commands-wds.h

   1 /*
   2  * uqmi -- tiny QMI support implementation
   3  *
   4  * Copyright (C) 2014-2015 Felix Fietkau <nbd@openwrt.org>
   5  *
   6  * This library is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU Lesser General Public
   8  * License as published by the Free Software Foundation; either
   9  * version 2 of the License, or (at your option) any later version.
  10  *
  11  * This library is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  * Lesser General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU Lesser General Public
  17  * License along with this library; if not, write to the
  18  * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
  19  * Boston, MA 02110-1301 USA.
  20  */
  21
  22 #define __uqmi_wds_commands \
  23         __uqmi_command(wds_start_network, start-network, no, QMI_SERVICE_WDS), \
  24         __uqmi_command(wds_set_apn, apn, required, CMD_TYPE_OPTION), \
  25         __uqmi_command(wds_set_auth, auth-type, required, CMD_TYPE_OPTION), \
  26         __uqmi_command(wds_set_username, username, required, CMD_TYPE_OPTION), \
  27         __uqmi_command(wds_set_password, password, required, CMD_TYPE_OPTION), \
  28         __uqmi_command(wds_set_ip_family_pref, ip-family, required, CMD_TYPE_OPTION), \
  29         __uqmi_command(wds_set_autoconnect, autoconnect, no, CMD_TYPE_OPTION), \
  30         __uqmi_command(wds_set_profile, profile, required, CMD_TYPE_OPTION), \
  31         __uqmi_command(wds_stop_network, stop-network, required, QMI_SERVICE_WDS), \
  32         __uqmi_command(wds_get_packet_service_status, get-data-status, no, QMI_SERVICE_WDS), \
  33         __uqmi_command(wds_set_ip_family, set-ip-family, required, QMI_SERVICE_WDS), \
  34         __uqmi_command(wds_set_autoconnect_setting, set-autoconnect, required, QMI_SERVICE_WDS), \
  35         __uqmi_command(wds_reset, reset-wds, no, QMI_SERVICE_WDS), \
  36         __uqmi_command(wds_get_current_settings, get-current-settings, no, QMI_SERVICE_WDS) \
  37
  38
  39 #define wds_helptext \
  40                 "  --start-network:                  Start network connection (use with options below)\n" \
  41                 "    --apn <apn>:                    Use APN\n" \
  42                 "    --auth-type pap|chap|both|none: Use network authentication type\n" \
  43                 "    --username <name>:              Use network username\n" \
  44                 "    --password <password>:          Use network password\n" \
  45                 "    --ip-family <family>:           Use ip-family for the connection (ipv4, ipv6, unspecified)\n" \
  46                 "    --autoconnect:                  Enable automatic connect/reconnect\n" \
  47                 "    --profile <index>:              Use connection profile\n" \
  48                 "  --stop-network <pdh>:             Stop network connection (use with option below)\n" \
  49                 "    --autoconnect:                  Disable automatic connect/reconnect\n" \
  50                 "  --get-data-status:                Get current data access status\n" \
  51                 "  --set-ip-family <val>:            Set ip-family (ipv4, ipv6, unspecified)\n" \
  52                 "  --set-autoconnect <val>:          Set automatic connect/reconnect (disabled, enabled, paused)\n" \
  53                 "  --get-current-settings:           Get current connection settings\n" \
  54