target/linux/sunxi/base-files/etc/board.d/02_network

   1 #
   2 # Copyright (C) 2013-2015 OpenWrt.org
   3 #
   4
   5 . /lib/functions/uci-defaults.sh
   6 . /lib/functions/system.sh
   7
   8 sunxi_setup_interfaces()
   9 {
  10         local board="$1"
  11
  12         case "$board" in
  13         friendlyarm,nanopi-r1|\
  14         friendlyarm,nanopi-r1s-h5)
  15                 ucidef_set_interfaces_lan_wan "eth1" "eth0"
  16                 ;;
  17         lamobo,lamobo-r1)
  18                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" wan
  19                 ;;
  20         olimex,a13-olinuxino-micro)
  21                 ucidef_set_interface_lan "wlan0"
  22                 ;;
  23         xunlong,orangepi-r1)
  24                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  25                 ;;
  26         *)
  27                 ucidef_set_interface_lan "eth0"
  28                 ;;
  29         esac
  30 }
  31
  32 nanopi_r1_get_mac()
  33 {
  34         local interface=$1
  35         local eeprom_path="/sys/bus/i2c/devices/2-0051/eeprom"
  36         local address
  37
  38         if [ -f "$eeprom_path" ]; then
  39                 address=$(get_mac_binary "$eeprom_path" 0xfa)
  40                 if [ "$interface" = "lan" ]; then
  41                         address=$(macaddr_setbit_la "$address")
  42                 fi
  43         else
  44                 address=$(macaddr_generate_from_mmc_cid mmcblk1)
  45                 if [ "$interface" = "lan" ]; then
  46                         address=$(macaddr_add "$address" 1)
  47                 fi
  48         fi
  49
  50         echo "$address"
  51 }
  52
  53 sunxi_setup_macs()
  54 {
  55         local board="$1"
  56         local lan_mac=""
  57         local wan_mac=""
  58         local label_mac=""
  59
  60         case "$board" in
  61         friendlyarm,nanopi-r1)
  62                 wan_mac=$(nanopi_r1_get_mac wan)
  63                 lan_mac=$(nanopi_r1_get_mac lan)
  64                 ;;
  65         friendlyarm,nanopi-r1s-h5)
  66                 lan_mac=$(get_mac_binary "/sys/bus/i2c/devices/0-0051/eeprom" 0xfa)
  67                 ;;
  68         esac
  69
  70         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
  71         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
  72         [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
  73 }
  74
  75 board_config_update
  76 board=$(board_name)
  77 sunxi_setup_interfaces $board
  78 sunxi_setup_macs $board
  79 board_config_flush
  80
  81 exit 0