--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2017 Yousong Zhou <yszhou4tech@gmail.com>
+
+include $(TOPDIR)/rules.mk
+
+BOARD:=armsr
+BOARDNAME:=Arm SystemReady (EFI) compliant
+FEATURES:=fpu pci pcie rtc usb boot-part rootfs-part
+FEATURES+=cpiogz ext4 ramdisk squashfs targz vmdk
+
+KERNEL_PATCHVER:=6.1
+
+include $(INCLUDE_DIR)/target.mk
+
+DEFAULT_PACKAGES += mkf2fs e2fsprogs
+# blkid used for resolving PARTUUID
+# in sysupgrade
+DEFAULT_PACKAGES += blkid
+
+$(eval $(call BuildTarget))
--- /dev/null
+This target generates images that can be used on ARM machines with EFI
+support (e.g EDKII/TianoCore or U-Boot with bootefi).
+
+There are two subtargets:
+- armv7 for 32-bit machines
+- armv8 for 64-bit machines
+
+The kernel and filesystem images can also be used directly by QEMU:
+
+Run with qemu-system-arm
+
+ # boot with initramfs embedded in
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armsr-armv7-generic-initramfs-kernel.bin
+
+ # boot with accel=kvm
+ qemu-system-arm -nographic -M virt,accel=kvm -cpu host -m 64 -kernel
+ openwrt-armsr-armv7-generic-initramfs-kernel.bin
+
+ # boot with a separate rootfs
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armsr-armv7-generic-kernel.bin \
+ -drive file=openwrt-armsr-armv7-generic-ext4-rootfs.img,format=raw,if=virtio -append 'root=/dev/vda rootwait'
+
+ # boot with local dir as rootfs
+ qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armsr-armv7-generic-kernel.bin \
+ -fsdev local,id=rootdev,path=root-armsr/,security_model=none \
+ -device virtio-9p-pci,fsdev=rootdev,mount_tag=/dev/root \
+ -append 'rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p'
+
+Run with kvmtool
+
+ # start a named machine
+ lkvm run -k openwrt-armsr-armv7-zImage -i openwrt-armsr-armv7-rootfs.cpio --name armsr0
+
+ # start with virtio-9p rootfs
+ lkvm run -k openwrt-armsr-armv7-zImage -d root-armsr/
+
+ # stop "armsr0"
+ lkvm stop --name armsr0
+
+ # stop all
+ lkvm stop --all
+
+The multi-platform ARMv8 target can be used with QEMU:
+
+ qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic \
+ -kernel openwrt-armsr-armv8-generic-initramfs-kernel.bin \
+
+With a EDKII or U-Boot binary for the QEMU ARM virtual machines, you can use these
+images in EFI mode:
+
+32-bit:
+gunzip -c bin/targets/armsr/armv7/openwrt-armsr-armv7-generic-ext4-combined.img.gz > openwrt-arm-32.img
+qemu-system-arm -nographic \
+ -cpu cortex-a15 -machine virt \
+ -bios QEMU_EFI_32.fd \
+ -smp 1 -m 1024 \
+ -device virtio-rng-pci \
+ -drive file=openwrt-arm-32.img,format=raw,index=0,media=disk \
+ -netdev user,id=testlan -net nic,netdev=testlan \
+ -netdev user,id=testwan -net nic,netdev=testwan
+
+64-bit:
+gunzip -c bin/targets/armsr/armv8/openwrt-armsr-armv8-generic-ext4-combined.img.gz > openwrt-arm-64.img
+qemu-system-aarch64 -nographic \
+ -cpu cortex-a53 -machine virt \
+ -bios QEMU_EFI_64.fd \
+ -smp 1 -m 1024 \
+ -device virtio-rng-pci \
+ -drive file=openwrt-arm-64.img,format=raw,index=0,media=disk \
+ -netdev user,id=testlan -net nic,netdev=testlan \
+ -netdev user,id=testwan -net nic,netdev=testwan
+
+One can find EFI/BIOS binaries from:
+- Compile mainline U-Boot for the QEMU ARM virtual machine (qemu_arm_defconfig/qemu_arm64_defconfig)
+- From distribution packages (such as qemu-efi-arm and qemu-efi-aarch64 in Debian)
+- Community builds, like retrage/edk2-nightly: https://retrage.github.io/edk2-nightly/
--- /dev/null
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_MMAP_RND_BITS=8
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_VIRT=y
+CONFIG_ARM=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_PSCI=y
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DMA_OPS=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HAVE_SMP=y
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_NEON=y
+CONFIG_NR_CPUS=4
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USE_OF=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0
--- /dev/null
+ARCH:=arm
+SUBTARGET:=armv7
+BOARDNAME:=32-bit (armv7) machines
+CPU_TYPE:=cortex-a15
+CPU_SUBTYPE:=neon-vfpv4
+KERNELNAME:=zImage
+
+define Target/Description
+ Build images for $(BOARDNAME)
+endef
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_ACPI_PCC=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_INTEL_SOCFPGA=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_NXP=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_SYNQUACER=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_THUNDER2=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+CONFIG_ARM64_CNP=y
+CONFIG_ARM64_CRYPTO=y
+CONFIG_ARM64_EPAN=y
+CONFIG_ARM64_ERRATUM_1165522=y
+CONFIG_ARM64_ERRATUM_1286807=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_HW_AFDBM=y
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_PTR_AUTH=y
+CONFIG_ARM64_PTR_AUTH_KERNEL=y
+CONFIG_ARM64_SME=y
+CONFIG_ARM64_SVE=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=48
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
+CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
+CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
+# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
+CONFIG_ARMADA_37XX_WATCHDOG=y
+CONFIG_ARMADA_THERMAL=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+# CONFIG_ARM_DMC620_PMU is not set
+# CONFIG_ARM_MHU_V2 is not set
+CONFIG_ARM_SBSA_WATCHDOG=y
+CONFIG_ARM_SMC_WATCHDOG=y
+CONFIG_ARM_SMMU=y
+# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
+# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
+CONFIG_ARM_SMMU_V3=y
+# CONFIG_ARM_SMMU_V3_PMU is not set
+# CONFIG_ARM_SMMU_V3_SVA is not set
+CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+# CONFIG_AXI_DMAC is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BLK_PM=y
+CONFIG_CAVIUM_TX2_ERRATUM_219=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CLK_INTEL_SOCFPGA=y
+CONFIG_CLK_INTEL_SOCFPGA64=y
+CONFIG_CLK_LS1028A_PLLDIG=y
+CONFIG_CLK_PX30=y
+CONFIG_CLK_QORIQ=y
+CONFIG_CLK_RK3308=y
+CONFIG_CLK_RK3328=y
+CONFIG_CLK_RK3368=y
+CONFIG_CLK_RK3399=y
+CONFIG_CLK_RK3568=y
+CONFIG_CLK_SP810=y
+CONFIG_CLK_SUNXI=y
+CONFIG_CLK_SUNXI_CLOCKS=y
+# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
+# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
+# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
+CONFIG_CLK_VEXPRESS_OSC=y
+# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
+# CONFIG_COMMON_CLK_FSL_SAI is not set
+CONFIG_COMMON_CLK_HI3516CV300=y
+CONFIG_COMMON_CLK_HI3519=y
+CONFIG_COMMON_CLK_HI3559A=y
+CONFIG_COMMON_CLK_HI3660=y
+CONFIG_COMMON_CLK_HI3670=y
+CONFIG_COMMON_CLK_HI3798CV200=y
+CONFIG_COMMON_CLK_HI6220=y
+CONFIG_COMMON_CLK_HI655X=y
+CONFIG_COMMON_CLK_ROCKCHIP=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_ZYNQMP=y
+CONFIG_COMMON_RESET_HI3660=y
+CONFIG_COMMON_RESET_HI6220=y
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_PM=y
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_BS=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
+CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
+CONFIG_CRYPTO_BLAKE2S=y
+CONFIG_CRYPTO_CHACHA20=y
+CONFIG_CRYPTO_CHACHA20_NEON=y
+CONFIG_CRYPTO_CRYPTD=y
+# CONFIG_CRYPTO_DEV_ALLWINNER is not set
+# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
+# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
+# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
+# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
+# CONFIG_CRYPTO_DEV_OCTEONTX2_CPT is not set
+# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
+# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
+# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
+CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA256_ARM64=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64=y
+CONFIG_CRYPTO_SIMD=y
+# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
+# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_SUN6I=y
+CONFIG_DRM=y
+CONFIG_DRM_BOCHS=y
+CONFIG_DRM_BRIDGE=y
+CONFIG_DRM_GEM_SHMEM_HELPER=y
+CONFIG_DRM_KMS_HELPER=y
+CONFIG_DRM_PANEL=y
+CONFIG_DRM_PANEL_BRIDGE=y
+CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
+CONFIG_DRM_QXL=y
+# CONFIG_DRM_ROCKCHIP is not set
+CONFIG_DRM_TTM=y
+CONFIG_DRM_TTM_HELPER=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_DRM_VRAM_HELPER=y
+# CONFIG_DWMAC_SUN8I is not set
+# CONFIG_DWMAC_SUNXI is not set
+CONFIG_DW_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_XILINX is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FRAME_WARN=2048
+# CONFIG_FSL_DPAA is not set
+# CONFIG_FSL_DPAA2_QDMA is not set
+CONFIG_FSL_ERRATUM_A008585=y
+# CONFIG_FSL_IMX8_DDR_PMU is not set
+# CONFIG_FSL_PQ_MDIO is not set
+CONFIG_FUJITSU_ERRATUM_010001=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+# CONFIG_GIANFAR is not set
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_MPC8XXX=y
+CONFIG_GPIO_ROCKCHIP=y
+CONFIG_GPIO_THUNDERX=y
+CONFIG_GPIO_XLP=y
+CONFIG_GPIO_ZYNQ=y
+CONFIG_GPIO_ZYNQMP_MODEPIN=y
+CONFIG_HDMI=y
+CONFIG_HI3660_MBOX=y
+CONFIG_HI6220_MBOX=y
+CONFIG_HISILICON_LPC=y
+CONFIG_HISI_PMU=y
+CONFIG_HISI_THERMAL=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
+# CONFIG_HW_RANDOM_HISI is not set
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C=y
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALTERA=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_HIX5HD2 is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_SLAVE_TESTUNIT is not set
+CONFIG_I2C_SYNQUACER=y
+CONFIG_I2C_THUNDERX=y
+# CONFIG_I2C_XLP9XX is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+# CONFIG_IMX2_WDT is not set
+# CONFIG_INPUT_HISI_POWERKEY is not set
+# CONFIG_INPUT_IBM_PANEL is not set
+# CONFIG_INTEL_STRATIX10_RSU is not set
+# CONFIG_INTEL_STRATIX10_SERVICE is not set
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
+CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
+CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_DART is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
+CONFIG_IOMMU_SUPPORT=y
+# CONFIG_K3_DMA is not set
+CONFIG_KCMP=y
+# CONFIG_KEYBOARD_SUN4I_LRADC is not set
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_PLATFORM is not set
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MARVELL_10G_PHY=y
+# CONFIG_MARVELL_CN10K_DDR_PMU is not set
+# CONFIG_MARVELL_CN10K_TAD_PMU is not set
+CONFIG_MDIO_SUN4I=y
+# CONFIG_MFD_ALTERA_A10SR is not set
+CONFIG_MFD_ALTERA_SYSMGR=y
+# CONFIG_MFD_AXP20X_RSB is not set
+CONFIG_MFD_CORE=y
+CONFIG_MFD_HI655X_PMIC=y
+# CONFIG_MFD_KHADAS_MCU is not set
+CONFIG_MFD_SUN4I_GPADC=y
+# CONFIG_MFD_SUN6I_PRCM is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MFD_VEXPRESS_SYSREG=y
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_CAVIUM_THUNDERX=y
+CONFIG_MMC_DW=y
+# CONFIG_MMC_DW_BLUEFIELD is not set
+# CONFIG_MMC_DW_EXYNOS is not set
+# CONFIG_MMC_DW_HI3798CV200 is not set
+# CONFIG_MMC_DW_K3 is not set
+# CONFIG_MMC_DW_PCI is not set
+CONFIG_MMC_DW_PLTFM=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_RICOH_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MVNETA is not set
+# CONFIG_MVPP2 is not set
+# CONFIG_MV_XOR is not set
+CONFIG_NEED_SG_DMA_LENGTH=y
+# CONFIG_NET_VENDOR_ALLWINNER is not set
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=64
+CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
+# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
+CONFIG_NVMEM_ROCKCHIP_EFUSE=y
+# CONFIG_NVMEM_ROCKCHIP_OTP is not set
+# CONFIG_NVMEM_SUNXI_SID is not set
+# CONFIG_NVMEM_ZYNQMP is not set
+CONFIG_PCC=y
+CONFIG_PCIE_HISI_STB=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_PCIE_MOBIVEIL_PLAT=y
+CONFIG_PCIE_ROCKCHIP=y
+# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
+CONFIG_PCIE_ROCKCHIP_HOST=y
+CONFIG_PCIE_XILINX_CPM=y
+CONFIG_PCIE_XILINX_NWL=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCI_LAYERSCAPE=y
+# CONFIG_PHY_FSL_LYNX_28G is not set
+CONFIG_PHY_HI3660_USB=y
+CONFIG_PHY_HI3670_PCIE=y
+CONFIG_PHY_HI3670_USB=y
+CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_HISI_INNO_USB2=y
+# CONFIG_PHY_HISTB_COMBPHY is not set
+CONFIG_PHY_MVEBU_A3700_COMPHY=y
+CONFIG_PHY_MVEBU_A3700_UTMI=y
+CONFIG_PHY_MVEBU_A38X_COMPHY=y
+CONFIG_PHY_MVEBU_CP110_COMPHY=y
+# CONFIG_PHY_ROCKCHIP_DP is not set
+# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
+CONFIG_PHY_ROCKCHIP_EMMC=y
+# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
+# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+# CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY is not set
+CONFIG_PHY_ROCKCHIP_PCIE=y
+CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
+# CONFIG_PHY_ROCKCHIP_USB is not set
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_SUN50I_USB3=y
+# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
+CONFIG_PHY_SUN9I_USB=y
+# CONFIG_PHY_XILINX_ZYNQMP is not set
+CONFIG_PINCTRL_ROCKCHIP=y
+# CONFIG_PINCTRL_SUN20I_D1 is not set
+CONFIG_PINCTRL_SUN4I_A10=y
+CONFIG_PINCTRL_SUN50I_A100=y
+CONFIG_PINCTRL_SUN50I_A100_R=y
+CONFIG_PINCTRL_SUN50I_A64=y
+CONFIG_PINCTRL_SUN50I_A64_R=y
+CONFIG_PINCTRL_SUN50I_H5=y
+CONFIG_PINCTRL_SUN50I_H6=y
+CONFIG_PINCTRL_SUN50I_H616=y
+CONFIG_PINCTRL_SUN50I_H616_R=y
+CONFIG_PINCTRL_SUN50I_H6_R=y
+CONFIG_PINCTRL_SUN5I=y
+# CONFIG_PINCTRL_SUN6I_A31 is not set
+# CONFIG_PINCTRL_SUN6I_A31_R is not set
+# CONFIG_PINCTRL_SUN8I_A23 is not set
+# CONFIG_PINCTRL_SUN8I_A23_R is not set
+# CONFIG_PINCTRL_SUN8I_A33 is not set
+# CONFIG_PINCTRL_SUN8I_A83T is not set
+# CONFIG_PINCTRL_SUN8I_A83T_R is not set
+# CONFIG_PINCTRL_SUN8I_H3 is not set
+# CONFIG_PINCTRL_SUN8I_H3_R is not set
+# CONFIG_PINCTRL_SUN8I_V3S is not set
+# CONFIG_PINCTRL_SUN9I_A80 is not set
+# CONFIG_PINCTRL_SUN9I_A80_R is not set
+CONFIG_PINCTRL_ZYNQMP=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_HISI=y
+CONFIG_POWER_RESET_VEXPRESS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_QORIQ_THERMAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_HI655X=y
+CONFIG_ROCKCHIP_IODOMAIN=y
+CONFIG_ROCKCHIP_IOMMU=y
+# CONFIG_ROCKCHIP_MBOX is not set
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+# CONFIG_ROCKCHIP_SARADC is not set
+# CONFIG_ROCKCHIP_THERMAL is not set
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
+CONFIG_RTC_DRV_MV=y
+CONFIG_RTC_I2C_AND_SPI=y
+# CONFIG_SERIAL_8250_EXAR is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_SERIAL_MVEBU_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+# CONFIG_SMC91X is not set
+# CONFIG_SND_SUN4I_I2S is not set
+# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
+# CONFIG_SND_SUN50I_DMIC is not set
+# CONFIG_SND_SUN8I_CODEC is not set
+# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
+# CONFIG_SNI_NETSEC is not set
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPI_ARMADA_3700=y
+# CONFIG_SPI_FSL_QUADSPI is not set
+# CONFIG_SPI_HISI_KUNPENG is not set
+# CONFIG_SPI_HISI_SFC is not set
+# CONFIG_SPI_HISI_SFC_V3XX is not set
+# CONFIG_SPI_ROCKCHIP_SFC is not set
+# CONFIG_SPI_SUN4I is not set
+# CONFIG_SPI_SUN6I is not set
+# CONFIG_SPI_SYNQUACER is not set
+CONFIG_SPI_THUNDERX=y
+# CONFIG_SPI_XLP is not set
+CONFIG_STUB_CLK_HI3660=y
+CONFIG_STUB_CLK_HI6220=y
+CONFIG_SUN50I_A100_CCU=y
+CONFIG_SUN50I_A100_R_CCU=y
+CONFIG_SUN50I_A64_CCU=y
+CONFIG_SUN50I_H616_CCU=y
+CONFIG_SUN50I_H6_CCU=y
+CONFIG_SUN50I_H6_R_CCU=y
+CONFIG_SUN50I_IOMMU=y
+CONFIG_SUN6I_MSGBOX=y
+CONFIG_SUN6I_RTC_CCU=y
+# CONFIG_SUN8I_A83T_CCU is not set
+CONFIG_SUN8I_DE2_CCU=y
+# CONFIG_SUN8I_H3_CCU is not set
+CONFIG_SUN8I_R_CCU=y
+CONFIG_SUN8I_THERMAL=y
+CONFIG_SUNXI_CCU=y
+CONFIG_SUNXI_RSB=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_SYNC_FILE=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+# CONFIG_TCG_TIS_SYNQUACER is not set
+CONFIG_THREAD_INFO_IN_TASK=y
+# CONFIG_TURRIS_MOX_RWTM is not set
+# CONFIG_UACCE is not set
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_XILINX=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_HISTB=y
+CONFIG_USB_XHCI_MVEBU=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_VEXPRESS_CONFIG=y
+CONFIG_VIDEOMODE_HELPERS=y
+CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
+# CONFIG_VIRTIO_IOMMU is not set
+CONFIG_VMAP_STACK=y
+CONFIG_WDAT_WDT=y
+# CONFIG_XILINX_AMS is not set
+# CONFIG_XILINX_INTC is not set
+CONFIG_XLNX_EVENT_MANAGER=y
+CONFIG_ZONE_DMA32=y
+CONFIG_ZYNQMP_FIRMWARE=y
+# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
+CONFIG_ZYNQMP_PM_DOMAINS=y
+CONFIG_ZYNQMP_POWER=y
--- /dev/null
+ARCH:=aarch64
+SUBTARGET:=armv8
+BOARDNAME:=64-bit (armv8) machines
+
+define Target/Description
+ Build multi-platform images for the ARMv8 instruction set architecture
+endef
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+ ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
+ ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/system.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ traverse,ten64)
+ ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
+ ucidef_set_interface_wan "eth6"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+traverse,ten64)
+ ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "376"
+ ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "377"
+ ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "378"
+ ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "379"
+ ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "369"
+ ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "373"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+::sysinit:/etc/init.d/rcS S boot
+::shutdown:/etc/init.d/rcS K shutdown
+ttyAMA0::askfirst:/usr/libexec/login.sh
+ttyS0::askfirst:/usr/libexec/login.sh
+tty0::askfirst:/usr/libexec/login.sh
+hvc0::askfirst:/usr/libexec/login.sh
+ttymxc0::askfirst:/usr/libexec/login.sh
+ttymxc1::askfirst:/usr/libexec/login.sh
+ttymxc2::askfirst:/usr/libexec/login.sh
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+sanitize_name_arm64() {
+ sed -e '
+ y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/;
+ s/[^a-z0-9_-]\+/-/g;
+ s/^-//;
+ s/-$//;
+ ' "$@"
+}
+
+do_sysinfo_arm64() {
+ local vendor product file
+
+ for file in sys_vendor board_vendor; do
+ vendor="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
+ case "$vendor" in
+ empty | \
+ System\ manufacturer | \
+ To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
+ continue
+ ;;
+ esac
+ [ -n "$vendor" ] && break
+ done
+
+ for file in product_name board_name; do
+ product="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
+ case "$vendor:$product" in
+ ?*:empty | \
+ ?*:System\ Product\ Name | \
+ ?*:To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
+ continue
+ ;;
+ ?*:?*)
+ break
+ ;;
+ esac
+ done
+
+ [ -d "/sys/firmware/devicetree/base" ] && return
+
+ [ -n "$vendor" -a -n "$product" ] || return
+
+ mkdir -p /tmp/sysinfo
+
+ echo "$vendor $product" > /tmp/sysinfo/model
+
+ sanitize_name_arm64 /tmp/sysinfo/model > /tmp/sysinfo/board_name
+}
+
+boot_hook_add preinit_main do_sysinfo_arm64
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+RAMFS_COPY_BIN="/usr/sbin/blkid"
+
+platform_check_image() {
+ local board=$(board_name)
+ local diskdev partdev diff
+ [ "$#" -gt 1 ] && return 1
+
+ v "Board is ${board}"
+
+ export_bootdevice && export_partdevice diskdev 0 || {
+ v "platform_check_image: Unable to determine upgrade device"
+ return 1
+ }
+
+ get_partitions "/dev/$diskdev" bootdisk
+
+ v "Extract boot sector from the image"
+ get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+ get_partitions /tmp/image.bs image
+
+ #compare tables
+ diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+
+ rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
+
+ if [ -n "$diff" ]; then
+ v "Partition layout has changed. Full image will be written."
+ ask_bool 0 "Abort" && exit 1
+ return 0
+ fi
+}
+
+platform_copy_config() {
+ local partdev parttype=ext4
+
+ if export_partdevice partdev 2; then
+ mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+ cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
+ umount /mnt
+ else
+ v "ERROR: Unable to find partition to copy config data to"
+ fi
+
+ sleep 5
+}
+
+# To avoid writing over any firmware
+# files (e.g ubootefi.var or firmware/X/ aka EBBR)
+# Copy efi/openwrt and efi/boot from the new image
+# to the existing ESP
+platform_do_upgrade_efi_system_partition() {
+ local image_file=$1
+ local target_partdev=$2
+ local image_efisp_start=$3
+ local image_efisp_size=$4
+
+ v "Updating ESP on ${target_partdev}"
+ NEW_ESP_DIR="/mnt/new_esp_loop"
+ CUR_ESP_DIR="/mnt/cur_esp"
+ mkdir "${NEW_ESP_DIR}"
+ mkdir "${CUR_ESP_DIR}"
+
+ get_image_dd "$image_file" of="/tmp/new_efi_sys_part.img" \
+ skip="$image_efisp_start" count="$image_efisp_size"
+
+ mount -t vfat -o loop -o ro /tmp/new_efi_sys_part.img "${NEW_ESP_DIR}"
+ if [ ! -d "${NEW_ESP_DIR}/efi/boot" ]; then
+ v "ERROR: Image does not contain EFI boot files (/efi/boot)"
+ return 1
+ fi
+
+ mount -t vfat "/dev/$partdev" "${CUR_ESP_DIR}"
+
+ for d in $(find "${NEW_ESP_DIR}/efi/" -mindepth 1 -maxdepth 1 -type d); do
+ v "Copying ${d}"
+ newdir_bname=$(basename "${d}")
+ rm -rf "${CUR_ESP_DIR}/efi/${newdir_bname}"
+ cp -r "${d}" "${CUR_ESP_DIR}/efi"
+ done
+
+ umount "${NEW_ESP_DIR}"
+ umount "${CUR_ESP_DIR}"
+}
+
+platform_do_upgrade() {
+ local board=$(board_name)
+ local diskdev partdev diff
+
+ export_bootdevice && export_partdevice diskdev 0 || {
+ v "platform_do_upgrade: Unable to determine upgrade device"
+ return 1
+ }
+
+ sync
+
+ if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
+ get_partitions "/dev/$diskdev" bootdisk
+
+ v "Extract boot sector from the image"
+ get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
+
+ get_partitions /tmp/image.bs image
+
+ #compare tables
+ diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
+ else
+ diff=1
+ fi
+
+ # Only change the partition table if sysupgrade -p is set,
+ # otherwise doing so could interfere with embedded "single storage"
+ # (e.g SoC boot from SD card) setups, as well as other user
+ # created storage (like uvol)
+ if [ -n "$diff" ] && [ "${UPGRADE_OPT_SAVE_PARTITIONS}" = "0" ]; then
+ # Need to remove partitions before dd, otherwise the partitions
+ # that are added after will have minor numbers offset
+ partx -d - "/dev/$diskdev"
+
+ get_image_dd "$1" of="/dev/$diskdev" bs=4096 conv=fsync
+
+ # Separate removal and addtion is necessary; otherwise, partition 1
+ # will be missing if it overlaps with the old partition 2
+ partx -a - "/dev/$diskdev"
+
+ return 0
+ fi
+
+ #iterate over each partition from the image and write it to the boot disk
+ while read part start size; do
+ if export_partdevice partdev $part; then
+ v "Writing image to /dev/$partdev..."
