package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch

   1 --- /dev/null
   2 +++ b/configs/mt7986a_bpi-r3-emmc_defconfig
   3 @@ -0,0 +1,196 @@
   4 +CONFIG_ARM=y
   5 +CONFIG_POSITION_INDEPENDENT=y
   6 +CONFIG_ARCH_MEDIATEK=y
   7 +CONFIG_TARGET_MT7986=y
   8 +CONFIG_TEXT_BASE=0x41e00000
   9 +CONFIG_SYS_MALLOC_F_LEN=0x4000
  10 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
  11 +CONFIG_NR_DRAM_BANKS=1
  12 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc"
  13 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_emmc_env"
  14 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb"
  15 +CONFIG_OF_LIBFDT_OVERLAY=y
  16 +CONFIG_DEBUG_UART_BASE=0x11002000
  17 +CONFIG_DEBUG_UART_CLOCK=40000000
  18 +CONFIG_DEBUG_UART=y
  19 +CONFIG_SYS_LOAD_ADDR=0x46000000
  20 +CONFIG_SMBIOS_PRODUCT_NAME=""
  21 +CONFIG_AUTOBOOT_KEYED=y
  22 +CONFIG_BOOTDELAY=30
  23 +CONFIG_AUTOBOOT_MENU_SHOW=y
  24 +CONFIG_CFB_CONSOLE_ANSI=y
  25 +CONFIG_BOARD_LATE_INIT=y
  26 +CONFIG_BUTTON=y
  27 +CONFIG_BUTTON_GPIO=y
  28 +CONFIG_GPIO_HOG=y
  29 +CONFIG_CMD_ENV_FLAGS=y
  30 +CONFIG_FIT=y
  31 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
  32 +CONFIG_LED=y
  33 +CONFIG_LED_BLINK=y
  34 +CONFIG_LED_GPIO=y
  35 +CONFIG_LOGLEVEL=7
  36 +CONFIG_LOG=y
  37 +CONFIG_SYS_PROMPT="MT7986> "
  38 +CONFIG_CMD_BOOTMENU=y
  39 +CONFIG_CMD_BOOTP=y
  40 +CONFIG_CMD_BUTTON=y
  41 +CONFIG_CMD_CACHE=y
  42 +CONFIG_CMD_CDP=y
  43 +CONFIG_CMD_CPU=y
  44 +CONFIG_CMD_DHCP=y
  45 +CONFIG_CMD_DM=y
  46 +CONFIG_CMD_DNS=y
  47 +CONFIG_CMD_ECHO=y
  48 +CONFIG_CMD_ENV_READMEM=y
  49 +CONFIG_CMD_ERASEENV=y
  50 +CONFIG_CMD_EXT4=y
  51 +CONFIG_CMD_FAT=y
  52 +CONFIG_CMD_FDT=y
  53 +CONFIG_CMD_FS_GENERIC=y
  54 +CONFIG_CMD_FS_UUID=y
  55 +CONFIG_CMD_GPIO=y
  56 +CONFIG_CMD_GPT=y
  57 +CONFIG_CMD_HASH=y
  58 +CONFIG_CMD_ITEST=y
  59 +CONFIG_CMD_LED=y
  60 +CONFIG_CMD_LICENSE=y
  61 +CONFIG_CMD_LINK_LOCAL=y
  62 +# CONFIG_CMD_MBR is not set
  63 +CONFIG_CMD_MMC=y
  64 +CONFIG_CMD_MTD=y
  65 +CONFIG_CMD_PCI=y
  66 +CONFIG_CMD_PSTORE=y
  67 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
  68 +CONFIG_CMD_SF_TEST=y
  69 +CONFIG_CMD_PING=y
  70 +CONFIG_CMD_PXE=y
  71 +CONFIG_CMD_PWM=y
  72 +CONFIG_CMD_SMC=y
  73 +CONFIG_CMD_TFTPBOOT=y
  74 +CONFIG_CMD_TFTPSRV=y
  75 +CONFIG_CMD_UBI=y
  76 +CONFIG_CMD_UBI_RENAME=y
  77 +CONFIG_CMD_UBIFS=y
  78 +CONFIG_CMD_ASKENV=y
  79 +CONFIG_CMD_PART=y
  80 +CONFIG_CMD_RARP=y
  81 +CONFIG_CMD_SETEXPR=y
  82 +CONFIG_CMD_SLEEP=y
  83 +CONFIG_CMD_SNTP=y
  84 +CONFIG_CMD_SOURCE=y
  85 +CONFIG_CMD_STRINGS=y
  86 +CONFIG_CMD_USB=y
  87 +CONFIG_CMD_UUID=y
  88 +CONFIG_DISPLAY_CPUINFO=y
  89 +CONFIG_DM_MMC=y
  90 +CONFIG_DM_MTD=y
  91 +CONFIG_DM_REGULATOR=y
  92 +CONFIG_DM_REGULATOR_FIXED=y
  93 +CONFIG_DM_REGULATOR_GPIO=y
  94 +CONFIG_DM_USB=y
  95 +CONFIG_DM_PWM=y
  96 +CONFIG_PWM_MTK=y
  97 +CONFIG_HUSH_PARSER=y
  98 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
  99 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 100 +CONFIG_VERSION_VARIABLE=y
 101 +CONFIG_PARTITION_UUIDS=y
 102 +CONFIG_NETCONSOLE=y
 103 +CONFIG_REGMAP=y
 104 +CONFIG_SYSCON=y
 105 +CONFIG_CLK=y
 106 +CONFIG_DM_GPIO=y
 107 +CONFIG_DM_SCSI=y
 108 +CONFIG_AHCI=y
 109 +CONFIG_AHCI_PCI=y
 110 +CONFIG_SCSI_AHCI=y
 111 +CONFIG_SCSI=y
 112 +CONFIG_CMD_SCSI=y
 113 +CONFIG_PHY=y
 114 +CONFIG_PHY_MTK_TPHY=y
 115 +CONFIG_PHY_FIXED=y
 116 +CONFIG_MTK_AHCI=y
 117 +CONFIG_DM_ETH=y
 118 +CONFIG_MEDIATEK_ETH=y
 119 +CONFIG_PCI=y
 120 +CONFIG_MTD=y
 121 +CONFIG_MTD_UBI_FASTMAP=y
 122 +CONFIG_DM_PCI=y
 123 +CONFIG_PCIE_MEDIATEK=y
 124 +CONFIG_PINCTRL=y
 125 +CONFIG_PINCONF=y
 126 +CONFIG_PINCTRL_MT7622=y
 127 +CONFIG_POWER_DOMAIN=y
 128 +CONFIG_PRE_CONSOLE_BUFFER=y
 129 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 130 +CONFIG_MTK_POWER_DOMAIN=y
 131 +CONFIG_RAM=y
 132 +CONFIG_DM_SERIAL=y
 133 +CONFIG_MTK_SERIAL=y
 134 +CONFIG_MMC=y
 135 +CONFIG_MMC_DEFAULT_DEV=1
 136 +CONFIG_MMC_HS200_SUPPORT=y
 137 +CONFIG_MMC_MTK=y
 138 +CONFIG_MMC_SUPPORTS_TUNING=y
 139 +CONFIG_SUPPORT_EMMC_BOOT=y
 140 +CONFIG_SPI=y
 141 +CONFIG_DM_SPI=y
 142 +CONFIG_MTK_SPI_NAND=y
 143 +CONFIG_MTK_SPI_NAND_MTD=y
 144 +CONFIG_SYSRESET_WATCHDOG=y
 145 +CONFIG_WDT_MTK=y
 146 +CONFIG_LZO=y
 147 +CONFIG_ZSTD=y
 148 +CONFIG_HEXDUMP=y
 149 +CONFIG_RANDOM_UUID=y
 150 +CONFIG_REGEX=y
 151 +CONFIG_USB=y
 152 +CONFIG_USB_HOST=y
 153 +CONFIG_USB_XHCI_HCD=y
 154 +CONFIG_USB_XHCI_MTK=y
 155 +CONFIG_USB_STORAGE=y
 156 +CONFIG_OF_EMBED=y
 157 +CONFIG_ENV_OVERWRITE=y
 158 +CONFIG_ENV_IS_IN_MMC=y
 159 +CONFIG_ENV_OFFSET=0x400000
 160 +CONFIG_ENV_OFFSET_REDUND=0x440000
 161 +CONFIG_ENV_SIZE=0x40000
 162 +CONFIG_ENV_SIZE_REDUND=0x40000
 163 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 164 +CONFIG_NET_RANDOM_ETHADDR=y
 165 +CONFIG_REGMAP=y
 166 +CONFIG_SYSCON=y
 167 +CONFIG_CLK=y
 168 +CONFIG_SUPPORT_EMMC_BOOT=y
 169 +CONFIG_MMC_HS200_SUPPORT=y
 170 +CONFIG_MMC_MTK=y
 171 +CONFIG_PHY_FIXED=y
 172 +CONFIG_DM_ETH=y
 173 +CONFIG_MEDIATEK_ETH=y
 174 +CONFIG_PINCTRL=y
 175 +CONFIG_PINCONF=y
 176 +CONFIG_PINCTRL_MT7986=y
 177 +CONFIG_POWER_DOMAIN=y
 178 +CONFIG_MTK_POWER_DOMAIN=y
 179 +CONFIG_DM_REGULATOR=y
