target/linux/lantiq/files/arch/mips/boot/dts/vr9.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,vr9";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 cpu@0 {
  21                         compatible = "mips,mips34Kc";
  22                         reg = <0>;
  23                 };
  24         };
  25
  26         cputemp {
  27                 compatible = "lantiq,cputemp";
  28         };
  29
  30         reboot {
  31                 compatible = "syscon-reboot";
  32
  33                 regmap = <&rcu0>;
  34                 offset = <0x10>;
  35                 mask = <0xe0000000>;
  36         };
  37
  38         biu@1f800000 {
  39                 #address-cells = <1>;
  40                 #size-cells = <1>;
  41                 compatible = "lantiq,biu", "simple-bus";
  42                 reg = <0x1f800000 0x800000>;
  43                 ranges = <0x0 0x1f800000 0x7fffff>;
  44
  45                 icu0: icu@80200 {
  46                         #interrupt-cells = <1>;
  47                         interrupt-controller;
  48                         compatible = "lantiq,icu";
  49                         reg = <0x80200 0x28
  50                                 0x80228 0x28
  51                                 0x80250 0x28
  52                                 0x80278 0x28
  53                                 0x802a0 0x28>;
  54                 };
  55
  56                 watchdog@803f0 {
  57                         compatible = "lantiq,xrx100-wdt", "lantiq,xrx100-wdt";
  58                         reg = <0x803f0 0x10>;
  59
  60                         regmap = <&rcu0>;
  61                 };
  62         };
  63
  64         sram@1f000000 {
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67                 compatible = "lantiq,sram", "simple-bus";
  68                 reg = <0x1f000000 0x800000>;
  69                 ranges = <0x0 0x1f000000 0x7fffff>;
  70
  71                 eiu0: eiu@101000 {
  72                         #interrupt-cells = <1>;
  73                         interrupt-controller;
  74                         compatible = "lantiq,eiu-xway";
  75                         reg = <0x101000 0x1000>;
  76                         interrupt-parent = <&icu0>;
  77                         lantiq,eiu-irqs = <166 135 66 40 41 42>;
  78                 };
  79
  80                 pmu0: pmu@102000 {
  81                         compatible = "lantiq,pmu-xway";
  82                         reg = <0x102000 0x1000>;
  83                 };
  84
  85                 cgu0: cgu@103000 {
  86                         compatible = "lantiq,cgu-xway";
  87                         reg = <0x103000 0x1000>;
  88                 };
  89
  90                 dcdc@106a00 {
  91                         compatible = "lantiq,dcdc-xrx200";
  92                         reg = <0x106a00 0x200>;
  93                 };
  94
  95                 vmmc: vmmc@103000 {
  96                         status = "disabled";
  97                         compatible = "lantiq,vmmc-xway";
  98                         reg = <0x103000 0x400>;
  99                         interrupt-parent = <&icu0>;
 100                         interrupts = <150 151 152 153 154 155>;
 101                 };
 102
 103                 rcu0: rcu@203000 {
 104                         compatible = "lantiq,xrx200-rcu", "simple-mfd", "syscon";
 105                         reg = <0x203000 0x100>;
 106                         ranges = <0x0 0x203000 0x100>;
 107                         big-endian;
 108
 109                         gphy0: gphy@20 {
 110                                 compatible = "lantiq,xrx200-gphy";
 111                                 reg = <0x20 0x4>;
 112
 113                                 resets = <&reset0 31 30>, <&reset1 7 7>;
 114                                 reset-names = "gphy", "gphy2";
 115                         };
 116
 117                         gphy1: gphy@68 {
 118                                 compatible = "lantiq,xrx200-gphy";
 119                                 reg = <0x68 0x4>;
 120
 121                                 resets = <&reset0 29 28>, <&reset1 6 6>;
 122                                 reset-names = "gphy", "gphy2";
 123                         };
 124
 125                         reset0: reset-controller@10 {
 126                                 compatible = "lantiq,xrx200-reset";
 127                                 reg = <0x10 4>, <0x14 4>;
 128
 129                                 #reset-cells = <2>;
 130                         };
 131
 132                         reset1: reset-controller@48 {
 133                                 compatible = "lantiq,xrx200-reset";