+ if [ "$part" = "1" ]; then
+ platform_do_upgrade_efi_system_partition \
+ $1 $partdev $start $size || return 1
+ else
+ v "Normal partition, doing DD"
+ get_image_dd "$1" of="/dev/$partdev" ibs=512 obs=1M skip="$start" \
+ count="$size" conv=fsync
+ fi
+ else
+ v "Unable to find partition $part device, skipped."
+ fi
+ done < /tmp/partmap.image
+
+ local parttype=ext4
+
+ if (blkid > /dev/null) && export_partdevice partdev 1; then
+ part_magic_fat "/dev/$partdev" && parttype=vfat
+ mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
+ if export_partdevice partdev 2; then
+ THIS_PART_BLKID=$(blkid -o value -s PARTUUID "/dev/${partdev}")
+ v "Setting rootfs PARTUUID=${THIS_PART_BLKID}"
+ sed -i "s/\(PARTUUID=\)[a-f0-9-]\+/\1${THIS_PART_BLKID}/ig" \
+ /mnt/efi/openwrt/grub.cfg
+ fi
+ umount /mnt
+ fi
+ # Provide time for the storage medium to flush before system reset
+ # (despite the sync/umount it appears NVMe etc. do it in the background)
+ sleep 5
+}
--- /dev/null
+CONFIG_64BIT=y
+CONFIG_9P_FS=y
+# CONFIG_9P_FS_POSIX_ACL is not set
+# CONFIG_9P_FS_SECURITY is not set
+# CONFIG_A64FX_DIAG is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_AC=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_EINJ=y
+# CONFIG_ACPI_APEI_ERST_DEBUG is not set
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_MEMORY_FAILURE=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_ACPI_BATTERY=y
+# CONFIG_ACPI_BGRT is not set
+CONFIG_ACPI_CCA_REQUIRED=y
+CONFIG_ACPI_CONTAINER=y
+CONFIG_ACPI_CPPC_CPUFREQ=y
+# CONFIG_ACPI_DEBUG is not set
+# CONFIG_ACPI_DEBUGGER is not set
+# CONFIG_ACPI_DOCK is not set
+# CONFIG_ACPI_EC_DEBUGFS is not set
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_GENERIC_GSI=y
+CONFIG_ACPI_GTDT=y
+CONFIG_ACPI_HOTPLUG_CPU=y
+CONFIG_ACPI_I2C_OPREGION=y
+CONFIG_ACPI_IORT=y
+CONFIG_ACPI_MCFG=y
+# CONFIG_ACPI_PCI_SLOT is not set
+# CONFIG_ACPI_PFRUT is not set
+CONFIG_ACPI_PPTT=y
+CONFIG_ACPI_PRMT=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_PROCESSOR_IDLE=y
+CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
+CONFIG_ACPI_SPCR_TABLE=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_TINY_POWER_BUTTON is not set
+# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_FORCE_MAX_ORDER=11
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_STACKWALK=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_WANTS_NO_INSTR=y
+CONFIG_ARM64=y
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
+CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+CONFIG_ARM64_TAGGED_ADDR_ABI=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_SMMU_V3_PMU is not set
+CONFIG_ATA=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+CONFIG_BALLOON_COMPACTION=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_MQ_VIRTIO=y
+CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+# CONFIG_COMPAT_32BIT_TIME is not set
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ACPI=y
+CONFIG_DMA_DIRECT_REMAP=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMI=y
+CONFIG_DMIID=y
+CONFIG_DMI_SYSFS=y
+CONFIG_DTC=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EFI=y
+CONFIG_EFIVAR_FS=y
+CONFIG_EFI_ARMSTUB_DTB_LOADER=y
+# CONFIG_EFI_BOOTLOADER_CONTROL is not set
+# CONFIG_EFI_CAPSULE_LOADER is not set
+# CONFIG_EFI_COCO_SECRET is not set
+# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
+# CONFIG_EFI_DISABLE_PCI_DMA is not set
+# CONFIG_EFI_DISABLE_RUNTIME is not set
+CONFIG_EFI_EARLYCON=y
+CONFIG_EFI_ESRT=y
+CONFIG_EFI_GENERIC_STUB=y
+# CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is not set
+CONFIG_EFI_PARAMS_FROM_FDT=y
+CONFIG_EFI_RUNTIME_WRAPPERS=y
+CONFIG_EFI_STUB=y
+# CONFIG_EFI_TEST is not set
+# CONFIG_EFI_ZBOOT is not set
+CONFIG_EXT4_FS=y
+CONFIG_F2FS_FS=y
+CONFIG_FAILOVER=y
+CONFIG_FB_EFI=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_AUTOSELECT=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_FIND_FIRST_BIT=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_ACPI=y
+CONFIG_GPIO_CDEV=y
+# CONFIG_GPIO_HISI is not set
+CONFIG_GPIO_PL061=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HID=y
+CONFIG_HID_GENERIC=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_HVC_DRIVER=y
+CONFIG_HZ_PERIODIC=y
+# CONFIG_I2C_AMD_MP2 is not set
+CONFIG_I2C_HID_ACPI=y
+# CONFIG_I2C_HISI is not set
+# CONFIG_I2C_SLAVE_TESTUNIT is not set
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_ISCSI_IBFT is not set
+CONFIG_JBD2=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_BALLOON=y
+CONFIG_MIGRATION=y
+# CONFIG_MLXBF_GIGE is not set
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_MVMDIO=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_9P=y
+# CONFIG_NET_9P_DEBUG is not set
+# CONFIG_NET_9P_FD is not set
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_NET_FAILOVER=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NR_CPUS=256
+CONFIG_NVMEM=y
+CONFIG_NVME_CORE=y
+# CONFIG_NVME_MULTIPATH is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_PADATA=y
+CONFIG_PAGE_REPORTING=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PCI=y
+# CONFIG_PCIE_HISI_ERR is not set
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_ECAM=y
+CONFIG_PCI_HOST_COMMON=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_LABEL=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYS_ADDR_T_64BIT=y
+# CONFIG_PMIC_OPREGION is not set
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
+CONFIG_PNP_DEBUG_MESSAGES=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+CONFIG_RATIONAL=y
+# CONFIG_RESET_ATTACK_MITIGATION is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SATA_HOST=y
+CONFIG_SCSI=y
+CONFIG_SCSI_COMMON=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_PNP=y
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_EARLYCON=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+# CONFIG_SURFACE_PLATFORMS is not set
+CONFIG_SWIOTLB=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYSFB=y
+# CONFIG_SYSFB_SIMPLEFB is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_ACPI=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+# CONFIG_UACCE is not set
+CONFIG_UCS2_STRING=y
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_HID=y
+CONFIG_USB_HIDDEV=y
+CONFIG_USB_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_VIRTIO=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_PCI_LEGACY=y
+CONFIG_VIRTIO_PCI_LIB=y
+CONFIG_VMAP_STACK=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_XPS=y
+CONFIG_ZONE_DMA32=y
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2016-2017 Yousong Zhou <yszhou4tech@gmail.com>
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+GRUB2_VARIANT =
+GRUB_TERMINALS =
+GRUB_SERIAL_CONFIG =
+GRUB_TERMINAL_CONFIG =
+GRUB_CONSOLE_CMDLINE = earlycon
+
+ifneq ($(CONFIG_GRUB_CONSOLE),)
+ GRUB_TERMINALS += console
+endif
+
+GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
+
+ifneq ($(GRUB_SERIAL),)
+ GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=$(if $(CONFIG_GRUB_FLOWCONTROL),on,off)
+ GRUB_TERMINALS += serial
+endif
+
+ifneq ($(GRUB_TERMINALS),)
+ GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
+endif
+
+ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
+ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(IMG_PART_SIGNATURE)-02)
+GPT_ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
+GPT_ROOTPART:=$(if $(GPT_ROOTPART),$(GPT_ROOTPART),PARTUUID=$(shell echo $(IMG_PART_DISKGUID) | sed 's/00$$/02/'))
+
+GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
+GRUB_TITLE:=$(call qstrip,$(CONFIG_GRUB_TITLE))
+
+BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
+
+define Build/combined
+ $(INSTALL_DIR) $@.boot/
+ $(CP) $(KDIR)/$(KERNEL_NAME) $@.boot/efi/openwrt/
+ -$(CP) $(STAGING_DIR_ROOT)/boot/. $@.boot/boot/
+ $(if $(filter $(1),efi),
+ $(INSTALL_DIR) $@.boot/efi/boot
+ $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/openwrt/
+ $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/boot/
+ )
+ KERNELPARTTYPE=ef FAT_TYPE="32" PADDING="1" SIGNATURE="$(IMG_PART_SIGNATURE)" \
+ $(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
+ $@ \
+ $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
+ $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
+ 256
+endef
+
+define Build/grub-config
+ rm -fR $@.boot
+ $(INSTALL_DIR) $@.boot/efi/openwrt/
+ sed \
+ -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
+ -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
+ -e 's#@ROOTPART@#root=$(ROOTPART) rootwait#g' \
+ -e 's#@GPT_ROOTPART@#root=$(GPT_ROOTPART) rootwait#g' \
+ -e 's#@CMDLINE@#$(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE)#g' \
+ -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
+ -e 's#@TITLE@#$(GRUB_TITLE)#g' \
+ -e 's#@KERNEL_NAME@#$(KERNEL_NAME)#g' \
+ ./grub-$(1).cfg > $@.boot/efi/openwrt/grub.cfg
+endef
+
+define Build/grub-install
+ rm -fR $@.grub2
+ $(INSTALL_DIR) $@.grub2
+endef
+
+DEVICE_VARS += GRUB2_VARIANT
+define Device/efi-default
+ IMAGE/rootfs.img := append-rootfs | pad-to $(ROOTFS_PARTSIZE)
+ IMAGE/rootfs.img.gz := append-rootfs | pad-to $(ROOTFS_PARTSIZE) | gzip
+ IMAGE/combined.img := grub-config efi | combined efi | grub-install efi | append-metadata
+ IMAGE/combined.img.gz := grub-config efi | combined efi | grub-install efi | gzip | append-metadata
+ IMAGE/combined.vmdk := grub-config efi | combined efi | grub-install efi | qemu-image vmdk
+ ifeq ($(CONFIG_TARGET_IMAGES_GZIP),y)
+ IMAGES-y := rootfs.img.gz
+ IMAGES-y += combined.img.gz
+ else
+ IMAGES-y := rootfs.img
+ IMAGES-y += combined.img
+ endif
+ ifeq ($(CONFIG_VMDK_IMAGES),y)
+ IMAGES-y += combined.vmdk
+ endif
+ KERNEL := kernel-bin
+ KERNEL_INSTALL := 1
+ IMAGES := $$(IMAGES-y)
+ ARTIFACTS := $$(ARTIFACTS-y)
+ SUPPORTED_DEVICES :=
+ ifeq ($(CONFIG_arm),y)
+ KERNEL_NAME = zImage
+ endif
+endef
+
+define Device/generic
+ $(call Device/efi-default)
+ DEVICE_TITLE := Generic EFI Boot
+ GRUB2_VARIANT := generic
+ FILESYSTEMS := ext4 squashfs
+ DEVICE_PACKAGES += kmod-amazon-ena kmod-e1000e kmod-vmxnet3 kmod-rtc-rx8025 \
+ kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils kmod-wdt-sp805 \
+ kmod-mvneta kmod-mvpp2 kmod-fsl-dpaa1-net kmod-fsl-dpaa2-net \
+ kmod-fsl-enetc-net kmod-dwmac-imx kmod-fsl-fec kmod-thunderx-net \
+ kmod-dwmac-rockchip kmod-dwmac-sun8i kmod-phy-aquantia kmod-phy-broadcom \
+ kmod-phy-marvell kmod-phy-marvell-10g kmod-sfp kmod-atlantic
+endef
+TARGET_DEVICES += generic
+
+$(eval $(call BuildImage))
--- /dev/null
+@SERIAL_CONFIG@
+@TERMINAL_CONFIG@
+
+set default="0"
+set timeout="@TIMEOUT@"
+
+menuentry "@TITLE@" {
+ search --set=root --label kernel
+ linux /efi/openwrt/@KERNEL_NAME@ @GPT_ROOTPART@ @CMDLINE@ noinitrd
+}
+menuentry "@TITLE@ (failsafe)" {
+ search --set=root --label kernel
+ linux /efi/openwrt/@KERNEL_NAME@ failsafe=true @GPT_ROOTPART@ @CMDLINE@ noinitrd
+}
--- /dev/null
+define KernelPackage/acpi-mdio
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=ACPI MDIO support
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-mdio-devres
+ KCONFIG:=CONFIG_ACPI_MDIO
+ FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko
+ AUTOLOAD:=$(call AutoLoad,11,acpi_mdio)
+endef
+
+define KernelPackage/acpi-mdio/description
+ Kernel driver for ACPI MDIO support
+endef
+
+$(eval $(call KernelPackage,acpi-mdio))
+
+define KernelPackage/fsl-pcs-lynx
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-phylink
+ TITLE:=NXP (Freescale) Lynx PCS
+ HIDDEN:=1
+ KCONFIG:=CONFIG_PCS_LYNX
+ FILES=$(LINUX_DIR)/drivers/net/pcs/pcs-lynx.ko
+ AUTOLOAD=$(call AutoLoad,30,pcs-lynx)
+endef
+
+$(eval $(call KernelPackage,fsl-pcs-lynx))
+
+define KernelPackage/pcs-xpcs
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Synopsis DesignWare PCS driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink
+ KCONFIG:=CONFIG_PCS_XPCS
+ FILES:=$(LINUX_DIR)/drivers/net/pcs/pcs_xpcs.ko
+ AUTOLOAD:=$(call AutoLoad,20,pcs_xpcs)
+endef
+
+$(eval $(call KernelPackage,pcs-xpcs))
+
+define KernelPackage/fsl-fec
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio \
+ +kmod-ptp +kmod-net-selftests
+ TITLE:=NXP (Freescale) FEC Ethernet controller (i.MX)
+ KCONFIG:=CONFIG_FEC
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/fec.ko
+ AUTOLOAD:=$(call AutoLoad,35,fec)
+endef
+
+$(eval $(call KernelPackage,fsl-fec))
+
+define KernelPackage/fsl-xgmac-mdio
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
+ TITLE:=NXP (Freescale) MDIO bus
+ KCONFIG:=CONFIG_FSL_XGMAC_MDIO
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko
+ AUTOLOAD=$(call AutoLoad,30,xgmac_mdio)
+endef
+
+$(eval $(call KernelPackage,fsl-xgmac-mdio))
+
+define KernelPackage/fsl-mc-dpio
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP DPAA2 DPIO (Data Path IO) driver
+ HIDDEN:=1
+ KCONFIG:=CONFIG_FSL_MC_BUS=y \
+ CONFIG_FSL_MC_DPIO
+ FILES:=$(LINUX_DIR)/drivers/soc/fsl/dpio/fsl-mc-dpio.ko
+ AUTOLOAD=$(call AutoLoad,30,fsl-mc-dpio)
+endef
+
+$(eval $(call KernelPackage,fsl-mc-dpio))
+
+define KernelPackage/fsl-enetc-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=:NXP ENETC (LS1028A) Ethernet
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-fsl-pcs-lynx
+ KCONFIG:= \
+ CONFIG_FSL_ENETC \
+ CONFIG_FSL_ENETC_VF \
+ CONFIG_FSL_ENETC_QOS
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-vf.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-ierb.ko
+ AUTOLOAD=$(call AutoLoad,35,fsl-enetc)
+endef
+
+$(eval $(call KernelPackage,fsl-enetc-net))
+
+define KernelPackage/fsl-dpaa1-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=NXP DPAA1 (LS1043/LS1046) Ethernet
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-libphy +kmod-crypto-crc32
+ KCONFIG:= \
+ CONFIG_FSL_DPAA=y \
+ CONFIG_FSL_DPAA_ETH \
+ CONFIG_FSL_FMAN \
+ CONFIG_FSL_DPAA_CHECKING=n \
+ CONFIG_FSL_BMAN_TEST=n \
+ CONFIG_FSL_QMAN_TEST=n
+ MODULES:= \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa/fsl_dpa.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_fman.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_mac.ko
+ AUTOLOAD=$(call AutoLoad,35,fsl-dpa)
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa1-net))
+
+define KernelPackage/fsl-dpaa2-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=NXP DPAA2 Ethernet
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-fsl-xgmac-mdio +kmod-phylink \
+ +kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio
+ KCONFIG:= \
+ CONFIG_FSL_MC_UAPI_SUPPORT=y \
+ CONFIG_FSL_DPAA2_ETH
+ FILES:= \
+ $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko
+ AUTOLOAD=$(call AutoLoad,35,fsl-dpaa2-eth)
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa2-net))
+
+define KernelPackage/fsl-dpaa2-console
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP DPAA2 Debug console
+ DEPENDS:=@(TARGET_armsr_armv8)
+ KCONFIG:=CONFIG_DPAA2_CONSOLE
+ FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko
+ AUTOLOAD=$(call AutoLoad,40,dpaa2-console)
+endef
+
+define KernelPackage/fsl-dpaa2-console/description
+ Kernel modules for the NXP DPAA2 debug consoles
+ (Management Complex and AIOP).
+endef
+
+$(eval $(call KernelPackage,fsl-dpaa2-console))
+
+define KernelPackage/marvell-mdio
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Armada platform MDIO driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
+ KCONFIG:=CONFIG_MVMDIO
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvmdio.ko
+ AUTOLOAD=$(call AutoLoad,30,marvell-mdio)
+endef
+
+$(eval $(call KernelPackage,marvell-mdio))
+
+define KernelPackage/phy-marvell-10g
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Alaska 10G PHY driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-libphy
+ KCONFIG:=CONFIG_MARVELL_10G_PHY
+ FILES=$(LINUX_DIR)/drivers/net/phy/marvell10g.ko
+ AUTOLOAD=$(call AutoLoad,35,marvell10g)
+endef
+
+$(eval $(call KernelPackage,phy-marvell-10g))
+
+define KernelPackage/mvneta
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Armada 370/38x/XP/37xx network driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
+ KCONFIG:=CONFIG_MVNETA
+ FILES:=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvneta.ko
+ AUTOLOAD=$(call AutoLoad,30,mvneta)
+endef
+
+$(eval $(call KernelPackage,mvneta))
+
+define KernelPackage/mvpp2
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell Armada 375/7K/8K network driver
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-marvell-mdio +kmod-phylink
+ KCONFIG:=CONFIG_MVPP2 \
+ CONFIG_MVPP2_PTP=n
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvpp2/mvpp2.ko
+ AUTOLOAD=$(call AutoLoad,40,mvpp2)
+endef
+
+$(eval $(call KernelPackage,mvpp2))
+
+define KernelPackage/imx2-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP (Freescale) i.MX2+ and Layerscape watchdog driver
+ KCONFIG:=CONFIG_IMX2_WDT
+ FILES=$(LINUX_DIR)/drivers/watchdog/imx2_wdt.ko
+ AUTOLOAD=$(call AutoLoad,60,imx2_wdt)
+endef
+
+$(eval $(call KernelPackage,imx2-wdt))
+
+define KernelPackage/imx7-ulp-wdt
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=NXP (Freescale) i.MX7ULP and later watchdog
+ KCONFIG:=CONFIG_IMX7ULP_WDT
+ FILES=$(LINUX_DIR)/drivers/watchdog/imx7ulp_wdt.ko
+ AUTOLOAD=$(call AutoLoad,60,imx7ulp_wdt)
+endef
+
+$(eval $(call KernelPackage,imx7-ulp-wdt))
+
+define KernelPackage/stmmac-core
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=Synopsis Ethernet Controller core (NXP,STMMicro,others)
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-pcs-xpcs +kmod-ptp \
+ +kmod-of-mdio
+ KCONFIG:=CONFIG_STMMAC_ETH \
+ CONFIG_STMMAC_SELFTESTS=n \
+ CONFIG_STMMAC_PLATFORM \
+ CONFIG_CONFIG_DWMAC_DWC_QOS_ETH=n \
+ CONFIG_DWMAC_GENERIC
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac-platform.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.ko
+ AUTOLOAD=$(call AutoLoad,40,stmmac stmmac-platform dwmac-generic)
+endef
+
+$(eval $(call KernelPackage,stmmac-core))
+
+define KernelPackage/dwmac-imx
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=NXP i.MX8 Ethernet controller
+ DEPENDS:=+kmod-stmmac-core
+ KCONFIG:=CONFIG_DWMAC_IMX8
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.ko
+ AUTOLOAD=$(call AutoLoad,45,dwmac-imx)
+endef
+
+$(eval $(call KernelPackage,dwmac-imx))
+
+define KernelPackage/dwmac-sun8i
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=Allwinner H3/A83T/A64 (sun8i) Ethernet
+ DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
+ KCONFIG:=CONFIG_DWMAC_SUN8I
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.ko
+ AUTOLOAD=$(call AutoLoad,45,dwmac-sun8i)
+endef
+
+$(eval $(call KernelPackage,dwmac-sun8i))
+
+define KernelPackage/dwmac-rockchip
+ SUBMENU=$(NETWORK_DEVICES_MENU)
+ TITLE:=Rockchip RK3328/RK3399/RK3568 Ethernet
+ DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
+ KCONFIG:=CONFIG_DWMAC_ROCKCHIP
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.ko
+ AUTOLOAD=$(call AutoLoad,45,dwmac-rk)
+endef
+
+$(eval $(call KernelPackage,dwmac-rockchip))
+
+define KernelPackage/thunderx-net
+ SUBMENU:=$(NETWORK_DEVICES_MENU)
+ TITLE:=Marvell (Cavium) ThunderX/2 network drivers
+ DEPENDS:=@(TARGET_armsr_armv8) +kmod-phylink +kmod-of-mdio
+ KCONFIG:=CONFIG_NET_VENDOR_CAVIUM \
+ CONFIG_THUNDER_NIC_PF \
+ CONFIG_THUNDER_NIC_VF \
+ CONFIG_THUNDER_NIC_BGX \
+ CONFIG_THUNDER_NIC_RGX
+ FILES=$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicvf.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicpf.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_xcv.ko \
+ $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_bgx.ko
+ AUTOLOAD=$(call AutoLoad,40,nicpf nicvf thunder_xcv thunder_bgx)
+endef
+
+$(eval $(call KernelPackage,thunderx-net))
+
+define KernelPackage/wdt-sp805
+ SUBMENU:=$(OTHER_MENU)
+ TITLE:=ARM SP805 Watchdog
+ KCONFIG:=CONFIG_ARM_SP805_WATCHDOG
+ FILES=$(LINUX_DIR)/drivers/watchdog/sp805_wdt.ko
+ AUTOLOAD=$(call AutoLoad,50,sp805_wdt)
+endef
+
+define KernelPackage/wdt-sp805/description
+ Support for the ARM SP805 wathchdog module.
