hardware/danube/bootlog

   1
   2 ROM VER: 1.0.3
   3 CFG 01
   4 Readà
   5 ROM VER: 1.0.3
   6 CFG 01
   7 Read EEPROMX
   8 üHVCáU-Boot 1.0.5
   9 DRAM:  32 MB
  10
  11  relocate_code start
  12  relocate code finish
  13
  14 Entering flash_init()
  15 Flash:  8 MB
  16 env_relocate[226] malloced ENV at 81f80008
  17 env_relocate finished
  18 entering devices_init
  19 In:    serial
  20 Out:   serial
  21 Err:   serial
  22 console_init_r finished!
  23 Net:   danube Switch
  24
  25 Type "run flash_nfs" to mount root filesystem over NFS
  26
  27 Hit any key to stop autoboot:  3 \b\b\b 0
  28 DANUBE #
  29 Unknown command '<NULL>' - try 'help'
  30 DANUBE # printenv
  31 bootcmd=run flash_flash
  32 bootdelay=3
  33 baudrate=115200
  34 preboot=echo;echo Type "run flash_nfs" to mount root filesystem over NFS;echo
  35 ethaddr=00:01:22:33:44:55
  36 netdev=eth0
  37 baudrate=115200
  38 nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath)
  39 ramargs=setenv bootargs root=/dev/ram rw
  40 addip=setenv bootargs $(bootargs) ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname):$(netdev):on
  41 addmisc=setenv bootargs $(bootargs) console=ttyS1,$(baudrate) ethaddr=$(ethaddr) mem=31M panic=1
  42 flash_nfs=run nfsargs addip addmisc;bootm $(kernel_addr)
  43 flash_self=run ramargs addip addmisc;bootm $(kernel_addr) $(ramdisk_addr)
  44 net_nfs=tftp 80500000 $(bootfile);run nfsargs addip addmisc;bootm
  45 net_ram=tftp 80500000 $(bootfile);run ramargs addip addmisc;bootm
  46 net_flash=tftp 80500000 $(bootfile);run flashargs addip addmisc;bootm
  47 flash_flash=run flashargs addip addmisc; bootm $(f_kernel_addr)
  48 rootpath=/mnt/danube_rootfs
  49 bootfile=uImage
  50 kernel_addr=80500000
  51 ramdisk_addr=B0100000
  52 u-boot=/tftpboot/danube/u-boot.bin
  53 load=tftp 80500000 $(u-boot)
  54 update=protect off 1:0-2;era 1:0-2;cp.b 80500000 B0000000 $(filesize)
  55 flashargs=setenv bootargs root=/dev/mtdblock2
  56 update_uboot=tftpboot 80500000 u-boot.bin;erase b0000000 b002ffff;cp.b 80500000 b0000000 $(filesize)
  57 update_rootfs=tftpboot 80500000 rootfs.img;upgrade rootfs 80500000 $(filesize) 0
  58 update_kernel=tftpboot 80500000 uImage;erase $(f_kernel_addr) b03bffff;cp.b 80500000 $(f_kernel_addr) $(filesize)
  59 update_firmware=tftpboot 80500000 firmware.img;upgrade firmware 80500000 $(filesize) 0
  60 reset_uboot_config=erase b0030000 b004ffff
  61 f_uboot_addr=0xb0000000
  62 f_uboot_size=0x30000
  63 f_firmware_addr=0xb03c0000
  64 f_firmware_size=0x40000
  65 f_rootfs_addr=0xb0050000
  66 f_rootfs_size=0x280000
  67 f_rootfs_end=0xb02cffff
  68 f_kernel_addr=0xb02d0000
  69 f_kernel_size=0xf0000
  70 f_kernel_end=0xb03bffff
  71 f_sysconfig_addr=0xb0400000
  72 f_sysconfig_size=0x10000
  73 f_voip_addr=0xb0410000
  74 f_voip_size=0x10000
  75 flash_end=0xb0420000
  76 part0_begin=0xB0000000
  77 part1_begin=0xB0030000
  78 part2_begin=0xB0050000
  79 part3_begin=0xB02F0000
  80 part4_begin=0xB03C0000
  81 part5_begin=0xB0400000
  82 part6_begin=0xB0410000
  83 total_part=7
  84 bootargs=root=/dev/mtdblock2 ip=172.20.80.23:172.20.80.237::::eth0:on console=ttyS1,115200 ethaddr=00:01:22:33:44:55 mem=31M panic=1
  85 filesize=1fd040
  86 ipaddr=10.10.10.10
  87 serverip=10.10.10.123
  88 stdin=serial
  89 stdout=serial
  90 stderr=serial
  91
  92 Environment size: 2356/131068 bytes
  93 DANUBE # flinfo
  94
  95 Bank # 1: MXIC  29LV640BB (64 Mbit, boot sector SA0~SA126 size 64k bytes,other sectors SA127~SA135 size 8k bytes)
  96   Size: 8 MB in 135 Sectors
  97   Sector Start Addresses:
  98     B0000000      B0002000      B0004000      B0006000      B0008000
  99     B000A000      B000C000      B000E000      B0010000      B0020000
 100     B0030000      B0040000      B0050000      B0060000      B0070000
 101     B0080000      B0090000      B00A0000      B00B0000      B00C0000
 102     B00D0000      B00E0000      B00F0000      B0100000      B0110000
