+++ /dev/null
-From 6d16eadab6db0c1d61e59fee7ed1ecc2d10269be Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Mon, 15 Mar 2021 15:14:23 +0100
-Subject: [PATCH] net: dsa: b53: spi: allow device tree probing
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add missing of_match_table to allow device tree probing.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_spi.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/net/dsa/b53/b53_spi.c
-+++ b/drivers/net/dsa/b53/b53_spi.c
-@@ -324,9 +324,22 @@ static int b53_spi_remove(struct spi_dev
- return 0;
- }
-
-+static const struct of_device_id b53_spi_of_match[] = {
-+ { .compatible = "brcm,bcm5325" },
-+ { .compatible = "brcm,bcm5365" },
-+ { .compatible = "brcm,bcm5395" },
-+ { .compatible = "brcm,bcm5397" },
-+ { .compatible = "brcm,bcm5398" },
-+ { .compatible = "brcm,bcm53115" },
-+ { .compatible = "brcm,bcm53125" },
-+ { .compatible = "brcm,bcm53128" },
-+ { /* sentinel */ }
-+};
-+
- static struct spi_driver b53_spi_driver = {
- .driver = {
- .name = "b53-switch",
-+ .of_match_table = b53_spi_of_match,
- },
- .probe = b53_spi_probe,
- .remove = b53_spi_remove,
+++ /dev/null
-From ad426d7d966b525b73ed5a1842dd830312bbba71 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 09:42:01 +0100
-Subject: [PATCH] net: dsa: b53: relax is63xx() condition
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-BCM63xx switches are present on bcm63xx and bmips devices.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_priv.h | 4 ----
- 1 file changed, 4 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_priv.h
-+++ b/drivers/net/dsa/b53/b53_priv.h
-@@ -185,11 +185,7 @@ static inline int is531x5(struct b53_dev
-
- static inline int is63xx(struct b53_device *dev)
- {
--#ifdef CONFIG_BCM63XX
- return dev->chip_id == BCM63XX_DEVICE_ID;
--#else
-- return 0;
--#endif
- }
-
- static inline int is5301x(struct b53_device *dev)
+++ /dev/null
-From 964dbf186eaa84d409c359ddf09c827a3fbe8228 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 11:29:26 +0100
-Subject: [PATCH 1/2] net: dsa: tag_brcm: add support for legacy tags
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add support for legacy Broadcom tags, which are similar to DSA_TAG_PROTO_BRCM.
-These tags are used on BCM5325, BCM5365 and BCM63xx switches.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- include/net/dsa.h | 2 +
- net/dsa/Kconfig | 7 +++
- net/dsa/tag_brcm.c | 107 +++++++++++++++++++++++++++++++++++++++++++--
- 3 files changed, 113 insertions(+), 3 deletions(-)
-
---- a/include/net/dsa.h
-+++ b/include/net/dsa.h
-@@ -45,10 +45,12 @@ struct phylink_link_state;
- #define DSA_TAG_PROTO_OCELOT_VALUE 15
- #define DSA_TAG_PROTO_AR9331_VALUE 16
- #define DSA_TAG_PROTO_RTL4_A_VALUE 17
-+#define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22
-
- enum dsa_tag_protocol {
- DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
- DSA_TAG_PROTO_BRCM = DSA_TAG_PROTO_BRCM_VALUE,
-+ DSA_TAG_PROTO_BRCM_LEGACY = DSA_TAG_PROTO_BRCM_LEGACY_VALUE,
- DSA_TAG_PROTO_BRCM_PREPEND = DSA_TAG_PROTO_BRCM_PREPEND_VALUE,
- DSA_TAG_PROTO_DSA = DSA_TAG_PROTO_DSA_VALUE,
- DSA_TAG_PROTO_EDSA = DSA_TAG_PROTO_EDSA_VALUE,
---- a/net/dsa/Kconfig
-+++ b/net/dsa/Kconfig
-@@ -47,6 +47,13 @@ config NET_DSA_TAG_BRCM
- Say Y if you want to enable support for tagging frames for the
- Broadcom switches which place the tag after the MAC source address.
-
-+config NET_DSA_TAG_BRCM_LEGACY
-+ tristate "Tag driver for Broadcom legacy switches using in-frame headers"
-+ select NET_DSA_TAG_BRCM_COMMON
-+ help
-+ Say Y if you want to enable support for tagging frames for the
-+ Broadcom legacy switches which place the tag after the MAC source
-+ address.
-
- config NET_DSA_TAG_BRCM_PREPEND
- tristate "Tag driver for Broadcom switches using prepended headers"
---- a/net/dsa/tag_brcm.c
-+++ b/net/dsa/tag_brcm.c
-@@ -11,9 +11,26 @@
-
- #include "dsa_priv.h"
-
--/* This tag length is 4 bytes, older ones were 6 bytes, we do not
-- * handle them
-- */
-+/* Legacy Broadcom tag (6 bytes) */
-+#define BRCM_LEG_TAG_LEN 6
-+
-+/* Type fields */
-+/* 1st byte in the tag */
-+#define BRCM_LEG_TYPE_HI 0x88
-+/* 2nd byte in the tag */
-+#define BRCM_LEG_TYPE_LO 0x74
-+
-+/* Tag fields */
-+/* 3rd byte in the tag */
-+#define BRCM_LEG_UNICAST (0 << 5)
-+#define BRCM_LEG_MULTICAST (1 << 5)
-+#define BRCM_LEG_EGRESS (2 << 5)
-+#define BRCM_LEG_INGRESS (3 << 5)
-+
-+/* 6th byte in the tag */
-+#define BRCM_LEG_PORT_ID (0xf)
-+
-+/* Newer Broadcom tag (4 bytes) */
- #define BRCM_TAG_LEN 4
-
- /* Tag is constructed and desconstructed using byte by byte access
-@@ -194,6 +211,87 @@ DSA_TAG_DRIVER(brcm_netdev_ops);
- MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM);
- #endif
-
-+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
-+static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
-+ struct net_device *dev)
-+{
-+ struct dsa_port *dp = dsa_slave_to_port(dev);
-+ u8 *brcm_tag;
-+
-+ /* The Ethernet switch we are interfaced with needs packets to be at
-+ * least 64 bytes (including FCS) otherwise they will be discarded when
-+ * they enter the switch port logic. When Broadcom tags are enabled, we
-+ * need to make sure that packets are at least 70 bytes
-+ * (including FCS and tag) because the length verification is done after
-+ * the Broadcom tag is stripped off the ingress packet.