+ This is present in the NXP Layerscape family,
+ HiSilicon HI3660 among others.
+endef
+
+$(eval $(call KernelPackage,wdt-sp805))
+
--- /dev/null
+From b77c0ecdc7915e5c5c515da1aa6cfaf6f4eb8351 Mon Sep 17 00:00:00 2001
+From: Mathew McBride <matt@traverse.com.au>
+Date: Wed, 28 Sep 2022 16:39:31 +1000
+Subject: [PATCH] arm: disable code size reduction measures
+ (gc-sections,-f*-sections)
+
+This interferes with the EFI boot stub on armv7l.
+
+Signed-off-by: Mathew McBride <matt@traverse.com.au>
+---
+ arch/arm/Kconfig | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -122,7 +122,6 @@ config ARM
+ select HAVE_UID16
+ select HAVE_VIRT_CPU_ACCOUNTING_GEN
+ select IRQ_FORCED_THREADING
+- select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
+ select MODULES_USE_ELF_REL
+ select NEED_DMA_MAP_STATE
+ select OF_EARLY_FLATTREE if OF
--- /dev/null
+From f3763a0c1b07273218cbf5886bdf8df9df501111 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:10 +0200
+Subject: [PATCH 03/14] net: dpaa2-eth: don't use -ENOTSUPP error code
+
+dpaa2_eth_setup_dpni() is called from the probe path and
+dpaa2_eth_set_link_ksettings() is propagated to user space.
+
+include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3
+protocol". Conventional wisdom has it to not use it in networking
+drivers. Replace it with -EOPNOTSUPP.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +-
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -3613,7 +3613,7 @@ static int dpaa2_eth_setup_dpni(struct f
+ dev_err(dev, "DPNI version %u.%u not supported, need >= %u.%u\n",
+ priv->dpni_ver_major, priv->dpni_ver_minor,
+ DPNI_VER_MAJOR, DPNI_VER_MINOR);
+- err = -ENOTSUPP;
++ err = -EOPNOTSUPP;
+ goto close;
+ }
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+@@ -118,7 +118,7 @@ dpaa2_eth_set_link_ksettings(struct net_
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+
+ if (!dpaa2_eth_is_type_phy(priv))
+- return -ENOTSUPP;
++ return -EOPNOTSUPP;
+
+ return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
+ }
--- /dev/null
+From 022a11062261dc4703da846d3bf4d194ef6bebf5 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:11 +0200
+Subject: [PATCH 04/14] net: dpaa2: replace dpaa2_mac_is_type_fixed() with
+ dpaa2_mac_is_type_phy()
+
+dpaa2_mac_is_type_fixed() is a header with no implementation and no
+callers, which is referenced from the documentation though. It can be
+deleted.
+
+On the other hand, it would be useful to reuse the code between
+dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
+code should be called dpaa2_mac_is_type_phy(), so let's create that.
+
+The removal and the addition are merged into the same patch because,
+in fact, is_type_phy() is the logical opposite of is_type_fixed().
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../ethernet/freescale/dpaa2/mac-phy-support.rst | 9 ++++++---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 7 +------
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h | 10 ++++++++--
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h | 7 +------
+ 4 files changed, 16 insertions(+), 17 deletions(-)
+
+--- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
++++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
+@@ -181,10 +181,13 @@ when necessary using the below listed AP
+ - int dpaa2_mac_connect(struct dpaa2_mac *mac);
+ - void dpaa2_mac_disconnect(struct dpaa2_mac *mac);
+
+-A phylink integration is necessary only when the partner DPMAC is not of TYPE_FIXED.
+-One can check for this condition using the below API::
++A phylink integration is necessary only when the partner DPMAC is not of
++``TYPE_FIXED``. This means it is either of ``TYPE_PHY``, or of
++``TYPE_BACKPLANE`` (the difference being the two that in the ``TYPE_BACKPLANE``
++mode, the MC firmware does not access the PCS registers). One can check for
++this condition using the following helper::
+
+- - bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,struct fsl_mc_io *mc_io);
++ - static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac);
+
+ Before connection to a MAC, the caller must allocate and populate the
+ dpaa2_mac structure with the associated net_device, a pointer to the MC portal
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+@@ -733,12 +733,7 @@ static inline unsigned int dpaa2_eth_rx_
+
+ static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
+ {
+- if (priv->mac &&
+- (priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
+- priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
+- return true;
+-
+- return false;
++ return dpaa2_mac_is_type_phy(priv->mac);
+ }
+
+ static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
+@@ -30,8 +30,14 @@ struct dpaa2_mac {
+ struct phy *serdes_phy;
+ };
+
+-bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,
+- struct fsl_mc_io *mc_io);
++static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac)
++{
++ if (!mac)
++ return false;
++
++ return mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
++ mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE;
++}
+
+ int dpaa2_mac_open(struct dpaa2_mac *mac);
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
+@@ -230,12 +230,7 @@ static inline bool dpaa2_switch_supports
+ static inline bool
+ dpaa2_switch_port_is_type_phy(struct ethsw_port_priv *port_priv)
+ {
+- if (port_priv->mac &&
+- (port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
+- port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
+- return true;
+-
+- return false;
++ return dpaa2_mac_is_type_phy(port_priv->mac);
+ }
+
+ static inline bool dpaa2_switch_port_has_mac(struct ethsw_port_priv *port_priv)
--- /dev/null
+From 97c07369ab8bf9895e05d4b468f18e6567263154 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:12 +0200
+Subject: [PATCH 05/14] net: dpaa2-mac: absorb phylink_start() call into
+ dpaa2_mac_start()
+
+The phylink handling is intended to be hidden inside the dpaa2_mac
+object. Move the phylink_start() call into dpaa2_mac_start(), and
+phylink_stop() into dpaa2_mac_stop().
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 5 +----
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 8 ++++++++
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 5 +----
+ 3 files changed, 10 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -2082,10 +2082,8 @@ static int dpaa2_eth_open(struct net_dev
+ goto enable_err;
+ }
+
+- if (dpaa2_eth_is_type_phy(priv)) {
++ if (dpaa2_eth_is_type_phy(priv))
+ dpaa2_mac_start(priv->mac);
+- phylink_start(priv->mac->phylink);
+- }
+
+ return 0;
+
+@@ -2159,7 +2157,6 @@ static int dpaa2_eth_stop(struct net_dev
+ int retries = 10;
+
+ if (dpaa2_eth_is_type_phy(priv)) {
+- phylink_stop(priv->mac->phylink);
+ dpaa2_mac_stop(priv->mac);
+ } else {
+ netif_tx_stop_all_queues(net_dev);
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -336,12 +336,20 @@ static void dpaa2_mac_set_supported_inte
+
+ void dpaa2_mac_start(struct dpaa2_mac *mac)
+ {
++ ASSERT_RTNL();
++
+ if (mac->serdes_phy)
+ phy_power_on(mac->serdes_phy);
++
++ phylink_start(mac->phylink);
+ }
+
+ void dpaa2_mac_stop(struct dpaa2_mac *mac)
+ {
++ ASSERT_RTNL();
++
++ phylink_stop(mac->phylink);
++
+ if (mac->serdes_phy)
+ phy_power_off(mac->serdes_phy);
+ }
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -703,10 +703,8 @@ static int dpaa2_switch_port_open(struct
+
+ dpaa2_switch_enable_ctrl_if_napi(ethsw);
+
+- if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ if (dpaa2_switch_port_is_type_phy(port_priv))
+ dpaa2_mac_start(port_priv->mac);
+- phylink_start(port_priv->mac->phylink);
+- }
+
+ return 0;
+ }
+@@ -718,7 +716,6 @@ static int dpaa2_switch_port_stop(struct
+ int err;
+
+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
+- phylink_stop(port_priv->mac->phylink);
+ dpaa2_mac_stop(port_priv->mac);
+ } else {
+ netif_tx_stop_all_queues(netdev);
--- /dev/null
+From 095ef388f714d622aa503fcccf20dc4095b72762 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:13 +0200
+Subject: [PATCH 06/14] net: dpaa2-mac: remove defensive check in
+ dpaa2_mac_disconnect()
+
+dpaa2_mac_disconnect() will only be called with a NULL mac->phylink if
+dpaa2_mac_connect() failed, or was never called.
+
+The callers are these:
+
+dpaa2_eth_disconnect_mac():
+
+ if (dpaa2_eth_is_type_phy(priv))
+ dpaa2_mac_disconnect(priv->mac);
+
+dpaa2_switch_port_disconnect_mac():
+
+ if (dpaa2_switch_port_is_type_phy(port_priv))
+ dpaa2_mac_disconnect(port_priv->mac);
+
+priv->mac can be NULL, but in that case, dpaa2_eth_is_type_phy() returns
+false, and dpaa2_mac_disconnect() is never called. Similar for
+dpaa2-switch.
+
+When priv->mac is non-NULL, it means that dpaa2_mac_connect() returned
+zero (success), and therefore, priv->mac->phylink is also a valid
+pointer.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 3 ---
+ 1 file changed, 3 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -446,9 +446,6 @@ err_pcs_destroy:
+
+ void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
+ {
+- if (!mac->phylink)
+- return;
+-
+ phylink_disconnect_phy(mac->phylink);
+ phylink_destroy(mac->phylink);
+ dpaa2_pcs_destroy(mac);
--- /dev/null
+From 06efc9b8a1360cad83cae6e71558e5458cc1fbf3 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:14 +0200
+Subject: [PATCH 07/14] net: dpaa2-eth: assign priv->mac after
+ dpaa2_mac_connect() call
+
+There are 2 requirements for correct code:
+
+- Any time the driver accesses the priv->mac pointer at runtime, it
+ either holds NULL to indicate a DPNI-DPNI connection (or unconnected
+ DPNI), or a struct dpaa2_mac whose phylink instance was fully
+ initialized (created and connected to the PHY). No changes are made to
+ priv->mac while it is being used. Currently, rtnl_lock() watches over
+ the call to dpaa2_eth_connect_mac(), so it serves the purpose of
+ serializing this with all readers of priv->mac.
+
+- dpaa2_mac_connect() should run unlocked, because inside it are 2
+ phylink calls with incompatible locking requirements: phylink_create()
+ requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect()
+ requires that the rtnl_mutex is held. The only way to solve those
+ contradictory requirements is to let dpaa2_mac_connect() take
+ rtnl_lock() when it needs to.
+
+To solve both requirements, we need to identify the writer side of the
+priv->mac pointer, which can be wrapped in a mutex private to the driver
+in a future patch. The dpaa2_mac_connect() cannot be part of the writer
+side critical section, because of an AB/BA deadlock with rtnl_lock().
+
+So the strategy needs to be that where we prepare the DPMAC by calling
+dpaa2_mac_connect(), and only make priv->mac point to it once it's fully
+prepared. This ensures that the writer side critical section has the
+absolute minimum surface it can.
+
+The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code
+path. This makes sure that priv->mac is NULL when we start tearing down
+the DPMAC that we disconnected from, and concurrent code will simply not
+see it.
+
+No locking changes in this patch (concurrent code is still blocked by
+the rtnl_mutex).
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 21 +++++++++++--------
+ 1 file changed, 12 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4443,9 +4443,8 @@ static int dpaa2_eth_connect_mac(struct
+ err = dpaa2_mac_open(mac);
+ if (err)
+ goto err_free_mac;
+- priv->mac = mac;
+
+- if (dpaa2_eth_is_type_phy(priv)) {
++ if (dpaa2_mac_is_type_phy(mac)) {
+ err = dpaa2_mac_connect(mac);
+ if (err && err != -EPROBE_DEFER)
+ netdev_err(priv->net_dev, "Error connecting to the MAC endpoint: %pe",
+@@ -4454,11 +4453,12 @@ static int dpaa2_eth_connect_mac(struct
+ goto err_close_mac;
+ }
+
++ priv->mac = mac;
++
+ return 0;
+
+ err_close_mac:
+ dpaa2_mac_close(mac);
+- priv->mac = NULL;
+ err_free_mac:
+ kfree(mac);
+ return err;
+@@ -4466,15 +4466,18 @@ err_free_mac:
+
+ static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
+ {
+- if (dpaa2_eth_is_type_phy(priv))
+- dpaa2_mac_disconnect(priv->mac);
++ struct dpaa2_mac *mac = priv->mac;
++
++ priv->mac = NULL;
+
+- if (!dpaa2_eth_has_mac(priv))
++ if (!mac)
+ return;
+
+- dpaa2_mac_close(priv->mac);
+- kfree(priv->mac);
+- priv->mac = NULL;
++ if (dpaa2_mac_is_type_phy(mac))
++ dpaa2_mac_disconnect(mac);
++
++ dpaa2_mac_close(mac);
++ kfree(mac);
+ }
+
+ static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg)
--- /dev/null
+From a5e7f7e277bd4403c45c1c7922d56d0eb08dbc7c Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:15 +0200
+Subject: [PATCH 08/14] net: dpaa2-switch: assign port_priv->mac after
+ dpaa2_mac_connect() call
+
+The dpaa2-switch has the exact same locking requirements when connected
+to a DPMAC, so it needs port_priv->mac to always point either to NULL,
+or to a DPMAC with a fully initialized phylink instance.
+
+Make the same preparatory change in the dpaa2-switch driver as in the
+dpaa2-eth one.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../ethernet/freescale/dpaa2/dpaa2-switch.c | 21 +++++++++++--------
+ 1 file changed, 12 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -1450,9 +1450,8 @@ static int dpaa2_switch_port_connect_mac
+ err = dpaa2_mac_open(mac);
+ if (err)
+ goto err_free_mac;
+- port_priv->mac = mac;
+
+- if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ if (dpaa2_mac_is_type_phy(mac)) {
+ err = dpaa2_mac_connect(mac);
+ if (err) {
+ netdev_err(port_priv->netdev,
+@@ -1462,11 +1461,12 @@ static int dpaa2_switch_port_connect_mac
+ }
+ }
+
++ port_priv->mac = mac;
++
+ return 0;
+
+ err_close_mac:
+ dpaa2_mac_close(mac);
+- port_priv->mac = NULL;
+ err_free_mac:
+ kfree(mac);
+ return err;
+@@ -1474,15 +1474,18 @@ err_free_mac:
+
+ static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
+ {
+- if (dpaa2_switch_port_is_type_phy(port_priv))
+- dpaa2_mac_disconnect(port_priv->mac);
++ struct dpaa2_mac *mac = port_priv->mac;
++
++ port_priv->mac = NULL;
+
+- if (!dpaa2_switch_port_has_mac(port_priv))
++ if (!mac)
+ return;
+
+- dpaa2_mac_close(port_priv->mac);
+- kfree(port_priv->mac);
+- port_priv->mac = NULL;
++ if (dpaa2_mac_is_type_phy(mac))
++ dpaa2_mac_disconnect(mac);
++
++ dpaa2_mac_close(mac);
++ kfree(mac);
+ }
+
+ static irqreturn_t dpaa2_switch_irq0_handler_thread(int irq_num, void *arg)
--- /dev/null
+From ce44b6ed9ee65efa9b3025552c513842eabcab88 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:16 +0200
+Subject: [PATCH 09/14] net: dpaa2: publish MAC stringset to ethtool -S even if
+ MAC is missing
+
+DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC
+objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S"
+unstructured counters. Those counters are only shown for the entity
+owning the netdev (DPNI, DPSW) if it's connected to a DPMAC.
+
+The ethtool stringset code path is split into multiple callbacks, but
+currently, connecting and disconnecting the DPMAC takes the rtnl_lock().
+This blocks the entire ethtool code path from running, see
+ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() ->
+strset_prepare_data().
+
+This is going to be a problem if we are going to no longer require
+rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC
+could appear between ops->get_sset_count() and ops->get_strings().
+If it appears out of the blue, we will provide a stringset into an array
+that was dimensioned thinking the DPMAC wouldn't be there => array
+accessed out of bounds.
+
+There isn't really a good way to work around that, and I don't want to
+put too much pressure on the ethtool framework by playing locking games.
+Just make the DPMAC counters be always available. They'll be zeroes if
+the DPNI or DPSW isn't connected to a DPMAC.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 12 +++---------
+ .../ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 11 ++---------
+ 2 files changed, 5 insertions(+), 18 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+@@ -186,7 +186,6 @@ static int dpaa2_eth_set_pauseparam(stru
+ static void dpaa2_eth_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+ {
+- struct dpaa2_eth_priv *priv = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+@@ -200,22 +199,17 @@ static void dpaa2_eth_get_strings(struct
+ strscpy(p, dpaa2_ethtool_extras[i], ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+- if (dpaa2_eth_has_mac(priv))
+- dpaa2_mac_get_strings(p);
++ dpaa2_mac_get_strings(p);
+ break;
+ }
+ }
+
+ static int dpaa2_eth_get_sset_count(struct net_device *net_dev, int sset)
+ {
+- int num_ss_stats = DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS;
+- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+-
+ switch (sset) {
+ case ETH_SS_STATS: /* ethtool_get_stats(), ethtool_get_drvinfo() */
+- if (dpaa2_eth_has_mac(priv))
+- num_ss_stats += dpaa2_mac_get_sset_count();
+- return num_ss_stats;
++ return DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS +
++ dpaa2_mac_get_sset_count();
+ default:
+ return -EOPNOTSUPP;
+ }
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
+@@ -145,14 +145,9 @@ dpaa2_switch_set_link_ksettings(struct n
+ static int
+ dpaa2_switch_ethtool_get_sset_count(struct net_device *netdev, int sset)
+ {
+- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
+- int num_ss_stats = DPAA2_SWITCH_NUM_COUNTERS;
+-
+ switch (sset) {
+ case ETH_SS_STATS:
+- if (port_priv->mac)
+- num_ss_stats += dpaa2_mac_get_sset_count();
+- return num_ss_stats;
++ return DPAA2_SWITCH_NUM_COUNTERS + dpaa2_mac_get_sset_count();
+ default:
+ return -EOPNOTSUPP;
+ }
+@@ -161,7 +156,6 @@ dpaa2_switch_ethtool_get_sset_count(stru
+ static void dpaa2_switch_ethtool_get_strings(struct net_device *netdev,
+ u32 stringset, u8 *data)
+ {
+- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+@@ -172,8 +166,7 @@ static void dpaa2_switch_ethtool_get_str
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+- if (port_priv->mac)
+- dpaa2_mac_get_strings(p);
++ dpaa2_mac_get_strings(p);
+ break;
+ }
+ }
--- /dev/null
+From c838d9fd7e6ba9ddd6006bf0a296396266e9f121 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:17 +0200
+Subject: [PATCH 10/14] net: dpaa2-switch replace direct MAC access with
+ dpaa2_switch_port_has_mac()
+
+The helper function will gain a lockdep annotation in a future patch.
+Make sure to benefit from it.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
+@@ -189,7 +189,7 @@ static void dpaa2_switch_ethtool_get_sta
+ dpaa2_switch_ethtool_counters[i].name, err);
+ }
+
+- if (port_priv->mac)
++ if (dpaa2_switch_port_has_mac(port_priv))
+ dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
+ }
+
--- /dev/null
+From e0ea63162cb5f1ca7f844d6ef5fc4079448ee2d5 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:18 +0200
+Subject: [PATCH 11/14] net: dpaa2-eth: connect to MAC before requesting the
+ "endpoint changed" IRQ
+
+dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from
+dpni_irq0_handler_thread().
+
+It could happen that the DPNI gets connected to a DPMAC on the fsl-mc
+bus exactly during probe, as soon as the "endpoint change" interrupt is
+requested in dpaa2_eth_setup_irqs(). This will cause the
+dpni_irq0_handler_thread() to register a phylink instance for that DPMAC.
+
+Then, the probing function will also try to register a phylink instance
+for the same DPMAC, operation which should fail (and this will fail the
+probing of the driver).
+
+Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that
+dpni_irq0_handler_thread() never races with the DPMAC-related portion of
+the probing path.
+
+Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of
+dpaa2_eth_connect_mac() in the teardown path.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 18 +++++++++---------
+ 1 file changed, 9 insertions(+), 9 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4710,6 +4710,10 @@ static int dpaa2_eth_probe(struct fsl_mc
+ }
+ #endif
+
++ err = dpaa2_eth_connect_mac(priv);
++ if (err)
++ goto err_connect_mac;
++
+ err = dpaa2_eth_setup_irqs(dpni_dev);
+ if (err) {
+ netdev_warn(net_dev, "Failed to set link interrupt, fall back to polling\n");
+@@ -4722,10 +4726,6 @@ static int dpaa2_eth_probe(struct fsl_mc
+ priv->do_link_poll = true;
+ }
+
+- err = dpaa2_eth_connect_mac(priv);
+- if (err)
+- goto err_connect_mac;
+-
+ err = dpaa2_eth_dl_alloc(priv);
+ if (err)
+ goto err_dl_register;
+@@ -4759,13 +4759,13 @@ err_dl_port_add:
+ err_dl_trap_register:
+ dpaa2_eth_dl_free(priv);
+ err_dl_register:
+- dpaa2_eth_disconnect_mac(priv);
+-err_connect_mac:
+ if (priv->do_link_poll)
+ kthread_stop(priv->poll_thread);
+ else
+ fsl_mc_free_irqs(dpni_dev);
+ err_poll_thread:
++ dpaa2_eth_disconnect_mac(priv);
++err_connect_mac:
+ dpaa2_eth_free_rings(priv);
+ err_alloc_rings:
+ err_csum:
+@@ -4813,9 +4813,6 @@ static int dpaa2_eth_remove(struct fsl_m
+ #endif
+
+ unregister_netdev(net_dev);
+- rtnl_lock();
+- dpaa2_eth_disconnect_mac(priv);
+- rtnl_unlock();
+
+ dpaa2_eth_dl_port_del(priv);
+ dpaa2_eth_dl_traps_unregister(priv);
+@@ -4826,6 +4823,9 @@ static int dpaa2_eth_remove(struct fsl_m
+ else
+ fsl_mc_free_irqs(ls_dev);
+
++ rtnl_lock();
++ dpaa2_eth_disconnect_mac(priv);
++ rtnl_unlock();
+ dpaa2_eth_free_rings(priv);
+ free_percpu(priv->fd);
+ free_percpu(priv->sgt_cache);
--- /dev/null
+From 5e448a17dfa2e95166534df7f677a3694ef6187d Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:19 +0200
+Subject: [PATCH 12/14] net: dpaa2-eth: serialize changes to priv->mac with a
+ mutex
+
+The dpaa2 architecture permits dynamic connections between objects on
+the fsl-mc bus, specifically between a DPNI object (represented by a
+struct net_device) and a DPMAC object (represented by a struct phylink).
+
+The DPNI driver is notified when those connections are created/broken
+through the dpni_irq0_handler_thread() method. To ensure that ethtool
+operations, as well as netdev up/down operations serialize with the
+connection/disconnection of the DPNI with a DPMAC,
+dpni_irq0_handler_thread() takes the rtnl_lock() to block those other
+operations from taking place.
+
+There is code called by dpaa2_mac_connect() which wants to acquire the
+rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() ->
+sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite
+work out, even though it's fairly simple.
+
+Create a different strategy, where all code paths in the dpaa2-eth
+driver access priv->mac only while they are holding priv->mac_lock.
+The phylink instance is not created or connected to the PHY under the
+priv->mac_lock, but only assigned to priv->mac then. This will eliminate
+the reliance on the rtnl_mutex.
+
+Add lockdep annotations and put comments where holding the lock is not
+necessary, and priv->mac can be dereferenced freely.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 43 ++++++++++++--
+ .../net/ethernet/freescale/dpaa2/dpaa2-eth.h | 6 ++
+ .../ethernet/freescale/dpaa2/dpaa2-ethtool.c | 58 +++++++++++++++----
+ 3 files changed, 91 insertions(+), 16 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -2020,8 +2020,11 @@ static int dpaa2_eth_link_state_update(s
+
+ /* When we manage the MAC/PHY using phylink there is no need
+ * to manually update the netif_carrier.