 134                                 reg = <0x48 4>, <0x24 4>;
 135
 136                                 #reset-cells = <2>;
 137                         };
 138
 139                         usb_phy0: usb2-phy@18 {
 140                                 compatible = "lantiq,xrx200-usb2-phy";
 141                                 reg = <0x18 4>, <0x38 4>;
 142                                 status = "disabled";
 143
 144                                 resets = <&reset1 4 4>, <&reset0 4 4>;
 145                                 reset-names = "phy", "ctrl";
 146                                 #phy-cells = <0>;
 147                         };
 148
 149                         usb_phy1: usb2-phy@34 {
 150                                 compatible = "lantiq,xrx200-usb2-phy";
 151                                 reg = <0x34 4>, <0x3c 4>;
 152                                 status = "disabled";
 153
 154                                 resets = <&reset1 5 5>, <&reset0 4 4>;
 155                                 reset-names = "phy", "ctrl";
 156                                 #phy-cells = <0>;
 157                         };
 158                 };
 159         };
 160
 161         fpi@10000000 {
 162                 compatible = "lantiq,xrx200-fpi", "simple-bus";
 163                 ranges = <0x0 0x10000000 0xf000000>;
 164                 reg =   <0x1f400000 0x1000>,
 165                         <0x10000000 0xf000000>;
 166                 regmap = <&rcu0>;
 167                 offset-endianness = <0x4c>;
 168                 #address-cells = <1>;
 169                 #size-cells = <1>;
 170
 171                 localbus: localbus@0 {
 172                         #address-cells = <2>;
 173                         #size-cells = <1>;
 174                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 175                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 176                         compatible = "lantiq,localbus", "simple-bus";
 177                 };
 178
 179                 gptu@e100a00 {
 180                         compatible = "lantiq,gptu-xway";
 181                         reg = <0xe100a00 0x100>;
 182                         interrupt-parent = <&icu0>;
 183                         interrupts = <126 127 128 129 130 131>;
 184                 };
 185
 186                 usif: usif@da00000 {
 187                         compatible = "lantiq,usif";
 188                         reg = <0xda00000 0x1000000>;
 189                         interrupt-parent = <&icu0>;
 190                         interrupts = <29 125 107 108 109 110>;
 191                         status = "disabled";
 192                 };
 193
 194                 spi: spi@e100800 {
 195                         compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi";
 196                         reg = <0xe100800 0x100>;
 197                         interrupt-parent = <&icu0>;
 198                         interrupts = <22 23 24>;
 199                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 200                                         "spi_frm";
 201                         #address-cells = <1>;
 202                         #size-cells = <1>;
 203                         status = "disabled";
 204                 };
 205
 206                 gpio: pinmux@e100b10 {
 207                         compatible = "lantiq,xrx200-pinctrl";
 208                         #gpio-cells = <2>;
 209                         gpio-controller;
 210                         reg = <0xe100b10 0xa0>;
 211                 };
 212
 213                 stp: stp@e100bb0 {
 214                         status = "disabled";
 215                         compatible = "lantiq,gpio-stp-xway";
 216                         reg = <0xe100bb0 0x40>;
 217                         #gpio-cells = <2>;
 218                         gpio-controller;
 219
 220                         lantiq,shadow = <0xffffff>;
 221                         lantiq,groups = <0x7>;
 222                         lantiq,dsl = <0x0>;
 223                         lantiq,phy1 = <0x0>;
 224                         lantiq,phy2 = <0x0>;
 225                 };
 226
 227                 asc1: serial@e100c00 {
 228                         compatible = "lantiq,asc";
 229                         reg = <0xe100c00 0x400>;
 230                         interrupt-parent = <&icu0>;
 231                         interrupts = <112 113 114>;
 232                 };
 233
 234                 deu@e103100 {
 235                         compatible = "lantiq,deu-xrx200";
 236                         reg = <0xe103100 0xf00>;
 237                 };
 238
 239                 dma0: dma@e104100 {