-+ *
-+ * Let dsa_slave_xmit() free the SKB
-+ */
-+ if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false))
-+ return NULL;
-+
-+ skb_push(skb, BRCM_LEG_TAG_LEN);
-+
-+ memmove(skb->data, skb->data + BRCM_LEG_TAG_LEN, 2 * ETH_ALEN);
-+
-+ brcm_tag = skb->data + 2 * ETH_ALEN;
-+
-+ /* Broadcom tag type */
-+ brcm_tag[0] = BRCM_LEG_TYPE_HI;
-+ brcm_tag[1] = BRCM_LEG_TYPE_LO;
-+
-+ /* Broadcom tag value */
-+ brcm_tag[2] = BRCM_LEG_EGRESS;
-+ brcm_tag[3] = 0;
-+ brcm_tag[4] = 0;
-+ brcm_tag[5] = dp->index & BRCM_LEG_PORT_ID;
-+
-+ return skb;
-+}
-+
-+static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
-+ struct net_device *dev,
-+ struct packet_type *pt)
-+{
-+ int source_port;
-+ u8 *brcm_tag;
-+
-+ if (unlikely(!pskb_may_pull(skb, BRCM_LEG_PORT_ID)))
-+ return NULL;
-+
-+ brcm_tag = skb->data - 2;
-+
-+ source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
-+
-+ skb->dev = dsa_master_find_slave(dev, 0, source_port);
-+ if (!skb->dev)
-+ return NULL;
-+
-+ /* Remove Broadcom tag and update checksum */
-+ skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN);
-+
-+ skb->offload_fwd_mark = 1;
-+
-+ /* Move the Ethernet DA and SA */
-+ memmove(skb->data - ETH_HLEN,
-+ skb->data - ETH_HLEN - BRCM_LEG_TAG_LEN,
-+ 2 * ETH_ALEN);
-+
-+ return skb;
-+}
-+
-+static const struct dsa_device_ops brcm_legacy_netdev_ops = {
-+ .name = "brcm-legacy",
-+ .proto = DSA_TAG_PROTO_BRCM_LEGACY,
-+ .xmit = brcm_leg_tag_xmit,
-+ .rcv = brcm_leg_tag_rcv,
-+ .overhead = BRCM_LEG_TAG_LEN,
-+};
-+
-+DSA_TAG_DRIVER(brcm_legacy_netdev_ops);
-+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY);
-+#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */
-+
- #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
- static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb,
- struct net_device *dev)
-@@ -226,6 +324,9 @@ static struct dsa_tag_driver *dsa_tag_dr
- #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM)
- &DSA_TAG_DRIVER_NAME(brcm_netdev_ops),
- #endif
-+#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
-+ &DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops),
-+#endif
- #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
- &DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops),
- #endif
+++ /dev/null
-From 46c5176c586c81306bf9e7024c13b95da775490f Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 11:29:27 +0100
-Subject: [PATCH 2/2] net: dsa: b53: support legacy tags
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-These tags are used on BCM5325, BCM5365 and BCM63xx switches.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Acked-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/Kconfig | 1 +
- drivers/net/dsa/b53/b53_common.c | 12 +++++++-----
- 2 files changed, 8 insertions(+), 5 deletions(-)
-
---- a/drivers/net/dsa/b53/Kconfig
-+++ b/drivers/net/dsa/b53/Kconfig
-@@ -3,6 +3,7 @@ menuconfig B53
- tristate "Broadcom BCM53xx managed switch support"
- depends on NET_DSA
- select NET_DSA_TAG_BRCM
-+ select NET_DSA_TAG_BRCM_LEGACY
- select NET_DSA_TAG_BRCM_PREPEND
- help
- This driver adds support for Broadcom managed switch chips. It supports
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2021,15 +2021,17 @@ enum dsa_tag_protocol b53_get_tag_protoc
- {
- struct b53_device *dev = ds->priv;
-
-- /* Older models (5325, 5365) support a different tag format that we do
-- * not support in net/dsa/tag_brcm.c yet.
-- */
-- if (is5325(dev) || is5365(dev) ||
-- !b53_can_enable_brcm_tags(ds, port, mprot)) {
-+ if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
- dev->tag_protocol = DSA_TAG_PROTO_NONE;
- goto out;
- }
-
-+ /* Older models require a different 6 byte tag */
-+ if (is5325(dev) || is5365(dev) || is63xx(dev)) {
-+ dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
-+ goto out;
-+ }
-+
- /* Broadcom BCM58xx chips have a flow accelerator on Port 8
- * which requires us to use the prepended Broadcom tag type
- */
+++ /dev/null
-From a5538a777b73b35750ed1ffff8c1ef539e861624 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
-Date: Wed, 17 Mar 2021 10:23:17 +0100
-Subject: [PATCH] net: dsa: b53: mmap: Add device tree support
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Add device tree support to b53_mmap.c while keeping platform devices support.
-
-Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_mmap.c | 55 ++++++++++++++++++++++++++++++++++
- 1 file changed, 55 insertions(+)
-
---- a/drivers/net/dsa/b53/b53_mmap.c
-+++ b/drivers/net/dsa/b53/b53_mmap.c
-@@ -16,6 +16,7 @@
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-+#include <linux/bits.h>
- #include <linux/kernel.h>
- #include <linux/module.h>
- #include <linux/io.h>
-@@ -228,11 +229,65 @@ static const struct b53_io_ops b53_mmap_
- .write64 = b53_mmap_write64,
- };
-
-+static int b53_mmap_probe_of(struct platform_device *pdev,
-+ struct b53_platform_data **ppdata)
-+{
-+ struct device_node *np = pdev->dev.of_node;
-+ struct device_node *of_ports, *of_port;
-+ struct device *dev = &pdev->dev;
-+ struct b53_platform_data *pdata;
-+ void __iomem *mem;
-+
-+ mem = devm_platform_ioremap_resource(pdev, 0);
-+ if (IS_ERR(mem))
-+ return PTR_ERR(mem);
-+
-+ pdata = devm_kzalloc(dev, sizeof(struct b53_platform_data),
-+ GFP_KERNEL);
-+ if (!pdata)
-+ return -ENOMEM;
-+
-+ pdata->regs = mem;
-+ pdata->chip_id = BCM63XX_DEVICE_ID;
-+ pdata->big_endian = of_property_read_bool(np, "big-endian");
-+
-+ of_ports = of_get_child_by_name(np, "ports");
-+ if (!of_ports) {
-+ dev_err(dev, "no ports child node found\n");
-+ return -EINVAL;
-+ }
-+
-+ for_each_available_child_of_node(of_ports, of_port) {
-+ u32 reg;
-+
-+ if (of_property_read_u32(of_port, "reg", ®))
-+ continue;
-+
-+ if (reg < B53_CPU_PORT)
-+ pdata->enabled_ports |= BIT(reg);
-+ }
-+
-+ of_node_put(of_ports);
-+ *ppdata = pdata;
-+
-+ return 0;
-+}
-+
- static int b53_mmap_probe(struct platform_device *pdev)
- {
-+ struct device_node *np = pdev->dev.of_node;
- struct b53_platform_data *pdata = pdev->dev.platform_data;
- struct b53_mmap_priv *priv;
- struct b53_device *dev;
-+ int ret;
-+
-+ if (!pdata && np) {
-+ ret = b53_mmap_probe_of(pdev, &pdata);
-+ if (ret) {
-+ dev_err(&pdev->dev, "OF probe error\n");
-+ return ret;
-+ }
-+ }
-
- if (!pdata)
- return -EINVAL;
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -1148,6 +1148,36 @@ static void b53_force_port_config(struct
+@@ -1174,6 +1174,36 @@ static void b53_force_port_config(struct
b53_write8(dev, B53_CTRL_PAGE, off, reg);
}
static void b53_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev)
{
-@@ -1174,6 +1204,9 @@ static void b53_adjust_link(struct dsa_s
+@@ -1200,6 +1230,9 @@ static void b53_adjust_link(struct dsa_s
tx_pause, rx_pause);
b53_force_link(dev, port, phydev->link);
+ b53_adjust_63xx_rgmii(ds, port, phydev->interface);
+
if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
- if (port == 8)
+ if (port == dev->imp_port)
off = B53_RGMII_CTRL_IMP;
-@@ -1366,6 +1399,9 @@ void b53_phylink_mac_link_up(struct dsa_
+@@ -1386,6 +1419,9 @@ void b53_phylink_mac_link_up(struct dsa_
{
struct b53_device *dev = ds->priv;
--- /dev/null
+From ee47ed08d75e8f16b3cf882061ee19c2ea19dd6c Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Wed, 10 Mar 2021 10:52:26 -0800
+Subject: [PATCH] net: dsa: b53: Add debug prints in b53_vlan_enable()
+
+Having dynamic debug prints in b53_vlan_enable() has been helpful to
+uncover a recent but update the function to indicate the port being
+configured (or -1 for initial setup) and include the global VLAN enabled
+and VLAN filtering enable status.