 103     B0120000      B0130000      B0140000      B0150000      B0160000
 104     B0170000      B0180000      B0190000      B01A0000      B01B0000
 105     B01C0000      B01D0000      B01E0000      B01F0000      B0200000
 106     B0210000      B0220000      B0230000      B0240000      B0250000
 107     B0260000      B0270000      B0280000      B0290000      B02A0000
 108     B02B0000      B02C0000      B02D0000      B02E0000      B02F0000
 109     B0300000      B0310000      B0320000      B0330000      B0340000
 110     B0350000      B0360000      B0370000      B0380000      B0390000
 111     B03A0000      B03B0000      B03C0000      B03D0000      B03E0000
 112     B03F0000      B0400000      B0410000      B0420000      B0430000
 113     B0440000      B0450000      B0460000      B0470000      B0480000
 114     B0490000      B04A0000      B04B0000      B04C0000      B04D0000
 115     B04E0000      B04F0000      B0500000      B0510000      B0520000
 116     B0530000      B0540000      B0550000      B0560000      B0570000
 117     B0580000      B0590000      B05A0000      B05B0000      B05C0000
 118     B05D0000      B05E0000      B05F0000      B0600000      B0610000
 119     B0620000      B0630000      B0640000      B0650000      B0660000
 120     B0670000      B0680000      B0690000      B06A0000      B06B0000
 121     B06C0000      B06D0000      B06E0000      B06F0000      B0700000
 122     B0710000      B0720000      B0730000      B0740000      B0750000
 123     B0760000      B0770000      B0780000      B0790000      B07A0000
 124     B07B0000      B07C0000      B07D0000      B07E0000      B07F0000
 125 DANUBE #
 126
 127 Bank # 1: MXIC  29LV640BB (64 Mbit, boot sector SA0~SA126 size 64k bytes,other sectors SA127~SA135 size 8k bytes)
 128   Size: 8 MB in 135 Sectors
 129   Sector Start Addresses:
 130     B0000000      B0002000      B0004000      B0006000      B0008000
 131     B000A000      B000C000      B000E000      B0010000      B0020000
 132     B0030000      B0040000      B0050000      B0060000      B0070000
 133     B0080000      B0090000      B00A0000      B00B0000      B00C0000
 134     B00D0000      B00E0000      B00F0000      B0100000      B0110000
 135     B0120000      B0130000      B0140000      B0150000      B0160000
 136     B0170000      B0180000      B0190000      B01A0000      B01B0000
 137     B01C0000      B01D0000      B01E0000      B01F0000      B0200000
 138     B0210000      B0220000      B0230000      B0240000      B0250000
 139     B0260000      B0270000      B0280000      B0290000      B02A0000
 140     B02B0000      B02C0000      B02D0000      B02E0000      B02F0000
 141     B0300000      B0310000      B0320000      B0330000      B0340000
 142     B0350000      B0360000      B0370000      B0380000      B0390000
 143     B03A0000      B03B0000      B03C0000      B03D0000      B03E0000
 144     B03F0000      B0400000      B0410000      B0420000      B0430000
 145     B0440000      B0450000      B0460000      B0470000      B0480000
 146     B0490000      B04A0000      B04B0000      B04C0000      B04D0000
 147     B04E0000      B04F0000      B0500000      B0510000      B0520000
 148     B0530000      B0540000      B0550000      B0560000      B0570000
 149     B0580000      B0590000      B05A0000      B05B0000      B05C0000
 150     B05D0000      B05E0000      B05F0000      B0600000      B0610000
 151     B0620000      B0630000      B0640000      B0650000      B0660000
 152     B0670000      B0680000      B0690000      B06A0000      B06B0000
 153     B06C0000      B06D0000      B06E0000      B06F0000      B0700000
 154     B0710000      B0720000      B0730000      B0740000      B0750000
 155     B0760000      B0770000      B0780000      B0790000      B07A0000
 156     B07B0000      B07C0000      B07D0000      B07E0000      B07F0000
 157 DANUBE # run bootcmd
 158 ## Booting image at b02d0000 ...