 180 +CONFIG_DM_REGULATOR_FIXED=y
 181 +CONFIG_DM_SERIAL=y
 182 +CONFIG_MTK_SERIAL=y
 183 +CONFIG_HEXDUMP=y
 184 +CONFIG_USE_DEFAULT_ENV_FILE=y
 185 +CONFIG_MTD_SPI_NAND=y
 186 +CONFIG_MTK_SPIM=y
 187 +#CONFIG_MTK_SNOR=y
 188 +CONFIG_DM_SPI_FLASH=y
 189 +CONFIG_SPI_FLASH_MTD=y
 190 +CONFIG_SPI_FLASH_WINBOND=y
 191 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 192 +CONFIG_CMD_SF=y
 193 +CONFIG_CMD_NAND=y
 194 +CONFIG_CMD_NAND_TRIMFFS=y
 195 +CONFIG_LMB_MAX_REGIONS=64
 196 +CONFIG_USE_IPADDR=y
 197 +CONFIG_IPADDR="192.168.1.1"
 198 +CONFIG_USE_SERVERIP=y
 199 +CONFIG_SERVERIP="192.168.1.254"
 200 --- /dev/null
 201 +++ b/configs/mt7986a_bpi-r3-nor_defconfig
 202 @@ -0,0 +1,195 @@
 203 +CONFIG_ARM=y
 204 +CONFIG_POSITION_INDEPENDENT=y
 205 +CONFIG_ARCH_MEDIATEK=y
 206 +CONFIG_TARGET_MT7986=y
 207 +CONFIG_TEXT_BASE=0x41e00000
 208 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 209 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 210 +CONFIG_NR_DRAM_BANKS=1
 211 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc"
 212 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_nor_env"
 213 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb"
 214 +CONFIG_OF_LIBFDT_OVERLAY=y
 215 +CONFIG_DEBUG_UART_BASE=0x11002000
 216 +CONFIG_DEBUG_UART_CLOCK=40000000
 217 +CONFIG_DEBUG_UART=y
 218 +CONFIG_SYS_LOAD_ADDR=0x46000000
 219 +CONFIG_SMBIOS_PRODUCT_NAME=""
 220 +CONFIG_AUTOBOOT_KEYED=y
 221 +CONFIG_BOOTDELAY=30
 222 +CONFIG_AUTOBOOT_MENU_SHOW=y
 223 +CONFIG_CFB_CONSOLE_ANSI=y
 224 +CONFIG_BOARD_LATE_INIT=y
 225 +CONFIG_BUTTON=y
 226 +CONFIG_BUTTON_GPIO=y
 227 +CONFIG_GPIO_HOG=y
 228 +CONFIG_CMD_ENV_FLAGS=y
 229 +CONFIG_FIT=y
 230 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 231 +CONFIG_LED=y
 232 +CONFIG_LED_BLINK=y
 233 +CONFIG_LED_GPIO=y
 234 +CONFIG_LOGLEVEL=7
 235 +CONFIG_LOG=y
 236 +CONFIG_SYS_PROMPT="MT7986> "
 237 +CONFIG_CMD_BOOTMENU=y
 238 +CONFIG_CMD_BOOTP=y
 239 +CONFIG_CMD_BUTTON=y
 240 +CONFIG_CMD_CACHE=y
 241 +CONFIG_CMD_CDP=y
 242 +CONFIG_CMD_CPU=y
 243 +CONFIG_CMD_DHCP=y
 244 +CONFIG_CMD_DM=y
 245 +CONFIG_CMD_DNS=y
 246 +CONFIG_CMD_ECHO=y
 247 +CONFIG_CMD_ENV_READMEM=y
 248 +CONFIG_CMD_ERASEENV=y
 249 +CONFIG_CMD_EXT4=y
 250 +CONFIG_CMD_FAT=y
 251 +CONFIG_CMD_FDT=y
 252 +CONFIG_CMD_FS_GENERIC=y
 253 +CONFIG_CMD_FS_UUID=y
 254 +CONFIG_CMD_GPIO=y
 255 +CONFIG_CMD_GPT=y
 256 +CONFIG_CMD_HASH=y
 257 +CONFIG_CMD_ITEST=y
 258 +CONFIG_CMD_LED=y
 259 +CONFIG_CMD_LICENSE=y
 260 +CONFIG_CMD_LINK_LOCAL=y
 261 +# CONFIG_CMD_MBR is not set
 262 +CONFIG_CMD_MMC=y
 263 +CONFIG_CMD_MTD=y
 264 +CONFIG_CMD_PCI=y
 265 +CONFIG_CMD_PSTORE=y
 266 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 267 +CONFIG_CMD_SF_TEST=y
 268 +CONFIG_CMD_PING=y
 269 +CONFIG_CMD_PXE=y
 270 +CONFIG_CMD_PWM=y
 271 +CONFIG_CMD_SMC=y
 272 +CONFIG_CMD_TFTPBOOT=y
 273 +CONFIG_CMD_TFTPSRV=y
 274 +CONFIG_CMD_UBI=y
 275 +CONFIG_CMD_UBI_RENAME=y
 276 +CONFIG_CMD_UBIFS=y
 277 +CONFIG_CMD_ASKENV=y
 278 +CONFIG_CMD_PART=y
 279 +CONFIG_CMD_RARP=y
 280 +CONFIG_CMD_SETEXPR=y
 281 +CONFIG_CMD_SLEEP=y
 282 +CONFIG_CMD_SNTP=y
 283 +CONFIG_CMD_SOURCE=y
 284 +CONFIG_CMD_STRINGS=y
 285 +CONFIG_CMD_USB=y
 286 +CONFIG_CMD_UUID=y
 287 +CONFIG_DISPLAY_CPUINFO=y
 288 +CONFIG_DM_MMC=y
 289 +CONFIG_DM_MTD=y
 290 +CONFIG_DM_REGULATOR=y
 291 +CONFIG_DM_REGULATOR_FIXED=y
 292 +CONFIG_DM_REGULATOR_GPIO=y
 293 +CONFIG_DM_USB=y
 294 +CONFIG_DM_PWM=y
 295 +CONFIG_PWM_MTK=y
 296 +CONFIG_HUSH_PARSER=y
 297 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 298 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 299 +CONFIG_VERSION_VARIABLE=y
 300 +CONFIG_PARTITION_UUIDS=y
 301 +CONFIG_NETCONSOLE=y
 302 +CONFIG_REGMAP=y
 303 +CONFIG_SYSCON=y
 304 +CONFIG_CLK=y
 305 +CONFIG_DM_GPIO=y
 306 +CONFIG_DM_SCSI=y
 307 +CONFIG_AHCI=y
 308 +CONFIG_AHCI_PCI=y
 309 +CONFIG_SCSI_AHCI=y
 310 +CONFIG_SCSI=y
 311 +CONFIG_CMD_SCSI=y
 312 +CONFIG_PHY=y
 313 +CONFIG_PHY_MTK_TPHY=y
 314 +CONFIG_PHY_FIXED=y
 315 +CONFIG_MTK_AHCI=y
 316 +CONFIG_DM_ETH=y
 317 +CONFIG_MEDIATEK_ETH=y
 318 +CONFIG_PCI=y
 319 +CONFIG_MTD=y
 320 +CONFIG_MTD_UBI_FASTMAP=y
 321 +CONFIG_DM_PCI=y
 322 +CONFIG_PCIE_MEDIATEK=y
 323 +CONFIG_PINCTRL=y
 324 +CONFIG_PINCONF=y
 325 +CONFIG_PINCTRL_MT7622=y
 326 +CONFIG_POWER_DOMAIN=y
 327 +CONFIG_PRE_CONSOLE_BUFFER=y
 328 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 329 +CONFIG_MTK_POWER_DOMAIN=y
 330 +CONFIG_RAM=y
 331 +CONFIG_DM_SERIAL=y
 332 +CONFIG_MTK_SERIAL=y
 333 +CONFIG_MMC=y
 334 +CONFIG_MMC_DEFAULT_DEV=1
 335 +CONFIG_MMC_HS200_SUPPORT=y
 336 +CONFIG_MMC_MTK=y
 337 +CONFIG_MMC_SUPPORTS_TUNING=y
 338 +CONFIG_SUPPORT_EMMC_BOOT=y
 339 +CONFIG_SPI=y
 340 +CONFIG_DM_SPI=y
 341 +CONFIG_MTK_SPI_NAND=y
 342 +CONFIG_MTK_SPI_NAND_MTD=y
 343 +CONFIG_SYSRESET_WATCHDOG=y
 344 +CONFIG_WDT_MTK=y
 345 +CONFIG_LZO=y
 346 +CONFIG_ZSTD=y
 347 +CONFIG_HEXDUMP=y
 348 +CONFIG_RANDOM_UUID=y
 349 +CONFIG_REGEX=y
 350 +CONFIG_USB=y
 351 +CONFIG_USB_HOST=y
 352 +CONFIG_USB_XHCI_HCD=y
 353 +CONFIG_USB_XHCI_MTK=y
 354 +CONFIG_USB_STORAGE=y
 355 +CONFIG_OF_EMBED=y
 356 +CONFIG_ENV_OVERWRITE=y
 357 +CONFIG_ENV_IS_IN_MTD=y
 358 +CONFIG_ENV_MTD_NAME="u-boot-env"
 359 +CONFIG_ENV_OFFSET=0x0