+
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Reviewed-by: Andrew Lunn <andrew@lunn.ch>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 11 +++++++----
+ 1 file changed, 7 insertions(+), 4 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -349,7 +349,7 @@ static void b53_set_forwarding(struct b5
+ b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
+ }
+
+-static void b53_enable_vlan(struct b53_device *dev, bool enable,
++static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
+ bool enable_filtering)
+ {
+ u8 mgmt, vc0, vc1, vc4 = 0, vc5;
+@@ -431,6 +431,9 @@ static void b53_enable_vlan(struct b53_d
+ b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
+
+ dev->vlan_enabled = enable;
++
++ dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
++ port, enable, enable_filtering);
+ }
+
+ static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
+@@ -708,7 +711,7 @@ int b53_configure_vlan(struct dsa_switch
+ b53_do_vlan_op(dev, VTA_CMD_CLEAR);
+ }
+
+- b53_enable_vlan(dev, dev->vlan_enabled, ds->vlan_filtering);
++ b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
+
+ b53_for_each_port(dev, i)
+ b53_write16(dev, B53_VLAN_PAGE,
+@@ -1390,7 +1393,7 @@ int b53_vlan_filtering(struct dsa_switch
+ if (switchdev_trans_ph_prepare(trans))
+ return 0;
+
+- b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
++ b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
+
+ return 0;
+ }
+@@ -1415,7 +1418,7 @@ int b53_vlan_prepare(struct dsa_switch *
+ if (vlan->vid_end >= dev->num_vlans)
+ return -ERANGE;
+
+- b53_enable_vlan(dev, true, ds->vlan_filtering);
++ b53_enable_vlan(dev, port, true, ds->vlan_filtering);
+
+ return 0;
+ }
--- /dev/null
+From 6d16eadab6db0c1d61e59fee7ed1ecc2d10269be Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Mon, 15 Mar 2021 15:14:23 +0100
+Subject: [PATCH] net: dsa: b53: spi: allow device tree probing
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add missing of_match_table to allow device tree probing.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_spi.c | 13 +++++++++++++
+ 1 file changed, 13 insertions(+)
+
+--- a/drivers/net/dsa/b53/b53_spi.c
++++ b/drivers/net/dsa/b53/b53_spi.c
+@@ -324,9 +324,22 @@ static int b53_spi_remove(struct spi_dev
+ return 0;
+ }
+
++static const struct of_device_id b53_spi_of_match[] = {
++ { .compatible = "brcm,bcm5325" },
++ { .compatible = "brcm,bcm5365" },
++ { .compatible = "brcm,bcm5395" },
++ { .compatible = "brcm,bcm5397" },
++ { .compatible = "brcm,bcm5398" },
++ { .compatible = "brcm,bcm53115" },
++ { .compatible = "brcm,bcm53125" },
++ { .compatible = "brcm,bcm53128" },
++ { /* sentinel */ }
++};
++
+ static struct spi_driver b53_spi_driver = {
+ .driver = {
+ .name = "b53-switch",
++ .of_match_table = b53_spi_of_match,
+ },
+ .probe = b53_spi_probe,
+ .remove = b53_spi_remove,
--- /dev/null
+From ad426d7d966b525b73ed5a1842dd830312bbba71 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Wed, 17 Mar 2021 09:42:01 +0100
+Subject: [PATCH] net: dsa: b53: relax is63xx() condition
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+BCM63xx switches are present on bcm63xx and bmips devices.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_priv.h | 4 ----
+ 1 file changed, 4 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_priv.h
++++ b/drivers/net/dsa/b53/b53_priv.h
+@@ -185,11 +185,7 @@ static inline int is531x5(struct b53_dev
+
+ static inline int is63xx(struct b53_device *dev)
+ {
+-#ifdef CONFIG_BCM63XX
+ return dev->chip_id == BCM63XX_DEVICE_ID;
+-#else
+- return 0;
+-#endif
+ }
+
+ static inline int is5301x(struct b53_device *dev)
--- /dev/null
+From 964dbf186eaa84d409c359ddf09c827a3fbe8228 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Wed, 17 Mar 2021 11:29:26 +0100
+Subject: [PATCH] net: dsa: tag_brcm: add support for legacy tags
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add support for legacy Broadcom tags, which are similar to DSA_TAG_PROTO_BRCM.
+These tags are used on BCM5325, BCM5365 and BCM63xx switches.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ include/net/dsa.h | 2 +
+ net/dsa/Kconfig | 7 +++
+ net/dsa/tag_brcm.c | 107 +++++++++++++++++++++++++++++++++++++++++++--
+ 3 files changed, 113 insertions(+), 3 deletions(-)
+
+--- a/include/net/dsa.h
++++ b/include/net/dsa.h
+@@ -45,10 +45,12 @@ struct phylink_link_state;
+ #define DSA_TAG_PROTO_OCELOT_VALUE 15
+ #define DSA_TAG_PROTO_AR9331_VALUE 16
+ #define DSA_TAG_PROTO_RTL4_A_VALUE 17
++#define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22
+
+ enum dsa_tag_protocol {
+ DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE,
+ DSA_TAG_PROTO_BRCM = DSA_TAG_PROTO_BRCM_VALUE,
++ DSA_TAG_PROTO_BRCM_LEGACY = DSA_TAG_PROTO_BRCM_LEGACY_VALUE,
+ DSA_TAG_PROTO_BRCM_PREPEND = DSA_TAG_PROTO_BRCM_PREPEND_VALUE,
+ DSA_TAG_PROTO_DSA = DSA_TAG_PROTO_DSA_VALUE,
+ DSA_TAG_PROTO_EDSA = DSA_TAG_PROTO_EDSA_VALUE,
+--- a/net/dsa/Kconfig
++++ b/net/dsa/Kconfig
+@@ -47,6 +47,13 @@ config NET_DSA_TAG_BRCM
+ Say Y if you want to enable support for tagging frames for the
+ Broadcom switches which place the tag after the MAC source address.
+
++config NET_DSA_TAG_BRCM_LEGACY
++ tristate "Tag driver for Broadcom legacy switches using in-frame headers"
++ select NET_DSA_TAG_BRCM_COMMON
++ help
++ Say Y if you want to enable support for tagging frames for the
++ Broadcom legacy switches which place the tag after the MAC source
++ address.