 159    Image Name:   MIPS Linux-2.4.31-Danube-3.0.3-G
 160    Created:      2006-10-12  11:35:12 UTC
 161    Image Type:   MIPS Linux Kernel Image (gzip compressed)
 162    Data Size:    854782 Bytes = 834.7 kB
 163    Load Address: 80002000
 164    Entry Point:  801ca040
 165    Verifying Checksum ... OK
 166    Uncompressing Kernel Image ... OK
 167
 168 Starting kernel ...
 169
 170 TODO: chip version
 171 memsize=32l
 172 flash_start=0xb0000000
 173 flash_size=8388608l
 174 Reserving memory for CP1 @0xa1f00000
 175 memsize=31
 176 CPU revision is: 00019641
 177 Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
 178 Primary data cache 16kB, 4-way, linesize 32 bytes.
 179 Linux version 2.4.31-Danube-3.0.3-G0432V30V (root@localhost) (gcc version 3.3.6) #2 å10æ\9c\88 12 19:35:05 CST 2006
 180 Can't analyze prologue code at 8001e360
 181 Determined physical RAM map:
 182 User-defined physical RAM map:
 183  memory: 01f00000 @ 00000000 (usable)
 184 On node 0 totalpages: 7936
 185 zone(0): 7936 pages.
 186 zone(1): 0 pages.
 187 zone(2): 0 pages.
 188 Kernel command line: root=/dev/mtdblock2 ip=10.10.10.10:10.10.10.123::::eth0:on console=ttyS1,115200 ethaddr=00:01:22:33:44:55 mem=31M panic=1
 189 ethaddr_setup: mac address  0- 1-22-33-44-55
 190 mips_hpt_frequency:166666667
 191 r4k_offset: 00196e6a(1666666)
 192 Using 166.667 MHz high precision timer.
 193 Syam before calibrate_delay
 194 Calibrating delay loop...
 195 222.00 BogoMIPS
 196 Syam after calibrate_delay
 197 MIPS CPU counter frequency is fixed at 166666667 Hz
 198 Memory: 28728k/31744k available (1808k kernel code, 3016k reserved, 108k data, 100k init, 0k highmem)
 199 Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
 200 Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
 201 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 202 Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
 203 Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
 204 Checking for 'wait' instruction...  unavailable.
 205 POSIX conformance testing by UNIFIX
 206 Linux NET4.0 for Linux 2.4
 207 Based upon Swansea University Computer Society NET3.039
 208 Initializing RT netlink socket
 209 LSP Revision 1
 210 Starting kswapd
 211 Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
 212 pty: 256 Unix98 ptys configured
 213 ttyS0 at MEM 0xbe100400 (irq = 2) is a IFX_ASC
 214 ttyS1 at MEM 0xbe100c00 (irq = 9) is a IFX_ASC
 215 <6>Danube PMU driver v0.3
 216 cgu: misc_register on minor = 63
 217 gptu: totally 6 16-bit timers/counters
 218 gptu: misc_register on minor 62
 219 gptu: succeeded to request irq 118
 220 gptu: succeeded to request irq 119
 221 gptu: succeeded to request irq 120
 222 gptu: succeeded to request irq 121
 223 gptu: succeeded to request irq 122
 224 gptu: succeeded to request irq 123
 225 led: misc_register on minor = 151
 226 memcopy_init: memcopy init
 227 loop: loaded (max 8 devices)
 228 PPP generic driver version 2.4.2
 229 danube MAC driver loaded!
 230 Loading 2nd ETH driver... init succeeded
 231 oamk: init_module() called.
 232 Opening oam kernel socket
 233 oamk: init_module() returned.
 234 init_danube_mtd: start_scan_addr: b0000000
 235 init_danube_mtd: chip probing count 0
 236 Danube: probing address:b0000000
 237  Amd/Fujitsu Extended Query Table v1.1 at 0x0040
 238 number of CFI chips: 1
 239 cfi_cmdset_0002: Disabling fast programming due to code brokenness.