 360 +CONFIG_ENV_OFFSET_REDUND=0x20000
 361 +CONFIG_ENV_SIZE=0x20000
 362 +CONFIG_ENV_SIZE_REDUND=0x20000
 363 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 364 +CONFIG_NET_RANDOM_ETHADDR=y
 365 +CONFIG_REGMAP=y
 366 +CONFIG_SYSCON=y
 367 +CONFIG_CLK=y
 368 +CONFIG_SUPPORT_EMMC_BOOT=y
 369 +CONFIG_MMC_HS200_SUPPORT=y
 370 +CONFIG_MMC_MTK=y
 371 +CONFIG_PHY_FIXED=y
 372 +CONFIG_DM_ETH=y
 373 +CONFIG_MEDIATEK_ETH=y
 374 +CONFIG_PINCTRL=y
 375 +CONFIG_PINCONF=y
 376 +CONFIG_PINCTRL_MT7986=y
 377 +CONFIG_POWER_DOMAIN=y
 378 +CONFIG_MTK_POWER_DOMAIN=y
 379 +CONFIG_DM_REGULATOR=y
 380 +CONFIG_DM_REGULATOR_FIXED=y
 381 +CONFIG_DM_SERIAL=y
 382 +CONFIG_MTK_SERIAL=y
 383 +CONFIG_HEXDUMP=y
 384 +CONFIG_USE_DEFAULT_ENV_FILE=y
 385 +#CONFIG_MTD_SPI_NAND=y
 386 +CONFIG_MTK_SPIM=y
 387 +#CONFIG_MTK_SNOR=y
 388 +CONFIG_DM_SPI_FLASH=y
 389 +CONFIG_SPI_FLASH_MTD=y
 390 +CONFIG_SPI_FLASH_WINBOND=y
 391 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 392 +CONFIG_CMD_SF=y
 393 +CONFIG_LMB_MAX_REGIONS=64
 394 +CONFIG_USE_IPADDR=y
 395 +CONFIG_IPADDR="192.168.1.1"
 396 +CONFIG_USE_SERVERIP=y
 397 +CONFIG_SERVERIP="192.168.1.254"
 398 --- /dev/null
 399 +++ b/configs/mt7986a_bpi-r3-sd_defconfig
 400 @@ -0,0 +1,196 @@
 401 +CONFIG_ARM=y
 402 +CONFIG_POSITION_INDEPENDENT=y
 403 +CONFIG_ARCH_MEDIATEK=y
 404 +CONFIG_TARGET_MT7986=y
 405 +CONFIG_TEXT_BASE=0x41e00000
 406 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 407 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 408 +CONFIG_NR_DRAM_BANKS=1
 409 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-sd"
 410 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_sdmmc_env"
 411 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-sd.dtb"
 412 +CONFIG_OF_LIBFDT_OVERLAY=y
 413 +CONFIG_DEBUG_UART_BASE=0x11002000
 414 +CONFIG_DEBUG_UART_CLOCK=40000000
 415 +CONFIG_DEBUG_UART=y
 416 +CONFIG_SYS_LOAD_ADDR=0x46000000
 417 +CONFIG_SMBIOS_PRODUCT_NAME=""
 418 +CONFIG_AUTOBOOT_KEYED=y
 419 +CONFIG_BOOTDELAY=30
 420 +CONFIG_AUTOBOOT_MENU_SHOW=y
 421 +CONFIG_CFB_CONSOLE_ANSI=y
 422 +CONFIG_BOARD_LATE_INIT=y
 423 +CONFIG_BUTTON=y
 424 +CONFIG_BUTTON_GPIO=y
 425 +CONFIG_GPIO_HOG=y
 426 +CONFIG_CMD_ENV_FLAGS=y
 427 +CONFIG_FIT=y
 428 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 429 +CONFIG_LED=y
 430 +CONFIG_LED_BLINK=y
 431 +CONFIG_LED_GPIO=y
 432 +CONFIG_LOGLEVEL=7
 433 +CONFIG_LOG=y
 434 +CONFIG_SYS_PROMPT="MT7986> "
 435 +CONFIG_CMD_BOOTMENU=y
 436 +CONFIG_CMD_BOOTP=y
 437 +CONFIG_CMD_BUTTON=y
 438 +CONFIG_CMD_CACHE=y
 439 +CONFIG_CMD_CDP=y
 440 +CONFIG_CMD_CPU=y
 441 +CONFIG_CMD_DHCP=y
 442 +CONFIG_CMD_DM=y
 443 +CONFIG_CMD_DNS=y
 444 +CONFIG_CMD_ECHO=y
 445 +CONFIG_CMD_ENV_READMEM=y
 446 +CONFIG_CMD_ERASEENV=y
 447 +CONFIG_CMD_EXT4=y
 448 +CONFIG_CMD_FAT=y
 449 +CONFIG_CMD_FDT=y
 450 +CONFIG_CMD_FS_GENERIC=y
 451 +CONFIG_CMD_FS_UUID=y
 452 +CONFIG_CMD_GPIO=y
 453 +CONFIG_CMD_GPT=y
 454 +CONFIG_CMD_HASH=y
 455 +CONFIG_CMD_ITEST=y
 456 +CONFIG_CMD_LED=y
 457 +CONFIG_CMD_LICENSE=y
 458 +CONFIG_CMD_LINK_LOCAL=y
 459 +# CONFIG_CMD_MBR is not set
 460 +CONFIG_CMD_MMC=y
 461 +CONFIG_CMD_MTD=y
 462 +CONFIG_CMD_PCI=y
 463 +CONFIG_CMD_PSTORE=y
 464 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 465 +CONFIG_CMD_SF_TEST=y
 466 +CONFIG_CMD_PING=y
 467 +CONFIG_CMD_PXE=y
 468 +CONFIG_CMD_PWM=y
 469 +CONFIG_CMD_SMC=y
 470 +CONFIG_CMD_TFTPBOOT=y
 471 +CONFIG_CMD_TFTPSRV=y
 472 +CONFIG_CMD_UBI=y
 473 +CONFIG_CMD_UBI_RENAME=y
 474 +CONFIG_CMD_UBIFS=y
 475 +CONFIG_CMD_ASKENV=y
 476 +CONFIG_CMD_PART=y
 477 +CONFIG_CMD_RARP=y
 478 +CONFIG_CMD_SETEXPR=y
 479 +CONFIG_CMD_SLEEP=y
 480 +CONFIG_CMD_SNTP=y
 481 +CONFIG_CMD_SOURCE=y
 482 +CONFIG_CMD_STRINGS=y
 483 +CONFIG_CMD_USB=y
 484 +CONFIG_CMD_UUID=y
 485 +CONFIG_DISPLAY_CPUINFO=y
 486 +CONFIG_DM_MMC=y
 487 +CONFIG_DM_MTD=y
 488 +CONFIG_DM_REGULATOR=y
 489 +CONFIG_DM_REGULATOR_FIXED=y
 490 +CONFIG_DM_REGULATOR_GPIO=y
 491 +CONFIG_DM_USB=y
 492 +CONFIG_DM_PWM=y
 493 +CONFIG_PWM_MTK=y
 494 +CONFIG_HUSH_PARSER=y
 495 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 496 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 497 +CONFIG_VERSION_VARIABLE=y
 498 +CONFIG_PARTITION_UUIDS=y
 499 +CONFIG_NETCONSOLE=y
 500 +CONFIG_REGMAP=y
 501 +CONFIG_SYSCON=y
 502 +CONFIG_CLK=y
 503 +CONFIG_DM_GPIO=y
 504 +CONFIG_DM_SCSI=y
 505 +CONFIG_AHCI=y
 506 +CONFIG_AHCI_PCI=y
 507 +CONFIG_SCSI_AHCI=y
 508 +CONFIG_SCSI=y
 509 +CONFIG_CMD_SCSI=y
 510 +CONFIG_PHY=y
 511 +CONFIG_PHY_MTK_TPHY=y
 512 +CONFIG_PHY_FIXED=y
 513 +CONFIG_MTK_AHCI=y
 514 +CONFIG_DM_ETH=y
 515 +CONFIG_MEDIATEK_ETH=y
 516 +CONFIG_PCI=y
 517 +CONFIG_MTD=y
 518 +CONFIG_MTD_UBI_FASTMAP=y
 519 +CONFIG_DM_PCI=y
 520 +CONFIG_PCIE_MEDIATEK=y
 521 +CONFIG_PINCTRL=y
 522 +CONFIG_PINCONF=y
 523 +CONFIG_PINCTRL_MT7622=y
 524 +CONFIG_POWER_DOMAIN=y
 525 +CONFIG_PRE_CONSOLE_BUFFER=y
 526 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 527 +CONFIG_MTK_POWER_DOMAIN=y
 528 +CONFIG_RAM=y
 529 +CONFIG_DM_SERIAL=y
 530 +CONFIG_MTK_SERIAL=y
 531 +CONFIG_MMC=y
 532 +CONFIG_MMC_DEFAULT_DEV=1
 533 +CONFIG_MMC_HS200_SUPPORT=y
 534 +CONFIG_MMC_MTK=y
 535 +CONFIG_MMC_SUPPORTS_TUNING=y
 536 +CONFIG_SUPPORT_EMMC_BOOT=y