++ * We can avoid locking because we are called from the "link changed"
++ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
++ * (the writer to priv->mac), so we cannot race with it.
+ */
+- if (dpaa2_eth_is_type_phy(priv))
++ if (dpaa2_mac_is_type_phy(priv->mac))
+ goto out;
+
+ /* Chech link state; speed / duplex changes are not treated yet */
+@@ -2060,6 +2063,8 @@ static int dpaa2_eth_open(struct net_dev
+ priv->dpbp_dev->obj_desc.id, priv->bpid);
+ }
+
++ mutex_lock(&priv->mac_lock);
++
+ if (!dpaa2_eth_is_type_phy(priv)) {
+ /* We'll only start the txqs when the link is actually ready;
+ * make sure we don't race against the link up notification,
+@@ -2078,6 +2083,7 @@ static int dpaa2_eth_open(struct net_dev
+
+ err = dpni_enable(priv->mc_io, 0, priv->mc_token);
+ if (err < 0) {
++ mutex_unlock(&priv->mac_lock);
+ netdev_err(net_dev, "dpni_enable() failed\n");
+ goto enable_err;
+ }
+@@ -2085,6 +2091,8 @@ static int dpaa2_eth_open(struct net_dev
+ if (dpaa2_eth_is_type_phy(priv))
+ dpaa2_mac_start(priv->mac);
+
++ mutex_unlock(&priv->mac_lock);
++
+ return 0;
+
+ enable_err:
+@@ -2156,6 +2164,8 @@ static int dpaa2_eth_stop(struct net_dev
+ int dpni_enabled = 0;
+ int retries = 10;
+
++ mutex_lock(&priv->mac_lock);
++
+ if (dpaa2_eth_is_type_phy(priv)) {
+ dpaa2_mac_stop(priv->mac);
+ } else {
+@@ -2163,6 +2173,8 @@ static int dpaa2_eth_stop(struct net_dev
+ netif_carrier_off(net_dev);
+ }
+
++ mutex_unlock(&priv->mac_lock);
++
+ /* On dpni_disable(), the MC firmware will:
+ * - stop MAC Rx and wait for all Rx frames to be enqueued to software
+ * - cut off WRIOP dequeues from egress FQs and wait until transmission
+@@ -2488,12 +2500,20 @@ static int dpaa2_eth_ts_ioctl(struct net
+ static int dpaa2_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(dev);
++ int err;
+
+ if (cmd == SIOCSHWTSTAMP)
+ return dpaa2_eth_ts_ioctl(dev, rq, cmd);
+
+- if (dpaa2_eth_is_type_phy(priv))
+- return phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv)) {
++ err = phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
++ mutex_unlock(&priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&priv->mac_lock);
+
+ return -EOPNOTSUPP;
+ }
+@@ -4453,7 +4473,9 @@ static int dpaa2_eth_connect_mac(struct
+ goto err_close_mac;
+ }
+
++ mutex_lock(&priv->mac_lock);
+ priv->mac = mac;
++ mutex_unlock(&priv->mac_lock);
+
+ return 0;
+
+@@ -4466,9 +4488,12 @@ err_free_mac:
+
+ static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
+ {
+- struct dpaa2_mac *mac = priv->mac;
++ struct dpaa2_mac *mac;
+
++ mutex_lock(&priv->mac_lock);
++ mac = priv->mac;
+ priv->mac = NULL;
++ mutex_unlock(&priv->mac_lock);
+
+ if (!mac)
+ return;
+@@ -4487,6 +4512,7 @@ static irqreturn_t dpni_irq0_handler_thr
+ struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev);
+ struct net_device *net_dev = dev_get_drvdata(dev);
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ bool had_mac;
+ int err;
+
+ err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle,
+@@ -4504,7 +4530,12 @@ static irqreturn_t dpni_irq0_handler_thr
+ dpaa2_eth_update_tx_fqids(priv);
+
+ rtnl_lock();
+- if (dpaa2_eth_has_mac(priv))
++ /* We can avoid locking because the "endpoint changed" IRQ
++ * handler is the only one who changes priv->mac at runtime,
++ * so we are not racing with anyone.
++ */
++ had_mac = !!priv->mac;
++ if (had_mac)
+ dpaa2_eth_disconnect_mac(priv);
+ else
+ dpaa2_eth_connect_mac(priv);
+@@ -4605,6 +4636,8 @@ static int dpaa2_eth_probe(struct fsl_mc
+ priv = netdev_priv(net_dev);
+ priv->net_dev = net_dev;
+
++ mutex_init(&priv->mac_lock);
++
+ priv->iommu_domain = iommu_get_domain_for_dev(dev);
+
+ priv->tx_tstamp_type = HWTSTAMP_TX_OFF;
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
+@@ -580,6 +580,8 @@ struct dpaa2_eth_priv {
+ #endif
+
+ struct dpaa2_mac *mac;
++ /* Serializes changes to priv->mac */
++ struct mutex mac_lock;
+ struct workqueue_struct *dpaa2_ptp_wq;
+ struct work_struct tx_onestep_tstamp;
+ struct sk_buff_head tx_skbs;
+@@ -733,11 +735,15 @@ static inline unsigned int dpaa2_eth_rx_
+
+ static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
+ {
++ lockdep_assert_held(&priv->mac_lock);
++
+ return dpaa2_mac_is_type_phy(priv->mac);
+ }
+
+ static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
+ {
++ lockdep_assert_held(&priv->mac_lock);
++
+ return priv->mac ? true : false;
+ }
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
+@@ -86,11 +86,16 @@ static void dpaa2_eth_get_drvinfo(struct
+ static int dpaa2_eth_nway_reset(struct net_device *net_dev)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ int err = -EOPNOTSUPP;
++
++ mutex_lock(&priv->mac_lock);
+
+ if (dpaa2_eth_is_type_phy(priv))
+- return phylink_ethtool_nway_reset(priv->mac->phylink);
++ err = phylink_ethtool_nway_reset(priv->mac->phylink);
++
++ mutex_unlock(&priv->mac_lock);
+
+- return -EOPNOTSUPP;
++ return err;
+ }
+
+ static int
+@@ -98,10 +103,18 @@ dpaa2_eth_get_link_ksettings(struct net_
+ struct ethtool_link_ksettings *link_settings)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ int err;
+
+- if (dpaa2_eth_is_type_phy(priv))
+- return phylink_ethtool_ksettings_get(priv->mac->phylink,
+- link_settings);
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv)) {
++ err = phylink_ethtool_ksettings_get(priv->mac->phylink,
++ link_settings);
++ mutex_unlock(&priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&priv->mac_lock);
+
+ link_settings->base.autoneg = AUTONEG_DISABLE;
+ if (!(priv->link_state.options & DPNI_LINK_OPT_HALF_DUPLEX))
+@@ -116,11 +129,17 @@ dpaa2_eth_set_link_ksettings(struct net_
+ const struct ethtool_link_ksettings *link_settings)
+ {
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
++ int err = -EOPNOTSUPP;
+
+- if (!dpaa2_eth_is_type_phy(priv))
+- return -EOPNOTSUPP;
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv))
++ err = phylink_ethtool_ksettings_set(priv->mac->phylink,
++ link_settings);
+
+- return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
++ mutex_unlock(&priv->mac_lock);
++
++ return err;
+ }
+
+ static void dpaa2_eth_get_pauseparam(struct net_device *net_dev,
+@@ -129,11 +148,16 @@ static void dpaa2_eth_get_pauseparam(str
+ struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
+ u64 link_options = priv->link_state.options;
+
++ mutex_lock(&priv->mac_lock);
++
+ if (dpaa2_eth_is_type_phy(priv)) {
+ phylink_ethtool_get_pauseparam(priv->mac->phylink, pause);
++ mutex_unlock(&priv->mac_lock);
+ return;
+ }
+
++ mutex_unlock(&priv->mac_lock);
++
+ pause->rx_pause = dpaa2_eth_rx_pause_enabled(link_options);
+ pause->tx_pause = dpaa2_eth_tx_pause_enabled(link_options);
+ pause->autoneg = AUTONEG_DISABLE;
+@@ -152,9 +176,17 @@ static int dpaa2_eth_set_pauseparam(stru
+ return -EOPNOTSUPP;
+ }
+
+- if (dpaa2_eth_is_type_phy(priv))
+- return phylink_ethtool_set_pauseparam(priv->mac->phylink,
+- pause);
++ mutex_lock(&priv->mac_lock);
++
++ if (dpaa2_eth_is_type_phy(priv)) {
++ err = phylink_ethtool_set_pauseparam(priv->mac->phylink,
++ pause);
++ mutex_unlock(&priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&priv->mac_lock);
++
+ if (pause->autoneg)
+ return -EOPNOTSUPP;
+
+@@ -309,8 +341,12 @@ static void dpaa2_eth_get_ethtool_stats(
+ }
+ *(data + i++) = buf_cnt;
+
++ mutex_lock(&priv->mac_lock);
++
+ if (dpaa2_eth_has_mac(priv))
+ dpaa2_mac_get_ethtool_stats(priv->mac, data + i);
++
++ mutex_unlock(&priv->mac_lock);
+ }
+
+ static int dpaa2_eth_prep_eth_rule(struct ethhdr *eth_value, struct ethhdr *eth_mask,
--- /dev/null
+From 80d12452a5f160c39d63efc1be07df36f9d07133 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:20 +0200
+Subject: [PATCH 13/14] net: dpaa2-switch: serialize changes to priv->mac with
+ a mutex
+
+The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth
+driver, so we need to duplicate the locking solution established by the
+previous change to the switch driver as well.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ .../freescale/dpaa2/dpaa2-switch-ethtool.c | 32 +++++++++++++++----
+ .../ethernet/freescale/dpaa2/dpaa2-switch.c | 31 ++++++++++++++++--
+ .../ethernet/freescale/dpaa2/dpaa2-switch.h | 2 ++
+ 3 files changed, 55 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
+@@ -60,11 +60,18 @@ dpaa2_switch_get_link_ksettings(struct n
+ {
+ struct ethsw_port_priv *port_priv = netdev_priv(netdev);
+ struct dpsw_link_state state = {0};
+- int err = 0;
++ int err;
+
+- if (dpaa2_switch_port_is_type_phy(port_priv))
+- return phylink_ethtool_ksettings_get(port_priv->mac->phylink,
+- link_ksettings);
++ mutex_lock(&port_priv->mac_lock);
++
++ if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ err = phylink_ethtool_ksettings_get(port_priv->mac->phylink,
++ link_ksettings);
++ mutex_unlock(&port_priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&port_priv->mac_lock);
+
+ err = dpsw_if_get_link_state(port_priv->ethsw_data->mc_io, 0,
+ port_priv->ethsw_data->dpsw_handle,
+@@ -99,9 +106,16 @@ dpaa2_switch_set_link_ksettings(struct n
+ bool if_running;
+ int err = 0, ret;
+
+- if (dpaa2_switch_port_is_type_phy(port_priv))
+- return phylink_ethtool_ksettings_set(port_priv->mac->phylink,
+- link_ksettings);
++ mutex_lock(&port_priv->mac_lock);
++
++ if (dpaa2_switch_port_is_type_phy(port_priv)) {
++ err = phylink_ethtool_ksettings_set(port_priv->mac->phylink,
++ link_ksettings);
++ mutex_unlock(&port_priv->mac_lock);
++ return err;
++ }
++
++ mutex_unlock(&port_priv->mac_lock);
+
+ /* Interface needs to be down to change link settings */
+ if_running = netif_running(netdev);
+@@ -189,8 +203,12 @@ static void dpaa2_switch_ethtool_get_sta
+ dpaa2_switch_ethtool_counters[i].name, err);
+ }
+
++ mutex_lock(&port_priv->mac_lock);
++
+ if (dpaa2_switch_port_has_mac(port_priv))
+ dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
++
++ mutex_unlock(&port_priv->mac_lock);
+ }
+
+ const struct ethtool_ops dpaa2_switch_port_ethtool_ops = {
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -603,8 +603,11 @@ static int dpaa2_switch_port_link_state_
+
+ /* When we manage the MAC/PHY using phylink there is no need
+ * to manually update the netif_carrier.
++ * We can avoid locking because we are called from the "link changed"
++ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
++ * (the writer to port_priv->mac), so we cannot race with it.
+ */
+- if (dpaa2_switch_port_is_type_phy(port_priv))
++ if (dpaa2_mac_is_type_phy(port_priv->mac))
+ return 0;
+
+ /* Interrupts are received even though no one issued an 'ifconfig up'
+@@ -684,6 +687,8 @@ static int dpaa2_switch_port_open(struct
+ struct ethsw_core *ethsw = port_priv->ethsw_data;
+ int err;
+
++ mutex_lock(&port_priv->mac_lock);
++
+ if (!dpaa2_switch_port_is_type_phy(port_priv)) {
+ /* Explicitly set carrier off, otherwise
+ * netif_carrier_ok() will return true and cause 'ip link show'
+@@ -697,6 +702,7 @@ static int dpaa2_switch_port_open(struct
+ port_priv->ethsw_data->dpsw_handle,
+ port_priv->idx);
+ if (err) {
++ mutex_unlock(&port_priv->mac_lock);
+ netdev_err(netdev, "dpsw_if_enable err %d\n", err);
+ return err;
+ }
+@@ -706,6 +712,8 @@ static int dpaa2_switch_port_open(struct
+ if (dpaa2_switch_port_is_type_phy(port_priv))
+ dpaa2_mac_start(port_priv->mac);
+
++ mutex_unlock(&port_priv->mac_lock);
++
+ return 0;
+ }
+
+@@ -715,6 +723,8 @@ static int dpaa2_switch_port_stop(struct
+ struct ethsw_core *ethsw = port_priv->ethsw_data;
+ int err;
+
++ mutex_lock(&port_priv->mac_lock);
++
+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
+ dpaa2_mac_stop(port_priv->mac);
+ } else {
+@@ -722,6 +732,8 @@ static int dpaa2_switch_port_stop(struct
+ netif_carrier_off(netdev);
+ }
+
++ mutex_unlock(&port_priv->mac_lock);
++
+ err = dpsw_if_disable(port_priv->ethsw_data->mc_io, 0,
+ port_priv->ethsw_data->dpsw_handle,
+ port_priv->idx);
+@@ -1461,7 +1473,9 @@ static int dpaa2_switch_port_connect_mac
+ }
+ }
+
++ mutex_lock(&port_priv->mac_lock);
+ port_priv->mac = mac;
++ mutex_unlock(&port_priv->mac_lock);
+
+ return 0;
+
+@@ -1474,9 +1488,12 @@ err_free_mac:
+
+ static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
+ {
+- struct dpaa2_mac *mac = port_priv->mac;
++ struct dpaa2_mac *mac;
+
++ mutex_lock(&port_priv->mac_lock);
++ mac = port_priv->mac;
+ port_priv->mac = NULL;
++ mutex_unlock(&port_priv->mac_lock);
+
+ if (!mac)
+ return;
+@@ -1495,6 +1512,7 @@ static irqreturn_t dpaa2_switch_irq0_han
+ struct ethsw_port_priv *port_priv;
+ u32 status = ~0;
+ int err, if_id;
++ bool had_mac;
+
+ err = dpsw_get_irq_status(ethsw->mc_io, 0, ethsw->dpsw_handle,
+ DPSW_IRQ_INDEX_IF, &status);
+@@ -1513,7 +1531,12 @@ static irqreturn_t dpaa2_switch_irq0_han
+
+ if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
+ rtnl_lock();
+- if (dpaa2_switch_port_has_mac(port_priv))
++ /* We can avoid locking because the "endpoint changed" IRQ
++ * handler is the only one who changes priv->mac at runtime,
++ * so we are not racing with anyone.
++ */
++ had_mac = !!port_priv->mac;
++ if (had_mac)
+ dpaa2_switch_port_disconnect_mac(port_priv);
+ else
+ dpaa2_switch_port_connect_mac(port_priv);
+@@ -3256,6 +3279,8 @@ static int dpaa2_switch_probe_port(struc
+ port_priv->netdev = port_netdev;
+ port_priv->ethsw_data = ethsw;
+
++ mutex_init(&port_priv->mac_lock);
++
+ port_priv->idx = port_idx;
+ port_priv->stp_state = BR_STATE_FORWARDING;
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
+@@ -161,6 +161,8 @@ struct ethsw_port_priv {
+
+ struct dpaa2_switch_filter_block *filter_block;
+ struct dpaa2_mac *mac;
++ /* Protects against changes to port_priv->mac */
++ struct mutex mac_lock;
+ };
+
+ /* Switch data */
--- /dev/null
+From 4ea2faf5bb13d9ba9f07e996d495c4cbe34a4236 Mon Sep 17 00:00:00 2001
+From: Vladimir Oltean <vladimir.oltean@nxp.com>
+Date: Tue, 29 Nov 2022 16:12:21 +0200
+Subject: [PATCH 14/14] net: dpaa2-mac: move rtnl_lock() only around
+ phylink_{,dis}connect_phy()
+
+After the introduction of a private mac_lock that serializes access to
+priv->mac (and port_priv->mac in the switch), the only remaining purpose
+of rtnl_lock() is to satisfy the locking requirements of
+phylink_fwnode_phy_connect() and phylink_disconnect_phy().
+
+But the functions these live in, dpaa2_mac_connect() and
+dpaa2_mac_disconnect(), have contradictory locking requirements.
+While phylink_fwnode_phy_connect() wants rtnl_lock() to be held,
+phylink_create() wants it to not be held.
+
+Move the rtnl_lock() from top-level (in the dpaa2-eth and dpaa2-switch
+drivers) to only surround the phylink calls that require it, in the
+dpaa2-mac library code.
+
+This is possible because dpaa2_mac_connect() and dpaa2_mac_disconnect()
+run unlocked, and there isn't any danger of an AB/BA deadlock between
+the rtnl_mutex and other private locks.
+
+Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
+Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
+Signed-off-by: Paolo Abeni <pabeni@redhat.com>
+---
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ----
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++
+ drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 4 ----
+ 3 files changed, 5 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+@@ -4529,7 +4529,6 @@ static irqreturn_t dpni_irq0_handler_thr
+ dpaa2_eth_set_mac_addr(netdev_priv(net_dev));
+ dpaa2_eth_update_tx_fqids(priv);
+
+- rtnl_lock();
+ /* We can avoid locking because the "endpoint changed" IRQ
+ * handler is the only one who changes priv->mac at runtime,
+ * so we are not racing with anyone.
+@@ -4539,7 +4538,6 @@ static irqreturn_t dpni_irq0_handler_thr
+ dpaa2_eth_disconnect_mac(priv);
+ else
+ dpaa2_eth_connect_mac(priv);
+- rtnl_unlock();
+ }
+
+ return IRQ_HANDLED;
+@@ -4856,9 +4854,7 @@ static int dpaa2_eth_remove(struct fsl_m
+ else
+ fsl_mc_free_irqs(ls_dev);
+
+- rtnl_lock();
+ dpaa2_eth_disconnect_mac(priv);
+- rtnl_unlock();
+ dpaa2_eth_free_rings(priv);
+ free_percpu(priv->fd);
+ free_percpu(priv->sgt_cache);
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+@@ -428,7 +428,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *
+ }
+ mac->phylink = phylink;
+
++ rtnl_lock();
+ err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
++ rtnl_unlock();
+ if (err) {
+ netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
+ goto err_phylink_destroy;
+@@ -446,7 +448,10 @@ err_pcs_destroy:
+
+ void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
+ {
++ rtnl_lock();
+ phylink_disconnect_phy(mac->phylink);
++ rtnl_unlock();
++
+ phylink_destroy(mac->phylink);
+ dpaa2_pcs_destroy(mac);
+ of_phy_put(mac->serdes_phy);
+--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
+@@ -1530,7 +1530,6 @@ static irqreturn_t dpaa2_switch_irq0_han
+ }
+
+ if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
+- rtnl_lock();
+ /* We can avoid locking because the "endpoint changed" IRQ
+ * handler is the only one who changes priv->mac at runtime,
+ * so we are not racing with anyone.