 240 init_danube_mtd: bank1, name:Danube Bank 0, size:8388608bytes
 241 DANUBE flash0: Using static image partition definition
 242 Creating 7 MTD partitions on "Danube Bank 0":
 243 0x00000000-0x00030000 : "U-Boot"
 244 0x00030000-0x00050000 : "Environment"
 245 0x00050000-0x002f0000 : "rootfs"
 246 0x002f0000-0x003c0000 : "Linux"
 247 0x003c0000-0x00400000 : "firmware"
 248 0x00400000-0x00410000 : "User-Data"
 249 0x00410000-0x00420000 : "voip-Data"
 250 Initializing Cryptographic API
 251 NET4: Linux TCP/IP 1.0 for NET4.0
 252 IP Protocols: ICMP, UDP, TCP, IGMP
 253 IP: routing cache hash table of 512 buckets, 4Kbytes
 254 TCP: Hash tables configured (established 2048 bind 4096)
 255 Linux IP multicast router 0.06 plus PIM-SM
 256 IP-Config: Guessing netmask 255.0.0.0
 257 IP-Config: Complete:
 258       device=eth0, addr=10.10.10.10, mask=255.0.0.0, gw=255.255.255.255,
 259      host=10.10.10.10, domain=, nis-domain=(none),
 260      bootserver=10.10.10.123, rootserver=10.10.10.123, rootpath=
 261 ip_conntrack version 2.1 (248 buckets, 1984 max) - 624 bytes per conntrack
 262 ip_conntrack_pptp version 1.9 loaded
 263 ip_nat_pptp version 1.5 loaded
 264 ip_tables: (C) 2000-2002 Netfilter core team
 265 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 266 Ebtables v2.0 registered
 267 NET4: Ethernet Bridge 008 for NET4.0
 268 Bridge firewalling registered
 269 Danube Port Initialization
 270 DANUBE MIPS24KEc MPS mailbox driver, Version 1.1.0
 271 (c) Copyright 2006, Infineon Technologies AG
 272 IFX_MPS: using proc fs
 273 VFS: Mounted root (squashfs filesystem) readonly.
 274 Freeing unused kernel memory: 100k freed
 275 init started:  BusyBox v1.00 (2006.10.12-11:36+0000) multi-call binary
 276 Algorithmics/MIPS FPU Emulator v1.5
 277 Created character device /dev/danube-port with major[247] and minor[0]
 278 1+0 records in
 279 1+0 records out
 280 Mount ADSL Firmware Now
 281 part_begin_addr=0xb0400000
 282 mtd_dev=/dev/mtd/5
 283 autoboot open /dev/danube/mei fail
 284 Using /lib/modules/2.4.31-Danube-3.0.3-G0432V30V/kernel/net/ifx_nfext/ifx_nfext_core.o
 285 Using /lib/modules/2.4.31-Danube-3.0.3-G0432V30V/kernel/net/ifx_nfext/ifx_nfext_ppp.o
 286 Using /lib/modules/2.4.31-Danube-3.0.3-G0432V30V/kernel/drivers/net/admmod.o
 287 Loading ADM6996 driver...
 288
 289 6996I SMI Mode-Chip ID:71023
 290  Bringing up syslog
 291 Bringing up klogd
 292 <6>device eth0 entered promiscuous mode
 293 br0: port 1(eth0) entering learning state
 294 br0: port 1(eth0) entering forwarding state
 295 br0: topology change detected, propagating
 296 --VDSL2 Pre Initialization   --
 297 Init VDSL2 CPE Ref environment
 298
 299 - loading VDSL2 CPE Ref Board - board driver -
 300 *** Creating dir:  /dev/adm5120_rb
 301 *** Creating node: /dev/adm5120_rb/0
 302 Using ./drv_adm5120_rb
 303 cat: /proc/mei/version: No such file or directory
 304 ADM5120 Board Driver, Version 0.0.4.1
 305 <6>(c) Copyright 2003, Infineon Technologies AG
 306
 307 - loading VDSL2 CPE board - DFE driver -
 308 *** Creating dir:  /dev/vinax
 309 *** Creating node: /dev/vinax/cntrl0
 310 3.0.3-432-V30WV
 311 *** Creating node: /dev/vinax/0
 312 Using ./drv_vinax
 313 <6>VINAX Driver, Version 0.1.0.2
 314 <6>(c) Copyright 2005, Infineon Technologies AG
 315 <6>### VINAX - VINAX - VINAX - VINAX ###
 316 <7>VINAX_DRV: create proc config entry
 317 --> Add VINAX tick to timer queue
 318
 319 board driver <drv_adm5120_rb> loaded
 320 --> AInitializes the MultiPort Memory Controller for the VDSL2 DFEBoard_InitIrq!