+
+ config NET_DSA_TAG_BRCM_PREPEND
+ tristate "Tag driver for Broadcom switches using prepended headers"
+--- a/net/dsa/tag_brcm.c
++++ b/net/dsa/tag_brcm.c
+@@ -11,9 +11,26 @@
+
+ #include "dsa_priv.h"
+
+-/* This tag length is 4 bytes, older ones were 6 bytes, we do not
+- * handle them
+- */
++/* Legacy Broadcom tag (6 bytes) */
++#define BRCM_LEG_TAG_LEN 6
++
++/* Type fields */
++/* 1st byte in the tag */
++#define BRCM_LEG_TYPE_HI 0x88
++/* 2nd byte in the tag */
++#define BRCM_LEG_TYPE_LO 0x74
++
++/* Tag fields */
++/* 3rd byte in the tag */
++#define BRCM_LEG_UNICAST (0 << 5)
++#define BRCM_LEG_MULTICAST (1 << 5)
++#define BRCM_LEG_EGRESS (2 << 5)
++#define BRCM_LEG_INGRESS (3 << 5)
++
++/* 6th byte in the tag */
++#define BRCM_LEG_PORT_ID (0xf)
++
++/* Newer Broadcom tag (4 bytes) */
+ #define BRCM_TAG_LEN 4
+
+ /* Tag is constructed and desconstructed using byte by byte access
+@@ -194,6 +211,87 @@ DSA_TAG_DRIVER(brcm_netdev_ops);
+ MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM);
+ #endif
+
++#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
++static struct sk_buff *brcm_leg_tag_xmit(struct sk_buff *skb,
++ struct net_device *dev)
++{
++ struct dsa_port *dp = dsa_slave_to_port(dev);
++ u8 *brcm_tag;
++
++ /* The Ethernet switch we are interfaced with needs packets to be at
++ * least 64 bytes (including FCS) otherwise they will be discarded when
++ * they enter the switch port logic. When Broadcom tags are enabled, we
++ * need to make sure that packets are at least 70 bytes
++ * (including FCS and tag) because the length verification is done after
++ * the Broadcom tag is stripped off the ingress packet.
++ *
++ * Let dsa_slave_xmit() free the SKB
++ */
++ if (__skb_put_padto(skb, ETH_ZLEN + BRCM_LEG_TAG_LEN, false))
++ return NULL;
++
++ skb_push(skb, BRCM_LEG_TAG_LEN);
++
++ memmove(skb->data, skb->data + BRCM_LEG_TAG_LEN, 2 * ETH_ALEN);
++
++ brcm_tag = skb->data + 2 * ETH_ALEN;
++
++ /* Broadcom tag type */
++ brcm_tag[0] = BRCM_LEG_TYPE_HI;
++ brcm_tag[1] = BRCM_LEG_TYPE_LO;
++
++ /* Broadcom tag value */
++ brcm_tag[2] = BRCM_LEG_EGRESS;
++ brcm_tag[3] = 0;
++ brcm_tag[4] = 0;
++ brcm_tag[5] = dp->index & BRCM_LEG_PORT_ID;
++
++ return skb;
++}
++
++static struct sk_buff *brcm_leg_tag_rcv(struct sk_buff *skb,
++ struct net_device *dev,
++ struct packet_type *pt)
++{
++ int source_port;
++ u8 *brcm_tag;
++
++ if (unlikely(!pskb_may_pull(skb, BRCM_LEG_PORT_ID)))
++ return NULL;
++
++ brcm_tag = skb->data - 2;
++
++ source_port = brcm_tag[5] & BRCM_LEG_PORT_ID;
++
++ skb->dev = dsa_master_find_slave(dev, 0, source_port);
++ if (!skb->dev)
++ return NULL;
++
++ /* Remove Broadcom tag and update checksum */
++ skb_pull_rcsum(skb, BRCM_LEG_TAG_LEN);
++
++ skb->offload_fwd_mark = 1;
++
++ /* Move the Ethernet DA and SA */
++ memmove(skb->data - ETH_HLEN,
++ skb->data - ETH_HLEN - BRCM_LEG_TAG_LEN,
++ 2 * ETH_ALEN);
++
++ return skb;
++}
++
++static const struct dsa_device_ops brcm_legacy_netdev_ops = {
++ .name = "brcm-legacy",
++ .proto = DSA_TAG_PROTO_BRCM_LEGACY,
++ .xmit = brcm_leg_tag_xmit,
++ .rcv = brcm_leg_tag_rcv,
++ .overhead = BRCM_LEG_TAG_LEN,
++};
++
++DSA_TAG_DRIVER(brcm_legacy_netdev_ops);
++MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_BRCM_LEGACY);
++#endif /* CONFIG_NET_DSA_TAG_BRCM_LEGACY */
++
+ #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
+ static struct sk_buff *brcm_tag_xmit_prepend(struct sk_buff *skb,
+ struct net_device *dev)
+@@ -226,6 +324,9 @@ static struct dsa_tag_driver *dsa_tag_dr
+ #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM)
+ &DSA_TAG_DRIVER_NAME(brcm_netdev_ops),
+ #endif
++#if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_LEGACY)
++ &DSA_TAG_DRIVER_NAME(brcm_legacy_netdev_ops),
++#endif
+ #if IS_ENABLED(CONFIG_NET_DSA_TAG_BRCM_PREPEND)
+ &DSA_TAG_DRIVER_NAME(brcm_prepend_netdev_ops),
+ #endif
--- /dev/null
+From 46c5176c586c81306bf9e7024c13b95da775490f Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Wed, 17 Mar 2021 11:29:27 +0100
+Subject: [PATCH] net: dsa: b53: support legacy tags
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+These tags are used on BCM5325, BCM5365 and BCM63xx switches.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/Kconfig | 1 +
+ drivers/net/dsa/b53/b53_common.c | 12 +++++++-----
+ 2 files changed, 8 insertions(+), 5 deletions(-)
+
+--- a/drivers/net/dsa/b53/Kconfig
++++ b/drivers/net/dsa/b53/Kconfig
+@@ -3,6 +3,7 @@ menuconfig B53
+ tristate "Broadcom BCM53xx managed switch support"
+ depends on NET_DSA
+ select NET_DSA_TAG_BRCM
++ select NET_DSA_TAG_BRCM_LEGACY
+ select NET_DSA_TAG_BRCM_PREPEND
+ help
+ This driver adds support for Broadcom managed switch chips. It supports
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -2024,15 +2024,17 @@ enum dsa_tag_protocol b53_get_tag_protoc
+ {
+ struct b53_device *dev = ds->priv;
+
+- /* Older models (5325, 5365) support a different tag format that we do
+- * not support in net/dsa/tag_brcm.c yet.
+- */
+- if (is5325(dev) || is5365(dev) ||
+- !b53_can_enable_brcm_tags(ds, port, mprot)) {
++ if (!b53_can_enable_brcm_tags(ds, port, mprot)) {
+ dev->tag_protocol = DSA_TAG_PROTO_NONE;
+ goto out;
+ }
+
++ /* Older models require a different 6 byte tag */
++ if (is5325(dev) || is5365(dev) || is63xx(dev)) {
++ dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY;
++ goto out;
++ }
++
+ /* Broadcom BCM58xx chips have a flow accelerator on Port 8
+ * which requires us to use the prepended Broadcom tag type
+ */
--- /dev/null
+From a5538a777b73b35750ed1ffff8c1ef539e861624 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= <noltari@gmail.com>
+Date: Wed, 17 Mar 2021 10:23:17 +0100
+Subject: [PATCH] net: dsa: b53: mmap: Add device tree support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add device tree support to b53_mmap.c while keeping platform devices support.
