {
 285                         #address-cells = <1>;
 286                         #size-cells = <0>;
 287
 288                         led@2 {
 289                                 reg = <2>;
 290                                 active-low;
 291                                 color = <LED_COLOR_ID_GREEN>;
 292                                 function = LED_FUNCTION_WAN;
 293                                 default-state = "keep";
 294                         };
 295                 };
 296         };
 297 };
 298
 299 &switch {
 300         status = "okay";
 301
 302         switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>; /* lan port bitmap */
 303         switch_wan_bmp = <ESS_PORT6>; /* wan port bitmap */
 304         switch_mac_mode = <MAC_MODE_QSGMII>; /* mac mode for uniphy instance0*/
 305         switch_mac_mode2 = <MAC_MODE_SGMII_PLUS>; /* mac mode for uniphy instance2*/
 306
 307         qcom,port_phyinfo {
 308                 port@1 {
 309                         port_id = <1>;
 310                         phy_address = <0>;
 311                 };
 312                 port@2 {
 313                         port_id = <2>;
 314                         phy_address = <1>;
 315                 };
 316                 port@3 {
 317                         port_id = <3>;
 318                         phy_address = <2>;
 319                 };
 320                 port@4 {
 321                         port_id = <4>;
 322                         phy_address = <3>;
 323                 };
 324                 port@6 {
 325                         port_id = <6>;
 326                         phy_address = <28>;
 327                         port_mac_sel = "QGMAC_PORT";
 328                 };
 329         };
 330 };
 331
 332 &edma {
 333         status = "okay";
 334 };
 335
 336 &dp1 {
 337         status = "okay";
 338         phy-mode = "qsgmii";
 339         phy-handle = <&qca8075_0>;
 340         label = "lan1";
 341 };
 342
 343 &dp2 {
 344         status = "okay";
 345         phy-mode = "qsgmii";
 346         phy-handle = <&qca8075_1>;
 347         label = "lan2";
 348 };
 349
 350 &dp3 {
 351         status = "okay";
 352         phy-mode = "qsgmii";
 353         phy-handle = <&qca8075_2>;
 354         label = "lan3";
 355 };
 356
 357 &dp4 {
 358         status = "okay";
 359         phy-mode = "qsgmii";
 360         phy-handle = <&qca8075_3>;
 361         label = "lan4";
 362 };
 363
 364 &dp6_syn {
 365         status = "okay";
 366         phy-handle = <&qca8081>;
 367         label = "wan";
 368 };
 369
 370 &wifi {
 371         status = "okay";
 372
 373         qcom,ath11k-calibration-variant = "Arcadyan-AW1000";
 374 };