 321 mazon-Vinax test: open device: /dev/adm5120_rb/0.
 322 --> Amazon-Vinax test: close(3) device: //dev/adm5120_rb/0.
 323 current HW type is CPE_MODE
 324 +++ setup CPE firmware vcpe_hw.bin +++
 325 ln: ./firmware.bin: File exists
 326 ln: ./firmware0.bin: File exists
 327 ln: ./firmware1.bin: File exists
 328 MEI driver <drv_vinax> loaded
 329 init Danube-Vinax MEI base addr=0x14000000 poVINAX_DRV[00]: ERROR - INIT DEVICE, HW failure
 330 lling mode
 331 !!! RESET the VDSL2 device (via MEI) !!!
 332 set VINAX DFE config
 333 VDSL2 pre init done
 334 ---VDSL2 Post Initialization --
 335 VDSL2 initialisation - post
 336 Start VDSL2 CPE Ref environment
 337 Start VINAX firmeware download
 338 --> test: open device: /dev/vinax/0.
 339 <6>device nas1 entered promiscuous mode
 340 br0: port 2(nas1) entering learning state
 341 StartVINAX_DRV[00-01] Error ioctl - missing init, invalid cmd !!!
 342  Download <firmware.bin>, size: 540148
 343 --> test: ERROR - ioct(FIO_VINAX_FW_DL), Operation not permitted, retCode = -1021
 344 Start VDSL2 DSL DAEMON Application
 345 DSL: start DSL daemon.
 346 DSL: DSL daemon running in background now!
 347 DSL: Device granularity is 1
 348 DSL: No firmware pointer
 349 DSL: No 2nd firmware pointer
 350 DSL: Given warmstart memory will be analyzed...
 351 DSL: ...No warmstart memory defined
 352 DSL: ...Using memory allocation via DSL_Malloc() for ALL data base sections
 353 DSL: ...Startup mode: COLDSTART
 354 DSL: No mapping information (line -> device channel) provided. Taking internal default settings.
 355 DSL[00]: VINAX init failed, no valid data
 356 DSL[00]: VINAX driver init failed
 357 DSL: Thread PID for thread tPM_Tick is 1006
 358 DSL:
 359 DSL: *****************************************************
 360 DSL: DSL library version: 1.5.1
 361 DSL: *****************************************************
 362 DSL: Number of devices       :   1
 363 DSL: Number of lines         :   1
 364 DSL: Number of lines/device  :   1
 365 DSL: Number of channels/line :   2
 366 DSL:
 367 DSL: Memory usage of warm start resistent data base
 368 DSL:   magic key data base         :       4 bytes
 369 DSL:   line config data base       :     316 bytes
 370 DSL:   channel config data base    :     184 bytes
 371 DSL:   line array config data base :    2424 bytes
 372 DSL:                                --------------
 373 DSL:   Total                       :    2928 bytes
 374 DSL:
 375 DSL: Memory usage of status data base
 376 DSL:   line status data base       :     220 bytes
 377 DSL:   channel status data base    :     408 bytes
 378 DSL:                                --------------
 379 DSL:   Total                       :     628 bytes
 380 DSL:
 381 DSL: Context memory usage
 382 DSL:   context structure           :    1128 bytes
 383 DSL:   Timeout event lists         :      32 bytes
 384 DSL:                                --------------
 385 DSL:   Total                       :    1160 b<6>br0: port 2(nas1) entering forwarding state
 386 br0: topology change detected, propagating
 387 ytes
 388 DSL: *****************************************************
 389 DSL:
 390 DSL: Thread PID for thread tPipe_0 is 1007
 391 DSL: Thread PID for thread tPipe_1 is 1008
 392 iptables: No chain/target/match by that name
 393 iptables: No chain/target/match by that name
 394 DSL: Thread PID for thread tPipe_2 is 1015
 395 nReturn=0 nLine=0
 396
 397 VDSL2 post init done
 398 device eth2 entered promiscuous mode
 399 br0: port 3(eth2) entering learning state
 400 installing mps devices...
