Refresh kernel patches.
Signed-off-by: Mieczyslaw Nalewaj <namiltd@yahoo.com>
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
-@@ -61,4 +61,16 @@ static inline int mt7620_get_eco(void)
+@@ -62,4 +62,16 @@ static inline int mt7620_get_eco(void)
return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK;
}
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
-@@ -557,8 +557,28 @@ static int __init bootcmdline_scan_chose
+@@ -563,8 +563,28 @@ static int __init bootcmdline_scan_chose
#endif /* CONFIG_OF_EARLY_FLATTREE */
bool dt_bootargs = false;
/*
-@@ -572,6 +592,14 @@ static void __init bootcmdline_init(void
+@@ -578,6 +598,14 @@ static void __init bootcmdline_init(void
}
/*
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
-@@ -699,7 +699,6 @@ static void __init arch_mem_init(char **
+@@ -705,7 +705,6 @@ static void __init arch_mem_init(char **
mips_reserve_vmcore();
mips_parse_crashkernel();
/*
* In order to reduce the possibility of kernel panic when failed to
-@@ -834,6 +833,7 @@ void __init setup_arch(char **cmdline_p)
+@@ -841,6 +840,7 @@ void __init setup_arch(char **cmdline_p)
cpu_cache_init();
paging_init();
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -40,7 +40,7 @@
+@@ -38,7 +38,7 @@
#include <linux/mtd/xip.h>
#define AMD_BOOTLOC_BUG
+};
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
-@@ -1620,6 +1620,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
+@@ -2001,6 +2001,7 @@ int spi_nor_sr2_bit7_quad_enable(struct
static const struct spi_nor_manufacturer *manufacturers[] = {
&spi_nor_atmel,
&spi_nor_esmt,
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
-@@ -617,6 +617,7 @@ struct sfdp {
+@@ -631,6 +631,7 @@ struct sfdp {
/* Manufacturer drivers. */
extern const struct spi_nor_manufacturer spi_nor_atmel;
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
-@@ -352,6 +352,14 @@ config MTD_NAND_QCOM
+@@ -338,6 +338,14 @@ config MTD_NAND_QCOM
Enables support for NAND flash chips on SoCs containing the EBI2 NAND
controller. This controller is found on IPQ806x SoC.
depends on MTD_NAND_ECC_MEDIATEK
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
-@@ -48,6 +48,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
+@@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n
obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
-@@ -4643,6 +4643,7 @@ static const struct net_device_ops mtk_n
+@@ -4662,6 +4662,7 @@ static const struct net_device_ops mtk_n
static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
{
const __be32 *_id = of_get_property(np, "reg", NULL);
struct device_node *pcs_np;
phy_interface_t phy_mode;
-@@ -4840,6 +4841,9 @@ static int mtk_add_mac(struct mtk_eth *e
- register_netdevice_notifier(&mac->device_notifier);
- }
+@@ -4875,6 +4876,9 @@ static int mtk_add_mac(struct mtk_eth *e
+ NETDEV_XDP_ACT_NDO_XMIT |
+ NETDEV_XDP_ACT_NDO_XMIT_SG;
+ if (name)
+ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ);
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -71,13 +71,13 @@ static void phy_process_state_change(str
+@@ -72,13 +72,13 @@ static void phy_process_state_change(str
static void phy_link_up(struct phy_device *phydev)
{
- phydev->phy_link_change(phydev, false);
+ phydev->phy_link_change(phydev, false, do_carrier);
phy_led_trigger_change_speed(phydev);
+ WRITE_ONCE(phydev->link_down_events, phydev->link_down_events + 1);
}
-
-@@ -595,7 +595,7 @@ int phy_start_cable_test(struct phy_devi
+@@ -823,7 +823,7 @@ int phy_start_cable_test(struct phy_devi
goto out;
/* Mark the carrier down until the test is complete */
netif_testing_on(dev);
err = phydev->drv->cable_test_start(phydev);
-@@ -666,7 +666,7 @@ int phy_start_cable_test_tdr(struct phy_
+@@ -894,7 +894,7 @@ int phy_start_cable_test_tdr(struct phy_
goto out;
/* Mark the carrier down until the test is complete */
netif_testing_on(dev);
err = phydev->drv->cable_test_tdr_start(phydev, config);
-@@ -738,7 +738,7 @@ static int phy_check_link_status(struct
+@@ -966,7 +966,7 @@ static int phy_check_link_status(struct
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
}
return 0;
-@@ -1224,7 +1224,7 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
+@@ -1485,7 +1485,7 @@ void phy_state_machine(struct work_struc
+ case PHY_ERROR:
if (phydev->link) {
phydev->link = 0;
- phy_link_down(phydev);
break;
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
-@@ -1037,14 +1037,16 @@ struct phy_device *phy_find_first(struct
+@@ -1069,14 +1069,16 @@ struct phy_device *phy_find_first(struct
}
EXPORT_SYMBOL(phy_find_first);
phydev->mii_ts->link_state(phydev->mii_ts, phydev);
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
-@@ -1687,7 +1687,8 @@ bool phylink_expects_phy(struct phylink
+@@ -1724,7 +1724,8 @@ bool phylink_expects_phy(struct phylink
