Drop upstreamed patches and refresh the left SPI controller patch.
Signed-off-by: Robert Marko <robimarko@gmail.com>
+++ /dev/null
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -572,6 +572,18 @@ config ARCH_VIRT
- select HAVE_ARM_ARCH_TIMER
- select ARCH_SUPPORTS_BIG_ENDIAN
-
-+config ARCH_AIROHA
-+ bool "Airoha SoC Support"
-+ depends on ARCH_MULTI_V7
-+ select ARM_AMBA
-+ select ARM_GIC
-+ select ARM_GIC_V3
-+ select ARM_PSCI
-+ select HAVE_ARM_ARCH_TIMER
-+ select COMMON_CLK
-+ help
-+ Support for Airoha EN7523 SoCs
-+
- #
- # This is sorted alphabetically by mach-* pathname. However, plat-*
- # Kconfigs may be included either alphabetically (according to the
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -156,6 +156,7 @@ textofs-$(CONFIG_ARCH_AXXIA) := 0x003080
- # Machine directory name. This list is sorted alphanumerically
- # by CONFIG_* macro name.
- machine-$(CONFIG_ARCH_ACTIONS) += actions
-+machine-$(CONFIG_ARCH_AIROHA) += airoha
- machine-$(CONFIG_ARCH_ALPINE) += alpine
- machine-$(CONFIG_ARCH_ARTPEC) += artpec
- machine-$(CONFIG_ARCH_ASPEED) += aspeed
+++ /dev/null
---- a/drivers/clk/Kconfig
-+++ b/drivers/clk/Kconfig
-@@ -192,6 +192,15 @@ config COMMON_CLK_CS2000_CP
- help
- If you say yes here you get support for the CS2000 clock multiplier.
-
-+config COMMON_CLK_EN7523
-+ bool "Clock driver for Airoha EN7523 SoC system clocks"
-+ depends on OF
-+ depends on ARCH_AIROHA || COMPILE_TEST
-+ default ARCH_AIROHA
-+ help
-+ This driver provides the fixed clocks and gates present on Airoha
-+ ARM silicon.
-+
- config COMMON_CLK_FSL_FLEXSPI
- tristate "Clock driver for FlexSPI on Layerscape SoCs"
- depends on ARCH_LAYERSCAPE || COMPILE_TEST
---- a/drivers/clk/Makefile
-+++ b/drivers/clk/Makefile
-@@ -27,6 +27,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-
- obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
- obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
- obj-$(CONFIG_ARCH_SPARX5) += clk-sparx5.o
-+obj-$(CONFIG_COMMON_CLK_EN7523) += clk-en7523.o
- obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
- obj-$(CONFIG_COMMON_CLK_FSL_FLEXSPI) += clk-fsl-flexspi.o
- obj-$(CONFIG_COMMON_CLK_FSL_SAI) += clk-fsl-sai.o
+++ /dev/null
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -247,6 +247,16 @@ config GPIO_EM
- help
- Say yes here to support GPIO on Renesas Emma Mobile SoCs.
-
-+config GPIO_EN7523
-+ tristate "Airoha GPIO support"
-+ depends on ARCH_AIROHA
-+ default ARCH_AIROHA
-+ select GPIO_GENERIC
-+ select GPIOLIB_IRQCHIP
-+ help
-+ Say Y or M here to support the GPIO controller block on the
-+ Airoha EN7523 SoC. It supports two banks of 32 GPIOs.
-+
- config GPIO_EP93XX
- def_bool y
- depends on ARCH_EP93XX
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -57,6 +57,7 @@ obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
- obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
- obj-$(CONFIG_GPIO_EIC_SPRD) += gpio-eic-sprd.o
- obj-$(CONFIG_GPIO_EM) += gpio-em.o
-+obj-$(CONFIG_GPIO_EN7523) += gpio-en7523.o
- obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
- obj-$(CONFIG_GPIO_EXAR) += gpio-exar.o
- obj-$(CONFIG_GPIO_F7188X) += gpio-f7188x.o
+++ /dev/null
-From 48342ae751c797ac73ac9c894b3f312df18ffd21 Mon Sep 17 00:00:00 2001
-From: Geert Uytterhoeven <geert+renesas@glider.be>
-Date: Wed, 15 Sep 2021 13:46:20 +0100
-Subject: [PATCH] ARM: 9124/1: uncompress: Parse "linux,usable-memory-range" DT
- property
-
-Add support for parsing the "linux,usable-memory-range" DT property.
-This property is used to describe the usable memory reserved for the
-crash dump kernel, and thus makes the memory reservation explicit.
-If present, Linux no longer needs to mask the program counter, and rely
-on the "mem=" kernel parameter to obtain the start and size of usable
-memory.
-
-For backwards compatibility, the traditional method to derive the start
-of memory is still used if "linux,usable-memory-range" is absent.