 401
 402 +--------------------------------------+
 403 | Linux/MIPS on DANUBE by Infineon COM AC BB_CPE |
 404 +--------------------------------------+
 405 br0: port 3(eth2) entering forwarding state
 406 br0: topology change detected, propagating
 407
 408 danube login: root
 409 Password:
 410 Login incorrect
 411 danube login:
 412 Login ti
 413 danube login: admin
 414 Password:
 415 Login incorrect
 416 danube login: root
 417 Password:
 418
 419
 420 BusyBox v1.00 (2006.10.12-11:36+0000) Built-in shell (msh)
 421 Enter 'help' for a list of built-in commands.
 422
 423 # lspci
 424 lspci: not found
 425 # \a
 426 \[                    grep                  pwd
 427 adm6996               gunzip                read_img
 428 basename              gzip                  reboot
 429 br2684ctl             hostname              ripd
 430 br2684ctld            httpd                 rm
 431 brctl                 ifconfig              rmmod
 432 bringup_dns_relay     ifx_util              route
 433 bringup_oam           inetd                 sh
 434 bringup_pppoa         init                  sleep
 435 bringup_pppoe         insmod                snmpd
 436 bringup_wan           iptables              status_oper
 437 bringup_wan_service   kill                  swreset
 438 busybox               killall               syslogd
 439 cat                   klogd                 tail
 440 chmod                 ln                    tar
 441 chroot                logger                tc
 442 cli_be                login                 telnetd
 443 cli_fe                logread               test
 444 cmvread               ls                    tftpd
 445 cmvwrite              mem                   top
 446 cp                    mkdir                 touch
 447 cut                   mknod                 tr
 448 date                  mknod_util            true
 449 dd                    modprobe.sh           tty
 450 dmesg                 more                  udhcpc
 451 dnrd                  mount                 udhcpd
 452 dumpleases            mpstat                udhcpr
 453 echo                  msh                   umount
 454 env                   mv                    uname
 455 expr                  naptcfg               upgrade
 456 false                 next_macaddr          uptime
 457 fgrep                 oamctl                usleep
 458 free                  oamd                  version.sh
 459 get_adsl_rate         passwd                vlanctl
 460 get_atmqos_name       ping                  zcat
 461 get_if_index          pppd
 462 getty                 ps
 463 # dmesg
 464 memsize=32l
 465 flash_start=0xb0000000
 466 flash_size=8388608l
 467 Reserving memory for CP1 @0xa1f00000
 468 memsize=31
 469 CPU revision is: 00019641
 470 Primary instruction cache 16kB, physically tagged, 4-way, linesize 32 bytes.
 471 Primary data cache 16kB, 4-way, linesize 32 bytes.
 472 Linux version 2.4.31-Danube-3.0.3-G0432V30V (root@localhost) (gcc version 3.3.6) #2 å10æ\9c\88 12 19:35:05 CST 2006
 473 Can't analyze prologue code at 8001e360
 474 Determined physical RAM map:
 475 User-defined physical RAM map:
 476  memory: 01f00000 @ 00000000 (usable)
 477 On node 0 totalpages: 7936
 478 zone(0): 7936 pages.
 479 zone(1): 0 pages.
 480 zone(2): 0 pages.
 481 Kernel command line: root=/dev/mtdblock2 ip=10.10.10.10:10.10.10.123::::eth0:on console=ttyS1,115200 ethaddr=00:01:22:33:44:55 mem=31M panic=1
 482 ethaddr_setup: mac address  0- 1-22-33-44-55
 483 mips_hpt_frequency:166666667
 484 r4k_offset: 00196e6a(1666666)
 485 Using 166.667 MHz high precision timer.
 486 Syam before calibrate_delay
 487 Calibrating delay loop...
 488 Syam after calibrate_delay
 489 MIPS CPU counter frequency is fixed at 166666667 Hz
 490 Memory: 28728k/31744k available (1808k kernel code, 3016k reserved, 108k data, 100k init, 0k highmem)
 491 Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
 492 Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
 493 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
 494 Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
 495 Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
 496 Checking for 'wait' instruction...  unavailable.
 497 POSIX conformance testing by UNIFIX
 498 Linux NET4.0 for Linux 2.4
 499 Based upon Swansea University Computer Society NET3.039
 500 Initializing RT netlink socket
 501 LSP Revision 1
 502 Starting kswapd
 503 Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
 504 pty: 256 Unix98 ptys configured
 505 ttyS0 at MEM 0xbe100400 (irq = 2) is a IFX_ASC
 506 ttyS1 at MEM 0xbe100c00 (irq = 9) is a IFX_ASC
 507 <6>Danube PMU driver v0.3
 508 cgu: misc_register on minor = 63
 509 gptu: totally 6 16-bit timers/counters
 510 gptu: misc_register on minor 62
 511 gptu: succeeded to request irq 118
 512 gptu: succeeded to request irq 119
 513 gptu: succeeded to request irq 120
 514 gptu: succeeded to request irq 121
 515 gptu: succeeded to request irq 122
 516 gptu: succeeded to request irq 123
 517 led: misc_register on minor = 151
 518 memcopy_init: memcopy init
 519 loop: loaded (max 8 devices)
 520 PPP generic driver version 2.4.2
 521 danube MAC driver loaded!