+
+Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_mmap.c | 55 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 55 insertions(+)
+
+--- a/drivers/net/dsa/b53/b53_mmap.c
++++ b/drivers/net/dsa/b53/b53_mmap.c
+@@ -16,6 +16,7 @@
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
++#include <linux/bits.h>
+ #include <linux/kernel.h>
+ #include <linux/module.h>
+ #include <linux/io.h>
+@@ -228,11 +229,65 @@ static const struct b53_io_ops b53_mmap_
+ .write64 = b53_mmap_write64,
+ };
+
++static int b53_mmap_probe_of(struct platform_device *pdev,
++ struct b53_platform_data **ppdata)
++{
++ struct device_node *np = pdev->dev.of_node;
++ struct device_node *of_ports, *of_port;
++ struct device *dev = &pdev->dev;
++ struct b53_platform_data *pdata;
++ void __iomem *mem;
++
++ mem = devm_platform_ioremap_resource(pdev, 0);
++ if (IS_ERR(mem))
++ return PTR_ERR(mem);
++
++ pdata = devm_kzalloc(dev, sizeof(struct b53_platform_data),
++ GFP_KERNEL);
++ if (!pdata)
++ return -ENOMEM;
++
++ pdata->regs = mem;
++ pdata->chip_id = BCM63XX_DEVICE_ID;
++ pdata->big_endian = of_property_read_bool(np, "big-endian");
++
++ of_ports = of_get_child_by_name(np, "ports");
++ if (!of_ports) {
++ dev_err(dev, "no ports child node found\n");
++ return -EINVAL;
++ }
++
++ for_each_available_child_of_node(of_ports, of_port) {
++ u32 reg;
++
++ if (of_property_read_u32(of_port, "reg", ®))
++ continue;
++
++ if (reg < B53_CPU_PORT)
++ pdata->enabled_ports |= BIT(reg);
++ }
++
++ of_node_put(of_ports);
++ *ppdata = pdata;
++
++ return 0;
++}
++
+ static int b53_mmap_probe(struct platform_device *pdev)
+ {
++ struct device_node *np = pdev->dev.of_node;
+ struct b53_platform_data *pdata = pdev->dev.platform_data;
+ struct b53_mmap_priv *priv;
+ struct b53_device *dev;
++ int ret;
++
++ if (!pdata && np) {
++ ret = b53_mmap_probe_of(pdev, &pdata);
++ if (ret) {
++ dev_err(&pdev->dev, "OF probe error\n");
++ return ret;
++ }
++ }
+
+ if (!pdata)
+ return -EINVAL;
--- /dev/null
+From 866f1577ba69bde2b9f36c300f603596c7d84a62 Mon Sep 17 00:00:00 2001
+From: Qinglang Miao <miaoqinglang@huawei.com>
+Date: Thu, 25 Mar 2021 17:19:54 +0800
+Subject: [PATCH] net: dsa: b53: spi: add missing MODULE_DEVICE_TABLE
+
+This patch adds missing MODULE_DEVICE_TABLE definition which generates
+correct modalias for automatic loading of this driver when it is built
+as an external module.
+
+Reported-by: Hulk Robot <hulkci@huawei.com>
+Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_spi.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/drivers/net/dsa/b53/b53_spi.c
++++ b/drivers/net/dsa/b53/b53_spi.c
+@@ -335,6 +335,7 @@ static const struct of_device_id b53_spi
+ { .compatible = "brcm,bcm53128" },
+ { /* sentinel */ }
+ };
++MODULE_DEVICE_TABLE(of, b53_spi_of_match);
+
+ static struct spi_driver b53_spi_driver = {
+ .driver = {
+++ /dev/null
-From cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 2 Sep 2021 10:30:50 +0200
-Subject: [PATCH] net: dsa: b53: Fix calculating number of switch ports
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-It isn't true that CPU port is always the last one. Switches BCM5301x
-have 9 ports (port 6 being inactive) and they use port 5 as CPU by
-default (depending on design some other may be CPU ports too).
-
-A more reliable way of determining number of ports is to check for the
-last set bit in the "enabled_ports" bitfield.
-
-This fixes b53 internal state, it will allow providing accurate info to
-the DSA and is required to fix BCM5301x support.
-
-Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_common.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2556,9 +2556,8 @@ static int b53_switch_init(struct b53_de
- dev->cpu_port = 5;
- }
-
-- /* cpu port is always last */
-- dev->num_ports = dev->cpu_port + 1;
- dev->enabled_ports |= BIT(dev->cpu_port);
-+ dev->num_ports = fls(dev->enabled_ports);
-
- /* Include non standard CPU port built-in PHYs to be probed */
- if (is539x(dev) || is531x5(dev)) {
+++ /dev/null
-From d12e1c4649883e8ca5e8ff341e1948b3b6313259 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
-Date: Thu, 2 Sep 2021 10:30:51 +0200
-Subject: [PATCH] net: dsa: b53: Set correct number of ports in the DSA struct
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Setting DSA_MAX_PORTS caused DSA to call b53 callbacks (e.g.
-b53_disable_port() during dsa_register_switch()) for invalid
-(non-existent) ports. That made b53 modify unrelated registers and is
-one of reasons for a broken BCM5301x support.
-
-This problem exists for years but DSA_MAX_PORTS usage has changed few
-times. It seems the most accurate to reference commit dropping
-dsa_switch_alloc() in the Fixes tag.
-
-Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper")
-Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
-Signed-off-by: David S. Miller <davem@davemloft.net>
----
- drivers/net/dsa/b53/b53_common.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/net/dsa/b53/b53_common.c
-+++ b/drivers/net/dsa/b53/b53_common.c
-@@ -2559,6 +2559,8 @@ static int b53_switch_init(struct b53_de
- dev->enabled_ports |= BIT(dev->cpu_port);
- dev->num_ports = fls(dev->enabled_ports);
-
-+ dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
-+
- /* Include non standard CPU port built-in PHYs to be probed */
- if (is539x(dev) || is531x5(dev)) {
- for (i = 0; i < dev->num_ports; i++) {
-@@ -2603,7 +2605,6 @@ struct b53_device *b53_switch_alloc(stru
- return NULL;
-
- ds->dev = base;
-- ds->num_ports = DSA_MAX_PORTS;
-
- dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
- if (!dev)
--- /dev/null
+From 2c32a3d3c233b855943677609fe388f82b1f0975 Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Tue, 8 Jun 2021 14:22:04 -0700
+Subject: [PATCH] net: dsa: b53: Do not force CPU to be always tagged
+
+Commit ca8931948344 ("net: dsa: b53: Keep CPU port as tagged in all
+VLANs") forced the CPU port to be always tagged in any VLAN membership.
+This was necessary back then because we did not support Broadcom tags
+for all configurations so the only way to differentiate tagged and
+untagged traffic while DSA_TAG_PROTO_NONE was used was to force the CPU
+port into being always tagged.
+
+With most configurations enabling Broadcom tags, especially after
+8fab459e69ab ("net: dsa: b53: Enable Broadcom tags for 531x5/539x
+families") we do not need to apply this unconditional force tagging of
+the CPU port in all VLANs.