 537 +CONFIG_SPI=y
 538 +CONFIG_DM_SPI=y
 539 +CONFIG_MTK_SPI_NAND=y
 540 +CONFIG_MTK_SPI_NAND_MTD=y
 541 +CONFIG_SYSRESET_WATCHDOG=y
 542 +CONFIG_WDT_MTK=y
 543 +CONFIG_LZO=y
 544 +CONFIG_ZSTD=y
 545 +CONFIG_HEXDUMP=y
 546 +CONFIG_RANDOM_UUID=y
 547 +CONFIG_REGEX=y
 548 +CONFIG_USB=y
 549 +CONFIG_USB_HOST=y
 550 +CONFIG_USB_XHCI_HCD=y
 551 +CONFIG_USB_XHCI_MTK=y
 552 +CONFIG_USB_STORAGE=y
 553 +CONFIG_OF_EMBED=y
 554 +CONFIG_ENV_OVERWRITE=y
 555 +CONFIG_ENV_IS_IN_MMC=y
 556 +CONFIG_ENV_OFFSET=0x400000
 557 +CONFIG_ENV_OFFSET_REDUND=0x440000
 558 +CONFIG_ENV_SIZE=0x40000
 559 +CONFIG_ENV_SIZE_REDUND=0x40000
 560 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 561 +CONFIG_NET_RANDOM_ETHADDR=y
 562 +CONFIG_REGMAP=y
 563 +CONFIG_SYSCON=y
 564 +CONFIG_CLK=y
 565 +CONFIG_SUPPORT_EMMC_BOOT=y
 566 +CONFIG_MMC_HS200_SUPPORT=y
 567 +CONFIG_MMC_MTK=y
 568 +CONFIG_PHY_FIXED=y
 569 +CONFIG_DM_ETH=y
 570 +CONFIG_MEDIATEK_ETH=y
 571 +CONFIG_PINCTRL=y
 572 +CONFIG_PINCONF=y
 573 +CONFIG_PINCTRL_MT7986=y
 574 +CONFIG_POWER_DOMAIN=y
 575 +CONFIG_MTK_POWER_DOMAIN=y
 576 +CONFIG_DM_REGULATOR=y
 577 +CONFIG_DM_REGULATOR_FIXED=y
 578 +CONFIG_DM_SERIAL=y
 579 +CONFIG_MTK_SERIAL=y
 580 +CONFIG_HEXDUMP=y
 581 +CONFIG_USE_DEFAULT_ENV_FILE=y
 582 +CONFIG_MTD_SPI_NAND=y
 583 +CONFIG_MTK_SPIM=y
 584 +#CONFIG_MTK_SNOR=y
 585 +CONFIG_DM_SPI_FLASH=y
 586 +CONFIG_SPI_FLASH_MTD=y
 587 +CONFIG_SPI_FLASH_WINBOND=y
 588 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 589 +CONFIG_CMD_SF=y
 590 +CONFIG_CMD_NAND=y
 591 +CONFIG_CMD_NAND_TRIMFFS=y
 592 +CONFIG_LMB_MAX_REGIONS=64
 593 +CONFIG_USE_IPADDR=y
 594 +CONFIG_IPADDR="192.168.1.1"
 595 +CONFIG_USE_SERVERIP=y
 596 +CONFIG_SERVERIP="192.168.1.254"
 597 --- /dev/null
 598 +++ b/configs/mt7986a_bpi-r3-snand_defconfig
 599 @@ -0,0 +1,197 @@
 600 +CONFIG_ARM=y
 601 +CONFIG_POSITION_INDEPENDENT=y
 602 +CONFIG_ARCH_MEDIATEK=y
 603 +CONFIG_TARGET_MT7986=y
 604 +CONFIG_TEXT_BASE=0x41e00000
 605 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 606 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 607 +CONFIG_NR_DRAM_BANKS=1
 608 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc"
 609 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_snand_env"
 610 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb"
 611 +CONFIG_OF_LIBFDT_OVERLAY=y
 612 +CONFIG_DEBUG_UART_BASE=0x11002000
 613 +CONFIG_DEBUG_UART_CLOCK=40000000
 614 +CONFIG_DEBUG_UART=y
 615 +CONFIG_SYS_LOAD_ADDR=0x46000000
 616 +CONFIG_SMBIOS_PRODUCT_NAME=""
 617 +CONFIG_AUTOBOOT_KEYED=y
 618 +CONFIG_BOOTDELAY=30
 619 +CONFIG_AUTOBOOT_MENU_SHOW=y
 620 +CONFIG_CFB_CONSOLE_ANSI=y
 621 +CONFIG_BOARD_LATE_INIT=y
 622 +CONFIG_BUTTON=y
 623 +CONFIG_BUTTON_GPIO=y
 624 +CONFIG_GPIO_HOG=y
 625 +CONFIG_CMD_ENV_FLAGS=y
 626 +CONFIG_FIT=y
 627 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 628 +CONFIG_LED=y
 629 +CONFIG_LED_BLINK=y
 630 +CONFIG_LED_GPIO=y
 631 +CONFIG_LOGLEVEL=7
 632 +CONFIG_LOG=y
 633 +CONFIG_SYS_PROMPT="MT7986> "
 634 +CONFIG_CMD_BOOTMENU=y
 635 +CONFIG_CMD_BOOTP=y
 636 +CONFIG_CMD_BUTTON=y
 637 +CONFIG_CMD_CACHE=y
 638 +CONFIG_CMD_CDP=y
 639 +CONFIG_CMD_CPU=y
 640 +CONFIG_CMD_DHCP=y
 641 +CONFIG_CMD_DM=y
 642 +CONFIG_CMD_DNS=y
 643 +CONFIG_CMD_ECHO=y
 644 +CONFIG_CMD_ENV_READMEM=y
 645 +CONFIG_CMD_ERASEENV=y
 646 +CONFIG_CMD_EXT4=y
 647 +CONFIG_CMD_FAT=y
 648 +CONFIG_CMD_FDT=y
 649 +CONFIG_CMD_FS_GENERIC=y
 650 +CONFIG_CMD_FS_UUID=y
 651 +CONFIG_CMD_GPIO=y
 652 +CONFIG_CMD_GPT=y
 653 +CONFIG_CMD_HASH=y
 654 +CONFIG_CMD_ITEST=y
 655 +CONFIG_CMD_LED=y
 656 +CONFIG_CMD_LICENSE=y
 657 +CONFIG_CMD_LINK_LOCAL=y
 658 +# CONFIG_CMD_MBR is not set
 659 +CONFIG_CMD_MMC=y
 660 +CONFIG_CMD_MTD=y
 661 +CONFIG_CMD_PCI=y
 662 +CONFIG_CMD_PSTORE=y
 663 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 664 +CONFIG_CMD_SF_TEST=y
 665 +CONFIG_CMD_PING=y
 666 +CONFIG_CMD_PXE=y
 667 +CONFIG_CMD_PWM=y
 668 +CONFIG_CMD_SMC=y
 669 +CONFIG_CMD_TFTPBOOT=y
 670 +CONFIG_CMD_TFTPSRV=y
 671 +CONFIG_CMD_UBI=y
 672 +CONFIG_CMD_UBI_RENAME=y
 673 +CONFIG_CMD_UBIFS=y
 674 +CONFIG_CMD_ASKENV=y
 675 +CONFIG_CMD_PART=y
 676 +CONFIG_CMD_RARP=y
 677 +CONFIG_CMD_SETEXPR=y
 678 +CONFIG_CMD_SLEEP=y
 679 +CONFIG_CMD_SNTP=y
 680 +CONFIG_CMD_SOURCE=y
 681 +CONFIG_CMD_STRINGS=y
 682 +CONFIG_CMD_USB=y
 683 +CONFIG_CMD_UUID=y
 684 +CONFIG_DISPLAY_CPUINFO=y
 685 +CONFIG_DM_MMC=y
 686 +CONFIG_DM_MTD=y
 687 +CONFIG_DM_REGULATOR=y
 688 +CONFIG_DM_REGULATOR_FIXED=y
 689 +CONFIG_DM_REGULATOR_GPIO=y
 690 +CONFIG_DM_USB=y
 691 +CONFIG_DM_PWM=y
 692 +CONFIG_PWM_MTK=y
 693 +CONFIG_HUSH_PARSER=y
 694 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 695 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 696 +CONFIG_VERSION_VARIABLE=y
 697 +CONFIG_PARTITION_UUIDS=y
 698 +CONFIG_NETCONSOLE=y
 699 +CONFIG_REGMAP=y
 700 +CONFIG_SYSCON=y
 701 +CONFIG_CLK=y
 702 +CONFIG_DM_GPIO=y
 703 +CONFIG_DM_SCSI=y
 704 +CONFIG_AHCI=y
 705 +CONFIG_AHCI_PCI=y
 706 +CONFIG_SCSI_AHCI=y
 707 +CONFIG_SCSI=y
 708 +CONFIG_CMD_SCSI=y
 709 +CONFIG_PHY=y
 710 +CONFIG_PHY_MTK_TPHY=y
 711 +CONFIG_PHY_FIXED=y
 712 +CONFIG_MTK_AHCI=y
 713 +CONFIG_DM_ETH=y
 714 +CONFIG_MEDIATEK_ETH=y
 715 +CONFIG_PCI=y