 522 Loading 2nd ETH driver... init succeeded
 523 oamk: init_module() called.
 524 Opening oam kernel socket
 525 oamk: init_module() returned.
 526 init_danube_mtd: start_scan_addr: b0000000
 527 init_danube_mtd: chip probing count 0
 528 Danube: probing address:b0000000
 529  Amd/Fujitsu Extended Query Table v1.1 at 0x0040
 530 number of CFI chips: 1
 531 cfi_cmdset_0002: Disabling fast programming due to code brokenness.
 532 init_danube_mtd: bank1, name:Danube Bank 0, size:8388608bytes
 533 DANUBE flash0: Using static image partition definition
 534 Creating 7 MTD partitions on "Danube Bank 0":
 535 0x00000000-0x00030000 : "U-Boot"
 536 0x00030000-0x00050000 : "Environment"
 537 0x00050000-0x002f0000 : "rootfs"
 538 0x002f0000-0x003c0000 : "Linux"
 539 0x003c0000-0x00400000 : "firmware"
 540 0x00400000-0x00410000 : "User-Data"
 541 0x00410000-0x00420000 : "voip-Data"
 542 Initializing Cryptographic API
 543 NET4: Linux TCP/IP 1.0 for NET4.0
 544 IP Protocols: ICMP, UDP, TCP, IGMP
 545 IP: routing cache hash table of 512 buckets, 4Kbytes
 546 TCP: Hash tables configured (established 2048 bind 4096)
 547 Linux IP multicast router 0.06 plus PIM-SM
 548 IP-Config: Guessing netmask 255.0.0.0
 549 IP-Config: Complete:
 550       device=eth0, addr=10.10.10.10, mask=255.0.0.0, gw=255.255.255.255,
 551      host=10.10.10.10, domain=, nis-domain=(none),
 552      bootserver=10.10.10.123, rootserver=10.10.10.123, rootpath=
 553 ip_conntrack version 2.1 (248 buckets, 1984 max) - 624 bytes per conntrack
 554 ip_conntrack_pptp version 1.9 loaded
 555 ip_nat_pptp version 1.5 loaded
 556 ip_tables: (C) 2000-2002 Netfilter core team
 557 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
 558 Ebtables v2.0 registered
 559 NET4: Ethernet Bridge 008 for NET4.0
 560 Bridge firewalling registered
 561 Danube Port Initialization
 562 DANUBE MIPS24KEc MPS mailbox driver, Version 1.1.0
 563 (c) Copyright 2006, Infineon Technologies AG
 564 IFX_MPS: using proc fs
 565 VFS: Mounted root (squashfs filesystem) readonly.
 566 Freeing unused kernel memory: 100k freed
 567 Algorithmics/MIPS FPU Emulator v1.5
 568 Loading ADM6996 driver...
 569
 570 6996I SMI Mode-Chip ID:71023
 571  <6>device eth0 entered promiscuous mode
 572 br0: port 1(eth0) entering learning state
 573 br0: port 1(eth0) entering forwarding state
 574 br0: topology change detected, propagating
 575 ADM5120 Board Driver, Version 0.0.4.1
 576 <6>(c) Copyright 2003, Infineon Technologies AG
 577 <6>VINAX Driver, Version 0.1.0.2
 578 <6>(c) Copyright 2005, Infineon Technologies AG
 579 <6>### VINAX - VINAX - VINAX - VINAX ###
 580 <7>VINAX_DRV: create proc config entry
 581 --> Add VINAX tick to timer queue
 582 Initializes the MultiPort Memory Controller for the VDSL2 DFEBoard_InitIrq!
 583 VINAX_DRV[00]: ERROR - INIT DEVICE, HW failure
 584 <6>device nas1 entered promiscuous mode
 585 br0: port 2(nas1) entering learning state
 586 VINAX_DRV[00-01] Error ioctl - missing init, invalid cmd !!!
 587 <6>br0: port 2(nas1) entering forwarding state
 588 br0: topology change detected, propagating
 589 device eth2 entered promiscuous mode
 590 br0: port 3(eth2) entering learning state
 591 br0: port 3(eth2) entering forwarding state
 592 br0: topology change detected, propagating
 593 # ls /p\b\b# ls /proc/
 594 1            4            cpuinfo      eth2         loadavg      slabinfo
 595 1005         5            crypto       execdomains  locks        stat
