This is an automatically generated commit.
When doing `git bisect`, consider `git bisect --skip`.
Signed-off-by: Antonio Flores <antflores627@gmail.com>
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
-CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=33
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARCH_WANTS_THP_SWAP=y
-CONFIG_ARC_EMAC_CORE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_EPAN=y
-CONFIG_ARM64_ERRATUM_2051678=y
-CONFIG_ARM64_ERRATUM_2054223=y
-CONFIG_ARM64_ERRATUM_2067961=y
-CONFIG_ARM64_ERRATUM_2077057=y
-CONFIG_ARM64_ERRATUM_2658417=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_ERRATUM_858921=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_PTR_AUTH_KERNEL=y
-CONFIG_ARM64_RAS_EXTN=y
-CONFIG_ARM64_SME=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=48
-# CONFIG_ARM64_VA_BITS_39 is not set
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_MHU=y
-CONFIG_ARM_MHU_V2=y
-CONFIG_ARM_PSCI_CPUIDLE=y
-CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
-CONFIG_ARM_SCMI_CPUFREQ=y
-CONFIG_ARM_SCMI_HAVE_SHMEM=y
-CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
-CONFIG_ARM_SCMI_POWER_CONTROL=y
-CONFIG_ARM_SCMI_POWER_DOMAIN=y
-CONFIG_ARM_SCMI_PROTOCOL=y
-CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
-CONFIG_ARM_SCMI_TRANSPORT_SMC=y
-CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_ARM_SCPI_POWER_DOMAIN=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
-# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
-CONFIG_ARM_SMMU_V3=y
-# CONFIG_ARM_SMMU_V3_SVA is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_BLK_DEV_BSG=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_BSG_COMMON=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_BLK_DEV_INTEGRITY_T10=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BRCMSTB_GISB_ARB=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
-CONFIG_CC_NO_ARRAY_BOUNDS=y
-CONFIG_CHARGER_GPIO=y
-# CONFIG_CHARGER_RK817 is not set
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_PX30=y
-CONFIG_CLK_RK3308=y
-CONFIG_CLK_RK3328=y
-CONFIG_CLK_RK3368=y
-CONFIG_CLK_RK3399=y
-CONFIG_CLK_RK3568=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=16
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-# CONFIG_CMA_SYSFS is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_RK808=y
-CONFIG_COMMON_CLK_ROCKCHIP=y
-CONFIG_COMMON_CLK_SCMI=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTEXT_TRACKING=y
-CONFIG_CONTEXT_TRACKING_IDLE=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
-CONFIG_CPU_ISOLATION=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRASH_DUMP=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRC64=y
-CONFIG_CRC64_ROCKSOFT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC64_ROCKSOFT=y
-CONFIG_CRYPTO_CRCT10DIF=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_SHA1=y
-CONFIG_CRYPTO_LIB_UTILS=y
-CONFIG_CRYPTO_POLYVAL=y
-CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SM3=y
-CONFIG_CRYPTO_SM3_NEON=y
-CONFIG_CRYPTO_SM4=y
-CONFIG_CRYPTO_SM4_ARM64_CE_BLK=y
-CONFIG_CRYPTO_SM4_ARM64_NEON_BLK=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEVFREQ_GOV_PASSIVE is not set
-CONFIG_DEVFREQ_GOV_PERFORMANCE=y
-CONFIG_DEVFREQ_GOV_POWERSAVE=y
-CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
-CONFIG_DEVFREQ_GOV_USERSPACE=y
-# CONFIG_DEVFREQ_THERMAL is not set
-CONFIG_DEVMEM=y
-# CONFIG_DEVPORT is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OPS=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_GENPD=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_DWMAC_DWC_QOS_ETH=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_ROCKCHIP=y
-CONFIG_DW_WATCHDOG=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EMAC_ROCKCHIP=y
-CONFIG_ENERGY_MODEL=y
-CONFIG_EXCLUSIVE_SYSTEM_RAM=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FHANDLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FORTIFY_SOURCE is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FWNODE_MDIO=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_FW_LOADER_SYSFS=y
-CONFIG_GCC11_NO_ARRAY_BOUNDS=y
-CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IOREMAP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_CDEV=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_ROCKCHIP=y
-CONFIG_GPIO_SYSCON=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI=y
-# CONFIG_HOTPLUG_PCI_CPCI is not set
-# CONFIG_HOTPLUG_PCI_PCIE is not set
-# CONFIG_HOTPLUG_PCI_SHPC is not set
-CONFIG_HUGETLBFS=y
-CONFIG_HUGETLB_PAGE=y
-CONFIG_HWMON=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_ROCKCHIP=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_COMPAT=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_RK3X=y
-CONFIG_IIO=y
-# CONFIG_IIO_SCMI is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INDIRECT_PIO=y
-CONFIG_INPUT=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_LEDS=y
-CONFIG_INPUT_MATRIXKMAP=y
-CONFIG_INPUT_RK805_PWRKEY=y
-CONFIG_IOMMU_API=y
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
-# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
-CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
-CONFIG_IOMMU_DMA=y
-CONFIG_IOMMU_IOVA=y
-CONFIG_IOMMU_IO_PGTABLE=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_DART is not set
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_IO_STRICT_DEVMEM is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_MSI_IOMMU=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JUMP_LABEL=y
-CONFIG_KALLSYMS=y
-CONFIG_KCMP=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEXEC_FILE=y
-CONFIG_KSM=y
-# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_PANIC=y
-CONFIG_LIBCRC32C=y
-CONFIG_LIBFDT=y
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAGIC_SYSRQ_SERIAL=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_BUS_MUX=y
-CONFIG_MDIO_BUS_MUX_GPIO=y
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_DEVRES=y
-CONFIG_MEDIATEK_GE_PHY=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_KHADAS_MCU is not set
-CONFIG_MFD_RK808=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_CQHCI=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-# CONFIG_MMC_DW_PCI is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-CONFIG_MMC_SDHCI_OF_DWCMSHC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MOTORCOMM_PHY=y
-CONFIG_MQ_IOSCHED_DEADLINE=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MT7530=y
-CONFIG_NET_DSA_MT7530_MDIO=y
-CONFIG_NET_DSA_MT7530_MMIO=y
-CONFIG_NET_DSA_TAG_MTK=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SELFTESTS=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=256
-CONFIG_NVMEM=y
-CONFIG_NVMEM_ROCKCHIP_EFUSE=y
-# CONFIG_NVMEM_ROCKCHIP_OTP is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_HWMON is not set
-# CONFIG_NVME_MULTIPATH is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESOLVE=y
-# CONFIG_OVERLAY_FS_XINO_AUTO is not set
-CONFIG_PADATA=y
-CONFIG_PAGE_POOL=y
-CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
-CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
-# CONFIG_PANIC_ON_OOPS is not set
-CONFIG_PANIC_ON_OOPS_VALUE=0
-CONFIG_PANIC_TIMEOUT=0
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-CONFIG_PCIE_PME=y
-CONFIG_PCIE_ROCKCHIP=y
-CONFIG_PCIE_ROCKCHIP_DW_HOST=y
-CONFIG_PCIE_ROCKCHIP_HOST=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_STUB=y
-CONFIG_PCS_MTK_LYNXI=y
-CONFIG_PCS_XPCS=y
-CONFIG_PGTABLE_LEVELS=4
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_ROCKCHIP_DP=y
-# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
-CONFIG_PHY_ROCKCHIP_EMMC=y
-# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
-CONFIG_PHY_ROCKCHIP_PCIE=y
-CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
-CONFIG_PHY_ROCKCHIP_TYPEC=y
-CONFIG_PHY_ROCKCHIP_USB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_RK805=y
-CONFIG_PINCTRL_ROCKCHIP=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PL330_DMA=y
-CONFIG_PLATFORM_MHU=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_DEVFREQ=y
-# CONFIG_PM_DEVFREQ_EVENT is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_OPP=y
-CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_SUPPLY_HWMON=y
-CONFIG_PPS=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPTION=y
-CONFIG_PREEMPT_BUILD=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_PROC_VMCORE=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_PWM=y
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_SYSFS=y
-# CONFIG_QFMT_V2 is not set
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_QUOTA=y
-CONFIG_QUOTACTL=y
-CONFIG_RAID_ATTRS=y
-CONFIG_RANDOMIZE_BASE=y
-CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
-CONFIG_RANDSTRUCT_NONE=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RCU_TRACE=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_ARM_SCMI=y
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_REGULATOR_RK808=y
-CONFIG_RELOCATABLE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SCMI=y
-CONFIG_RFS_ACCEL=y
-CONFIG_ROCKCHIP_GRF=y
-CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_ROCKCHIP_MBOX=y
-CONFIG_ROCKCHIP_PHY=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-# CONFIG_ROCKCHIP_SARADC is not set
-CONFIG_ROCKCHIP_THERMAL=y
-CONFIG_ROCKCHIP_TIMER=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RSEQ=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_HYM8563=y
-CONFIG_RTC_DRV_RK808=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_NVMEM=y
-# CONFIG_RUNTIME_TESTING_MENU is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCHED_MC=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SCSI_SAS_ATTRS=y
-CONFIG_SCSI_SAS_HOST_SMP=y
-CONFIG_SCSI_SAS_LIBSAS=y
-# CONFIG_SECURITY_DMESG_RESTRICT is not set
-CONFIG_SENSORS_ARM_SCMI=y
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_DWLIB=y
-CONFIG_SERIAL_8250_EXAR=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIO=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SOFTIRQ_ON_OWN_STACK=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_DYNAMIC=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_ROCKCHIP=y
-CONFIG_SPI_ROCKCHIP_SFC=y
-CONFIG_SPI_SPIDEV=y
-# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
-CONFIG_SQUASHFS_DECOMP_SINGLE=y
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FILE_CACHE=y
-# CONFIG_SQUASHFS_FILE_DIRECT is not set
-CONFIG_SRAM=y
-CONFIG_SRCU=y
-CONFIG_STACKPROTECTOR=y
-CONFIG_STACKPROTECTOR_PER_TASK=y
-CONFIG_STACKPROTECTOR_STRONG=y
-CONFIG_STACKTRACE=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_STRICT_DEVMEM=y
-# CONFIG_STRIP_ASM_SYMS is not set
-# CONFIG_SWAP is not set
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFS_SYSCALL=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_EMULATION=y
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TRACE_CLOCK=y
-CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
-# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
-CONFIG_TRANS_TABLE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_TYPEC=y
-# CONFIG_TYPEC_ANX7411 is not set
-CONFIG_TYPEC_FUSB302=y
-# CONFIG_TYPEC_HD3SS3220 is not set
-# CONFIG_TYPEC_MUX_FSA4480 is not set
-# CONFIG_TYPEC_MUX_PI3USB30532 is not set
-# CONFIG_TYPEC_RT1719 is not set
-# CONFIG_TYPEC_STUSB160X is not set
-# CONFIG_TYPEC_TCPCI is not set
-CONFIG_TYPEC_TCPM=y
-# CONFIG_TYPEC_TPS6598X is not set
-# CONFIG_TYPEC_WUSB3801 is not set
-# CONFIG_UACCE is not set
-# CONFIG_UCLAMP_TASK is not set
-# CONFIG_UEVENT_HELPER is not set
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_HOST=y
-CONFIG_USB_DWC3_OF_SIMPLE=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-CONFIG_USB_HID=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_PHY=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_ULPI_BUS=y
-CONFIG_USB_ULPI_VIEWPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PLATFORM=y
-# CONFIG_VIRTIO_MENU is not set
-CONFIG_VMAP_STACK=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XARRAY_MULTI=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA32=y
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
+CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=33
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARCH_WANTS_THP_SWAP=y
+CONFIG_ARC_EMAC_CORE=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_CNP=y
+CONFIG_ARM64_EPAN=y
+CONFIG_ARM64_ERRATUM_2051678=y
+CONFIG_ARM64_ERRATUM_2054223=y
+CONFIG_ARM64_ERRATUM_2067961=y
+CONFIG_ARM64_ERRATUM_2077057=y
+CONFIG_ARM64_ERRATUM_2658417=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_ERRATUM_858921=y
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_PTR_AUTH=y
+CONFIG_ARM64_PTR_AUTH_KERNEL=y
+CONFIG_ARM64_RAS_EXTN=y
+CONFIG_ARM64_SME=y
+CONFIG_ARM64_SVE=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=48
+# CONFIG_ARM64_VA_BITS_39 is not set
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
+CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_MHU=y
+CONFIG_ARM_MHU_V2=y
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_RK3399_DMC_DEVFREQ is not set
+CONFIG_ARM_SCMI_CPUFREQ=y
+CONFIG_ARM_SCMI_HAVE_SHMEM=y
+CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
+CONFIG_ARM_SCMI_POWER_CONTROL=y
+CONFIG_ARM_SCMI_POWER_DOMAIN=y
+CONFIG_ARM_SCMI_PROTOCOL=y
+CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
+CONFIG_ARM_SCMI_TRANSPORT_SMC=y
+CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE=y
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ARM_SCPI_POWER_DOMAIN=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT=y
+# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
+CONFIG_ARM_SMMU_V3=y
+# CONFIG_ARM_SMMU_V3_SVA is not set
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GPIO=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_BSG_COMMON=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_BLK_DEV_INTEGRITY_T10=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_BLK_DEV_PCIESSD_MTIP32XX=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_PM=y
+CONFIG_BRCMSTB_GISB_ARB=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
+CONFIG_CC_NO_ARRAY_BOUNDS=y
+CONFIG_CHARGER_GPIO=y
+# CONFIG_CHARGER_RK817 is not set
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLK_PX30=y
+CONFIG_CLK_RK3308=y
+CONFIG_CLK_RK3328=y
+CONFIG_CLK_RK3368=y
+CONFIG_CLK_RK3399=y
+CONFIG_CLK_RK3568=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+# CONFIG_CMA_SYSFS is not set
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_RK808=y
+CONFIG_COMMON_CLK_ROCKCHIP=y
+CONFIG_COMMON_CLK_SCMI=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CONTEXT_TRACKING=y
+CONFIG_CONTEXT_TRACKING_IDLE=y
+CONFIG_CONTIG_ALLOC=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
+CONFIG_CPU_ISOLATION=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CRASH_CORE=y
+CONFIG_CRASH_DUMP=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRC64=y
+CONFIG_CRC64_ROCKSOFT=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CROSS_MEMORY_ATTACH=y
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC64_ROCKSOFT=y
+CONFIG_CRYPTO_CRCT10DIF=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_SHA1=y
+CONFIG_CRYPTO_LIB_UTILS=y
+CONFIG_CRYPTO_POLYVAL=y
+CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SM3=y
+CONFIG_CRYPTO_SM3_NEON=y
+CONFIG_CRYPTO_SM4=y
+CONFIG_CRYPTO_SM4_ARM64_CE_BLK=y
+CONFIG_CRYPTO_SM4_ARM64_NEON_BLK=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEVFREQ_GOV_PASSIVE is not set
+CONFIG_DEVFREQ_GOV_PERFORMANCE=y
+CONFIG_DEVFREQ_GOV_POWERSAVE=y
+CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+# CONFIG_DEVFREQ_THERMAL is not set
+CONFIG_DEVMEM=y
+# CONFIG_DEVPORT is not set
+CONFIG_DMADEVICES=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+CONFIG_DT_IDLE_GENPD=y
+CONFIG_DT_IDLE_STATES=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_DWMAC_GENERIC=y
+CONFIG_DWMAC_ROCKCHIP=y
+CONFIG_DW_WATCHDOG=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EMAC_ROCKCHIP=y
+CONFIG_ENERGY_MODEL=y
+CONFIG_EXCLUSIVE_SYSTEM_RAM=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXTCON=y
+CONFIG_F2FS_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_FHANDLE=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FORTIFY_SOURCE is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_FW_LOADER_SYSFS=y
+CONFIG_GCC11_NO_ARRAY_BOUNDS=y
+CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IOREMAP=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_ROCKCHIP=y
+CONFIG_GPIO_SYSCON=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HID=y
+CONFIG_HID_GENERIC=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_HWMON=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ROCKCHIP=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_I2C_RK3X=y
+CONFIG_IIO=y
+# CONFIG_IIO_SCMI is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_INDIRECT_PIO=y
+CONFIG_INPUT=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_LEDS=y
+CONFIG_INPUT_MATRIXKMAP=y
+CONFIG_INPUT_RK805_PWRKEY=y
+CONFIG_IOMMU_API=y
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
+CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
+CONFIG_IOMMU_DMA=y
+CONFIG_IOMMU_IOVA=y
+CONFIG_IOMMU_IO_PGTABLE=y
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_DART is not set
+CONFIG_IOMMU_IO_PGTABLE_LPAE=y
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_IO_STRICT_DEVMEM is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_MSI_IOMMU=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JUMP_LABEL=y
+CONFIG_KALLSYMS=y
+CONFIG_KCMP=y
+CONFIG_KEXEC_CORE=y
+CONFIG_KEXEC_FILE=y
+CONFIG_KSM=y
+# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_PANIC=y
+CONFIG_LIBCRC32C=y
+CONFIG_LIBFDT=y
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAGIC_SYSRQ_SERIAL=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_BUS_MUX=y
+CONFIG_MDIO_BUS_MUX_GPIO=y
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MEDIATEK_GE_PHY=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_KHADAS_MCU is not set
+CONFIG_MFD_RK808=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_CQHCI=y
+CONFIG_MMC_DW=y
+# CONFIG_MMC_DW_BLUEFIELD is not set
+# CONFIG_MMC_DW_EXYNOS is not set
+# CONFIG_MMC_DW_HI3798CV200 is not set
+# CONFIG_MMC_DW_K3 is not set
+# CONFIG_MMC_DW_PCI is not set
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_DWCMSHC=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MOTORCOMM_PHY=y
+CONFIG_MQ_IOSCHED_DEADLINE=y
+# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_MT7530=y
+CONFIG_NET_DSA_MT7530_MDIO=y
+CONFIG_NET_DSA_MT7530_MMIO=y
+CONFIG_NET_DSA_TAG_MTK=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=256
+CONFIG_NVMEM=y
+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
+# CONFIG_NVMEM_ROCKCHIP_OTP is not set
+CONFIG_NVMEM_SYSFS=y
+CONFIG_NVME_CORE=y
+# CONFIG_NVME_HWMON is not set
+# CONFIG_NVME_MULTIPATH is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IOMMU=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESOLVE=y
+# CONFIG_OVERLAY_FS_XINO_AUTO is not set
+CONFIG_PADATA=y
+CONFIG_PAGE_POOL=y
+CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
+CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
+# CONFIG_PANIC_ON_OOPS is not set
+CONFIG_PANIC_ON_OOPS_VALUE=0
+CONFIG_PANIC_TIMEOUT=0
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM=y
+CONFIG_PCIEASPM_DEFAULT=y
+# CONFIG_PCIEASPM_PERFORMANCE is not set
+# CONFIG_PCIEASPM_POWERSAVE is not set
+# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_DW_HOST=y
+CONFIG_PCIE_PME=y
+CONFIG_PCIE_ROCKCHIP=y
+CONFIG_PCIE_ROCKCHIP_DW_HOST=y
+CONFIG_PCIE_ROCKCHIP_HOST=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PCI_STUB=y
+CONFIG_PCS_MTK_LYNXI=y
+CONFIG_PCS_XPCS=y
+CONFIG_PGTABLE_LEVELS=4
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PHY_ROCKCHIP_DP=y
+# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
+CONFIG_PHY_ROCKCHIP_EMMC=y
+# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
+CONFIG_PHY_ROCKCHIP_PCIE=y
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+CONFIG_PHY_ROCKCHIP_USB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_RK805=y
+CONFIG_PINCTRL_ROCKCHIP=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PL330_DMA=y
+CONFIG_PLATFORM_MHU=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PM_DEVFREQ=y
+# CONFIG_PM_DEVFREQ_EVENT is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_OPP=y
+CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_HWMON=y
+CONFIG_PPS=y
+CONFIG_PREEMPT=y
+CONFIG_PREEMPTION=y
+CONFIG_PREEMPT_BUILD=y
+CONFIG_PREEMPT_COUNT=y
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_RCU=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PROC_VMCORE=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_PWM=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_QUOTA=y
+CONFIG_QUOTACTL=y
+CONFIG_RAID_ATTRS=y
+CONFIG_RANDOMIZE_BASE=y
+CONFIG_RANDOMIZE_MODULE_REGION_FULL=y
+CONFIG_RANDSTRUCT_NONE=y
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+# CONFIG_RAVE_SP_CORE is not set
+CONFIG_RCU_TRACE=y
+CONFIG_REALTEK_PHY=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_IRQ=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_ARM_SCMI=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_RELOCATABLE=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RESET_SCMI=y
+CONFIG_RFS_ACCEL=y
+CONFIG_ROCKCHIP_GRF=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_ROCKCHIP_MBOX=y
+CONFIG_ROCKCHIP_PHY=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+# CONFIG_ROCKCHIP_SARADC is not set
+CONFIG_ROCKCHIP_THERMAL=y
+CONFIG_ROCKCHIP_TIMER=y
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+CONFIG_RPS=y
+CONFIG_RSEQ=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_HYM8563=y
+CONFIG_RTC_DRV_RK808=y
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_NVMEM=y
+# CONFIG_RUNTIME_TESTING_MENU is not set
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SCHED_MC=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SCSI_SAS_ATTRS=y
+CONFIG_SCSI_SAS_HOST_SMP=y
+CONFIG_SCSI_SAS_LIBSAS=y
+# CONFIG_SECURITY_DMESG_RESTRICT is not set
+CONFIG_SENSORS_ARM_SCMI=y
+CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_DWLIB=y
+CONFIG_SERIAL_8250_EXAR=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIO=y
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SOFTIRQ_ON_OWN_STACK=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_DYNAMIC=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_ROCKCHIP_SFC=y
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
+CONFIG_SQUASHFS_DECOMP_SINGLE=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FILE_CACHE=y
+# CONFIG_SQUASHFS_FILE_DIRECT is not set
+CONFIG_SRAM=y
+CONFIG_SRCU=y
+CONFIG_STACKPROTECTOR=y
+CONFIG_STACKPROTECTOR_PER_TASK=y
+CONFIG_STACKPROTECTOR_STRONG=y
+CONFIG_STACKTRACE=y
+CONFIG_STMMAC_ETH=y
+CONFIG_STMMAC_PLATFORM=y
+CONFIG_STRICT_DEVMEM=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_SWAP is not set
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYSFS_SYSCALL=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_EMULATION=y
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TRACE_CLOCK=y
+CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
+# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
+CONFIG_TRANS_TABLE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_TYPEC=y
+# CONFIG_TYPEC_ANX7411 is not set
+CONFIG_TYPEC_FUSB302=y
+# CONFIG_TYPEC_HD3SS3220 is not set
+# CONFIG_TYPEC_MUX_FSA4480 is not set
+# CONFIG_TYPEC_MUX_PI3USB30532 is not set
+# CONFIG_TYPEC_RT1719 is not set
+# CONFIG_TYPEC_STUSB160X is not set
+# CONFIG_TYPEC_TCPCI is not set
+CONFIG_TYPEC_TCPM=y
+# CONFIG_TYPEC_TPS6598X is not set
+# CONFIG_TYPEC_WUSB3801 is not set
+# CONFIG_UACCE is not set
+# CONFIG_UCLAMP_TASK is not set
+# CONFIG_UEVENT_HELPER is not set
+CONFIG_UNINLINE_SPIN_UNLOCK=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_HOST=y
+CONFIG_USB_DWC3_OF_SIMPLE=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_HID=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_PHY=y
+CONFIG_USB_ROLE_SWITCH=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_ULPI_BUS=y
+CONFIG_USB_ULPI_VIEWPORT=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+# CONFIG_VIRTIO_MENU is not set
+CONFIG_VMAP_STACK=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XARRAY_MULTI=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA32=y
+++ /dev/null
-From b75a52b0dda353aeefb4830a320589a363f49579 Mon Sep 17 00:00:00 2001
-From: Shawn Lin <shawn.lin@rock-chips.com>
-Date: Thu, 2 Feb 2023 08:35:16 +0800
-Subject: [PATCH] mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for
- rockchip platform
-
-For Rockchip platform, DLL bypass bit and start bit need to be set if
-DLL is not locked. And adjust pre-change delay to 0x3 for better signal
-test result.
-
-Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
-Link: https://lore.kernel.org/r/1675298118-64243-2-git-send-email-shawn.lin@rock-chips.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
---- a/drivers/mmc/host/sdhci-of-dwcmshc.c
-+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
-@@ -48,6 +48,7 @@
- #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL 29
- #define DWCMSHC_EMMC_DLL_START_POINT 16
- #define DWCMSHC_EMMC_DLL_INC 8
-+#define DWCMSHC_EMMC_DLL_BYPASS BIT(24)
- #define DWCMSHC_EMMC_DLL_DLYENA BIT(27)
- #define DLL_TXCLK_TAPNUM_DEFAULT 0x10
- #define DLL_TXCLK_TAPNUM_90_DEGREES 0xA
-@@ -60,6 +61,7 @@
- #define DLL_RXCLK_NO_INVERTER 1
- #define DLL_RXCLK_INVERTER 0
- #define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8
-+#define DLL_RXCLK_ORI_GATE BIT(31)
- #define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24)
- #define DLL_CMDOUT_SRC_CLK_NEG BIT(28)
- #define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29)
-@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(str
- sdhci_writel(host, extra, reg);
-
- if (clock <= 52000000) {
-- /* Disable DLL and reset both of sample and drive clock */
-- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
-- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
-+ /*
-+ * Disable DLL and reset both of sample and drive clock.
-+ * The bypass bit and start bit need to be set if DLL is not locked.
-+ */
-+ sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
-+ sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
- sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
- /*
-@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(str
- }
-
- extra = 0x1 << 16 | /* tune clock stop en */
-- 0x2 << 17 | /* pre-change delay */
-+ 0x3 << 17 | /* pre-change delay */
- 0x3 << 19; /* post-change delay */
- sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
-
+++ /dev/null
-From 49502408007b77ff290ce62e6218cefaeedcb31a Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul@gmail.com>
-Date: Thu, 9 Mar 2023 17:03:49 -0800
-Subject: [PATCH] mmc: sdhci-of-dwcmshc: properly determine max clock on
- Rockchip
-
-Currently .get_max_clock returns the current clock rate for cclk_emmc
-on rk35xx, thus max clock gets set to whatever bootloader set it to.
-
-In case of u-boot, it is intentionally reset to 50 MHz if it boots
-from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
-HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
-clears appropriate caps if host->mmc->f_max is < 52MHz
-
-cclk_emmc is not a fixed clock on rk35xx, so using
-sdhci_pltfm_clk_get_max_clock is not appropriate here.
-
-Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
-Acked-by: Adrian Hunter <adrian.hunter@intel.com>
-Link: https://lore.kernel.org/r/20230310010349.509132-1-anarsoul@gmail.com
-Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
----
- drivers/mmc/host/sdhci-of-dwcmshc.c | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/drivers/mmc/host/sdhci-of-dwcmshc.c
-+++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
-@@ -126,6 +126,13 @@ static unsigned int dwcmshc_get_max_cloc
- return pltfm_host->clock;
- }
-
-+static unsigned int rk35xx_get_max_clock(struct sdhci_host *host)
-+{
-+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
-+
-+ return clk_round_rate(pltfm_host->clk, ULONG_MAX);
-+}
-+
- static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
- struct mmc_request *mrq)
- {
-@@ -343,7 +350,7 @@ static const struct sdhci_ops sdhci_dwcm
- .set_clock = dwcmshc_rk3568_set_clock,
- .set_bus_width = sdhci_set_bus_width,
- .set_uhs_signaling = dwcmshc_set_uhs_signaling,
-- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
-+ .get_max_clock = rk35xx_get_max_clock,
- .reset = rk35xx_sdhci_reset,
- .adma_write_desc = dwcmshc_adma_write_desc,
- };
+++ /dev/null
-From 004589ff9df5b75672a78b6c3c4cba93202b14c9 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 25 Mar 2023 15:40:20 +0800
-Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
-
-The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
-chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230325074022.9818-3-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3328-nanopi-r2c.dts | 40 +++++++++++++++++++
- 2 files changed, 41 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a9
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
-@@ -0,0 +1,40 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
-+ * (http://www.friendlyarm.com)
-+ *
-+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include "rk3328-nanopi-r2s.dts"
-+
-+/ {
-+ model = "FriendlyElec NanoPi R2C";
-+ compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328";
-+};
-+
-+&gmac2io {
-+ phy-handle = <&yt8521s>;
-+ tx_delay = <0x22>;
-+ rx_delay = <0x12>;
-+
-+ mdio {
-+ /delete-node/ ethernet-phy@1;
-+
-+ yt8521s: ethernet-phy@3 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <3>;
-+
-+ motorcomm,clk-out-frequency-hz = <125000000>;
-+ motorcomm,keep-pll-enabled;
-+ motorcomm,auto-sleep-disabled;
-+
-+ pinctrl-0 = <ð_phy_reset_pin>;
-+ pinctrl-names = "default";
-+ reset-assert-us = <10000>;
-+ reset-deassert-us = <50000>;
-+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
+++ /dev/null
-From 51712e1d014aaaa4c6e1e7e84932d58b5c0f59ed Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Sat, 3 Dec 2022 15:41:49 +0800
-Subject: [PATCH] arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus
-
-Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
-
-This device is similar to the NanoPi R2S, and has a 16MB
-SPI NOR (mx25l12805d). The reset button is changed to
-directly reset the power supply, another detail is that
-both network ports have independent MAC addresses.