+@@ -1540,7 +1539,6 @@ static irqreturn_t dpaa2_switch_irq0_han
+ dpaa2_switch_port_disconnect_mac(port_priv);
+ else
+ dpaa2_switch_port_connect_mac(port_priv);
+- rtnl_unlock();
+ }
+
+ out:
+@@ -2958,9 +2956,7 @@ static void dpaa2_switch_remove_port(str
+ {
+ struct ethsw_port_priv *port_priv = ethsw->ports[port_idx];
+
+- rtnl_lock();
+ dpaa2_switch_port_disconnect_mac(port_priv);
+- rtnl_unlock();
+ free_netdev(port_priv->netdev);
+ ethsw->ports[port_idx] = NULL;
+ }
+++ /dev/null
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MMAP_RND_BITS=8
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_VIRT=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-# CONFIG_ARM_HIGHBANK_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_PSCI=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_CACHE_L2X0=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DMA_OPS=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_VDSO_32=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HAVE_SMP=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_NEON=y
-CONFIG_NR_CPUS=4
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
+++ /dev/null
-ARCH:=arm
-SUBTARGET:=32
-BOARDNAME:=32-bit ARM QEMU Virtual Machine
-CPU_TYPE:=cortex-a15
-CPU_SUBTYPE:=neon-vfpv4
-KERNELNAME:=zImage
-
-define Target/Description
- Build images for $(BOARDNAME)
-endef
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_ACPI_PCC=y
-CONFIG_ARCH_HISI=y
-CONFIG_ARCH_INTEL_SOCFPGA=y
-CONFIG_ARCH_LAYERSCAPE=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NXP=y
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_SYNQUACER=y
-CONFIG_ARCH_THUNDER=y
-CONFIG_ARCH_THUNDER2=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_ARM64_EPAN=y
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_PTR_AUTH_KERNEL=y
-CONFIG_ARM64_SME=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=48
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
-# CONFIG_ARMADA_37XX_RWTM_MBOX is not set
-CONFIG_ARMADA_37XX_WATCHDOG=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-# CONFIG_ARM_DMC620_PMU is not set
-# CONFIG_ARM_MHU_V2 is not set
-CONFIG_ARM_SBSA_WATCHDOG=y
-CONFIG_ARM_SMC_WATCHDOG=y
-CONFIG_ARM_SMMU=y
-# CONFIG_ARM_SMMU_DISABLE_BYPASS_BY_DEFAULT is not set
-# CONFIG_ARM_SMMU_LEGACY_DT_BINDINGS is not set
-CONFIG_ARM_SMMU_V3=y
-# CONFIG_ARM_SMMU_V3_PMU is not set
-# CONFIG_ARM_SMMU_V3_SVA is not set
-CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_AXI_DMAC is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BLK_PM=y
-CONFIG_CAVIUM_TX2_ERRATUM_219=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLK_INTEL_SOCFPGA=y
-CONFIG_CLK_INTEL_SOCFPGA64=y
-CONFIG_CLK_LS1028A_PLLDIG=y
-CONFIG_CLK_PX30=y
-CONFIG_CLK_QORIQ=y
-CONFIG_CLK_RK3308=y
-CONFIG_CLK_RK3328=y
-CONFIG_CLK_RK3368=y
-CONFIG_CLK_RK3399=y
-CONFIG_CLK_RK3568=y
-CONFIG_CLK_SP810=y
-CONFIG_CLK_SUNXI=y
-CONFIG_CLK_SUNXI_CLOCKS=y
-# CONFIG_CLK_SUNXI_PRCM_SUN6I is not set
-# CONFIG_CLK_SUNXI_PRCM_SUN8I is not set
-# CONFIG_CLK_SUNXI_PRCM_SUN9I is not set
-CONFIG_CLK_VEXPRESS_OSC=y
-# CONFIG_COMMON_CLK_FSL_FLEXSPI is not set
-# CONFIG_COMMON_CLK_FSL_SAI is not set
-CONFIG_COMMON_CLK_HI3516CV300=y
-CONFIG_COMMON_CLK_HI3519=y
-CONFIG_COMMON_CLK_HI3559A=y
-CONFIG_COMMON_CLK_HI3660=y
-CONFIG_COMMON_CLK_HI3670=y
-CONFIG_COMMON_CLK_HI3798CV200=y
-CONFIG_COMMON_CLK_HI6220=y
-CONFIG_COMMON_CLK_HI655X=y
-CONFIG_COMMON_CLK_ROCKCHIP=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMMON_CLK_ZYNQMP=y
-CONFIG_COMMON_RESET_HI3660=y
-CONFIG_COMMON_RESET_HI6220=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-CONFIG_CPU_PM=y
-CONFIG_CRYPTO_AES_ARM64=y
-CONFIG_CRYPTO_AES_ARM64_BS=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
-CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
-CONFIG_CRYPTO_BLAKE2S=y
-CONFIG_CRYPTO_CHACHA20=y
-CONFIG_CRYPTO_CHACHA20_NEON=y
-CONFIG_CRYPTO_CRYPTD=y
-# CONFIG_CRYPTO_DEV_ALLWINNER is not set
-# CONFIG_CRYPTO_DEV_FSL_DPAA2_CAAM is not set
-# CONFIG_CRYPTO_DEV_HISI_HPRE is not set
-# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set
-# CONFIG_CRYPTO_DEV_HISI_TRNG is not set
-# CONFIG_CRYPTO_DEV_OCTEONTX2_CPT is not set
-# CONFIG_CRYPTO_DEV_ROCKCHIP is not set
-# CONFIG_CRYPTO_DEV_ZYNQMP_AES is not set
-# CONFIG_CRYPTO_DEV_ZYNQMP_SHA3 is not set
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
-CONFIG_CRYPTO_POLYVAL_ARM64_CE=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA256_ARM64=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_SHA512_ARM64=y
-CONFIG_CRYPTO_SIMD=y
-# CONFIG_CRYPTO_SM4_ARM64_CE_BLK is not set
-# CONFIG_CRYPTO_SM4_ARM64_NEON_BLK is not set
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_SUN6I=y
-CONFIG_DRM=y
-CONFIG_DRM_BOCHS=y
-CONFIG_DRM_BRIDGE=y
-CONFIG_DRM_GEM_SHMEM_HELPER=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_PANEL=y
-CONFIG_DRM_PANEL_BRIDGE=y
-CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y
-CONFIG_DRM_QXL=y
-# CONFIG_DRM_ROCKCHIP is not set
-CONFIG_DRM_TTM=y
-CONFIG_DRM_TTM_HELPER=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_DRM_VRAM_HELPER=y
-# CONFIG_DWMAC_SUN8I is not set
-# CONFIG_DWMAC_SUNXI is not set
-CONFIG_DW_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_MODE_HELPERS=y
-# CONFIG_FB_XILINX is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FRAME_WARN=2048
-# CONFIG_FSL_DPAA is not set
-# CONFIG_FSL_DPAA2_QDMA is not set
-CONFIG_FSL_ERRATUM_A008585=y
-# CONFIG_FSL_IMX8_DDR_PMU is not set
-# CONFIG_FSL_PQ_MDIO is not set
-CONFIG_FUJITSU_ERRATUM_010001=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-# CONFIG_GIANFAR is not set
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MPC8XXX=y
-CONFIG_GPIO_ROCKCHIP=y
-CONFIG_GPIO_THUNDERX=y
-CONFIG_GPIO_XLP=y
-CONFIG_GPIO_ZYNQ=y
-CONFIG_GPIO_ZYNQMP_MODEPIN=y
-CONFIG_HDMI=y
-CONFIG_HI3660_MBOX=y
-CONFIG_HI6220_MBOX=y
-CONFIG_HISILICON_LPC=y
-CONFIG_HISI_PMU=y
-CONFIG_HISI_THERMAL=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_ARM_SMCCC_TRNG=y
-# CONFIG_HW_RANDOM_HISI is not set
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALTERA=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_HIX5HD2 is not set
-CONFIG_I2C_IMX=y
-# CONFIG_I2C_SLAVE_TESTUNIT is not set
-CONFIG_I2C_SYNQUACER=y
-CONFIG_I2C_THUNDERX=y
-# CONFIG_I2C_XLP9XX is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-# CONFIG_IMX2_WDT is not set
-# CONFIG_INPUT_HISI_POWERKEY is not set
-# CONFIG_INPUT_IBM_PANEL is not set
-# CONFIG_INTEL_STRATIX10_RSU is not set
-# CONFIG_INTEL_STRATIX10_SERVICE is not set
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_DEFAULT_DMA_LAZY is not set
-CONFIG_IOMMU_DEFAULT_DMA_STRICT=y
-CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_DART is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_K3_DMA is not set
-CONFIG_KCMP=y
-# CONFIG_KEYBOARD_SUN4I_LRADC is not set
-CONFIG_LCD_CLASS_DEVICE=m
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MARVELL_10G_PHY=y
-# CONFIG_MARVELL_CN10K_DDR_PMU is not set
-# CONFIG_MARVELL_CN10K_TAD_PMU is not set
-CONFIG_MDIO_SUN4I=y
-# CONFIG_MFD_ALTERA_A10SR is not set
-CONFIG_MFD_ALTERA_SYSMGR=y
-# CONFIG_MFD_AXP20X_RSB is not set
-CONFIG_MFD_CORE=y
-CONFIG_MFD_HI655X_PMIC=y
-# CONFIG_MFD_KHADAS_MCU is not set
-CONFIG_MFD_SUN4I_GPADC=y
-# CONFIG_MFD_SUN6I_PRCM is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_VEXPRESS_SYSREG=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_CAVIUM_THUNDERX=y
-CONFIG_MMC_DW=y
-# CONFIG_MMC_DW_BLUEFIELD is not set
-# CONFIG_MMC_DW_EXYNOS is not set
-# CONFIG_MMC_DW_HI3798CV200 is not set
-# CONFIG_MMC_DW_K3 is not set
-# CONFIG_MMC_DW_PCI is not set
-CONFIG_MMC_DW_PLTFM=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_MMC_RICOH_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_MMC_SDHCI_PCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MVNETA is not set
-# CONFIG_MVPP2 is not set
-# CONFIG_MV_XOR is not set
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NET_VENDOR_ALLWINNER is not set
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=64
-CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
-# CONFIG_NVMEM_LAYERSCAPE_SFP is not set
-CONFIG_NVMEM_ROCKCHIP_EFUSE=y
-# CONFIG_NVMEM_ROCKCHIP_OTP is not set
-# CONFIG_NVMEM_SUNXI_SID is not set
-# CONFIG_NVMEM_ZYNQMP is not set
-CONFIG_PCC=y
-CONFIG_PCIE_HISI_STB=y
-CONFIG_PCIE_LAYERSCAPE=y
-CONFIG_PCIE_MOBIVEIL_PLAT=y
-CONFIG_PCIE_ROCKCHIP=y
-# CONFIG_PCIE_ROCKCHIP_DW_HOST is not set
-CONFIG_PCIE_ROCKCHIP_HOST=y
-CONFIG_PCIE_XILINX_CPM=y
-CONFIG_PCIE_XILINX_NWL=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCI_LAYERSCAPE=y
-# CONFIG_PHY_FSL_LYNX_28G is not set
-CONFIG_PHY_HI3660_USB=y
-CONFIG_PHY_HI3670_PCIE=y
-CONFIG_PHY_HI3670_USB=y
-CONFIG_PHY_HI6220_USB=y
-CONFIG_PHY_HISI_INNO_USB2=y
-# CONFIG_PHY_HISTB_COMBPHY is not set
-CONFIG_PHY_MVEBU_A3700_COMPHY=y
-CONFIG_PHY_MVEBU_A3700_UTMI=y
-CONFIG_PHY_MVEBU_A38X_COMPHY=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-# CONFIG_PHY_ROCKCHIP_DP is not set
-# CONFIG_PHY_ROCKCHIP_DPHY_RX0 is not set
-CONFIG_PHY_ROCKCHIP_EMMC=y
-# CONFIG_PHY_ROCKCHIP_INNO_CSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY is not set
-# CONFIG_PHY_ROCKCHIP_INNO_HDMI is not set
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-# CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY is not set
-CONFIG_PHY_ROCKCHIP_PCIE=y
-CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
-CONFIG_PHY_ROCKCHIP_TYPEC=y
-# CONFIG_PHY_ROCKCHIP_USB is not set
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN50I_USB3=y
-# CONFIG_PHY_SUN6I_MIPI_DPHY is not set
-CONFIG_PHY_SUN9I_USB=y
-# CONFIG_PHY_XILINX_ZYNQMP is not set
-CONFIG_PINCTRL_ROCKCHIP=y
-# CONFIG_PINCTRL_SUN20I_D1 is not set
-CONFIG_PINCTRL_SUN4I_A10=y
-CONFIG_PINCTRL_SUN50I_A100=y
-CONFIG_PINCTRL_SUN50I_A100_R=y
-CONFIG_PINCTRL_SUN50I_A64=y
-CONFIG_PINCTRL_SUN50I_A64_R=y
-CONFIG_PINCTRL_SUN50I_H5=y
-CONFIG_PINCTRL_SUN50I_H6=y
-CONFIG_PINCTRL_SUN50I_H616=y
-CONFIG_PINCTRL_SUN50I_H616_R=y
-CONFIG_PINCTRL_SUN50I_H6_R=y
-CONFIG_PINCTRL_SUN5I=y
-# CONFIG_PINCTRL_SUN6I_A31 is not set
-# CONFIG_PINCTRL_SUN6I_A31_R is not set
-# CONFIG_PINCTRL_SUN8I_A23 is not set
-# CONFIG_PINCTRL_SUN8I_A23_R is not set
-# CONFIG_PINCTRL_SUN8I_A33 is not set
-# CONFIG_PINCTRL_SUN8I_A83T is not set
-# CONFIG_PINCTRL_SUN8I_A83T_R is not set
-# CONFIG_PINCTRL_SUN8I_H3 is not set
-# CONFIG_PINCTRL_SUN8I_H3_R is not set
-# CONFIG_PINCTRL_SUN8I_V3S is not set
-# CONFIG_PINCTRL_SUN9I_A80 is not set
-# CONFIG_PINCTRL_SUN9I_A80_R is not set
-CONFIG_PINCTRL_ZYNQMP=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_HISI=y
-CONFIG_POWER_RESET_VEXPRESS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_QORIQ_THERMAL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_HI655X=y
-CONFIG_ROCKCHIP_IODOMAIN=y
-CONFIG_ROCKCHIP_IOMMU=y
-# CONFIG_ROCKCHIP_MBOX is not set
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-# CONFIG_ROCKCHIP_SARADC is not set
-# CONFIG_ROCKCHIP_THERMAL is not set
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-# CONFIG_RTC_DRV_FSL_FTM_ALARM is not set
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-# CONFIG_SERIAL_8250_EXAR is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_FSL_LPUART=y
-CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-# CONFIG_SMC91X is not set
-# CONFIG_SND_SUN4I_I2S is not set
-# CONFIG_SND_SUN50I_CODEC_ANALOG is not set
-# CONFIG_SND_SUN50I_DMIC is not set
-# CONFIG_SND_SUN8I_CODEC is not set
-# CONFIG_SND_SUN8I_CODEC_ANALOG is not set
-# CONFIG_SNI_NETSEC is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-# CONFIG_SPI_FSL_QUADSPI is not set
-# CONFIG_SPI_HISI_KUNPENG is not set
-# CONFIG_SPI_HISI_SFC is not set
-# CONFIG_SPI_HISI_SFC_V3XX is not set
-# CONFIG_SPI_ROCKCHIP_SFC is not set
-# CONFIG_SPI_SUN4I is not set
-# CONFIG_SPI_SUN6I is not set
-# CONFIG_SPI_SYNQUACER is not set
-CONFIG_SPI_THUNDERX=y
-# CONFIG_SPI_XLP is not set
-CONFIG_STUB_CLK_HI3660=y
-CONFIG_STUB_CLK_HI6220=y
-CONFIG_SUN50I_A100_CCU=y
-CONFIG_SUN50I_A100_R_CCU=y
-CONFIG_SUN50I_A64_CCU=y
-CONFIG_SUN50I_H616_CCU=y
-CONFIG_SUN50I_H6_CCU=y
-CONFIG_SUN50I_H6_R_CCU=y
-CONFIG_SUN50I_IOMMU=y
-CONFIG_SUN6I_MSGBOX=y
-CONFIG_SUN6I_RTC_CCU=y
-# CONFIG_SUN8I_A83T_CCU is not set
-CONFIG_SUN8I_DE2_CCU=y
-# CONFIG_SUN8I_H3_CCU is not set
-CONFIG_SUN8I_R_CCU=y
-CONFIG_SUN8I_THERMAL=y
-CONFIG_SUNXI_CCU=y
-CONFIG_SUNXI_RSB=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_SYNC_FILE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-# CONFIG_TCG_TIS_SYNQUACER is not set
-CONFIG_THREAD_INFO_IN_TASK=y
-# CONFIG_TURRIS_MOX_RWTM is not set
-# CONFIG_UACCE is not set
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_XILINX=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_HISTB=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_VEXPRESS_CONFIG=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_VIRTIO_DMA_SHARED_BUFFER=y
-# CONFIG_VIRTIO_IOMMU is not set
-CONFIG_VMAP_STACK=y
-CONFIG_WDAT_WDT=y
-# CONFIG_XILINX_AMS is not set
-# CONFIG_XILINX_INTC is not set
-CONFIG_XLNX_EVENT_MANAGER=y
-CONFIG_ZONE_DMA32=y
-CONFIG_ZYNQMP_FIRMWARE=y
-# CONFIG_ZYNQMP_FIRMWARE_DEBUG is not set
-CONFIG_ZYNQMP_PM_DOMAINS=y
-CONFIG_ZYNQMP_POWER=y
+++ /dev/null
-ARCH:=aarch64
-SUBTARGET:=64
-BOARDNAME:=64-bit ARM machines
-
-define Target/Description
- Build multi-platform images for the ARMv8 instruction set architecture
-endef
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) 2017 Yousong Zhou <yszhou4tech@gmail.com>
-
-include $(TOPDIR)/rules.mk
-
-BOARD:=armvirt
-BOARDNAME:=QEMU ARM Virtual Machine
-FEATURES:=fpu pci pcie rtc usb boot-part rootfs-part
-FEATURES+=cpiogz ext4 ramdisk squashfs targz vmdk
-
-KERNEL_PATCHVER:=6.1
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += mkf2fs e2fsprogs
-# blkid used for resolving PARTUUID
-# in sysupgrade
-DEFAULT_PACKAGES += blkid
-
-$(eval $(call BuildTarget))
+++ /dev/null
-This target generates images that can be used on ARM machines with EFI
-support (e.g EDKII/TianoCore or U-Boot with bootefi).
-
-The kernel and filesystem images can also be used directly by QEMU:
-
-Run with qemu-system-arm
-
- # boot with initramfs embedded in
- qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-generic-initramfs-kernel.bin
-
- # boot with accel=kvm
- qemu-system-arm -nographic -M virt,accel=kvm -cpu host -m 64 -kernel
- openwrt-armvirt-32-generic-initramfs-kernel.bin
-
- # boot with a separate rootfs
- qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-generic-kernel.bin \
- -drive file=openwrt-armvirt-32-generic-ext4-rootfs.img,format=raw,if=virtio -append 'root=/dev/vda rootwait'
-
- # boot with local dir as rootfs
- qemu-system-arm -nographic -M virt -m 64 -kernel openwrt-armvirt-32-generic-kernel.bin \
- -fsdev local,id=rootdev,path=root-armvirt/,security_model=none \
- -device virtio-9p-pci,fsdev=rootdev,mount_tag=/dev/root \
- -append 'rootflags=trans=virtio,version=9p2000.L,cache=loose rootfstype=9p'
-
-Run with kvmtool
-
- # start a named machine
- lkvm run -k openwrt-armvirt-32-zImage -i openwrt-armvirt-32-rootfs.cpio --name armvirt0
-
- # start with virtio-9p rootfs
- lkvm run -k openwrt-armvirt-32-zImage -d root-armvirt/
-
- # stop "armvirt0"
- lkvm stop --name armvirt0
-
- # stop all
- lkvm stop --all
-
-The multi-platform ARMv8 target can be used with QEMU:
-
- qemu-system-aarch64 -machine virt -cpu cortex-a57 -nographic \
- -kernel openwrt-armvirt-64-generic-initramfs-kernel.bin \
-
-With a EDKII or U-Boot binary for the QEMU ARM virtual machines, you can use these
-images in EFI mode:
-
-32-bit:
-gunzip -c bin/targets/armvirt/32/openwrt-armvirt-32-generic-ext4-combined.img.gz > openwrt-arm-32.img
-qemu-system-arm -nographic \
- -cpu cortex-a15 -machine virt \
- -bios QEMU_EFI_32.fd \
- -smp 1 -m 1024 \
- -device virtio-rng-pci \
- -drive file=openwrt-arm-32.img,format=raw,index=0,media=disk \
- -netdev user,id=testlan -net nic,netdev=testlan \
- -netdev user,id=testwan -net nic,netdev=testwan
-
-64-bit:
-gunzip -c bin/targets/armvirt/64/openwrt-armvirt-64-generic-ext4-combined.img.gz > openwrt-arm-64.img
-qemu-system-aarch64 -nographic \
- -cpu cortex-a53 -machine virt \
- -bios QEMU_EFI_64.fd \
- -smp 1 -m 1024 \
- -device virtio-rng-pci \
- -drive file=openwrt-arm-64.img,format=raw,index=0,media=disk \
- -netdev user,id=testlan -net nic,netdev=testlan \
- -netdev user,id=testwan -net nic,netdev=testwan
-
-One can find EFI/BIOS binaries from:
-- Compile mainline U-Boot for the QEMU ARM virtual machine (qemu_arm_defconfig/qemu_arm64_defconfig)
-- From distribution packages (such as qemu-efi-arm and qemu-efi-aarch64 in Debian)
-- Community builds, like retrage/edk2-nightly: https://retrage.github.io/edk2-nightly/
+++ /dev/null
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-traverse,ten64)
- ucidef_set_led_netdev "sfp1" "SFP 1" "ten64:green:sfp1:down" "eth8" "link tx rx"
- ucidef_set_led_netdev "sfp2" "SFP 2" "ten64:green:sfp2:up" "eth9" "link tx rx"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/system.sh
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-case "$(board_name)" in
- traverse,ten64)
- ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
- ucidef_set_interface_wan "eth6"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-traverse,ten64)
- ucidef_add_gpio_switch "lte_reset" "Cell Modem Reset" "376"
- ucidef_add_gpio_switch "lte_power" "Cell Modem Power" "377"
- ucidef_add_gpio_switch "lte_disable" "Cell Modem Airplane mode" "378"
- ucidef_add_gpio_switch "gnss_disable" "Cell Modem Disable GNSS receiver" "379"
- ucidef_add_gpio_switch "lower_sfp_txidsable" "Lower SFP+ TX Disable" "369"
- ucidef_add_gpio_switch "upper_sfp_txdisable" "Upper SFP+ TX Disable" "373"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyAMA0::askfirst:/usr/libexec/login.sh
-ttyS0::askfirst:/usr/libexec/login.sh
-tty0::askfirst:/usr/libexec/login.sh
-hvc0::askfirst:/usr/libexec/login.sh
-ttymxc0::askfirst:/usr/libexec/login.sh
-ttymxc1::askfirst:/usr/libexec/login.sh
-ttymxc2::askfirst:/usr/libexec/login.sh
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-sanitize_name_arm64() {
- sed -e '
- y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/;
- s/[^a-z0-9_-]\+/-/g;
- s/^-//;
- s/-$//;
- ' "$@"
-}
-
-do_sysinfo_arm64() {
- local vendor product file
-
- for file in sys_vendor board_vendor; do
- vendor="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
- case "$vendor" in
- empty | \
- System\ manufacturer | \
- To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
- continue
- ;;
- esac
- [ -n "$vendor" ] && break
- done
-
- for file in product_name board_name; do
- product="$(cat /sys/devices/virtual/dmi/id/$file 2>/dev/null)"
- case "$vendor:$product" in
- ?*:empty | \
- ?*:System\ Product\ Name | \
- ?*:To\ [bB]e\ [fF]illed\ [bB]y\ O\.E\.M\.)
- continue
- ;;
- ?*:?*)
- break
- ;;
- esac
- done
-
- [ -d "/sys/firmware/devicetree/base" ] && return
-
- [ -n "$vendor" -a -n "$product" ] || return
-
- mkdir -p /tmp/sysinfo
-
- echo "$vendor $product" > /tmp/sysinfo/model
-
- sanitize_name_arm64 /tmp/sysinfo/model > /tmp/sysinfo/board_name
-}
-
-boot_hook_add preinit_main do_sysinfo_arm64
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-or-later
-
-RAMFS_COPY_BIN="/usr/sbin/blkid"
-
-platform_check_image() {
- local board=$(board_name)
- local diskdev partdev diff
- [ "$#" -gt 1 ] && return 1
-
- v "Board is ${board}"
-
- export_bootdevice && export_partdevice diskdev 0 || {
- v "platform_check_image: Unable to determine upgrade device"
- return 1
- }
-
- get_partitions "/dev/$diskdev" bootdisk
-
- v "Extract boot sector from the image"
- get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
-
- get_partitions /tmp/image.bs image
-
- #compare tables
- diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
-
- rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image
-
- if [ -n "$diff" ]; then
- v "Partition layout has changed. Full image will be written."
- ask_bool 0 "Abort" && exit 1
- return 0
- fi
-}
-
-platform_copy_config() {
- local partdev parttype=ext4
-
- if export_partdevice partdev 2; then
- mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
- cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
- umount /mnt
- else
- v "ERROR: Unable to find partition to copy config data to"
- fi
-
- sleep 5
-}
-
-# To avoid writing over any firmware
-# files (e.g ubootefi.var or firmware/X/ aka EBBR)
-# Copy efi/openwrt and efi/boot from the new image
-# to the existing ESP
-platform_do_upgrade_efi_system_partition() {
- local image_file=$1
- local target_partdev=$2
- local image_efisp_start=$3
- local image_efisp_size=$4
-
- v "Updating ESP on ${target_partdev}"
- NEW_ESP_DIR="/mnt/new_esp_loop"
- CUR_ESP_DIR="/mnt/cur_esp"
- mkdir "${NEW_ESP_DIR}"
- mkdir "${CUR_ESP_DIR}"
-
- get_image_dd "$image_file" of="/tmp/new_efi_sys_part.img" \
- skip="$image_efisp_start" count="$image_efisp_size"
-
- mount -t vfat -o loop -o ro /tmp/new_efi_sys_part.img "${NEW_ESP_DIR}"
- if [ ! -d "${NEW_ESP_DIR}/efi/boot" ]; then
- v "ERROR: Image does not contain EFI boot files (/efi/boot)"
- return 1
- fi
-
- mount -t vfat "/dev/$partdev" "${CUR_ESP_DIR}"
-
- for d in $(find "${NEW_ESP_DIR}/efi/" -mindepth 1 -maxdepth 1 -type d); do
- v "Copying ${d}"
- newdir_bname=$(basename "${d}")
- rm -rf "${CUR_ESP_DIR}/efi/${newdir_bname}"
- cp -r "${d}" "${CUR_ESP_DIR}/efi"
- done
-
- umount "${NEW_ESP_DIR}"
- umount "${CUR_ESP_DIR}"
-}
-
-platform_do_upgrade() {
- local board=$(board_name)
- local diskdev partdev diff
-
- export_bootdevice && export_partdevice diskdev 0 || {
- v "platform_do_upgrade: Unable to determine upgrade device"
- return 1
- }
-
- sync
-
- if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then
- get_partitions "/dev/$diskdev" bootdisk
-
- v "Extract boot sector from the image"
- get_image_dd "$1" of=/tmp/image.bs count=63 bs=512b
-
- get_partitions /tmp/image.bs image
-
- #compare tables
- diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)"
- else
- diff=1
- fi
-
- # Only change the partition table if sysupgrade -p is set,
- # otherwise doing so could interfere with embedded "single storage"
- # (e.g SoC boot from SD card) setups, as well as other user
- # created storage (like uvol)
- if [ -n "$diff" ] && [ "${UPGRADE_OPT_SAVE_PARTITIONS}" = "0" ]; then
- # Need to remove partitions before dd, otherwise the partitions
- # that are added after will have minor numbers offset
- partx -d - "/dev/$diskdev"
-
- get_image_dd "$1" of="/dev/$diskdev" bs=4096 conv=fsync
-
- # Separate removal and addtion is necessary; otherwise, partition 1
- # will be missing if it overlaps with the old partition 2
- partx -a - "/dev/$diskdev"
-
- return 0
- fi
-
- #iterate over each partition from the image and write it to the boot disk
- while read part start size; do
- if export_partdevice partdev $part; then
- v "Writing image to /dev/$partdev..."
