Now that 6.1 is default, remove 5.15 support.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_BCM4908=y
-CONFIG_ARCH_BCMBCA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_PTR_AUTH_KERNEL=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_B53=y
-CONFIG_BCM4908_ENET=y
-CONFIG_BCM7038_WDT=y
-CONFIG_BCM7XXX_PHY=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_PMB=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_PM=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="earlycon=bcm63xx_uart,0xff800640 console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_REMAP=y
-CONFIG_DTC=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_BRCMSTB=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_LEDS_BCM63138=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BCM_UNIMAC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-# CONFIG_MITIGATE_SPECTRE_BRANCH_HISTORY is not set
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MTD_BRCM_U_BOOT=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND_BRCMNAND=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_OF_PARTS_BCM4908=y
-# CONFIG_MTD_OF_PARTS_LINKSYS_NS is not set
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_SPLIT_CFE_BOOTFS=y
-# CONFIG_MTD_SPLIT_SQUASHFS_ROOT is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_BCM_SF2=y
-CONFIG_NET_DSA_TAG_BRCM=y
-CONFIG_NET_DSA_TAG_BRCM_COMMON=y
-CONFIG_NET_DSA_TAG_BRCM_LEGACY=y
-CONFIG_NET_DSA_TAG_BRCM_PREPEND=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NO_IOPORT_MAP=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_NVMEM_SYSFS=y
-CONFIG_NVMEM_U_BOOT_ENV=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_BRCM_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM4908=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RATIONAL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELOCATABLE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
+++ /dev/null
-From d0ae9c944b9472c5691a482297df7a57d7fd1199 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 19 Aug 2021 14:11:08 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix NAND node name
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This matches nand-controller.yaml requirements.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -295,7 +295,7 @@
- status = "okay";
- };
-
-- nand@1800 {
-+ nand-controller@1800 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand";
+++ /dev/null
-From 7b0c9ca7f18e8d2e2cf3c342d91f037d436777bf Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 5 Nov 2021 11:14:12 +0100
-Subject: [PATCH] dt-bindings: arm: bcm: document Netgear RAXE500 binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-One more BCM4908 based device.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Rob Herring <robh@kernel.org>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4908.yaml
-@@ -29,6 +29,7 @@ properties:
- items:
- - enum:
- - asus,gt-ac5300
-+ - netgear,raxe500
- - const: brcm,bcm4908
-
- - description: BCM49408 based boards
+++ /dev/null
-From 72b1c5da796ec5266f2012c36470e226cb4f09c9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 30 Dec 2021 12:05:35 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add pinctrl binding
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Describe pinmux block with its maps.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm4908.dtsi | 135 ++++++++++++++++++
- 1 file changed, 135 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -286,6 +286,141 @@
- gpio-controller;
- };
-
-+ pinctrl@560 {
-+ compatible = "brcm,bcm4908-pinctrl";
-+ reg = <0x560 0x10>;
-+
-+ pins_led_0_a: led_0-a-pins {
-+ function = "led_0";
-+ groups = "led_0_grp_a";
-+ };
-+
-+ pins_led_1_a: led_1-a-pins {
-+ function = "led_1";
-+ groups = "led_1_grp_a";
-+ };
-+
-+ pins_led_2_a: led_2-a-pins {
-+ function = "led_2";
-+ groups = "led_2_grp_a";
-+ };
-+
-+ pins_led_3_a: led_3-a-pins {
-+ function = "led_3";
-+ groups = "led_3_grp_a";
-+ };
-+
-+ pins_led_4_a: led_4-a-pins {
-+ function = "led_4";
-+ groups = "led_4_grp_a";
-+ };
-+
-+ pins_led_5_a: led_5-a-pins {
-+ function = "led_5";
-+ groups = "led_5_grp_a";
-+ };
-+
-+ pins_led_6_a: led_6-a-pins {
-+ function = "led_6";
-+ groups = "led_6_grp_a";
-+ };
-+
-+ pins_led_7_a: led_7-a-pins {
-+ function = "led_7";
-+ groups = "led_7_grp_a";
-+ };
-+
-+ pins_led_8_a: led_8-a-pins {
-+ function = "led_8";
-+ groups = "led_8_grp_a";
-+ };
-+
-+ pins_led_9_a: led_9-a-pins {
-+ function = "led_9";
-+ groups = "led_9_grp_a";
-+ };
-+
-+ pins_led_21_a: led_21-a-pins {
-+ function = "led_21";
-+ groups = "led_21_grp_a";
-+ };
-+
-+ pins_led_22_a: led_22-a-pins {
-+ function = "led_22";
-+ groups = "led_22_grp_a";
-+ };
-+
-+ pins_led_26_a: led_26-a-pins {
-+ function = "led_26";
-+ groups = "led_26_grp_a";
-+ };
-+
-+ pins_led_27_a: led_27-a-pins {
-+ function = "led_27";
-+ groups = "led_27_grp_a";
-+ };
-+
-+ pins_led_28_a: led_28-a-pins {
-+ function = "led_28";
-+ groups = "led_28_grp_a";
-+ };
-+
-+ pins_led_29_a: led_29-a-pins {
-+ function = "led_29";
-+ groups = "led_29_grp_a";
-+ };
-+
-+ pins_led_30_a: led_30-a-pins {
-+ function = "led_30";
-+ groups = "led_30_grp_a";
-+ };
-+
-+ pins_hs_uart: hs_uart-pins {
-+ function = "hs_uart";
-+ groups = "hs_uart_grp";
-+ };
-+
-+ pins_i2c_a: i2c-a-pins {
-+ function = "i2c";
-+ groups = "i2c_grp_a";
-+ };
-+
-+ pins_i2c_b: i2c-b-pins {
-+ function = "i2c";
-+ groups = "i2c_grp_b";
-+ };
-+
-+ pins_i2s: i2s-pins {
-+ function = "i2s";
-+ groups = "i2s_grp";
-+ };
-+
-+ pins_nand_ctrl: nand_ctrl-pins {
-+ function = "nand_ctrl";
-+ groups = "nand_ctrl_grp";
-+ };
-+
-+ pins_nand_data: nand_data-pins {
-+ function = "nand_data";
-+ groups = "nand_data_grp";
-+ };
-+
-+ pins_emmc_ctrl: emmc_ctrl-pins {
-+ function = "emmc_ctrl";
-+ groups = "emmc_ctrl_grp";
-+ };
-+
-+ pins_usb0_pwr: usb0_pwr-pins {
-+ function = "usb0_pwr";
-+ groups = "usb0_pwr_grp";
-+ };
-+
-+ pins_usb1_pwr: usb1_pwr-pins {
-+ function = "usb1_pwr";
-+ groups = "usb1_pwr_grp";
-+ };
-+ };
-+
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
+++ /dev/null
-From 47513f6dd93b5b7d91143219c2c1fb883664ed13 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 9 Feb 2022 21:14:17 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add watchdog block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has the same watchdog as BCM63xx devices. Use "brcm,bcm6345-wdt"
-binding which matches the first SoC with that block.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -275,6 +275,15 @@
- twd: timer-mfd@400 {
- compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
- reg = <0x400 0x4c>;
-+ ranges = <0x0 0x400 0x4c>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ watchdog@28 {
-+ compatible = "brcm,bcm6345-wdt";
-+ reg = <0x28 0x8>;
-+ };
- };
-
- gpio0: gpio-controller@500 {
+++ /dev/null
-From ba5dfa2fd8d0aed4e4b6f650ba9e8ea7cdd6ead1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 15 Feb 2022 07:36:39 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add I2C block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 uses the same I2C hw as BCM63xx / BCM67xx / BCM68xx SoCs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -455,6 +455,15 @@
- };
- };
-
-+ i2c@2100 {
-+ compatible = "brcm,brcmper-i2c";
-+ reg = <0x2100 0x58>;
-+ clock-frequency = <97500>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pins_i2c_a>;
-+ status = "disabled";
-+ };
-+
- misc@2600 {
- compatible = "brcm,misc", "simple-mfd";
- reg = <0x2600 0xe4>;
+++ /dev/null
-From 82a58061ada60058ec00113c179380f945914709 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 8 Jun 2022 11:00:59 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM63146
-
-Add DTS for ARMv8 based broadband SoC BCM63146. bcm63146.dtsi is the
-SoC description DTS header and bcm963146.dts is a simple DTS file for
-Broadcom BCM963146 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
- .../boot/dts/broadcom/bcmbca/bcm63146.dtsi | 110 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm963146.dts | 30 +++++
- 3 files changed, 142 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -7,4 +7,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
- bcm4912-asus-gt-ax6000.dtb \
- bcm94912.dtb \
- bcm963158.dtb \
-- bcm96858.dtb
-+ bcm96858.dtb \
-+ bcm963146.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-@@ -0,0 +1,110 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+ compatible = "brcm,bcm63146", "brcm,bcmbca";
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
-+ interrupt-parent = <&gic>;
-+
-+ cpus {
-+ #address-cells = <2>;
-+ #size-cells = <0>;
-+
-+ B53_0: cpu@0 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x0>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ B53_1: cpu@1 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x1>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ L2_0: l2-cache0 {
-+ compatible = "cache";
-+ };
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
-+ pmu: pmu {
-+ compatible = "arm,cortex-a53-pmu";
-+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-affinity = <&B53_0>, <&B53_1>;
-+ };
-+
-+ clocks: clocks {
-+ periph_clk: periph-clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <200000000>;
-+ };
-+ uart_clk: uart-clk {
-+ compatible = "fixed-factor-clock";
-+ #clock-cells = <0>;
-+ clocks = <&periph_clk>;
-+ clock-div = <4>;
-+ clock-mult = <1>;
-+ };
-+ };
-+
-+ psci {
-+ compatible = "arm,psci-0.2";
-+ method = "smc";
-+ };
-+
-+ axi@81000000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+ gic: interrupt-controller@1000 {
-+ compatible = "arm,gic-400";
-+ #interrupt-cells = <3>;
-+ interrupt-controller;
-+ reg = <0x1000 0x1000>,
-+ <0x2000 0x2000>,
-+ <0x4000 0x2000>,
-+ <0x6000 0x2000>;
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_LEVEL_HIGH)>;
-+ };
-+ };
-+
-+ bus@ff800000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+ uart0: serial@12000 {
-+ compatible = "arm,pl011", "arm,primecell";
-+ reg = <0x12000 0x1000>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&uart_clk>, <&uart_clk>;
-+ clock-names = "uartclk", "apb_pclk";
-+ status = "disabled";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm63146.dtsi"
-+
-+/ {
-+ model = "Broadcom BCM963146 Reference Board";
-+ compatible = "brcm,bcm963146", "brcm,bcm63146", "brcm,bcmbca";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0x0 0x0 0x0 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
+++ /dev/null
-From 64eca7ad058cff861b48cdead8dee40dfc284e9e Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 8 Jun 2022 11:04:36 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6856
-
-Add DTS for ARMv8 based broadband SoC BCM6856. bcm6856.dtsi is the
-SoC description DTS header and bcm96856.dts is a simple DTS file for
-Broadcom BCM96956 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
- .../boot/dts/broadcom/bcmbca/bcm6856.dtsi | 103 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm96856.dts | 30 +++++
- 3 files changed, 135 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -8,4 +8,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
- bcm94912.dtb \
- bcm963158.dtb \
- bcm96858.dtb \
-- bcm963146.dtb
-+ bcm963146.dtb \
-+ bcm96856.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-@@ -0,0 +1,103 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+ compatible = "brcm,bcm6856", "brcm,bcmbca";
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
-+ interrupt-parent = <&gic>;
-+
-+ cpus {
-+ #address-cells = <2>;
-+ #size-cells = <0>;
-+
-+ B53_0: cpu@0 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x0>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ B53_1: cpu@1 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x1>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ L2_0: l2-cache0 {
-+ compatible = "cache";
-+ };
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
-+ pmu: pmu {
-+ compatible = "arm,cortex-a53-pmu";
-+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-affinity = <&B53_0>, <&B53_1>;
-+ };
-+
-+ clocks: clocks {
-+ periph_clk:periph-clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <200000000>;
-+ };
-+ };
-+
-+ psci {
-+ compatible = "arm,psci-0.2";
-+ method = "smc";
-+ };
-+
-+ axi@81000000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+ gic: interrupt-controller@1000 {
-+ compatible = "arm,gic-400";
-+ #interrupt-cells = <3>;
-+ interrupt-controller;
-+ reg = <0x1000 0x1000>, /* GICD */
-+ <0x2000 0x2000>, /* GICC */
-+ <0x4000 0x2000>, /* GICH */
-+ <0x6000 0x2000>; /* GICV */
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
-+ IRQ_TYPE_LEVEL_HIGH)>;
-+ };
-+ };
-+
-+ bus@ff800000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+ uart0: serial@640 {
-+ compatible = "brcm,bcm6345-uart";
-+ reg = <0x640 0x18>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&periph_clk>;
-+ clock-names = "refclk";
-+ status = "disabled";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm6856.dtsi"
-+
-+/ {
-+ model = "Broadcom BCM96856 Reference Board";
-+ compatible = "brcm,bcm96856", "brcm,bcm6856", "brcm,bcmbca";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0x0 0x0 0x0 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
+++ /dev/null
-From eab6bb0994b806525fc5e362e8b865f61c4a9e20 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Thu, 9 Jun 2022 17:15:33 -0700
-Subject: [PATCH] arm64: dts: Add DTS files for bcmbca SoC BCM6813
-
-Add DTS for ARMv8 based broadband SoC BCM6813. bcm6813.dtsi is the
-SoC description DTS header and bcm96813.dts is a simple DTS file for
-Broadcom BCM96813 Reference board that only enable the UART port.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 3 +-
- .../boot/dts/broadcom/bcmbca/bcm6813.dtsi | 128 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm96813.dts | 30 ++++
- 3 files changed, 160 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -9,4 +9,5 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
- bcm963158.dtb \
- bcm96858.dtb \
- bcm963146.dtb \
-- bcm96856.dtb
-+ bcm96856.dtb \
-+ bcm96813.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-@@ -0,0 +1,128 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+
-+/ {
-+ compatible = "brcm,bcm6813", "brcm,bcmbca";
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
-+ interrupt-parent = <&gic>;
-+
-+ cpus {
-+ #address-cells = <2>;
-+ #size-cells = <0>;
-+
-+ B53_0: cpu@0 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x0>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ B53_1: cpu@1 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x1>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ B53_2: cpu@2 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x2>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ B53_3: cpu@3 {
-+ compatible = "brcm,brahma-b53";
-+ device_type = "cpu";
-+ reg = <0x0 0x3>;
-+ next-level-cache = <&L2_0>;
-+ enable-method = "psci";
-+ };
-+
-+ L2_0: l2-cache0 {
-+ compatible = "cache";
-+ };
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
-+ pmu: pmu {
-+ compatible = "arm,cortex-a53-pmu";
-+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-affinity = <&B53_0>, <&B53_1>,
-+ <&B53_2>, <&B53_3>;
-+ };
-+
-+ clocks: clocks {
-+ periph_clk: periph-clk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <200000000>;
-+ };
-+ uart_clk: uart-clk {
-+ compatible = "fixed-factor-clock";
-+ #clock-cells = <0>;
-+ clocks = <&periph_clk>;
-+ clock-div = <4>;
-+ clock-mult = <1>;
-+ };
-+ };
-+
-+ psci {
-+ compatible = "arm,psci-0.2";
-+ method = "smc";
-+ };
-+
-+ axi@81000000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x0 0x0 0x81000000 0x8000>;
-+
-+ gic: interrupt-controller@1000 {
-+ compatible = "arm,gic-400";
-+ #interrupt-cells = <3>;
-+ interrupt-controller;
-+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-+ reg = <0x1000 0x1000>,
-+ <0x2000 0x2000>,
-+ <0x4000 0x2000>,
-+ <0x6000 0x2000>;
-+ };
-+ };
-+
-+ bus@ff800000 {
-+ compatible = "simple-bus";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ ranges = <0x0 0x0 0xff800000 0x800000>;
-+
-+ uart0: serial@12000 {
-+ compatible = "arm,pl011", "arm,primecell";
-+ reg = <0x12000 0x1000>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&uart_clk>, <&uart_clk>;
-+ clock-names = "uartclk", "apb_pclk";
-+ status = "disabled";
-+ };
-+ };
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm6813.dtsi"
-+
-+/ {
-+ model = "Broadcom BCM96813 Reference Board";
-+ compatible = "brcm,bcm96813", "brcm,bcm6813", "brcm,bcmbca";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0x0 0x0 0x0 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
+++ /dev/null
-From ea559c81b61603d4044df6f826f10a832c42c98c Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Wed, 15 Jun 2022 17:52:59 -0700
-Subject: [PATCH] arm64: dts: broadcom: align gpio-key node names with dtschema
-
-The node names should be generic and DT schema expects certain pattern
-(e.g. with key/button/switch).