+
+A helper function is introduced to faciliate the encapsulation of the
+specific condition requiring the CPU port to be tagged in all VLANs and
+the dsa_switch_ops::untag_bridge_pvid boolean is moved to when
+dsa_switch_ops::setup is called when we have already determined the
+tagging protocol we will be using.
+
+Reported-by: Matthew Hagan <mnhagan88@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Tested-by: Matthew Hagan <mnhagan88@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 17 ++++++++++++++---
+ 1 file changed, 14 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1049,6 +1049,11 @@ static int b53_setup(struct dsa_switch *
+ unsigned int port;
+ int ret;
+
++ /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set
++ * which forces the CPU port to be tagged in all VLANs.
++ */
++ ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE;
++
+ ret = b53_reset_switch(dev);
+ if (ret) {
+ dev_err(ds->dev, "failed to reset switch\n");
+@@ -1423,6 +1428,13 @@ int b53_vlan_prepare(struct dsa_switch *
+ return 0;
+ }
+ EXPORT_SYMBOL(b53_vlan_prepare);
++
++static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
++{
++ struct b53_device *dev = ds->priv;
++
++ return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
++}
+
+ void b53_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+@@ -1442,7 +1454,7 @@ void b53_vlan_add(struct dsa_switch *ds,
+ untagged = true;
+
+ vl->members |= BIT(port);
+- if (untagged && !dsa_is_cpu_port(ds, port))
++ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
+ vl->untag |= BIT(port);
+ else
+ vl->untag &= ~BIT(port);
+@@ -1480,7 +1492,7 @@ int b53_vlan_del(struct dsa_switch *ds,
+ if (pvid == vid)
+ pvid = b53_default_pvid(dev);
+
+- if (untagged && !dsa_is_cpu_port(ds, port))
++ if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port))
+ vl->untag &= ~(BIT(port));
+
+ b53_set_vlan_entry(dev, vid, vl);
+@@ -2623,7 +2635,6 @@ struct b53_device *b53_switch_alloc(stru
+ dev->ops = ops;
+ ds->ops = &b53_switch_ops;
+ ds->configure_vlan_while_not_filtering = true;
+- ds->untag_bridge_pvid = true;
+ dev->vlan_enabled = ds->configure_vlan_while_not_filtering;
+ /* Let DSA handle the case were multiple bridges span the same switch
+ * device and different VLAN awareness settings are requested, which
--- /dev/null
+From 11b57faf951cd3a570e3d9e463fc7c41023bc8c6 Mon Sep 17 00:00:00 2001
+From: Colin Ian King <colin.king@canonical.com>
+Date: Tue, 15 Jun 2021 10:05:16 +0100
+Subject: [PATCH] net: dsa: b53: remove redundant null check on dev
+
+The pointer dev can never be null, the null check is redundant
+and can be removed. Cleans up a static analysis warning that
+pointer priv is dereferencing dev before dev is being null
+checked.
+
+Addresses-Coverity: ("Dereference before null check")
+Signed-off-by: Colin Ian King <colin.king@canonical.com>
+Acked-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_srab.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_srab.c
++++ b/drivers/net/dsa/b53/b53_srab.c
+@@ -632,8 +632,7 @@ static int b53_srab_remove(struct platfo
+ struct b53_srab_priv *priv = dev->priv;
+
+ b53_srab_intr_set(priv, false);
+- if (dev)
+- b53_switch_remove(dev);
++ b53_switch_remove(dev);
+
+ return 0;
+ }
--- /dev/null
+From 64a81b24487f0d2fba0f033029eec2abc7d82cee Mon Sep 17 00:00:00 2001
+From: Florian Fainelli <f.fainelli@gmail.com>
+Date: Mon, 21 Jun 2021 15:10:55 -0700
+Subject: [PATCH] net: dsa: b53: Create default VLAN entry explicitly
+
+In case CONFIG_VLAN_8021Q is not set, there will be no call down to the
+b53 driver to ensure that the default PVID VLAN entry will be configured
+with the appropriate untagged attribute towards the CPU port. We were
+implicitly relying on dsa_slave_vlan_rx_add_vid() to do that for us,
+instead make it explicit.
+
+Reported-by: Vladimir Oltean <olteanv@gmail.com>
+Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 27 +++++++++++++++++++--------
+ 1 file changed, 19 insertions(+), 8 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -693,6 +693,13 @@ static u16 b53_default_pvid(struct b53_d
+ return 0;
+ }
+
++static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
++{
++ struct b53_device *dev = ds->priv;
++
++ return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
++}
++
+ int b53_configure_vlan(struct dsa_switch *ds)
+ {
+ struct b53_device *dev = ds->priv;
+@@ -713,9 +720,20 @@ int b53_configure_vlan(struct dsa_switch
+
+ b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
+
+- b53_for_each_port(dev, i)
++ /* Create an untagged VLAN entry for the default PVID in case
++ * CONFIG_VLAN_8021Q is disabled and there are no calls to
++ * dsa_slave_vlan_rx_add_vid() to create the default VLAN
++ * entry. Do this only when the tagging protocol is not
++ * DSA_TAG_PROTO_NONE
++ */
++ b53_for_each_port(dev, i) {
++ v = &dev->vlans[def_vid];
++ v->members |= BIT(i);
++ if (!b53_vlan_port_needs_forced_tagged(ds, i))
++ v->untag = v->members;
+ b53_write16(dev, B53_VLAN_PAGE,
+ B53_VLAN_PORT_DEF_TAG(i), def_vid);
++ }
+
+ /* Upon initial call we have not set-up any VLANs, but upon
+ * system resume, we need to restore all VLAN entries.
+@@ -1429,13 +1447,6 @@ int b53_vlan_prepare(struct dsa_switch *
+ }
+ EXPORT_SYMBOL(b53_vlan_prepare);
+
+-static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port)
+-{
+- struct b53_device *dev = ds->priv;
+-
+- return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port);
+-}
+-
+ void b53_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan)
+ {
--- /dev/null
+From cdb067d31c0fe4cce98b9d15f1f2ef525acaa094 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 2 Sep 2021 10:30:50 +0200
+Subject: [PATCH] net: dsa: b53: Fix calculating number of switch ports
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It isn't true that CPU port is always the last one. Switches BCM5301x
+have 9 ports (port 6 being inactive) and they use port 5 as CPU by
+default (depending on design some other may be CPU ports too).
+
+A more reliable way of determining number of ports is to check for the
+last set bit in the "enabled_ports" bitfield.
+
+This fixes b53 internal state, it will allow providing accurate info to
+the DSA and is required to fix BCM5301x support.
+
+Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 3 +--
+ 1 file changed, 1 insertion(+), 2 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -2584,9 +2584,8 @@ static int b53_switch_init(struct b53_de
+ dev->cpu_port = 5;
+ }
+
+- /* cpu port is always last */
+- dev->num_ports = dev->cpu_port + 1;
+ dev->enabled_ports |= BIT(dev->cpu_port);
++ dev->num_ports = fls(dev->enabled_ports);
+
+ /* Include non standard CPU port built-in PHYs to be probed */
+ if (is539x(dev) || is531x5(dev)) {
--- /dev/null
+From d12e1c4649883e8ca5e8ff341e1948b3b6313259 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 2 Sep 2021 10:30:51 +0200
+Subject: [PATCH] net: dsa: b53: Set correct number of ports in the DSA struct
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Setting DSA_MAX_PORTS caused DSA to call b53 callbacks (e.g.