 716 +CONFIG_MTD=y
 717 +CONFIG_MTD_UBI_FASTMAP=y
 718 +CONFIG_DM_PCI=y
 719 +CONFIG_PCIE_MEDIATEK=y
 720 +CONFIG_PINCTRL=y
 721 +CONFIG_PINCONF=y
 722 +CONFIG_PINCTRL_MT7622=y
 723 +CONFIG_POWER_DOMAIN=y
 724 +CONFIG_PRE_CONSOLE_BUFFER=y
 725 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 726 +CONFIG_MTK_POWER_DOMAIN=y
 727 +CONFIG_RAM=y
 728 +CONFIG_DM_SERIAL=y
 729 +CONFIG_MTK_SERIAL=y
 730 +CONFIG_MMC=y
 731 +CONFIG_MMC_DEFAULT_DEV=1
 732 +CONFIG_MMC_HS200_SUPPORT=y
 733 +CONFIG_MMC_MTK=y
 734 +CONFIG_MMC_SUPPORTS_TUNING=y
 735 +CONFIG_SUPPORT_EMMC_BOOT=y
 736 +CONFIG_SPI=y
 737 +CONFIG_DM_SPI=y
 738 +CONFIG_MTK_SPI_NAND=y
 739 +CONFIG_MTK_SPI_NAND_MTD=y
 740 +CONFIG_SYSRESET_WATCHDOG=y
 741 +CONFIG_WDT_MTK=y
 742 +CONFIG_LZO=y
 743 +CONFIG_ZSTD=y
 744 +CONFIG_HEXDUMP=y
 745 +CONFIG_RANDOM_UUID=y
 746 +CONFIG_REGEX=y
 747 +CONFIG_USB=y
 748 +CONFIG_USB_HOST=y
 749 +CONFIG_USB_XHCI_HCD=y
 750 +CONFIG_USB_XHCI_MTK=y
 751 +CONFIG_USB_STORAGE=y
 752 +CONFIG_OF_EMBED=y
 753 +CONFIG_ENV_OVERWRITE=y
 754 +CONFIG_ENV_IS_IN_UBI=y
 755 +CONFIG_ENV_UBI_PART="ubi"
 756 +CONFIG_ENV_SIZE=0x1f000
 757 +CONFIG_ENV_SIZE_REDUND=0x1f000
 758 +CONFIG_ENV_UBI_VOLUME="ubootenv"
 759 +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 760 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 761 +CONFIG_NET_RANDOM_ETHADDR=y
 762 +CONFIG_REGMAP=y
 763 +CONFIG_SYSCON=y
 764 +CONFIG_CLK=y
 765 +CONFIG_SUPPORT_EMMC_BOOT=y
 766 +CONFIG_MMC_HS200_SUPPORT=y
 767 +CONFIG_MMC_MTK=y
 768 +CONFIG_PHY_FIXED=y
 769 +CONFIG_DM_ETH=y
 770 +CONFIG_MEDIATEK_ETH=y
 771 +CONFIG_PINCTRL=y
 772 +CONFIG_PINCONF=y
 773 +CONFIG_PINCTRL_MT7986=y
 774 +CONFIG_POWER_DOMAIN=y
 775 +CONFIG_MTK_POWER_DOMAIN=y
 776 +CONFIG_DM_REGULATOR=y
 777 +CONFIG_DM_REGULATOR_FIXED=y
 778 +CONFIG_DM_SERIAL=y
 779 +CONFIG_MTK_SERIAL=y
 780 +CONFIG_HEXDUMP=y
 781 +CONFIG_USE_DEFAULT_ENV_FILE=y
 782 +CONFIG_MTD_SPI_NAND=y
 783 +CONFIG_MTK_SPIM=y
 784 +#CONFIG_MTK_SNOR=y
 785 +#CONFIG_DM_SPI_FLASH=y
 786 +#CONFIG_SPI_FLASH_MTD=y
 787 +#CONFIG_SPI_FLASH_WINBOND=y
 788 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 789 +#CONFIG_CMD_SF=y
 790 +CONFIG_CMD_NAND=y
 791 +CONFIG_CMD_NAND_TRIMFFS=y
 792 +CONFIG_LMB_MAX_REGIONS=64
 793 +CONFIG_USE_IPADDR=y
 794 +CONFIG_IPADDR="192.168.1.1"
 795 +CONFIG_USE_SERVERIP=y
 796 +CONFIG_SERVERIP="192.168.1.254"
 797 --- /dev/null
 798 +++ b/bananapi_bpi-r3_sdmmc_env
 799 @@ -0,0 +1,80 @@
 800 +ipaddr=192.168.1.1
 801 +serverip=192.168.1.254
 802 +loadaddr=0x46000000
 803 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 804 +bootargs=root=/dev/mmcblk0p65
 805 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
 806 +bootconf=config-mt7986a-bananapi-bpi-r3
 807 +bootconf_base=config-mt7986a-bananapi-bpi-r3
 808 +bootconf_nor=mt7986a-bananapi-bpi-r3-nor
 809 +bootconf_nand=mt7986a-bananapi-bpi-r3-nand
 810 +bootconf_sd=mt7986a-bananapi-bpi-r3-sd
 811 +bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 812 +bootdelay=0
 813 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 814 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
 815 +bootled_pwr=green:status
 816 +bootled_rec=blue:status
 817 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 818 +bootmenu_default=0
 819 +bootmenu_delay=0
 820 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SD card]\e[0m
 821 +bootmenu_0=Initialize environment.=run _firstboot
 822 +bootmenu_0d=Run default boot command.=run boot_default
 823 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 824 +bootmenu_2=Boot production system from SD card.=run boot_production ; run bootmenu_confirm_return
 825 +bootmenu_3=Boot recovery system from SD card.=run boot_recovery ; run bootmenu_confirm_return
 826 +bootmenu_4=Load production system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 827 +bootmenu_5=Load recovery system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 828 +bootmenu_6=\e[31mInstall bootloader, recovery and production to NOR.\e[0m=if sf probe ; then run nor_init ; else echo "NOR not detected" ; fi ; run bootmenu_confirm_return
 829 +bootmenu_7=\e[31mInstall bootloader, recovery and production to NAND.\e[0m=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return
 830 +bootmenu_8=Reboot.=reset
 831 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 832 +boot_update_conf=if nand info ; then setenv bootconf $bootconf_base#$bootconf_sd#$bootconf_nand ; else if sf probe ; then setenv bootconf $bootconf_base#$bootconf_sd#$bootconf_nor ; else setenv bootconf $bootconf_base#$bootconf_sd ; fi ; fi
 833 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 834 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 835 +boot_production=led $bootled_pwr on ; run boot_update_conf ; run sdmmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 836 +boot_recovery=led $bootled_rec on ; run boot_update_conf ; run sdmmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 837 +boot_sdmmc=run boot_production ; run boot_recovery