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20220616005333.18491-6-krzysztof.kozlowski@linaro.org
----
- .../broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts | 8 ++++----
- .../boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts | 8 ++++----
- 2 files changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-@@ -83,25 +83,25 @@
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
-- brightness {
-+ key-brightness {
- label = "LEDs";
- linux,code = <KEY_BRIGHTNESS_ZERO>;
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
- };
-
-- wps {
-+ key-wps {
- label = "WPS";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- };
-
-- wifi {
-+ key-wifi {
- label = "WiFi";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
- };
-
-- restart {
-+ key-restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-@@ -18,25 +18,25 @@
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
-- wifi {
-+ key-wifi {
- label = "WiFi";
- linux,code = <KEY_RFKILL>;
- gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
- };
-
-- wps {
-+ key-wps {
- label = "WPS";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
-
-- restart {
-+ key-restart {
- label = "Reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
- };
-
-- brightness {
-+ key-brightness {
- label = "LEDs";
- linux,code = <KEY_BRIGHTNESS_ZERO>;
- gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+++ /dev/null
-From b4a544e415e9be33b37d9bfa9d9f9f4d13f553d6 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Fri, 8 Jul 2022 11:25:06 -0700
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: Fix timer node for BCM4906 SoC
-
-The cpu mask value in interrupt property inherits from bcm4908.dtsi
-which sets to four cpus. Correct the value to two cpus for dual core
-BCM4906 SoC.
-
-Fixes: c8b404fb05dc ("arm64: dts: broadcom: bcm4908: add BCM4906 Netgear R8000P DTS files")
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
-@@ -17,6 +17,14 @@
- <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
- };
-
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
-+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
-+ };
-+
- pmu {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+++ /dev/null
-From fdcd652ce2b6b819f5c4dc3cead5215c84ee6933 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 1 Jun 2022 15:56:50 -0700
-Subject: [PATCH] arm64: bcmbca: add arch bcmbca machine entry
-
-Add ARCH_BCMBCA config for Broadcom Broadband SoC chipsets
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/Kconfig.platforms | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/Kconfig.platforms
-+++ b/arch/arm64/Kconfig.platforms
-@@ -65,6 +65,15 @@ config ARCH_BCM_IPROC
- help
- This enables support for Broadcom iProc based SoCs
-
-+config ARCH_BCMBCA
-+ bool "Broadcom Broadband SoC"
-+ help
-+ Say Y if you intend to run the kernel on a Broadcom Broadband ARM-based
-+ BCA chipset.
-+
-+ This enables support for Broadcom BCA ARM-based broadband chipsets,
-+ including the DSL, PON and Wireless family of chips.
-+
- config ARCH_BERLIN
- bool "Marvell Berlin SoC Family"
- select DW_APB_ICTL
+++ /dev/null
-From 456b6dd1baadd2da10e28ffd1717b06d1fa17a97 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 18 Jul 2022 15:20:58 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add remaining LED pins
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Include all 32 pins.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220718132100.13277-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm4908.dtsi | 75 +++++++++++++++++++
- 1 file changed, 75 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -349,6 +349,61 @@
- groups = "led_9_grp_a";
- };
-
-+ pins_led_10_a: led_10-a-pins {
-+ function = "led_10";
-+ groups = "led_10_grp_a";
-+ };
-+
-+ pins_led_11_a: led_11-a-pins {
-+ function = "led_11";
-+ groups = "led_11_grp_a";
-+ };
-+
-+ pins_led_12_a: led_12-a-pins {
-+ function = "led_12";
-+ groups = "led_12_grp_a";
-+ };
-+
-+ pins_led_13_a: led_13-a-pins {
-+ function = "led_13";
-+ groups = "led_13_grp_a";
-+ };
-+
-+ pins_led_14_a: led_14-a-pins {
-+ function = "led_14";
-+ groups = "led_14_grp_a";
-+ };
-+
-+ pins_led_15_a: led_15-a-pins {
-+ function = "led_15";
-+ groups = "led_15_grp_a";
-+ };
-+
-+ pins_led_16_a: led_16-a-pins {
-+ function = "led_16";
-+ groups = "led_16_grp_a";
-+ };
-+
-+ pins_led_17_a: led_17-a-pins {
-+ function = "led_17";
-+ groups = "led_17_grp_a";
-+ };
-+
-+ pins_led_18_a: led_18-a-pins {
-+ function = "led_18";
-+ groups = "led_18_grp_a";
-+ };
-+
-+ pins_led_19_a: led_19-a-pins {
-+ function = "led_19";
-+ groups = "led_19_grp_a";
-+ };
-+
-+ pins_led_20_a: led_20-a-pins {
-+ function = "led_20";
-+ groups = "led_20_grp_a";
-+ };
-+
- pins_led_21_a: led_21-a-pins {
- function = "led_21";
- groups = "led_21_grp_a";
-@@ -359,6 +414,21 @@
- groups = "led_22_grp_a";
- };
-
-+ pins_led_23_a: led_23-a-pins {
-+ function = "led_23";
-+ groups = "led_23_grp_a";
-+ };
-+
-+ pins_led_24_a: led_24-a-pins {
-+ function = "led_24";
-+ groups = "led_24_grp_a";
-+ };
-+
-+ pins_led_25_a: led_25-a-pins {
-+ function = "led_25";
-+ groups = "led_25_grp_a";
-+ };
-+
- pins_led_26_a: led_26-a-pins {
- function = "led_26";
- groups = "led_26_grp_a";
-@@ -384,6 +454,11 @@
- groups = "led_30_grp_a";
- };
-
-+ pins_led_31_a: led_31-a-pins {
-+ function = "led_31";
-+ groups = "led_31_grp_a";
-+ };
-+
- pins_hs_uart: hs_uart-pins {
- function = "hs_uart";
- groups = "hs_uart_grp";
+++ /dev/null
-From 7de56b1dc1149c702d4cc1e89ccc251bfb2bc246 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 18 Jul 2022 15:20:59 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add LEDs controller block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 includes LEDs controller that supports multiple brightness
-levels & hardware blinking.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220718132100.13277-2-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -514,6 +514,14 @@
- status = "okay";
- };
-
-+ leds: leds@800 {
-+ compatible = "brcm,bcm4908-leds", "brcm,bcm63138-leds";
-+ reg = <0x800 0xdc>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ };
-+
- nand-controller@1800 {
- #address-cells = <1>;
- #size-cells = <0>;
+++ /dev/null
-From 3bcae3396e986b4ab97a69e8de517e32f9691a4b Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 18 Jul 2022 15:21:00 +0200
-Subject: [PATCH] arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-There are 5 software-controllable LEDs on PCB.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220718132100.13277-3-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../bcmbca/bcm4908-asus-gt-ac5300.dts | 48 +++++++++++++++++++
- 1 file changed, 48 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-@@ -2,6 +2,7 @@
-
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-
- #include "bcm4908.dtsi"
-
-@@ -118,6 +119,53 @@
- };
- };
-
-+&leds {
-+ led-power@11 {
-+ reg = <0x11>;
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_WHITE>;
-+ default-state = "on";
-+ active-low;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pins_led_17_a>;
-+ };
-+
-+ led-wan-red@12 {
-+ reg = <0x12>;
-+ function = LED_FUNCTION_WAN;
-+ color = <LED_COLOR_ID_RED>;
-+ active-low;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pins_led_18_a>;
-+ };
-+
-+ led-wps@14 {
-+ reg = <0x14>;
-+ function = LED_FUNCTION_WPS;
-+ color = <LED_COLOR_ID_WHITE>;
-+ active-low;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pins_led_20_a>;
-+ };
-+
-+ led-wan-white@15 {
-+ reg = <0x15>;
-+ function = LED_FUNCTION_WAN;
-+ color = <LED_COLOR_ID_WHITE>;
-+ active-low;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pins_led_21_a>;
-+ };
-+
-+ led-lan@19 {
-+ reg = <0x19>;
-+ function = LED_FUNCTION_LAN;
-+ color = <LED_COLOR_ID_WHITE>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pins_led_25_a>;
-+ };
-+};
-+
- &nandcs {
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
+++ /dev/null
-From 4fdcbde682291fba2c3f45a41decd656d92a314f Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 3 Aug 2022 10:54:49 -0700
-Subject: [PATCH] arm64: dts: bcmbca: update BCM4908 board dts files
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Append "brcm,bcmbca" to compatible strings based on the new bcmbca
-binding rule for BCM4908 family based boards.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Acked-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220803175455.47638-4-william.zhang@broadcom.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts | 2 +-
- .../dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts | 2 +-
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts | 2 +-
- .../arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
-@@ -7,7 +7,7 @@
- #include "bcm4906.dtsi"
-
- / {
-- compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908";
-+ compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
- model = "Netgear R8000P";
-
- memory@0 {
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-@@ -7,7 +7,7 @@
- #include "bcm4906.dtsi"
-
- / {
-- compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908";
-+ compatible = "tplink,archer-c2300-v1", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
- model = "TP-Link Archer C2300 V1";
-
- memory@0 {
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-@@ -7,7 +7,7 @@
- #include "bcm4908.dtsi"
-
- / {
-- compatible = "asus,gt-ac5300", "brcm,bcm4908";
-+ compatible = "asus,gt-ac5300", "brcm,bcm4908", "brcm,bcmbca";
- model = "Asus GT-AC5300";
-
- memory@0 {
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
-@@ -3,7 +3,7 @@
- #include "bcm4908.dtsi"
-
- / {
-- compatible = "netgear,raxe500", "brcm,bcm4908";
-+ compatible = "netgear,raxe500", "brcm,bcm4908", "brcm,bcmbca";
- model = "Netgear RAXE500";
-
- memory@0 {
+++ /dev/null
-From 72e0bdb6d7edb1785d58f2e8e7c80e1d2f93a319 Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Wed, 3 Aug 2022 10:54:51 -0700
-Subject: [PATCH] arm64: dts: Add BCM4908 generic board dts
-
-Add generic bare bone bcm94908.dts file to support any 4908 based
-design. It supports cpu subsystem, memory and an uart console. This can
-be useful for board bring-up and cpu subsystem and memory related kernel
-test as well.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Link: https://lore.kernel.org/r/20220803175455.47638-6-william.zhang@broadcom.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 1 +
- .../boot/dts/broadcom/bcmbca/bcm94908.dts | 30 +++++++++++++++++++
- 2 files changed, 31 insertions(+)
- create mode 100644 arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
-@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
- bcm4906-tplink-archer-c2300-v1.dtb \
- bcm4908-asus-gt-ac5300.dtb \
- bcm4908-netgear-raxe500.dtb \
-+ bcm94908.dtb \
- bcm4912-asus-gt-ax6000.dtb \
- bcm94912.dtb \
- bcm963158.dtb \
---- /dev/null
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-@@ -0,0 +1,30 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright 2022 Broadcom Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "bcm4908.dtsi"
-+
-+/ {
-+ model = "Broadcom BCM94908 Reference Board";
-+ compatible = "brcm,bcm94908", "brcm,bcm4908", "brcm,bcmbca";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ memory@0 {
-+ device_type = "memory";
-+ reg = <0x0 0x0 0x0 0x08000000>;
-+ };
-+};
-+
-+&uart0 {
-+ status = "okay";
-+};
+++ /dev/null
-From 68064196cffea33f090bd2e8d81cd5e20107ecf1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 3 Nov 2022 11:53:16 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TWD block timer
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 TWD contains block with 4 timers. Add binding for it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221103105316.21294-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -280,6 +280,11 @@
- #address-cells = <1>;
- #size-cells = <1>;
-
-+ timer@0 {
-+ compatible = "brcm,bcm63138-timer";
-+ reg = <0x0 0x28>;
-+ };
-+
- watchdog@28 {
- compatible = "brcm,bcm6345-wdt";
- reg = <0x28 0x8>;
+++ /dev/null
-From 4f9fb09175e87a233787a2dee1e5dabb14deb022 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 3 Nov 2022 12:00:15 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm6858: add TWD block
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM6858 contains TWD block with timers, watchdog, and reset subblocks.