+b53_disable_port() during dsa_register_switch()) for invalid
+(non-existent) ports. That made b53 modify unrelated registers and is
+one of reasons for a broken BCM5301x support.
+
+This problem exists for years but DSA_MAX_PORTS usage has changed few
+times. It seems the most accurate to reference commit dropping
+dsa_switch_alloc() in the Fixes tag.
+
+Fixes: 7e99e3470172 ("net: dsa: remove dsa_switch_alloc helper")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -2587,6 +2587,8 @@ static int b53_switch_init(struct b53_de
+ dev->enabled_ports |= BIT(dev->cpu_port);
+ dev->num_ports = fls(dev->enabled_ports);
+
++ dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
++
+ /* Include non standard CPU port built-in PHYs to be probed */
+ if (is539x(dev) || is531x5(dev)) {
+ for (i = 0; i < dev->num_ports; i++) {
+@@ -2631,7 +2633,6 @@ struct b53_device *b53_switch_alloc(stru
+ return NULL;
+
+ ds->dev = base;
+- ds->num_ports = DSA_MAX_PORTS;
+
+ dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
--- /dev/null
+From 63f8428b4077de3664eb0b252393c839b0b293ec Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Sun, 5 Sep 2021 19:23:28 +0200
+Subject: [PATCH] net: dsa: b53: Fix IMP port setup on BCM5301x
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Broadcom's b53 switches have one IMP (Inband Management Port) that needs
+to be programmed using its own designed register. IMP port may be
+different than CPU port - especially on devices with multiple CPU ports.
+
+For that reason it's required to explicitly note IMP port index and
+check for it when choosing a register to use.
+
+This commit fixes BCM5301x support. Those switches use CPU port 5 while
+their IMP port is 8. Before this patch b53 was trying to program port 5
+with B53_PORT_OVERRIDE_CTRL instead of B53_GMII_PORT_OVERRIDE_CTRL(5).
+
+It may be possible to also replace "cpu_port" usages with
+dsa_is_cpu_port() but that is out of the scope of thix BCM5301x fix.
+
+Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/b53/b53_common.c | 28 +++++++++++++++++++++++++---
+ drivers/net/dsa/b53/b53_priv.h | 1 +
+ 2 files changed, 26 insertions(+), 3 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1109,7 +1109,7 @@ static void b53_force_link(struct b53_de
+ u8 reg, val, off;
+
+ /* Override the port settings */
+- if (port == dev->cpu_port) {
++ if (port == dev->imp_port) {
+ off = B53_PORT_OVERRIDE_CTRL;
+ val = PORT_OVERRIDE_EN;
+ } else {
+@@ -1133,7 +1133,7 @@ static void b53_force_port_config(struct
+ u8 reg, val, off;
+
+ /* Override the port settings */
+- if (port == dev->cpu_port) {
++ if (port == dev->imp_port) {
+ off = B53_PORT_OVERRIDE_CTRL;
+ val = PORT_OVERRIDE_EN;
+ } else {
+@@ -1201,7 +1201,7 @@ static void b53_adjust_link(struct dsa_s
+ b53_force_link(dev, port, phydev->link);
+
+ if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
+- if (port == 8)
++ if (port == dev->imp_port)
+ off = B53_RGMII_CTRL_IMP;
+ else
+ off = B53_RGMII_CTRL_P(port);
+@@ -2266,6 +2266,7 @@ struct b53_chip_data {
+ const char *dev_name;
+ u16 vlans;
+ u16 enabled_ports;
++ u8 imp_port;
+ u8 cpu_port;
+ u8 vta_regs[3];
+ u8 arl_bins;
+@@ -2290,6 +2291,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 2,
+ .arl_buckets = 1024,
++ .imp_port = 5,
+ .cpu_port = B53_CPU_PORT_25,
+ .duplex_reg = B53_DUPLEX_STAT_FE,
+ },
+@@ -2300,6 +2302,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 2,
+ .arl_buckets = 1024,
++ .imp_port = 5,
+ .cpu_port = B53_CPU_PORT_25,
+ .duplex_reg = B53_DUPLEX_STAT_FE,
+ },
+@@ -2310,6 +2313,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2323,6 +2327,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2336,6 +2341,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS_9798,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2349,6 +2355,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x7f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS_9798,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2363,6 +2370,7 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .vta_regs = B53_VTA_REGS,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2375,6 +2383,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0xff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2388,6 +2397,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2401,6 +2411,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0, /* pdata must provide them */
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS_63XX,
+ .duplex_reg = B53_DUPLEX_STAT_63XX,
+@@ -2414,6 +2425,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2427,6 +2439,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2440,6 +2453,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2453,6 +2467,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2466,6 +2481,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2479,6 +2495,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2492,6 +2509,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x103,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2505,6 +2523,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2518,6 +2537,7 @@ static const struct b53_chip_data b53_sw
+ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 256,
++ .imp_port = 8,
+ .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+@@ -2543,6 +2563,7 @@ static int b53_switch_init(struct b53_de
+ dev->vta_regs[1] = chip->vta_regs[1];
+ dev->vta_regs[2] = chip->vta_regs[2];
+ dev->jumbo_pm_reg = chip->jumbo_pm_reg;
++ dev->imp_port = chip->imp_port;
+ dev->cpu_port = chip->cpu_port;
+ dev->num_vlans = chip->vlans;
+ dev->num_arl_bins = chip->arl_bins;
+--- a/drivers/net/dsa/b53/b53_priv.h
++++ b/drivers/net/dsa/b53/b53_priv.h
+@@ -122,6 +122,7 @@ struct b53_device {
+
+ /* used ports mask */
+ u16 enabled_ports;
++ unsigned int imp_port;
+ unsigned int cpu_port;
+
+ /* connect specific data */
--- /dev/null
+From 983d96a9116a328668601555d96736261d33170c Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 16 Sep 2021 14:03:51 +0200
+Subject: [PATCH] net: dsa: b53: Include all ports in "enabled_ports"
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Make "enabled_ports" bitfield contain all available switch ports
+including a CPU port. This way there is no need for fixup during
+initialization.