 838 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 839 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run sdmmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 840 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run sdmmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 841 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 842 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
 843 +mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
 844 +part_default=production
 845 +part_recovery=recovery
 846 +reset_factory=eraseenv && reset
 847 +sdmmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
 848 +sdmmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
 849 +sdmmc_read_snand_bl2=part start mmc 0 install part_addr && mmc read $loadaddr $part_addr 0x400
 850 +sdmmc_read_snand_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x800 && mmc read $loadaddr $offset 0x1000
 851 +sdmmc_read_nor_bl2=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x2800 && mmc read $loadaddr $offset 0x400
 852 +sdmmc_read_nor_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3000 && mmc read $loadaddr $offset 0x1000
 853 +sdmmc_read_emmc_install=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3800 && mmc read $loadaddr $offset 0x4000
 854 +sdmmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
 855 +sdmmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
 856 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 857 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 858 +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000
 859 +nor_erase_env=mtd erase u-boot-env
 860 +nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb
 861 +nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb
 862 +nor_init=run nor_init_bl && run nor_init_openwrt
 863 +nor_init_bl=run sdmmc_read_nor_bl2 && run mtd_write_bl2 && run sdmmc_read_nor_fip && run mtd_write_fip && run nor_erase_env
 864 +nor_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run nor_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run nor_write_production
 865 +ubi_create_env=ubi create ubootenv 0x100000 dynamic 0 ; ubi create ubootenv2 0x100000 dynamic 1
 866 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi
 867 +ubi_init=run ubi_init_bl && run ubi_format && run ubi_create_env && run ubi_init_openwrt && run ubi_init_emmc_install
 868 +ubi_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run ubi_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run ubi_write_production
 869 +ubi_init_bl=run sdmmc_read_snand_bl2 && run mtd_write_bl2 && run sdmmc_read_snand_fip && run mtd_write_fip
 870 +ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install
 871 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 872 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 873 +ubi_write_emmc_install=ubi check emmc_install && ubi remove emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000
 874 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
 875 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
 876 +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
 877 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 878 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 879 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 880 --- /dev/null
 881 +++ b/bananapi_bpi-r3_nor_env
 882 @@ -0,0 +1,60 @@
 883 +ipaddr=192.168.1.1
 884 +serverip=192.168.1.254
 885 +loadaddr=0x46000000
 886 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 887 +bootargs=root=/dev/mtdblock0p1
 888 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi
 889 +bootconf=config-mt7986a-bananapi-bpi-r3
 890 +bootconf_base=config-mt7986a-bananapi-bpi-r3
 891 +bootconf_nor=mt7986a-bananapi-bpi-r3-nor
 892 +bootconf_nand=mt7986a-bananapi-bpi-r3-nand
 893 +bootconf_sd=mt7986a-bananapi-bpi-r3-sd
 894 +bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 895 +bootdelay=0
 896 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 897 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-preloader.bin
 898 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-bl31-uboot.fip
 899 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
 900 +bootled_pwr=green:status
 901 +bootled_rec=blue:status
 902 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 903 +bootmenu_default=0
 904 +bootmenu_delay=0
 905 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SPI-NOR]\e[0m
 906 +bootmenu_0=Initialize environment.=run _firstboot
 907 +bootmenu_0d=Run default boot command.=run boot_default
 908 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 909 +bootmenu_2=Boot production system from flash.=run boot_production ; run bootmenu_confirm_return
 910 +bootmenu_3=Boot recovery system from flash.=run boot_recovery ; run bootmenu_confirm_return
 911 +bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 912 +bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 913 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to flash.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
 914 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to flash.\e[0m=run boot_tftp_write_preloader ; run bootmenu_confirm_return
 915 +bootmenu_8=Reboot.=reset