-Describe it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221103110015.21761-1-zajec5@gmail.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 19 +++++++++++++++++++
- 1 file changed, 19 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-@@ -109,6 +109,25 @@
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x62000>;
-
-+ twd: timer-mfd@400 {
-+ compatible = "brcm,bcm4908-twd", "simple-mfd", "syscon";
-+ reg = <0x400 0x4c>;
-+ ranges = <0x0 0x400 0x4c>;
-+
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ timer@0 {
-+ compatible = "brcm,bcm63138-timer";
-+ reg = <0x0 0x28>;
-+ };
-+
-+ watchdog@28 {
-+ compatible = "brcm,bcm6345-wdt";
-+ reg = <0x28 0x8>;
-+ };
-+ };
-+
- uart0: serial@640 {
- compatible = "brcm,bcm6345-uart";
- reg = <0x640 0x18>;
+++ /dev/null
-From e567e58d6819adc002c57b81e16b88da24d3b4aa Mon Sep 17 00:00:00 2001
-From: Pierre Gondois <pierre.gondois@arm.com>
-Date: Tue, 22 Nov 2022 17:32:07 +0100
-Subject: [PATCH] arm64: dts: Update cache properties for broadcom
-
-The DeviceTree Specification v0.3 specifies that the cache node
-'compatible' and 'cache-level' properties are 'required'. Cf.
-s3.8 Multi-level and Shared Cache Nodes
-The 'cache-unified' property should be present if one of the
-properties for unified cache is present ('cache-size', ...).
-
-Update the Device Trees accordingly.
-
-Acked-by: William Zhang <william.zhang@broadcom.com>
-Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
-Link: https://lore.kernel.org/r/20221122163208.3810985-3-pierre.gondois@arm.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 1 +
- arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi | 4 ++++
- 9 files changed, 12 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -63,6 +63,7 @@
-
- l2: l2-cache0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-@@ -51,6 +51,7 @@
-
- L2_0: l2-cache0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-@@ -35,6 +35,7 @@
-
- L2_0: l2-cache0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-@@ -51,6 +51,7 @@
-
- L2_0: l2-cache0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-@@ -51,6 +51,7 @@
-
- L2_0: l2-cache0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-@@ -35,6 +35,7 @@
-
- L2_0: l2-cache0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-@@ -50,6 +50,7 @@
- };
- L2_0: l2-cache0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
-@@ -79,6 +79,7 @@
-
- CLUSTER0_L2: l2-cache@0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
---- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
-@@ -108,18 +108,22 @@
-
- CLUSTER0_L2: l2-cache@0 {
- compatible = "cache";
-+ cache-level = <2>;
- };
-
- CLUSTER1_L2: l2-cache@100 {
- compatible = "cache";
-+ cache-level = <2>;
- };
-
- CLUSTER2_L2: l2-cache@200 {
- compatible = "cache";
-+ cache-level = <2>;
- };
-
- CLUSTER3_L2: l2-cache@300 {
- compatible = "cache";
-+ cache-level = <2>;
- };
- };
-
+++ /dev/null
-From f5d83b714e304d5f3229da434af2eeea033c4f5d Mon Sep 17 00:00:00 2001
-From: William Zhang <william.zhang@broadcom.com>
-Date: Mon, 6 Feb 2023 22:58:15 -0800
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: Add spi controller node
-
-Add support for HSSPI controller in ARMv8 chip dts files.
-
-Signed-off-by: William Zhang <william.zhang@broadcom.com>
-Link: https://lore.kernel.org/r/20230207065826.285013-5-william.zhang@broadcom.com
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm4908.dtsi | 18 +++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm4912.dtsi | 20 +++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm63146.dtsi | 19 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm63158.dtsi | 19 ++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm6813.dtsi | 20 +++++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm6856.dtsi | 18 +++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm6858.dtsi | 18 +++++++++++++++++
- .../boot/dts/broadcom/bcmbca/bcm94908.dts | 4 ++++
- .../boot/dts/broadcom/bcmbca/bcm94912.dts | 4 ++++
- .../boot/dts/broadcom/bcmbca/bcm963146.dts | 4 ++++
- .../boot/dts/broadcom/bcmbca/bcm963158.dts | 4 ++++
- .../boot/dts/broadcom/bcmbca/bcm96813.dts | 4 ++++
- .../boot/dts/broadcom/bcmbca/bcm96856.dts | 4 ++++
- .../boot/dts/broadcom/bcmbca/bcm96858.dts | 4 ++++
- 14 files changed, 160 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -107,6 +107,12 @@
- clock-frequency = <50000000>;
- clock-output-names = "periph";
- };
-+
-+ hsspi_pll: hsspi-pll {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <400000000>;
-+ };
- };
-
- soc {
-@@ -528,6 +534,18 @@
- #size-cells = <0>;
- };
-
-+ hsspi: spi@1000{
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,bcm4908-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+ reg = <0x1000 0x600>;
-+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&hsspi_pll &hsspi_pll>;
-+ clock-names = "hsspi", "pll";
-+ num-cs = <8>;
-+ status = "disabled";
-+ };
-+
- nand-controller@1800 {
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4912.dtsi
-@@ -79,6 +79,7 @@
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-+
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
-@@ -86,6 +87,12 @@
- clock-div = <4>;
- clock-mult = <1>;
- };
-+
-+ hsspi_pll: hsspi-pll {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <200000000>;
-+ };
- };
-
- psci {
-@@ -117,6 +124,19 @@
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
-+ hsspi: spi@1000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,bcm4912-hsspi", "brcm,bcmbca-hsspi-v1.1";
-+ reg = <0x1000 0x600>, <0x2610 0x4>;
-+ reg-names = "hsspi", "spim-ctrl";
-+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&hsspi_pll &hsspi_pll>;
-+ clock-names = "hsspi", "pll";
-+ num-cs = <8>;
-+ status = "disabled";
-+ };
-+
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63146.dtsi
-@@ -60,6 +60,7 @@
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-+
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
-@@ -67,6 +68,12 @@
- clock-div = <4>;
- clock-mult = <1>;
- };
-+
-+ hsspi_pll: hsspi-pll {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <200000000>;
-+ };
- };
-
- psci {
-@@ -99,6 +106,18 @@
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
-+ hsspi: spi@1000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,bcm63146-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+ reg = <0x1000 0x600>;
-+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&hsspi_pll &hsspi_pll>;
-+ clock-names = "hsspi", "pll";
-+ num-cs = <8>;
-+ status = "disabled";
-+ };
-+
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm63158.dtsi
-@@ -79,6 +79,7 @@
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-+
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
-@@ -86,6 +87,12 @@
- clock-div = <4>;
- clock-mult = <1>;
- };
-+
-+ hsspi_pll: hsspi-pll {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <400000000>;
-+ };
- };
-
- psci {
-@@ -117,6 +124,18 @@
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
-+ hsspi: spi@1000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,bcm63158-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+ reg = <0x1000 0x600>;
-+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&hsspi_pll &hsspi_pll>;
-+ clock-names = "hsspi", "pll";
-+ num-cs = <8>;
-+ status = "disabled";
-+ };
-+
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6813.dtsi
-@@ -79,6 +79,7 @@
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-+
- uart_clk: uart-clk {
- compatible = "fixed-factor-clock";
- #clock-cells = <0>;
-@@ -86,6 +87,12 @@
- clock-div = <4>;
- clock-mult = <1>;
- };
-+
-+ hsspi_pll: hsspi-pll {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <200000000>;
-+ };
- };
-
- psci {
-@@ -117,6 +124,19 @@
- #size-cells = <1>;
- ranges = <0x0 0x0 0xff800000 0x800000>;
-
-+ hsspi: spi@1000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,bcm6813-hsspi", "brcm,bcmbca-hsspi-v1.1";
-+ reg = <0x1000 0x600>, <0x2610 0x4>;
-+ reg-names = "hsspi", "spim-ctrl";
-+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&hsspi_pll &hsspi_pll>;
-+ clock-names = "hsspi", "pll";
-+ num-cs = <8>;
-+ status = "disabled";
-+ };
-+
- uart0: serial@12000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x12000 0x1000>;
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6856.dtsi
-@@ -60,6 +60,12 @@
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-+
-+ hsspi_pll: hsspi-pll {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <400000000>;
-+ };
- };
-
- psci {
-@@ -100,5 +106,17 @@
- clock-names = "refclk";
- status = "disabled";
- };
-+
-+ hsspi: spi@1000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,bcm6856-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+ reg = <0x1000 0x600>;
-+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&hsspi_pll &hsspi_pll>;
-+ clock-names = "hsspi", "pll";
-+ num-cs = <8>;
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm6858.dtsi
-@@ -78,6 +78,12 @@
- #clock-cells = <0>;
- clock-frequency = <200000000>;
- };
-+
-+ hsspi_pll: hsspi-pll {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <400000000>;
-+ };
- };
-
- psci {
-@@ -137,5 +143,17 @@
- clock-names = "refclk";
- status = "disabled";
- };
-+
-+ hsspi: spi@1000 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "brcm,bcm6858-hsspi", "brcm,bcmbca-hsspi-v1.0";
-+ reg = <0x1000 0x600>;
-+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&hsspi_pll &hsspi_pll>;
-+ clock-names = "hsspi", "pll";
-+ num-cs = <8>;
-+ status = "disabled";
-+ };
- };
- };
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94908.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&hsspi {
-+ status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm94912.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&hsspi {
-+ status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963146.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&hsspi {
-+ status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm963158.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&hsspi {
-+ status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96813.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&hsspi {
-+ status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96856.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&hsspi {
-+ status = "okay";
-+};
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm96858.dts
-@@ -28,3 +28,7 @@
- &uart0 {
- status = "okay";
- };
-+
-+&hsspi {
-+ status = "okay";
-+};
+++ /dev/null
-From 23be9f68f933adee8163b8efc9c6bff71410cc7c Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:43:59 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: fix LED nodenames
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes:
-arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dtb: leds@800: 'led-lan@19', 'led-power@11', 'led-wan-red@12', 'led-wan-white@15', 'led-wps@14' do not match any of the regexes: '^led@[a-f0-9]+$', 'pinctrl-[0-9]+'
- From schema: Documentation/devicetree/bindings/leds/leds-bcm63138.yaml
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144400.21689-2-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
-@@ -120,7 +120,7 @@
- };
-
- &leds {
-- led-power@11 {
-+ led@11 {
- reg = <0x11>;
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_WHITE>;
-@@ -130,7 +130,7 @@
- pinctrl-0 = <&pins_led_17_a>;
- };
-
-- led-wan-red@12 {
-+ led@12 {
- reg = <0x12>;
- function = LED_FUNCTION_WAN;
- color = <LED_COLOR_ID_RED>;
-@@ -139,7 +139,7 @@
- pinctrl-0 = <&pins_led_18_a>;
- };
-
-- led-wps@14 {
-+ led@14 {
- reg = <0x14>;
- function = LED_FUNCTION_WPS;
- color = <LED_COLOR_ID_WHITE>;
-@@ -148,7 +148,7 @@
- pinctrl-0 = <&pins_led_20_a>;
- };
-
-- led-wan-white@15 {
-+ led@15 {
- reg = <0x15>;
- function = LED_FUNCTION_WAN;
- color = <LED_COLOR_ID_WHITE>;
-@@ -157,7 +157,7 @@
- pinctrl-0 = <&pins_led_21_a>;
- };
-
-- led-lan@19 {
-+ led@19 {
- reg = <0x19>;
- function = LED_FUNCTION_LAN;
- color = <LED_COLOR_ID_WHITE>;
+++ /dev/null
-From 477cad715de1dfc256a20da3ed83b62f3cb2944d Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:45:18 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add on-SoC USB ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has 3 USB controllers each with 2 USB ports. Home routers often
-have LEDs indicating state of selected USB ports. Describe those SoC USB
-ports to allow using them as LED trigger sources.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144520.21816-1-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../boot/dts/broadcom/bcmbca/bcm4908.dtsi | 39 +++++++++++++++++++
- 1 file changed, 39 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -148,6 +148,19 @@
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb_phy PHY_TYPE_USB2>;
- status = "disabled";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ehci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ehci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
- };
-
- ohci: usb@c400 {
-@@ -156,6 +169,19 @@
- interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb_phy PHY_TYPE_USB2>;
- status = "disabled";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ ohci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ ohci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
- };
-
- xhci: usb@d000 {
-@@ -164,6 +190,19 @@
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&usb_phy PHY_TYPE_USB3>;
- status = "disabled";
-+
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ xhci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+
-+ xhci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
- };
-
- bus@80000 {
+++ /dev/null
-From 889e53ccccc29ff4bf8d4c89cca34e8768845747 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:45:19 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add Netgear R8000P USB
- LED triggers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device has 2 USB LEDs meant to be triggered by devices in relevant
-USB ports.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144520.21816-2-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
-@@ -58,12 +58,16 @@
- function = "usb2";
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- led-usb3 {
- function = "usb3";
- color = <LED_COLOR_ID_WHITE>;
- gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- led-wifi {
+++ /dev/null
-From e6d356b146b75f1f77621aab7950a1eb550859f9 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 28 Feb 2023 15:45:20 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: add TP-Link C2300 USB
- LED triggers
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This device has 2 USB LEDs meant to be triggered by devices in relevant
-USB ports.