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
-Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../dts/rockchip/rk3328-orangepi-r1-plus.dts | 373 ++++++++++++++++++
- 2 files changed, 374 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
-@@ -0,0 +1,373 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Based on rk3328-nanopi-r2s.dts, which is:
-+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
-+ */
-+
-+/dts-v1/;
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include "rk3328.dtsi"
-+
-+/ {
-+ model = "Xunlong Orange Pi R1 Plus";
-+ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
-+
-+ aliases {
-+ ethernet1 = &rtl8153;
-+ mmc0 = &sdmmc;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial2:1500000n8";
-+ };
-+
-+ gmac_clk: gmac-clock {
-+ compatible = "fixed-clock";
-+ clock-frequency = <125000000>;
-+ clock-output-names = "gmac_clkin";
-+ #clock-cells = <0>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-+ pinctrl-names = "default";
-+
-+ led-0 {
-+ function = LED_FUNCTION_LAN;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led-1 {
-+ function = LED_FUNCTION_STATUS;
-+ color = <LED_COLOR_ID_RED>;
-+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led-2 {
-+ function = LED_FUNCTION_WAN;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ vcc_sd: sdmmc-regulator {
-+ compatible = "regulator-fixed";
-+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
-+ pinctrl-0 = <&sdmmc0m1_pin>;
-+ pinctrl-names = "default";
-+ regulator-name = "vcc_sd";
-+ regulator-boot-on;
-+ vin-supply = <&vcc_io>;
-+ };
-+
-+ vcc_sys: vcc-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ };
-+
-+ vdd_5v_lan: vdd-5v-lan-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
-+ pinctrl-0 = <&lan_vdd_pin>;
-+ pinctrl-names = "default";
-+ regulator-name = "vdd_5v_lan";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ vin-supply = <&vcc_sys>;
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu1 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu2 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&cpu3 {
-+ cpu-supply = <&vdd_arm>;
-+};
-+
-+&display_subsystem {
-+ status = "disabled";
-+};
-+
-+&gmac2io {
-+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
-+ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
-+ clock_in_out = "input";
-+ phy-handle = <&rtl8211e>;
-+ phy-mode = "rgmii";
-+ phy-supply = <&vcc_io>;
-+ pinctrl-0 = <&rgmiim1_pins>;
-+ pinctrl-names = "default";
-+ snps,aal;
-+ rx_delay = <0x18>;
-+ tx_delay = <0x24>;
-+ status = "okay";
-+
-+ mdio {
-+ compatible = "snps,dwmac-mdio";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ rtl8211e: ethernet-phy@1 {
-+ reg = <1>;
-+ pinctrl-0 = <ð_phy_reset_pin>;
-+ pinctrl-names = "default";
-+ reset-assert-us = <10000>;
-+ reset-deassert-us = <50000>;
-+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
-+
-+&i2c1 {
-+ status = "okay";
-+
-+ rk805: pmic@18 {
-+ compatible = "rockchip,rk805";
-+ reg = <0x18>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-+ #clock-cells = <1>;
-+ clock-output-names = "xin32k", "rk805-clkout2";
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ pinctrl-0 = <&pmic_int_l>;
-+ pinctrl-names = "default";
-+ rockchip,system-power-controller;
-+ wakeup-source;
-+
-+ vcc1-supply = <&vcc_sys>;
-+ vcc2-supply = <&vcc_sys>;
-+ vcc3-supply = <&vcc_sys>;
-+ vcc4-supply = <&vcc_sys>;
-+ vcc5-supply = <&vcc_io>;
-+ vcc6-supply = <&vcc_sys>;
-+
-+ regulators {
-+ vdd_log: DCDC_REG1 {
-+ regulator-name = "vdd_log";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <712500>;
-+ regulator-max-microvolt = <1450000>;
-+ regulator-ramp-delay = <12500>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1000000>;
-+ };
-+ };
-+
-+ vdd_arm: DCDC_REG2 {
-+ regulator-name = "vdd_arm";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <712500>;
-+ regulator-max-microvolt = <1450000>;
-+ regulator-ramp-delay = <12500>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <950000>;
-+ };
-+ };
-+
-+ vcc_ddr: DCDC_REG3 {
-+ regulator-name = "vcc_ddr";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ vcc_io: DCDC_REG4 {
-+ regulator-name = "vcc_io";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3300000>;
-+ };
-+ };
-+
-+ vcc_18: LDO_REG1 {
-+ regulator-name = "vcc_18";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vcc18_emmc: LDO_REG2 {
-+ regulator-name = "vcc18_emmc";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vdd_10: LDO_REG3 {
-+ regulator-name = "vdd_10";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1000000>;
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&io_domains {
-+ pmuio-supply = <&vcc_io>;
-+ vccio1-supply = <&vcc_io>;
-+ vccio2-supply = <&vcc18_emmc>;
-+ vccio3-supply = <&vcc_io>;
-+ vccio4-supply = <&vcc_io>;
-+ vccio5-supply = <&vcc_io>;
-+ vccio6-supply = <&vcc_io>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ gmac2io {
-+ eth_phy_reset_pin: eth-phy-reset-pin {
-+ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
-+ };
-+ };
-+
-+ leds {
-+ lan_led_pin: lan-led-pin {
-+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ sys_led_pin: sys-led-pin {
-+ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ wan_led_pin: wan-led-pin {
-+ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ lan {
-+ lan_vdd_pin: lan-vdd-pin {
-+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ pmic {
-+ pmic_int_l: pmic-int-l {
-+ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+};
-+
-+&pwm2 {
-+ status = "okay";
-+};
-+
-+&sdmmc {
-+ bus-width = <4>;
-+ cap-sd-highspeed;
-+ disable-wp;
-+ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
-+ pinctrl-names = "default";
-+ vmmc-supply = <&vcc_sd>;
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ status = "okay";
-+
-+ flash@0 {
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <50000000>;
-+ };
-+};
-+
-+&tsadc {
-+ rockchip,hw-tshut-mode = <0>;
-+ rockchip,hw-tshut-polarity = <0>;
-+ status = "okay";
-+};
-+
-+&u2phy {
-+ status = "okay";
-+};
-+
-+&u2phy_host {
-+ status = "okay";
-+};
-+
-+&u2phy_otg {
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&usb20_otg {
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usbdrd3 {
-+ dr_mode = "host";
-+ status = "okay";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ /* Second port is for USB 3.0 */
-+ rtl8153: device@2 {
-+ compatible = "usbbda,8153";
-+ reg = <2>;
-+ };
-+};
-+
-+&usb_host0_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+ status = "okay";
-+};
+++ /dev/null
-From 387b3bbac5ea6a0a105d685237f033ffe0f184f1 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 25 Mar 2023 15:40:22 +0800
-Subject: [PATCH] arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
-
-The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
-the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
-identical to OrangePi R1 Plus.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../rockchip/rk3328-orangepi-r1-plus-lts.dts | 40 +++++++++++++++++++
- 2 files changed, 41 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-ev
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
-@@ -0,0 +1,40 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
-+ * (http://www.orangepi.org)
-+ *
-+ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include "rk3328-orangepi-r1-plus.dts"
-+
-+/ {
-+ model = "Xunlong Orange Pi R1 Plus LTS";
-+ compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
-+};
-+
-+&gmac2io {
-+ phy-handle = <&yt8531c>;
-+ tx_delay = <0x19>;
-+ rx_delay = <0x05>;
-+
-+ mdio {
-+ /delete-node/ ethernet-phy@1;
-+
-+ yt8531c: ethernet-phy@0 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <0>;
-+
-+ motorcomm,clk-out-frequency-hz = <125000000>;
-+ motorcomm,keep-pll-enabled;
-+ motorcomm,auto-sleep-disabled;
-+
-+ pinctrl-0 = <ð_phy_reset_pin>;
-+ pinctrl-names = "default";
-+ reset-assert-us = <15000>;
-+ reset-deassert-us = <50000>;
-+ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-+ };
-+ };
-+};
+++ /dev/null
-From c6629b9a6738a64507478527da6c7b83c10a6d2c Mon Sep 17 00:00:00 2001
-From: Vasily Khoruzhick <anarsoul@gmail.com>
-Date: Tue, 7 Mar 2023 22:32:40 -0800
-Subject: [PATCH] arm64: dts: rockchip: Add FriendlyElec Nanopi R5S
-
-FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.
-
-Board Specifications
-- Rockchip RK3568
-- 2 or 4GB LPDDR4X
-- 8GB or 16GB eMMC, SD card slot
-- GbE LAN (Native)
-- 2x 2.5G LAN (PCIe)
-- M.2 Connector
-- HDMI 2.0, MIPI DSI/CSI
-- 2xUSB 3.0 Host
-- USB Type C PD, 5V/9V/12V
-- GPIO: 12-pin 0.5mm FPC connector
-
-Based on Tianling Shen's <cnsztl@gmail.com> work.
-
-Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
-Link: https://lore.kernel.org/r/20230308063240.107178-2-anarsoul@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3568-nanopi-r5s.dts | 713 ++++++++++++++++++
- 2 files changed, 714 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -74,4 +74,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-@@ -0,0 +1,713 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
-+ * (http://www.friendlyelec.com)
-+ *
-+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+ model = "FriendlyElec NanoPi R5S";
-+ compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
-+
-+ aliases {
-+ ethernet0 = &gmac0;
-+ mmc0 = &sdmmc0;
-+ mmc1 = &sdhci;
-+ };
-+
-+ chosen: chosen {
-+ stdout-path = "serial2:1500000n8";
-+ };
-+
-+ hdmi-con {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
-+
-+ led-lan1 {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_LAN;
-+ function-enumerator = <1>;
-+ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led-lan2 {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_LAN;
-+ function-enumerator = <2>;
-+ gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_led: led-power {
-+ color = <LED_COLOR_ID_RED>;
-+ function = LED_FUNCTION_POWER;
-+ linux,default-trigger = "heartbeat";
-+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led-wan {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_WAN;
-+ gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ vdd_usbc: vdd-usbc-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd_usbc";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ };
-+
-+ vcc3v3_sys: vcc3v3-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vdd_usbc>;
-+ };
-+
-+ vcc5v0_sys: vcc5v0-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc5v0_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vdd_usbc>;
-+ };
-+
-+ vcc3v3_pcie: vcc3v3-pcie-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3_pcie";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ enable-active-high;
-+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
-+ startup-delay-us = <200000>;
-+ vin-supply = <&vcc5v0_sys>;
-+ };
-+
-+ vcc5v0_usb: vcc5v0-usb-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc5v0_usb";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vdd_usbc>;
-+ };
-+
-+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vcc5v0_usb_host_en>;
-+ regulator-name = "vcc5v0_usb_host";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_usb>;
-+ };
-+
-+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
-+ regulator-name = "vcc5v0_usb_otg";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_usb>;
-+ };
-+
-+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "pcie30_avdd0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "pcie30_avdd1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+};
-+
-+&combphy0 {
-+ status = "okay";
-+};
-+
-+&combphy1 {
-+ status = "okay";
-+};
-+
-+&combphy2 {
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gmac0 {
-+ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
-+ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
-+ assigned-clock-rates = <0>, <125000000>;
-+ clock_in_out = "output";
-+ phy-handle = <&rgmii_phy0>;
-+ phy-mode = "rgmii-id";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac0_miim
-+ &gmac0_tx_bus2
-+ &gmac0_rx_bus2
-+ &gmac0_rgmii_clk
-+ &gmac0_rgmii_bus>;
-+ snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
-+ snps,reset-active-low;
-+ /* Reset time is 15ms, 50ms for rtl8211f */
-+ snps,reset-delays-us = <0 15000 50000>;
-+ tx_delay = <0x3c>;
-+ rx_delay = <0x2f>;
-+ status = "okay";
-+};
-+
-+&gpu {
-+ mali-supply = <&vdd_gpu>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ avdd-0v9-supply = <&vdda0v9_image>;
-+ avdd-1v8-supply = <&vcca1v8_image>;
-+ status = "okay";
-+};
-+
-+&hdmi_in {
-+ hdmi_in_vp0: endpoint {
-+ remote-endpoint = <&vp0_out_hdmi>;
-+ };
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
-+&hdmi_sound {
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ status = "okay";
-+
-+ vdd_cpu: regulator@1c {
-+ compatible = "tcs,tcs4525";
-+ reg = <0x1c>;
-+ fcs,suspend-voltage-selector = <1>;
-+ regulator-name = "vdd_cpu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1150000>;
-+ regulator-ramp-delay = <2300>;
-+ vin-supply = <&vcc5v0_sys>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ rk809: pmic@20 {
-+ compatible = "rockchip,rk809";
-+ reg = <0x20>;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+ #clock-cells = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pmic_int>;
-+ rockchip,system-power-controller;
-+ vcc1-supply = <&vcc3v3_sys>;
-+ vcc2-supply = <&vcc3v3_sys>;
-+ vcc3-supply = <&vcc3v3_sys>;
-+ vcc4-supply = <&vcc3v3_sys>;
-+ vcc5-supply = <&vcc3v3_sys>;
-+ vcc6-supply = <&vcc3v3_sys>;
-+ vcc7-supply = <&vcc3v3_sys>;
-+ vcc8-supply = <&vcc3v3_sys>;
-+ vcc9-supply = <&vcc3v3_sys>;
-+ wakeup-source;
-+
-+ regulators {
-+ vdd_logic: DCDC_REG1 {
-+ regulator-name = "vdd_logic";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdd_gpu: DCDC_REG2 {
-+ regulator-name = "vdd_gpu";
-+ regulator-always-on;
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_ddr: DCDC_REG3 {
-+ regulator-name = "vcc_ddr";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-initial-mode = <0x2>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ vdd_npu: DCDC_REG4 {
-+ regulator-name = "vdd_npu";
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_1v8: DCDC_REG5 {
-+ regulator-name = "vcc_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda0v9_image: LDO_REG1 {
-+ regulator-name = "vdda0v9_image";
-+ regulator-min-microvolt = <950000>;
-+ regulator-max-microvolt = <950000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda_0v9: LDO_REG2 {
-+ regulator-name = "vdda_0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda0v9_pmu: LDO_REG3 {
-+ regulator-name = "vdda0v9_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <900000>;
-+ };
-+ };
-+
-+ vccio_acodec: LDO_REG4 {
-+ regulator-name = "vccio_acodec";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vccio_sd: LDO_REG5 {
-+ regulator-name = "vccio_sd";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_pmu: LDO_REG6 {
-+ regulator-name = "vcc3v3_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3300000>;
-+ };
-+ };
-+
-+ vcca_1v8: LDO_REG7 {
-+ regulator-name = "vcca_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcca1v8_pmu: LDO_REG8 {
-+ regulator-name = "vcca1v8_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vcca1v8_image: LDO_REG9 {
-+ regulator-name = "vcca1v8_image";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_3v3: SWITCH_REG1 {
-+ regulator-name = "vcc_3v3";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_sd: SWITCH_REG2 {
-+ regulator-name = "vcc3v3_sd";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+ };
-+
-+ };
-+};
-+
-+&i2c5 {
-+ status = "okay";
-+
-+ hym8563: rtc@51 {
-+ compatible = "haoyu,hym8563";
-+ reg = <0x51>;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
-+ #clock-cells = <0>;
-+ clock-output-names = "rtcic_32kout";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&hym8563_int>;
-+ wakeup-source;
-+ };
-+};
-+
-+&i2s0_8ch {
-+ status = "okay";
-+};
-+
-+&i2s1_8ch {
-+ rockchip,trcm-sync-tx-only;
-+ status = "okay";
-+};
-+
-+&mdio0 {
-+ rgmii_phy0: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ pinctrl-0 = <ð_phy0_reset_pin>;
-+ pinctrl-names = "default";
-+ reset-assert-us = <10000>;
-+ reset-deassert-us = <50000>;
-+ reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
-+ };
-+};
-+
-+&pcie2x1 {
-+ num-lanes = <1>;
-+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
-+&pcie30phy {
-+ data-lanes = <1 2>;
-+ status = "okay";
-+};
-+
-+&pcie3x1 {
-+ num-lanes = <1>;
-+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
-+ vpcie3v3-supply = <&vcc3v3_pcie>;
-+ status = "okay";
-+};
-+
-+&pcie3x2 {
-+ num-lanes = <1>;
-+ num-ib-windows = <8>;
-+ num-ob-windows = <8>;
-+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+ vpcie3v3-supply = <&vcc3v3_pcie>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ gmac0 {
-+ eth_phy0_reset_pin: eth-phy0-reset-pin {
-+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ lan1_led_pin: lan1-led-pin {
-+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ lan2_led_pin: lan2-led-pin {
-+ rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ power_led_pin: power-led-pin {
-+ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ wan_led_pin: wan-led-pin {
-+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ hym8563 {
-+ hym8563_int: hym8563-int {
-+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ pmic {
-+ pmic_int: pmic-int {
-+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ usb {
-+ vcc5v0_usb_host_en: vcc5v0-usb-host-en {
-+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
-+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+};
-+
-+&pmu_io_domains {
-+ pmuio1-supply = <&vcc3v3_pmu>;
-+ pmuio2-supply = <&vcc3v3_pmu>;
-+ vccio1-supply = <&vccio_acodec>;
-+ vccio3-supply = <&vccio_sd>;
-+ vccio4-supply = <&vcc_1v8>;
-+ vccio5-supply = <&vcc_3v3>;
-+ vccio6-supply = <&vcc_1v8>;
-+ vccio7-supply = <&vcc_3v3>;
-+ status = "okay";
-+};
-+
-+&saradc {
-+ vref-supply = <&vcca_1v8>;
-+ status = "okay";
-+};
-+
-+&sdhci {
-+ bus-width = <8>;
-+ max-frequency = <200000000>;
-+ non-removable;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
-+ status = "okay";
-+};
-+
-+&sdmmc0 {
-+ max-frequency = <150000000>;
-+ no-sdio;
-+ no-mmc;
-+ bus-width = <4>;
-+ cap-mmc-highspeed;
-+ cap-sd-highspeed;
-+ disable-wp;
-+ vmmc-supply = <&vcc3v3_sd>;
-+ vqmmc-supply = <&vccio_sd>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+ status = "okay";
-+};
-+
-+&tsadc {
-+ rockchip,hw-tshut-mode = <1>;
-+ rockchip,hw-tshut-polarity = <0>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+ status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+ extcon = <&usb2phy0>;
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+ status = "okay";
-+};
-+
-+&usb_host1_xhci {
-+ status = "okay";
-+};
-+
-+&usb2phy0 {
-+ status = "okay";
-+};
-+
-+&usb2phy0_host {
-+ phy-supply = <&vcc5v0_usb_host>;
-+ status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+ status = "okay";
-+};
-+
-+&usb2phy1 {
-+ status = "okay";
-+};
-+
-+&usb2phy1_host {
-+ phy-supply = <&vcc5v0_usb_otg>;
-+ status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+ status = "okay";
-+};
-+
-+&vop {
-+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+ status = "okay";
-+};
-+
-+&vop_mmu {
-+ status = "okay";
-+};
-+
-+&vp0 {
-+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+ remote-endpoint = <&hdmi_in_vp0>;
-+ };
-+};
+++ /dev/null
-From c8ec73b05a95d9f0969ae0f28dd8799a54fcdfc7 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 18 Mar 2023 16:37:41 +0800
-Subject: [PATCH] arm64: dts: rockchip: create common dtsi for NanoPi R5 series
-
-Create common dtsi for the FriendlyElec NanoPi R5 series.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230318083745.6181-2-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3568-nanopi-r5s.dts | 575 +----------------
- .../boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 596 ++++++++++++++++++
- 2 files changed, 597 insertions(+), 574 deletions(-)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-@@ -7,12 +7,7 @@
- */
-
- /dts-v1/;
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/input/input.h>
--#include <dt-bindings/leds/common.h>
--#include <dt-bindings/pinctrl/rockchip.h>
--#include <dt-bindings/soc/rockchip,vop2.h>
--#include "rk3568.dtsi"
-+#include "rk3568-nanopi-r5s.dtsi"
-
- / {
- model = "FriendlyElec NanoPi R5S";
-@@ -20,23 +15,6 @@
-
- aliases {
- ethernet0 = &gmac0;
-- mmc0 = &sdmmc0;
-- mmc1 = &sdhci;
-- };
--
-- chosen: chosen {
-- stdout-path = "serial2:1500000n8";
-- };
--
-- hdmi-con {
-- compatible = "hdmi-connector";
-- type = "a";
--
-- port {
-- hdmi_con_in: endpoint {
-- remote-endpoint = <&hdmi_out_con>;
-- };
-- };
- };
-
- gpio-leds {
-@@ -71,130 +49,6 @@
- gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
- };
- };
--
-- vdd_usbc: vdd-usbc-regulator {
-- compatible = "regulator-fixed";
-- regulator-name = "vdd_usbc";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- };
--
-- vcc3v3_sys: vcc3v3-sys-regulator {
-- compatible = "regulator-fixed";
-- regulator-name = "vcc3v3_sys";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <3300000>;
-- regulator-max-microvolt = <3300000>;
-- vin-supply = <&vdd_usbc>;
-- };
--
-- vcc5v0_sys: vcc5v0-sys-regulator {
-- compatible = "regulator-fixed";
-- regulator-name = "vcc5v0_sys";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- vin-supply = <&vdd_usbc>;
-- };
--
-- vcc3v3_pcie: vcc3v3-pcie-regulator {
-- compatible = "regulator-fixed";
-- regulator-name = "vcc3v3_pcie";
-- regulator-min-microvolt = <3300000>;
-- regulator-max-microvolt = <3300000>;
-- enable-active-high;
-- gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
-- startup-delay-us = <200000>;
-- vin-supply = <&vcc5v0_sys>;
-- };
--
-- vcc5v0_usb: vcc5v0-usb-regulator {
-- compatible = "regulator-fixed";
-- regulator-name = "vcc5v0_usb";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- vin-supply = <&vdd_usbc>;
-- };
--
-- vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-- compatible = "regulator-fixed";
-- enable-active-high;
-- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&vcc5v0_usb_host_en>;
-- regulator-name = "vcc5v0_usb_host";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- vin-supply = <&vcc5v0_usb>;
-- };
--
-- vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-- compatible = "regulator-fixed";
-- enable-active-high;
-- gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&vcc5v0_usb_otg_en>;
-- regulator-name = "vcc5v0_usb_otg";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- vin-supply = <&vcc5v0_usb>;
-- };
--
-- pcie30_avdd0v9: pcie30-avdd0v9-regulator {
-- compatible = "regulator-fixed";
-- regulator-name = "pcie30_avdd0v9";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <900000>;
-- regulator-max-microvolt = <900000>;
-- vin-supply = <&vcc3v3_sys>;
-- };
--
-- pcie30_avdd1v8: pcie30-avdd1v8-regulator {
-- compatible = "regulator-fixed";
-- regulator-name = "pcie30_avdd1v8";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <1800000>;
-- vin-supply = <&vcc3v3_sys>;
-- };
--};
--
--&combphy0 {
-- status = "okay";
--};
--
--&combphy1 {
-- status = "okay";
--};
--
--&combphy2 {
-- status = "okay";
--};
--
--&cpu0 {
-- cpu-supply = <&vdd_cpu>;
--};
--
--&cpu1 {
-- cpu-supply = <&vdd_cpu>;
--};
--
--&cpu2 {
-- cpu-supply = <&vdd_cpu>;
--};
--
--&cpu3 {
-- cpu-supply = <&vdd_cpu>;
- };
-
- &gmac0 {
-@@ -219,292 +73,6 @@
- status = "okay";
- };
-
--&gpu {
-- mali-supply = <&vdd_gpu>;
-- status = "okay";
--};
--
--&hdmi {
-- avdd-0v9-supply = <&vdda0v9_image>;
-- avdd-1v8-supply = <&vcca1v8_image>;
-- status = "okay";
--};
--
--&hdmi_in {
-- hdmi_in_vp0: endpoint {
-- remote-endpoint = <&vp0_out_hdmi>;
-- };
--};
--
--&hdmi_out {
-- hdmi_out_con: endpoint {
-- remote-endpoint = <&hdmi_con_in>;
-- };
--};
--
--&hdmi_sound {
-- status = "okay";
--};
--
--&i2c0 {
-- status = "okay";
--
-- vdd_cpu: regulator@1c {
-- compatible = "tcs,tcs4525";
-- reg = <0x1c>;
-- fcs,suspend-voltage-selector = <1>;
-- regulator-name = "vdd_cpu";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <800000>;
-- regulator-max-microvolt = <1150000>;
-- regulator-ramp-delay = <2300>;
-- vin-supply = <&vcc5v0_sys>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- rk809: pmic@20 {
-- compatible = "rockchip,rk809";
-- reg = <0x20>;
-- interrupt-parent = <&gpio0>;
-- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-- #clock-cells = <1>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&pmic_int>;
-- rockchip,system-power-controller;
-- vcc1-supply = <&vcc3v3_sys>;
-- vcc2-supply = <&vcc3v3_sys>;
-- vcc3-supply = <&vcc3v3_sys>;
-- vcc4-supply = <&vcc3v3_sys>;
-- vcc5-supply = <&vcc3v3_sys>;
-- vcc6-supply = <&vcc3v3_sys>;
-- vcc7-supply = <&vcc3v3_sys>;
-- vcc8-supply = <&vcc3v3_sys>;
-- vcc9-supply = <&vcc3v3_sys>;
-- wakeup-source;
--
-- regulators {
-- vdd_logic: DCDC_REG1 {
-- regulator-name = "vdd_logic";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-init-microvolt = <900000>;
-- regulator-initial-mode = <0x2>;
-- regulator-min-microvolt = <500000>;
-- regulator-max-microvolt = <1350000>;
-- regulator-ramp-delay = <6001>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vdd_gpu: DCDC_REG2 {
-- regulator-name = "vdd_gpu";
-- regulator-always-on;
-- regulator-init-microvolt = <900000>;
-- regulator-initial-mode = <0x2>;
-- regulator-min-microvolt = <500000>;
-- regulator-max-microvolt = <1350000>;
-- regulator-ramp-delay = <6001>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vcc_ddr: DCDC_REG3 {
-- regulator-name = "vcc_ddr";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-initial-mode = <0x2>;
--
-- regulator-state-mem {
-- regulator-on-in-suspend;
-- };
-- };
--
-- vdd_npu: DCDC_REG4 {
-- regulator-name = "vdd_npu";
-- regulator-init-microvolt = <900000>;
-- regulator-initial-mode = <0x2>;
-- regulator-min-microvolt = <500000>;
-- regulator-max-microvolt = <1350000>;
-- regulator-ramp-delay = <6001>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vcc_1v8: DCDC_REG5 {
-- regulator-name = "vcc_1v8";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <1800000>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vdda0v9_image: LDO_REG1 {
-- regulator-name = "vdda0v9_image";
-- regulator-min-microvolt = <950000>;
-- regulator-max-microvolt = <950000>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vdda_0v9: LDO_REG2 {
-- regulator-name = "vdda_0v9";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <900000>;
-- regulator-max-microvolt = <900000>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vdda0v9_pmu: LDO_REG3 {
-- regulator-name = "vdda0v9_pmu";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <900000>;
-- regulator-max-microvolt = <900000>;
--
-- regulator-state-mem {
-- regulator-on-in-suspend;
-- regulator-suspend-microvolt = <900000>;
-- };
-- };
--
-- vccio_acodec: LDO_REG4 {
-- regulator-name = "vccio_acodec";
-- regulator-always-on;
-- regulator-min-microvolt = <3300000>;
-- regulator-max-microvolt = <3300000>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vccio_sd: LDO_REG5 {
-- regulator-name = "vccio_sd";
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <3300000>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vcc3v3_pmu: LDO_REG6 {
-- regulator-name = "vcc3v3_pmu";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <3300000>;
-- regulator-max-microvolt = <3300000>;
--
-- regulator-state-mem {
-- regulator-on-in-suspend;
-- regulator-suspend-microvolt = <3300000>;
-- };
-- };
--
-- vcca_1v8: LDO_REG7 {
-- regulator-name = "vcca_1v8";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <1800000>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vcca1v8_pmu: LDO_REG8 {
-- regulator-name = "vcca1v8_pmu";
-- regulator-always-on;
-- regulator-boot-on;
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <1800000>;
--
-- regulator-state-mem {
-- regulator-on-in-suspend;
-- regulator-suspend-microvolt = <1800000>;
-- };
-- };
--
-- vcca1v8_image: LDO_REG9 {
-- regulator-name = "vcca1v8_image";
-- regulator-min-microvolt = <1800000>;
-- regulator-max-microvolt = <1800000>;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vcc_3v3: SWITCH_REG1 {
-- regulator-name = "vcc_3v3";
-- regulator-always-on;
-- regulator-boot-on;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
--
-- vcc3v3_sd: SWITCH_REG2 {
-- regulator-name = "vcc3v3_sd";
-- regulator-always-on;
-- regulator-boot-on;
--
-- regulator-state-mem {
-- regulator-off-in-suspend;
-- };
-- };
-- };
--
-- };
--};
--
--&i2c5 {
-- status = "okay";
--
-- hym8563: rtc@51 {
-- compatible = "haoyu,hym8563";
-- reg = <0x51>;
-- interrupt-parent = <&gpio0>;
-- interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
-- #clock-cells = <0>;
-- clock-output-names = "rtcic_32kout";
-- pinctrl-names = "default";
-- pinctrl-0 = <&hym8563_int>;
-- wakeup-source;
-- };
--};
--
--&i2s0_8ch {
-- status = "okay";
--};
--
--&i2s1_8ch {
-- rockchip,trcm-sync-tx-only;
-- status = "okay";
--};
--
- &mdio0 {
- rgmii_phy0: ethernet-phy@1 {
- compatible = "ethernet-phy-ieee802.3-c22";
-@@ -568,146 +136,5 @@
- rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
--
-- hym8563 {
-- hym8563_int: hym8563-int {
-- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
-- };
-- };
--
-- pmic {
-- pmic_int: pmic-int {
-- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-- };
-- };
--
-- usb {
-- vcc5v0_usb_host_en: vcc5v0-usb-host-en {
-- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-- };
--
-- vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
-- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-- };
-- };
--};
--
--&pmu_io_domains {
-- pmuio1-supply = <&vcc3v3_pmu>;
-- pmuio2-supply = <&vcc3v3_pmu>;
-- vccio1-supply = <&vccio_acodec>;
-- vccio3-supply = <&vccio_sd>;
-- vccio4-supply = <&vcc_1v8>;
-- vccio5-supply = <&vcc_3v3>;
-- vccio6-supply = <&vcc_1v8>;
-- vccio7-supply = <&vcc_3v3>;
-- status = "okay";
--};
--
--&saradc {
-- vref-supply = <&vcca_1v8>;
-- status = "okay";
--};
--
--&sdhci {
-- bus-width = <8>;
-- max-frequency = <200000000>;
-- non-removable;
-- pinctrl-names = "default";
-- pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
-- status = "okay";
--};
--
--&sdmmc0 {
-- max-frequency = <150000000>;
-- no-sdio;
-- no-mmc;
-- bus-width = <4>;
-- cap-mmc-highspeed;
-- cap-sd-highspeed;
-- disable-wp;
-- vmmc-supply = <&vcc3v3_sd>;
-- vqmmc-supply = <&vccio_sd>;
-- pinctrl-names = "default";
-- pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-- status = "okay";
--};
--
--&tsadc {
-- rockchip,hw-tshut-mode = <1>;
-- rockchip,hw-tshut-polarity = <0>;
-- status = "okay";
--};
--
--&uart2 {
-- status = "okay";
--};
--
--&usb_host0_ehci {
-- status = "okay";
--};
--
--&usb_host0_ohci {
-- status = "okay";
--};
--
--&usb_host0_xhci {
-- extcon = <&usb2phy0>;
-- dr_mode = "host";
-- status = "okay";
--};
--
--&usb_host1_ehci {
-- status = "okay";
--};
--
--&usb_host1_ohci {
-- status = "okay";
- };
-
--&usb_host1_xhci {
-- status = "okay";
--};
--
--&usb2phy0 {
-- status = "okay";
--};
--
--&usb2phy0_host {
-- phy-supply = <&vcc5v0_usb_host>;
-- status = "okay";
--};
--
--&usb2phy0_otg {
-- status = "okay";
--};
--
--&usb2phy1 {
-- status = "okay";
--};
--
--&usb2phy1_host {
-- phy-supply = <&vcc5v0_usb_otg>;
-- status = "okay";
--};
--
--&usb2phy1_otg {
-- status = "okay";
--};
--
--&vop {
-- assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-- assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-- status = "okay";
--};
--
--&vop_mmu {
-- status = "okay";
--};
--
--&vp0 {
-- vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-- reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-- remote-endpoint = <&hdmi_in_vp0>;
-- };
--};
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
-@@ -0,0 +1,596 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
-+ * (http://www.friendlyelec.com)
-+ *
-+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include <dt-bindings/soc/rockchip,vop2.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+ aliases {
-+ mmc0 = &sdmmc0;
-+ mmc1 = &sdhci;
-+ };
-+
-+ chosen: chosen {
-+ stdout-path = "serial2:1500000n8";
-+ };
-+
-+ hdmi-con {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
-+ vdd_usbc: vdd-usbc-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vdd_usbc";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ };
-+
-+ vcc3v3_sys: vcc3v3-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vdd_usbc>;
-+ };
-+
-+ vcc5v0_sys: vcc5v0-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc5v0_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vdd_usbc>;
-+ };
-+
-+ vcc3v3_pcie: vcc3v3-pcie-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3_pcie";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ enable-active-high;
-+ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
-+ startup-delay-us = <200000>;
-+ vin-supply = <&vcc5v0_sys>;
-+ };
-+
-+ vcc5v0_usb: vcc5v0-usb-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc5v0_usb";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vdd_usbc>;
-+ };
-+
-+ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vcc5v0_usb_host_en>;
-+ regulator-name = "vcc5v0_usb_host";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_usb>;
-+ };
-+
-+ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vcc5v0_usb_otg_en>;
-+ regulator-name = "vcc5v0_usb_otg";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_usb>;
-+ };
-+
-+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "pcie30_avdd0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "pcie30_avdd1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+};
-+
-+&combphy0 {
-+ status = "okay";
-+};
-+
-+&combphy1 {
-+ status = "okay";
-+};
-+
-+&combphy2 {
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gpu {
-+ mali-supply = <&vdd_gpu>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ avdd-0v9-supply = <&vdda0v9_image>;
-+ avdd-1v8-supply = <&vcca1v8_image>;
-+ status = "okay";
-+};
-+
-+&hdmi_in {
-+ hdmi_in_vp0: endpoint {
-+ remote-endpoint = <&vp0_out_hdmi>;
-+ };
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
-+&hdmi_sound {
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ status = "okay";
-+
-+ vdd_cpu: regulator@1c {
-+ compatible = "tcs,tcs4525";
-+ reg = <0x1c>;
-+ fcs,suspend-voltage-selector = <1>;
-+ regulator-name = "vdd_cpu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1150000>;
-+ regulator-ramp-delay = <2300>;
-+ vin-supply = <&vcc5v0_sys>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ rk809: pmic@20 {
-+ compatible = "rockchip,rk809";
-+ reg = <0x20>;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+ #clock-cells = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pmic_int>;
-+ rockchip,system-power-controller;
-+ vcc1-supply = <&vcc3v3_sys>;
-+ vcc2-supply = <&vcc3v3_sys>;
-+ vcc3-supply = <&vcc3v3_sys>;
-+ vcc4-supply = <&vcc3v3_sys>;
-+ vcc5-supply = <&vcc3v3_sys>;
-+ vcc6-supply = <&vcc3v3_sys>;
-+ vcc7-supply = <&vcc3v3_sys>;
-+ vcc8-supply = <&vcc3v3_sys>;
-+ vcc9-supply = <&vcc3v3_sys>;
-+ wakeup-source;
-+
-+ regulators {
-+ vdd_logic: DCDC_REG1 {
-+ regulator-name = "vdd_logic";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdd_gpu: DCDC_REG2 {
-+ regulator-name = "vdd_gpu";
-+ regulator-always-on;
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_ddr: DCDC_REG3 {
-+ regulator-name = "vcc_ddr";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-initial-mode = <0x2>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ vdd_npu: DCDC_REG4 {
-+ regulator-name = "vdd_npu";
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_1v8: DCDC_REG5 {
-+ regulator-name = "vcc_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda0v9_image: LDO_REG1 {
-+ regulator-name = "vdda0v9_image";
-+ regulator-min-microvolt = <950000>;
-+ regulator-max-microvolt = <950000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda_0v9: LDO_REG2 {
-+ regulator-name = "vdda_0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda0v9_pmu: LDO_REG3 {
-+ regulator-name = "vdda0v9_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <900000>;
-+ };
-+ };
-+
-+ vccio_acodec: LDO_REG4 {
-+ regulator-name = "vccio_acodec";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vccio_sd: LDO_REG5 {
-+ regulator-name = "vccio_sd";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_pmu: LDO_REG6 {
-+ regulator-name = "vcc3v3_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3300000>;
-+ };
-+ };
-+
-+ vcca_1v8: LDO_REG7 {
-+ regulator-name = "vcca_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcca1v8_pmu: LDO_REG8 {
-+ regulator-name = "vcca1v8_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vcca1v8_image: LDO_REG9 {
-+ regulator-name = "vcca1v8_image";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_3v3: SWITCH_REG1 {
-+ regulator-name = "vcc_3v3";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_sd: SWITCH_REG2 {
-+ regulator-name = "vcc3v3_sd";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+ };
-+
-+ };
-+};
-+
-+&i2c5 {
-+ status = "okay";
-+
-+ hym8563: rtc@51 {
-+ compatible = "haoyu,hym8563";
-+ reg = <0x51>;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
-+ #clock-cells = <0>;
-+ clock-output-names = "rtcic_32kout";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&hym8563_int>;
-+ wakeup-source;
-+ };
-+};
-+
-+&i2s0_8ch {
-+ status = "okay";
-+};
-+
-+&i2s1_8ch {
-+ rockchip,trcm-sync-tx-only;
-+ status = "okay";
-+};
-+
-+&pcie30phy {
-+ data-lanes = <1 2>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ hym8563 {
-+ hym8563_int: hym8563-int {
-+ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ pmic {
-+ pmic_int: pmic-int {
-+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ usb {
-+ vcc5v0_usb_host_en: vcc5v0-usb-host-en {
-+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
-+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+};
-+
-+&pmu_io_domains {
-+ pmuio1-supply = <&vcc3v3_pmu>;
-+ pmuio2-supply = <&vcc3v3_pmu>;
-+ vccio1-supply = <&vccio_acodec>;
-+ vccio3-supply = <&vccio_sd>;
-+ vccio4-supply = <&vcc_1v8>;
-+ vccio5-supply = <&vcc_3v3>;
-+ vccio6-supply = <&vcc_1v8>;
-+ vccio7-supply = <&vcc_3v3>;
-+ status = "okay";
-+};
-+
-+&saradc {
-+ vref-supply = <&vcca_1v8>;
-+ status = "okay";
-+};
-+
-+&sdhci {
-+ bus-width = <8>;
-+ max-frequency = <200000000>;
-+ non-removable;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
-+ status = "okay";
-+};
-+
-+&sdmmc0 {
-+ max-frequency = <150000000>;
-+ no-sdio;
-+ no-mmc;
-+ bus-width = <4>;
-+ cap-mmc-highspeed;
-+ cap-sd-highspeed;
-+ disable-wp;
-+ vmmc-supply = <&vcc3v3_sd>;
-+ vqmmc-supply = <&vccio_sd>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
-+ status = "okay";
-+};
-+
-+&tsadc {
-+ rockchip,hw-tshut-mode = <1>;
-+ rockchip,hw-tshut-polarity = <0>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+ status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+ extcon = <&usb2phy0>;
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+ status = "okay";
-+};
-+
-+&usb_host1_xhci {
-+ status = "okay";
-+};
-+
-+&usb2phy0 {
-+ status = "okay";
-+};
-+
-+&usb2phy0_host {
-+ phy-supply = <&vcc5v0_usb_host>;
-+ status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+ status = "okay";
-+};
-+
-+&usb2phy1 {
-+ status = "okay";
-+};
-+
-+&usb2phy1_host {
-+ phy-supply = <&vcc5v0_usb_otg>;
-+ status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+ status = "okay";
-+};
-+
-+&vop {
-+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+ status = "okay";
-+};
-+
-+&vop_mmu {
-+ status = "okay";
-+};
-+
-+&vp0 {
-+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+ remote-endpoint = <&hdmi_in_vp0>;
-+ };
-+};
+++ /dev/null
-From 31425b1fadb2040b359e52ffc24c049a78d56c96 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 18 Mar 2023 16:37:44 +0800
-Subject: [PATCH] arm64: dts: rockchip: fix gmac support for NanoPi R5S
-
-- Changed phy-mode to rgmii.