 916 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 917 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 918 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 919 +boot_production=run boot_update_conf ; led $bootled_pwr on ; run nor_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 920 +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run nor_read_recovery ; bootm $loadaddr#$bootconf ; led $bootled_rec off
 921 +boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip
 922 +boot_serial_write_preloader=loadx $loadaddr 115200 && run boot_write_preloader
 923 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 924 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 925 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 926 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 927 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip
 928 +boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader
 929 +boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_emmc ; else setenv bootconf $bootconf_base#$bootconf_nor#$bootconf_sd ; fi
 930 +boot_nor=run boot_production ; run boot_recovery
 931 +boot_write_fip=mtd erase fip && mtd write fip $loadaddr
 932 +boot_write_preloader=mtd erase bl2 && mtd write bl2 $loadaddr
 933 +reset_factory=mtd erase u-boot-env
 934 +nor_read_production=mtd read fit $loadaddr 0x0 0x20000 && imsz $loadaddr image_size && mtd read fit $loadaddr 0x0 $image_size
 935 +nor_read_recovery=mtd read recovery $loadaddr 0x0 0x20000 && imsz $loadaddr image_size && mtd read recovery $loadaddr 0x0 $image_size
 936 +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000
 937 +nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb
 938 +nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb
 939 +_init_env=setenv _init_env ; saveenv
 940 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 941 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 942 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 943 --- /dev/null
 944 +++ b/bananapi_bpi-r3_snand_env
 945 @@ -0,0 +1,74 @@
 946 +ipaddr=192.168.1.1
 947 +serverip=192.168.1.254
 948 +loadaddr=0x46000000
 949 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
 950 +bootargs=root=/dev/ubiblock0_2p1
 951 +bootconf=config-mt7986a-bananapi-bpi-r3
 952 +bootconf_base=config-mt7986a-bananapi-bpi-r3
 953 +bootconf_nor=mt7986a-bananapi-bpi-r3-nor
 954 +bootconf_nand=mt7986a-bananapi-bpi-r3-nand
 955 +bootconf_sd=mt7986a-bananapi-bpi-r3-sd
 956 +bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
 957 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 958 +bootdelay=0
 959 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
 960 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-preloader.bin
 961 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-bl31-uboot.fip
 962 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
 963 +bootled_pwr=green:status
 964 +bootled_rec=blue:status
 965 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 966 +bootmenu_default=0
 967 +bootmenu_delay=0
 968 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SPI-NAND]\e[0m
 969 +bootmenu_0=Initialize environment.=run _firstboot
 970 +bootmenu_0d=Run default boot command.=run boot_default
 971 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 972 +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 973 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 974 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 975 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 976 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
 977 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to NAND.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 978 +bootmenu_8=\e[31mInstall bootloader, recovery and production to eMMC.\e[0m=if mmc partconf 0 ; then run emmc_init ; else echo "eMMC not detected" ; fi ; run bootmenu_confirm_return
 979 +bootmenu_9=Reboot.=reset
 980 +bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset
 981 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 982 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 983 +boot_production=run boot_update_conf ; led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
 984 +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 985 +boot_ubi=run boot_update_conf ; run boot_production ; run boot_recovery
 986 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 987 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 988 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 989 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 990 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory
 991 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2
 992 +boot_update_conf=if mmc partconf 0 ; then setenv bootconf $bootconf_base#$bootconf_nand#$bootconf_emmc ; else setenv bootconf  $bootconf_base#$bootconf_nand#$bootconf_sd ; fi
 993 +part_default=production
 994 +part_recovery=recovery
 995 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 996 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr
 997 +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr
 998 +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1
 999 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset
1000 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
1001 +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
1002 +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
1003 +ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install
1004 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
1005 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize
1006 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize
1007 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
1008 +emmc_init=mmc dev 0 && mmc bootbus 0 0 0 0 && run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv
1009 +emmc_init_bl=run ubi_read_emmc_install && setenv fileaddr $loadaddr && run emmc_write_bl2 && setexpr fileaddr $loadaddr + 0x100000 && run emmc_write_fip && setexpr fileaddr $loadaddr + 0x500000 && run emmc_write_hdr
1010 +emmc_init_openwrt=run ubi_read_recovery && iminfo $loadaddr && run emmc_write_recovery ; run ubi_read_production && iminfo $loadaddr && run emmc_write_production
1011 +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
1012 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
1013 +emmc_write_hdr=mmc erase 0x0 0x40 && mmc write $fileaddr 0x0 0x40
1014 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
1015 +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
1016 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
1017 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
1018 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
1019 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
1020 --- /dev/null
1021 +++ b/bananapi_bpi-r3_emmc_env
1022 @@ -0,0 +1,61 @@
1023 +ipaddr=192.168.1.1
1024 +serverip=192.168.1.254
1025 +loadaddr=0x46000000
1026 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
1027 +bootargs=root=/dev/mmcblk0p65
1028 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
1029 +bootconf=config-mt7986a-bananapi-bpi-r3
1030 +bootconf_base=config-mt7986a-bananapi-bpi-r3
1031 +bootconf_nor=mt7986a-bananapi-bpi-r3-nor
1032 +bootconf_nand=mt7986a-bananapi-bpi-r3-nand
1033 +bootconf_sd=mt7986a-bananapi-bpi-r3-sd
1034 +bootconf_emmc=mt7986a-bananapi-bpi-r3-emmc
1035 +bootdelay=0
1036 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb
1037 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-preloader.bin
1038 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-bl31-uboot.fip
1039 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb
1040 +bootled_pwr=green:status
1041 +bootled_rec=blue:status
1042 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
1043 +bootmenu_default=0
1044 +bootmenu_delay=0
1045 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[eMMC]\e[0m
1046 +bootmenu_0=Initialize environment.=run _firstboot
1047 +bootmenu_0d=Run default boot command.=run boot_default
1048 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
1049 +bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
1050 +bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
1051 +bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1052 +bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
1053 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to eMMC.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
1054 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to eMMC.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
1055 +bootmenu_8=Reboot.=reset
1056 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
1057 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
1058 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
1059 +boot_production=run boot_update_conf ; led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off
1060 +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
1061 +boot_emmc=run boot_update_conf ; run boot_production ; run boot_recovery
1062 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
1063 +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1064 +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
1065 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
1066 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
1067 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
1068 +boot_update_conf=if nand info ; then setenv bootconf $bootconf_base#$bootconf_emmc#$bootconf_nand ; else setenv bootconf $bootconf_base#$bootconf_emmc#$bootconf_nor ; fi
1069 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
1070 +mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
1071 +part_default=production
1072 +part_recovery=recovery
1073 +reset_factory=eraseenv && reset
1074 +emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
1075 +emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
1076 +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
1077 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
1078 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
1079 +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
1080 +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
1081 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
1082 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
1083 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"