}
EXPORT_SYMBOL_GPL(phylink_expects_phy);
bool tx_pause, rx_pause;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -739,7 +739,7 @@ struct phy_device {
+@@ -758,7 +758,7 @@ struct phy_device {
- int pma_extable;
+ unsigned int link_down_events;
- void (*phy_link_change)(struct phy_device *phydev, bool up);
+ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -738,7 +738,10 @@ static int phy_check_link_status(struct
+@@ -966,7 +966,10 @@ static int phy_check_link_status(struct
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
}
return 0;
-@@ -1224,7 +1227,10 @@ void phy_state_machine(struct work_struc
- case PHY_HALTED:
+@@ -1485,7 +1488,10 @@ void phy_state_machine(struct work_struc
+ case PHY_ERROR:
if (phydev->link) {
phydev->link = 0;
- phy_link_down(phydev, true);
break;
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
-@@ -647,6 +647,7 @@ struct phy_device {
+@@ -659,6 +659,7 @@ struct phy_device {
unsigned downshifted_rate:1;
unsigned is_on_sfp_module:1;
unsigned mac_managed_pm:1;
+ unsigned no_auto_carrier_off:1;
+ unsigned wol_enabled:1;
unsigned autoneg:1;
- /* The most recently read link state */
+#endif /* __ASM_MACH_RALINK_GPIO_H */
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
-@@ -585,6 +585,12 @@ config GPIO_SNPS_CREG
+@@ -594,6 +594,12 @@ config GPIO_SNPS_CREG
where only several fields in register belong to GPIO lines and
each GPIO line owns a field with different length and on/off value.
depends on PLAT_SPEAR
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -122,6 +122,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
+@@ -130,6 +130,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
+
+#include <linux/module.h>
+#include <linux/io.h>
-+#include <linux/gpio.h>
++#include <linux/gpio/driver.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/of_irq.h>
+
+ rg->chip.parent = &pdev->dev;
+ rg->chip.label = dev_name(&pdev->dev);
-+ rg->chip.of_node = np;
++ rg->chip.fwnode = of_node_to_fwnode(np);
+ rg->chip.ngpio = be32_to_cpu(*ngpio);
+ rg->chip.direction_input = ralink_gpio_direction_input;
+ rg->chip.direction_output = ralink_gpio_direction_output;
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
---
- drivers/pinctrl/ralink/pinctrl-ralink.c | 21 +++++++++++++++++----
+ drivers/pinctrl/mediatek/pinctrl-mtmips.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
---- a/drivers/pinctrl/ralink/pinctrl-ralink.c
-+++ b/drivers/pinctrl/ralink/pinctrl-ralink.c
-@@ -123,11 +123,24 @@ static int ralink_pmx_group_enable(struc
+--- a/drivers/pinctrl/mediatek/pinctrl-mtmips.c
++++ b/drivers/pinctrl/mediatek/pinctrl-mtmips.c
+@@ -123,11 +123,24 @@ static int mtmips_pmx_group_enable(struc
int i;
int shift;
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2981,6 +2981,18 @@ static const struct usb_device_id uvc_id
+@@ -3120,6 +3120,18 @@ static const struct usb_device_id uvc_id
.bInterfaceSubClass = 1,
.bInterfaceProtocol = 0,
.driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) },
{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) },
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u
- if (uvc_event_control(urb, status, len))
+@@ -228,6 +228,7 @@ static void uvc_status_complete(struct u
+ if (uvc_event_control(urb, dev->status, len))
/* The URB will be resubmitted in work context. */
return;
+ dev->motion = 1;
break;
}
-@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d
+@@ -273,6 +274,7 @@ int uvc_status_init(struct uvc_device *d
}
pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
#include <media/v4l2-common.h>
-@@ -1231,9 +1236,149 @@ static void uvc_video_decode_data(struct
+@@ -1235,9 +1240,149 @@ static void uvc_video_decode_data(struct
uvc_urb->async_operations++;
}
/* Mark the buffer as done if the EOF marker is set. */
if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
uvc_dbg(stream->dev, FRAME, "Frame complete (EOF found)\n");
-@@ -1815,6 +1960,8 @@ static int uvc_init_video_isoc(struct uv
+@@ -1819,6 +1964,8 @@ static int uvc_init_video_isoc(struct uv
if (npackets == 0)
return -ENOMEM;
for_each_uvc_urb(uvc_urb, stream) {
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
-@@ -75,6 +75,8 @@
+@@ -73,6 +73,8 @@
#define UVC_QUIRK_FORCE_Y8 0x00000800
#define UVC_QUIRK_FORCE_BPP 0x00001000
#define UVC_QUIRK_WAKE_AUTOSUSPEND 0x00002000
/* Format flags */
#define UVC_FMT_FLAG_COMPRESSED 0x00000001
-@@ -562,6 +564,7 @@ struct uvc_device {
- u8 *status;
+@@ -582,6 +584,7 @@ struct uvc_device {
+
struct input_dev *input;
char input_phys[64];
+ int motion;
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -823,6 +823,12 @@ config SPI_QCOM_GENI
+@@ -895,6 +895,12 @@ config SPI_QCOM_GENI
This driver can also be built as a module. If so, the module
will be called spi-geni-qcom.