-
-Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
-Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
-Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
----
- .../arm/boot/compressed/fdt_check_mem_start.c | 48 ++++++++++++++++---
- 1 file changed, 42 insertions(+), 6 deletions(-)
-
---- a/arch/arm/boot/compressed/fdt_check_mem_start.c
-+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
-@@ -55,16 +55,17 @@ static uint64_t get_val(const fdt32_t *c
- * DTB, and, if out-of-range, replace it by the real start address.
- * To preserve backwards compatibility (systems reserving a block of memory
- * at the start of physical memory, kdump, ...), the traditional method is
-- * always used if it yields a valid address.
-+ * used if it yields a valid address, unless the "linux,usable-memory-range"
-+ * property is present.
- *
- * Return value: start address of physical memory to use
- */
- uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
- {
-- uint32_t addr_cells, size_cells, base;
-+ uint32_t addr_cells, size_cells, usable_base, base;
- uint32_t fdt_mem_start = 0xffffffff;
-- const fdt32_t *reg, *endp;
-- uint64_t size, end;
-+ const fdt32_t *usable, *reg, *endp;
-+ uint64_t size, usable_end, end;
- const char *type;
- int offset, len;
-
-@@ -80,6 +81,27 @@ uint32_t fdt_check_mem_start(uint32_t me
- if (addr_cells > 2 || size_cells > 2)
- return mem_start;
-
-+ /*
-+ * Usable memory in case of a crash dump kernel
-+ * This property describes a limitation: memory within this range is
-+ * only valid when also described through another mechanism
-+ */
-+ usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
-+ (addr_cells + size_cells) * sizeof(fdt32_t));
-+ if (usable) {
-+ size = get_val(usable + addr_cells, size_cells);
-+ if (!size)
-+ return mem_start;
-+
-+ if (addr_cells > 1 && fdt32_ld(usable)) {
-+ /* Outside 32-bit address space */
-+ return mem_start;
-+ }
-+
-+ usable_base = fdt32_ld(usable + addr_cells - 1);
-+ usable_end = usable_base + size;
-+ }
-+
- /* Walk all memory nodes and regions */
- for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
- offset = fdt_next_node(fdt, offset, NULL)) {
-@@ -107,7 +129,20 @@ uint32_t fdt_check_mem_start(uint32_t me
-
- base = fdt32_ld(reg + addr_cells - 1);
- end = base + size;
-- if (mem_start >= base && mem_start < end) {
-+ if (usable) {
-+ /*
-+ * Clip to usable range, which takes precedence
-+ * over mem_start
-+ */
-+ if (base < usable_base)
-+ base = usable_base;
-+
-+ if (end > usable_end)
-+ end = usable_end;
-+
-+ if (end <= base)
-+ continue;
-+ } else if (mem_start >= base && mem_start < end) {
- /* Calculated address is valid, use it */
- return mem_start;
- }
-@@ -123,7 +158,8 @@ uint32_t fdt_check_mem_start(uint32_t me
- }
-
- /*
-- * The calculated address is not usable.
-+ * The calculated address is not usable, or was overridden by the
-+ * "linux,usable-memory-range" property.
- * Use the lowest usable physical memory address from the DTB instead,
- * and make sure this is a multiple of 2 MiB for phys/virt patching.
- */
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -307,6 +307,12 @@ config SPI_DLN2
+@@ -330,6 +330,12 @@ config SPI_DLN2
This driver can also be built as a module. If so, the module
will be called spi-dln2.
depends on ARCH_EP93XX || COMPILE_TEST
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_SPI_DW_BT1) += spi-dw-bt1.
+@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_DW_BT1) += spi-dw-bt1.
obj-$(CONFIG_SPI_DW_MMIO) += spi-dw-mmio.o
obj-$(CONFIG_SPI_DW_PCI) += spi-dw-pci.o
obj-$(CONFIG_SPI_EP93XX) += spi-ep93xx.o
+++ /dev/null
-From b3b76fc86f0fb4d98918f48c784138bfa950dff6 Mon Sep 17 00:00:00 2001
-From: Felix Fietkau <nbd@nbd.name>
-Date: Wed, 15 Jun 2022 14:53:34 +0200
-Subject: [PATCH] PCI: mediatek: Allow building for ARCH_AIROHA
-
-Allow selecting the pcie-mediatek driver if ARCH_AIROHA is set, because the
-Airoha EN7523 SoC uses the same controller as MT7622.
-
-The driver itself is not modified. The PCIe controller DT node should use
-mediatek,mt7622-pcie after airoha,en7523-pcie.
-
-Link: https://lore.kernel.org/r/20220615125335.96089-2-nbd@nbd.name
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
-Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
----
- drivers/pci/controller/Kconfig | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/controller/Kconfig
-+++ b/drivers/pci/controller/Kconfig
-@@ -233,7 +233,7 @@ config PCIE_ROCKCHIP_EP
-
- config PCIE_MEDIATEK
- tristate "MediaTek PCIe controller"
-- depends on ARCH_MEDIATEK || COMPILE_TEST
-+ depends on ARCH_AIROHA || ARCH_MEDIATEK || COMPILE_TEST
- depends on OF
- depends on PCI_MSI_IRQ_DOMAIN
- help
projects / openwrt / staging / stintel.git / commitdiff