-
-While at it fix typo in USB LED name.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/all/20230228144520.21816-3-zajec5@gmail.com/
-Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
----
- .../dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
-@@ -64,12 +64,16 @@
- function = "usb2";
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
-+ linux,default-trigger = "usbport";
- };
-
- led-usb3 {
-- function = "usbd3";
-+ function = "usb3";
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+ trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
-+ linux,default-trigger = "usbport";
- };
-
- led-brightness {
+++ /dev/null
-From 002181f5b150e60c77f21de7ad4dd10e4614cd91 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 11 Jul 2022 17:30:41 +0200
-Subject: [PATCH] mtd: parsers: add Broadcom's U-Boot parser
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom stores environment variables blocks inside U-Boot partition
-itself. This driver finds & registers them.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
-Link: https://lore.kernel.org/linux-mtd/20220711153041.6036-2-zajec5@gmail.com
----
- drivers/mtd/parsers/Kconfig | 10 ++++
- drivers/mtd/parsers/Makefile | 1 +
- drivers/mtd/parsers/brcm_u-boot.c | 84 +++++++++++++++++++++++++++++++
- 3 files changed, 95 insertions(+)
- create mode 100644 drivers/mtd/parsers/brcm_u-boot.c
-
---- a/drivers/mtd/parsers/Kconfig
-+++ b/drivers/mtd/parsers/Kconfig
-@@ -20,6 +20,16 @@ config MTD_BCM63XX_PARTS
- This provides partition parsing for BCM63xx devices with CFE
- bootloaders.
-
-+config MTD_BRCM_U_BOOT
-+ tristate "Broadcom's U-Boot partition parser"
-+ depends on ARCH_BCM4908 || COMPILE_TEST
-+ help
-+ Broadcom uses a custom way of storing U-Boot environment variables.
-+ They are placed inside U-Boot partition itself at unspecified offset.
-+ It's possible to locate them by looking for a custom header with a
-+ magic value. This driver does that and creates subpartitions for
-+ each found environment variables block.
-+
- config MTD_CMDLINE_PARTS
- tristate "Command line partition table parsing"
- depends on MTD
---- a/drivers/mtd/parsers/Makefile
-+++ b/drivers/mtd/parsers/Makefile
-@@ -2,6 +2,7 @@
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
-+obj-$(CONFIG_MTD_BRCM_U_BOOT) += brcm_u-boot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
---- /dev/null
-+++ b/drivers/mtd/parsers/brcm_u-boot.c
-@@ -0,0 +1,84 @@
-+// SPDX-License-Identifier: GPL-2.0-only
-+/*
-+ * Copyright © 2022 Rafał Miłecki <rafal@milecki.pl>
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+
-+#define BRCM_U_BOOT_MAX_OFFSET 0x200000
-+#define BRCM_U_BOOT_STEP 0x1000
-+
-+#define BRCM_U_BOOT_MAX_PARTS 2
-+
-+#define BRCM_U_BOOT_MAGIC 0x75456e76 /* uEnv */
-+
-+struct brcm_u_boot_header {
-+ __le32 magic;
-+ __le32 length;
-+} __packed;
-+
-+static const char *names[BRCM_U_BOOT_MAX_PARTS] = {
-+ "u-boot-env",
-+ "u-boot-env-backup",
-+};
-+
-+static int brcm_u_boot_parse(struct mtd_info *mtd,
-+ const struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ struct brcm_u_boot_header header;
-+ struct mtd_partition *parts;
-+ size_t bytes_read;
-+ size_t offset;
-+ int err;
-+ int i = 0;
-+
-+ parts = kcalloc(BRCM_U_BOOT_MAX_PARTS, sizeof(*parts), GFP_KERNEL);
-+ if (!parts)
-+ return -ENOMEM;
-+
-+ for (offset = 0;
-+ offset < min_t(size_t, mtd->size, BRCM_U_BOOT_MAX_OFFSET);
-+ offset += BRCM_U_BOOT_STEP) {
-+ err = mtd_read(mtd, offset, sizeof(header), &bytes_read, (uint8_t *)&header);
-+ if (err && !mtd_is_bitflip(err)) {
-+ pr_err("Failed to read from %s at 0x%zx: %d\n", mtd->name, offset, err);
-+ continue;
-+ }
-+
-+ if (le32_to_cpu(header.magic) != BRCM_U_BOOT_MAGIC)
-+ continue;
-+
-+ parts[i].name = names[i];
-+ parts[i].offset = offset;
-+ parts[i].size = sizeof(header) + le32_to_cpu(header.length);
-+ i++;
-+ pr_info("offset:0x%zx magic:0x%08x BINGO\n", offset, header.magic);
-+
-+ if (i == BRCM_U_BOOT_MAX_PARTS)
-+ break;
-+ }
-+
-+ *pparts = parts;
-+
-+ return i;
-+};
-+
-+static const struct of_device_id brcm_u_boot_of_match_table[] = {
-+ { .compatible = "brcm,u-boot" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, brcm_u_boot_of_match_table);
-+
-+static struct mtd_part_parser brcm_u_boot_mtd_parser = {
-+ .parse_fn = brcm_u_boot_parse,
-+ .name = "brcm_u-boot",
-+ .of_match_table = brcm_u_boot_of_match_table,
-+};
-+module_mtd_part_parser(brcm_u_boot_mtd_parser);
-+
-+MODULE_LICENSE("GPL");
+++ /dev/null
-From af30f8eaa8fe4ff1987280f716309711997bd979 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 29 Dec 2021 18:16:42 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: refactor LED regs access
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs.
-2. Add helper for handling non-lineral port <-> reg mappings.
-3. Add support for 12 B LED reg blocks on BCM4908 (different layout)
-
-Complete support for LEDs setup will be implemented once Linux receives
-a proper design & implementation for "hardware" LEDs.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Link: https://lore.kernel.org/r/20211229171642.22942-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/dsa/bcm_sf2.c | 54 ++++++++++++++++++++++++----
- drivers/net/dsa/bcm_sf2.h | 10 ++++++
- drivers/net/dsa/bcm_sf2_regs.h | 65 +++++++++++++++++++++++++++++++---
- 3 files changed, 119 insertions(+), 10 deletions(-)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -62,6 +62,38 @@ static u16 bcm_sf2_reg_rgmii_cntrl(struc
- return REG_SWITCH_STATUS;
- }
-
-+static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
-+{
-+ switch (port) {
-+ case 0:
-+ return REG_LED_0_CNTRL;
-+ case 1:
-+ return REG_LED_1_CNTRL;
-+ case 2:
-+ return REG_LED_2_CNTRL;
-+ }
-+
-+ switch (priv->type) {
-+ case BCM4908_DEVICE_ID:
-+ switch (port) {
-+ case 3:
-+ return REG_LED_3_CNTRL;
-+ case 7:
-+ return REG_LED_4_CNTRL;
-+ default:
-+ break;
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ WARN_ONCE(1, "Unsupported port %d\n", port);
-+
-+ /* RO fallback reg */
-+ return REG_SWITCH_STATUS;
-+}
-+
- /* Return the number of active ports, not counting the IMP (CPU) port */
- static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
- {
-@@ -187,9 +219,14 @@ static void bcm_sf2_gphy_enable_set(stru
-
- /* Use PHY-driven LED signaling */
- if (!enable) {
-- reg = reg_readl(priv, REG_LED_CNTRL(0));
-- reg |= SPDLNK_SRC_SEL;
-- reg_writel(priv, reg, REG_LED_CNTRL(0));
-+ u16 led_ctrl = bcm_sf2_reg_led_base(priv, 0);
-+
-+ if (priv->type == BCM7278_DEVICE_ID ||
-+ priv->type == BCM7445_DEVICE_ID) {
-+ reg = reg_led_readl(priv, led_ctrl, 0);
-+ reg |= LED_CNTRL_SPDLNK_SRC_SEL;
-+ reg_led_writel(priv, reg, led_ctrl, 0);
-+ }
- }
- }
-
-@@ -1247,9 +1284,14 @@ static const u16 bcm_sf2_4908_reg_offset
- [REG_SPHY_CNTRL] = 0x24,
- [REG_CROSSBAR] = 0xc8,
- [REG_RGMII_11_CNTRL] = 0x014c,
-- [REG_LED_0_CNTRL] = 0x40,
-- [REG_LED_1_CNTRL] = 0x4c,
-- [REG_LED_2_CNTRL] = 0x58,
-+ [REG_LED_0_CNTRL] = 0x40,
-+ [REG_LED_1_CNTRL] = 0x4c,
-+ [REG_LED_2_CNTRL] = 0x58,
-+ [REG_LED_3_CNTRL] = 0x64,
-+ [REG_LED_4_CNTRL] = 0x88,
-+ [REG_LED_5_CNTRL] = 0xa0,
-+ [REG_LED_AGGREGATE_CTRL] = 0xb8,
-+
- };
-
- static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
---- a/drivers/net/dsa/bcm_sf2.h
-+++ b/drivers/net/dsa/bcm_sf2.h
-@@ -210,6 +210,16 @@ SF2_IO_MACRO(acb);
- SWITCH_INTR_L2(0);
- SWITCH_INTR_L2(1);
-
-+static inline u32 reg_led_readl(struct bcm_sf2_priv *priv, u16 off, u16 reg)
-+{
-+ return readl_relaxed(priv->reg + priv->reg_offsets[off] + reg);
-+}
-+
-+static inline void reg_led_writel(struct bcm_sf2_priv *priv, u32 val, u16 off, u16 reg)
-+{
-+ writel_relaxed(val, priv->reg + priv->reg_offsets[off] + reg);
-+}
-+
- /* RXNFC */
- int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
- struct ethtool_rxnfc *nfc, u32 *rule_locs);
---- a/drivers/net/dsa/bcm_sf2_regs.h
-+++ b/drivers/net/dsa/bcm_sf2_regs.h
-@@ -25,6 +25,10 @@ enum bcm_sf2_reg_offs {
- REG_LED_0_CNTRL,
- REG_LED_1_CNTRL,
- REG_LED_2_CNTRL,
-+ REG_LED_3_CNTRL,
-+ REG_LED_4_CNTRL,
-+ REG_LED_5_CNTRL,
-+ REG_LED_AGGREGATE_CTRL,
- REG_SWITCH_REG_MAX,
- };
-
-@@ -56,6 +60,63 @@ enum bcm_sf2_reg_offs {
- #define CROSSBAR_BCM4908_EXT_GPHY4 1
- #define CROSSBAR_BCM4908_EXT_RGMII 2
-
-+/* Relative to REG_LED_*_CNTRL (BCM7278, BCM7445) */
-+#define LED_CNTRL_NO_LINK_ENCODE_SHIFT 0
-+#define LED_CNTRL_M10_ENCODE_SHIFT 2
-+#define LED_CNTRL_M100_ENCODE_SHIFT 4
-+#define LED_CNTRL_M1000_ENCODE_SHIFT 6
-+#define LED_CNTRL_SEL_NO_LINK_ENCODE_SHIFT 8
-+#define LED_CNTRL_SEL_10M_ENCODE_SHIFT 10
-+#define LED_CNTRL_SEL_100M_ENCODE_SHIFT 12
-+#define LED_CNTRL_SEL_1000M_ENCODE_SHIFT 14
-+#define LED_CNTRL_RX_DV_EN (1 << 16)
-+#define LED_CNTRL_TX_EN_EN (1 << 17)
-+#define LED_CNTRL_SPDLNK_LED0_ACT_SEL_SHIFT 18
-+#define LED_CNTRL_SPDLNK_LED1_ACT_SEL_SHIFT 20
-+#define LED_CNTRL_ACT_LED_ACT_SEL_SHIFT 22
-+#define LED_CNTRL_SPDLNK_SRC_SEL (1 << 24)
-+#define LED_CNTRL_SPDLNK_LED0_ACT_POL_SEL (1 << 25)
-+#define LED_CNTRL_SPDLNK_LED1_ACT_POL_SEL (1 << 26)
-+#define LED_CNTRL_ACT_LED_POL_SEL (1 << 27)
-+#define LED_CNTRL_MASK 0x3
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_CTRL 0x0
-+#define LED_CTRL_RX_ACT_EN 0x00000001
-+#define LED_CTRL_TX_ACT_EN 0x00000002
-+#define LED_CTRL_SPDLNK_LED0_ACT_SEL 0x00000004
-+#define LED_CTRL_SPDLNK_LED1_ACT_SEL 0x00000008
-+#define LED_CTRL_SPDLNK_LED2_ACT_SEL 0x00000010
-+#define LED_CTRL_ACT_LED_ACT_SEL 0x00000020
-+#define LED_CTRL_SPDLNK_LED0_ACT_POL_SEL 0x00000040
-+#define LED_CTRL_SPDLNK_LED1_ACT_POL_SEL 0x00000080
-+#define LED_CTRL_SPDLNK_LED2_ACT_POL_SEL 0x00000100
-+#define LED_CTRL_ACT_LED_POL_SEL 0x00000200
-+#define LED_CTRL_LED_SPD_OVRD 0x00001c00
-+#define LED_CTRL_LNK_STATUS_OVRD 0x00002000
-+#define LED_CTRL_SPD_OVRD_EN 0x00004000
-+#define LED_CTRL_LNK_OVRD_EN 0x00008000
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_LINK_SPEED_ENC_SEL 0x4
-+#define LED_LINK_SPEED_ENC_SEL_NO_LINK_SHIFT 0
-+#define LED_LINK_SPEED_ENC_SEL_10M_SHIFT 3
