target/linux/ramips/dts/mt7620a_tplink_ec220-g5-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/leds/common.h>
   4
   5 #include "mt7620a_tplink_8m.dtsi"
   6
   7 / {
   8         compatible = "tplink,ec220-g5-v2", "ralink,mt7620a-soc";
   9         model = "TP-Link EC220-G5 v2";
  10
  11         aliases {
  12                 led-boot = &led_power;
  13                 led-failsafe = &led_power;
  14                 led-running = &led_power;
  15                 led-upgrade = &led_power;
  16                 label-mac-device = &ethernet;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_power: led-0 {
  23                         function = LED_FUNCTION_POWER;
  24                         color = <LED_COLOR_ID_GREEN>;
  25                         gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 led-1 {
  29                         function = LED_FUNCTION_WAN;
  30                         color = <LED_COLOR_ID_ORANGE>;
  31                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 led-2 {
  35                         function = LED_FUNCTION_WAN;
  36                         color = <LED_COLOR_ID_GREEN>;
  37                         gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 led-3 {
  41                         function = LED_FUNCTION_LAN;
  42                         color = <LED_COLOR_ID_GREEN>;
  43                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 led-4 {
  47                         function = LED_FUNCTION_WLAN_2GHZ;
  48                         color = <LED_COLOR_ID_GREEN>;
  49                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  50                         linux,default-trigger = "phy0tpt";
  51                 };
  52
  53                 led-5 {
  54                         function = LED_FUNCTION_WLAN_5GHZ;
  55                         color = <LED_COLOR_ID_GREEN>;
  56                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  57                         linux,default-trigger = "phy1tpt";
  58                 };
  59
  60                 led-6 {
  61                         function = LED_FUNCTION_WPS;
  62                         color = <LED_COLOR_ID_GREEN>;
  63                         gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         keys {
  68                 compatible = "gpio-keys";
  69
  70                 reset {
  71                         label = "reset";
  72                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_RESTART>;
  74                 };
  75
  76                 rfkill {
  77                         label = "rfkill";
  78                         gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_RFKILL>;
  80                 };
  81         };
  82
  83         rtl8367s {
  84                 compatible = "realtek,rtl8367b";
  85                 cpu_port = <7>;
  86                 realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
  87                 mii-bus = <&mdio0>;
  88                 phy-id = <29>;
  89         };
  90 };
  91
  92 &spi0 {
  93         flash@0 {
  94                 #address-cells = <1>;
  95                 #size-cells = <1>;
  96         };
  97 };
  98
  99 &state_default {
 100         gpio {
 101                 groups = "i2c", "uartf", "ephy", "rgmii2";
 102                 function = "gpio";
 103         };
 104 };
 105
 106 &ethernet {
 107         pinctrl-names = "default";
 108         pinctrl-0 = <&rgmii1_pins &mdio_pins>;
 109
 110         port@5 {
 111                 status = "okay";
 112                 mediatek,fixed-link = <1000 1 1 1>;
 113                 phy-mode = "rgmii";
 114         };
 115
 116         mdio0: mdio-bus {
 117                 status = "okay";
 118                 reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
 119                 reset-delay-us = <10000>;
 120         };
 121 };
 122
 123 &ehci {
 124         status = "disabled";
 125 };
 126
 127 &ohci {
 128         status = "disabled";
 129 };
 130
 131 &wmac {
 132         pinctrl-names = "default", "pa_gpio";
 133         pinctrl-0 = <&pa_pins>;
 134         pinctrl-1 = <&pa_gpio_pins>;
 135
 136         nvmem-cells = <&eeprom_radio_0>, <&macaddr_rom_f100 0>;
 137         nvmem-cell-names = "eeprom", "mac-address";
 138 };
 139
 140
 141 &wifi {
 142         nvmem-cells = <&eeprom_radio_8000>, <&macaddr_rom_f100 2>;
 143         nvmem-cell-names = "eeprom", "mac-address";
 144 };