-
-- Fixed pull type in pinctrl for gmac0.
-
-- Removed duplicate properties in mdio node.
- These properties are defined in the gmac0 node already.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230318083745.6181-5-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-@@ -57,7 +57,7 @@
- assigned-clock-rates = <0>, <125000000>;
- clock_in_out = "output";
- phy-handle = <&rgmii_phy0>;
-- phy-mode = "rgmii-id";
-+ phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&gmac0_miim
- &gmac0_tx_bus2
-@@ -79,9 +79,6 @@
- reg = <1>;
- pinctrl-0 = <ð_phy0_reset_pin>;
- pinctrl-names = "default";
-- reset-assert-us = <10000>;
-- reset-deassert-us = <50000>;
-- reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
- };
- };
-
-@@ -115,7 +112,7 @@
- &pinctrl {
- gmac0 {
- eth_phy0_reset_pin: eth-phy0-reset-pin {
-- rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
-+ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
+++ /dev/null
-From 975e9bbad11950fc8276f1fa260d8bf2c341aa41 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 18 Mar 2023 16:37:45 +0800
-Subject: [PATCH] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5
- series
-
-This is for the audio output which does not exist on the boards.
-Also disable regulator-always-on for vccio_acodec since it's only
-used by the audio output.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230318083745.6181-6-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
- 1 file changed, 6 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
-@@ -330,7 +330,6 @@
-
- vccio_acodec: LDO_REG4 {
- regulator-name = "vccio_acodec";
-- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
-@@ -441,11 +440,6 @@
- status = "okay";
- };
-
--&i2s1_8ch {
-- rockchip,trcm-sync-tx-only;
-- status = "okay";
--};
--
- &pcie30phy {
- data-lanes = <1 2>;
- status = "okay";
+++ /dev/null
-From 05620031408ac6cfc6d5c048431827e49aa0ade1 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 18 Mar 2023 16:37:43 +0800
-Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R5C
-
-FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.
-
-Specification:
-- Rockchip RK3568
-- 1/4GB LPDDR4X RAM
-- 8/32GB eMMC
-- SD card slot
-- M.2 Connector
-- 2x USB 3.0 Port
-- 2x 2500 Base-T (PCIe, r8125)
-- HDMI 2.0
-- MIPI DSI/CSI
-- USB Type C 5V
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230318083745.6181-4-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3568-nanopi-r5c.dts | 112 ++++++++++++++++++
- 2 files changed, 113 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -74,5 +74,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
-@@ -0,0 +1,112 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
-+ * (http://www.friendlyelec.com)
-+ *
-+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include "rk3568-nanopi-r5s.dtsi"
-+
-+/ {
-+ model = "FriendlyElec NanoPi R5C";
-+ compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
-+
-+ gpio-keys {
-+ compatible = "gpio-keys";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&reset_button_pin>;
-+
-+ button-reset {
-+ debounce-interval = <50>;
-+ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
-+ label = "reset";
-+ linux,code = <KEY_RESTART>;
-+ };
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
-+
-+ led-lan {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_LAN;
-+ gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ power_led: led-power {
-+ color = <LED_COLOR_ID_RED>;
-+ function = LED_FUNCTION_POWER;
-+ linux,default-trigger = "heartbeat";
-+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led-wan {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_WAN;
-+ gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ led-wlan {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_WLAN;
-+ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+};
-+
-+&pcie2x1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie20_reset_pin>;
-+ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
-+&pcie3x1 {
-+ num-lanes = <1>;
-+ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
-+ vpcie3v3-supply = <&vcc3v3_pcie>;
-+ status = "okay";
-+};
-+
-+&pcie3x2 {
-+ num-lanes = <1>;
-+ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
-+ vpcie3v3-supply = <&vcc3v3_pcie>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ gpio-leds {
-+ lan_led_pin: lan-led-pin {
-+ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ power_led_pin: power-led-pin {
-+ rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ wan_led_pin: wan-led-pin {
-+ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ wlan_led_pin: wlan-led-pin {
-+ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ pcie {
-+ pcie20_reset_pin: pcie20-reset-pin {
-+ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ rockchip-key {
-+ reset_button_pin: reset-button-pin {
-+ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+};
+++ /dev/null
-From 5325593377f07de31f7e473a9677a28a04c891f3 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Thu, 11 May 2023 00:18:50 +0800
-Subject: [PATCH] arm64: dts: rockchip: fix button reset pin for nanopi r5c
-
-The reset pin was wrongly assigned due to a copy/paste error,
-fix it to match actual gpio pin.
-
-While at it, remove a blank line from nanopi r5s dts.
-
-Fixes: 05620031408a ("arm64: dts: rockchip: Add FriendlyARM NanoPi R5C")
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230510161850.4866-1-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts | 2 +-
- arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 1 -
- 2 files changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
-@@ -106,7 +106,7 @@
-
- rockchip-key {
- reset_button_pin: reset-button-pin {
-- rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
-+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
- };
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-@@ -134,4 +134,3 @@
- };
- };
- };
--
+++ /dev/null
-From fc5a80a432607d05e85bba37971712405f75c546 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 16 Dec 2023 12:07:23 +0800
-Subject: [PATCH] arm64: dts: rockchip: configure eth pad driver strength
- for orangepi r1 plus lts
-
-The default strength is not enough to provide stable connection
-under 3.3v LDO voltage.
-
-Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")
-Cc: stable@vger.kernel.org # 6.6+
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20231216040723.17864-1-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
-@@ -26,9 +26,11 @@
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
-
-+ motorcomm,auto-sleep-disabled;
- motorcomm,clk-out-frequency-hz = <125000000>;
- motorcomm,keep-pll-enabled;
-- motorcomm,auto-sleep-disabled;
-+ motorcomm,rx-clk-drv-microamp = <5020>;
-+ motorcomm,rx-data-drv-microamp = <5020>;
-
- pinctrl-0 = <ð_phy_reset_pin>;
- pinctrl-names = "default";
+++ /dev/null
-From 096ebfb74b19f2d4bdcbc33ae02e857ff4b3e0a0 Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Thu, 12 Jan 2023 16:29:02 +0530
-Subject: [PATCH] arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
-
-Radxa Compute Module 3(CM3) IO board is an application board from Radxa
-and is compatible with Raspberry Pi CM4 IO form factor.
-
-Specification:
-- 1x HDMI,
-- 2x MIPI DSI
-- 2x MIPI CSI2
-- 1x eDP
-- 1x PCIe card
-- 2x SATA
-- 2x USB 2.0 Host
-- 1x USB 3.0
-- 1x USB 2.0 OTG
-- Phone jack
-- microSD slot
-- 40-pin GPIO expansion header
-- 12V DC
-
-Radxa CM3 needs to mount on top of this IO board in order to create
-complete Radxa CM3 IO board platform.
-
-Add support for Radxa CM3 IO Board.
-
-Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
-Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
-Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
-Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230112105902.192852-3-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 179 ++++++++++++++++++
- 2 files changed, 180 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pi
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-@@ -0,0 +1,179 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Radxa Limited
-+ * Copyright (c) 2022 Amarula Solutions(India)
-+ */
-+
-+/dts-v1/;
-+#include <dt-bindings/soc/rockchip,vop2.h>
-+#include "rk3566.dtsi"
-+#include "rk3566-radxa-cm3.dtsi"
-+
-+/ {
-+ model = "Radxa Compute Module 3(CM3) IO Board";
-+ compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
-+
-+ aliases {
-+ mmc1 = &sdmmc0;
-+ };
-+
-+ chosen: chosen {
-+ stdout-path = "serial2:1500000n8";
-+ };
-+
-+ hdmi-con {
-+ compatible = "hdmi-connector";
-+ type = "a";
-+
-+ port {
-+ hdmi_con_in: endpoint {
-+ remote-endpoint = <&hdmi_out_con>;
-+ };
-+ };
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led-1 {
-+ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_ACTIVITY;
-+ linux,default-trigger = "heartbeat";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pi_nled_activity>;
-+ };
-+ };
-+
-+ vcc5v0_usb30: vcc5v0-usb30-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc5v0_usb30";
-+ enable-active-high;
-+ gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vcc5v0_usb30_en_h>;
-+ regulator-always-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc_sys>;
-+ };
-+
-+ vcca1v8_image: vcca1v8-image-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcca1v8_image";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vin-supply = <&vcc_1v8_p>;
-+ };
-+
-+ vdda0v9_image: vdda0v9-image-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcca0v9_image";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ vin-supply = <&vdda_0v9>;
-+ };
-+};
-+
-+&combphy1 {
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ avdd-0v9-supply = <&vdda0v9_image>;
-+ avdd-1v8-supply = <&vcca1v8_image>;
-+ status = "okay";
-+};
-+
-+&hdmi_in {
-+ hdmi_in_vp0: endpoint {
-+ remote-endpoint = <&vp0_out_hdmi>;
-+ };
-+};
-+
-+&hdmi_out {
-+ hdmi_out_con: endpoint {
-+ remote-endpoint = <&hdmi_con_in>;
-+ };
-+};
-+
-+&hdmi_sound {
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ leds {
-+ pi_nled_activity: pi-nled-activity {
-+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ sdcard {
-+ sdmmc_pwren: sdmmc-pwren {
-+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ usb {
-+ vcc5v0_usb30_en_h: vcc5v0-host-en-h {
-+ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+};
-+
-+&sdmmc0 {
-+ bus-width = <4>;
-+ cap-mmc-highspeed;
-+ cap-sd-highspeed;
-+ disable-wp;
-+ vqmmc-supply = <&vccio_sd>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&usb2phy0_host {
-+ phy-supply = <&vcc5v0_usb30>;
-+ status = "okay";
-+};
-+
-+&usb2phy1_host {
-+ status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+ status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host1_xhci {
-+ status = "okay";
-+};
-+
-+&vop {
-+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
-+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
-+ status = "okay";
-+};
-+
-+&vop_mmu {
-+ status = "okay";
-+};
-+
-+&vp0 {
-+ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
-+ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
-+ remote-endpoint = <&hdmi_in_vp0>;
-+ };
-+};
+++ /dev/null
-From d211665c5a833873ee37e501af58adbf028e6b5f Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Sat, 13 May 2023 21:53:07 +0800
-Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus
-
-The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board
-eMMC flash (8G) included.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
-Link: https://lore.kernel.org/r/20230513135307.26554-2-cnsztl@gmail.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts | 33 ++++++++++++++++++++++
- 2 files changed, 34 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-od
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
-@@ -0,0 +1,33 @@
-+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-+/*
-+ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
-+ * (http://www.friendlyarm.com)
-+ *
-+ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
-+ */
-+
-+/dts-v1/;
-+#include "rk3328-nanopi-r2c.dts"
-+
-+/ {
-+ model = "FriendlyElec NanoPi R2C Plus";
-+ compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328";
-+
-+ aliases {
-+ mmc1 = &emmc;
-+ };
-+};
-+
-+&emmc {
-+ bus-width = <8>;
-+ cap-mmc-highspeed;
-+ max-frequency = <150000000>;
-+ mmc-ddr-1_8v;
-+ mmc-hs200-1_8v;
-+ non-removable;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
-+ vmmc-supply = <&vcc_io_33>;
-+ vqmmc-supply = <&vcc18_emmc>;
-+ status = "okay";
-+};
+++ /dev/null
-From cc52bfc04726a574fc4440bbbe0c710890e7040a Mon Sep 17 00:00:00 2001
-From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
-Date: Wed, 25 Jan 2023 21:40:22 +0530
-Subject: [PATCH] arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
-
-Add ethernet nodes for enabling gmac1 on the Radxa CM3 IO board.
-
-Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230125161023.12115-1-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 93 +++++++++++++++++++
- 1 file changed, 93 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-@@ -21,6 +21,13 @@
- stdout-path = "serial2:1500000n8";
- };
-
-+ gmac1_clkin: external-gmac1-clock {
-+ compatible = "fixed-clock";
-+ clock-frequency = <125000000>;
-+ clock-output-names = "gmac1_clkin";
-+ #clock-cells = <0>;
-+ };
-+
- hdmi-con {
- compatible = "hdmi-connector";
- type = "a";
-@@ -83,6 +90,29 @@
- status = "okay";
- };
-
-+&gmac1 {
-+ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
-+ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
-+ assigned-clock-rates = <0>, <125000000>;
-+ clock_in_out = "input";
-+ phy-handle = <&rgmii_phy1>;
-+ phy-mode = "rgmii";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac1m0_miim
-+ &gmac1m0_tx_bus2
-+ &gmac1m0_rx_bus2
-+ &gmac1m0_rgmii_clk
-+ &gmac1m0_rgmii_bus
-+ &gmac1m0_clkinout>;
-+ snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
-+ snps,reset-active-low;
-+ /* Reset time is 20ms, 100ms for rtl8211f */
-+ snps,reset-delays-us = <0 20000 100000>;
-+ tx_delay = <0x46>;
-+ rx_delay = <0x2e>;
-+ status = "okay";
-+};
-+
- &hdmi {
- avdd-0v9-supply = <&vdda0v9_image>;
- avdd-1v8-supply = <&vcca1v8_image>;
-@@ -105,7 +135,70 @@
- status = "okay";
- };
-
-+&mdio1 {
-+ rgmii_phy1: ethernet-phy@0 {
-+ compatible="ethernet-phy-ieee802.3-c22";
-+ reg= <0x0>;
-+ };
-+};
-+
- &pinctrl {
-+ gmac1 {
-+ gmac1m0_miim: gmac1m0-miim {
-+ rockchip,pins =
-+ /* gmac1_mdcm0 */
-+ <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_mdiom0 */
-+ <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
-+ };
-+
-+ gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
-+ rockchip,pins =
-+ /* gmac1_rxd0m0 */
-+ <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_rxd1m0 */
-+ <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_rxdvcrsm0 */
-+ <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
-+ };
-+
-+ gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
-+ rockchip,pins =
-+ /* gmac1_txd0m0 */
-+ <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_txd1m0 */
-+ <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_txenm0 */
-+ <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
-+ };
-+
-+ gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
-+ rockchip,pins =
-+ /* gmac1_rxclkm0 */
-+ <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_txclkm0 */
-+ <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
-+ };
-+
-+ gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
-+ rockchip,pins =
-+ /* gmac1_rxd2m0 */
-+ <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_rxd3m0 */
-+ <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_txd2m0 */
-+ <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
-+ /* gmac1_txd3m0 */
-+ <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
-+ };
-+
-+ gmac1m0_clkinout: gmac1m0-clkinout {
-+ rockchip,pins =
-+ /* gmac1_mclkinoutm0 */
-+ <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
-+ };
-+ };
-+
- leds {
- pi_nled_activity: pi-nled-activity {
- rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+++ /dev/null
-From 7469ab529bcad50490f6ff651c3e4f03bfa88fe0 Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Thu, 12 Jan 2023 16:29:01 +0530
-Subject: [PATCH] arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Radxa Compute Module 3(CM3) is one of the modules from a series
-System On Module based on the Radxa ROCK 3 series and is compatible
-with Raspberry Pi CM4 pinout and form factor.
-
-Specification:
-- Rockchip RK3566
-- up to 8GB LPDDR4
-- up to 128GB high performance eMMC
-- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
- BT 5.0, BLE with onboard and external antenna.
-- Gigabit Ethernet PHY
-
-Radxa CM3 needs to mount on top of this IO board in order to create
-complete Radxa CM3 IO board platform.
-
-Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is
-possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board.
-
-Add support for Radxa CM3.
-
-Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
-Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230112105902.192852-2-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 345 ++++++++++++++++++
- 1 file changed, 345 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-@@ -0,0 +1,345 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (c) 2022 Radxa Limited
-+ * Copyright (c) 2022 Amarula Solutions(India)
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+ compatible = "radxa,radxa-cm3", "rockchip,rk3566";
-+
-+ aliases {
-+ mmc0 = &sdhci;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led-0 {
-+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_STATUS;
-+ linux,default-trigger = "timer";
-+ default-state = "on";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&user_led2>;
-+ };
-+ };
-+
-+ vcc_sys: vcc-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ };
-+
-+ vcc_1v8: vcc-1v8-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vin-supply = <&vcc_1v8_p>;
-+ };
-+
-+ vcc_3v3: vcc-3v3-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_3v3";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ vcca_1v8: vcca-1v8-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcca_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vin-supply = <&vcc_1v8_p>;
-+ };
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&gpu {
-+ mali-supply = <&vdd_gpu_npu>;
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ status = "okay";
-+
-+ vdd_cpu: regulator@1c {
-+ compatible = "tcs,tcs4525";
-+ reg = <0x1c>;
-+ fcs,suspend-voltage-selector = <1>;
-+ regulator-name = "vdd_cpu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <712500>;
-+ regulator-max-microvolt = <1390000>;
-+ regulator-ramp-delay = <2300>;
-+ vin-supply = <&vcc_sys>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ rk817: pmic@20 {
-+ compatible = "rockchip,rk817";
-+ reg = <0x20>;
-+ #clock-cells = <1>;
-+ clock-output-names = "rk817-clkout1", "rk817-clkout2";
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pmic_int_l>;
-+ rockchip,system-power-controller;
-+ wakeup-source;
-+
-+ vcc1-supply = <&vcc_sys>;
-+ vcc2-supply = <&vcc_sys>;
-+ vcc3-supply = <&vcc_sys>;
-+ vcc4-supply = <&vcc_sys>;
-+ vcc5-supply = <&vcc_sys>;
-+ vcc6-supply = <&vcc_sys>;
-+ vcc7-supply = <&vcc_sys>;
-+
-+ regulators {
-+ vdd_logic: DCDC_REG1 {
-+ regulator-name = "vdd_logic";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <900000>;
-+ };
-+ };
-+
-+ vdd_gpu_npu: DCDC_REG2 {
-+ regulator-name = "vdd_gpu_npu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_ddr: DCDC_REG3 {
-+ regulator-name = "vcc_ddr";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-initial-mode = <0x2>;
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_sys: DCDC_REG4 {
-+ regulator-name = "vcc3v3_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3300000>;
-+ };
-+ };
-+
-+ vcca1v8_pmu: LDO_REG1 {
-+ regulator-name = "vcca1v8_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vdda_0v9: LDO_REG2 {
-+ regulator-name = "vdda_0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda0v9_pmu: LDO_REG3 {
-+ regulator-name = "vdda0v9_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <900000>;
-+ };
-+ };
-+
-+ vccio_acodec: LDO_REG4 {
-+ regulator-name = "vccio_acodec";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vccio_sd: LDO_REG5 {
-+ regulator-name = "vccio_sd";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_pmu: LDO_REG6 {
-+ regulator-name = "vcc3v3_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3300000>;
-+ };
-+ };
-+
-+ vcc_1v8_p: LDO_REG7 {
-+ regulator-name = "vcc_1v8_p";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc1v8_dvp: LDO_REG8 {
-+ regulator-name = "vcc1v8_dvp";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc2v8_dvp: LDO_REG9 {
-+ regulator-name = "vcc2v8_dvp";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <2800000>;
-+ regulator-max-microvolt = <2800000>;
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ };
-+ };
-+};
-+
-+&pinctrl {
-+ pmic {
-+ pmic_int_l: pmic-int-l {
-+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+
-+ leds {
-+ user_led2: user-led2 {
-+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+};
-+
-+&pmu_io_domains {
-+ pmuio1-supply = <&vcc3v3_pmu>;
-+ pmuio2-supply = <&vcc_3v3>;
-+ vccio1-supply = <&vccio_acodec>;
-+ vccio2-supply = <&vcc_1v8>;
-+ vccio3-supply = <&vccio_sd>;
-+ vccio4-supply = <&vcc_1v8>;
-+ vccio5-supply = <&vcc_3v3>;
-+ vccio6-supply = <&vcc_3v3>;
-+ vccio7-supply = <&vcc_3v3>;
-+ status = "okay";
-+};
-+
-+&saradc {
-+ vref-supply = <&vcca_1v8>;
-+ status = "okay";
-+};
-+
-+&sdhci {
-+ bus-width = <8>;
-+ max-frequency = <200000000>;
-+ mmc-hs200-1_8v;
-+ non-removable;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
-+ vmmc-supply = <&vcc_3v3>;
-+ vqmmc-supply = <&vcc_1v8>;
-+ status = "okay";
-+};
-+
-+&usb2phy0 {
-+ status = "okay";
-+};
-+
-+&usb2phy1 {
-+ status = "okay";
-+};
-+
-+&tsadc {
-+ rockchip,hw-tshut-mode = <1>;
-+ rockchip,hw-tshut-polarity = <0>;
-+ status = "okay";
-+};
+++ /dev/null
-From af5a803bf212e077e5fb7a1d4cf6be02f74a74ca Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Wed, 25 Jan 2023 21:40:23 +0530
-Subject: [PATCH] arm64: dts: rockchip: rk3566: Enable WiFi, BT support for
- Radxa CM3
-
-Radxa Compute Module 3 has an onboard AW_CM256SM WiFi/BT module.
-
-Add nodes for enabling it.
-
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230125161023.12115-2-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 80 +++++++++++++++++++
- 1 file changed, 80 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-@@ -66,6 +66,15 @@
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8_p>;
- };
-+
-+ sdio_pwrseq: pwrseq-sdio {
-+ compatible = "mmc-pwrseq-simple";
-+ clocks = <&rk817 1>;
-+ clock-names = "ext_clock";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&wifi_reg_on_h>;
-+ reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
-+ };
- };
-
- &cpu0 {
-@@ -287,6 +296,20 @@
- };
-
- &pinctrl {
-+ bluetooth {
-+ bt_host_wake_h: bt-host-wake-h {
-+ rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ bt_reg_on_h: bt-reg-on-h {
-+ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ bt_wake_host_h: bt-wake-host-h {
-+ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-@@ -298,6 +321,16 @@
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-+
-+ wifi {
-+ wifi_reg_on_h: wifi-reg-on-h {
-+ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ wifi_host_wake_h: wifi-host-wake-h {
-+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
- };
-
- &pmu_io_domains {
-@@ -318,6 +351,34 @@
- status = "okay";
- };
-
-+&sdmmc1 {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ bus-width = <4>;
-+ disable-wp;
-+ cap-sd-highspeed;
-+ cap-sdio-irq;
-+ keep-power-in-suspend;
-+ mmc-pwrseq = <&sdio_pwrseq>;
-+ non-removable;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
-+ sd-uhs-sdr104;
-+ vmmc-supply = <&vcc_3v3>;
-+ vqmmc-supply = <&vcc_1v8>;
-+ status = "okay";
-+
-+ wifi@1 {
-+ compatible = "brcm,bcm43455-fmac";
-+ reg = <1>;
-+ interrupt-parent = <&gpio2>;
-+ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "host-wake";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&wifi_host_wake_h>;
-+ };
-+};
-+
- &sdhci {
- bus-width = <8>;
- max-frequency = <200000000>;
-@@ -330,6 +391,25 @@
- status = "okay";
- };
-
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
-+ status = "okay";
-+
-+ bluetooth {
-+ compatible = "brcm,bcm4345c5";
-+ clocks = <&rk817 1>;
-+ clock-names = "lpo";
-+ device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
-+ host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
-+ reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
-+ vbat-supply = <&vcc_3v3>;
-+ vddio-supply = <&vcc_1v8>;
-+ };
-+};
-+
- &usb2phy0 {
- status = "okay";
- };
+++ /dev/null
-From 477ed3ade6a46e445b4e2348b710c51df4f6f4b1 Mon Sep 17 00:00:00 2001
-From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
-Date: Thu, 23 Feb 2023 19:29:29 +0530
-Subject: [PATCH] arm64: dts: rockchip: Enable USB OTG for rk3566 Radxa CM3
-
-Enable USB OTG support for Radxa Compute Module 3 IO Board
-
-Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230223135929.630787-1-abbaraju.manojsai@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-@@ -254,6 +254,14 @@
- status = "okay";
- };
-
-+&usb2phy0_otg {
-+ status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+ status = "okay";
-+};
-+
- &vop {
- assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
- assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+++ /dev/null
-From 8f19828844f20b22182719cf53be64f8c955aee8 Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Mon, 23 Jan 2023 12:46:50 +0530
-Subject: [PATCH] arm64: dts: rockchip: Fix compatible for Radxa CM3
-
-The compatible string "radxa,radxa-cm3" referring the product name
-as "Radxa Radxa CM3" but the actual product name is "Radxa CM3".
-
-Fix the compatible strings.