-+#define LED_LINK_SPEED_ENC_SEL_100M_SHIFT 6
-+#define LED_LINK_SPEED_ENC_SEL_1000M_SHIFT 9
-+#define LED_LINK_SPEED_ENC_SEL_2500M_SHIFT 12
-+#define LED_LINK_SPEED_ENC_SEL_10G_SHIFT 15
-+#define LED_LINK_SPEED_ENC_SEL_MASK 0x7
-+
-+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
-+#define REG_LED_LINK_SPEED_ENC 0x8
-+#define LED_LINK_SPEED_ENC_NO_LINK_SHIFT 0
-+#define LED_LINK_SPEED_ENC_M10_SHIFT 3
-+#define LED_LINK_SPEED_ENC_M100_SHIFT 6
-+#define LED_LINK_SPEED_ENC_M1000_SHIFT 9
-+#define LED_LINK_SPEED_ENC_M2500_SHIFT 12
-+#define LED_LINK_SPEED_ENC_M10G_SHIFT 15
-+#define LED_LINK_SPEED_ENC_MASK 0x7
-+
- /* Relative to REG_RGMII_CNTRL */
- #define RGMII_MODE_EN (1 << 0)
- #define ID_MODE_DIS (1 << 1)
-@@ -73,10 +134,6 @@ enum bcm_sf2_reg_offs {
- #define LPI_COUNT_SHIFT 9
- #define LPI_COUNT_MASK 0x3F
-
--#define REG_LED_CNTRL(x) (REG_LED_0_CNTRL + (x))
--
--#define SPDLNK_SRC_SEL (1 << 24)
--
- /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
- #define INTRL2_CPU_STATUS 0x00
- #define INTRL2_CPU_SET 0x04
+++ /dev/null
-From e93a766da57fff3273bcb618edf5dfca1fb86b89 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 15 Sep 2022 15:30:13 +0200
-Subject: [PATCH] net: broadcom: bcm4908_enet: handle -EPROBE_DEFER when
- getting MAC
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Reading MAC from OF may return -EPROBE_DEFER if underlaying NVMEM device
-isn't ready yet. In such case pass that error code up and "wait" to be
-probed later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20220915133013.2243-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -720,6 +720,8 @@ static int bcm4908_enet_probe(struct pla
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
- err = of_get_ethdev_address(dev->of_node, netdev);
-+ if (err == -EPROBE_DEFER)
-+ goto err_dma_free;
- if (err)
- eth_hw_addr_random(netdev);
- netdev->netdev_ops = &bcm4908_enet_netdev_ops;
-@@ -730,14 +732,17 @@ static int bcm4908_enet_probe(struct pla
- netif_napi_add(netdev, &enet->rx_ring.napi, bcm4908_enet_poll_rx, NAPI_POLL_WEIGHT);
-
- err = register_netdev(netdev);
-- if (err) {
-- bcm4908_enet_dma_free(enet);
-- return err;
-- }
-+ if (err)
-+ goto err_dma_free;
-
- platform_set_drvdata(pdev, enet);
-
- return 0;
-+
-+err_dma_free:
-+ bcm4908_enet_dma_free(enet);
-+
-+ return err;
- }
-
- static int bcm4908_enet_remove(struct platform_device *pdev)
+++ /dev/null
-From 3a1cc23a75abcd9cea585eb84846507363d58397 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 25 Oct 2022 15:22:45 +0200
-Subject: [PATCH] net: broadcom: bcm4908_enet: use build_skb()
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-RX code can be more efficient with the build_skb(). Allocating actual
-SKB around eth packet buffer - right before passing it up - results in
-a better cache usage.
-
-Without RPS (echo 0 > rps_cpus) BCM4908 NAT masq performance "jumps"
-between two speeds: ~900 Mbps and 940 Mbps (it's a 4 CPUs SoC). This
-change bumps the lower speed from 905 Mb/s to 918 Mb/s (tested using
-single stream iperf 2.0.5 traffic).
-
-There are more optimizations to consider. One obvious to try is GRO
-however as BCM4908 doesn't do hw csum is may actually lower performance.
-Sometimes. Some early testing:
-
-┌─────────────────────────────────┬─────────────────────┬────────────────────┐
-│ │ netif_receive_skb() │ napi_gro_receive() │
-├─────────────────────────────────┼─────────────────────┼────────────────────┤
-│ netdev_alloc_skb() │ 905 Mb/s │ 892 Mb/s │
-│ napi_alloc_frag() + build_skb() │ 918 Mb/s │ 917 Mb/s │
-└─────────────────────────────────┴─────────────────────┴────────────────────┘
-
-Another ideas:
-1. napi_build_skb()
-2. skb_copy_from_linear_data() for small packets
-
-Those need proper testing first though. That can be done later.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221025132245.22871-1-zajec5@gmail.com
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 53 +++++++++++++-------
- 1 file changed, 36 insertions(+), 17 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -36,13 +36,24 @@
- #define ENET_MAX_ETH_OVERHEAD (ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \
- ETH_FCS_LEN + 4) /* 32 */
-
-+#define ENET_RX_SKB_BUF_SIZE (NET_SKB_PAD + NET_IP_ALIGN + \
-+ ETH_HLEN + BRCM_MAX_TAG_LEN + VLAN_HLEN + \
-+ ENET_MTU_MAX + ETH_FCS_LEN + 4)
-+#define ENET_RX_SKB_BUF_ALLOC_SIZE (SKB_DATA_ALIGN(ENET_RX_SKB_BUF_SIZE) + \
-+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
-+#define ENET_RX_BUF_DMA_OFFSET (NET_SKB_PAD + NET_IP_ALIGN)
-+#define ENET_RX_BUF_DMA_SIZE (ENET_RX_SKB_BUF_SIZE - ENET_RX_BUF_DMA_OFFSET)
-+
- struct bcm4908_enet_dma_ring_bd {
- __le32 ctl;
- __le32 addr;
- } __packed;
-
- struct bcm4908_enet_dma_ring_slot {
-- struct sk_buff *skb;
-+ union {
-+ void *buf; /* RX */
-+ struct sk_buff *skb; /* TX */
-+ };
- unsigned int len;
- dma_addr_t dma_addr;
- };
-@@ -260,22 +271,21 @@ static int bcm4908_enet_dma_alloc_rx_buf
- u32 tmp;
- int err;
-
-- slot->len = ENET_MTU_MAX + ENET_MAX_ETH_OVERHEAD;
--
-- slot->skb = netdev_alloc_skb(enet->netdev, slot->len);
-- if (!slot->skb)
-+ slot->buf = napi_alloc_frag(ENET_RX_SKB_BUF_ALLOC_SIZE);
-+ if (!slot->buf)
- return -ENOMEM;
-
-- slot->dma_addr = dma_map_single(dev, slot->skb->data, slot->len, DMA_FROM_DEVICE);
-+ slot->dma_addr = dma_map_single(dev, slot->buf + ENET_RX_BUF_DMA_OFFSET,
-+ ENET_RX_BUF_DMA_SIZE, DMA_FROM_DEVICE);
- err = dma_mapping_error(dev, slot->dma_addr);
- if (err) {
- dev_err(dev, "Failed to map DMA buffer: %d\n", err);
-- kfree_skb(slot->skb);
-- slot->skb = NULL;
-+ skb_free_frag(slot->buf);
-+ slot->buf = NULL;
- return err;
- }
-
-- tmp = slot->len << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
-+ tmp = ENET_RX_BUF_DMA_SIZE << DMA_CTL_LEN_DESC_BUFLENGTH_SHIFT;
- tmp |= DMA_CTL_STATUS_OWN;
- if (idx == enet->rx_ring.length - 1)
- tmp |= DMA_CTL_STATUS_WRAP;
-@@ -315,11 +325,11 @@ static void bcm4908_enet_dma_uninit(stru
-
- for (i = rx_ring->length - 1; i >= 0; i--) {
- slot = &rx_ring->slots[i];
-- if (!slot->skb)
-+ if (!slot->buf)
- continue;
- dma_unmap_single(dev, slot->dma_addr, slot->len, DMA_FROM_DEVICE);
-- kfree_skb(slot->skb);
-- slot->skb = NULL;
-+ skb_free_frag(slot->buf);
-+ slot->buf = NULL;
- }
- }
-
-@@ -575,6 +585,7 @@ static int bcm4908_enet_poll_rx(struct n
- while (handled < weight) {
- struct bcm4908_enet_dma_ring_bd *buf_desc;
- struct bcm4908_enet_dma_ring_slot slot;
-+ struct sk_buff *skb;
- u32 ctl;
- int len;
- int err;
-@@ -598,16 +609,24 @@ static int bcm4908_enet_poll_rx(struct n
-
- if (len < ETH_ZLEN ||
- (ctl & (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) != (DMA_CTL_STATUS_SOP | DMA_CTL_STATUS_EOP)) {
-- kfree_skb(slot.skb);
-+ skb_free_frag(slot.buf);
- enet->netdev->stats.rx_dropped++;
- break;
- }
-
-- dma_unmap_single(dev, slot.dma_addr, slot.len, DMA_FROM_DEVICE);
-+ dma_unmap_single(dev, slot.dma_addr, ENET_RX_BUF_DMA_SIZE, DMA_FROM_DEVICE);
-+
-+ skb = build_skb(slot.buf, ENET_RX_SKB_BUF_ALLOC_SIZE);
-+ if (unlikely(!skb)) {
-+ skb_free_frag(slot.buf);
-+ enet->netdev->stats.rx_dropped++;
-+ break;
-+ }
-+ skb_reserve(skb, ENET_RX_BUF_DMA_OFFSET);
-+ skb_put(skb, len - ETH_FCS_LEN);
-+ skb->protocol = eth_type_trans(skb, enet->netdev);
-
-- skb_put(slot.skb, len - ETH_FCS_LEN);
-- slot.skb->protocol = eth_type_trans(slot.skb, enet->netdev);
-- netif_receive_skb(slot.skb);
-+ netif_receive_skb(skb);
-
- enet->netdev->stats.rx_packets++;
- enet->netdev->stats.rx_bytes += len;
+++ /dev/null
-From 471ef777ec79baadc5cd9773d08f95f49cf5e2b1 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 31 Oct 2022 11:48:56 +0100
-Subject: [PATCH] net: broadcom: bcm4908_enet: report queued and transmitted
- bytes
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This allows BQL to operate avoiding buffer bloat and reducing latency.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Link: https://lore.kernel.org/r/20221031104856.32388-1-zajec5@gmail.com
-Signed-off-by: Jakub Kicinski <kuba@kernel.org>
----
- drivers/net/ethernet/broadcom/bcm4908_enet.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm4908_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm4908_enet.c
-@@ -505,6 +505,7 @@ static int bcm4908_enet_stop(struct net_
- netif_carrier_off(netdev);
- napi_disable(&rx_ring->napi);
- napi_disable(&tx_ring->napi);
-+ netdev_reset_queue(netdev);
-
- bcm4908_enet_dma_rx_ring_disable(enet, &enet->rx_ring);
- bcm4908_enet_dma_tx_ring_disable(enet, &enet->tx_ring);
-@@ -564,6 +565,8 @@ static int bcm4908_enet_start_xmit(struc
- if (ring->write_idx + 1 == ring->length - 1)
- tmp |= DMA_CTL_STATUS_WRAP;
-
-+ netdev_sent_queue(enet->netdev, skb->len);
-+
- buf_desc->addr = cpu_to_le32((uint32_t)slot->dma_addr);
- buf_desc->ctl = cpu_to_le32(tmp);
-
-@@ -671,6 +674,7 @@ static int bcm4908_enet_poll_tx(struct n
- tx_ring->read_idx = 0;
- }
-
-+ netdev_completed_queue(enet->netdev, handled, bytes);
- enet->netdev->stats.tx_packets += handled;
- enet->netdev->stats.tx_bytes += bytes;
-
+++ /dev/null
-From 7b5730f0ff24b0d7d1cb660a482384a807618a46 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 24 Jan 2022 11:22:42 +0100
-Subject: [PATCH] dt-bindings: pinctrl: Add binding for BCM4908 pinctrl
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It's hardware block that is part of every SoC from BCM4908 family.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20220124102243.14912-1-zajec5@gmail.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- .../pinctrl/brcm,bcm4908-pinctrl.yaml | 72 +++++++++++++++++++
- MAINTAINERS | 7 ++
- 2 files changed, 79 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-@@ -0,0 +1,72 @@
-+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/pinctrl/brcm,bcm4908-pinctrl.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Broadcom BCM4908 pin controller
-+
-+maintainers:
-+ - Rafał Miłecki <rafal@milecki.pl>
-+
-+description:
-+ Binding for pin controller present on BCM4908 family SoCs.