+ help
+ This selects a driver for the Ralink RT288x/RT305x SPI Controller.
+
- config SPI_S3C24XX
- tristate "Samsung S3C24XX series SPI"
- depends on ARCH_S3C24XX
+ config SPI_S3C64XX
+ tristate "Samsung S3C64XX/Exynos SoC series type SPI"
+ depends on (PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST)
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -110,6 +110,7 @@ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
+@@ -117,6 +117,7 @@ obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o
obj-$(CONFIG_MACH_REALTEK_RTL) += spi-realtek-rtl.o
obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o
- obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
- spi-s3c24xx-hw-y := spi-s3c24xx.o
+ obj-$(CONFIG_SPI_RZV2M_CSI) += spi-rzv2m-csi.o
obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o
+ obj-$(CONFIG_SPI_SC18IS602) += spi-sc18is602.o
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
@@ -0,0 +1,535 @@
+};
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -998,6 +998,11 @@ config I2C_RK3X
+@@ -1021,6 +1021,11 @@ config I2C_RK3X
This driver can also be built as a module. If so, the module will
be called i2c-rk3x.
depends on ARCH_RENESAS || COMPILE_TEST
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
-@@ -95,6 +95,7 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pc
+@@ -96,6 +96,7 @@ obj-$(CONFIG_I2C_PCA_PLATFORM) += i2c-pc
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -1102,6 +1102,8 @@ config MMC_OWL
+@@ -1059,6 +1059,8 @@ config MMC_OWL
config MMC_SDHCI_EXTERNAL_DMA
bool
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
-@@ -86,6 +86,7 @@ source "sound/soc/mxs/Kconfig"
+@@ -99,6 +99,7 @@ source "sound/soc/mxs/Kconfig"
source "sound/soc/pxa/Kconfig"
source "sound/soc/qcom/Kconfig"
source "sound/soc/rockchip/Kconfig"
source "sound/soc/sof/Kconfig"
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
+@@ -56,6 +56,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += qcom/
obj-$(CONFIG_SND_SOC) += rockchip/
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
-@@ -445,6 +445,9 @@ uart_get_baud_rate(struct uart_port *por
+@@ -467,6 +467,9 @@ uart_get_baud_rate(struct uart_port *por
break;
}
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
-@@ -393,6 +393,15 @@ config PWM_MEDIATEK
+@@ -415,6 +415,15 @@ config PWM_MICROCHIP_CORE
To compile this driver as a module, choose M here: the module
- will be called pwm-mediatek.
+ will be called pwm-microchip-core.
+config PWM_MEDIATEK_RAMIPS
+ tristate "Mediatek PWM support"
depends on ARCH_MXS || COMPILE_TEST
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
+@@ -35,6 +35,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p
obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
obj-$(CONFIG_PWM_MESON) += pwm-meson.o
obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o
+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o
+ obj-$(CONFIG_PWM_MICROCHIP_CORE) += pwm-microchip-core.o
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
- obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o
--- /dev/null
+++ b/drivers/pwm/pwm-mediatek-ramips.c
@@ -0,0 +1,197 @@
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
-@@ -462,6 +462,12 @@ static int dwc2_driver_probe(struct plat
+@@ -493,6 +493,12 @@ static int dwc2_driver_probe(struct plat
if (retval)
return retval;
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_ECHO) += echo/
+@@ -52,6 +52,7 @@ obj-$(CONFIG_ECHO) += echo/
obj-$(CONFIG_CXL_BASE) += cxl/
obj-$(CONFIG_DW_XDATA_PCIE) += dw-xdata-pcie.o
obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o
+#endif
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
-@@ -824,4 +824,6 @@ config CRYPTO_DEV_SA2UL
- source "drivers/crypto/keembay/Kconfig"
+@@ -797,4 +797,6 @@ config CRYPTO_DEV_SA2UL
source "drivers/crypto/aspeed/Kconfig"
+ source "drivers/crypto/starfive/Kconfig"
+source "drivers/crypto/mtk-eip93/Kconfig"
+
endif # CRYPTO_HW
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
-@@ -53,3 +53,4 @@ obj-y += xilinx/
- obj-y += hisilicon/
+@@ -51,3 +51,4 @@ obj-y += hisilicon/
obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
- obj-y += keembay/
+ obj-y += intel/
+ obj-y += starfive/
+obj-$(CONFIG_CRYPTO_DEV_EIP93) += mtk-eip93/
projects / openwrt / staging / stintel.git / commitdiff