-
-Fixes: 24a28d3eb07d ("dt-bindings: arm: rockchip: Add Radxa Compute Module 3")
-Fixes: 7469ab529bca ("arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3")
-Fixes: 096ebfb74b19 ("arm64: dts: rockchip: Add Radxa Compute Module 3 IO board")
-Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20230123071654.73139-1-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 2 +-
- arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-@@ -11,7 +11,7 @@
-
- / {
- model = "Radxa Compute Module 3(CM3) IO Board";
-- compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
-+ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
-
- aliases {
- mmc1 = &sdmmc0;
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-@@ -8,7 +8,7 @@
- #include <dt-bindings/leds/common.h>
-
- / {
-- compatible = "radxa,radxa-cm3", "rockchip,rk3566";
-+ compatible = "radxa,cm3", "rockchip,rk3566";
-
- aliases {
- mmc0 = &sdhci;
+++ /dev/null
-From f99a75f11f46a24dabb33e90893eebf61dca0566 Mon Sep 17 00:00:00 2001
-From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Date: Sun, 2 Jul 2023 20:52:42 +0200
-Subject: [PATCH] arm64: dts: rockchip: minor whitespace cleanup around '='
-
-The DTS code coding style expects exactly one space before and after '='
-sign.
-
-Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20230702185242.44421-1-krzysztof.kozlowski@linaro.org
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 4 ++--
- 1 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-@@ -137,8 +137,8 @@
-
- &mdio1 {
- rgmii_phy1: ethernet-phy@0 {
-- compatible="ethernet-phy-ieee802.3-c22";
-- reg= <0x0>;
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <0x0>;
- };
- };
-
+++ /dev/null
-From 36d9b3ae708e865cdab95692db5a24c5d975383d Mon Sep 17 00:00:00 2001
-From: Dragan Simic <dsimic@manjaro.org>
-Date: Tue, 12 Dec 2023 09:01:39 +0100
-Subject: [PATCH] arm64: dts: rockchip: Add ethernet0 alias to the dts for
- RK3566 boards
-
-Add ethernet0 alias to the board dts files for a few supported RK3566 boards
-that had it missing. Also, remove the ethernet0 alias from one RK3566 SoM
-dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to
-the dependent board dts files, which actually enable the GMAC.
-
-Signed-off-by: Dragan Simic <dsimic@manjaro.org>
-Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 1 +
- 1 files changed, 1 insertions(+), 0 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-@@ -14,6 +14,7 @@
- compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
-
- aliases {
-+ ethernet0 = &gmac1;
- mmc1 = &sdmmc0;
- };
-
+++ /dev/null
-From 2bf2f4d9f673013a58109626b87329310537a611 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Fri, 9 Dec 2022 18:25:24 +0800
-Subject: [PATCH] arm64: dts: rockchip: Add Radxa CM3I E25
-
-Radxa E25 is a network application carrier board for the Radxa CM3
-Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC.
-
-It has the following features:
-
-- MicroSD card socket, on board eMMC flash
-- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
-- 1x USB Type-C port (Power and Serial console)
-- 1x USB 3.0 OTG port
-- mini PCIe socket (USB or PCIe)
-- ngff PCIe socket (USB or SATA)
-- 1x User LED and 16x RGB LEDs
-- 26-pin expansion header
-
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
-Link: https://lore.kernel.org/r/20221209102524.129367-3-amadeus@jmu.edu.cn
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/Makefile | 1 +
- .../boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 416 ++++++++++++++++++
- .../boot/dts/rockchip/rk3568-radxa-e25.dts | 229 ++++++++++
- 3 files changed, 646 insertions(+)
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
- create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-
---- a/arch/arm64/boot/dts/rockchip/Makefile
-+++ b/arch/arm64/boot/dts/rockchip/Makefile
-@@ -78,4 +78,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bp
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
-+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
- dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
-@@ -0,0 +1,416 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/leds/common.h>
-+#include <dt-bindings/pinctrl/rockchip.h>
-+#include "rk3568.dtsi"
-+
-+/ {
-+ model = "Radxa CM3 Industrial Board";
-+ compatible = "radxa,cm3i", "rockchip,rk3568";
-+
-+ aliases {
-+ mmc0 = &sdhci;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial2:115200n8";
-+ };
-+
-+ gpio-leds {
-+ compatible = "gpio-leds";
-+
-+ led_user: led-0 {
-+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
-+ function = LED_FUNCTION_HEARTBEAT;
-+ color = <LED_COLOR_ID_GREEN>;
-+ linux,default-trigger = "heartbeat";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_user_en>;
-+ };
-+ };
-+
-+ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "pcie30_avdd0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "pcie30_avdd1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ vin-supply = <&vcc3v3_sys>;
-+ };
-+
-+ vcc3v3_sys: vcc3v3-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc3v3_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc5v_input>;
-+ };
-+
-+ vcc5v0_sys: vcc5v0-sys-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc5v0_sys";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v_input>;
-+ };
-+
-+ /* labeled +5v_input in schematic */
-+ vcc5v_input: vcc5v-input-regulator {
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc5v_input";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ };
-+};
-+
-+&combphy0 {
-+ status = "okay";
-+};
-+
-+&combphy1 {
-+ status = "okay";
-+};
-+
-+&combphy2 {
-+ status = "okay";
-+};
-+
-+&cpu0 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu1 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu2 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&cpu3 {
-+ cpu-supply = <&vdd_cpu>;
-+};
-+
-+&display_subsystem {
-+ status = "disabled";
-+};
-+
-+&gpu {
-+ mali-supply = <&vdd_gpu>;
-+ status = "okay";
-+};
-+
-+&i2c0 {
-+ status = "okay";
-+
-+ vdd_cpu: regulator@1c {
-+ compatible = "tcs,tcs4525";
-+ reg = <0x1c>;
-+ fcs,suspend-voltage-selector = <1>;
-+ regulator-name = "vdd_cpu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <800000>;
-+ regulator-max-microvolt = <1150000>;
-+ regulator-ramp-delay = <2300>;
-+ vin-supply = <&vcc5v_input>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ rk809: pmic@20 {
-+ compatible = "rockchip,rk809";
-+ reg = <0x20>;
-+ interrupt-parent = <&gpio0>;
-+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
-+ #clock-cells = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pmic_int>;
-+ rockchip,system-power-controller;
-+ wakeup-source;
-+
-+ vcc1-supply = <&vcc3v3_sys>;
-+ vcc2-supply = <&vcc3v3_sys>;
-+ vcc3-supply = <&vcc3v3_sys>;
-+ vcc4-supply = <&vcc3v3_sys>;
-+ vcc5-supply = <&vcc3v3_sys>;
-+ vcc6-supply = <&vcc3v3_sys>;
-+ vcc7-supply = <&vcc3v3_sys>;
-+ vcc8-supply = <&vcc3v3_sys>;
-+ vcc9-supply = <&vcc3v3_sys>;
-+
-+ regulators {
-+ vdd_logic: DCDC_REG1 {
-+ regulator-name = "vdd_logic";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdd_gpu: DCDC_REG2 {
-+ regulator-name = "vdd_gpu";
-+ regulator-always-on;
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_ddr: DCDC_REG3 {
-+ regulator-name = "vcc_ddr";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-initial-mode = <0x2>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ };
-+ };
-+
-+ vdd_npu: DCDC_REG4 {
-+ regulator-name = "vdd_npu";
-+ regulator-init-microvolt = <900000>;
-+ regulator-initial-mode = <0x2>;
-+ regulator-min-microvolt = <500000>;
-+ regulator-max-microvolt = <1350000>;
-+ regulator-ramp-delay = <6001>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_1v8: DCDC_REG5 {
-+ regulator-name = "vcc_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda0v9_image: LDO_REG1 {
-+ regulator-name = "vdda0v9_image";
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda_0v9: LDO_REG2 {
-+ regulator-name = "vdda_0v9";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vdda0v9_pmu: LDO_REG3 {
-+ regulator-name = "vdda0v9_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <900000>;
-+ regulator-max-microvolt = <900000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <900000>;
-+ };
-+ };
-+
-+ vccio_acodec: LDO_REG4 {
-+ regulator-name = "vccio_acodec";
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vccio_sd: LDO_REG5 {
-+ regulator-name = "vccio_sd";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_pmu: LDO_REG6 {
-+ regulator-name = "vcc3v3_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <3300000>;
-+ };
-+ };
-+
-+ vcca_1v8: LDO_REG7 {
-+ regulator-name = "vcca_1v8";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcca1v8_pmu: LDO_REG8 {
-+ regulator-name = "vcca1v8_pmu";
-+ regulator-always-on;
-+ regulator-boot-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-on-in-suspend;
-+ regulator-suspend-microvolt = <1800000>;
-+ };
-+ };
-+
-+ vcca1v8_image: LDO_REG9 {
-+ regulator-name = "vcca1v8_image";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc_3v3: SWITCH_REG1 {
-+ regulator-name = "vcc_3v3";
-+ regulator-always-on;
-+ regulator-boot-on;
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+
-+ vcc3v3_sd: SWITCH_REG2 {
-+ regulator-name = "vcc3v3_sd";
-+
-+ regulator-state-mem {
-+ regulator-off-in-suspend;
-+ };
-+ };
-+ };
-+ };
-+};
-+
-+&pinctrl {
-+ leds {
-+ led_user_en: led_user_en {
-+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ pmic {
-+ pmic_int: pmic_int {
-+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
-+ };
-+ };
-+};
-+
-+&pmu_io_domains {
-+ pmuio1-supply = <&vcc3v3_pmu>;
-+ pmuio2-supply = <&vcc3v3_pmu>;
-+ vccio1-supply = <&vccio_acodec>;
-+ vccio2-supply = <&vcc_1v8>;
-+ vccio3-supply = <&vccio_sd>;
-+ vccio4-supply = <&vcc_1v8>;
-+ vccio5-supply = <&vcc_3v3>;
-+ vccio6-supply = <&vcc_1v8>;
-+ vccio7-supply = <&vcc_3v3>;
-+ status = "okay";
-+};
-+
-+&saradc {
-+ vref-supply = <&vcca_1v8>;
-+ status = "okay";
-+};
-+
-+&sdhci {
-+ bus-width = <8>;
-+ max-frequency = <200000000>;
-+ non-removable;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
-+ vmmc-supply = <&vcc_3v3>;
-+ vqmmc-supply = <&vcc_1v8>;
-+ status = "okay";
-+};
-+
-+&tsadc {
-+ rockchip,hw-tshut-mode = <1>;
-+ rockchip,hw-tshut-polarity = <0>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ status = "okay";
-+};
-+
-+&usb2phy0 {
-+ status = "okay";
-+};
-+
-+&usb2phy1 {
-+ status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+ extcon = <&usb2phy0>;
-+};
---- /dev/null
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -0,0 +1,229 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+
-+/dts-v1/;
-+#include "rk3568-radxa-cm3i.dtsi"
-+
-+/ {
-+ model = "Radxa E25";
-+ compatible = "radxa,e25", "rockchip,rk3568";
-+
-+ aliases {
-+ mmc0 = &sdmmc0;
-+ mmc1 = &sdhci;
-+ };
-+
-+ pwm-leds {
-+ compatible = "pwm-leds-multicolor";
-+
-+ multi-led {
-+ color = <LED_COLOR_ID_RGB>;
-+ max-brightness = <255>;
-+
-+ led-red {
-+ color = <LED_COLOR_ID_RED>;
-+ pwms = <&pwm1 0 1000000 0>;
-+ };
-+
-+ led-green {
-+ color = <LED_COLOR_ID_GREEN>;
-+ pwms = <&pwm2 0 1000000 0>;
-+ };
-+
-+ led-blue {
-+ color = <LED_COLOR_ID_BLUE>;
-+ pwms = <&pwm12 0 1000000 0>;
-+ };
-+ };
-+ };
-+
-+ vbus_typec: vbus-typec-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&vbus_typec_en>;
-+ regulator-name = "vbus_typec";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_sys>;
-+ };
-+
-+ vcc3v3_minipcie: vcc3v3-minipcie-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&minipcie_enable_h>;
-+ regulator-name = "vcc3v3_minipcie";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <&vcc5v0_sys>;
-+ };
-+
-+ vcc3v3_ngff: vcc3v3-ngff-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ngffpcie_enable_h>;
-+ regulator-name = "vcc3v3_ngff";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc5v0_sys>;
-+ };
-+
-+ /* actually fed by vcc5v0_sys, dependent
-+ * on pi6c clock generator
-+ */
-+ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie30x1_enable_h>;
-+ regulator-name = "vcc3v3_pcie30x1";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc3v3_pi6c_05>;
-+ };
-+
-+ vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
-+ compatible = "regulator-fixed";
-+ enable-active-high;
-+ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie_enable_h>;
-+ regulator-name = "vcc3v3_pcie";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc5v0_sys>;
-+ };
-+};
-+
-+&pcie2x1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie20_reset_h>;
-+ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
-+ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
-+ status = "okay";
-+};
-+
-+&pcie30phy {
-+ data-lanes = <1 2>;
-+ status = "okay";
-+};
-+
-+&pcie3x1 {
-+ num-lanes = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie30x1m0_pins>;
-+ reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
-+ vpcie3v3-supply = <&vcc3v3_pcie30x1>;
-+ status = "okay";
-+};
-+
-+&pcie3x2 {
-+ num-lanes = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pcie30x2_reset_h>;
-+ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
-+ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
-+ status = "okay";
-+};
-+
-+&pinctrl {
-+ pcie {
-+ pcie20_reset_h: pcie20-reset-h {
-+ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ pcie30x1_enable_h: pcie30x1-enable-h {
-+ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ pcie30x2_reset_h: pcie30x2-reset-h {
-+ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ pcie_enable_h: pcie-enable-h {
-+ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+
-+ usb {
-+ minipcie_enable_h: minipcie-enable-h {
-+ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ ngffpcie_enable_h: ngffpcie-enable-h {
-+ rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+
-+ vbus_typec_en: vbus_typec_en {
-+ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
-+ };
-+ };
-+};
-+
-+&pwm1 {
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ status = "okay";
-+};
-+
-+&pwm12 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pwm12m1_pins>;
-+ status = "okay";
-+};
-+
-+&sdmmc0 {
-+ bus-width = <4>;
-+ cap-sd-highspeed;
-+ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
-+ /* Also used in pcie30x1_clkreqnm0 */
-+ disable-wp;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
-+ sd-uhs-sdr104;
-+ vmmc-supply = <&vcc3v3_sd>;
-+ vqmmc-supply = <&vccio_sd>;
-+ status = "okay";
-+};
-+
-+&usb_host0_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host0_ohci {
-+ status = "okay";
-+};
-+
-+&usb_host0_xhci {
-+ status = "okay";
-+};
-+
-+&usb_host1_ehci {
-+ status = "okay";
-+};
-+
-+&usb_host1_ohci {
-+ status = "okay";
-+};
-+
-+&usb2phy0_otg {
-+ phy-supply = <&vbus_typec>;
-+ status = "okay";
-+};
-+
-+&usb2phy1_host {
-+ phy-supply = <&vcc3v3_minipcie>;
-+ status = "okay";
-+};
-+
-+&usb2phy1_otg {
-+ phy-supply = <&vcc3v3_ngff>;
-+ status = "okay";
-+};
+++ /dev/null
-From c80992abd2877590059e9cb254213c16824e2106 Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Wed, 18 Jan 2023 13:34:53 +0530
-Subject: [PATCH] arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM
- boards
-
-Radxa has produced Compute Modules like RK3399pro VMARC and CM3i with
-onboarding eMMC flash, so the eMMC is the primary MMC device.
-
-On the other hand, Rockchip boot orders start from eMMC from an MMC
-device perspective.
-
-Mark, the eMMC has mmc0 to satisfy the above two conditions.
-
-Reported-by: FUKAUMI Naoki <naoki@radxa.com>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230118080454.11643-1-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 4 ++--
- arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 3 +--
- 2 files changed, 3 insertions(+), 4 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
-@@ -13,8 +13,8 @@
- compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
-
- aliases {
-- mmc0 = &sdmmc;
-- mmc1 = &sdhci;
-+ mmc0 = &sdhci;
-+ mmc1 = &sdmmc;
- };
-
- vcc3v3_pcie: vcc-pcie-regulator {
---- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -8,8 +8,7 @@
- compatible = "radxa,e25", "rockchip,rk3568";
-
- aliases {
-- mmc0 = &sdmmc0;
-- mmc1 = &sdhci;
-+ mmc1 = &sdmmc0;
- };
-
- pwm-leds {
+++ /dev/null
-From c4d2b02d63ee38b381fbc886c02eecfec4f981cc Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Mon, 23 Jan 2023 12:46:51 +0530
-Subject: [PATCH] arm64: dts: rockchip: Add missing CM3i fallback compatible
- for Radxa E25
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-In order to function the Radxa E25 Carrier board, it is mandatory to
-mount the Radxa CM3i module.
-
-Add Radxa CM3i compatible as fallback compatible to string to satisfy
-the Module and Carrier board topology.
-
-Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
-Cc: Chukun Pan <amadeus@jmu.edu.cn>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230123071654.73139-2-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -5,7 +5,7 @@
-
- / {
- model = "Radxa E25";
-- compatible = "radxa,e25", "rockchip,rk3568";
-+ compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
-
- aliases {
- mmc1 = &sdmmc0;
+++ /dev/null
-From ef9134d9bbce071c9e4ebdcbb6f8fb1a5dd0a67e Mon Sep 17 00:00:00 2001
-From: Jagan Teki <jagan@amarulasolutions.com>
-Date: Mon, 23 Jan 2023 12:46:53 +0530
-Subject: [PATCH] arm64: dts: rockchip: Correct the model name for Radxa E25
-
-Radxa E25 is a Carrier board, so update the model name for Radxa E25
-as suggested by the Radxa website.
-
-Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
-Cc: Chukun Pan <amadeus@jmu.edu.cn>
-Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
-Link: https://lore.kernel.org/r/20230123071654.73139-4-jagan@amarulasolutions.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -4,7 +4,7 @@
- #include "rk3568-radxa-cm3i.dtsi"
-
- / {
-- model = "Radxa E25";
-+ model = "Radxa E25 Carrier Board";
- compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
-
- aliases {
+++ /dev/null
-From a87852e37f782257ebc57cc44a0d3fbf806471f6 Mon Sep 17 00:00:00 2001
-From: Jonas Karlman <jonas@kwiboo.se>
-Date: Mon, 24 Jul 2023 14:52:16 +0000
-Subject: [PATCH] arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
-
-Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
-pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
-seen on page 8 of the schematic [1].
-
-pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
-vcc3v3_minipcie regulator is instead related to pcie30x1.
-
-The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
-
-Use correct regulator vcc3v3_minipcie for pcie30x1.
-
-[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf
-
-Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
-Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
-Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- .../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++--------
- 1 file changed, 8 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -47,6 +47,9 @@
- vin-supply = <&vcc5v0_sys>;
- };
-
-+ /* actually fed by vcc5v0_sys, dependent
-+ * on pi6c clock generator
-+ */
- vcc3v3_minipcie: vcc3v3-minipcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
-@@ -54,9 +57,9 @@
- pinctrl-names = "default";
- pinctrl-0 = <&minipcie_enable_h>;
- regulator-name = "vcc3v3_minipcie";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- vin-supply = <&vcc5v0_sys>;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc3v3_pi6c_05>;
- };
-
- vcc3v3_ngff: vcc3v3-ngff-regulator {
-@@ -71,9 +74,6 @@
- vin-supply = <&vcc5v0_sys>;
- };
-
-- /* actually fed by vcc5v0_sys, dependent
-- * on pi6c clock generator
-- */
- vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
-@@ -83,7 +83,7 @@
- regulator-name = "vcc3v3_pcie30x1";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-- vin-supply = <&vcc3v3_pi6c_05>;
-+ vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
-@@ -117,7 +117,7 @@
- pinctrl-names = "default";
- pinctrl-0 = <&pcie30x1m0_pins>;
- reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
-- vpcie3v3-supply = <&vcc3v3_pcie30x1>;
-+ vpcie3v3-supply = <&vcc3v3_minipcie>;
- status = "okay";
- };
-
+++ /dev/null
-From 2bdfe84fbd57a4ed9fd65a67210442559ce078f0 Mon Sep 17 00:00:00 2001
-From: Jonas Karlman <jonas@kwiboo.se>
-Date: Mon, 24 Jul 2023 14:52:16 +0000
-Subject: [PATCH] arm64: dts: rockchip: Enable SATA on Radxa E25
-
-The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
-
-Enable sata1 node to fix use of SATA drives on the M.2 slot.
-
-Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
-Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
-Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -99,6 +99,10 @@
- };
- };
-
-+&combphy1 {
-+ phy-supply = <&vcc3v3_pcie30x1>;
-+};
-+
- &pcie2x1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pcie20_reset_h>;
-@@ -178,6 +182,10 @@
- status = "okay";
- };
-
-+&sata1 {
-+ status = "okay";
-+};
-+
- &sdmmc0 {
- bus-width = <4>;
- cap-sd-highspeed;
+++ /dev/null
-From 437644753208092f642b7669c69da606aa07dfb4 Mon Sep 17 00:00:00 2001
-From: Tim Lunn <tim@feathertop.org>
-Date: Wed, 14 Feb 2024 15:07:30 +1100
-Subject: [PATCH] arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
-
-Adjust compatible string to match the board vendor of Sinovoip
-
-Signed-off-by: Tim Lunn <tim@feathertop.org>
-Reviewed-by: Dragan Simic <dsimic@manjaro.org>
-Acked-by: Conor Dooley <conor.dooley@microchip.com>
-Link: https://lore.kernel.org/r/20240214040731.3069111-4-tim@feathertop.org
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
-@@ -13,7 +13,7 @@
-
- / {
- model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
-- compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
-+ compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568";
-
- aliases {
- ethernet0 = &gmac0;
+++ /dev/null
-From a2ac2a1b02590a22a236c43c455f421cdede45f5 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
-Date: Thu, 14 Mar 2024 15:24:35 +0300
-Subject: [PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to
- 0x1f
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
-findings that support this. There's no bootstrapping option to change the
-PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
-address of the switch. So the reg property on the device tree is currently
-ignored by the Linux driver.
-
-Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
-has this switch.
-
-Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
-Fixes: c1804463e5c6 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")
-Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@arinc9.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
-@@ -521,9 +521,9 @@
- #address-cells = <1>;
- #size-cells = <0>;
-
-- switch@0 {
-+ switch@1f {
- compatible = "mediatek,mt7531";
-- reg = <0>;
-+ reg = <0x1f>;
-
- ports {
- #address-cells = <1>;
+++ /dev/null
-From 433d54818f64a2fe0562f8c04c7a81f562368515 Mon Sep 17 00:00:00 2001
-From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
-Date: Tue, 5 Mar 2024 15:32:18 +0100
-Subject: [PATCH] arm64: dts: rockchip: regulator for sd needs to be always on
- for BPI-R2Pro
-
-With default dts configuration for BPI-R2Pro, the regulator for sd card is
-powered off when reboot is commanded, and the only solution to detect the
-sd card again, and therefore, allow rebooting from there, is to do a
-hardware reset.
-
-Configure the regulator for sd to be always on for BPI-R2Pro in order to
-avoid this issue.
-
-Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
-Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
-Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
-Signed-off-by: Heiko Stuebner <heiko@sntech.de>
----
- arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
-@@ -412,6 +412,8 @@
-
- vccio_sd: LDO_REG5 {
- regulator-name = "vccio_sd";
-+ regulator-always-on;
-+ regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
-
+++ /dev/null
-From 6731d2c9039fbe1ecf21915eab3acee0a999508a Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Fri, 10 Jul 2020 21:38:20 +0200
-Subject: [PATCH] rockchip: use system LED for OpenWrt
-
-Use the SYS LED on the casing for showing system status.
-
-This patch is kept separate from the NanoPi R2S support patch, as i plan
-on submitting the device support upstream.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 9 ++++++++-
- 1 file changed, 8 insertions(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -6,6 +6,7 @@
- /dts-v1/;
-
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/leds/common.h>
- #include <dt-bindings/gpio/gpio.h>
- #include "rk3328.dtsi"
-
-@@ -16,6 +17,11 @@
- aliases {
- ethernet1 = &rtl8153;
- mmc0 = &sdmmc;
-+
-+ led-boot = &sys_led;
-+ led-failsafe = &sys_led;
-+ led-running = &sys_led;
-+ led-upgrade = &sys_led;
- };
-
- chosen {
-@@ -48,19 +54,22 @@
- pinctrl-names = "default";
-
- lan_led: led-0 {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_LAN;
- gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
-- label = "nanopi-r2s:green:lan";
- };
-
- sys_led: led-1 {
-+ color = <LED_COLOR_ID_RED>;
-+ function = LED_FUNCTION_STATUS;
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-- label = "nanopi-r2s:red:sys";
- default-state = "on";
- };
-
- wan_led: led-2 {
-+ color = <LED_COLOR_ID_GREEN>;
-+ function = LED_FUNCTION_WAN;
- gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
-- label = "nanopi-r2s:green:wan";
- };
- };
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
-@@ -13,6 +13,11 @@
- aliases {
- mmc0 = &sdmmc;
- mmc1 = &emmc;
-+
-+ led-boot = &power_led;
-+ led-failsafe = &power_led;
-+ led-running = &power_led;
-+ led-upgrade = &power_led;
- };
-
- chosen {
+++ /dev/null
-From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 13:32:59 +0200
-Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S
-
-This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
-NanoPi R2S. Add the correct value for the RTL8153 LED configuration
-register to match the blink behavior of the other port on the device.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
- 1 file changed, 1 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -406,6 +406,7 @@
- rtl8153: device@2 {
- compatible = "usbbda,8153";
- reg = <2>;
-+ realtek,led-data = <0x87>;
- };
- };
-
+++ /dev/null
-From: David Bauer <mail@david-bauer.net>
-Subject: arm64: dts: rockchip: disable UHS modes for NanoPi R4S
-
-The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting
-while U-Boot requires the card to be in 3.3V mode.
-
-Remove UHS support from the SD controller so the card remains in 3.3V
-mode. This reduces transfer speeds but ensures a reboot whether from
-userspace or following a kernel panic is always working.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
-@@ -335,7 +335,6 @@
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
-- sd-uhs-sdr104;
- vmmc-supply = <&vcc_sd>;
- vqmmc-supply = <&vcc_sdio>;
- status = "okay";
---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -112,6 +112,11 @@
- status = "disabled";
- };
-
-+&sdmmc {
-+ /delete-property/ sd-uhs-sdr104;
-+ cap-sd-highspeed;
-+};
-+
- &u2phy0_host {
- phy-supply = <&vdd_5v>;
- };
+++ /dev/null
---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
-@@ -19,6 +19,13 @@
- model = "FriendlyElec NanoPi R4S";
- compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
-
-+ aliases {
-+ led-boot = &sys_led;
-+ led-failsafe = &sys_led;
-+ led-running = &sys_led;
-+ led-upgrade = &sys_led;
-+ };
-+
- /delete-node/ display-subsystem;
-
- gpio-leds {
+++ /dev/null
-From d2166e3b3680bd2b206aebf1e1ce4c0d346f3c50 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Fri, 19 May 2023 12:10:52 +0800
-Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Orange Pi R1
- Plus
-
-Add OpenWrt's LED aliases for showing system status.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
----
- .../dts/rockchip/rk3328-orangepi-r1-plus.dts | 17 +++++++++--------
- 1 file changed, 9 insertions(+), 8 deletions(-)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
-@@ -17,6 +17,11 @@
- aliases {
- ethernet1 = &rtl8153;
- mmc0 = &sdmmc;
-+
-+ led-boot = &status_led;
-+ led-failsafe = &status_led;
-+ led-running = &status_led;
-+ led-upgrade = &status_led;
- };
-
- chosen {
-@@ -41,11 +46,10 @@
- gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
- };
-
-- led-1 {
-+ status_led: led-1 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_RED>;
- gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
-- linux,default-trigger = "heartbeat";
- };
-
- led-2 {
+++ /dev/null
-From b46a530d12ada422b9d5b2b97059e0d3ed950b40 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Fri, 19 May 2023 12:38:04 +0800
-Subject: [PATCH] arm64: dts: rockchip: add LED configuration to Orange Pi R1
- Plus
-
-Add the correct value for the RTL8153 LED configuration register to
-match the blink behavior of the other port on the device.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
----
- arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
-@@ -365,6 +365,7 @@
- rtl8153: device@2 {
- compatible = "usbbda,8153";
- reg = <2>;
-+ realtek,led-data = <0x87>;
- };
- };
-
+++ /dev/null
---- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
-@@ -15,6 +15,13 @@
- model = "FriendlyElec NanoPC-T4";
- compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
-
-+ aliases {
-+ led-boot = &status_led;
-+ led-failsafe = &status_led;
-+ led-running = &status_led;
-+ led-upgrade = &status_led;
-+ };
-+
- vcc12v0_sys: vcc12v0-sys {
- compatible = "regulator-fixed";
- regulator-always-on;
+++ /dev/null
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Tianling Shen <cnsztl@gmail.com>
-Date: Tue Jun 20 16:45:27 2023 +0800
-Subject: [PATCH] arm64: dts: rockchip: Update LED properties for NanoPi R5
- series
-
-Add OpenWrt's LED aliases for showing system status.
-
-Signed-off-by: Tianling Shen <cnsztl@gmail.com>
----
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
-@@ -40,7 +40,6 @@
- power_led: led-power {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_POWER;
-- linux,default-trigger = "heartbeat";
- gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
- };
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
-@@ -39,7 +39,6 @@
- power_led: led-power {
- color = <LED_COLOR_ID_RED>;
- function = LED_FUNCTION_POWER;
-- linux,default-trigger = "heartbeat";
- gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
- };
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
-@@ -18,6 +18,11 @@
- aliases {
- mmc0 = &sdmmc0;
- mmc1 = &sdhci;
-+
-+ led-boot = &power_led;
-+ led-failsafe = &power_led;
-+ led-running = &power_led;
-+ led-upgrade = &power_led;
- };
-
- chosen: chosen {
+++ /dev/null
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Marius Durbaca <mariusd84@gmail.com>
-Date: Tue Feb 20 15:05:27 2024 +0200
-Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa
-CM3 IO board
-
-Add OpenWrt's LED aliases for showing system status.
-
-Suggested-by: Tianling Shen <cnsztl@immortalwrt.org>
-Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
----
-
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
-@@ -16,6 +16,10 @@
- aliases {
- ethernet0 = &gmac1;
- mmc1 = &sdmmc0;
-+ led-boot = &status_led;
-+ led-failsafe = &status_led;
-+ led-running = &status_led;
-+ led-upgrade = &status_led;
- };
-
- chosen: chosen {
---- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
-@@ -17,7 +17,7 @@
- leds {
- compatible = "gpio-leds";
-
-- led-0 {
-+ status_led: led-0 {
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
- color = <LED_COLOR_ID_GREEN>;
- function = LED_FUNCTION_STATUS;
+++ /dev/null
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Marius Durbaca <mariusd84@gmail.com>
-Date: Tue Feb 27 16:25:27 2024 +0200
-Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa
-E25
-
-Add OpenWrt's LED aliases for showing system status.