-+
-+properties:
-+ compatible:
-+ const: brcm,bcm4908-pinctrl
-+
-+ reg:
-+ maxItems: 1
-+
-+patternProperties:
-+ '-pins$':
-+ type: object
-+ $ref: pinmux-node.yaml#
-+
-+ properties:
-+ function:
-+ enum: [ led_0, led_1, led_2, led_3, led_4, led_5, led_6, led_7, led_8,
-+ led_9, led_10, led_11, led_12, led_13, led_14, led_15, led_16,
-+ led_17, led_18, led_19, led_20, led_21, led_22, led_23, led_24,
-+ led_25, led_26, led_27, led_28, led_29, led_30, led_31,
-+ hs_uart, i2c, i2s, nand_ctrl, nand_data, emmc_ctrl, usb0_pwr,
-+ usb1_pwr ]
-+
-+ groups:
-+ minItems: 1
-+ maxItems: 2
-+ items:
-+ enum: [ led_0_grp_a, led_1_grp_a, led_2_grp_a, led_3_grp_a,
-+ led_4_grp_a, led_5_grp_a, led_6_grp_a, led_7_grp_a,
-+ led_8_grp_a, led_9_grp_a, led_10_grp_a, led_10_grp_b,
-+ led_11_grp_a, led_11_grp_b, led_12_grp_a, led_12_grp_b,
-+ led_13_grp_a, led_13_grp_b, led_14_grp_a, led_15_grp_a,
-+ led_16_grp_a, led_17_grp_a, led_18_grp_a, led_19_grp_a,
-+ led_20_grp_a, led_21_grp_a, led_22_grp_a, led_23_grp_a,
-+ led_24_grp_a, led_25_grp_a, led_26_grp_a, led_27_grp_a,
-+ led_28_grp_a, led_29_grp_a, led_30_grp_a, led_31_grp_a,
-+ led_31_grp_b, hs_uart_grp, i2c_grp_a, i2c_grp_b, i2s_grp,
-+ nand_ctrl_grp, nand_data_grp, emmc_ctrl_grp, usb0_pwr_grp,
-+ usb1_pwr_grp ]
-+
-+allOf:
-+ - $ref: pinctrl.yaml#
-+
-+required:
-+ - compatible
-+ - reg
-+
-+unevaluatedProperties: false
-+
-+examples:
-+ - |
-+ pinctrl@ff800560 {
-+ compatible = "brcm,bcm4908-pinctrl";
-+ reg = <0xff800560 0x10>;
-+
-+ led_0-a-pins {
-+ function = "led_0";
-+ groups = "led_0_grp_a";
-+ };
-+ };
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3573,6 +3573,13 @@ F: Documentation/devicetree/bindings/net
- F: drivers/net/ethernet/broadcom/bcm4908_enet.*
- F: drivers/net/ethernet/broadcom/unimac.h
-
-+BROADCOM BCM4908 PINMUX DRIVER
-+M: Rafał Miłecki <rafal@milecki.pl>
-+M: bcm-kernel-feedback-list@broadcom.com
-+L: linux-gpio@vger.kernel.org
-+S: Maintained
-+F: Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-+
- BROADCOM BCM5301X ARM ARCHITECTURE
- M: Hauke Mehrtens <hauke@hauke-m.de>
- M: Rafał Miłecki <zajec5@gmail.com>
+++ /dev/null
-From f7e322d99f1180270fb4a3e1ae992b3116cfcf34 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 24 Jan 2022 11:22:43 +0100
-Subject: [PATCH] pinctrl: bcm: add driver for BCM4908 pinmux
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 has its own pins layout so it needs a custom binding and a Linux
-driver.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
-Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.com
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- MAINTAINERS | 1 +
- drivers/pinctrl/bcm/Kconfig | 14 +
- drivers/pinctrl/bcm/Makefile | 1 +
- drivers/pinctrl/bcm/pinctrl-bcm4908.c | 563 ++++++++++++++++++++++++++
- 4 files changed, 579 insertions(+)
- create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm4908.c
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -3579,6 +3579,7 @@ M: bcm-kernel-feedback-list@broadcom.com
- L: linux-gpio@vger.kernel.org
- S: Maintained
- F: Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml
-+F: drivers/pinctrl/bcm/pinctrl-bcm4908.c
-
- BROADCOM BCM5301X ARM ARCHITECTURE
- M: Hauke Mehrtens <hauke@hauke-m.de>
---- a/drivers/pinctrl/bcm/Kconfig
-+++ b/drivers/pinctrl/bcm/Kconfig
-@@ -29,6 +29,20 @@ config PINCTRL_BCM2835
- help
- Say Y here to enable the Broadcom BCM2835 GPIO driver.
-
-+config PINCTRL_BCM4908
-+ tristate "Broadcom BCM4908 pinmux driver"
-+ depends on OF && (ARCH_BCM4908 || COMPILE_TEST)
-+ select PINMUX
-+ select PINCONF
-+ select GENERIC_PINCONF
-+ select GENERIC_PINCTRL_GROUPS
-+ select GENERIC_PINMUX_FUNCTIONS
-+ default ARCH_BCM4908
-+ help
-+ Driver for BCM4908 family SoCs with integrated pin controller.
-+
-+ If compiled as module it will be called pinctrl-bcm4908.
-+
- config PINCTRL_BCM63XX
- bool
- select PINMUX
---- a/drivers/pinctrl/bcm/Makefile
-+++ b/drivers/pinctrl/bcm/Makefile
-@@ -3,6 +3,7 @@
-
- obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
- obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
-+obj-$(CONFIG_PINCTRL_BCM4908) += pinctrl-bcm4908.o
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6318) += pinctrl-bcm6318.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
---- /dev/null
-+++ b/drivers/pinctrl/bcm/pinctrl-bcm4908.c
-@@ -0,0 +1,560 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/* Copyright (C) 2021 Rafał Miłecki <rafal@milecki.pl> */
-+
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/mod_devicetable.h>
-+#include <linux/module.h>
-+#include <linux/pinctrl/pinconf-generic.h>
-+#include <linux/pinctrl/pinctrl.h>
-+#include <linux/pinctrl/pinmux.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/string_helpers.h>
-+
-+#include "../core.h"
-+#include "../pinmux.h"
-+
-+#define BCM4908_NUM_PINS 86
-+
-+#define BCM4908_TEST_PORT_BLOCK_EN_LSB 0x00
-+#define BCM4908_TEST_PORT_BLOCK_DATA_MSB 0x04
-+#define BCM4908_TEST_PORT_BLOCK_DATA_LSB 0x08
-+#define BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT 12
-+#define BCM4908_TEST_PORT_COMMAND 0x0c
-+#define BCM4908_TEST_PORT_CMD_LOAD_MUX_REG 0x00000021
-+
-+struct bcm4908_pinctrl {
-+ struct device *dev;
-+ void __iomem *base;
-+ struct mutex mutex;
-+ struct pinctrl_dev *pctldev;
-+ struct pinctrl_desc pctldesc;
-+};
-+
-+/*
-+ * Groups
-+ */
-+
-+struct bcm4908_pinctrl_pin_setup {
-+ unsigned int number;
-+ unsigned int function;
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_0_pins_a[] = {
-+ { 0, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_1_pins_a[] = {
-+ { 1, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_2_pins_a[] = {
-+ { 2, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_3_pins_a[] = {
-+ { 3, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_4_pins_a[] = {
-+ { 4, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_5_pins_a[] = {
-+ { 5, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_6_pins_a[] = {
-+ { 6, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_7_pins_a[] = {
-+ { 7, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_8_pins_a[] = {
-+ { 8, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_9_pins_a[] = {
-+ { 9, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_10_pins_a[] = {
-+ { 10, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_11_pins_a[] = {
-+ { 11, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_12_pins_a[] = {
-+ { 12, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_13_pins_a[] = {
-+ { 13, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_14_pins_a[] = {
-+ { 14, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_15_pins_a[] = {
-+ { 15, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_16_pins_a[] = {
-+ { 16, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_17_pins_a[] = {
-+ { 17, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_18_pins_a[] = {
-+ { 18, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_19_pins_a[] = {
-+ { 19, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_20_pins_a[] = {
-+ { 20, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_21_pins_a[] = {
-+ { 21, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_22_pins_a[] = {
-+ { 22, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_23_pins_a[] = {
-+ { 23, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_24_pins_a[] = {
-+ { 24, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_25_pins_a[] = {
-+ { 25, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_26_pins_a[] = {
-+ { 26, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_27_pins_a[] = {
-+ { 27, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_28_pins_a[] = {
-+ { 28, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_29_pins_a[] = {
-+ { 29, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_30_pins_a[] = {
-+ { 30, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_31_pins_a[] = {
-+ { 31, 3 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_10_pins_b[] = {
-+ { 8, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_11_pins_b[] = {
-+ { 9, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_12_pins_b[] = {
-+ { 0, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_13_pins_b[] = {
-+ { 1, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup led_31_pins_b[] = {
-+ { 30, 2 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup hs_uart_pins[] = {
-+ { 10, 0 }, /* CTS */
-+ { 11, 0 }, /* RTS */
-+ { 12, 0 }, /* RXD */
-+ { 13, 0 }, /* TXD */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2c_pins_a[] = {
-+ { 18, 0 }, /* SDA */
-+ { 19, 0 }, /* SCL */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2c_pins_b[] = {
-+ { 22, 0 }, /* SDA */
-+ { 23, 0 }, /* SCL */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup i2s_pins[] = {
-+ { 27, 0 }, /* MCLK */
-+ { 28, 0 }, /* LRCK */
-+ { 29, 0 }, /* SDATA */
-+ { 30, 0 }, /* SCLK */
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup nand_ctrl_pins[] = {
-+ { 32, 0 },
-+ { 33, 0 },
-+ { 34, 0 },
-+ { 43, 0 },
-+ { 44, 0 },
-+ { 45, 0 },
-+ { 56, 1 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup nand_data_pins[] = {
-+ { 35, 0 },
-+ { 36, 0 },
-+ { 37, 0 },
-+ { 38, 0 },
-+ { 39, 0 },
-+ { 40, 0 },
-+ { 41, 0 },
-+ { 42, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup emmc_ctrl_pins[] = {
-+ { 46, 0 },
-+ { 47, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup usb0_pwr_pins[] = {
-+ { 63, 0 },
-+ { 64, 0 },
-+};
-+
-+static const struct bcm4908_pinctrl_pin_setup usb1_pwr_pins[] = {
-+ { 66, 0 },
-+ { 67, 0 },
-+};
-+
-+struct bcm4908_pinctrl_grp {
-+ const char *name;
-+ const struct bcm4908_pinctrl_pin_setup *pins;
-+ const unsigned int num_pins;
-+};
-+
-+static const struct bcm4908_pinctrl_grp bcm4908_pinctrl_grps[] = {
-+ { "led_0_grp_a", led_0_pins_a, ARRAY_SIZE(led_0_pins_a) },
-+ { "led_1_grp_a", led_1_pins_a, ARRAY_SIZE(led_1_pins_a) },
-+ { "led_2_grp_a", led_2_pins_a, ARRAY_SIZE(led_2_pins_a) },
-+ { "led_3_grp_a", led_3_pins_a, ARRAY_SIZE(led_3_pins_a) },
-+ { "led_4_grp_a", led_4_pins_a, ARRAY_SIZE(led_4_pins_a) },
-+ { "led_5_grp_a", led_5_pins_a, ARRAY_SIZE(led_5_pins_a) },
-+ { "led_6_grp_a", led_6_pins_a, ARRAY_SIZE(led_6_pins_a) },