- if [ "$part" = "1" ]; then
- platform_do_upgrade_efi_system_partition \
- $1 $partdev $start $size || return 1
- else
- v "Normal partition, doing DD"
- get_image_dd "$1" of="/dev/$partdev" ibs=512 obs=1M skip="$start" \
- count="$size" conv=fsync
- fi
- else
- v "Unable to find partition $part device, skipped."
- fi
- done < /tmp/partmap.image
-
- local parttype=ext4
-
- if (blkid > /dev/null) && export_partdevice partdev 1; then
- part_magic_fat "/dev/$partdev" && parttype=vfat
- mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt
- if export_partdevice partdev 2; then
- THIS_PART_BLKID=$(blkid -o value -s PARTUUID "/dev/${partdev}")
- v "Setting rootfs PARTUUID=${THIS_PART_BLKID}"
- sed -i "s/\(PARTUUID=\)[a-f0-9-]\+/\1${THIS_PART_BLKID}/ig" \
- /mnt/efi/openwrt/grub.cfg
- fi
- umount /mnt
- fi
- # Provide time for the storage medium to flush before system reset
- # (despite the sync/umount it appears NVMe etc. do it in the background)
- sleep 5
-}
+++ /dev/null
-CONFIG_64BIT=y
-CONFIG_9P_FS=y
-# CONFIG_9P_FS_POSIX_ACL is not set
-# CONFIG_9P_FS_SECURITY is not set
-# CONFIG_A64FX_DIAG is not set
-CONFIG_ACPI=y
-CONFIG_ACPI_AC=y
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_EINJ=y
-# CONFIG_ACPI_APEI_ERST_DEBUG is not set
-CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_MEMORY_FAILURE=y
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_ACPI_BATTERY=y
-# CONFIG_ACPI_BGRT is not set
-CONFIG_ACPI_CCA_REQUIRED=y
-CONFIG_ACPI_CONTAINER=y
-CONFIG_ACPI_CPPC_CPUFREQ=y
-# CONFIG_ACPI_DEBUG is not set
-# CONFIG_ACPI_DEBUGGER is not set
-# CONFIG_ACPI_DOCK is not set
-# CONFIG_ACPI_EC_DEBUGFS is not set
-CONFIG_ACPI_FAN=y
-CONFIG_ACPI_GENERIC_GSI=y
-CONFIG_ACPI_GTDT=y
-CONFIG_ACPI_HOTPLUG_CPU=y
-CONFIG_ACPI_I2C_OPREGION=y
-CONFIG_ACPI_IORT=y
-CONFIG_ACPI_MCFG=y
-# CONFIG_ACPI_PCI_SLOT is not set
-# CONFIG_ACPI_PFRUT is not set
-CONFIG_ACPI_PPTT=y
-CONFIG_ACPI_PRMT=y
-CONFIG_ACPI_PROCESSOR=y
-CONFIG_ACPI_PROCESSOR_IDLE=y
-CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y
-CONFIG_ACPI_SPCR_TABLE=y
-CONFIG_ACPI_THERMAL=y
-# CONFIG_ACPI_TINY_POWER_BUTTON is not set
-# CONFIG_ALIBABA_UNCORE_DRW_PMU is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_FORCE_MAX_ORDER=11
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_STACKWALK=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANTS_NO_INSTR=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_ACPI_PARKING_PROTOCOL is not set
-CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SMMU_V3_PMU is not set
-CONFIG_ATA=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BALLOON_COMPACTION=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NVME=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_MQ_VIRTIO=y
-CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-# CONFIG_COMPAT_32BIT_TIME is not set
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ACPI=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMI=y
-CONFIG_DMIID=y
-CONFIG_DMI_SYSFS=y
-CONFIG_DTC=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EFI=y
-CONFIG_EFIVAR_FS=y
-CONFIG_EFI_ARMSTUB_DTB_LOADER=y
-# CONFIG_EFI_BOOTLOADER_CONTROL is not set
-# CONFIG_EFI_CAPSULE_LOADER is not set
-# CONFIG_EFI_COCO_SECRET is not set
-# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
-# CONFIG_EFI_DISABLE_PCI_DMA is not set
-# CONFIG_EFI_DISABLE_RUNTIME is not set
-CONFIG_EFI_EARLYCON=y
-CONFIG_EFI_ESRT=y
-CONFIG_EFI_GENERIC_STUB=y
-# CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER is not set
-CONFIG_EFI_PARAMS_FROM_FDT=y
-CONFIG_EFI_RUNTIME_WRAPPERS=y
-CONFIG_EFI_STUB=y
-# CONFIG_EFI_TEST is not set
-# CONFIG_EFI_ZBOOT is not set
-CONFIG_EXT4_FS=y
-CONFIG_F2FS_FS=y
-CONFIG_FAILOVER=y
-CONFIG_FB_EFI=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_AUTOSELECT=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_FIND_FIRST_BIT=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_ACPI=y
-CONFIG_GPIO_CDEV=y
-# CONFIG_GPIO_HISI is not set
-CONFIG_GPIO_PL061=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HID=y
-CONFIG_HID_GENERIC=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_HVC_DRIVER=y
-CONFIG_HZ_PERIODIC=y
-# CONFIG_I2C_AMD_MP2 is not set
-CONFIG_I2C_HID_ACPI=y
-# CONFIG_I2C_HISI is not set
-# CONFIG_I2C_SLAVE_TESTUNIT is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISCSI_IBFT is not set
-CONFIG_JBD2=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_BALLOON=y
-CONFIG_MIGRATION=y
-# CONFIG_MLXBF_GIGE is not set
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVMDIO=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_9P=y
-# CONFIG_NET_9P_DEBUG is not set
-# CONFIG_NET_9P_FD is not set
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_NET_FAILOVER=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NR_CPUS=256
-CONFIG_NVMEM=y
-CONFIG_NVME_CORE=y
-# CONFIG_NVME_MULTIPATH is not set
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_PADATA=y
-CONFIG_PAGE_REPORTING=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-# CONFIG_PCIE_HISI_ERR is not set
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_ECAM=y
-CONFIG_PCI_HOST_COMMON=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_LABEL=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-# CONFIG_PMIC_OPREGION is not set
-CONFIG_PNP=y
-CONFIG_PNPACPI=y
-CONFIG_PNP_DEBUG_MESSAGES=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PTP_1588_CLOCK_OPTIONAL=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RATIONAL=y
-# CONFIG_RESET_ATTACK_MITIGATION is not set
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_HOST=y
-CONFIG_SCSI=y
-CONFIG_SCSI_COMMON=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_PNP=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_EARLYCON=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SOCK_RX_QUEUE_MAPPING=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_SURFACE_PLATFORMS is not set
-CONFIG_SWIOTLB=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYSFB=y
-# CONFIG_SYSFB_SIMPLEFB is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_ACPI=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-# CONFIG_UACCE is not set
-CONFIG_UCS2_STRING=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_HID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_PCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_PCI_LEGACY=y
-CONFIG_VIRTIO_PCI_LIB=y
-CONFIG_VMAP_STACK=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_XPS=y
-CONFIG_ZONE_DMA32=y
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# Copyright (C) 2016-2017 Yousong Zhou <yszhou4tech@gmail.com>
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-GRUB2_VARIANT =
-GRUB_TERMINALS =
-GRUB_SERIAL_CONFIG =
-GRUB_TERMINAL_CONFIG =
-GRUB_CONSOLE_CMDLINE = earlycon
-
-ifneq ($(CONFIG_GRUB_CONSOLE),)
- GRUB_TERMINALS += console
-endif
-
-GRUB_SERIAL:=$(call qstrip,$(CONFIG_GRUB_SERIAL))
-
-ifneq ($(GRUB_SERIAL),)
- GRUB_SERIAL_CONFIG := serial --unit=0 --speed=$(CONFIG_GRUB_BAUDRATE) --word=8 --parity=no --stop=1 --rtscts=$(if $(CONFIG_GRUB_FLOWCONTROL),on,off)
- GRUB_TERMINALS += serial
-endif
-
-ifneq ($(GRUB_TERMINALS),)
- GRUB_TERMINAL_CONFIG := terminal_input $(GRUB_TERMINALS); terminal_output $(GRUB_TERMINALS)
-endif
-
-ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
-ROOTPART:=$(if $(ROOTPART),$(ROOTPART),PARTUUID=$(IMG_PART_SIGNATURE)-02)
-GPT_ROOTPART:=$(call qstrip,$(CONFIG_TARGET_ROOTFS_PARTNAME))
-GPT_ROOTPART:=$(if $(GPT_ROOTPART),$(GPT_ROOTPART),PARTUUID=$(shell echo $(IMG_PART_DISKGUID) | sed 's/00$$/02/'))
-
-GRUB_TIMEOUT:=$(call qstrip,$(CONFIG_GRUB_TIMEOUT))
-GRUB_TITLE:=$(call qstrip,$(CONFIG_GRUB_TITLE))
-
-BOOTOPTS:=$(call qstrip,$(CONFIG_GRUB_BOOTOPTS))
-
-define Build/combined
- $(INSTALL_DIR) $@.boot/
- $(CP) $(KDIR)/$(KERNEL_NAME) $@.boot/efi/openwrt/
- -$(CP) $(STAGING_DIR_ROOT)/boot/. $@.boot/boot/
- $(if $(filter $(1),efi),
- $(INSTALL_DIR) $@.boot/efi/boot
- $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/openwrt/
- $(CP) $(STAGING_DIR_IMAGE)/grub2/boot$(if $(CONFIG_aarch64),aa64,arm).efi $@.boot/efi/boot/
- )
- KERNELPARTTYPE=ef FAT_TYPE="32" PADDING="1" SIGNATURE="$(IMG_PART_SIGNATURE)" \
- $(if $(filter $(1),efi),GUID="$(IMG_PART_DISKGUID)") $(SCRIPT_DIR)/gen_image_generic.sh \
- $@ \
- $(CONFIG_TARGET_KERNEL_PARTSIZE) $@.boot \
- $(CONFIG_TARGET_ROOTFS_PARTSIZE) $(IMAGE_ROOTFS) \
- 256
-endef
-
-define Build/grub-config
- rm -fR $@.boot
- $(INSTALL_DIR) $@.boot/efi/openwrt/
- sed \
- -e 's#@SERIAL_CONFIG@#$(strip $(GRUB_SERIAL_CONFIG))#g' \
- -e 's#@TERMINAL_CONFIG@#$(strip $(GRUB_TERMINAL_CONFIG))#g' \
- -e 's#@ROOTPART@#root=$(ROOTPART) rootwait#g' \
- -e 's#@GPT_ROOTPART@#root=$(GPT_ROOTPART) rootwait#g' \
- -e 's#@CMDLINE@#$(BOOTOPTS) $(GRUB_CONSOLE_CMDLINE)#g' \
- -e 's#@TIMEOUT@#$(GRUB_TIMEOUT)#g' \
- -e 's#@TITLE@#$(GRUB_TITLE)#g' \
- -e 's#@KERNEL_NAME@#$(KERNEL_NAME)#g' \
- ./grub-$(1).cfg > $@.boot/efi/openwrt/grub.cfg
-endef
-
-define Build/grub-install
- rm -fR $@.grub2
- $(INSTALL_DIR) $@.grub2
-endef
-
-DEVICE_VARS += GRUB2_VARIANT
-define Device/efi-default
- IMAGE/rootfs.img := append-rootfs | pad-to $(ROOTFS_PARTSIZE)
- IMAGE/rootfs.img.gz := append-rootfs | pad-to $(ROOTFS_PARTSIZE) | gzip
- IMAGE/combined.img := grub-config efi | combined efi | grub-install efi | append-metadata
- IMAGE/combined.img.gz := grub-config efi | combined efi | grub-install efi | gzip | append-metadata
- IMAGE/combined.vmdk := grub-config efi | combined efi | grub-install efi | qemu-image vmdk
- ifeq ($(CONFIG_TARGET_IMAGES_GZIP),y)
- IMAGES-y := rootfs.img.gz
- IMAGES-y += combined.img.gz
- else
- IMAGES-y := rootfs.img
- IMAGES-y += combined.img
- endif
- ifeq ($(CONFIG_VMDK_IMAGES),y)
- IMAGES-y += combined.vmdk
- endif
- KERNEL := kernel-bin
- KERNEL_INSTALL := 1
- IMAGES := $$(IMAGES-y)
- ARTIFACTS := $$(ARTIFACTS-y)
- SUPPORTED_DEVICES :=
- ifeq ($(CONFIG_arm),y)
- KERNEL_NAME = zImage
- endif
-endef
-
-define Device/generic
- $(call Device/efi-default)
- DEVICE_TITLE := Generic EFI Boot
- GRUB2_VARIANT := generic
- FILESYSTEMS := ext4 squashfs
- DEVICE_PACKAGES += kmod-amazon-ena kmod-e1000e kmod-vmxnet3 kmod-rtc-rx8025 \
- kmod-i2c-mux-pca954x kmod-gpio-pca953x partx-utils kmod-wdt-sp805 \
- kmod-mvneta kmod-mvpp2 kmod-fsl-dpaa1-net kmod-fsl-dpaa2-net \
- kmod-fsl-enetc-net kmod-dwmac-imx kmod-fsl-fec kmod-thunderx-net \
- kmod-dwmac-rockchip kmod-dwmac-sun8i kmod-phy-aquantia kmod-phy-broadcom \
- kmod-phy-marvell kmod-phy-marvell-10g kmod-sfp kmod-atlantic
-endef
-TARGET_DEVICES += generic
-
-$(eval $(call BuildImage))
+++ /dev/null
-@SERIAL_CONFIG@
-@TERMINAL_CONFIG@
-
-set default="0"
-set timeout="@TIMEOUT@"
-
-menuentry "@TITLE@" {
- search --set=root --label kernel
- linux /efi/openwrt/@KERNEL_NAME@ @GPT_ROOTPART@ @CMDLINE@ noinitrd
-}
-menuentry "@TITLE@ (failsafe)" {
- search --set=root --label kernel
- linux /efi/openwrt/@KERNEL_NAME@ failsafe=true @GPT_ROOTPART@ @CMDLINE@ noinitrd
-}
+++ /dev/null
-define KernelPackage/acpi-mdio
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=ACPI MDIO support
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-mdio-devres
- KCONFIG:=CONFIG_ACPI_MDIO
- FILES:=$(LINUX_DIR)/drivers/net/mdio/acpi_mdio.ko
- AUTOLOAD:=$(call AutoLoad,11,acpi_mdio)
-endef
-
-define KernelPackage/acpi-mdio/description
- Kernel driver for ACPI MDIO support
-endef
-
-$(eval $(call KernelPackage,acpi-mdio))
-
-define KernelPackage/fsl-pcs-lynx
- SUBMENU=$(NETWORK_DEVICES_MENU)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-phylink
- TITLE:=NXP (Freescale) Lynx PCS
- HIDDEN:=1
- KCONFIG:=CONFIG_PCS_LYNX
- FILES=$(LINUX_DIR)/drivers/net/pcs/pcs-lynx.ko
- AUTOLOAD=$(call AutoLoad,30,pcs-lynx)
-endef
-
-$(eval $(call KernelPackage,fsl-pcs-lynx))
-
-define KernelPackage/pcs-xpcs
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Synopsis DesignWare PCS driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-phylink
- KCONFIG:=CONFIG_PCS_XPCS
- FILES:=$(LINUX_DIR)/drivers/net/pcs/pcs_xpcs.ko
- AUTOLOAD:=$(call AutoLoad,20,pcs_xpcs)
-endef
-
-$(eval $(call KernelPackage,pcs-xpcs))
-
-define KernelPackage/fsl-fec
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio \
- +kmod-ptp +kmod-net-selftests
- TITLE:=NXP (Freescale) FEC Ethernet controller (i.MX)
- KCONFIG:=CONFIG_FEC
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/freescale/fec.ko
- AUTOLOAD:=$(call AutoLoad,35,fec)
-endef
-
-$(eval $(call KernelPackage,fsl-fec))
-
-define KernelPackage/fsl-xgmac-mdio
- SUBMENU=$(NETWORK_DEVICES_MENU)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
- TITLE:=NXP (Freescale) MDIO bus
- KCONFIG:=CONFIG_FSL_XGMAC_MDIO
- FILES=$(LINUX_DIR)/drivers/net/ethernet/freescale/xgmac_mdio.ko
- AUTOLOAD=$(call AutoLoad,30,xgmac_mdio)
-endef
-
-$(eval $(call KernelPackage,fsl-xgmac-mdio))
-
-define KernelPackage/fsl-mc-dpio
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP DPAA2 DPIO (Data Path IO) driver
- HIDDEN:=1
- KCONFIG:=CONFIG_FSL_MC_BUS=y \
- CONFIG_FSL_MC_DPIO
- FILES:=$(LINUX_DIR)/drivers/soc/fsl/dpio/fsl-mc-dpio.ko
- AUTOLOAD=$(call AutoLoad,30,fsl-mc-dpio)
-endef
-
-$(eval $(call KernelPackage,fsl-mc-dpio))
-
-define KernelPackage/fsl-enetc-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=:NXP ENETC (LS1028A) Ethernet
- DEPENDS:=@(TARGET_armvirt_64) +kmod-phylink +kmod-fsl-pcs-lynx
- KCONFIG:= \
- CONFIG_FSL_ENETC \
- CONFIG_FSL_ENETC_VF \
- CONFIG_FSL_ENETC_QOS
- FILES:= \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-vf.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-mdio.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/enetc/fsl-enetc-ierb.ko
- AUTOLOAD=$(call AutoLoad,35,fsl-enetc)
-endef
-
-$(eval $(call KernelPackage,fsl-enetc-net))
-
-define KernelPackage/fsl-dpaa1-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=NXP DPAA1 (LS1043/LS1046) Ethernet
- DEPENDS:=@(TARGET_armvirt_64) +kmod-fsl-xgmac-mdio +kmod-libphy +kmod-crypto-crc32
- KCONFIG:= \
- CONFIG_FSL_DPAA=y \
- CONFIG_FSL_DPAA_ETH \
- CONFIG_FSL_FMAN \
- CONFIG_FSL_DPAA_CHECKING=n \
- CONFIG_FSL_BMAN_TEST=n \
- CONFIG_FSL_QMAN_TEST=n
- MODULES:= \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa/fsl_dpa.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_fman.ko \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/fman/fsl_dpaa_mac.ko
- AUTOLOAD=$(call AutoLoad,35,fsl-dpa)
-endef
-
-$(eval $(call KernelPackage,fsl-dpaa1-net))
-
-define KernelPackage/fsl-dpaa2-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=NXP DPAA2 Ethernet
- DEPENDS:=@(TARGET_armvirt_64) +kmod-fsl-xgmac-mdio +kmod-phylink \
- +kmod-fsl-pcs-lynx +kmod-fsl-mc-dpio
- KCONFIG:= \
- CONFIG_FSL_MC_UAPI_SUPPORT=y \
- CONFIG_FSL_DPAA2_ETH
- FILES:= \
- $(LINUX_DIR)/drivers/net/ethernet/freescale/dpaa2/fsl-dpaa2-eth.ko
- AUTOLOAD=$(call AutoLoad,35,fsl-dpaa2-eth)
-endef
-
-$(eval $(call KernelPackage,fsl-dpaa2-net))
-
-define KernelPackage/fsl-dpaa2-console
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP DPAA2 Debug console
- DEPENDS:=@(TARGET_armvirt_64)
- KCONFIG:=CONFIG_DPAA2_CONSOLE
- FILES=$(LINUX_DIR)/drivers/soc/fsl/dpaa2-console.ko
- AUTOLOAD=$(call AutoLoad,40,dpaa2-console)
-endef
-
-define KernelPackage/fsl-dpaa2-console/description
- Kernel modules for the NXP DPAA2 debug consoles
- (Management Complex and AIOP).
-endef
-
-$(eval $(call KernelPackage,fsl-dpaa2-console))
-
-define KernelPackage/marvell-mdio
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Armada platform MDIO driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy +kmod-of-mdio +kmod-acpi-mdio
- KCONFIG:=CONFIG_MVMDIO
- FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvmdio.ko
- AUTOLOAD=$(call AutoLoad,30,marvell-mdio)
-endef
-
-$(eval $(call KernelPackage,marvell-mdio))
-
-define KernelPackage/phy-marvell-10g
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Alaska 10G PHY driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-libphy
- KCONFIG:=CONFIG_MARVELL_10G_PHY
- FILES=$(LINUX_DIR)/drivers/net/phy/marvell10g.ko
- AUTOLOAD=$(call AutoLoad,35,marvell10g)
-endef
-
-$(eval $(call KernelPackage,phy-marvell-10g))
-
-define KernelPackage/mvneta
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Armada 370/38x/XP/37xx network driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-marvell-mdio +kmod-phylink
- KCONFIG:=CONFIG_MVNETA
- FILES:=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvneta.ko
- AUTOLOAD=$(call AutoLoad,30,mvneta)
-endef
-
-$(eval $(call KernelPackage,mvneta))
-
-define KernelPackage/mvpp2
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell Armada 375/7K/8K network driver
- DEPENDS:=@(TARGET_armvirt_64) +kmod-marvell-mdio +kmod-phylink
- KCONFIG:=CONFIG_MVPP2 \
- CONFIG_MVPP2_PTP=n
- FILES=$(LINUX_DIR)/drivers/net/ethernet/marvell/mvpp2/mvpp2.ko
- AUTOLOAD=$(call AutoLoad,40,mvpp2)
-endef
-
-$(eval $(call KernelPackage,mvpp2))
-
-define KernelPackage/imx2-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP (Freescale) i.MX2+ and Layerscape watchdog driver
- KCONFIG:=CONFIG_IMX2_WDT
- FILES=$(LINUX_DIR)/drivers/watchdog/imx2_wdt.ko
- AUTOLOAD=$(call AutoLoad,60,imx2_wdt)
-endef
-
-$(eval $(call KernelPackage,imx2-wdt))
-
-define KernelPackage/imx7-ulp-wdt
- SUBMENU:=$(OTHER_MENU)
- TITLE:=NXP (Freescale) i.MX7ULP and later watchdog
- KCONFIG:=CONFIG_IMX7ULP_WDT
- FILES=$(LINUX_DIR)/drivers/watchdog/imx7ulp_wdt.ko
- AUTOLOAD=$(call AutoLoad,60,imx7ulp_wdt)
-endef
-
-$(eval $(call KernelPackage,imx7-ulp-wdt))
-
-define KernelPackage/stmmac-core
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=Synopsis Ethernet Controller core (NXP,STMMicro,others)
- DEPENDS:=@(TARGET_armvirt_64) +kmod-pcs-xpcs +kmod-ptp \
- +kmod-of-mdio
- KCONFIG:=CONFIG_STMMAC_ETH \
- CONFIG_STMMAC_SELFTESTS=n \
- CONFIG_STMMAC_PLATFORM \
- CONFIG_CONFIG_DWMAC_DWC_QOS_ETH=n \
- CONFIG_DWMAC_GENERIC
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac.ko \
- $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/stmmac-platform.ko \
- $(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-generic.ko
- AUTOLOAD=$(call AutoLoad,40,stmmac stmmac-platform dwmac-generic)
-endef
-
-$(eval $(call KernelPackage,stmmac-core))
-
-define KernelPackage/dwmac-imx
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=NXP i.MX8 Ethernet controller
- DEPENDS:=+kmod-stmmac-core
- KCONFIG:=CONFIG_DWMAC_IMX8
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.ko
- AUTOLOAD=$(call AutoLoad,45,dwmac-imx)
-endef
-
-$(eval $(call KernelPackage,dwmac-imx))
-
-define KernelPackage/dwmac-sun8i
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=Allwinner H3/A83T/A64 (sun8i) Ethernet
- DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
- KCONFIG:=CONFIG_DWMAC_SUN8I
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.ko
- AUTOLOAD=$(call AutoLoad,45,dwmac-sun8i)
-endef
-
-$(eval $(call KernelPackage,dwmac-sun8i))
-
-define KernelPackage/dwmac-rockchip
- SUBMENU=$(NETWORK_DEVICES_MENU)
- TITLE:=Rockchip RK3328/RK3399/RK3568 Ethernet
- DEPENDS:=+kmod-stmmac-core +kmod-mdio-bus-mux
- KCONFIG:=CONFIG_DWMAC_ROCKCHIP
- FILES=$(LINUX_DIR)/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.ko
- AUTOLOAD=$(call AutoLoad,45,dwmac-rk)
-endef
-
-$(eval $(call KernelPackage,dwmac-rockchip))
-
-define KernelPackage/thunderx-net
- SUBMENU:=$(NETWORK_DEVICES_MENU)
- TITLE:=Marvell (Cavium) ThunderX/2 network drivers
- DEPENDS:=@(TARGET_armvirt_64) +kmod-phylink +kmod-of-mdio
- KCONFIG:=CONFIG_NET_VENDOR_CAVIUM \
- CONFIG_THUNDER_NIC_PF \
- CONFIG_THUNDER_NIC_VF \
- CONFIG_THUNDER_NIC_BGX \
- CONFIG_THUNDER_NIC_RGX
- FILES=$(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicvf.ko \
- $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/nicpf.ko \
- $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_xcv.ko \
- $(LINUX_DIR)/drivers/net/ethernet/cavium/thunder/thunder_bgx.ko
- AUTOLOAD=$(call AutoLoad,40,nicpf nicvf thunder_xcv thunder_bgx)
-endef
-
-$(eval $(call KernelPackage,thunderx-net))
-
-define KernelPackage/wdt-sp805
- SUBMENU:=$(OTHER_MENU)
- TITLE:=ARM SP805 Watchdog
- KCONFIG:=CONFIG_ARM_SP805_WATCHDOG
- FILES=$(LINUX_DIR)/drivers/watchdog/sp805_wdt.ko
- AUTOLOAD=$(call AutoLoad,50,sp805_wdt)
-endef
-
-define KernelPackage/wdt-sp805/description
- Support for the ARM SP805 wathchdog module.