-
-Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
----
-
---- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-+++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
-@@ -9,6 +9,10 @@
-
- aliases {
- mmc1 = &sdmmc0;
-+ led-boot = &led_user;
-+ led-failsafe = &led_user;
-+ led-running = &led_user;
-+ led-upgrade = &led_user;
- };
-
- pwm-leds {
+++ /dev/null
-From patchwork Sat Nov 12 14:10:58 2022
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Aurelien Jarno <aurelien@aurel32.net>
-X-Patchwork-Id: 13041222
-Return-Path:
- <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org>
-X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
- aws-us-west-2-korg-lkml-1.web.codeaurora.org
-From: Aurelien Jarno <aurelien@aurel32.net>
-To: Olivia Mackall <olivia@selenic.com>,
- Herbert Xu <herbert@gondor.apana.org.au>,
- Rob Herring <robh+dt@kernel.org>,
- Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
- Heiko Stuebner <heiko@sntech.de>,
- Philipp Zabel <p.zabel@pengutronix.de>,
- Lin Jinhan <troy.lin@rock-chips.com>
-Cc: linux-crypto@vger.kernel.org (open list:HARDWARE RANDOM NUMBER GENERATOR
- CORE),
- devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE
- BINDINGS),
- linux-arm-kernel@lists.infradead.org (moderated list:ARM/Rockchip SoC
- support),
- linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC support),
- linux-kernel@vger.kernel.org (open list),
- Aurelien Jarno <aurelien@aurel32.net>
-Subject: [PATCH v1 2/3] hwrng: add Rockchip SoC hwrng driver
-Date: Sat, 12 Nov 2022 15:10:58 +0100
-Message-Id: <20221112141059.3802506-3-aurelien@aurel32.net>
-In-Reply-To: <20221112141059.3802506-1-aurelien@aurel32.net>
-References: <20221112141059.3802506-1-aurelien@aurel32.net>
-MIME-Version: 1.0
-List-Id: <linux-arm-kernel.lists.infradead.org>
-
-Rockchip SoCs used to have a random number generator as part of their
-crypto device, and support for it has to be added to the corresponding
-driver. However newer Rockchip SoCs like the RK356x have an independent
-True Random Number Generator device. This patch adds a driver for it,
-greatly inspired from the downstream driver.
-
-The TRNG device does not seem to have a signal conditionner and the FIPS
-140-2 test returns a lot of failures. They can be reduced by increasing
-RK_RNG_SAMPLE_CNT, in a tradeoff between quality and speed. This value
-has been adjusted to get ~90% of successes and the quality value has
-been set accordingly.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
----
- drivers/char/hw_random/Kconfig | 14 ++
- drivers/char/hw_random/Makefile | 1 +
- drivers/char/hw_random/rockchip-rng.c | 251 ++++++++++++++++++++++++++
- 3 files changed, 266 insertions(+)
- create mode 100644 drivers/char/hw_random/rockchip-rng.c
-
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -549,6 +549,20 @@ config HW_RANDOM_CN10K
- To compile this driver as a module, choose M here.
- The module will be called cn10k_rng. If unsure, say Y.
-
-+config HW_RANDOM_ROCKCHIP
-+ tristate "Rockchip True Random Number Generator"
-+ depends on HW_RANDOM && (ARCH_ROCKCHIP || COMPILE_TEST)
-+ depends on HAS_IOMEM
-+ default HW_RANDOM
-+ help
-+ This driver provides kernel-side support for the True Random Number
-+ Generator hardware found on some Rockchip SoC like RK3566 or RK3568.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called rockchip-rng.
-+
-+ If unsure, say Y.
-+
- endif # HW_RANDOM
-
- config UML_RANDOM
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -47,3 +47,4 @@ obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphe
- obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
- obj-$(CONFIG_HW_RANDOM_CN10K) += cn10k-rng.o
- obj-$(CONFIG_HW_RANDOM_POLARFIRE_SOC) += mpfs-rng.o
-+obj-$(CONFIG_HW_RANDOM_ROCKCHIP) += rockchip-rng.o
---- /dev/null
-+++ b/drivers/char/hw_random/rockchip-rng.c
-@@ -0,0 +1,251 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * rockchip-rng.c True Random Number Generator driver for Rockchip SoCs
-+ *
-+ * Copyright (c) 2018, Fuzhou Rockchip Electronics Co., Ltd.
-+ * Copyright (c) 2022, Aurelien Jarno
-+ * Authors:
-+ * Lin Jinhan <troy.lin@rock-chips.com>
-+ * Aurelien Jarno <aurelien@aurel32.net>
-+ */
-+#include <linux/clk.h>
-+#include <linux/hw_random.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of_platform.h>
-+#include <linux/pm_runtime.h>
-+#include <linux/reset.h>
-+#include <linux/slab.h>
-+
-+#define RK_RNG_AUTOSUSPEND_DELAY 100
-+#define RK_RNG_MAX_BYTE 32
-+#define RK_RNG_POLL_PERIOD_US 100
-+#define RK_RNG_POLL_TIMEOUT_US 10000
-+
-+/*
-+ * TRNG collects osc ring output bit every RK_RNG_SAMPLE_CNT time. The value is
-+ * a tradeoff between speed and quality and has been adjusted to get a quality
-+ * of ~900 (~90% of FIPS 140-2 successes).
-+ */
-+#define RK_RNG_SAMPLE_CNT 1000
-+
-+/* TRNG registers from RK3568 TRM-Part2, section 5.4.1 */
-+#define TRNG_RST_CTL 0x0004
-+#define TRNG_RNG_CTL 0x0400
-+#define TRNG_RNG_CTL_LEN_64_BIT (0x00 << 4)
-+#define TRNG_RNG_CTL_LEN_128_BIT (0x01 << 4)
-+#define TRNG_RNG_CTL_LEN_192_BIT (0x02 << 4)
-+#define TRNG_RNG_CTL_LEN_256_BIT (0x03 << 4)
-+#define TRNG_RNG_CTL_OSC_RING_SPEED_0 (0x00 << 2)
-+#define TRNG_RNG_CTL_OSC_RING_SPEED_1 (0x01 << 2)
-+#define TRNG_RNG_CTL_OSC_RING_SPEED_2 (0x02 << 2)
-+#define TRNG_RNG_CTL_OSC_RING_SPEED_3 (0x03 << 2)
-+#define TRNG_RNG_CTL_ENABLE BIT(1)
-+#define TRNG_RNG_CTL_START BIT(0)
-+#define TRNG_RNG_SAMPLE_CNT 0x0404
-+#define TRNG_RNG_DOUT_0 0x0410
-+#define TRNG_RNG_DOUT_1 0x0414
-+#define TRNG_RNG_DOUT_2 0x0418
-+#define TRNG_RNG_DOUT_3 0x041c
-+#define TRNG_RNG_DOUT_4 0x0420
-+#define TRNG_RNG_DOUT_5 0x0424
-+#define TRNG_RNG_DOUT_6 0x0428
-+#define TRNG_RNG_DOUT_7 0x042c
-+
-+struct rk_rng {
-+ struct hwrng rng;
-+ void __iomem *base;
-+ struct reset_control *rst;
-+ int clk_num;
-+ struct clk_bulk_data *clk_bulks;
-+};
-+
-+/* The mask determine the bits that are updated */
-+static void rk_rng_write_ctl(struct rk_rng *rng, u32 val, u32 mask)
-+{
-+ writel_relaxed((mask << 16) | val, rng->base + TRNG_RNG_CTL);
-+}
-+
-+static int rk_rng_init(struct hwrng *rng)
-+{
-+ struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
-+ u32 reg;
-+ int ret;
-+
-+ /* start clocks */
-+ ret = clk_bulk_prepare_enable(rk_rng->clk_num, rk_rng->clk_bulks);
-+ if (ret < 0) {
-+ dev_err((struct device *) rk_rng->rng.priv,
-+ "Failed to enable clks %d\n", ret);
-+ return ret;
-+ }
-+
-+ /* set the sample period */
-+ writel(RK_RNG_SAMPLE_CNT, rk_rng->base + TRNG_RNG_SAMPLE_CNT);
-+
-+ /* set osc ring speed and enable it */
-+ reg = TRNG_RNG_CTL_LEN_256_BIT |
-+ TRNG_RNG_CTL_OSC_RING_SPEED_0 |
-+ TRNG_RNG_CTL_ENABLE;
-+ rk_rng_write_ctl(rk_rng, reg, 0xffff);
-+
-+ return 0;
-+}
-+
-+static void rk_rng_cleanup(struct hwrng *rng)
-+{
-+ struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
-+ u32 reg;
-+
-+ /* stop TRNG */
-+ reg = 0;
-+ rk_rng_write_ctl(rk_rng, reg, 0xffff);
-+
-+ /* stop clocks */
-+ clk_bulk_disable_unprepare(rk_rng->clk_num, rk_rng->clk_bulks);
-+}
-+
-+static int rk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
-+{
-+ struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
-+ u32 reg;
-+ int ret = 0;
-+ int i;
-+
-+ pm_runtime_get_sync((struct device *) rk_rng->rng.priv);
-+
-+ /* Start collecting random data */
-+ reg = TRNG_RNG_CTL_START;
-+ rk_rng_write_ctl(rk_rng, reg, reg);
-+
-+ ret = readl_poll_timeout(rk_rng->base + TRNG_RNG_CTL, reg,
-+ !(reg & TRNG_RNG_CTL_START),
-+ RK_RNG_POLL_PERIOD_US,
-+ RK_RNG_POLL_TIMEOUT_US);
-+ if (ret < 0)
-+ goto out;
-+
-+ /* Read random data stored in big endian in the registers */
-+ ret = min_t(size_t, max, RK_RNG_MAX_BYTE);
-+ for (i = 0; i < ret; i += 4) {
-+ reg = readl_relaxed(rk_rng->base + TRNG_RNG_DOUT_0 + i);
-+ *(u32 *)(buf + i) = be32_to_cpu(reg);
-+ }
-+
-+out:
-+ pm_runtime_mark_last_busy((struct device *) rk_rng->rng.priv);
-+ pm_runtime_put_sync_autosuspend((struct device *) rk_rng->rng.priv);
-+
-+ return ret;
-+}
-+
-+static int rk_rng_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ struct rk_rng *rk_rng;
-+ int ret;
-+
-+ rk_rng = devm_kzalloc(dev, sizeof(struct rk_rng), GFP_KERNEL);
-+ if (!rk_rng)
-+ return -ENOMEM;
-+
-+ rk_rng->base = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(rk_rng->base))
-+ return PTR_ERR(rk_rng->base);
-+
-+ rk_rng->clk_num = devm_clk_bulk_get_all(dev, &rk_rng->clk_bulks);
-+ if (rk_rng->clk_num < 0)
-+ return dev_err_probe(dev, rk_rng->clk_num,
-+ "Failed to get clks property\n");
-+
-+ rk_rng->rst = devm_reset_control_array_get(&pdev->dev, false, false);
-+ if (IS_ERR(rk_rng->rst))
-+ return dev_err_probe(dev, PTR_ERR(rk_rng->rst),
-+ "Failed to get reset property\n");
-+
-+ reset_control_assert(rk_rng->rst);
-+ udelay(2);
-+ reset_control_deassert(rk_rng->rst);
-+
-+ platform_set_drvdata(pdev, rk_rng);
-+
-+ rk_rng->rng.name = dev_driver_string(dev);
-+#ifndef CONFIG_PM
-+ rk_rng->rng.init = rk_rng_init;
-+ rk_rng->rng.cleanup = rk_rng_cleanup;
-+#endif
-+ rk_rng->rng.read = rk_rng_read;
-+ rk_rng->rng.priv = (unsigned long) dev;
-+ rk_rng->rng.quality = 900;
-+
-+ pm_runtime_set_autosuspend_delay(dev, RK_RNG_AUTOSUSPEND_DELAY);
-+ pm_runtime_use_autosuspend(dev);
-+ pm_runtime_enable(dev);
-+
-+ ret = devm_hwrng_register(dev, &rk_rng->rng);
-+ if (ret)
-+ return dev_err_probe(&pdev->dev, ret, "Failed to register Rockchip hwrng\n");
-+
-+ dev_info(&pdev->dev, "Registered Rockchip hwrng\n");
-+
-+ return 0;
-+}
-+
-+static int rk_rng_remove(struct platform_device *pdev)
-+{
-+ pm_runtime_disable(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int rk_rng_runtime_suspend(struct device *dev)
-+{
-+ struct rk_rng *rk_rng = dev_get_drvdata(dev);
-+
-+ rk_rng_cleanup(&rk_rng->rng);
-+
-+ return 0;
-+}
-+
-+static int rk_rng_runtime_resume(struct device *dev)
-+{
-+ struct rk_rng *rk_rng = dev_get_drvdata(dev);
-+
-+ return rk_rng_init(&rk_rng->rng);
-+}
-+#endif
-+
-+static const struct dev_pm_ops rk_rng_pm_ops = {
-+ SET_RUNTIME_PM_OPS(rk_rng_runtime_suspend,
-+ rk_rng_runtime_resume, NULL)
-+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
-+ pm_runtime_force_resume)
-+};
-+
-+static const struct of_device_id rk_rng_dt_match[] = {
-+ {
-+ .compatible = "rockchip,rk3568-rng",
-+ },
-+ {},
-+};
-+
-+MODULE_DEVICE_TABLE(of, rk_rng_dt_match);
-+
-+static struct platform_driver rk_rng_driver = {
-+ .driver = {
-+ .name = "rockchip-rng",
-+ .pm = &rk_rng_pm_ops,
-+ .of_match_table = rk_rng_dt_match,
-+ },
-+ .probe = rk_rng_probe,
-+ .remove = rk_rng_remove,
-+};
-+
-+module_platform_driver(rk_rng_driver);
-+
-+MODULE_DESCRIPTION("Rockchip True Random Number Generator driver");
-+MODULE_AUTHOR("Lin Jinhan <troy.lin@rock-chips.com>, Aurelien Jarno <aurelien@aurel32.net>");
-+MODULE_LICENSE("GPL v2");
+++ /dev/null
-From patchwork Sat Nov 12 14:10:59 2022
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-X-Patchwork-Submitter: Aurelien Jarno <aurelien@aurel32.net>
-X-Patchwork-Id: 13041221
-From: Aurelien Jarno <aurelien@aurel32.net>
-To: Olivia Mackall <olivia@selenic.com>,
- Herbert Xu <herbert@gondor.apana.org.au>,
- Rob Herring <robh+dt@kernel.org>,
- Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
- Heiko Stuebner <heiko@sntech.de>,
- Philipp Zabel <p.zabel@pengutronix.de>,
- Lin Jinhan <troy.lin@rock-chips.com>
-Cc: linux-crypto@vger.kernel.org (open list:HARDWARE RANDOM NUMBER GENERATOR
- CORE),
- devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE
- BINDINGS),
- linux-arm-kernel@lists.infradead.org (moderated list:ARM/Rockchip SoC
- support),
- linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC support),
- linux-kernel@vger.kernel.org (open list),
- Aurelien Jarno <aurelien@aurel32.net>
-Subject: [PATCH v1 3/3] arm64: dts: rockchip: add DT entry for RNG to RK356x
-Date: Sat, 12 Nov 2022 15:10:59 +0100
-Message-Id: <20221112141059.3802506-4-aurelien@aurel32.net>
-In-Reply-To: <20221112141059.3802506-1-aurelien@aurel32.net>
-References: <20221112141059.3802506-1-aurelien@aurel32.net>
-MIME-Version: 1.0
-List-Id: <linux-arm-kernel.lists.infradead.org>
-
-Enable the just added Rockchip RNG driver for RK356x SoCs.
-
-Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
----
- arch/arm64/boot/dts/rockchip/rk356x.dtsi | 9 +++++++++
- 1 file changed, 9 insertions(+)
-
---- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
-+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
-@@ -1773,6 +1773,15 @@
- };
- };
-
-+ rng: rng@fe388000 {
-+ compatible = "rockchip,rk3568-rng";
-+ reg = <0x0 0xfe388000 0x0 0x4000>;
-+ clocks = <&cru CLK_TRNG_NS>, <&cru HCLK_TRNG_NS>;
-+ clock-names = "trng_clk", "trng_hclk";
-+ resets = <&cru SRST_TRNG_NS>;
-+ reset-names = "reset";
-+ };
-+
- pinctrl: pinctrl {
- compatible = "rockchip,rk3568-pinctrl";
- rockchip,grf = <&grf>;
--- /dev/null
+From b75a52b0dda353aeefb4830a320589a363f49579 Mon Sep 17 00:00:00 2001
+From: Shawn Lin <shawn.lin@rock-chips.com>
+Date: Thu, 2 Feb 2023 08:35:16 +0800
+Subject: [PATCH] mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for
+ rockchip platform
+
+For Rockchip platform, DLL bypass bit and start bit need to be set if
+DLL is not locked. And adjust pre-change delay to 0x3 for better signal
+test result.
+
+Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
+Link: https://lore.kernel.org/r/1675298118-64243-2-git-send-email-shawn.lin@rock-chips.com
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+---
+ drivers/mmc/host/sdhci-of-dwcmshc.c | 13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
++++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
+@@ -48,6 +48,7 @@
+ #define DWCMSHC_EMMC_DLL_RXCLK_SRCSEL 29
+ #define DWCMSHC_EMMC_DLL_START_POINT 16
+ #define DWCMSHC_EMMC_DLL_INC 8
++#define DWCMSHC_EMMC_DLL_BYPASS BIT(24)
+ #define DWCMSHC_EMMC_DLL_DLYENA BIT(27)
+ #define DLL_TXCLK_TAPNUM_DEFAULT 0x10
+ #define DLL_TXCLK_TAPNUM_90_DEGREES 0xA
+@@ -60,6 +61,7 @@
+ #define DLL_RXCLK_NO_INVERTER 1
+ #define DLL_RXCLK_INVERTER 0
+ #define DLL_CMDOUT_TAPNUM_90_DEGREES 0x8
++#define DLL_RXCLK_ORI_GATE BIT(31)
+ #define DLL_CMDOUT_TAPNUM_FROM_SW BIT(24)
+ #define DLL_CMDOUT_SRC_CLK_NEG BIT(28)
+ #define DLL_CMDOUT_EN_SRC_CLK_NEG BIT(29)
+@@ -234,9 +236,12 @@ static void dwcmshc_rk3568_set_clock(str
+ sdhci_writel(host, extra, reg);
+
+ if (clock <= 52000000) {
+- /* Disable DLL and reset both of sample and drive clock */
+- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_CTRL);
+- sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_RXCLK);
++ /*
++ * Disable DLL and reset both of sample and drive clock.
++ * The bypass bit and start bit need to be set if DLL is not locked.
++ */
++ sdhci_writel(host, DWCMSHC_EMMC_DLL_BYPASS | DWCMSHC_EMMC_DLL_START, DWCMSHC_EMMC_DLL_CTRL);
++ sdhci_writel(host, DLL_RXCLK_ORI_GATE, DWCMSHC_EMMC_DLL_RXCLK);
+ sdhci_writel(host, 0, DWCMSHC_EMMC_DLL_TXCLK);
+ sdhci_writel(host, 0, DECMSHC_EMMC_DLL_CMDOUT);
+ /*
+@@ -279,7 +284,7 @@ static void dwcmshc_rk3568_set_clock(str
+ }
+
+ extra = 0x1 << 16 | /* tune clock stop en */
+- 0x2 << 17 | /* pre-change delay */
++ 0x3 << 17 | /* pre-change delay */
+ 0x3 << 19; /* post-change delay */
+ sdhci_writel(host, extra, dwc_priv->vendor_specific_area1 + DWCMSHC_EMMC_ATCTRL);
+
--- /dev/null
+From 49502408007b77ff290ce62e6218cefaeedcb31a Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Thu, 9 Mar 2023 17:03:49 -0800
+Subject: [PATCH] mmc: sdhci-of-dwcmshc: properly determine max clock on
+ Rockchip
+
+Currently .get_max_clock returns the current clock rate for cclk_emmc
+on rk35xx, thus max clock gets set to whatever bootloader set it to.
+
+In case of u-boot, it is intentionally reset to 50 MHz if it boots
+from eMMC, see mmc_deinit() in u-boot sources. As a result, HS200 and
+HS400 modes are never selected by Linux, because dwcmshc_rk35xx_postinit
+clears appropriate caps if host->mmc->f_max is < 52MHz
+
+cclk_emmc is not a fixed clock on rk35xx, so using
+sdhci_pltfm_clk_get_max_clock is not appropriate here.
+
+Implement rk35xx_get_max_clock that returns actual max clock for cclk_emmc.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Acked-by: Adrian Hunter <adrian.hunter@intel.com>
+Link: https://lore.kernel.org/r/20230310010349.509132-1-anarsoul@gmail.com
+Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
+---
+ drivers/mmc/host/sdhci-of-dwcmshc.c | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+--- a/drivers/mmc/host/sdhci-of-dwcmshc.c
++++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
+@@ -126,6 +126,13 @@ static unsigned int dwcmshc_get_max_cloc
+ return pltfm_host->clock;
+ }
+
++static unsigned int rk35xx_get_max_clock(struct sdhci_host *host)
++{
++ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
++
++ return clk_round_rate(pltfm_host->clk, ULONG_MAX);
++}
++
+ static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+ {
+@@ -343,7 +350,7 @@ static const struct sdhci_ops sdhci_dwcm
+ .set_clock = dwcmshc_rk3568_set_clock,
+ .set_bus_width = sdhci_set_bus_width,
+ .set_uhs_signaling = dwcmshc_set_uhs_signaling,
+- .get_max_clock = sdhci_pltfm_clk_get_max_clock,
++ .get_max_clock = rk35xx_get_max_clock,
+ .reset = rk35xx_sdhci_reset,
+ .adma_write_desc = dwcmshc_adma_write_desc,
+ };
--- /dev/null
+From 004589ff9df5b75672a78b6c3c4cba93202b14c9 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 25 Mar 2023 15:40:20 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C
+
+The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
+chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230325074022.9818-3-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3328-nanopi-r2c.dts | 40 +++++++++++++++++++
+ 2 files changed, 41 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a9
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c.dts
+@@ -0,0 +1,40 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyarm.com)
++ *
++ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include "rk3328-nanopi-r2s.dts"
++
++/ {
++ model = "FriendlyElec NanoPi R2C";
++ compatible = "friendlyarm,nanopi-r2c", "rockchip,rk3328";
++};
++
++&gmac2io {
++ phy-handle = <&yt8521s>;
++ tx_delay = <0x22>;
++ rx_delay = <0x12>;
++
++ mdio {
++ /delete-node/ ethernet-phy@1;
++
++ yt8521s: ethernet-phy@3 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <3>;
++
++ motorcomm,clk-out-frequency-hz = <125000000>;
++ motorcomm,keep-pll-enabled;
++ motorcomm,auto-sleep-disabled;
++
++ pinctrl-0 = <ð_phy_reset_pin>;
++ pinctrl-names = "default";
++ reset-assert-us = <10000>;
++ reset-deassert-us = <50000>;
++ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
--- /dev/null
+From 51712e1d014aaaa4c6e1e7e84932d58b5c0f59ed Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Sat, 3 Dec 2022 15:41:49 +0800
+Subject: [PATCH] arm64: dts: rockchip: rk3328: Add Orange Pi R1 Plus
+
+Orange Pi R1 Plus is a Rockchip RK3328 based SBC by Xunlong.
+
+This device is similar to the NanoPi R2S, and has a 16MB
+SPI NOR (mx25l12805d). The reset button is changed to
+directly reset the power supply, another detail is that
+both network ports have independent MAC addresses.
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+Link: https://lore.kernel.org/r/20221203074149.11543-3-amadeus@jmu.edu.cn
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../dts/rockchip/rk3328-orangepi-r1-plus.dts | 373 ++++++++++++++++++
+ 2 files changed, 374 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+@@ -0,0 +1,373 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Based on rk3328-nanopi-r2s.dts, which is:
++ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
++ */
++
++/dts-v1/;
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include "rk3328.dtsi"
++
++/ {
++ model = "Xunlong Orange Pi R1 Plus";
++ compatible = "xunlong,orangepi-r1-plus", "rockchip,rk3328";
++
++ aliases {
++ ethernet1 = &rtl8153;
++ mmc0 = &sdmmc;
++ };
++
++ chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ gmac_clk: gmac-clock {
++ compatible = "fixed-clock";
++ clock-frequency = <125000000>;
++ clock-output-names = "gmac_clkin";
++ #clock-cells = <0>;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
++ pinctrl-names = "default";
++
++ led-0 {
++ function = LED_FUNCTION_LAN;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-1 {
++ function = LED_FUNCTION_STATUS;
++ color = <LED_COLOR_ID_RED>;
++ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
++ linux,default-trigger = "heartbeat";
++ };
++
++ led-2 {
++ function = LED_FUNCTION_WAN;
++ color = <LED_COLOR_ID_GREEN>;
++ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ vcc_sd: sdmmc-regulator {
++ compatible = "regulator-fixed";
++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
++ pinctrl-0 = <&sdmmc0m1_pin>;
++ pinctrl-names = "default";
++ regulator-name = "vcc_sd";
++ regulator-boot-on;
++ vin-supply = <&vcc_io>;
++ };
++
++ vcc_sys: vcc-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vdd_5v_lan: vdd-5v-lan-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
++ pinctrl-0 = <&lan_vdd_pin>;
++ pinctrl-names = "default";
++ regulator-name = "vdd_5v_lan";
++ regulator-always-on;
++ regulator-boot-on;
++ vin-supply = <&vcc_sys>;
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_arm>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_arm>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_arm>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_arm>;
++};
++
++&display_subsystem {
++ status = "disabled";
++};
++
++&gmac2io {
++ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
++ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
++ clock_in_out = "input";
++ phy-handle = <&rtl8211e>;
++ phy-mode = "rgmii";
++ phy-supply = <&vcc_io>;
++ pinctrl-0 = <&rgmiim1_pins>;
++ pinctrl-names = "default";
++ snps,aal;
++ rx_delay = <0x18>;
++ tx_delay = <0x24>;
++ status = "okay";
++
++ mdio {
++ compatible = "snps,dwmac-mdio";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ rtl8211e: ethernet-phy@1 {
++ reg = <1>;
++ pinctrl-0 = <ð_phy_reset_pin>;
++ pinctrl-names = "default";
++ reset-assert-us = <10000>;
++ reset-deassert-us = <50000>;
++ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
++
++&i2c1 {
++ status = "okay";
++
++ rk805: pmic@18 {
++ compatible = "rockchip,rk805";
++ reg = <0x18>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
++ #clock-cells = <1>;
++ clock-output-names = "xin32k", "rk805-clkout2";
++ gpio-controller;
++ #gpio-cells = <2>;
++ pinctrl-0 = <&pmic_int_l>;
++ pinctrl-names = "default";
++ rockchip,system-power-controller;
++ wakeup-source;
++
++ vcc1-supply = <&vcc_sys>;
++ vcc2-supply = <&vcc_sys>;
++ vcc3-supply = <&vcc_sys>;
++ vcc4-supply = <&vcc_sys>;
++ vcc5-supply = <&vcc_io>;
++ vcc6-supply = <&vcc_sys>;
++
++ regulators {
++ vdd_log: DCDC_REG1 {
++ regulator-name = "vdd_log";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <712500>;
++ regulator-max-microvolt = <1450000>;
++ regulator-ramp-delay = <12500>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1000000>;
++ };
++ };
++
++ vdd_arm: DCDC_REG2 {
++ regulator-name = "vdd_arm";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <712500>;
++ regulator-max-microvolt = <1450000>;
++ regulator-ramp-delay = <12500>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <950000>;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc_io: DCDC_REG4 {
++ regulator-name = "vcc_io";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcc_18: LDO_REG1 {
++ regulator-name = "vcc_18";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcc18_emmc: LDO_REG2 {
++ regulator-name = "vcc18_emmc";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vdd_10: LDO_REG3 {
++ regulator-name = "vdd_10";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1000000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1000000>;
++ };
++ };
++ };
++ };
++};
++
++&io_domains {
++ pmuio-supply = <&vcc_io>;
++ vccio1-supply = <&vcc_io>;
++ vccio2-supply = <&vcc18_emmc>;
++ vccio3-supply = <&vcc_io>;
++ vccio4-supply = <&vcc_io>;
++ vccio5-supply = <&vcc_io>;
++ vccio6-supply = <&vcc_io>;
++ status = "okay";
++};
++
++&pinctrl {
++ gmac2io {
++ eth_phy_reset_pin: eth-phy-reset-pin {
++ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++ };
++
++ leds {
++ lan_led_pin: lan-led-pin {
++ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ sys_led_pin: sys-led-pin {
++ rockchip,pins = <3 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wan_led_pin: wan-led-pin {
++ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ lan {
++ lan_vdd_pin: lan-vdd-pin {
++ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pmic {
++ pmic_int_l: pmic-int-l {
++ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++};
++
++&pwm2 {
++ status = "okay";
++};
++
++&sdmmc {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ disable-wp;
++ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
++ pinctrl-names = "default";
++ vmmc-supply = <&vcc_sd>;
++ status = "okay";
++};
++
++&spi0 {
++ status = "okay";
++
++ flash@0 {
++ compatible = "jedec,spi-nor";
++ reg = <0>;
++ spi-max-frequency = <50000000>;
++ };
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <0>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
++
++&u2phy {
++ status = "okay";
++};
++
++&u2phy_host {
++ status = "okay";
++};
++
++&u2phy_otg {
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb20_otg {
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usbdrd3 {
++ dr_mode = "host";
++ status = "okay";
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ /* Second port is for USB 3.0 */
++ rtl8153: device@2 {
++ compatible = "usbbda,8153";
++ reg = <2>;
++ };
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
--- /dev/null
+From 387b3bbac5ea6a0a105d685237f033ffe0f184f1 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 25 Mar 2023 15:40:22 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS
+
+The OrangePi R1 Plus LTS is a minor variant of OrangePi R1 Plus with
+the on-board NIC chip changed from rtl8211e to yt8531c, and otherwise
+identical to OrangePi R1 Plus.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230325074022.9818-5-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../rockchip/rk3328-orangepi-r1-plus-lts.dts | 40 +++++++++++++++++++
+ 2 files changed, 41 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-ev
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock-pi-e.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+@@ -0,0 +1,40 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2016 Xunlong Software. Co., Ltd.
++ * (http://www.orangepi.org)
++ *
++ * Copyright (c) 2021-2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include "rk3328-orangepi-r1-plus.dts"
++
++/ {
++ model = "Xunlong Orange Pi R1 Plus LTS";
++ compatible = "xunlong,orangepi-r1-plus-lts", "rockchip,rk3328";
++};
++
++&gmac2io {
++ phy-handle = <&yt8531c>;
++ tx_delay = <0x19>;
++ rx_delay = <0x05>;
++
++ mdio {
++ /delete-node/ ethernet-phy@1;
++
++ yt8531c: ethernet-phy@0 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <0>;
++
++ motorcomm,clk-out-frequency-hz = <125000000>;
++ motorcomm,keep-pll-enabled;
++ motorcomm,auto-sleep-disabled;
++
++ pinctrl-0 = <ð_phy_reset_pin>;
++ pinctrl-names = "default";
++ reset-assert-us = <15000>;
++ reset-deassert-us = <50000>;
++ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++ };
++ };
++};
--- /dev/null
+From c6629b9a6738a64507478527da6c7b83c10a6d2c Mon Sep 17 00:00:00 2001
+From: Vasily Khoruzhick <anarsoul@gmail.com>
+Date: Tue, 7 Mar 2023 22:32:40 -0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyElec Nanopi R5S
+
+FriendlyElec Nanopi R5S is an open-sourced mini IoT gateway device.
+
+Board Specifications
+- Rockchip RK3568
+- 2 or 4GB LPDDR4X
+- 8GB or 16GB eMMC, SD card slot
+- GbE LAN (Native)
+- 2x 2.5G LAN (PCIe)
+- M.2 Connector
+- HDMI 2.0, MIPI DSI/CSI
+- 2xUSB 3.0 Host
+- USB Type C PD, 5V/9V/12V
+- GPIO: 12-pin 0.5mm FPC connector
+
+Based on Tianling Shen's <cnsztl@gmail.com> work.