-+ { "led_7_grp_a", led_7_pins_a, ARRAY_SIZE(led_7_pins_a) },
-+ { "led_8_grp_a", led_8_pins_a, ARRAY_SIZE(led_8_pins_a) },
-+ { "led_9_grp_a", led_9_pins_a, ARRAY_SIZE(led_9_pins_a) },
-+ { "led_10_grp_a", led_10_pins_a, ARRAY_SIZE(led_10_pins_a) },
-+ { "led_11_grp_a", led_11_pins_a, ARRAY_SIZE(led_11_pins_a) },
-+ { "led_12_grp_a", led_12_pins_a, ARRAY_SIZE(led_12_pins_a) },
-+ { "led_13_grp_a", led_13_pins_a, ARRAY_SIZE(led_13_pins_a) },
-+ { "led_14_grp_a", led_14_pins_a, ARRAY_SIZE(led_14_pins_a) },
-+ { "led_15_grp_a", led_15_pins_a, ARRAY_SIZE(led_15_pins_a) },
-+ { "led_16_grp_a", led_16_pins_a, ARRAY_SIZE(led_16_pins_a) },
-+ { "led_17_grp_a", led_17_pins_a, ARRAY_SIZE(led_17_pins_a) },
-+ { "led_18_grp_a", led_18_pins_a, ARRAY_SIZE(led_18_pins_a) },
-+ { "led_19_grp_a", led_19_pins_a, ARRAY_SIZE(led_19_pins_a) },
-+ { "led_20_grp_a", led_20_pins_a, ARRAY_SIZE(led_20_pins_a) },
-+ { "led_21_grp_a", led_21_pins_a, ARRAY_SIZE(led_21_pins_a) },
-+ { "led_22_grp_a", led_22_pins_a, ARRAY_SIZE(led_22_pins_a) },
-+ { "led_23_grp_a", led_23_pins_a, ARRAY_SIZE(led_23_pins_a) },
-+ { "led_24_grp_a", led_24_pins_a, ARRAY_SIZE(led_24_pins_a) },
-+ { "led_25_grp_a", led_25_pins_a, ARRAY_SIZE(led_25_pins_a) },
-+ { "led_26_grp_a", led_26_pins_a, ARRAY_SIZE(led_26_pins_a) },
-+ { "led_27_grp_a", led_27_pins_a, ARRAY_SIZE(led_27_pins_a) },
-+ { "led_28_grp_a", led_28_pins_a, ARRAY_SIZE(led_28_pins_a) },
-+ { "led_29_grp_a", led_29_pins_a, ARRAY_SIZE(led_29_pins_a) },
-+ { "led_30_grp_a", led_30_pins_a, ARRAY_SIZE(led_30_pins_a) },
-+ { "led_31_grp_a", led_31_pins_a, ARRAY_SIZE(led_31_pins_a) },
-+ { "led_10_grp_b", led_10_pins_b, ARRAY_SIZE(led_10_pins_b) },
-+ { "led_11_grp_b", led_11_pins_b, ARRAY_SIZE(led_11_pins_b) },
-+ { "led_12_grp_b", led_12_pins_b, ARRAY_SIZE(led_12_pins_b) },
-+ { "led_13_grp_b", led_13_pins_b, ARRAY_SIZE(led_13_pins_b) },
-+ { "led_31_grp_b", led_31_pins_b, ARRAY_SIZE(led_31_pins_b) },
-+ { "hs_uart_grp", hs_uart_pins, ARRAY_SIZE(hs_uart_pins) },
-+ { "i2c_grp_a", i2c_pins_a, ARRAY_SIZE(i2c_pins_a) },
-+ { "i2c_grp_b", i2c_pins_b, ARRAY_SIZE(i2c_pins_b) },
-+ { "i2s_grp", i2s_pins, ARRAY_SIZE(i2s_pins) },
-+ { "nand_ctrl_grp", nand_ctrl_pins, ARRAY_SIZE(nand_ctrl_pins) },
-+ { "nand_data_grp", nand_data_pins, ARRAY_SIZE(nand_data_pins) },
-+ { "emmc_ctrl_grp", emmc_ctrl_pins, ARRAY_SIZE(emmc_ctrl_pins) },
-+ { "usb0_pwr_grp", usb0_pwr_pins, ARRAY_SIZE(usb0_pwr_pins) },
-+ { "usb1_pwr_grp", usb1_pwr_pins, ARRAY_SIZE(usb1_pwr_pins) },
-+};
-+
-+/*
-+ * Functions
-+ */
-+
-+struct bcm4908_pinctrl_function {
-+ const char *name;
-+ const char **groups;
-+ const unsigned int num_groups;
-+};
-+
-+static const char *led_0_groups[] = { "led_0_grp_a" };
-+static const char *led_1_groups[] = { "led_1_grp_a" };
-+static const char *led_2_groups[] = { "led_2_grp_a" };
-+static const char *led_3_groups[] = { "led_3_grp_a" };
-+static const char *led_4_groups[] = { "led_4_grp_a" };
-+static const char *led_5_groups[] = { "led_5_grp_a" };
-+static const char *led_6_groups[] = { "led_6_grp_a" };
-+static const char *led_7_groups[] = { "led_7_grp_a" };
-+static const char *led_8_groups[] = { "led_8_grp_a" };
-+static const char *led_9_groups[] = { "led_9_grp_a" };
-+static const char *led_10_groups[] = { "led_10_grp_a", "led_10_grp_b" };
-+static const char *led_11_groups[] = { "led_11_grp_a", "led_11_grp_b" };
-+static const char *led_12_groups[] = { "led_12_grp_a", "led_12_grp_b" };
-+static const char *led_13_groups[] = { "led_13_grp_a", "led_13_grp_b" };
-+static const char *led_14_groups[] = { "led_14_grp_a" };
-+static const char *led_15_groups[] = { "led_15_grp_a" };
-+static const char *led_16_groups[] = { "led_16_grp_a" };
-+static const char *led_17_groups[] = { "led_17_grp_a" };
-+static const char *led_18_groups[] = { "led_18_grp_a" };
-+static const char *led_19_groups[] = { "led_19_grp_a" };
-+static const char *led_20_groups[] = { "led_20_grp_a" };
-+static const char *led_21_groups[] = { "led_21_grp_a" };
-+static const char *led_22_groups[] = { "led_22_grp_a" };
-+static const char *led_23_groups[] = { "led_23_grp_a" };
-+static const char *led_24_groups[] = { "led_24_grp_a" };
-+static const char *led_25_groups[] = { "led_25_grp_a" };
-+static const char *led_26_groups[] = { "led_26_grp_a" };
-+static const char *led_27_groups[] = { "led_27_grp_a" };
-+static const char *led_28_groups[] = { "led_28_grp_a" };
-+static const char *led_29_groups[] = { "led_29_grp_a" };
-+static const char *led_30_groups[] = { "led_30_grp_a" };
-+static const char *led_31_groups[] = { "led_31_grp_a", "led_31_grp_b" };
-+static const char *hs_uart_groups[] = { "hs_uart_grp" };
-+static const char *i2c_groups[] = { "i2c_grp_a", "i2c_grp_b" };
-+static const char *i2s_groups[] = { "i2s_grp" };
-+static const char *nand_ctrl_groups[] = { "nand_ctrl_grp" };
-+static const char *nand_data_groups[] = { "nand_data_grp" };
-+static const char *emmc_ctrl_groups[] = { "emmc_ctrl_grp" };
-+static const char *usb0_pwr_groups[] = { "usb0_pwr_grp" };
-+static const char *usb1_pwr_groups[] = { "usb1_pwr_grp" };
-+
-+static const struct bcm4908_pinctrl_function bcm4908_pinctrl_functions[] = {
-+ { "led_0", led_0_groups, ARRAY_SIZE(led_0_groups) },
-+ { "led_1", led_1_groups, ARRAY_SIZE(led_1_groups) },
-+ { "led_2", led_2_groups, ARRAY_SIZE(led_2_groups) },
-+ { "led_3", led_3_groups, ARRAY_SIZE(led_3_groups) },
-+ { "led_4", led_4_groups, ARRAY_SIZE(led_4_groups) },
-+ { "led_5", led_5_groups, ARRAY_SIZE(led_5_groups) },
-+ { "led_6", led_6_groups, ARRAY_SIZE(led_6_groups) },
-+ { "led_7", led_7_groups, ARRAY_SIZE(led_7_groups) },
-+ { "led_8", led_8_groups, ARRAY_SIZE(led_8_groups) },
-+ { "led_9", led_9_groups, ARRAY_SIZE(led_9_groups) },
-+ { "led_10", led_10_groups, ARRAY_SIZE(led_10_groups) },
-+ { "led_11", led_11_groups, ARRAY_SIZE(led_11_groups) },
-+ { "led_12", led_12_groups, ARRAY_SIZE(led_12_groups) },
-+ { "led_13", led_13_groups, ARRAY_SIZE(led_13_groups) },
-+ { "led_14", led_14_groups, ARRAY_SIZE(led_14_groups) },
-+ { "led_15", led_15_groups, ARRAY_SIZE(led_15_groups) },
-+ { "led_16", led_16_groups, ARRAY_SIZE(led_16_groups) },
-+ { "led_17", led_17_groups, ARRAY_SIZE(led_17_groups) },
-+ { "led_18", led_18_groups, ARRAY_SIZE(led_18_groups) },
-+ { "led_19", led_19_groups, ARRAY_SIZE(led_19_groups) },
-+ { "led_20", led_20_groups, ARRAY_SIZE(led_20_groups) },
-+ { "led_21", led_21_groups, ARRAY_SIZE(led_21_groups) },
-+ { "led_22", led_22_groups, ARRAY_SIZE(led_22_groups) },
-+ { "led_23", led_23_groups, ARRAY_SIZE(led_23_groups) },
-+ { "led_24", led_24_groups, ARRAY_SIZE(led_24_groups) },
-+ { "led_25", led_25_groups, ARRAY_SIZE(led_25_groups) },
-+ { "led_26", led_26_groups, ARRAY_SIZE(led_26_groups) },
-+ { "led_27", led_27_groups, ARRAY_SIZE(led_27_groups) },
-+ { "led_28", led_28_groups, ARRAY_SIZE(led_28_groups) },
-+ { "led_29", led_29_groups, ARRAY_SIZE(led_29_groups) },
-+ { "led_30", led_30_groups, ARRAY_SIZE(led_30_groups) },
-+ { "led_31", led_31_groups, ARRAY_SIZE(led_31_groups) },
-+ { "hs_uart", hs_uart_groups, ARRAY_SIZE(hs_uart_groups) },
-+ { "i2c", i2c_groups, ARRAY_SIZE(i2c_groups) },
-+ { "i2s", i2s_groups, ARRAY_SIZE(i2s_groups) },
-+ { "nand_ctrl", nand_ctrl_groups, ARRAY_SIZE(nand_ctrl_groups) },
-+ { "nand_data", nand_data_groups, ARRAY_SIZE(nand_data_groups) },
-+ { "emmc_ctrl", emmc_ctrl_groups, ARRAY_SIZE(emmc_ctrl_groups) },
-+ { "usb0_pwr", usb0_pwr_groups, ARRAY_SIZE(usb0_pwr_groups) },
-+ { "usb1_pwr", usb1_pwr_groups, ARRAY_SIZE(usb1_pwr_groups) },
-+};
-+
-+/*
-+ * Groups code
-+ */
-+
-+static const struct pinctrl_ops bcm4908_pinctrl_ops = {
-+ .get_groups_count = pinctrl_generic_get_group_count,
-+ .get_group_name = pinctrl_generic_get_group_name,
-+ .get_group_pins = pinctrl_generic_get_group_pins,
-+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
-+ .dt_free_map = pinconf_generic_dt_free_map,
-+};
-+
-+/*
-+ * Functions code
-+ */
-+
-+static int bcm4908_pinctrl_set_mux(struct pinctrl_dev *pctrl_dev,
-+ unsigned int func_selector,
-+ unsigned int group_selector)
-+{
-+ struct bcm4908_pinctrl *bcm4908_pinctrl = pinctrl_dev_get_drvdata(pctrl_dev);
-+ const struct bcm4908_pinctrl_grp *group;
-+ struct group_desc *group_desc;
-+ int i;
-+
-+ group_desc = pinctrl_generic_get_group(pctrl_dev, group_selector);
-+ if (!group_desc)
-+ return -EINVAL;
-+ group = group_desc->data;
-+
-+ mutex_lock(&bcm4908_pinctrl->mutex);
-+ for (i = 0; i < group->num_pins; i++) {
-+ u32 lsb = 0;
-+
-+ lsb |= group->pins[i].number;
-+ lsb |= group->pins[i].function << BCM4908_TEST_PORT_LSB_PINMUX_DATA_SHIFT;
-+
-+ writel(0x0, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_MSB);
-+ writel(lsb, bcm4908_pinctrl->base + BCM4908_TEST_PORT_BLOCK_DATA_LSB);
-+ writel(BCM4908_TEST_PORT_CMD_LOAD_MUX_REG,
-+ bcm4908_pinctrl->base + BCM4908_TEST_PORT_COMMAND);
-+ }
-+ mutex_unlock(&bcm4908_pinctrl->mutex);
-+
-+ return 0;
-+}
-+
-+static const struct pinmux_ops bcm4908_pinctrl_pmxops = {
-+ .get_functions_count = pinmux_generic_get_function_count,
-+ .get_function_name = pinmux_generic_get_function_name,
-+ .get_function_groups = pinmux_generic_get_function_groups,
-+ .set_mux = bcm4908_pinctrl_set_mux,
-+};
-+
-+/*
-+ * Controller code
-+ */
-+
-+static struct pinctrl_desc bcm4908_pinctrl_desc = {
-+ .name = "bcm4908-pinctrl",
-+ .pctlops = &bcm4908_pinctrl_ops,
-+ .pmxops = &bcm4908_pinctrl_pmxops,
-+};
-+
-+static const struct of_device_id bcm4908_pinctrl_of_match_table[] = {
-+ { .compatible = "brcm,bcm4908-pinctrl", },
-+ { }
-+};
-+
-+static int bcm4908_pinctrl_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct bcm4908_pinctrl *bcm4908_pinctrl;
-+ struct pinctrl_desc *pctldesc;
-+ struct pinctrl_pin_desc *pins;
-+ int i;
-+
-+ bcm4908_pinctrl = devm_kzalloc(dev, sizeof(*bcm4908_pinctrl), GFP_KERNEL);
-+ if (!bcm4908_pinctrl)
-+ return -ENOMEM;
-+ pctldesc = &bcm4908_pinctrl->pctldesc;
-+ platform_set_drvdata(pdev, bcm4908_pinctrl);
-+
-+ /* Set basic properties */
-+
-+ bcm4908_pinctrl->dev = dev;
-+
-+ bcm4908_pinctrl->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(bcm4908_pinctrl->base))
-+ return PTR_ERR(bcm4908_pinctrl->base);