 240                         compatible = "lantiq,dma-xway";
 241                         reg = <0xe104100 0x800>;
 242                 };
 243
 244                 ebu0: ebu@e105300 {
 245                         compatible = "lantiq,ebu-xway";
 246                         reg = <0xe105300 0x100>;
 247                 };
 248
 249                 usb0: usb@e101000 {
 250                         status = "disabled";
 251                         compatible = "lantiq,xrx200-usb";
 252                         reg = <0xe101000 0x1000
 253                                 0xe120000 0x3f000>;
 254                         interrupt-parent = <&icu0>;
 255                         interrupts = <62 91>;
 256                         dr_mode = "host";
 257                         phys = <&usb_phy0>;
 258                         phy-names = "usb2-phy";
 259                 };
 260
 261                 usb1: usb@e106000 {
 262                         status = "disabled";
 263                         compatible = "lantiq,xrx200-usb";
 264                         reg = <0xe106000 0x1000>;
 265                         interrupt-parent = <&icu0>;
 266                         interrupts = <91>;
 267                         dr_mode = "host";
 268                         phys = <&usb_phy1>;
 269                         phy-names = "usb2-phy";
 270                 };
 271
 272                 eth0: eth@e108000 {
 273                         #address-cells = <1>;
 274                         #size-cells = <0>;
 275                         compatible = "lantiq,xrx200-net";
 276                         reg = < 0xe108000 0x3000 /* switch */
 277                                 0xe10b100 0x70 /* mdio */
 278                                 0xe10b1d8 0x30 /* mii */
 279                                 0xe10b308 0x30 /* pmac */
 280                         >;
 281                         interrupt-parent = <&icu0>;
 282                         interrupts = <75 73 72>;
 283                         resets = <&reset0 21 16>, <&reset0 8 8>;
 284                         reset-names = "switch", "ppe";
 285                         lantiq,phys = <&gphy0>, <&gphy1>;
 286                 };
 287
 288                 mei@e116000 {
 289                         compatible = "lantiq,mei-xrx200";
 290                         reg = <0xe116000 0x9c>;
 291                         interrupt-parent = <&icu0>;
 292                         interrupts = <63>;
 293                 };
 294
 295                 ppe@e234000 {
 296                         compatible = "lantiq,ppe-xrx200";
 297                         reg = <0xe234000 0x3ffd>;
 298                         interrupt-parent = <&icu0>;
 299                         interrupts = <96>;
 300                         resets = <&reset0 3 3>, <&reset0 11 11>, <&reset0 23 23>;
 301                         reset-names = "dsp", "dfe", "tc";
 302                 };
 303
 304                 pcie0: pcie@d900000 {
 305                         compatible = "lantiq,pcie-xrx200";
 306
 307                         #interrupt-cells = <1>;
 308                         #size-cells = <2>;
 309                         #address-cells = <3>;
 310
 311                         reg = <0xd900000 0x1000>;
 312
 313                         interrupt-parent = <&icu0>;
 314                         interrupts = <161 144>;
 315
 316                         device_type = "pci";
 317
 318                         gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>;
 319                 };
 320
 321                 pci0: pci@e105400 {
 322                         status = "disabled";
 323
 324                         #address-cells = <3>;
 325                         #size-cells = <2>;
 326                         #interrupt-cells = <1>;
 327                         compatible = "lantiq,pci-xway";
 328                         bus-range = <0x0 0x0>;
 329                         ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000   /* pci memory */
 330                                 0x1000000 0 0x00000000 0xae00000 0 0x200000>; /* io space */
 331                         reg = <0x7000000 0x8000         /* config space */
 332                                 0xe105400 0x400>;       /* pci bridge */
 333                         lantiq,bus-clock = <33333333>;
 334                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 335                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */
 336                         req-mask = <0x1>; /* GNT1 */
 337                 };
 338         };
 339
 340         vdsl {
 341                 compatible = "lantiq,vdsl-vrx200";
 342         };
 343 };