+
+Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
+Link: https://lore.kernel.org/r/20230308063240.107178-2-anarsoul@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dts | 713 ++++++++++++++++++
+ 2 files changed, 714 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -74,4 +74,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -0,0 +1,713 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++ model = "FriendlyElec NanoPi R5S";
++ compatible = "friendlyarm,nanopi-r5s", "rockchip,rk3568";
++
++ aliases {
++ ethernet0 = &gmac0;
++ mmc0 = &sdmmc0;
++ mmc1 = &sdhci;
++ };
++
++ chosen: chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ hdmi-con {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan1_led_pin>, <&lan2_led_pin>, <&power_led_pin>, <&wan_led_pin>;
++
++ led-lan1 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_LAN;
++ function-enumerator = <1>;
++ gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-lan2 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_LAN;
++ function-enumerator = <2>;
++ gpios = <&gpio3 RK_PD7 GPIO_ACTIVE_HIGH>;
++ };
++
++ power_led: led-power {
++ color = <LED_COLOR_ID_RED>;
++ function = LED_FUNCTION_POWER;
++ linux,default-trigger = "heartbeat";
++ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-wan {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_WAN;
++ gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
++ };
++ };
++
++ vdd_usbc: vdd-usbc-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd_usbc";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc3v3_sys: vcc3v3-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vdd_usbc>;
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vdd_usbc>;
++ };
++
++ vcc3v3_pcie: vcc3v3-pcie-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_pcie";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ enable-active-high;
++ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
++ startup-delay-us = <200000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_usb: vcc5v0-usb-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_usb";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vdd_usbc>;
++ };
++
++ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb_host_en>;
++ regulator-name = "vcc5v0_usb_host";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++
++ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb_otg_en>;
++ regulator-name = "vcc5v0_usb_otg";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++
++ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "pcie30_avdd0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "pcie30_avdd1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++};
++
++&combphy0 {
++ status = "okay";
++};
++
++&combphy1 {
++ status = "okay";
++};
++
++&combphy2 {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&gmac0 {
++ assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
++ assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
++ assigned-clock-rates = <0>, <125000000>;
++ clock_in_out = "output";
++ phy-handle = <&rgmii_phy0>;
++ phy-mode = "rgmii-id";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac0_miim
++ &gmac0_tx_bus2
++ &gmac0_rx_bus2
++ &gmac0_rgmii_clk
++ &gmac0_rgmii_bus>;
++ snps,reset-gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_LOW>;
++ snps,reset-active-low;
++ /* Reset time is 15ms, 50ms for rtl8211f */
++ snps,reset-delays-us = <0 15000 50000>;
++ tx_delay = <0x3c>;
++ rx_delay = <0x2f>;
++ status = "okay";
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu>;
++ status = "okay";
++};
++
++&hdmi {
++ avdd-0v9-supply = <&vdda0v9_image>;
++ avdd-1v8-supply = <&vcca1v8_image>;
++ status = "okay";
++};
++
++&hdmi_in {
++ hdmi_in_vp0: endpoint {
++ remote-endpoint = <&vp0_out_hdmi>;
++ };
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&hdmi_sound {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++
++ vdd_cpu: regulator@1c {
++ compatible = "tcs,tcs4525";
++ reg = <0x1c>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1150000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ rk809: pmic@20 {
++ compatible = "rockchip,rk809";
++ reg = <0x20>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++ #clock-cells = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int>;
++ rockchip,system-power-controller;
++ vcc1-supply = <&vcc3v3_sys>;
++ vcc2-supply = <&vcc3v3_sys>;
++ vcc3-supply = <&vcc3v3_sys>;
++ vcc4-supply = <&vcc3v3_sys>;
++ vcc5-supply = <&vcc3v3_sys>;
++ vcc6-supply = <&vcc3v3_sys>;
++ vcc7-supply = <&vcc3v3_sys>;
++ vcc8-supply = <&vcc3v3_sys>;
++ vcc9-supply = <&vcc3v3_sys>;
++ wakeup-source;
++
++ regulators {
++ vdd_logic: DCDC_REG1 {
++ regulator-name = "vdd_logic";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_gpu: DCDC_REG2 {
++ regulator-name = "vdd_gpu";
++ regulator-always-on;
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vdd_npu: DCDC_REG4 {
++ regulator-name = "vdd_npu";
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8: DCDC_REG5 {
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_image: LDO_REG1 {
++ regulator-name = "vdda0v9_image";
++ regulator-min-microvolt = <950000>;
++ regulator-max-microvolt = <950000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda_0v9: LDO_REG2 {
++ regulator-name = "vdda_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_pmu: LDO_REG3 {
++ regulator-name = "vdda0v9_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vccio_acodec: LDO_REG4 {
++ regulator-name = "vccio_acodec";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd: LDO_REG5 {
++ regulator-name = "vccio_sd";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_pmu: LDO_REG6 {
++ regulator-name = "vcc3v3_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcca_1v8: LDO_REG7 {
++ regulator-name = "vcca_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcca1v8_pmu: LDO_REG8 {
++ regulator-name = "vcca1v8_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcca1v8_image: LDO_REG9 {
++ regulator-name = "vcca1v8_image";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_3v3: SWITCH_REG1 {
++ regulator-name = "vcc_3v3";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_sd: SWITCH_REG2 {
++ regulator-name = "vcc3v3_sd";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++
++ };
++};
++
++&i2c5 {
++ status = "okay";
++
++ hym8563: rtc@51 {
++ compatible = "haoyu,hym8563";
++ reg = <0x51>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
++ #clock-cells = <0>;
++ clock-output-names = "rtcic_32kout";
++ pinctrl-names = "default";
++ pinctrl-0 = <&hym8563_int>;
++ wakeup-source;
++ };
++};
++
++&i2s0_8ch {
++ status = "okay";
++};
++
++&i2s1_8ch {
++ rockchip,trcm-sync-tx-only;
++ status = "okay";
++};
++
++&mdio0 {
++ rgmii_phy0: ethernet-phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <1>;
++ pinctrl-0 = <ð_phy0_reset_pin>;
++ pinctrl-names = "default";
++ reset-assert-us = <10000>;
++ reset-deassert-us = <50000>;
++ reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
++ };
++};
++
++&pcie2x1 {
++ num-lanes = <1>;
++ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++};
++
++&pcie30phy {
++ data-lanes = <1 2>;
++ status = "okay";
++};
++
++&pcie3x1 {
++ num-lanes = <1>;
++ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pcie>;
++ status = "okay";
++};
++
++&pcie3x2 {
++ num-lanes = <1>;
++ num-ib-windows = <8>;
++ num-ob-windows = <8>;
++ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pcie>;
++ status = "okay";
++};
++
++&pinctrl {
++ gmac0 {
++ eth_phy0_reset_pin: eth-phy0-reset-pin {
++ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++ };
++
++ gpio-leds {
++ lan1_led_pin: lan1-led-pin {
++ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ lan2_led_pin: lan2-led-pin {
++ rockchip,pins = <3 RK_PD7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ power_led_pin: power-led-pin {
++ rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wan_led_pin: wan-led-pin {
++ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ hym8563 {
++ hym8563_int: hym8563-int {
++ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ pmic {
++ pmic_int: pmic-int {
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb {
++ vcc5v0_usb_host_en: vcc5v0-usb-host-en {
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmuio1-supply = <&vcc3v3_pmu>;
++ pmuio2-supply = <&vcc3v3_pmu>;
++ vccio1-supply = <&vccio_acodec>;
++ vccio3-supply = <&vccio_sd>;
++ vccio4-supply = <&vcc_1v8>;
++ vccio5-supply = <&vcc_3v3>;
++ vccio6-supply = <&vcc_1v8>;
++ vccio7-supply = <&vcc_3v3>;
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca_1v8>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
++ status = "okay";
++};
++
++&sdmmc0 {
++ max-frequency = <150000000>;
++ no-sdio;
++ no-mmc;
++ bus-width = <4>;
++ cap-mmc-highspeed;
++ cap-sd-highspeed;
++ disable-wp;
++ vmmc-supply = <&vcc3v3_sd>;
++ vqmmc-supply = <&vccio_sd>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++ status = "okay";
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <1>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ extcon = <&usb2phy0>;
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usb_host1_ehci {
++ status = "okay";
++};
++
++&usb_host1_ohci {
++ status = "okay";
++};
++
++&usb_host1_xhci {
++ status = "okay";
++};
++
++&usb2phy0 {
++ status = "okay";
++};
++
++&usb2phy0_host {
++ phy-supply = <&vcc5v0_usb_host>;
++ status = "okay";
++};
++
++&usb2phy0_otg {
++ status = "okay";
++};
++
++&usb2phy1 {
++ status = "okay";
++};
++
++&usb2phy1_host {
++ phy-supply = <&vcc5v0_usb_otg>;
++ status = "okay";
++};
++
++&usb2phy1_otg {
++ status = "okay";
++};
++
++&vop {
++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++ status = "okay";
++};
++
++&vop_mmu {
++ status = "okay";
++};
++
++&vp0 {
++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++ remote-endpoint = <&hdmi_in_vp0>;
++ };
++};
--- /dev/null
+From c8ec73b05a95d9f0969ae0f28dd8799a54fcdfc7 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 18 Mar 2023 16:37:41 +0800
+Subject: [PATCH] arm64: dts: rockchip: create common dtsi for NanoPi R5 series
+
+Create common dtsi for the FriendlyElec NanoPi R5 series.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230318083745.6181-2-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dts | 575 +----------------
+ .../boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 596 ++++++++++++++++++
+ 2 files changed, 597 insertions(+), 574 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -7,12 +7,7 @@
+ */
+
+ /dts-v1/;
+-#include <dt-bindings/gpio/gpio.h>
+-#include <dt-bindings/input/input.h>
+-#include <dt-bindings/leds/common.h>
+-#include <dt-bindings/pinctrl/rockchip.h>
+-#include <dt-bindings/soc/rockchip,vop2.h>
+-#include "rk3568.dtsi"
++#include "rk3568-nanopi-r5s.dtsi"
+
+ / {
+ model = "FriendlyElec NanoPi R5S";
+@@ -20,23 +15,6 @@
+
+ aliases {
+ ethernet0 = &gmac0;
+- mmc0 = &sdmmc0;
+- mmc1 = &sdhci;
+- };
+-
+- chosen: chosen {
+- stdout-path = "serial2:1500000n8";
+- };
+-
+- hdmi-con {
+- compatible = "hdmi-connector";
+- type = "a";
+-
+- port {
+- hdmi_con_in: endpoint {
+- remote-endpoint = <&hdmi_out_con>;
+- };
+- };
+ };
+
+ gpio-leds {
+@@ -71,130 +49,6 @@
+ gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+-
+- vdd_usbc: vdd-usbc-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vdd_usbc";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- };
+-
+- vcc3v3_sys: vcc3v3-sys-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc3v3_sys";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+- vin-supply = <&vdd_usbc>;
+- };
+-
+- vcc5v0_sys: vcc5v0-sys-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc5v0_sys";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vdd_usbc>;
+- };
+-
+- vcc3v3_pcie: vcc3v3-pcie-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc3v3_pcie";
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+- enable-active-high;
+- gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
+- startup-delay-us = <200000>;
+- vin-supply = <&vcc5v0_sys>;
+- };
+-
+- vcc5v0_usb: vcc5v0-usb-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "vcc5v0_usb";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vdd_usbc>;
+- };
+-
+- vcc5v0_usb_host: vcc5v0-usb-host-regulator {
+- compatible = "regulator-fixed";
+- enable-active-high;
+- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&vcc5v0_usb_host_en>;
+- regulator-name = "vcc5v0_usb_host";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_usb>;
+- };
+-
+- vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
+- compatible = "regulator-fixed";
+- enable-active-high;
+- gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&vcc5v0_usb_otg_en>;
+- regulator-name = "vcc5v0_usb_otg";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_usb>;
+- };
+-
+- pcie30_avdd0v9: pcie30-avdd0v9-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "pcie30_avdd0v9";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <900000>;
+- regulator-max-microvolt = <900000>;
+- vin-supply = <&vcc3v3_sys>;
+- };
+-
+- pcie30_avdd1v8: pcie30-avdd1v8-regulator {
+- compatible = "regulator-fixed";
+- regulator-name = "pcie30_avdd1v8";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+- vin-supply = <&vcc3v3_sys>;
+- };
+-};
+-
+-&combphy0 {
+- status = "okay";
+-};
+-
+-&combphy1 {
+- status = "okay";
+-};
+-
+-&combphy2 {
+- status = "okay";
+-};
+-
+-&cpu0 {
+- cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu1 {
+- cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu2 {
+- cpu-supply = <&vdd_cpu>;
+-};
+-
+-&cpu3 {
+- cpu-supply = <&vdd_cpu>;
+ };
+
+ &gmac0 {
+@@ -219,292 +73,6 @@
+ status = "okay";
+ };
+
+-&gpu {
+- mali-supply = <&vdd_gpu>;
+- status = "okay";
+-};
+-
+-&hdmi {
+- avdd-0v9-supply = <&vdda0v9_image>;
+- avdd-1v8-supply = <&vcca1v8_image>;
+- status = "okay";
+-};
+-
+-&hdmi_in {
+- hdmi_in_vp0: endpoint {
+- remote-endpoint = <&vp0_out_hdmi>;
+- };
+-};
+-
+-&hdmi_out {
+- hdmi_out_con: endpoint {
+- remote-endpoint = <&hdmi_con_in>;
+- };
+-};
+-
+-&hdmi_sound {
+- status = "okay";
+-};
+-
+-&i2c0 {
+- status = "okay";
+-
+- vdd_cpu: regulator@1c {
+- compatible = "tcs,tcs4525";
+- reg = <0x1c>;
+- fcs,suspend-voltage-selector = <1>;
+- regulator-name = "vdd_cpu";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <800000>;
+- regulator-max-microvolt = <1150000>;
+- regulator-ramp-delay = <2300>;
+- vin-supply = <&vcc5v0_sys>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- rk809: pmic@20 {
+- compatible = "rockchip,rk809";
+- reg = <0x20>;
+- interrupt-parent = <&gpio0>;
+- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+- #clock-cells = <1>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&pmic_int>;
+- rockchip,system-power-controller;
+- vcc1-supply = <&vcc3v3_sys>;
+- vcc2-supply = <&vcc3v3_sys>;
+- vcc3-supply = <&vcc3v3_sys>;
+- vcc4-supply = <&vcc3v3_sys>;
+- vcc5-supply = <&vcc3v3_sys>;
+- vcc6-supply = <&vcc3v3_sys>;
+- vcc7-supply = <&vcc3v3_sys>;
+- vcc8-supply = <&vcc3v3_sys>;
+- vcc9-supply = <&vcc3v3_sys>;
+- wakeup-source;
+-
+- regulators {
+- vdd_logic: DCDC_REG1 {
+- regulator-name = "vdd_logic";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-init-microvolt = <900000>;
+- regulator-initial-mode = <0x2>;
+- regulator-min-microvolt = <500000>;
+- regulator-max-microvolt = <1350000>;
+- regulator-ramp-delay = <6001>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdd_gpu: DCDC_REG2 {
+- regulator-name = "vdd_gpu";
+- regulator-always-on;
+- regulator-init-microvolt = <900000>;
+- regulator-initial-mode = <0x2>;
+- regulator-min-microvolt = <500000>;
+- regulator-max-microvolt = <1350000>;
+- regulator-ramp-delay = <6001>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vcc_ddr: DCDC_REG3 {
+- regulator-name = "vcc_ddr";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-initial-mode = <0x2>;
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- };
+- };
+-
+- vdd_npu: DCDC_REG4 {
+- regulator-name = "vdd_npu";
+- regulator-init-microvolt = <900000>;
+- regulator-initial-mode = <0x2>;
+- regulator-min-microvolt = <500000>;
+- regulator-max-microvolt = <1350000>;
+- regulator-ramp-delay = <6001>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vcc_1v8: DCDC_REG5 {
+- regulator-name = "vcc_1v8";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdda0v9_image: LDO_REG1 {
+- regulator-name = "vdda0v9_image";
+- regulator-min-microvolt = <950000>;
+- regulator-max-microvolt = <950000>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdda_0v9: LDO_REG2 {
+- regulator-name = "vdda_0v9";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <900000>;
+- regulator-max-microvolt = <900000>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vdda0v9_pmu: LDO_REG3 {
+- regulator-name = "vdda0v9_pmu";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <900000>;
+- regulator-max-microvolt = <900000>;
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <900000>;
+- };
+- };
+-
+- vccio_acodec: LDO_REG4 {
+- regulator-name = "vccio_acodec";
+- regulator-always-on;
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vccio_sd: LDO_REG5 {
+- regulator-name = "vccio_sd";
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <3300000>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vcc3v3_pmu: LDO_REG6 {
+- regulator-name = "vcc3v3_pmu";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <3300000>;
+- regulator-max-microvolt = <3300000>;
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <3300000>;
+- };
+- };
+-
+- vcca_1v8: LDO_REG7 {
+- regulator-name = "vcca_1v8";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vcca1v8_pmu: LDO_REG8 {
+- regulator-name = "vcca1v8_pmu";
+- regulator-always-on;
+- regulator-boot-on;
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+-
+- regulator-state-mem {
+- regulator-on-in-suspend;
+- regulator-suspend-microvolt = <1800000>;
+- };
+- };
+-
+- vcca1v8_image: LDO_REG9 {
+- regulator-name = "vcca1v8_image";
+- regulator-min-microvolt = <1800000>;
+- regulator-max-microvolt = <1800000>;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vcc_3v3: SWITCH_REG1 {
+- regulator-name = "vcc_3v3";
+- regulator-always-on;
+- regulator-boot-on;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+-
+- vcc3v3_sd: SWITCH_REG2 {
+- regulator-name = "vcc3v3_sd";
+- regulator-always-on;
+- regulator-boot-on;
+-
+- regulator-state-mem {
+- regulator-off-in-suspend;
+- };
+- };
+- };
+-
+- };
+-};
+-
+-&i2c5 {
+- status = "okay";
+-
+- hym8563: rtc@51 {
+- compatible = "haoyu,hym8563";
+- reg = <0x51>;
+- interrupt-parent = <&gpio0>;
+- interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+- #clock-cells = <0>;
+- clock-output-names = "rtcic_32kout";
+- pinctrl-names = "default";
+- pinctrl-0 = <&hym8563_int>;
+- wakeup-source;
+- };
+-};
+-
+-&i2s0_8ch {
+- status = "okay";
+-};
+-
+-&i2s1_8ch {
+- rockchip,trcm-sync-tx-only;
+- status = "okay";
+-};
+-
+ &mdio0 {
+ rgmii_phy0: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+@@ -568,146 +136,5 @@
+ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+-
+- hym8563 {
+- hym8563_int: hym8563-int {
+- rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+- };
+- };
+-
+- pmic {
+- pmic_int: pmic-int {
+- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+- };
+- };
+-
+- usb {
+- vcc5v0_usb_host_en: vcc5v0-usb-host-en {
+- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+-
+- vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
+- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+- };
+- };
+-};
+-
+-&pmu_io_domains {
+- pmuio1-supply = <&vcc3v3_pmu>;
+- pmuio2-supply = <&vcc3v3_pmu>;
+- vccio1-supply = <&vccio_acodec>;
+- vccio3-supply = <&vccio_sd>;
+- vccio4-supply = <&vcc_1v8>;
+- vccio5-supply = <&vcc_3v3>;
+- vccio6-supply = <&vcc_1v8>;
+- vccio7-supply = <&vcc_3v3>;
+- status = "okay";
+-};
+-
+-&saradc {
+- vref-supply = <&vcca_1v8>;
+- status = "okay";
+-};
+-
+-&sdhci {
+- bus-width = <8>;
+- max-frequency = <200000000>;
+- non-removable;
+- pinctrl-names = "default";
+- pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
+- status = "okay";
+-};
+-
+-&sdmmc0 {
+- max-frequency = <150000000>;
+- no-sdio;
+- no-mmc;
+- bus-width = <4>;
+- cap-mmc-highspeed;
+- cap-sd-highspeed;
+- disable-wp;
+- vmmc-supply = <&vcc3v3_sd>;
+- vqmmc-supply = <&vccio_sd>;
+- pinctrl-names = "default";
+- pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+- status = "okay";
+-};
+-
+-&tsadc {
+- rockchip,hw-tshut-mode = <1>;
+- rockchip,hw-tshut-polarity = <0>;
+- status = "okay";
+-};
+-
+-&uart2 {
+- status = "okay";
+-};
+-
+-&usb_host0_ehci {
+- status = "okay";
+-};
+-
+-&usb_host0_ohci {
+- status = "okay";
+-};
+-
+-&usb_host0_xhci {
+- extcon = <&usb2phy0>;
+- dr_mode = "host";
+- status = "okay";
+-};
+-
+-&usb_host1_ehci {
+- status = "okay";
+-};
+-
+-&usb_host1_ohci {
+- status = "okay";
+ };
+
+-&usb_host1_xhci {
+- status = "okay";
+-};
+-
+-&usb2phy0 {
+- status = "okay";
+-};
+-
+-&usb2phy0_host {
+- phy-supply = <&vcc5v0_usb_host>;
+- status = "okay";
+-};
+-
+-&usb2phy0_otg {
+- status = "okay";
+-};
+-
+-&usb2phy1 {
+- status = "okay";
+-};
+-
+-&usb2phy1_host {
+- phy-supply = <&vcc5v0_usb_otg>;
+- status = "okay";
+-};
+-
+-&usb2phy1_otg {
+- status = "okay";
+-};
+-
+-&vop {
+- assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+- assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+- status = "okay";
+-};
+-
+-&vop_mmu {
+- status = "okay";
+-};
+-
+-&vp0 {
+- vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+- reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+- remote-endpoint = <&hdmi_in_vp0>;
+- };
+-};
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -0,0 +1,596 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3568.dtsi"
++
++/ {
++ aliases {
++ mmc0 = &sdmmc0;
++ mmc1 = &sdhci;
++ };
++
++ chosen: chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ hdmi-con {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ vdd_usbc: vdd-usbc-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd_usbc";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc3v3_sys: vcc3v3-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vdd_usbc>;
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vdd_usbc>;
++ };
++
++ vcc3v3_pcie: vcc3v3-pcie-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_pcie";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ enable-active-high;
++ gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
++ startup-delay-us = <200000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc5v0_usb: vcc5v0-usb-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_usb";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vdd_usbc>;
++ };
++
++ vcc5v0_usb_host: vcc5v0-usb-host-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb_host_en>;
++ regulator-name = "vcc5v0_usb_host";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++
++ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb_otg_en>;
++ regulator-name = "vcc5v0_usb_otg";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_usb>;
++ };
++
++ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "pcie30_avdd0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "pcie30_avdd1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++};
++
++&combphy0 {
++ status = "okay";
++};
++
++&combphy1 {
++ status = "okay";
++};
++
++&combphy2 {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu>;
++ status = "okay";
++};
++
++&hdmi {
++ avdd-0v9-supply = <&vdda0v9_image>;
++ avdd-1v8-supply = <&vcca1v8_image>;
++ status = "okay";
++};
++
++&hdmi_in {
++ hdmi_in_vp0: endpoint {
++ remote-endpoint = <&vp0_out_hdmi>;
++ };
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&hdmi_sound {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++
++ vdd_cpu: regulator@1c {
++ compatible = "tcs,tcs4525";
++ reg = <0x1c>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1150000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v0_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ rk809: pmic@20 {
++ compatible = "rockchip,rk809";
++ reg = <0x20>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++ #clock-cells = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int>;
++ rockchip,system-power-controller;
++ vcc1-supply = <&vcc3v3_sys>;
++ vcc2-supply = <&vcc3v3_sys>;
++ vcc3-supply = <&vcc3v3_sys>;
++ vcc4-supply = <&vcc3v3_sys>;
++ vcc5-supply = <&vcc3v3_sys>;
++ vcc6-supply = <&vcc3v3_sys>;
++ vcc7-supply = <&vcc3v3_sys>;
++ vcc8-supply = <&vcc3v3_sys>;
++ vcc9-supply = <&vcc3v3_sys>;
++ wakeup-source;
++
++ regulators {
++ vdd_logic: DCDC_REG1 {
++ regulator-name = "vdd_logic";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_gpu: DCDC_REG2 {
++ regulator-name = "vdd_gpu";
++ regulator-always-on;
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vdd_npu: DCDC_REG4 {
++ regulator-name = "vdd_npu";
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8: DCDC_REG5 {
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_image: LDO_REG1 {
++ regulator-name = "vdda0v9_image";
++ regulator-min-microvolt = <950000>;
++ regulator-max-microvolt = <950000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda_0v9: LDO_REG2 {
++ regulator-name = "vdda_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_pmu: LDO_REG3 {
++ regulator-name = "vdda0v9_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vccio_acodec: LDO_REG4 {
++ regulator-name = "vccio_acodec";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd: LDO_REG5 {
++ regulator-name = "vccio_sd";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_pmu: LDO_REG6 {
++ regulator-name = "vcc3v3_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcca_1v8: LDO_REG7 {
++ regulator-name = "vcca_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcca1v8_pmu: LDO_REG8 {
++ regulator-name = "vcca1v8_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcca1v8_image: LDO_REG9 {
++ regulator-name = "vcca1v8_image";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_3v3: SWITCH_REG1 {
++ regulator-name = "vcc_3v3";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_sd: SWITCH_REG2 {
++ regulator-name = "vcc3v3_sd";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++
++ };
++};
++
++&i2c5 {
++ status = "okay";
++
++ hym8563: rtc@51 {
++ compatible = "haoyu,hym8563";
++ reg = <0x51>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
++ #clock-cells = <0>;
++ clock-output-names = "rtcic_32kout";
++ pinctrl-names = "default";
++ pinctrl-0 = <&hym8563_int>;
++ wakeup-source;
++ };
++};
++
++&i2s0_8ch {
++ status = "okay";
++};
++
++&i2s1_8ch {
++ rockchip,trcm-sync-tx-only;
++ status = "okay";
++};
++
++&pcie30phy {
++ data-lanes = <1 2>;
++ status = "okay";
++};
++
++&pinctrl {
++ hym8563 {
++ hym8563_int: hym8563-int {
++ rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ pmic {
++ pmic_int: pmic-int {
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ usb {
++ vcc5v0_usb_host_en: vcc5v0-usb-host-en {
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmuio1-supply = <&vcc3v3_pmu>;
++ pmuio2-supply = <&vcc3v3_pmu>;
++ vccio1-supply = <&vccio_acodec>;
++ vccio3-supply = <&vccio_sd>;
++ vccio4-supply = <&vcc_1v8>;
++ vccio5-supply = <&vcc_3v3>;
++ vccio6-supply = <&vcc_1v8>;
++ vccio7-supply = <&vcc_3v3>;
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca_1v8>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
++ status = "okay";
++};
++
++&sdmmc0 {
++ max-frequency = <150000000>;
++ no-sdio;
++ no-mmc;
++ bus-width = <4>;
++ cap-mmc-highspeed;
++ cap-sd-highspeed;
++ disable-wp;
++ vmmc-supply = <&vcc3v3_sd>;
++ vqmmc-supply = <&vccio_sd>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
++ status = "okay";
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <1>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ extcon = <&usb2phy0>;
++ dr_mode = "host";
++ status = "okay";
++};
++
++&usb_host1_ehci {
++ status = "okay";
++};
++
++&usb_host1_ohci {
++ status = "okay";
++};
++
++&usb_host1_xhci {
++ status = "okay";
++};
++
++&usb2phy0 {
++ status = "okay";
++};
++
++&usb2phy0_host {
++ phy-supply = <&vcc5v0_usb_host>;
++ status = "okay";
++};
++
++&usb2phy0_otg {
++ status = "okay";
++};
++
++&usb2phy1 {
++ status = "okay";
++};
++
++&usb2phy1_host {
++ phy-supply = <&vcc5v0_usb_otg>;
++ status = "okay";
++};
++
++&usb2phy1_otg {
++ status = "okay";
++};
++
++&vop {
++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++ status = "okay";
++};
++
++&vop_mmu {
++ status = "okay";
++};
++
++&vp0 {
++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++ remote-endpoint = <&hdmi_in_vp0>;
++ };
++};
--- /dev/null
+From 31425b1fadb2040b359e52ffc24c049a78d56c96 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 18 Mar 2023 16:37:44 +0800
+Subject: [PATCH] arm64: dts: rockchip: fix gmac support for NanoPi R5S
+
+- Changed phy-mode to rgmii.
+
+- Fixed pull type in pinctrl for gmac0.
+
+- Removed duplicate properties in mdio node.
+ These properties are defined in the gmac0 node already.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230318083745.6181-5-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -57,7 +57,7 @@
+ assigned-clock-rates = <0>, <125000000>;
+ clock_in_out = "output";
+ phy-handle = <&rgmii_phy0>;
+- phy-mode = "rgmii-id";
++ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac0_miim
+ &gmac0_tx_bus2
+@@ -79,9 +79,6 @@
+ reg = <1>;
+ pinctrl-0 = <ð_phy0_reset_pin>;
+ pinctrl-names = "default";
+- reset-assert-us = <10000>;
+- reset-deassert-us = <50000>;
+- reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+@@ -115,7 +112,7 @@
+ &pinctrl {
+ gmac0 {
+ eth_phy0_reset_pin: eth-phy0-reset-pin {
+- rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_down>;
++ rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
--- /dev/null
+From 975e9bbad11950fc8276f1fa260d8bf2c341aa41 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 18 Mar 2023 16:37:45 +0800
+Subject: [PATCH] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5
+ series
+
+This is for the audio output which does not exist on the boards.
+Also disable regulator-always-on for vccio_acodec since it's only
+used by the audio output.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230318083745.6181-6-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -330,7 +330,6 @@
+
+ vccio_acodec: LDO_REG4 {
+ regulator-name = "vccio_acodec";
+- regulator-always-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+@@ -441,11 +440,6 @@
+ status = "okay";
+ };
+
+-&i2s1_8ch {
+- rockchip,trcm-sync-tx-only;
+- status = "okay";
+-};
+-
+ &pcie30phy {
+ data-lanes = <1 2>;
+ status = "okay";
--- /dev/null
+From 05620031408ac6cfc6d5c048431827e49aa0ade1 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 18 Mar 2023 16:37:43 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R5C
+
+FriendlyARM NanoPi R5C is an open-sourced mini IoT gateway device.
+
+Specification:
+- Rockchip RK3568
+- 1/4GB LPDDR4X RAM
+- 8/32GB eMMC
+- SD card slot
+- M.2 Connector
+- 2x USB 3.0 Port
+- 2x 2500 Base-T (PCIe, r8125)
+- HDMI 2.0
+- MIPI DSI/CSI
+- USB Type C 5V
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230318083745.6181-4-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3568-nanopi-r5c.dts | 112 ++++++++++++++++++
+ 2 files changed, 113 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -74,5 +74,6 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-ro
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+@@ -0,0 +1,112 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2022 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyelec.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include "rk3568-nanopi-r5s.dtsi"
++
++/ {
++ model = "FriendlyElec NanoPi R5C";
++ compatible = "friendlyarm,nanopi-r5c", "rockchip,rk3568";
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-names = "default";
++ pinctrl-0 = <&reset_button_pin>;
++
++ button-reset {
++ debounce-interval = <50>;
++ gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
++ label = "reset";
++ linux,code = <KEY_RESTART>;
++ };
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++ pinctrl-names = "default";
++ pinctrl-0 = <&lan_led_pin>, <&power_led_pin>, <&wan_led_pin>, <&wlan_led_pin>;
++
++ led-lan {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_LAN;
++ gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_HIGH>;
++ };
++
++ power_led: led-power {
++ color = <LED_COLOR_ID_RED>;
++ function = LED_FUNCTION_POWER;
++ linux,default-trigger = "heartbeat";
++ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-wan {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_WAN;
++ gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
++ };
++
++ led-wlan {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_WLAN;
++ gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
++ };
++ };
++};
++
++&pcie2x1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie20_reset_pin>;
++ reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
++ status = "okay";
++};
++
++&pcie3x1 {
++ num-lanes = <1>;
++ reset-gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pcie>;
++ status = "okay";
++};
++
++&pcie3x2 {
++ num-lanes = <1>;
++ reset-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pcie>;
++ status = "okay";
++};
++
++&pinctrl {
++ gpio-leds {
++ lan_led_pin: lan-led-pin {
++ rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ power_led_pin: power-led-pin {
++ rockchip,pins = <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wan_led_pin: wan-led-pin {
++ rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wlan_led_pin: wlan-led-pin {
++ rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pcie {
++ pcie20_reset_pin: pcie20-reset-pin {
++ rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ rockchip-key {
++ reset_button_pin: reset-button-pin {
++ rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++};
--- /dev/null
+From 5325593377f07de31f7e473a9677a28a04c891f3 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Thu, 11 May 2023 00:18:50 +0800
+Subject: [PATCH] arm64: dts: rockchip: fix button reset pin for nanopi r5c
+
+The reset pin was wrongly assigned due to a copy/paste error,
+fix it to match actual gpio pin.