- This is present in the NXP Layerscape family,
- HiSilicon HI3660 among others.
-endef
-
-$(eval $(call KernelPackage,wdt-sp805))
-
+++ /dev/null
-From b77c0ecdc7915e5c5c515da1aa6cfaf6f4eb8351 Mon Sep 17 00:00:00 2001
-From: Mathew McBride <matt@traverse.com.au>
-Date: Wed, 28 Sep 2022 16:39:31 +1000
-Subject: [PATCH] arm: disable code size reduction measures
- (gc-sections,-f*-sections)
-
-This interferes with the EFI boot stub on armv7l.
-
-Signed-off-by: Mathew McBride <matt@traverse.com.au>
----
- arch/arm/Kconfig | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -122,7 +122,6 @@ config ARM
- select HAVE_UID16
- select HAVE_VIRT_CPU_ACCOUNTING_GEN
- select IRQ_FORCED_THREADING
-- select HAVE_LD_DEAD_CODE_DATA_ELIMINATION
- select MODULES_USE_ELF_REL
- select NEED_DMA_MAP_STATE
- select OF_EARLY_FLATTREE if OF
+++ /dev/null
-From f3763a0c1b07273218cbf5886bdf8df9df501111 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:10 +0200
-Subject: [PATCH 03/14] net: dpaa2-eth: don't use -ENOTSUPP error code
-
-dpaa2_eth_setup_dpni() is called from the probe path and
-dpaa2_eth_set_link_ksettings() is propagated to user space.
-
-include/linux/errno.h says that ENOTSUPP is "Defined for the NFSv3
-protocol". Conventional wisdom has it to not use it in networking
-drivers. Replace it with -EOPNOTSUPP.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 2 +-
- drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -3613,7 +3613,7 @@ static int dpaa2_eth_setup_dpni(struct f
- dev_err(dev, "DPNI version %u.%u not supported, need >= %u.%u\n",
- priv->dpni_ver_major, priv->dpni_ver_minor,
- DPNI_VER_MAJOR, DPNI_VER_MINOR);
-- err = -ENOTSUPP;
-+ err = -EOPNOTSUPP;
- goto close;
- }
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -118,7 +118,7 @@ dpaa2_eth_set_link_ksettings(struct net_
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-
- if (!dpaa2_eth_is_type_phy(priv))
-- return -ENOTSUPP;
-+ return -EOPNOTSUPP;
-
- return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
- }
+++ /dev/null
-From 022a11062261dc4703da846d3bf4d194ef6bebf5 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:11 +0200
-Subject: [PATCH 04/14] net: dpaa2: replace dpaa2_mac_is_type_fixed() with
- dpaa2_mac_is_type_phy()
-
-dpaa2_mac_is_type_fixed() is a header with no implementation and no
-callers, which is referenced from the documentation though. It can be
-deleted.
-
-On the other hand, it would be useful to reuse the code between
-dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
-code should be called dpaa2_mac_is_type_phy(), so let's create that.
-
-The removal and the addition are merged into the same patch because,
-in fact, is_type_phy() is the logical opposite of is_type_fixed().
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../ethernet/freescale/dpaa2/mac-phy-support.rst | 9 ++++++---
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h | 7 +------
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h | 10 ++++++++--
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h | 7 +------
- 4 files changed, 16 insertions(+), 17 deletions(-)
-
---- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
-+++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
-@@ -181,10 +181,13 @@ when necessary using the below listed AP
- - int dpaa2_mac_connect(struct dpaa2_mac *mac);
- - void dpaa2_mac_disconnect(struct dpaa2_mac *mac);
-
--A phylink integration is necessary only when the partner DPMAC is not of TYPE_FIXED.
--One can check for this condition using the below API::
-+A phylink integration is necessary only when the partner DPMAC is not of
-+``TYPE_FIXED``. This means it is either of ``TYPE_PHY``, or of
-+``TYPE_BACKPLANE`` (the difference being the two that in the ``TYPE_BACKPLANE``
-+mode, the MC firmware does not access the PCS registers). One can check for
-+this condition using the following helper::
-
-- - bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,struct fsl_mc_io *mc_io);
-+ - static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac);
-
- Before connection to a MAC, the caller must allocate and populate the
- dpaa2_mac structure with the associated net_device, a pointer to the MC portal
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -733,12 +733,7 @@ static inline unsigned int dpaa2_eth_rx_
-
- static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
- {
-- if (priv->mac &&
-- (priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
-- priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
-- return true;
--
-- return false;
-+ return dpaa2_mac_is_type_phy(priv->mac);
- }
-
- static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
-@@ -30,8 +30,14 @@ struct dpaa2_mac {
- struct phy *serdes_phy;
- };
-
--bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,
-- struct fsl_mc_io *mc_io);
-+static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac)
-+{
-+ if (!mac)
-+ return false;
-+
-+ return mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
-+ mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE;
-+}
-
- int dpaa2_mac_open(struct dpaa2_mac *mac);
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-@@ -230,12 +230,7 @@ static inline bool dpaa2_switch_supports
- static inline bool
- dpaa2_switch_port_is_type_phy(struct ethsw_port_priv *port_priv)
- {
-- if (port_priv->mac &&
-- (port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
-- port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
-- return true;
--
-- return false;
-+ return dpaa2_mac_is_type_phy(port_priv->mac);
- }
-
- static inline bool dpaa2_switch_port_has_mac(struct ethsw_port_priv *port_priv)
+++ /dev/null
-From 97c07369ab8bf9895e05d4b468f18e6567263154 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:12 +0200
-Subject: [PATCH 05/14] net: dpaa2-mac: absorb phylink_start() call into
- dpaa2_mac_start()
-
-The phylink handling is intended to be hidden inside the dpaa2_mac
-object. Move the phylink_start() call into dpaa2_mac_start(), and
-phylink_stop() into dpaa2_mac_stop().
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 5 +----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 8 ++++++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 5 +----
- 3 files changed, 10 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -2082,10 +2082,8 @@ static int dpaa2_eth_open(struct net_dev
- goto enable_err;
- }
-
-- if (dpaa2_eth_is_type_phy(priv)) {
-+ if (dpaa2_eth_is_type_phy(priv))
- dpaa2_mac_start(priv->mac);
-- phylink_start(priv->mac->phylink);
-- }
-
- return 0;
-
-@@ -2159,7 +2157,6 @@ static int dpaa2_eth_stop(struct net_dev
- int retries = 10;
-
- if (dpaa2_eth_is_type_phy(priv)) {
-- phylink_stop(priv->mac->phylink);
- dpaa2_mac_stop(priv->mac);
- } else {
- netif_tx_stop_all_queues(net_dev);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -336,12 +336,20 @@ static void dpaa2_mac_set_supported_inte
-
- void dpaa2_mac_start(struct dpaa2_mac *mac)
- {
-+ ASSERT_RTNL();
-+
- if (mac->serdes_phy)
- phy_power_on(mac->serdes_phy);
-+
-+ phylink_start(mac->phylink);
- }
-
- void dpaa2_mac_stop(struct dpaa2_mac *mac)
- {
-+ ASSERT_RTNL();
-+
-+ phylink_stop(mac->phylink);
-+
- if (mac->serdes_phy)
- phy_power_off(mac->serdes_phy);
- }
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -703,10 +703,8 @@ static int dpaa2_switch_port_open(struct
-
- dpaa2_switch_enable_ctrl_if_napi(ethsw);
-
-- if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ if (dpaa2_switch_port_is_type_phy(port_priv))
- dpaa2_mac_start(port_priv->mac);
-- phylink_start(port_priv->mac->phylink);
-- }
-
- return 0;
- }
-@@ -718,7 +716,6 @@ static int dpaa2_switch_port_stop(struct
- int err;
-
- if (dpaa2_switch_port_is_type_phy(port_priv)) {
-- phylink_stop(port_priv->mac->phylink);
- dpaa2_mac_stop(port_priv->mac);
- } else {
- netif_tx_stop_all_queues(netdev);
+++ /dev/null
-From 095ef388f714d622aa503fcccf20dc4095b72762 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:13 +0200
-Subject: [PATCH 06/14] net: dpaa2-mac: remove defensive check in
- dpaa2_mac_disconnect()
-
-dpaa2_mac_disconnect() will only be called with a NULL mac->phylink if
-dpaa2_mac_connect() failed, or was never called.
-
-The callers are these:
-
-dpaa2_eth_disconnect_mac():
-
- if (dpaa2_eth_is_type_phy(priv))
- dpaa2_mac_disconnect(priv->mac);
-
-dpaa2_switch_port_disconnect_mac():
-
- if (dpaa2_switch_port_is_type_phy(port_priv))
- dpaa2_mac_disconnect(port_priv->mac);
-
-priv->mac can be NULL, but in that case, dpaa2_eth_is_type_phy() returns
-false, and dpaa2_mac_disconnect() is never called. Similar for
-dpaa2-switch.
-
-When priv->mac is non-NULL, it means that dpaa2_mac_connect() returned
-zero (success), and therefore, priv->mac->phylink is also a valid
-pointer.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -446,9 +446,6 @@ err_pcs_destroy:
-
- void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
- {
-- if (!mac->phylink)
-- return;
--
- phylink_disconnect_phy(mac->phylink);
- phylink_destroy(mac->phylink);
- dpaa2_pcs_destroy(mac);
+++ /dev/null
-From 06efc9b8a1360cad83cae6e71558e5458cc1fbf3 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:14 +0200
-Subject: [PATCH 07/14] net: dpaa2-eth: assign priv->mac after
- dpaa2_mac_connect() call
-
-There are 2 requirements for correct code:
-
-- Any time the driver accesses the priv->mac pointer at runtime, it
- either holds NULL to indicate a DPNI-DPNI connection (or unconnected
- DPNI), or a struct dpaa2_mac whose phylink instance was fully
- initialized (created and connected to the PHY). No changes are made to
- priv->mac while it is being used. Currently, rtnl_lock() watches over
- the call to dpaa2_eth_connect_mac(), so it serves the purpose of
- serializing this with all readers of priv->mac.
-
-- dpaa2_mac_connect() should run unlocked, because inside it are 2
- phylink calls with incompatible locking requirements: phylink_create()
- requires that the rtnl_mutex isn't held, and phylink_fwnode_phy_connect()
- requires that the rtnl_mutex is held. The only way to solve those
- contradictory requirements is to let dpaa2_mac_connect() take
- rtnl_lock() when it needs to.
-
-To solve both requirements, we need to identify the writer side of the
-priv->mac pointer, which can be wrapped in a mutex private to the driver
-in a future patch. The dpaa2_mac_connect() cannot be part of the writer
-side critical section, because of an AB/BA deadlock with rtnl_lock().
-
-So the strategy needs to be that where we prepare the DPMAC by calling
-dpaa2_mac_connect(), and only make priv->mac point to it once it's fully
-prepared. This ensures that the writer side critical section has the
-absolute minimum surface it can.
-
-The reverse strategy is adopted in the dpaa2_eth_disconnect_mac() code
-path. This makes sure that priv->mac is NULL when we start tearing down
-the DPMAC that we disconnected from, and concurrent code will simply not
-see it.
-
-No locking changes in this patch (concurrent code is still blocked by
-the rtnl_mutex).
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 21 +++++++++++--------
- 1 file changed, 12 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -4443,9 +4443,8 @@ static int dpaa2_eth_connect_mac(struct
- err = dpaa2_mac_open(mac);
- if (err)
- goto err_free_mac;
-- priv->mac = mac;
-
-- if (dpaa2_eth_is_type_phy(priv)) {
-+ if (dpaa2_mac_is_type_phy(mac)) {
- err = dpaa2_mac_connect(mac);
- if (err && err != -EPROBE_DEFER)
- netdev_err(priv->net_dev, "Error connecting to the MAC endpoint: %pe",
-@@ -4454,11 +4453,12 @@ static int dpaa2_eth_connect_mac(struct
- goto err_close_mac;
- }
-
-+ priv->mac = mac;
-+
- return 0;
-
- err_close_mac:
- dpaa2_mac_close(mac);
-- priv->mac = NULL;
- err_free_mac:
- kfree(mac);
- return err;
-@@ -4466,15 +4466,18 @@ err_free_mac:
-
- static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
- {
-- if (dpaa2_eth_is_type_phy(priv))
-- dpaa2_mac_disconnect(priv->mac);
-+ struct dpaa2_mac *mac = priv->mac;
-+
-+ priv->mac = NULL;
-
-- if (!dpaa2_eth_has_mac(priv))
-+ if (!mac)
- return;
-
-- dpaa2_mac_close(priv->mac);
-- kfree(priv->mac);
-- priv->mac = NULL;
-+ if (dpaa2_mac_is_type_phy(mac))
-+ dpaa2_mac_disconnect(mac);
-+
-+ dpaa2_mac_close(mac);
-+ kfree(mac);
- }
-
- static irqreturn_t dpni_irq0_handler_thread(int irq_num, void *arg)
+++ /dev/null
-From a5e7f7e277bd4403c45c1c7922d56d0eb08dbc7c Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:15 +0200
-Subject: [PATCH 08/14] net: dpaa2-switch: assign port_priv->mac after
- dpaa2_mac_connect() call
-
-The dpaa2-switch has the exact same locking requirements when connected
-to a DPMAC, so it needs port_priv->mac to always point either to NULL,
-or to a DPMAC with a fully initialized phylink instance.
-
-Make the same preparatory change in the dpaa2-switch driver as in the
-dpaa2-eth one.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../ethernet/freescale/dpaa2/dpaa2-switch.c | 21 +++++++++++--------
- 1 file changed, 12 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -1450,9 +1450,8 @@ static int dpaa2_switch_port_connect_mac
- err = dpaa2_mac_open(mac);
- if (err)
- goto err_free_mac;
-- port_priv->mac = mac;
-
-- if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ if (dpaa2_mac_is_type_phy(mac)) {
- err = dpaa2_mac_connect(mac);
- if (err) {
- netdev_err(port_priv->netdev,
-@@ -1462,11 +1461,12 @@ static int dpaa2_switch_port_connect_mac
- }
- }
-
-+ port_priv->mac = mac;
-+
- return 0;
-
- err_close_mac:
- dpaa2_mac_close(mac);
-- port_priv->mac = NULL;
- err_free_mac:
- kfree(mac);
- return err;
-@@ -1474,15 +1474,18 @@ err_free_mac:
-
- static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
- {
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-- dpaa2_mac_disconnect(port_priv->mac);
-+ struct dpaa2_mac *mac = port_priv->mac;
-+
-+ port_priv->mac = NULL;
-
-- if (!dpaa2_switch_port_has_mac(port_priv))
-+ if (!mac)
- return;
-
-- dpaa2_mac_close(port_priv->mac);
-- kfree(port_priv->mac);
-- port_priv->mac = NULL;
-+ if (dpaa2_mac_is_type_phy(mac))
-+ dpaa2_mac_disconnect(mac);
-+
-+ dpaa2_mac_close(mac);
-+ kfree(mac);
- }
-
- static irqreturn_t dpaa2_switch_irq0_handler_thread(int irq_num, void *arg)
+++ /dev/null
-From ce44b6ed9ee65efa9b3025552c513842eabcab88 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:16 +0200
-Subject: [PATCH 09/14] net: dpaa2: publish MAC stringset to ethtool -S even if
- MAC is missing
-
-DPNIs and DPSW objects can connect and disconnect at runtime from DPMAC
-objects on the same fsl-mc bus. The DPMAC object also holds "ethtool -S"
-unstructured counters. Those counters are only shown for the entity
-owning the netdev (DPNI, DPSW) if it's connected to a DPMAC.
-
-The ethtool stringset code path is split into multiple callbacks, but
-currently, connecting and disconnecting the DPMAC takes the rtnl_lock().
-This blocks the entire ethtool code path from running, see
-ethnl_default_doit() -> rtnl_lock() -> ops->prepare_data() ->
-strset_prepare_data().
-
-This is going to be a problem if we are going to no longer require
-rtnl_lock() when connecting/disconnecting the DPMAC, because the DPMAC
-could appear between ops->get_sset_count() and ops->get_strings().
-If it appears out of the blue, we will provide a stringset into an array
-that was dimensioned thinking the DPMAC wouldn't be there => array
-accessed out of bounds.
-
-There isn't really a good way to work around that, and I don't want to
-put too much pressure on the ethtool framework by playing locking games.
-Just make the DPMAC counters be always available. They'll be zeroes if
-the DPNI or DPSW isn't connected to a DPMAC.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Andrew Lunn <andrew@lunn.ch>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c | 12 +++---------
- .../ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 11 ++---------
- 2 files changed, 5 insertions(+), 18 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -186,7 +186,6 @@ static int dpaa2_eth_set_pauseparam(stru
- static void dpaa2_eth_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
- {
-- struct dpaa2_eth_priv *priv = netdev_priv(netdev);
- u8 *p = data;
- int i;
-
-@@ -200,22 +199,17 @@ static void dpaa2_eth_get_strings(struct
- strscpy(p, dpaa2_ethtool_extras[i], ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
-- if (dpaa2_eth_has_mac(priv))
-- dpaa2_mac_get_strings(p);
-+ dpaa2_mac_get_strings(p);
- break;
- }
- }
-
- static int dpaa2_eth_get_sset_count(struct net_device *net_dev, int sset)
- {
-- int num_ss_stats = DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS;
-- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
--
- switch (sset) {
- case ETH_SS_STATS: /* ethtool_get_stats(), ethtool_get_drvinfo() */
-- if (dpaa2_eth_has_mac(priv))
-- num_ss_stats += dpaa2_mac_get_sset_count();
-- return num_ss_stats;
-+ return DPAA2_ETH_NUM_STATS + DPAA2_ETH_NUM_EXTRA_STATS +
-+ dpaa2_mac_get_sset_count();
- default:
- return -EOPNOTSUPP;
- }
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-@@ -145,14 +145,9 @@ dpaa2_switch_set_link_ksettings(struct n
- static int
- dpaa2_switch_ethtool_get_sset_count(struct net_device *netdev, int sset)
- {
-- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
-- int num_ss_stats = DPAA2_SWITCH_NUM_COUNTERS;
--
- switch (sset) {
- case ETH_SS_STATS:
-- if (port_priv->mac)
-- num_ss_stats += dpaa2_mac_get_sset_count();
-- return num_ss_stats;
-+ return DPAA2_SWITCH_NUM_COUNTERS + dpaa2_mac_get_sset_count();
- default:
- return -EOPNOTSUPP;
- }
-@@ -161,7 +156,6 @@ dpaa2_switch_ethtool_get_sset_count(stru
- static void dpaa2_switch_ethtool_get_strings(struct net_device *netdev,
- u32 stringset, u8 *data)
- {
-- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
- u8 *p = data;
- int i;
-
-@@ -172,8 +166,7 @@ static void dpaa2_switch_ethtool_get_str
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
-- if (port_priv->mac)
-- dpaa2_mac_get_strings(p);
-+ dpaa2_mac_get_strings(p);
- break;
- }
- }
+++ /dev/null
-From c838d9fd7e6ba9ddd6006bf0a296396266e9f121 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:17 +0200
-Subject: [PATCH 10/14] net: dpaa2-switch replace direct MAC access with
- dpaa2_switch_port_has_mac()
-
-The helper function will gain a lockdep annotation in a future patch.
-Make sure to benefit from it.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-@@ -189,7 +189,7 @@ static void dpaa2_switch_ethtool_get_sta
- dpaa2_switch_ethtool_counters[i].name, err);
- }
-
-- if (port_priv->mac)
-+ if (dpaa2_switch_port_has_mac(port_priv))
- dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
- }
-
+++ /dev/null
-From e0ea63162cb5f1ca7f844d6ef5fc4079448ee2d5 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:18 +0200
-Subject: [PATCH 11/14] net: dpaa2-eth: connect to MAC before requesting the
- "endpoint changed" IRQ
-
-dpaa2_eth_connect_mac() is called both from dpaa2_eth_probe() and from
-dpni_irq0_handler_thread().
-
-It could happen that the DPNI gets connected to a DPMAC on the fsl-mc
-bus exactly during probe, as soon as the "endpoint change" interrupt is
-requested in dpaa2_eth_setup_irqs(). This will cause the
-dpni_irq0_handler_thread() to register a phylink instance for that DPMAC.
-
-Then, the probing function will also try to register a phylink instance
-for the same DPMAC, operation which should fail (and this will fail the
-probing of the driver).
-
-Reorder dpaa2_eth_setup_irqs() and dpaa2_eth_connect_mac(), such that
-dpni_irq0_handler_thread() never races with the DPMAC-related portion of
-the probing path.