-+
-+ mutex_init(&bcm4908_pinctrl->mutex);
-+
-+ memcpy(pctldesc, &bcm4908_pinctrl_desc, sizeof(*pctldesc));
-+
-+ /* Set pinctrl properties */
-+
-+ pins = devm_kcalloc(dev, BCM4908_NUM_PINS, sizeof(*pins), GFP_KERNEL);
-+ if (!pins)
-+ return -ENOMEM;
-+ for (i = 0; i < BCM4908_NUM_PINS; i++) {
-+ pins[i].number = i;
-+ pins[i].name = devm_kasprintf(dev, GFP_KERNEL, "pin-%d", i);
-+ if (!pins[i].name)
-+ return -ENOMEM;
-+ }
-+ pctldesc->pins = pins;
-+ pctldesc->npins = BCM4908_NUM_PINS;
-+
-+ /* Register */
-+
-+ bcm4908_pinctrl->pctldev = devm_pinctrl_register(dev, pctldesc, bcm4908_pinctrl);
-+ if (IS_ERR(bcm4908_pinctrl->pctldev))
-+ return dev_err_probe(dev, PTR_ERR(bcm4908_pinctrl->pctldev),
-+ "Failed to register pinctrl\n");
-+
-+ /* Groups */
-+
-+ for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_grps); i++) {
-+ const struct bcm4908_pinctrl_grp *group = &bcm4908_pinctrl_grps[i];
-+ int *pins;
-+ int j;
-+
-+ pins = devm_kcalloc(dev, group->num_pins, sizeof(*pins), GFP_KERNEL);
-+ if (!pins)
-+ return -ENOMEM;
-+ for (j = 0; j < group->num_pins; j++)
-+ pins[j] = group->pins[j].number;
-+
-+ pinctrl_generic_add_group(bcm4908_pinctrl->pctldev, group->name,
-+ pins, group->num_pins, (void *)group);
-+ }
-+
-+ /* Functions */
-+
-+ for (i = 0; i < ARRAY_SIZE(bcm4908_pinctrl_functions); i++) {
-+ const struct bcm4908_pinctrl_function *function = &bcm4908_pinctrl_functions[i];
-+
-+ pinmux_generic_add_function(bcm4908_pinctrl->pctldev,
-+ function->name,
-+ function->groups,
-+ function->num_groups, NULL);
-+ }
-+
-+ return 0;
-+}
-+
-+static struct platform_driver bcm4908_pinctrl_driver = {
-+ .probe = bcm4908_pinctrl_probe,
-+ .driver = {
-+ .name = "bcm4908-pinctrl",
-+ .of_match_table = bcm4908_pinctrl_of_match_table,
-+ },
-+};
-+
-+module_platform_driver(bcm4908_pinctrl_driver);
-+
-+MODULE_AUTHOR("Rafał Miłecki");
-+MODULE_LICENSE("GPL v2");
-+MODULE_DEVICE_TABLE(of, bcm4908_pinctrl_of_match_table);
+++ /dev/null
-From d0aee048d648ec2d9aa7af43b127ebf847d497d5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Fri, 11 Feb 2022 11:58:06 +0100
-Subject: [PATCH] i2c: brcmstb: allow compiling on BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 SoCs use the same I2C hardware block as STB and BCM63xx devices.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Wolfram Sang <wsa@kernel.org>
----
- drivers/i2c/busses/Kconfig | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -477,8 +477,8 @@ config I2C_BCM_KONA
-
- config I2C_BRCMSTB
- tristate "BRCM Settop/DSL I2C controller"
-- depends on ARCH_BCM2835 || ARCH_BRCMSTB || BMIPS_GENERIC || \
-- ARCH_BCM_63XX || COMPILE_TEST
-+ depends on ARCH_BCM2835 || ARCH_BCM4908 || ARCH_BCM_63XX || \
-+ ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
- default y
- help
- If you say yes to this option, support will be included for the
+++ /dev/null
-From cd91fb2776967b2b2dea27307a3f23ba3d9bbb32 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 9 Feb 2022 21:32:02 +0100
-Subject: [PATCH] watchdog: allow building BCM7038_WDT for BCM4908
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx
-including the watchdog block. Allow building this driver for it.
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
----
- drivers/watchdog/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -1756,7 +1756,7 @@ config BCM7038_WDT
- tristate "BCM7038 Watchdog"
- select WATCHDOG_CORE
- depends on HAS_IOMEM
-- depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
-+ depends on ARCH_BCM4908 || ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
- help
- Watchdog driver for the built-in hardware in Broadcom 7038 and
- later SoCs used in set-top boxes. BCM7038 was made public
+++ /dev/null
-From 2dd441f16d6ad6104d85c4e5dfeb6dde4df26869 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Wed, 16 Feb 2022 07:34:08 +0100
-Subject: [PATCH] watchdog: bcm7038_wdt: Support BCM6345 compatible string
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-A new "compatible" value has been added in the commit 17fffe91ba36
-("dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding").
-It's meant to be used for BCM63xx SoCs family but hardware block can be
-programmed just like the 7038 one.
-
-Cc: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Reviewed-by: Guenter Roeck <linux@roeck-us.net>
-Link: https://lore.kernel.org/r/20220216063408.23168-1-zajec5@gmail.com
-Signed-off-by: Guenter Roeck <linux@roeck-us.net>
-Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
----
- drivers/watchdog/bcm7038_wdt.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/watchdog/bcm7038_wdt.c
-+++ b/drivers/watchdog/bcm7038_wdt.c
-@@ -212,6 +212,7 @@ static SIMPLE_DEV_PM_OPS(bcm7038_wdt_pm_
- bcm7038_wdt_resume);
-
- static const struct of_device_id bcm7038_wdt_match[] = {
-+ { .compatible = "brcm,bcm6345-wdt" },
- { .compatible = "brcm,bcm7038-wdt" },
- {},
- };
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 28 Mar 2024 10:24:34 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: set
- brcm,wp-not-connected
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Every described BCM4908 board has WP pin not connected. This caused
-problems for drivers since day 0 but there was no property to describe
-that properly. Projects like OpenWrt were modifying Linux driver to deal
-with it.
-
-It's not clear if that is hardware limitation or just reference design
-being copied over and over but this applies to all known / supported
-BCM4908 boards. Handle it by marking WP as not connected by default.
-
-Fixes: 2961f69f151c ("arm64: dts: broadcom: add BCM4908 and Asus GT-AC5300 early DTS files")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -593,6 +593,7 @@
- reg-names = "nand", "nand-int-base";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "nand_ctlrdy";
-+ brcm,wp-not-connected;
- status = "okay";
-
- nandcs: nand@0 {
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 22:01:03 +0100
-Subject: [PATCH] arm64: dts: broadcom: bcmbca: bcm4908: limit amount of GPIOs
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Linux driver can't handle more than 64 GPIOs
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
-
---- a/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-+++ b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
-@@ -340,7 +340,7 @@
- gpio0: gpio-controller@500 {
- compatible = "brcm,bcm6345-gpio";
- reg-names = "dirout", "dat";
-- reg = <0x500 0x28>, <0x528 0x28>;
-+ reg = <0x500 0x8>, <0x528 0x8>;
-
- #gpio-cells = <2>;
- gpio-controller;
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 12 Aug 2021 11:52:42 +0200
-Subject: [PATCH] arm64: don't issue HVC on boot
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Broadcom's CFE loader seems to miss setting SCR_EL3.HCE which results in
-generating an UNDEF and kernel panic on the first HVC.
-
-HVC gets issued by kernels 5.12+ while booting, by kexec and KVM. Until
-someone finds a workaround we have to avoid all above.
-
-Workarounds: 0c93df9622d4 ("arm64: Initialise as nVHE before switching to VHE")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- arch/arm64/kernel/hyp-stub.S | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/kernel/hyp-stub.S
-+++ b/arch/arm64/kernel/hyp-stub.S
-@@ -238,7 +238,7 @@ SYM_FUNC_START(switch_to_vhe)
-
- // Turn the world upside down
- mov x0, #HVC_VHE_RESTART
-- hvc #0
-+// hvc #0
- 1:
- ret
- SYM_FUNC_END(switch_to_vhe)
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Mon, 15 Feb 2021 23:59:26 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: enable GPHY for switch probing
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-GPHY needs to be enabled to succesfully probe & setup switch port
-connected to it. Otherwise hardcoding PHY OUI would be required.
-
-Before:
-brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch wan (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 7
-
-After:
-brcm-sf2 80080000.switch lan4 (uninitialized): PHY [800c05c0.mdio--1:08] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan3 (uninitialized): PHY [800c05c0.mdio--1:09] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan2 (uninitialized): PHY [800c05c0.mdio--1:0a] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch lan1 (uninitialized): PHY [800c05c0.mdio--1:0b] driver [Generic PHY] (irq=POLL)
-brcm-sf2 80080000.switch wan (uninitialized): PHY [800c05c0.mdio--1:0c] driver [Generic PHY] (irq=POLL)
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/dsa/bcm_sf2.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1548,10 +1548,14 @@ static int bcm_sf2_sw_probe(struct platf
- rev = reg_readl(priv, REG_PHY_REVISION);
- priv->hw_params.gphy_rev = rev & PHY_REVISION_MASK;
-
-+ bcm_sf2_gphy_enable_set(priv->dev->ds, true);
-+
- ret = b53_switch_register(dev);
- if (ret)
- goto out_mdio;
-
-+ bcm_sf2_gphy_enable_set(priv->dev->ds, false);
-+
- dev_info(&pdev->dev,
- "Starfighter 2 top: %x.%02x, core: %x.%02x, IRQs: %d, %d\n",
- priv->hw_params.top_rev >> 8, priv->hw_params.top_rev & 0xff,
+++ /dev/null
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Tue, 16 Feb 2021 00:06:35 +0100
-Subject: [PATCH] net: dsa: bcm_sf2: keep GPHY enabled on the BCM4908
-
-Trying to access disabled PHY results in MDIO_READ_FAIL and:
-[ 11.962886] brcm-sf2 80080000.switch wan: configuring for phy/internal link mode
-[ 11.972500] 8021q: adding VLAN 0 to HW filter on device wan
-[ 11.980205] ------------[ cut here ]------------
-[ 11.984885] WARNING: CPU: 0 PID: 7 at phy_error+0x10/0x58
-
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
----
- drivers/net/dsa/bcm_sf2.c | 6 ++++++
- 1 file changed, 6 insertions(+)
-
---- a/drivers/net/dsa/bcm_sf2.c
-+++ b/drivers/net/dsa/bcm_sf2.c
-@@ -1562,6 +1562,12 @@ static int bcm_sf2_sw_probe(struct platf
- priv->hw_params.core_rev >> 8, priv->hw_params.core_rev & 0xff,
- priv->irq0, priv->irq1);
-
-+ /* BCM4908 has 5 GPHYs which means bcm_sf2_port_setup() will not enable
-+ * GPHY when needed. Leave it enabled here.
-+ */
-+ if (priv->type == BCM4908_DEVICE_ID)
-+ bcm_sf2_gphy_enable_set(priv->dev->ds, true);
-+
- return 0;
-
- out_mdio:
projects / openwrt / openwrt.git / commitdiff