+
+While at it, remove a blank line from nanopi r5s dts.
+
+Fixes: 05620031408a ("arm64: dts: rockchip: Add FriendlyARM NanoPi R5C")
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230510161850.4866-1-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts | 2 +-
+ arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts | 1 -
+ 2 files changed, 1 insertion(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+@@ -106,7 +106,7 @@
+
+ rockchip-key {
+ reset_button_pin: reset-button-pin {
+- rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+ };
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -134,4 +134,3 @@
+ };
+ };
+ };
+-
--- /dev/null
+From fc5a80a432607d05e85bba37971712405f75c546 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 16 Dec 2023 12:07:23 +0800
+Subject: [PATCH] arm64: dts: rockchip: configure eth pad driver strength
+ for orangepi r1 plus lts
+
+The default strength is not enough to provide stable connection
+under 3.3v LDO voltage.
+
+Fixes: 387b3bbac5ea ("arm64: dts: rockchip: Add Xunlong OrangePi R1 Plus LTS")
+Cc: stable@vger.kernel.org # 6.6+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20231216040723.17864-1-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus-lts.dts
+@@ -26,9 +26,11 @@
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+
++ motorcomm,auto-sleep-disabled;
+ motorcomm,clk-out-frequency-hz = <125000000>;
+ motorcomm,keep-pll-enabled;
+- motorcomm,auto-sleep-disabled;
++ motorcomm,rx-clk-drv-microamp = <5020>;
++ motorcomm,rx-data-drv-microamp = <5020>;
+
+ pinctrl-0 = <ð_phy_reset_pin>;
+ pinctrl-names = "default";
--- /dev/null
+From 096ebfb74b19f2d4bdcbc33ae02e857ff4b3e0a0 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Thu, 12 Jan 2023 16:29:02 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
+
+Radxa Compute Module 3(CM3) IO board is an application board from Radxa
+and is compatible with Raspberry Pi CM4 IO form factor.
+
+Specification:
+- 1x HDMI,
+- 2x MIPI DSI
+- 2x MIPI CSI2
+- 1x eDP
+- 1x PCIe card
+- 2x SATA
+- 2x USB 2.0 Host
+- 1x USB 3.0
+- 1x USB 2.0 OTG
+- Phone jack
+- microSD slot
+- 40-pin GPIO expansion header
+- 12V DC
+
+Radxa CM3 needs to mount on top of this IO board in order to create
+complete Radxa CM3 IO board platform.
+
+Add support for Radxa CM3 IO Board.
+
+Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
+Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
+Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230112105902.192852-3-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 179 ++++++++++++++++++
+ 2 files changed, 180 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pi
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -0,0 +1,179 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Radxa Limited
++ * Copyright (c) 2022 Amarula Solutions(India)
++ */
++
++/dts-v1/;
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3566.dtsi"
++#include "rk3566-radxa-cm3.dtsi"
++
++/ {
++ model = "Radxa Compute Module 3(CM3) IO Board";
++ compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
++
++ aliases {
++ mmc1 = &sdmmc0;
++ };
++
++ chosen: chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ hdmi-con {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-1 {
++ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_ACTIVITY;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pi_nled_activity>;
++ };
++ };
++
++ vcc5v0_usb30: vcc5v0-usb30-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_usb30";
++ enable-active-high;
++ gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb30_en_h>;
++ regulator-always-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc_sys>;
++ };
++
++ vcca1v8_image: vcca1v8-image-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcca1v8_image";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc_1v8_p>;
++ };
++
++ vdda0v9_image: vdda0v9-image-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcca0v9_image";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ vin-supply = <&vdda_0v9>;
++ };
++};
++
++&combphy1 {
++ status = "okay";
++};
++
++&hdmi {
++ avdd-0v9-supply = <&vdda0v9_image>;
++ avdd-1v8-supply = <&vcca1v8_image>;
++ status = "okay";
++};
++
++&hdmi_in {
++ hdmi_in_vp0: endpoint {
++ remote-endpoint = <&vp0_out_hdmi>;
++ };
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&hdmi_sound {
++ status = "okay";
++};
++
++&pinctrl {
++ leds {
++ pi_nled_activity: pi-nled-activity {
++ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ sdcard {
++ sdmmc_pwren: sdmmc-pwren {
++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ usb {
++ vcc5v0_usb30_en_h: vcc5v0-host-en-h {
++ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&sdmmc0 {
++ bus-width = <4>;
++ cap-mmc-highspeed;
++ cap-sd-highspeed;
++ disable-wp;
++ vqmmc-supply = <&vccio_sd>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb2phy0_host {
++ phy-supply = <&vcc5v0_usb30>;
++ status = "okay";
++};
++
++&usb2phy1_host {
++ status = "okay";
++};
++
++&usb2phy1_otg {
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host1_xhci {
++ status = "okay";
++};
++
++&vop {
++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++ status = "okay";
++};
++
++&vop_mmu {
++ status = "okay";
++};
++
++&vp0 {
++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++ remote-endpoint = <&hdmi_in_vp0>;
++ };
++};
--- /dev/null
+From d211665c5a833873ee37e501af58adbf028e6b5f Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Sat, 13 May 2023 21:53:07 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus
+
+The NanoPi R2C Plus is a small variant of NanoPi R2C with a on-board
+eMMC flash (8G) included.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+Link: https://lore.kernel.org/r/20230513135307.26554-2-cnsztl@gmail.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts | 33 ++++++++++++++++++++++
+ 2 files changed, 34 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -11,6 +11,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-od
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2c-plus.dts
+@@ -0,0 +1,33 @@
++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
++/*
++ * Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
++ * (http://www.friendlyarm.com)
++ *
++ * Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
++ */
++
++/dts-v1/;
++#include "rk3328-nanopi-r2c.dts"
++
++/ {
++ model = "FriendlyElec NanoPi R2C Plus";
++ compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328";
++
++ aliases {
++ mmc1 = &emmc;
++ };
++};
++
++&emmc {
++ bus-width = <8>;
++ cap-mmc-highspeed;
++ max-frequency = <150000000>;
++ mmc-ddr-1_8v;
++ mmc-hs200-1_8v;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
++ vmmc-supply = <&vcc_io_33>;
++ vqmmc-supply = <&vcc18_emmc>;
++ status = "okay";
++};
--- /dev/null
+From cc52bfc04726a574fc4440bbbe0c710890e7040a Mon Sep 17 00:00:00 2001
+From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Date: Wed, 25 Jan 2023 21:40:22 +0530
+Subject: [PATCH] arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
+
+Add ethernet nodes for enabling gmac1 on the Radxa CM3 IO board.
+
+Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230125161023.12115-1-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 93 +++++++++++++++++++
+ 1 file changed, 93 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -21,6 +21,13 @@
+ stdout-path = "serial2:1500000n8";
+ };
+
++ gmac1_clkin: external-gmac1-clock {
++ compatible = "fixed-clock";
++ clock-frequency = <125000000>;
++ clock-output-names = "gmac1_clkin";
++ #clock-cells = <0>;
++ };
++
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+@@ -83,6 +90,29 @@
+ status = "okay";
+ };
+
++&gmac1 {
++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
++ assigned-clock-rates = <0>, <125000000>;
++ clock_in_out = "input";
++ phy-handle = <&rgmii_phy1>;
++ phy-mode = "rgmii";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac1m0_miim
++ &gmac1m0_tx_bus2
++ &gmac1m0_rx_bus2
++ &gmac1m0_rgmii_clk
++ &gmac1m0_rgmii_bus
++ &gmac1m0_clkinout>;
++ snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
++ snps,reset-active-low;
++ /* Reset time is 20ms, 100ms for rtl8211f */
++ snps,reset-delays-us = <0 20000 100000>;
++ tx_delay = <0x46>;
++ rx_delay = <0x2e>;
++ status = "okay";
++};
++
+ &hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+@@ -105,7 +135,70 @@
+ status = "okay";
+ };
+
++&mdio1 {
++ rgmii_phy1: ethernet-phy@0 {
++ compatible="ethernet-phy-ieee802.3-c22";
++ reg= <0x0>;
++ };
++};
++
+ &pinctrl {
++ gmac1 {
++ gmac1m0_miim: gmac1m0-miim {
++ rockchip,pins =
++ /* gmac1_mdcm0 */
++ <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_mdiom0 */
++ <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
++ rockchip,pins =
++ /* gmac1_rxd0m0 */
++ <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_rxd1m0 */
++ <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_rxdvcrsm0 */
++ <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
++ rockchip,pins =
++ /* gmac1_txd0m0 */
++ <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txd1m0 */
++ <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txenm0 */
++ <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
++ rockchip,pins =
++ /* gmac1_rxclkm0 */
++ <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txclkm0 */
++ <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
++ rockchip,pins =
++ /* gmac1_rxd2m0 */
++ <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_rxd3m0 */
++ <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txd2m0 */
++ <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txd3m0 */
++ <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_clkinout: gmac1m0-clkinout {
++ rockchip,pins =
++ /* gmac1_mclkinoutm0 */
++ <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
++ };
++ };
++
+ leds {
+ pi_nled_activity: pi-nled-activity {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
--- /dev/null
+From 7469ab529bcad50490f6ff651c3e4f03bfa88fe0 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Thu, 12 Jan 2023 16:29:01 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Radxa Compute Module 3(CM3) is one of the modules from a series
+System On Module based on the Radxa ROCK 3 series and is compatible
+with Raspberry Pi CM4 pinout and form factor.
+
+Specification:
+- Rockchip RK3566
+- up to 8GB LPDDR4
+- up to 128GB high performance eMMC
+- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
+ BT 5.0, BLE with onboard and external antenna.
+- Gigabit Ethernet PHY
+
+Radxa CM3 needs to mount on top of this IO board in order to create
+complete Radxa CM3 IO board platform.
+
+Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is
+possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board.
+
+Add support for Radxa CM3.
+
+Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
+Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230112105902.192852-2-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 345 ++++++++++++++++++
+ 1 file changed, 345 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -0,0 +1,345 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Radxa Limited
++ * Copyright (c) 2022 Amarula Solutions(India)
++ */
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++
++/ {
++ compatible = "radxa,radxa-cm3", "rockchip,rk3566";
++
++ aliases {
++ mmc0 = &sdhci;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-0 {
++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_STATUS;
++ linux,default-trigger = "timer";
++ default-state = "on";
++ pinctrl-names = "default";
++ pinctrl-0 = <&user_led2>;
++ };
++ };
++
++ vcc_sys: vcc-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc_1v8: vcc-1v8-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc_1v8_p>;
++ };
++
++ vcc_3v3: vcc-3v3-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_3v3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ vcca_1v8: vcca-1v8-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcca_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc_1v8_p>;
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu_npu>;
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++
++ vdd_cpu: regulator@1c {
++ compatible = "tcs,tcs4525";
++ reg = <0x1c>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <712500>;
++ regulator-max-microvolt = <1390000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ rk817: pmic@20 {
++ compatible = "rockchip,rk817";
++ reg = <0x20>;
++ #clock-cells = <1>;
++ clock-output-names = "rk817-clkout1", "rk817-clkout2";
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int_l>;
++ rockchip,system-power-controller;
++ wakeup-source;
++
++ vcc1-supply = <&vcc_sys>;
++ vcc2-supply = <&vcc_sys>;
++ vcc3-supply = <&vcc_sys>;
++ vcc4-supply = <&vcc_sys>;
++ vcc5-supply = <&vcc_sys>;
++ vcc6-supply = <&vcc_sys>;
++ vcc7-supply = <&vcc_sys>;
++
++ regulators {
++ vdd_logic: DCDC_REG1 {
++ regulator-name = "vdd_logic";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vdd_gpu_npu: DCDC_REG2 {
++ regulator-name = "vdd_gpu_npu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc3v3_sys: DCDC_REG4 {
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcca1v8_pmu: LDO_REG1 {
++ regulator-name = "vcca1v8_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vdda_0v9: LDO_REG2 {
++ regulator-name = "vdda_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_pmu: LDO_REG3 {
++ regulator-name = "vdda0v9_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vccio_acodec: LDO_REG4 {
++ regulator-name = "vccio_acodec";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd: LDO_REG5 {
++ regulator-name = "vccio_sd";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_pmu: LDO_REG6 {
++ regulator-name = "vcc3v3_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcc_1v8_p: LDO_REG7 {
++ regulator-name = "vcc_1v8_p";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc1v8_dvp: LDO_REG8 {
++ regulator-name = "vcc1v8_dvp";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc2v8_dvp: LDO_REG9 {
++ regulator-name = "vcc2v8_dvp";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ };
++ };
++};
++
++&pinctrl {
++ pmic {
++ pmic_int_l: pmic-int-l {
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ leds {
++ user_led2: user-led2 {
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmuio1-supply = <&vcc3v3_pmu>;
++ pmuio2-supply = <&vcc_3v3>;
++ vccio1-supply = <&vccio_acodec>;
++ vccio2-supply = <&vcc_1v8>;
++ vccio3-supply = <&vccio_sd>;
++ vccio4-supply = <&vcc_1v8>;
++ vccio5-supply = <&vcc_3v3>;
++ vccio6-supply = <&vcc_3v3>;
++ vccio7-supply = <&vcc_3v3>;
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca_1v8>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ mmc-hs200-1_8v;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++ vmmc-supply = <&vcc_3v3>;
++ vqmmc-supply = <&vcc_1v8>;
++ status = "okay";
++};
++
++&usb2phy0 {
++ status = "okay";
++};
++
++&usb2phy1 {
++ status = "okay";
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <1>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
--- /dev/null
+From af5a803bf212e077e5fb7a1d4cf6be02f74a74ca Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Wed, 25 Jan 2023 21:40:23 +0530
+Subject: [PATCH] arm64: dts: rockchip: rk3566: Enable WiFi, BT support for
+ Radxa CM3
+
+Radxa Compute Module 3 has an onboard AW_CM256SM WiFi/BT module.
+
+Add nodes for enabling it.
+
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230125161023.12115-2-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 80 +++++++++++++++++++
+ 1 file changed, 80 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -66,6 +66,15 @@
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
++
++ sdio_pwrseq: pwrseq-sdio {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&rk817 1>;
++ clock-names = "ext_clock";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_reg_on_h>;
++ reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
++ };
+ };
+
+ &cpu0 {
+@@ -287,6 +296,20 @@
+ };
+
+ &pinctrl {
++ bluetooth {
++ bt_host_wake_h: bt-host-wake-h {
++ rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_reg_on_h: bt-reg-on-h {
++ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_wake_host_h: bt-wake-host-h {
++ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+@@ -298,6 +321,16 @@
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
++
++ wifi {
++ wifi_reg_on_h: wifi-reg-on-h {
++ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wifi_host_wake_h: wifi-host-wake-h {
++ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
+ };
+
+ &pmu_io_domains {
+@@ -318,6 +351,34 @@
+ status = "okay";
+ };
+
++&sdmmc1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ bus-width = <4>;
++ disable-wp;
++ cap-sd-highspeed;
++ cap-sdio-irq;
++ keep-power-in-suspend;
++ mmc-pwrseq = <&sdio_pwrseq>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc_3v3>;
++ vqmmc-supply = <&vcc_1v8>;
++ status = "okay";
++
++ wifi@1 {
++ compatible = "brcm,bcm43455-fmac";
++ reg = <1>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "host-wake";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_host_wake_h>;
++ };
++};
++
+ &sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+@@ -330,6 +391,25 @@
+ status = "okay";
+ };
+
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
++ status = "okay";
++
++ bluetooth {
++ compatible = "brcm,bcm4345c5";
++ clocks = <&rk817 1>;
++ clock-names = "lpo";
++ device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
++ host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
++ reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
++ vbat-supply = <&vcc_3v3>;
++ vddio-supply = <&vcc_1v8>;
++ };
++};
++
+ &usb2phy0 {
+ status = "okay";
+ };
--- /dev/null
+From 477ed3ade6a46e445b4e2348b710c51df4f6f4b1 Mon Sep 17 00:00:00 2001
+From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Date: Thu, 23 Feb 2023 19:29:29 +0530
+Subject: [PATCH] arm64: dts: rockchip: Enable USB OTG for rk3566 Radxa CM3
+
+Enable USB OTG support for Radxa Compute Module 3 IO Board
+
+Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230223135929.630787-1-abbaraju.manojsai@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -254,6 +254,14 @@
+ status = "okay";
+ };
+
++&usb2phy0_otg {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ status = "okay";
++};
++
+ &vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
--- /dev/null
+From 8f19828844f20b22182719cf53be64f8c955aee8 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Mon, 23 Jan 2023 12:46:50 +0530
+Subject: [PATCH] arm64: dts: rockchip: Fix compatible for Radxa CM3
+
+The compatible string "radxa,radxa-cm3" referring the product name
+as "Radxa Radxa CM3" but the actual product name is "Radxa CM3".
+
+Fix the compatible strings.
+
+Fixes: 24a28d3eb07d ("dt-bindings: arm: rockchip: Add Radxa Compute Module 3")
+Fixes: 7469ab529bca ("arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3")
+Fixes: 096ebfb74b19 ("arm64: dts: rockchip: Add Radxa Compute Module 3 IO board")
+Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20230123071654.73139-1-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 2 +-
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -11,7 +11,7 @@
+
+ / {
+ model = "Radxa Compute Module 3(CM3) IO Board";
+- compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
++ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+
+ aliases {
+ mmc1 = &sdmmc0;
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -8,7 +8,7 @@
+ #include <dt-bindings/leds/common.h>
+
+ / {
+- compatible = "radxa,radxa-cm3", "rockchip,rk3566";
++ compatible = "radxa,cm3", "rockchip,rk3566";
+
+ aliases {
+ mmc0 = &sdhci;
--- /dev/null
+From f99a75f11f46a24dabb33e90893eebf61dca0566 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Date: Sun, 2 Jul 2023 20:52:42 +0200
+Subject: [PATCH] arm64: dts: rockchip: minor whitespace cleanup around '='
+
+The DTS code coding style expects exactly one space before and after '='
+sign.
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20230702185242.44421-1-krzysztof.kozlowski@linaro.org
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -137,8 +137,8 @@
+
+ &mdio1 {
+ rgmii_phy1: ethernet-phy@0 {
+- compatible="ethernet-phy-ieee802.3-c22";
+- reg= <0x0>;
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <0x0>;
+ };
+ };
+
--- /dev/null
+From 36d9b3ae708e865cdab95692db5a24c5d975383d Mon Sep 17 00:00:00 2001
+From: Dragan Simic <dsimic@manjaro.org>
+Date: Tue, 12 Dec 2023 09:01:39 +0100
+Subject: [PATCH] arm64: dts: rockchip: Add ethernet0 alias to the dts for
+ RK3566 boards
+
+Add ethernet0 alias to the board dts files for a few supported RK3566 boards
+that had it missing. Also, remove the ethernet0 alias from one RK3566 SoM
+dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to
+the dependent board dts files, which actually enable the GMAC.
+
+Signed-off-by: Dragan Simic <dsimic@manjaro.org>
+Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 1 +
+ 1 files changed, 1 insertions(+), 0 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -14,6 +14,7 @@
+ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+
+ aliases {
++ ethernet0 = &gmac1;
+ mmc1 = &sdmmc0;
+ };
+
--- /dev/null
+From 2bf2f4d9f673013a58109626b87329310537a611 Mon Sep 17 00:00:00 2001
+From: Chukun Pan <amadeus@jmu.edu.cn>
+Date: Fri, 9 Dec 2022 18:25:24 +0800
+Subject: [PATCH] arm64: dts: rockchip: Add Radxa CM3I E25
+
+Radxa E25 is a network application carrier board for the Radxa CM3
+Industrial (CM3I) SoM, which is based on the Rockchip RK3568 SoC.
+
+It has the following features:
+
+- MicroSD card socket, on board eMMC flash
+- 2x 2.5GbE Realtek RTL8125B Ethernet transceiver
+- 1x USB Type-C port (Power and Serial console)
+- 1x USB 3.0 OTG port
+- mini PCIe socket (USB or PCIe)
+- ngff PCIe socket (USB or SATA)
+- 1x User LED and 16x RGB LEDs
+- 26-pin expansion header
+
+Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
+Link: https://lore.kernel.org/r/20221209102524.129367-3-amadeus@jmu.edu.cn
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3568-radxa-cm3i.dtsi | 416 ++++++++++++++++++
+ .../boot/dts/rockchip/rk3568-radxa-e25.dts | 229 ++++++++++
+ 3 files changed, 646 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -78,4 +78,5 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bp
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-cm3i.dtsi
+@@ -0,0 +1,416 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++#include <dt-bindings/pinctrl/rockchip.h>
++#include "rk3568.dtsi"
++
++/ {
++ model = "Radxa CM3 Industrial Board";
++ compatible = "radxa,cm3i", "rockchip,rk3568";
++
++ aliases {
++ mmc0 = &sdhci;
++ };
++
++ chosen {
++ stdout-path = "serial2:115200n8";
++ };
++
++ gpio-leds {
++ compatible = "gpio-leds";
++
++ led_user: led-0 {
++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++ function = LED_FUNCTION_HEARTBEAT;
++ color = <LED_COLOR_ID_GREEN>;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&led_user_en>;
++ };
++ };
++
++ pcie30_avdd0v9: pcie30-avdd0v9-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "pcie30_avdd0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ pcie30_avdd1v8: pcie30-avdd1v8-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "pcie30_avdd1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ vcc3v3_sys: vcc3v3-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc5v_input>;
++ };
++
++ vcc5v0_sys: vcc5v0-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v_input>;
++ };
++
++ /* labeled +5v_input in schematic */
++ vcc5v_input: vcc5v-input-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v_input";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++};
++
++&combphy0 {
++ status = "okay";
++};
++
++&combphy1 {
++ status = "okay";
++};
++
++&combphy2 {
++ status = "okay";
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&display_subsystem {
++ status = "disabled";
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu>;
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++
++ vdd_cpu: regulator@1c {
++ compatible = "tcs,tcs4525";
++ reg = <0x1c>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <800000>;
++ regulator-max-microvolt = <1150000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc5v_input>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ rk809: pmic@20 {
++ compatible = "rockchip,rk809";
++ reg = <0x20>;
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++ #clock-cells = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int>;
++ rockchip,system-power-controller;
++ wakeup-source;
++
++ vcc1-supply = <&vcc3v3_sys>;
++ vcc2-supply = <&vcc3v3_sys>;
++ vcc3-supply = <&vcc3v3_sys>;
++ vcc4-supply = <&vcc3v3_sys>;
++ vcc5-supply = <&vcc3v3_sys>;
++ vcc6-supply = <&vcc3v3_sys>;
++ vcc7-supply = <&vcc3v3_sys>;
++ vcc8-supply = <&vcc3v3_sys>;
++ vcc9-supply = <&vcc3v3_sys>;
++
++ regulators {
++ vdd_logic: DCDC_REG1 {
++ regulator-name = "vdd_logic";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdd_gpu: DCDC_REG2 {
++ regulator-name = "vdd_gpu";
++ regulator-always-on;
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vdd_npu: DCDC_REG4 {
++ regulator-name = "vdd_npu";
++ regulator-init-microvolt = <900000>;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_1v8: DCDC_REG5 {
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_image: LDO_REG1 {
++ regulator-name = "vdda0v9_image";
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda_0v9: LDO_REG2 {
++ regulator-name = "vdda_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_pmu: LDO_REG3 {
++ regulator-name = "vdda0v9_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vccio_acodec: LDO_REG4 {
++ regulator-name = "vccio_acodec";
++ regulator-always-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd: LDO_REG5 {
++ regulator-name = "vccio_sd";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_pmu: LDO_REG6 {
++ regulator-name = "vcc3v3_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcca_1v8: LDO_REG7 {
++ regulator-name = "vcca_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcca1v8_pmu: LDO_REG8 {
++ regulator-name = "vcca1v8_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vcca1v8_image: LDO_REG9 {
++ regulator-name = "vcca1v8_image";
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_3v3: SWITCH_REG1 {
++ regulator-name = "vcc_3v3";
++ regulator-always-on;
++ regulator-boot-on;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_sd: SWITCH_REG2 {
++ regulator-name = "vcc3v3_sd";
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++ };
++ };
++};
++
++&pinctrl {
++ leds {
++ led_user_en: led_user_en {
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ pmic {
++ pmic_int: pmic_int {
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmuio1-supply = <&vcc3v3_pmu>;
++ pmuio2-supply = <&vcc3v3_pmu>;
++ vccio1-supply = <&vccio_acodec>;
++ vccio2-supply = <&vcc_1v8>;
++ vccio3-supply = <&vccio_sd>;
++ vccio4-supply = <&vcc_1v8>;
++ vccio5-supply = <&vcc_3v3>;
++ vccio6-supply = <&vcc_1v8>;
++ vccio7-supply = <&vcc_3v3>;
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca_1v8>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++ vmmc-supply = <&vcc_3v3>;
++ vqmmc-supply = <&vcc_1v8>;
++ status = "okay";
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <1>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb2phy0 {
++ status = "okay";
++};
++
++&usb2phy1 {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ extcon = <&usb2phy0>;
++};
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -0,0 +1,229 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++
++/dts-v1/;
++#include "rk3568-radxa-cm3i.dtsi"
++
++/ {
++ model = "Radxa E25";
++ compatible = "radxa,e25", "rockchip,rk3568";
++
++ aliases {
++ mmc0 = &sdmmc0;
++ mmc1 = &sdhci;
++ };
++
++ pwm-leds {
++ compatible = "pwm-leds-multicolor";
++
++ multi-led {
++ color = <LED_COLOR_ID_RGB>;
++ max-brightness = <255>;
++
++ led-red {
++ color = <LED_COLOR_ID_RED>;
++ pwms = <&pwm1 0 1000000 0>;
++ };
++
++ led-green {
++ color = <LED_COLOR_ID_GREEN>;
++ pwms = <&pwm2 0 1000000 0>;
++ };
++
++ led-blue {
++ color = <LED_COLOR_ID_BLUE>;
++ pwms = <&pwm12 0 1000000 0>;
++ };
++ };
++ };
++
++ vbus_typec: vbus-typec-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vbus_typec_en>;
++ regulator-name = "vbus_typec";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc3v3_minipcie: vcc3v3-minipcie-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&minipcie_enable_h>;
++ regulator-name = "vcc3v3_minipcie";
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ vcc3v3_ngff: vcc3v3-ngff-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&ngffpcie_enable_h>;
++ regulator-name = "vcc3v3_ngff";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++
++ /* actually fed by vcc5v0_sys, dependent
++ * on pi6c clock generator
++ */
++ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpio = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie30x1_enable_h>;
++ regulator-name = "vcc3v3_pcie30x1";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_pi6c_05>;
++ };
++
++ vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
++ compatible = "regulator-fixed";
++ enable-active-high;
++ gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie_enable_h>;
++ regulator-name = "vcc3v3_pcie";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc5v0_sys>;
++ };
++};
++
++&pcie2x1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie20_reset_h>;
++ reset-gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
++ status = "okay";
++};
++
++&pcie30phy {
++ data-lanes = <1 2>;
++ status = "okay";
++};
++
++&pcie3x1 {
++ num-lanes = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie30x1m0_pins>;
++ reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pcie30x1>;
++ status = "okay";
++};
++
++&pcie3x2 {
++ num-lanes = <1>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pcie30x2_reset_h>;
++ reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
++ vpcie3v3-supply = <&vcc3v3_pi6c_05>;
++ status = "okay";
++};
++
++&pinctrl {
++ pcie {
++ pcie20_reset_h: pcie20-reset-h {
++ rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ pcie30x1_enable_h: pcie30x1-enable-h {
++ rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ pcie30x2_reset_h: pcie30x2-reset-h {
++ rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ pcie_enable_h: pcie-enable-h {
++ rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ usb {
++ minipcie_enable_h: minipcie-enable-h {
++ rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ ngffpcie_enable_h: ngffpcie-enable-h {
++ rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ vbus_typec_en: vbus_typec_en {
++ rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pwm1 {
++ status = "okay";
++};
++
++&pwm2 {
++ status = "okay";
++};
++
++&pwm12 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&pwm12m1_pins>;
++ status = "okay";
++};
++
++&sdmmc0 {
++ bus-width = <4>;
++ cap-sd-highspeed;
++ cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
++ /* Also used in pcie30x1_clkreqnm0 */
++ disable-wp;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd>;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc3v3_sd>;
++ vqmmc-supply = <&vccio_sd>;
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host0_ohci {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ status = "okay";
++};
++
++&usb_host1_ehci {
++ status = "okay";
++};
++
++&usb_host1_ohci {
++ status = "okay";
++};
++
++&usb2phy0_otg {
++ phy-supply = <&vbus_typec>;
++ status = "okay";
++};
++
++&usb2phy1_host {
++ phy-supply = <&vcc3v3_minipcie>;
++ status = "okay";
++};
++
++&usb2phy1_otg {
++ phy-supply = <&vcc3v3_ngff>;
++ status = "okay";
++};
--- /dev/null
+From c80992abd2877590059e9cb254213c16824e2106 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Wed, 18 Jan 2023 13:34:53 +0530
+Subject: [PATCH] arm64: dts: rockchip: Update eMMC, SD aliases for Radxa SoM
+ boards
+
+Radxa has produced Compute Modules like RK3399pro VMARC and CM3i with
+onboarding eMMC flash, so the eMMC is the primary MMC device.
+
+On the other hand, Rockchip boot orders start from eMMC from an MMC
+device perspective.
+
+Mark, the eMMC has mmc0 to satisfy the above two conditions.
+
+Reported-by: FUKAUMI Naoki <naoki@radxa.com>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230118080454.11643-1-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 4 ++--
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 3 +--
+ 2 files changed, 3 insertions(+), 4 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi
+@@ -13,8 +13,8 @@
+ compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
+
+ aliases {
+- mmc0 = &sdmmc;
+- mmc1 = &sdhci;
++ mmc0 = &sdhci;
++ mmc1 = &sdmmc;
+ };
+
+ vcc3v3_pcie: vcc-pcie-regulator {
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -8,8 +8,7 @@
+ compatible = "radxa,e25", "rockchip,rk3568";
+
+ aliases {
+- mmc0 = &sdmmc0;
+- mmc1 = &sdhci;
++ mmc1 = &sdmmc0;
+ };
+
+ pwm-leds {
--- /dev/null
+From c4d2b02d63ee38b381fbc886c02eecfec4f981cc Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Mon, 23 Jan 2023 12:46:51 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add missing CM3i fallback compatible
+ for Radxa E25
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+In order to function the Radxa E25 Carrier board, it is mandatory to
+mount the Radxa CM3i module.
+
+Add Radxa CM3i compatible as fallback compatible to string to satisfy
+the Module and Carrier board topology.