+
+For BCM53010, BCM53018 and BCM53019 include also other available ports.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Tested-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/dsa/b53/b53_common.c | 23 +++++++++++------------
+ 1 file changed, 11 insertions(+), 12 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -2288,7 +2288,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM5325_DEVICE_ID,
+ .dev_name = "BCM5325",
+ .vlans = 16,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x3f,
+ .arl_bins = 2,
+ .arl_buckets = 1024,
+ .imp_port = 5,
+@@ -2299,7 +2299,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM5365_DEVICE_ID,
+ .dev_name = "BCM5365",
+ .vlans = 256,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x3f,
+ .arl_bins = 2,
+ .arl_buckets = 1024,
+ .imp_port = 5,
+@@ -2310,7 +2310,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM5389_DEVICE_ID,
+ .dev_name = "BCM5389",
+ .vlans = 4096,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2324,7 +2324,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM5395_DEVICE_ID,
+ .dev_name = "BCM5395",
+ .vlans = 4096,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2338,7 +2338,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM5397_DEVICE_ID,
+ .dev_name = "BCM5397",
+ .vlans = 4096,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2352,7 +2352,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM5398_DEVICE_ID,
+ .dev_name = "BCM5398",
+ .vlans = 4096,
+- .enabled_ports = 0x7f,
++ .enabled_ports = 0x17f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2366,7 +2366,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM53115_DEVICE_ID,
+ .dev_name = "BCM53115",
+ .vlans = 4096,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x11f,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .vta_regs = B53_VTA_REGS,
+@@ -2380,7 +2380,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM53125_DEVICE_ID,
+ .dev_name = "BCM53125",
+ .vlans = 4096,
+- .enabled_ports = 0xff,
++ .enabled_ports = 0x1ff,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2422,7 +2422,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM53010_DEVICE_ID,
+ .dev_name = "BCM53010",
+ .vlans = 4096,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2464,7 +2464,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM53018_DEVICE_ID,
+ .dev_name = "BCM53018",
+ .vlans = 4096,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2478,7 +2478,7 @@ static const struct b53_chip_data b53_sw
+ .chip_id = BCM53019_DEVICE_ID,
+ .dev_name = "BCM53019",
+ .vlans = 4096,
+- .enabled_ports = 0x1f,
++ .enabled_ports = 0x1bf,
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+@@ -2605,7 +2605,6 @@ static int b53_switch_init(struct b53_de
+ dev->cpu_port = 5;
+ }
+
+- dev->enabled_ports |= BIT(dev->cpu_port);
+ dev->num_ports = fls(dev->enabled_ports);
+
+ dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
--- /dev/null
+From b290c6384afabbca5ae6e2af72fb1b2bc37922be Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 16 Sep 2021 14:03:52 +0200
+Subject: [PATCH] net: dsa: b53: Drop BCM5301x workaround for a wrong CPU/IMP
+ port
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+On BCM5301x port 8 requires a fixed link when used.
+
+Years ago when b53 was an OpenWrt downstream driver (with configuration
+based on sometimes bugged NVRAM) there was a need for a fixup. In case
+of forcing fixed link for (incorrectly specified) port 5 the code had to
+actually setup port 8 link.
+
+For upstream b53 driver with setup based on DT there is no need for that
+workaround. In DT we have and require correct ports setup.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Tested-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/dsa/b53/b53_common.c | 6 ------
+ 1 file changed, 6 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1256,12 +1256,6 @@ static void b53_adjust_link(struct dsa_s
+ return;
+ }
+ }
+- } else if (is5301x(dev)) {
+- if (port != dev->cpu_port) {
+- b53_force_port_config(dev, dev->cpu_port, 2000,
+- DUPLEX_FULL, true, true);
+- b53_force_link(dev, dev->cpu_port, 1);
+- }
+ }
+
+ /* Re-negotiate EEE if it was enabled already */
--- /dev/null
+From 3ff26b29230c54fea2353b63124c589b61953e14 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 16 Sep 2021 14:03:53 +0200
+Subject: [PATCH] net: dsa: b53: Improve flow control setup on BCM5301x
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+According to the Broadcom's reference driver flow control needs to be
+enabled for any CPU switch port (5, 7 or 8 - depending on which one is
+used). Current code makes it work only for the port 5. Use
+dsa_is_cpu_port() which solved that problem.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Tested-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/dsa/b53/b53_common.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -1187,7 +1187,7 @@ static void b53_adjust_link(struct dsa_s
+ return;
+
+ /* Enable flow control on BCM5301x's CPU port */
+- if (is5301x(dev) && port == dev->cpu_port)
++ if (is5301x(dev) && dsa_is_cpu_port(ds, port))
+ tx_pause = rx_pause = true;
+
+ if (phydev->pause) {
--- /dev/null
+From 7d5af56418d7d01e43247a33b6fe6492ea871923 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
+Date: Thu, 16 Sep 2021 14:03:54 +0200
+Subject: [PATCH] net: dsa: b53: Drop unused "cpu_port" field
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+It's set but never used anymore.
+
+Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Tested-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Jakub Kicinski <kuba@kernel.org>
+---
+ drivers/net/dsa/b53/b53_common.c | 28 ----------------------------
+ drivers/net/dsa/b53/b53_priv.h | 1 -
+ 2 files changed, 29 deletions(-)
+
+--- a/drivers/net/dsa/b53/b53_common.c
++++ b/drivers/net/dsa/b53/b53_common.c
+@@ -2286,7 +2286,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 2,
+ .arl_buckets = 1024,
+ .imp_port = 5,
+- .cpu_port = B53_CPU_PORT_25,
+ .duplex_reg = B53_DUPLEX_STAT_FE,
+ },
+ {
+@@ -2297,7 +2296,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 2,
+ .arl_buckets = 1024,
+ .imp_port = 5,
+- .cpu_port = B53_CPU_PORT_25,
+ .duplex_reg = B53_DUPLEX_STAT_FE,
+ },
+ {
+@@ -2308,7 +2306,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2322,7 +2319,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2336,7 +2332,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS_9798,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2350,7 +2345,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS_9798,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2365,7 +2359,6 @@ static const struct b53_chip_data b53_sw
+ .arl_buckets = 1024,
+ .vta_regs = B53_VTA_REGS,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+ .jumbo_size_reg = B53_JUMBO_MAX_SIZE,
+@@ -2378,7 +2371,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2392,7 +2384,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2406,7 +2397,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS_63XX,
+ .duplex_reg = B53_DUPLEX_STAT_63XX,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX,
+@@ -2420,7 +2410,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2434,7 +2423,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2448,7 +2436,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2462,7 +2449,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2476,7 +2462,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2490,7 +2475,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2504,7 +2488,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2518,7 +2501,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 1024,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2532,7 +2514,6 @@ static const struct b53_chip_data b53_sw
+ .arl_bins = 4,
+ .arl_buckets = 256,
+ .imp_port = 8,
+- .cpu_port = B53_CPU_PORT,
+ .vta_regs = B53_VTA_REGS,
+ .duplex_reg = B53_DUPLEX_STAT_GE,
+ .jumbo_pm_reg = B53_JUMBO_PORT_MASK,
+@@ -2558,7 +2539,6 @@ static int b53_switch_init(struct b53_de
+ dev->vta_regs[2] = chip->vta_regs[2];
+ dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+ dev->imp_port = chip->imp_port;
+- dev->cpu_port = chip->cpu_port;
+ dev->num_vlans = chip->vlans;
+ dev->num_arl_bins = chip->arl_bins;
+ dev->num_arl_buckets = chip->arl_buckets;
+@@ -2590,13 +2570,6 @@ static int b53_switch_init(struct b53_de
+ break;
+ #endif
+ }
+- } else if (dev->chip_id == BCM53115_DEVICE_ID) {
+- u64 strap_value;
+-
+- b53_read48(dev, B53_STAT_PAGE, B53_STRAP_VALUE, &strap_value);
+- /* use second IMP port if GMII is enabled */
+- if (strap_value & SV_GMII_CTRL_115)
+- dev->cpu_port = 5;
+ }
+
+ dev->num_ports = fls(dev->enabled_ports);
+--- a/drivers/net/dsa/b53/b53_priv.h
++++ b/drivers/net/dsa/b53/b53_priv.h
+@@ -123,7 +123,6 @@ struct b53_device {
+ /* used ports mask */
+ u16 enabled_ports;
+ unsigned int imp_port;
+- unsigned int cpu_port;
+
+ /* connect specific data */
+ u8 current_page;
projects / openwrt / staging / stintel.git / commitdiff