 596 1006         6            danube_bcu   filesystems  lspinfo      swaps
 597 1007         67           danube_dma   fs           meminfo      sys
 598 1008         7            danube_etop  interrupts   misc         sysvipc
 599 1015         74           danube_pmu   iomem        modules      tty
 600 1039         80           danube_rcu   ioports      mounts       uptime
 601 1042         808          danube_wdt   irq          mtd          version
 602 17           994          devices      kcore        net
 603 2            bus          dma          kmsg         partitions
 604 3            cmdline      driver       ksyms        self
 605 # mount
 606 /dev/root on / type squashfs (ro)
 607 proc on /proc type proc (rw)
 608 /dev/ram on /ramdisk type ramfs (rw)
 609 /dev/ram on /dev type ramfs (rw)
 610 /dev/mtdblock/4 on /firmware type squashfs (ro)
 611 # cat /p\b\b# cat /proc/bu# cat /proc/bus/p\ac\a\b \b\a\b \b\a\b \b\b \b\b \b\b \b\a# cat /proc/
 612 /proc/1/            /proc/80/           /proc/eth2/         /proc/modules
 613 /proc/1005/         /proc/808/          /proc/execdomains   /proc/mounts
 614 /proc/1006/         /proc/994/          /proc/filesystems   /proc/mtd
 615 /proc/1007/         /proc/bus/          /proc/fs/           /proc/net/
 616 /proc/1008/         /proc/cmdline       /proc/interrupts    /proc/partitions
 617 /proc/1015/         /proc/cpuinfo       /proc/iomem         /proc/self/
 618 /proc/1039/         /proc/crypto        /proc/ioports       /proc/slabinfo
 619 /proc/17/           /proc/danube_bcu    /proc/irq/          /proc/stat
 620 /proc/2/            /proc/danube_dma/   /proc/kcore         /proc/swaps
 621 /proc/3/            /proc/danube_etop/  /proc/kmsg          /proc/sys/
 622 /proc/4/            /proc/danube_pmu    /proc/ksyms         /proc/sysvipc/
 623 /proc/5/            /proc/danube_rcu    /proc/loadavg       /proc/tty/
 624 /proc/6/            /proc/danube_wdt    /proc/locks         /proc/uptime
 625 /proc/67/           /proc/devices       /proc/lspinfo/      /proc/version
 626 /proc/7/            /proc/dma           /proc/meminfo
 627 /proc/74/           /proc/driver/       /proc/misc
 628 # cat /proc/bu# cat /proc/bus/\a
 629 cat: Read error: Is a directory
 630 # # cat /proc/bus/at /proc/bus/ t /proc/bus/  /proc/bus/ l /proc/bus/s /proc/bus/ /proc/bus/
 631 # cat /p\b\b# cat /proc/mem# cat /proc/meminfo
 632         total:    used:    free:  shared: buffers:  cached:
 633 Mem:  29519872 10489856 19030016        0  1298432  4550656
 634 Swap:        0        0        0
 635 MemTotal:        28828 kB
 636 MemFree:         18584 kB
 637 MemShared:           0 kB
 638 Buffers:          1268 kB
 639 Cached:           4444 kB
 640 SwapCached:          0 kB
 641 Active:           2780 kB
 642 Inactive:         2956 kB
 643 HighTotal:           0 kB
 644 HighFree:            0 kB
 645 LowTotal:        28828 kB
 646 LowFree:         18584 kB
 647 SwapTotal:           0 kB
 648 SwapFree:            0 kB
 649 # cat /p\b\b# cat /proc/cp# cat /proc/cpuinfo
 650 system type             : DANUBE
 651 processor               : 0
 652 cpu model               : unknown V4.1
 653 BogoMIPS                : 222.00
 654 wait instruction        : no
 655 microsecond timers      : yes
 656 tlb_entries             : 16
 657 extra interrupt vector  : yes
 658 hardware watchpoint     : yes
 659 VCED exceptions         : not available
 660 VCEI exceptions         : not available
 661 #