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Cc: Chukun Pan <amadeus@jmu.edu.cn>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230123071654.73139-2-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -5,7 +5,7 @@
+
+ / {
+ model = "Radxa E25";
+- compatible = "radxa,e25", "rockchip,rk3568";
++ compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
+
+ aliases {
+ mmc1 = &sdmmc0;
--- /dev/null
+From ef9134d9bbce071c9e4ebdcbb6f8fb1a5dd0a67e Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Mon, 23 Jan 2023 12:46:53 +0530
+Subject: [PATCH] arm64: dts: rockchip: Correct the model name for Radxa E25
+
+Radxa E25 is a Carrier board, so update the model name for Radxa E25
+as suggested by the Radxa website.
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Cc: Chukun Pan <amadeus@jmu.edu.cn>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230123071654.73139-4-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -4,7 +4,7 @@
+ #include "rk3568-radxa-cm3i.dtsi"
+
+ / {
+- model = "Radxa E25";
++ model = "Radxa E25 Carrier Board";
+ compatible = "radxa,e25", "radxa,cm3i", "rockchip,rk3568";
+
+ aliases {
--- /dev/null
+From a87852e37f782257ebc57cc44a0d3fbf806471f6 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas@kwiboo.se>
+Date: Mon, 24 Jul 2023 14:52:16 +0000
+Subject: [PATCH] arm64: dts: rockchip: Fix PCIe regulators on Radxa E25
+
+Despite its name, the regulator vcc3v3_pcie30x1 has nothing to do with
+pcie30x1. Instead, it supply power to VBAT1-5 on the M.2 KEY B port as
+seen on page 8 of the schematic [1].
+
+pcie30x1 is used for the mini PCIe slot, and as seen on page 9 the
+vcc3v3_minipcie regulator is instead related to pcie30x1.
+
+The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
+
+Use correct regulator vcc3v3_minipcie for pcie30x1.
+
+[1] https://dl.radxa.com/cm3p/e25/radxa-e25-v1.4-sch.pdf
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 16 ++++++++--------
+ 1 file changed, 8 insertions(+), 8 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -47,6 +47,9 @@
+ vin-supply = <&vcc5v0_sys>;
+ };
+
++ /* actually fed by vcc5v0_sys, dependent
++ * on pi6c clock generator
++ */
+ vcc3v3_minipcie: vcc3v3-minipcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+@@ -54,9 +57,9 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&minipcie_enable_h>;
+ regulator-name = "vcc3v3_minipcie";
+- regulator-min-microvolt = <5000000>;
+- regulator-max-microvolt = <5000000>;
+- vin-supply = <&vcc5v0_sys>;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_pi6c_05>;
+ };
+
+ vcc3v3_ngff: vcc3v3-ngff-regulator {
+@@ -71,9 +74,6 @@
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+- /* actually fed by vcc5v0_sys, dependent
+- * on pi6c clock generator
+- */
+ vcc3v3_pcie30x1: vcc3v3-pcie30x1-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+@@ -83,7 +83,7 @@
+ regulator-name = "vcc3v3_pcie30x1";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+- vin-supply = <&vcc3v3_pi6c_05>;
++ vin-supply = <&vcc5v0_sys>;
+ };
+
+ vcc3v3_pi6c_05: vcc3v3-pi6c-05-regulator {
+@@ -117,7 +117,7 @@
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie30x1m0_pins>;
+ reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+- vpcie3v3-supply = <&vcc3v3_pcie30x1>;
++ vpcie3v3-supply = <&vcc3v3_minipcie>;
+ status = "okay";
+ };
+
--- /dev/null
+From 2bdfe84fbd57a4ed9fd65a67210442559ce078f0 Mon Sep 17 00:00:00 2001
+From: Jonas Karlman <jonas@kwiboo.se>
+Date: Mon, 24 Jul 2023 14:52:16 +0000
+Subject: [PATCH] arm64: dts: rockchip: Enable SATA on Radxa E25
+
+The M.2 KEY B port can be used for WWAN USB2 modules or SATA drives.
+
+Enable sata1 node to fix use of SATA drives on the M.2 slot.
+
+Fixes: 2bf2f4d9f673 ("arm64: dts: rockchip: Add Radxa CM3I E25")
+Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
+Link: https://lore.kernel.org/r/20230724145213.3833099-1-jonas@kwiboo.se
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -99,6 +99,10 @@
+ };
+ };
+
++&combphy1 {
++ phy-supply = <&vcc3v3_pcie30x1>;
++};
++
+ &pcie2x1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie20_reset_h>;
+@@ -178,6 +182,10 @@
+ status = "okay";
+ };
+
++&sata1 {
++ status = "okay";
++};
++
+ &sdmmc0 {
+ bus-width = <4>;
+ cap-sd-highspeed;
--- /dev/null
+From 437644753208092f642b7669c69da606aa07dfb4 Mon Sep 17 00:00:00 2001
+From: Tim Lunn <tim@feathertop.org>
+Date: Wed, 14 Feb 2024 15:07:30 +1100
+Subject: [PATCH] arm64: dts: rockchip: adjust vendor on Banana Pi R2 Pro board
+
+Adjust compatible string to match the board vendor of Sinovoip
+
+Signed-off-by: Tim Lunn <tim@feathertop.org>
+Reviewed-by: Dragan Simic <dsimic@manjaro.org>
+Acked-by: Conor Dooley <conor.dooley@microchip.com>
+Link: https://lore.kernel.org/r/20240214040731.3069111-4-tim@feathertop.org
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+@@ -13,7 +13,7 @@
+
+ / {
+ model = "Bananapi-R2 Pro (RK3568) DDR4 Board";
+- compatible = "rockchip,rk3568-bpi-r2pro", "rockchip,rk3568";
++ compatible = "sinovoip,rk3568-bpi-r2pro", "rockchip,rk3568";
+
+ aliases {
+ ethernet0 = &gmac0;
--- /dev/null
+From a2ac2a1b02590a22a236c43c455f421cdede45f5 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
+Date: Thu, 14 Mar 2024 15:24:35 +0300
+Subject: [PATCH] arm64: dts: rockchip: set PHY address of MT7531 switch to
+ 0x1f
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The MT7531 switch listens on PHY address 0x1f on an MDIO bus. I've got two
+findings that support this. There's no bootstrapping option to change the
+PHY address of the switch. The Linux driver hardcodes 0x1f as the PHY
+address of the switch. So the reg property on the device tree is currently
+ignored by the Linux driver.
+
+Therefore, describe the correct PHY address on Banana Pi BPI-R2 Pro that
+has this switch.
+
+Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
+Fixes: c1804463e5c6 ("arm64: dts: rockchip: Add mt7531 dsa node to BPI-R2-Pro board")
+Link: https://lore.kernel.org/r/20240314-for-rockchip-mt7531-phy-address-v1-1-743b5873358f@arinc9.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+@@ -521,9 +521,9 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+- switch@0 {
++ switch@1f {
+ compatible = "mediatek,mt7531";
+- reg = <0>;
++ reg = <0x1f>;
+
+ ports {
+ #address-cells = <1>;
--- /dev/null
+From 433d54818f64a2fe0562f8c04c7a81f562368515 Mon Sep 17 00:00:00 2001
+From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
+Date: Tue, 5 Mar 2024 15:32:18 +0100
+Subject: [PATCH] arm64: dts: rockchip: regulator for sd needs to be always on
+ for BPI-R2Pro
+
+With default dts configuration for BPI-R2Pro, the regulator for sd card is
+powered off when reboot is commanded, and the only solution to detect the
+sd card again, and therefore, allow rebooting from there, is to do a
+hardware reset.
+
+Configure the regulator for sd to be always on for BPI-R2Pro in order to
+avoid this issue.
+
+Fixes: f901aaadaa2a ("arm64: dts: rockchip: Add Bananapi R2 Pro")
+Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
+Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-bpi-r2-pro.dts
+@@ -412,6 +412,8 @@
+
+ vccio_sd: LDO_REG5 {
+ regulator-name = "vccio_sd";
++ regulator-always-on;
++ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
--- /dev/null
+From 6731d2c9039fbe1ecf21915eab3acee0a999508a Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Fri, 10 Jul 2020 21:38:20 +0200
+Subject: [PATCH] rockchip: use system LED for OpenWrt
+
+Use the SYS LED on the casing for showing system status.
+
+This patch is kept separate from the NanoPi R2S support patch, as i plan
+on submitting the device support upstream.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 9 ++++++++-
+ 1 file changed, 8 insertions(+), 1 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+@@ -6,6 +6,7 @@
+ /dts-v1/;
+
+ #include <dt-bindings/input/input.h>
++#include <dt-bindings/leds/common.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include "rk3328.dtsi"
+
+@@ -16,6 +17,11 @@
+ aliases {
+ ethernet1 = &rtl8153;
+ mmc0 = &sdmmc;
++
++ led-boot = &sys_led;
++ led-failsafe = &sys_led;
++ led-running = &sys_led;
++ led-upgrade = &sys_led;
+ };
+
+ chosen {
+@@ -48,19 +54,22 @@
+ pinctrl-names = "default";
+
+ lan_led: led-0 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_LAN;
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+- label = "nanopi-r2s:green:lan";
+ };
+
+ sys_led: led-1 {
++ color = <LED_COLOR_ID_RED>;
++ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+- label = "nanopi-r2s:red:sys";
+ default-state = "on";
+ };
+
+ wan_led: led-2 {
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_WAN;
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+- label = "nanopi-r2s:green:wan";
+ };
+ };
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+@@ -13,6 +13,11 @@
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &emmc;
++
++ led-boot = &power_led;
++ led-failsafe = &power_led;
++ led-running = &power_led;
++ led-upgrade = &power_led;
+ };
+
+ chosen {
--- /dev/null
+From 2795c8b31a686bdb8338f9404d18ef7a154f0d75 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sun, 26 Jul 2020 13:32:59 +0200
+Subject: [PATCH] arm64: rockchip: add OF node for USB eth on NanoPi R2S
+
+This adds the OF node for the USB3 ethernet adapter on the FriendlyARM
+NanoPi R2S. Add the correct value for the RTL8153 LED configuration
+register to match the blink behavior of the other port on the device.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
+ 1 file changed, 1 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
+@@ -406,6 +406,7 @@
+ rtl8153: device@2 {
+ compatible = "usbbda,8153";
+ reg = <2>;
++ realtek,led-data = <0x87>;
+ };
+ };
+
--- /dev/null
+From: David Bauer <mail@david-bauer.net>
+Subject: arm64: dts: rockchip: disable UHS modes for NanoPi R4S
+
+The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting
+while U-Boot requires the card to be in 3.3V mode.
+
+Remove UHS support from the SD controller so the card remains in 3.3V
+mode. This reduces transfer speeds but ensures a reboot whether from
+userspace or following a kernel panic is always working.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts
+@@ -335,7 +335,6 @@
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+- sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
+ vqmmc-supply = <&vcc_sdio>;
+ status = "okay";
+--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+@@ -112,6 +112,11 @@
+ status = "disabled";
+ };
+
++&sdmmc {
++ /delete-property/ sd-uhs-sdr104;
++ cap-sd-highspeed;
++};
++
+ &u2phy0_host {
+ phy-supply = <&vdd_5v>;
+ };
--- /dev/null
+--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+@@ -19,6 +19,13 @@
+ model = "FriendlyElec NanoPi R4S";
+ compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
+
++ aliases {
++ led-boot = &sys_led;
++ led-failsafe = &sys_led;
++ led-running = &sys_led;
++ led-upgrade = &sys_led;
++ };
++
+ /delete-node/ display-subsystem;
+
+ gpio-leds {
--- /dev/null
+From d2166e3b3680bd2b206aebf1e1ce4c0d346f3c50 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Fri, 19 May 2023 12:10:52 +0800
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Orange Pi R1
+ Plus
+
+Add OpenWrt's LED aliases for showing system status.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+---
+ .../dts/rockchip/rk3328-orangepi-r1-plus.dts | 17 +++++++++--------
+ 1 file changed, 9 insertions(+), 8 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+@@ -17,6 +17,11 @@
+ aliases {
+ ethernet1 = &rtl8153;
+ mmc0 = &sdmmc;
++
++ led-boot = &status_led;
++ led-failsafe = &status_led;
++ led-running = &status_led;
++ led-upgrade = &status_led;
+ };
+
+ chosen {
+@@ -41,11 +46,10 @@
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ };
+
+- led-1 {
++ status_led: led-1 {
+ function = LED_FUNCTION_STATUS;
+ color = <LED_COLOR_ID_RED>;
+ gpios = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
+- linux,default-trigger = "heartbeat";
+ };
+
+ led-2 {
--- /dev/null
+From b46a530d12ada422b9d5b2b97059e0d3ed950b40 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Fri, 19 May 2023 12:38:04 +0800
+Subject: [PATCH] arm64: dts: rockchip: add LED configuration to Orange Pi R1
+ Plus
+
+Add the correct value for the RTL8153 LED configuration register to
+match the blink behavior of the other port on the device.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+---
+ arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3328-orangepi-r1-plus.dts
+@@ -365,6 +365,7 @@
+ rtl8153: device@2 {
+ compatible = "usbbda,8153";
+ reg = <2>;
++ realtek,led-data = <0x87>;
+ };
+ };
+
--- /dev/null
+--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts
+@@ -15,6 +15,13 @@
+ model = "FriendlyElec NanoPC-T4";
+ compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
+
++ aliases {
++ led-boot = &status_led;
++ led-failsafe = &status_led;
++ led-running = &status_led;
++ led-upgrade = &status_led;
++ };
++
+ vcc12v0_sys: vcc12v0-sys {
+ compatible = "regulator-fixed";
+ regulator-always-on;
--- /dev/null
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Tianling Shen <cnsztl@gmail.com>
+Date: Tue Jun 20 16:45:27 2023 +0800
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for NanoPi R5
+ series
+
+Add OpenWrt's LED aliases for showing system status.
+
+Signed-off-by: Tianling Shen <cnsztl@gmail.com>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5c.dts
+@@ -40,7 +40,6 @@
+ power_led: led-power {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+- linux,default-trigger = "heartbeat";
+ gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
+ };
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dts
+@@ -39,7 +39,6 @@
+ power_led: led-power {
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+- linux,default-trigger = "heartbeat";
+ gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
+ };
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+@@ -18,6 +18,11 @@
+ aliases {
+ mmc0 = &sdmmc0;
+ mmc1 = &sdhci;
++
++ led-boot = &power_led;
++ led-failsafe = &power_led;
++ led-running = &power_led;
++ led-upgrade = &power_led;
+ };
+
+ chosen: chosen {
--- /dev/null
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Marius Durbaca <mariusd84@gmail.com>
+Date: Tue Feb 20 15:05:27 2024 +0200
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa
+CM3 IO board
+
+Add OpenWrt's LED aliases for showing system status.
+
+Suggested-by: Tianling Shen <cnsztl@immortalwrt.org>
+Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -16,6 +16,10 @@
+ aliases {
+ ethernet0 = &gmac1;
+ mmc1 = &sdmmc0;
++ led-boot = &status_led;
++ led-failsafe = &status_led;
++ led-running = &status_led;
++ led-upgrade = &status_led;
+ };
+
+ chosen: chosen {
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -17,7 +17,7 @@
+ leds {
+ compatible = "gpio-leds";
+
+- led-0 {
++ status_led: led-0 {
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
--- /dev/null
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Marius Durbaca <mariusd84@gmail.com>
+Date: Tue Feb 27 16:25:27 2024 +0200
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa
+E25
+
+Add OpenWrt's LED aliases for showing system status.
+
+Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3568-radxa-e25.dts
+@@ -9,6 +9,10 @@
+
+ aliases {
+ mmc1 = &sdmmc0;
++ led-boot = &led_user;
++ led-failsafe = &led_user;
++ led-running = &led_user;
++ led-upgrade = &led_user;
+ };
+
+ pwm-leds {
--- /dev/null
+From patchwork Sat Nov 12 14:10:58 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Aurelien Jarno <aurelien@aurel32.net>
+X-Patchwork-Id: 13041222
+Return-Path:
+ <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org>
+X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
+ aws-us-west-2-korg-lkml-1.web.codeaurora.org
+From: Aurelien Jarno <aurelien@aurel32.net>
+To: Olivia Mackall <olivia@selenic.com>,
+ Herbert Xu <herbert@gondor.apana.org.au>,
+ Rob Herring <robh+dt@kernel.org>,
+ Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
+ Heiko Stuebner <heiko@sntech.de>,
+ Philipp Zabel <p.zabel@pengutronix.de>,
+ Lin Jinhan <troy.lin@rock-chips.com>
+Cc: linux-crypto@vger.kernel.org (open list:HARDWARE RANDOM NUMBER GENERATOR
+ CORE),
+ devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE
+ BINDINGS),
+ linux-arm-kernel@lists.infradead.org (moderated list:ARM/Rockchip SoC
+ support),
+ linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC support),
+ linux-kernel@vger.kernel.org (open list),
+ Aurelien Jarno <aurelien@aurel32.net>
+Subject: [PATCH v1 2/3] hwrng: add Rockchip SoC hwrng driver
+Date: Sat, 12 Nov 2022 15:10:58 +0100
+Message-Id: <20221112141059.3802506-3-aurelien@aurel32.net>
+In-Reply-To: <20221112141059.3802506-1-aurelien@aurel32.net>
+References: <20221112141059.3802506-1-aurelien@aurel32.net>
+MIME-Version: 1.0
+List-Id: <linux-arm-kernel.lists.infradead.org>
+
+Rockchip SoCs used to have a random number generator as part of their
+crypto device, and support for it has to be added to the corresponding
+driver. However newer Rockchip SoCs like the RK356x have an independent
+True Random Number Generator device. This patch adds a driver for it,
+greatly inspired from the downstream driver.
+
+The TRNG device does not seem to have a signal conditionner and the FIPS
+140-2 test returns a lot of failures. They can be reduced by increasing
+RK_RNG_SAMPLE_CNT, in a tradeoff between quality and speed. This value
+has been adjusted to get ~90% of successes and the quality value has
+been set accordingly.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+---
+ drivers/char/hw_random/Kconfig | 14 ++
+ drivers/char/hw_random/Makefile | 1 +
+ drivers/char/hw_random/rockchip-rng.c | 251 ++++++++++++++++++++++++++
+ 3 files changed, 266 insertions(+)
+ create mode 100644 drivers/char/hw_random/rockchip-rng.c
+
+--- a/drivers/char/hw_random/Kconfig
++++ b/drivers/char/hw_random/Kconfig
+@@ -549,6 +549,20 @@ config HW_RANDOM_CN10K
+ To compile this driver as a module, choose M here.
+ The module will be called cn10k_rng. If unsure, say Y.
+
++config HW_RANDOM_ROCKCHIP
++ tristate "Rockchip True Random Number Generator"
++ depends on HW_RANDOM && (ARCH_ROCKCHIP || COMPILE_TEST)
++ depends on HAS_IOMEM
++ default HW_RANDOM
++ help
++ This driver provides kernel-side support for the True Random Number
++ Generator hardware found on some Rockchip SoC like RK3566 or RK3568.
++
++ To compile this driver as a module, choose M here: the
++ module will be called rockchip-rng.
++
++ If unsure, say Y.
++
+ endif # HW_RANDOM
+
+ config UML_RANDOM
+--- a/drivers/char/hw_random/Makefile
++++ b/drivers/char/hw_random/Makefile
+@@ -47,3 +47,4 @@ obj-$(CONFIG_HW_RANDOM_XIPHERA) += xiphe
+ obj-$(CONFIG_HW_RANDOM_ARM_SMCCC_TRNG) += arm_smccc_trng.o
+ obj-$(CONFIG_HW_RANDOM_CN10K) += cn10k-rng.o
+ obj-$(CONFIG_HW_RANDOM_POLARFIRE_SOC) += mpfs-rng.o
++obj-$(CONFIG_HW_RANDOM_ROCKCHIP) += rockchip-rng.o
+--- /dev/null
++++ b/drivers/char/hw_random/rockchip-rng.c
+@@ -0,0 +1,251 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * rockchip-rng.c True Random Number Generator driver for Rockchip SoCs
++ *
++ * Copyright (c) 2018, Fuzhou Rockchip Electronics Co., Ltd.
++ * Copyright (c) 2022, Aurelien Jarno
++ * Authors:
++ * Lin Jinhan <troy.lin@rock-chips.com>
++ * Aurelien Jarno <aurelien@aurel32.net>
++ */
++#include <linux/clk.h>
++#include <linux/hw_random.h>
++#include <linux/io.h>
++#include <linux/iopoll.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/of_platform.h>
++#include <linux/pm_runtime.h>
++#include <linux/reset.h>
++#include <linux/slab.h>
++
++#define RK_RNG_AUTOSUSPEND_DELAY 100
++#define RK_RNG_MAX_BYTE 32
++#define RK_RNG_POLL_PERIOD_US 100
++#define RK_RNG_POLL_TIMEOUT_US 10000
++
++/*
++ * TRNG collects osc ring output bit every RK_RNG_SAMPLE_CNT time. The value is
++ * a tradeoff between speed and quality and has been adjusted to get a quality
++ * of ~900 (~90% of FIPS 140-2 successes).
++ */
++#define RK_RNG_SAMPLE_CNT 1000
++
++/* TRNG registers from RK3568 TRM-Part2, section 5.4.1 */
++#define TRNG_RST_CTL 0x0004
++#define TRNG_RNG_CTL 0x0400
++#define TRNG_RNG_CTL_LEN_64_BIT (0x00 << 4)
++#define TRNG_RNG_CTL_LEN_128_BIT (0x01 << 4)
++#define TRNG_RNG_CTL_LEN_192_BIT (0x02 << 4)
++#define TRNG_RNG_CTL_LEN_256_BIT (0x03 << 4)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_0 (0x00 << 2)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_1 (0x01 << 2)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_2 (0x02 << 2)
++#define TRNG_RNG_CTL_OSC_RING_SPEED_3 (0x03 << 2)
++#define TRNG_RNG_CTL_ENABLE BIT(1)
++#define TRNG_RNG_CTL_START BIT(0)
++#define TRNG_RNG_SAMPLE_CNT 0x0404
++#define TRNG_RNG_DOUT_0 0x0410
++#define TRNG_RNG_DOUT_1 0x0414
++#define TRNG_RNG_DOUT_2 0x0418
++#define TRNG_RNG_DOUT_3 0x041c
++#define TRNG_RNG_DOUT_4 0x0420
++#define TRNG_RNG_DOUT_5 0x0424
++#define TRNG_RNG_DOUT_6 0x0428
++#define TRNG_RNG_DOUT_7 0x042c
++
++struct rk_rng {
++ struct hwrng rng;
++ void __iomem *base;
++ struct reset_control *rst;
++ int clk_num;
++ struct clk_bulk_data *clk_bulks;
++};
++
++/* The mask determine the bits that are updated */
++static void rk_rng_write_ctl(struct rk_rng *rng, u32 val, u32 mask)
++{
++ writel_relaxed((mask << 16) | val, rng->base + TRNG_RNG_CTL);
++}
++
++static int rk_rng_init(struct hwrng *rng)
++{
++ struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
++ u32 reg;
++ int ret;
++
++ /* start clocks */
++ ret = clk_bulk_prepare_enable(rk_rng->clk_num, rk_rng->clk_bulks);
++ if (ret < 0) {
++ dev_err((struct device *) rk_rng->rng.priv,
++ "Failed to enable clks %d\n", ret);
++ return ret;
++ }
++
++ /* set the sample period */
++ writel(RK_RNG_SAMPLE_CNT, rk_rng->base + TRNG_RNG_SAMPLE_CNT);
++
++ /* set osc ring speed and enable it */
++ reg = TRNG_RNG_CTL_LEN_256_BIT |
++ TRNG_RNG_CTL_OSC_RING_SPEED_0 |
++ TRNG_RNG_CTL_ENABLE;
++ rk_rng_write_ctl(rk_rng, reg, 0xffff);
++
++ return 0;
++}
++
++static void rk_rng_cleanup(struct hwrng *rng)
++{
++ struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
++ u32 reg;
++
++ /* stop TRNG */
++ reg = 0;
++ rk_rng_write_ctl(rk_rng, reg, 0xffff);
++
++ /* stop clocks */
++ clk_bulk_disable_unprepare(rk_rng->clk_num, rk_rng->clk_bulks);
++}
++
++static int rk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
++{
++ struct rk_rng *rk_rng = container_of(rng, struct rk_rng, rng);
++ u32 reg;
++ int ret = 0;
++ int i;
++
++ pm_runtime_get_sync((struct device *) rk_rng->rng.priv);
++
++ /* Start collecting random data */
++ reg = TRNG_RNG_CTL_START;
++ rk_rng_write_ctl(rk_rng, reg, reg);
++
++ ret = readl_poll_timeout(rk_rng->base + TRNG_RNG_CTL, reg,
++ !(reg & TRNG_RNG_CTL_START),
++ RK_RNG_POLL_PERIOD_US,
++ RK_RNG_POLL_TIMEOUT_US);
++ if (ret < 0)
++ goto out;
++
++ /* Read random data stored in big endian in the registers */
++ ret = min_t(size_t, max, RK_RNG_MAX_BYTE);
++ for (i = 0; i < ret; i += 4) {
++ reg = readl_relaxed(rk_rng->base + TRNG_RNG_DOUT_0 + i);
++ *(u32 *)(buf + i) = be32_to_cpu(reg);
++ }
++
++out:
++ pm_runtime_mark_last_busy((struct device *) rk_rng->rng.priv);
++ pm_runtime_put_sync_autosuspend((struct device *) rk_rng->rng.priv);
++
++ return ret;
++}
++
++static int rk_rng_probe(struct platform_device *pdev)
++{
++ struct device *dev = &pdev->dev;
++ struct rk_rng *rk_rng;
++ int ret;
++
++ rk_rng = devm_kzalloc(dev, sizeof(struct rk_rng), GFP_KERNEL);
++ if (!rk_rng)
++ return -ENOMEM;
++
++ rk_rng->base = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(rk_rng->base))
++ return PTR_ERR(rk_rng->base);
++
++ rk_rng->clk_num = devm_clk_bulk_get_all(dev, &rk_rng->clk_bulks);
++ if (rk_rng->clk_num < 0)
++ return dev_err_probe(dev, rk_rng->clk_num,
++ "Failed to get clks property\n");
++
++ rk_rng->rst = devm_reset_control_array_get(&pdev->dev, false, false);
++ if (IS_ERR(rk_rng->rst))
++ return dev_err_probe(dev, PTR_ERR(rk_rng->rst),
++ "Failed to get reset property\n");
++
++ reset_control_assert(rk_rng->rst);
++ udelay(2);
++ reset_control_deassert(rk_rng->rst);
++
++ platform_set_drvdata(pdev, rk_rng);
++
++ rk_rng->rng.name = dev_driver_string(dev);
++#ifndef CONFIG_PM
++ rk_rng->rng.init = rk_rng_init;
++ rk_rng->rng.cleanup = rk_rng_cleanup;
++#endif
++ rk_rng->rng.read = rk_rng_read;
++ rk_rng->rng.priv = (unsigned long) dev;
++ rk_rng->rng.quality = 900;
++
++ pm_runtime_set_autosuspend_delay(dev, RK_RNG_AUTOSUSPEND_DELAY);
++ pm_runtime_use_autosuspend(dev);
++ pm_runtime_enable(dev);
++
++ ret = devm_hwrng_register(dev, &rk_rng->rng);
++ if (ret)
++ return dev_err_probe(&pdev->dev, ret, "Failed to register Rockchip hwrng\n");
++
++ dev_info(&pdev->dev, "Registered Rockchip hwrng\n");
++
++ return 0;
++}
++
++static int rk_rng_remove(struct platform_device *pdev)
++{
++ pm_runtime_disable(&pdev->dev);
++
++ return 0;
++}
++
++#ifdef CONFIG_PM
++static int rk_rng_runtime_suspend(struct device *dev)
++{
++ struct rk_rng *rk_rng = dev_get_drvdata(dev);
++
++ rk_rng_cleanup(&rk_rng->rng);
++
++ return 0;
++}
++
++static int rk_rng_runtime_resume(struct device *dev)
++{
++ struct rk_rng *rk_rng = dev_get_drvdata(dev);
++
++ return rk_rng_init(&rk_rng->rng);
++}
++#endif
++
++static const struct dev_pm_ops rk_rng_pm_ops = {
++ SET_RUNTIME_PM_OPS(rk_rng_runtime_suspend,
++ rk_rng_runtime_resume, NULL)
++ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
++ pm_runtime_force_resume)
++};
++
++static const struct of_device_id rk_rng_dt_match[] = {
++ {
++ .compatible = "rockchip,rk3568-rng",
++ },
++ {},
++};
++
++MODULE_DEVICE_TABLE(of, rk_rng_dt_match);
++
++static struct platform_driver rk_rng_driver = {
++ .driver = {
++ .name = "rockchip-rng",
++ .pm = &rk_rng_pm_ops,
++ .of_match_table = rk_rng_dt_match,
++ },
++ .probe = rk_rng_probe,
++ .remove = rk_rng_remove,
++};
++
++module_platform_driver(rk_rng_driver);
++
++MODULE_DESCRIPTION("Rockchip True Random Number Generator driver");
++MODULE_AUTHOR("Lin Jinhan <troy.lin@rock-chips.com>, Aurelien Jarno <aurelien@aurel32.net>");
++MODULE_LICENSE("GPL v2");
--- /dev/null
+From patchwork Sat Nov 12 14:10:59 2022
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+X-Patchwork-Submitter: Aurelien Jarno <aurelien@aurel32.net>
+X-Patchwork-Id: 13041221
+From: Aurelien Jarno <aurelien@aurel32.net>
+To: Olivia Mackall <olivia@selenic.com>,
+ Herbert Xu <herbert@gondor.apana.org.au>,
+ Rob Herring <robh+dt@kernel.org>,
+ Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
+ Heiko Stuebner <heiko@sntech.de>,
+ Philipp Zabel <p.zabel@pengutronix.de>,
+ Lin Jinhan <troy.lin@rock-chips.com>
+Cc: linux-crypto@vger.kernel.org (open list:HARDWARE RANDOM NUMBER GENERATOR
+ CORE),
+ devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE
+ BINDINGS),
+ linux-arm-kernel@lists.infradead.org (moderated list:ARM/Rockchip SoC
+ support),
+ linux-rockchip@lists.infradead.org (open list:ARM/Rockchip SoC support),
+ linux-kernel@vger.kernel.org (open list),
+ Aurelien Jarno <aurelien@aurel32.net>
+Subject: [PATCH v1 3/3] arm64: dts: rockchip: add DT entry for RNG to RK356x
+Date: Sat, 12 Nov 2022 15:10:59 +0100
+Message-Id: <20221112141059.3802506-4-aurelien@aurel32.net>
+In-Reply-To: <20221112141059.3802506-1-aurelien@aurel32.net>
+References: <20221112141059.3802506-1-aurelien@aurel32.net>
+MIME-Version: 1.0
+List-Id: <linux-arm-kernel.lists.infradead.org>
+
+Enable the just added Rockchip RNG driver for RK356x SoCs.
+
+Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
+---
+ arch/arm64/boot/dts/rockchip/rk356x.dtsi | 9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+@@ -1773,6 +1773,15 @@
+ };
+ };
+
++ rng: rng@fe388000 {
++ compatible = "rockchip,rk3568-rng";
++ reg = <0x0 0xfe388000 0x0 0x4000>;
++ clocks = <&cru CLK_TRNG_NS>, <&cru HCLK_TRNG_NS>;
++ clock-names = "trng_clk", "trng_hclk";
++ resets = <&cru SRST_TRNG_NS>;
++ reset-names = "reset";
++ };
++
+ pinctrl: pinctrl {
+ compatible = "rockchip,rk3568-pinctrl";
+ rockchip,grf = <&grf>;
projects / openwrt / openwrt.git / commitdiff