-
-Also reorder dpaa2_eth_disconnect_mac() to be in the mirror position of
-dpaa2_eth_connect_mac() in the teardown path.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 18 +++++++++---------
- 1 file changed, 9 insertions(+), 9 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -4710,6 +4710,10 @@ static int dpaa2_eth_probe(struct fsl_mc
- }
- #endif
-
-+ err = dpaa2_eth_connect_mac(priv);
-+ if (err)
-+ goto err_connect_mac;
-+
- err = dpaa2_eth_setup_irqs(dpni_dev);
- if (err) {
- netdev_warn(net_dev, "Failed to set link interrupt, fall back to polling\n");
-@@ -4722,10 +4726,6 @@ static int dpaa2_eth_probe(struct fsl_mc
- priv->do_link_poll = true;
- }
-
-- err = dpaa2_eth_connect_mac(priv);
-- if (err)
-- goto err_connect_mac;
--
- err = dpaa2_eth_dl_alloc(priv);
- if (err)
- goto err_dl_register;
-@@ -4759,13 +4759,13 @@ err_dl_port_add:
- err_dl_trap_register:
- dpaa2_eth_dl_free(priv);
- err_dl_register:
-- dpaa2_eth_disconnect_mac(priv);
--err_connect_mac:
- if (priv->do_link_poll)
- kthread_stop(priv->poll_thread);
- else
- fsl_mc_free_irqs(dpni_dev);
- err_poll_thread:
-+ dpaa2_eth_disconnect_mac(priv);
-+err_connect_mac:
- dpaa2_eth_free_rings(priv);
- err_alloc_rings:
- err_csum:
-@@ -4813,9 +4813,6 @@ static int dpaa2_eth_remove(struct fsl_m
- #endif
-
- unregister_netdev(net_dev);
-- rtnl_lock();
-- dpaa2_eth_disconnect_mac(priv);
-- rtnl_unlock();
-
- dpaa2_eth_dl_port_del(priv);
- dpaa2_eth_dl_traps_unregister(priv);
-@@ -4826,6 +4823,9 @@ static int dpaa2_eth_remove(struct fsl_m
- else
- fsl_mc_free_irqs(ls_dev);
-
-+ rtnl_lock();
-+ dpaa2_eth_disconnect_mac(priv);
-+ rtnl_unlock();
- dpaa2_eth_free_rings(priv);
- free_percpu(priv->fd);
- free_percpu(priv->sgt_cache);
+++ /dev/null
-From 5e448a17dfa2e95166534df7f677a3694ef6187d Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:19 +0200
-Subject: [PATCH 12/14] net: dpaa2-eth: serialize changes to priv->mac with a
- mutex
-
-The dpaa2 architecture permits dynamic connections between objects on
-the fsl-mc bus, specifically between a DPNI object (represented by a
-struct net_device) and a DPMAC object (represented by a struct phylink).
-
-The DPNI driver is notified when those connections are created/broken
-through the dpni_irq0_handler_thread() method. To ensure that ethtool
-operations, as well as netdev up/down operations serialize with the
-connection/disconnection of the DPNI with a DPMAC,
-dpni_irq0_handler_thread() takes the rtnl_lock() to block those other
-operations from taking place.
-
-There is code called by dpaa2_mac_connect() which wants to acquire the
-rtnl_mutex once again, see phylink_create() -> phylink_register_sfp() ->
-sfp_bus_add_upstream() -> rtnl_lock(). So the strategy doesn't quite
-work out, even though it's fairly simple.
-
-Create a different strategy, where all code paths in the dpaa2-eth
-driver access priv->mac only while they are holding priv->mac_lock.
-The phylink instance is not created or connected to the PHY under the
-priv->mac_lock, but only assigned to priv->mac then. This will eliminate
-the reliance on the rtnl_mutex.
-
-Add lockdep annotations and put comments where holding the lock is not
-necessary, and priv->mac can be dereferenced freely.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.c | 43 ++++++++++++--
- .../net/ethernet/freescale/dpaa2/dpaa2-eth.h | 6 ++
- .../ethernet/freescale/dpaa2/dpaa2-ethtool.c | 58 +++++++++++++++----
- 3 files changed, 91 insertions(+), 16 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -2020,8 +2020,11 @@ static int dpaa2_eth_link_state_update(s
-
- /* When we manage the MAC/PHY using phylink there is no need
- * to manually update the netif_carrier.
-+ * We can avoid locking because we are called from the "link changed"
-+ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
-+ * (the writer to priv->mac), so we cannot race with it.
- */
-- if (dpaa2_eth_is_type_phy(priv))
-+ if (dpaa2_mac_is_type_phy(priv->mac))
- goto out;
-
- /* Chech link state; speed / duplex changes are not treated yet */
-@@ -2060,6 +2063,8 @@ static int dpaa2_eth_open(struct net_dev
- priv->dpbp_dev->obj_desc.id, priv->bpid);
- }
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (!dpaa2_eth_is_type_phy(priv)) {
- /* We'll only start the txqs when the link is actually ready;
- * make sure we don't race against the link up notification,
-@@ -2078,6 +2083,7 @@ static int dpaa2_eth_open(struct net_dev
-
- err = dpni_enable(priv->mc_io, 0, priv->mc_token);
- if (err < 0) {
-+ mutex_unlock(&priv->mac_lock);
- netdev_err(net_dev, "dpni_enable() failed\n");
- goto enable_err;
- }
-@@ -2085,6 +2091,8 @@ static int dpaa2_eth_open(struct net_dev
- if (dpaa2_eth_is_type_phy(priv))
- dpaa2_mac_start(priv->mac);
-
-+ mutex_unlock(&priv->mac_lock);
-+
- return 0;
-
- enable_err:
-@@ -2156,6 +2164,8 @@ static int dpaa2_eth_stop(struct net_dev
- int dpni_enabled = 0;
- int retries = 10;
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (dpaa2_eth_is_type_phy(priv)) {
- dpaa2_mac_stop(priv->mac);
- } else {
-@@ -2163,6 +2173,8 @@ static int dpaa2_eth_stop(struct net_dev
- netif_carrier_off(net_dev);
- }
-
-+ mutex_unlock(&priv->mac_lock);
-+
- /* On dpni_disable(), the MC firmware will:
- * - stop MAC Rx and wait for all Rx frames to be enqueued to software
- * - cut off WRIOP dequeues from egress FQs and wait until transmission
-@@ -2488,12 +2500,20 @@ static int dpaa2_eth_ts_ioctl(struct net
- static int dpaa2_eth_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(dev);
-+ int err;
-
- if (cmd == SIOCSHWTSTAMP)
- return dpaa2_eth_ts_ioctl(dev, rq, cmd);
-
-- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv)) {
-+ err = phylink_mii_ioctl(priv->mac->phylink, rq, cmd);
-+ mutex_unlock(&priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&priv->mac_lock);
-
- return -EOPNOTSUPP;
- }
-@@ -4453,7 +4473,9 @@ static int dpaa2_eth_connect_mac(struct
- goto err_close_mac;
- }
-
-+ mutex_lock(&priv->mac_lock);
- priv->mac = mac;
-+ mutex_unlock(&priv->mac_lock);
-
- return 0;
-
-@@ -4466,9 +4488,12 @@ err_free_mac:
-
- static void dpaa2_eth_disconnect_mac(struct dpaa2_eth_priv *priv)
- {
-- struct dpaa2_mac *mac = priv->mac;
-+ struct dpaa2_mac *mac;
-
-+ mutex_lock(&priv->mac_lock);
-+ mac = priv->mac;
- priv->mac = NULL;
-+ mutex_unlock(&priv->mac_lock);
-
- if (!mac)
- return;
-@@ -4487,6 +4512,7 @@ static irqreturn_t dpni_irq0_handler_thr
- struct fsl_mc_device *dpni_dev = to_fsl_mc_device(dev);
- struct net_device *net_dev = dev_get_drvdata(dev);
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ bool had_mac;
- int err;
-
- err = dpni_get_irq_status(dpni_dev->mc_io, 0, dpni_dev->mc_handle,
-@@ -4504,7 +4530,12 @@ static irqreturn_t dpni_irq0_handler_thr
- dpaa2_eth_update_tx_fqids(priv);
-
- rtnl_lock();
-- if (dpaa2_eth_has_mac(priv))
-+ /* We can avoid locking because the "endpoint changed" IRQ
-+ * handler is the only one who changes priv->mac at runtime,
-+ * so we are not racing with anyone.
-+ */
-+ had_mac = !!priv->mac;
-+ if (had_mac)
- dpaa2_eth_disconnect_mac(priv);
- else
- dpaa2_eth_connect_mac(priv);
-@@ -4605,6 +4636,8 @@ static int dpaa2_eth_probe(struct fsl_mc
- priv = netdev_priv(net_dev);
- priv->net_dev = net_dev;
-
-+ mutex_init(&priv->mac_lock);
-+
- priv->iommu_domain = iommu_get_domain_for_dev(dev);
-
- priv->tx_tstamp_type = HWTSTAMP_TX_OFF;
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
-@@ -580,6 +580,8 @@ struct dpaa2_eth_priv {
- #endif
-
- struct dpaa2_mac *mac;
-+ /* Serializes changes to priv->mac */
-+ struct mutex mac_lock;
- struct workqueue_struct *dpaa2_ptp_wq;
- struct work_struct tx_onestep_tstamp;
- struct sk_buff_head tx_skbs;
-@@ -733,11 +735,15 @@ static inline unsigned int dpaa2_eth_rx_
-
- static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
- {
-+ lockdep_assert_held(&priv->mac_lock);
-+
- return dpaa2_mac_is_type_phy(priv->mac);
- }
-
- static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
- {
-+ lockdep_assert_held(&priv->mac_lock);
-+
- return priv->mac ? true : false;
- }
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-ethtool.c
-@@ -86,11 +86,16 @@ static void dpaa2_eth_get_drvinfo(struct
- static int dpaa2_eth_nway_reset(struct net_device *net_dev)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ int err = -EOPNOTSUPP;
-+
-+ mutex_lock(&priv->mac_lock);
-
- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_ethtool_nway_reset(priv->mac->phylink);
-+ err = phylink_ethtool_nway_reset(priv->mac->phylink);
-+
-+ mutex_unlock(&priv->mac_lock);
-
-- return -EOPNOTSUPP;
-+ return err;
- }
-
- static int
-@@ -98,10 +103,18 @@ dpaa2_eth_get_link_ksettings(struct net_
- struct ethtool_link_ksettings *link_settings)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ int err;
-
-- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_ethtool_ksettings_get(priv->mac->phylink,
-- link_settings);
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv)) {
-+ err = phylink_ethtool_ksettings_get(priv->mac->phylink,
-+ link_settings);
-+ mutex_unlock(&priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&priv->mac_lock);
-
- link_settings->base.autoneg = AUTONEG_DISABLE;
- if (!(priv->link_state.options & DPNI_LINK_OPT_HALF_DUPLEX))
-@@ -116,11 +129,17 @@ dpaa2_eth_set_link_ksettings(struct net_
- const struct ethtool_link_ksettings *link_settings)
- {
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-+ int err = -EOPNOTSUPP;
-
-- if (!dpaa2_eth_is_type_phy(priv))
-- return -EOPNOTSUPP;
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv))
-+ err = phylink_ethtool_ksettings_set(priv->mac->phylink,
-+ link_settings);
-
-- return phylink_ethtool_ksettings_set(priv->mac->phylink, link_settings);
-+ mutex_unlock(&priv->mac_lock);
-+
-+ return err;
- }
-
- static void dpaa2_eth_get_pauseparam(struct net_device *net_dev,
-@@ -129,11 +148,16 @@ static void dpaa2_eth_get_pauseparam(str
- struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
- u64 link_options = priv->link_state.options;
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (dpaa2_eth_is_type_phy(priv)) {
- phylink_ethtool_get_pauseparam(priv->mac->phylink, pause);
-+ mutex_unlock(&priv->mac_lock);
- return;
- }
-
-+ mutex_unlock(&priv->mac_lock);
-+
- pause->rx_pause = dpaa2_eth_rx_pause_enabled(link_options);
- pause->tx_pause = dpaa2_eth_tx_pause_enabled(link_options);
- pause->autoneg = AUTONEG_DISABLE;
-@@ -152,9 +176,17 @@ static int dpaa2_eth_set_pauseparam(stru
- return -EOPNOTSUPP;
- }
-
-- if (dpaa2_eth_is_type_phy(priv))
-- return phylink_ethtool_set_pauseparam(priv->mac->phylink,
-- pause);
-+ mutex_lock(&priv->mac_lock);
-+
-+ if (dpaa2_eth_is_type_phy(priv)) {
-+ err = phylink_ethtool_set_pauseparam(priv->mac->phylink,
-+ pause);
-+ mutex_unlock(&priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&priv->mac_lock);
-+
- if (pause->autoneg)
- return -EOPNOTSUPP;
-
-@@ -309,8 +341,12 @@ static void dpaa2_eth_get_ethtool_stats(
- }
- *(data + i++) = buf_cnt;
-
-+ mutex_lock(&priv->mac_lock);
-+
- if (dpaa2_eth_has_mac(priv))
- dpaa2_mac_get_ethtool_stats(priv->mac, data + i);
-+
-+ mutex_unlock(&priv->mac_lock);
- }
-
- static int dpaa2_eth_prep_eth_rule(struct ethhdr *eth_value, struct ethhdr *eth_mask,
+++ /dev/null
-From 80d12452a5f160c39d63efc1be07df36f9d07133 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:20 +0200
-Subject: [PATCH 13/14] net: dpaa2-switch: serialize changes to priv->mac with
- a mutex
-
-The dpaa2-switch driver uses a DPMAC in the same way as the dpaa2-eth
-driver, so we need to duplicate the locking solution established by the
-previous change to the switch driver as well.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- .../freescale/dpaa2/dpaa2-switch-ethtool.c | 32 +++++++++++++++----
- .../ethernet/freescale/dpaa2/dpaa2-switch.c | 31 ++++++++++++++++--
- .../ethernet/freescale/dpaa2/dpaa2-switch.h | 2 ++
- 3 files changed, 55 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch-ethtool.c
-@@ -60,11 +60,18 @@ dpaa2_switch_get_link_ksettings(struct n
- {
- struct ethsw_port_priv *port_priv = netdev_priv(netdev);
- struct dpsw_link_state state = {0};
-- int err = 0;
-+ int err;
-
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-- return phylink_ethtool_ksettings_get(port_priv->mac->phylink,
-- link_ksettings);
-+ mutex_lock(&port_priv->mac_lock);
-+
-+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ err = phylink_ethtool_ksettings_get(port_priv->mac->phylink,
-+ link_ksettings);
-+ mutex_unlock(&port_priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&port_priv->mac_lock);
-
- err = dpsw_if_get_link_state(port_priv->ethsw_data->mc_io, 0,
- port_priv->ethsw_data->dpsw_handle,
-@@ -99,9 +106,16 @@ dpaa2_switch_set_link_ksettings(struct n
- bool if_running;
- int err = 0, ret;
-
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-- return phylink_ethtool_ksettings_set(port_priv->mac->phylink,
-- link_ksettings);
-+ mutex_lock(&port_priv->mac_lock);
-+
-+ if (dpaa2_switch_port_is_type_phy(port_priv)) {
-+ err = phylink_ethtool_ksettings_set(port_priv->mac->phylink,
-+ link_ksettings);
-+ mutex_unlock(&port_priv->mac_lock);
-+ return err;
-+ }
-+
-+ mutex_unlock(&port_priv->mac_lock);
-
- /* Interface needs to be down to change link settings */
- if_running = netif_running(netdev);
-@@ -189,8 +203,12 @@ static void dpaa2_switch_ethtool_get_sta
- dpaa2_switch_ethtool_counters[i].name, err);
- }
-
-+ mutex_lock(&port_priv->mac_lock);
-+
- if (dpaa2_switch_port_has_mac(port_priv))
- dpaa2_mac_get_ethtool_stats(port_priv->mac, data + i);
-+
-+ mutex_unlock(&port_priv->mac_lock);
- }
-
- const struct ethtool_ops dpaa2_switch_port_ethtool_ops = {
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -603,8 +603,11 @@ static int dpaa2_switch_port_link_state_
-
- /* When we manage the MAC/PHY using phylink there is no need
- * to manually update the netif_carrier.
-+ * We can avoid locking because we are called from the "link changed"
-+ * IRQ handler, which is the same as the "endpoint changed" IRQ handler
-+ * (the writer to port_priv->mac), so we cannot race with it.
- */
-- if (dpaa2_switch_port_is_type_phy(port_priv))
-+ if (dpaa2_mac_is_type_phy(port_priv->mac))
- return 0;
-
- /* Interrupts are received even though no one issued an 'ifconfig up'
-@@ -684,6 +687,8 @@ static int dpaa2_switch_port_open(struct
- struct ethsw_core *ethsw = port_priv->ethsw_data;
- int err;
-
-+ mutex_lock(&port_priv->mac_lock);
-+
- if (!dpaa2_switch_port_is_type_phy(port_priv)) {
- /* Explicitly set carrier off, otherwise
- * netif_carrier_ok() will return true and cause 'ip link show'
-@@ -697,6 +702,7 @@ static int dpaa2_switch_port_open(struct
- port_priv->ethsw_data->dpsw_handle,
- port_priv->idx);
- if (err) {
-+ mutex_unlock(&port_priv->mac_lock);
- netdev_err(netdev, "dpsw_if_enable err %d\n", err);
- return err;
- }
-@@ -706,6 +712,8 @@ static int dpaa2_switch_port_open(struct
- if (dpaa2_switch_port_is_type_phy(port_priv))
- dpaa2_mac_start(port_priv->mac);
-
-+ mutex_unlock(&port_priv->mac_lock);
-+
- return 0;
- }
-
-@@ -715,6 +723,8 @@ static int dpaa2_switch_port_stop(struct
- struct ethsw_core *ethsw = port_priv->ethsw_data;
- int err;
-
-+ mutex_lock(&port_priv->mac_lock);
-+
- if (dpaa2_switch_port_is_type_phy(port_priv)) {
- dpaa2_mac_stop(port_priv->mac);
- } else {
-@@ -722,6 +732,8 @@ static int dpaa2_switch_port_stop(struct
- netif_carrier_off(netdev);
- }
-
-+ mutex_unlock(&port_priv->mac_lock);
-+
- err = dpsw_if_disable(port_priv->ethsw_data->mc_io, 0,
- port_priv->ethsw_data->dpsw_handle,
- port_priv->idx);
-@@ -1461,7 +1473,9 @@ static int dpaa2_switch_port_connect_mac
- }
- }
-
-+ mutex_lock(&port_priv->mac_lock);
- port_priv->mac = mac;
-+ mutex_unlock(&port_priv->mac_lock);
-
- return 0;
-
-@@ -1474,9 +1488,12 @@ err_free_mac:
-
- static void dpaa2_switch_port_disconnect_mac(struct ethsw_port_priv *port_priv)
- {
-- struct dpaa2_mac *mac = port_priv->mac;
-+ struct dpaa2_mac *mac;
-
-+ mutex_lock(&port_priv->mac_lock);
-+ mac = port_priv->mac;
- port_priv->mac = NULL;
-+ mutex_unlock(&port_priv->mac_lock);
-
- if (!mac)
- return;
-@@ -1495,6 +1512,7 @@ static irqreturn_t dpaa2_switch_irq0_han
- struct ethsw_port_priv *port_priv;
- u32 status = ~0;
- int err, if_id;
-+ bool had_mac;
-
- err = dpsw_get_irq_status(ethsw->mc_io, 0, ethsw->dpsw_handle,
- DPSW_IRQ_INDEX_IF, &status);
-@@ -1513,7 +1531,12 @@ static irqreturn_t dpaa2_switch_irq0_han
-
- if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
- rtnl_lock();
-- if (dpaa2_switch_port_has_mac(port_priv))
-+ /* We can avoid locking because the "endpoint changed" IRQ
-+ * handler is the only one who changes priv->mac at runtime,
-+ * so we are not racing with anyone.
-+ */
-+ had_mac = !!port_priv->mac;
-+ if (had_mac)
- dpaa2_switch_port_disconnect_mac(port_priv);
- else
- dpaa2_switch_port_connect_mac(port_priv);
-@@ -3256,6 +3279,8 @@ static int dpaa2_switch_probe_port(struc
- port_priv->netdev = port_netdev;
- port_priv->ethsw_data = ethsw;
-
-+ mutex_init(&port_priv->mac_lock);
-+
- port_priv->idx = port_idx;
- port_priv->stp_state = BR_STATE_FORWARDING;
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
-@@ -161,6 +161,8 @@ struct ethsw_port_priv {
-
- struct dpaa2_switch_filter_block *filter_block;
- struct dpaa2_mac *mac;
-+ /* Protects against changes to port_priv->mac */
-+ struct mutex mac_lock;
- };
-
- /* Switch data */
+++ /dev/null
-From 4ea2faf5bb13d9ba9f07e996d495c4cbe34a4236 Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Tue, 29 Nov 2022 16:12:21 +0200
-Subject: [PATCH 14/14] net: dpaa2-mac: move rtnl_lock() only around
- phylink_{,dis}connect_phy()
-
-After the introduction of a private mac_lock that serializes access to
-priv->mac (and port_priv->mac in the switch), the only remaining purpose
-of rtnl_lock() is to satisfy the locking requirements of
-phylink_fwnode_phy_connect() and phylink_disconnect_phy().
-
-But the functions these live in, dpaa2_mac_connect() and
-dpaa2_mac_disconnect(), have contradictory locking requirements.
-While phylink_fwnode_phy_connect() wants rtnl_lock() to be held,
-phylink_create() wants it to not be held.
-
-Move the rtnl_lock() from top-level (in the dpaa2-eth and dpaa2-switch
-drivers) to only surround the phylink calls that require it, in the
-dpaa2-mac library code.
-
-This is possible because dpaa2_mac_connect() and dpaa2_mac_disconnect()
-run unlocked, and there isn't any danger of an AB/BA deadlock between
-the rtnl_mutex and other private locks.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
-Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
-Signed-off-by: Paolo Abeni <pabeni@redhat.com>
----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ----
- drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 5 +++++
- drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c | 4 ----
- 3 files changed, 5 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
-@@ -4529,7 +4529,6 @@ static irqreturn_t dpni_irq0_handler_thr
- dpaa2_eth_set_mac_addr(netdev_priv(net_dev));
- dpaa2_eth_update_tx_fqids(priv);
-
-- rtnl_lock();
- /* We can avoid locking because the "endpoint changed" IRQ
- * handler is the only one who changes priv->mac at runtime,
- * so we are not racing with anyone.
-@@ -4539,7 +4538,6 @@ static irqreturn_t dpni_irq0_handler_thr
- dpaa2_eth_disconnect_mac(priv);
- else
- dpaa2_eth_connect_mac(priv);
-- rtnl_unlock();
- }
-
- return IRQ_HANDLED;
-@@ -4856,9 +4854,7 @@ static int dpaa2_eth_remove(struct fsl_m
- else
- fsl_mc_free_irqs(ls_dev);
-
-- rtnl_lock();
- dpaa2_eth_disconnect_mac(priv);
-- rtnl_unlock();
- dpaa2_eth_free_rings(priv);
- free_percpu(priv->fd);
- free_percpu(priv->sgt_cache);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
-@@ -428,7 +428,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *
- }
- mac->phylink = phylink;
-
-+ rtnl_lock();
- err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0);
-+ rtnl_unlock();
- if (err) {
- netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err);
- goto err_phylink_destroy;
-@@ -446,7 +448,10 @@ err_pcs_destroy:
-
- void dpaa2_mac_disconnect(struct dpaa2_mac *mac)
- {
-+ rtnl_lock();
- phylink_disconnect_phy(mac->phylink);
-+ rtnl_unlock();
-+
- phylink_destroy(mac->phylink);
- dpaa2_pcs_destroy(mac);
- of_phy_put(mac->serdes_phy);
---- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.c
-@@ -1530,7 +1530,6 @@ static irqreturn_t dpaa2_switch_irq0_han
- }
-
- if (status & DPSW_IRQ_EVENT_ENDPOINT_CHANGED) {
-- rtnl_lock();
- /* We can avoid locking because the "endpoint changed" IRQ
- * handler is the only one who changes priv->mac at runtime,
- * so we are not racing with anyone.
-@@ -1540,7 +1539,6 @@ static irqreturn_t dpaa2_switch_irq0_han
- dpaa2_switch_port_disconnect_mac(port_priv);
- else
- dpaa2_switch_port_connect_mac(port_priv);
-- rtnl_unlock();
- }
-
- out:
-@@ -2958,9 +2956,7 @@ static void dpaa2_switch_remove_port(str
- {
- struct ethsw_port_priv *port_priv = ethsw->ports[port_idx];
-
-- rtnl_lock();
- dpaa2_switch_port_disconnect_mac(port_priv);
-- rtnl_unlock();
- free_netdev(port_priv->netdev);
- ethsw->ports[port_idx] = NULL;
- }
projects / openwrt / staging / xback.git / commitdiff