target/linux/lantiq/files/arch/mips/boot/dts/amazonse.dtsi

   1 #include <dt-bindings/gpio/gpio.h>
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "lantiq,xway", "lantiq,ase";
   7
   8         aliases {
   9                 serial0 = &asc1;
  10         };
  11
  12         chosen {
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         cpus {
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19
  20                 cpu@0 {
  21                         compatible = "mips,mips4Kc";
  22                         reg = <0>;
  23                 };
  24         };
  25
  26         reboot {
  27                 compatible = "syscon-reboot";
  28
  29                 regmap = <&rcu0>;
  30                 offset = <0x10>;
  31                 mask = <0x40000000>;
  32         };
  33
  34         biu@1f800000 {
  35                 #address-cells = <1>;
  36                 #size-cells = <1>;
  37                 compatible = "lantiq,biu", "simple-bus";
  38                 reg = <0x1f800000 0x800000>;
  39                 ranges = <0x0 0x1f800000 0x7fffff>;
  40
  41                 icu0: icu@80200 {
  42                         #interrupt-cells = <1>;
  43                         interrupt-controller;
  44                         compatible = "lantiq,icu";
  45                         reg = <0x80200 0x28
  46                                 0x80228 0x28
  47                                 0x80250 0x28
  48                                 0x80278 0x28
  49                                 0x802a0 0x28>;
  50                 };
  51
  52                 watchdog@803f0 {
  53                         compatible = "lantiq,wdt";
  54                         reg = <0x803f0 0x10>;
  55                 };
  56         };
  57
  58         sram@1f000000 {
  59                 #address-cells = <1>;
  60                 #size-cells = <1>;
  61                 compatible = "lantiq,sram", "simple-bus";
  62                 reg = <0x1f000000 0x800000>;
  63                 ranges = <0x0 0x1f000000 0x7fffff>;
  64
  65                 eiu0: eiu@101000 {
  66                         #interrupt-cells = <1>;
  67                         interrupt-controller;
  68                         compatible = "lantiq,eiu-xway";
  69                         reg = <0x101000 0x1000>;
  70                         interrupt-parent = <&icu0>;
  71                         lantiq,eiu-irqs = <29 30 31>;
  72                 };
  73
  74                 pmu0: pmu@102000 {
  75                         compatible = "lantiq,pmu-xway";
  76                         reg = <0x102000 0x1000>;
  77                 };
  78
  79                 cgu0: cgu@103000 {
  80                         compatible = "lantiq,cgu-xway";
  81                         reg = <0x103000 0x1000>;
  82                         #clock-cells = <1>;
  83                 };
  84
  85                 rcu0: rcu@203000 {
  86                         compatible = "lantiq,ase-rcu", "simple-mfd", "syscon";
  87                         reg = <0x203000 0x1000>;
  88                         ranges = <0x0 0x203000 0x100>;
  89                         big-endian;
  90
  91                         reset: reset-controller@10 {
  92                                 compatible = "lantiq,danube-reset";
  93                                 reg = <0x10 4>, <0x14 4>;
  94
  95                                 #reset-cells = <2>;
  96                         };
  97
  98                         usb_phy: usb2-phy@18 {
  99                                 compatible = "lantiq,ase-usb2-phy";
 100                                 reg = <0x18 4>;
 101                                 status = "disabled";
 102
 103                                 resets = <&reset 4 4>;
 104                                 reset-names = "ctrl";
 105                                 #phy-cells = <0>;
 106                         };
 107                 };
 108         };
 109
 110         fpi@10000000 {
 111                 #address-cells = <1>;
 112                 #size-cells = <1>;
 113                 compatible = "lantiq,fpi", "simple-bus";
 114                 ranges = <0x0 0x10000000 0xeefffff>;
 115                 reg = <0x10000000 0xef00000>;
 116
 117                 localbus: localbus@0 {
 118                         #address-cells = <2>;
 119                         #size-cells = <1>;
 120                         ranges = <0 0 0x0 0x3ffffff /* addrsel0 */
 121                                 1 0 0x4000000 0x4000010>; /* addsel1 */
 122                         compatible = "lantiq,localbus", "simple-bus";
 123                 };
 124
 125                 spi: spi@e100800 {
 126                         compatible = "lantiq,ase-spi";
 127                         reg = <0xe100800 0x100>;
 128                         interrupt-parent = <&icu0>;
 129                         interrupts = <24 25 26>;
 130                         interrupt-names = "spi_rx", "spi_tx", "spi_err",
 131                                         "spi_frm";
 132                         #address-cells = <1>;
 133                         #size-cells = <1>;
 134                         status = "disabled";
 135                 };
 136
 137                 gptu@e100a00 {
 138                         compatible = "lantiq,gptu-xway";
 139                         reg = <0xe100a00 0x100>;
 140                         interrupt-parent = <&icu0>;
 141                         interrupts = <33 34 35 36 37 38>;
 142                 };
 143
 144                 gpio: pinmux@e100b10 {
 145                         compatible = "lantiq,ase-pinctrl";
 146                         #gpio-cells = <2>;
 147                         gpio-controller;
 148                         reg = <0xe100b10 0xa0>;
 149                 };
 150
 151                 asc1: serial@e100c00 {
 152                         compatible = "lantiq,asc";
 153                         reg = <0xe100c00 0x400>;
 154                         interrupt-parent = <&icu0>;
 155                         interrupts = <72 74 75>;
 156                 };
 157
 158                 mei@e116000 {
 159                         compatible = "lantiq,mei-xway";
 160                         reg = <0xe116000 0x400>;
 161                         interrupt-parent = <&icu0>;
 162                         interrupts = <81>;
 163                 };
 164
 165                 usb: usb@e101000 {
 166                         compatible = "lantiq,ase-usb";
 167                         reg = <0xe101000 0x1000
 168                                 0xe120000 0x3f000>;
 169                         interrupt-parent = <&icu0>;
 170                         interrupts = <39>;
 171                         dr_mode = "host";
 172                         phys = <&usb_phy>;
 173                         phy-names = "usb2-phy";
 174                         status = "disabled";
 175                 };
 176
 177                 dma0: dma@e104100 {
 178                         compatible = "lantiq,dma-xway";
 179                         reg = <0xe104100 0x800>;
 180                 };
 181
 182                 ebu0: ebu@e105300 {
 183                         compatible = "lantiq,ebu-xway";
 184                         reg = <0xe105300 0x100>;
 185                 };
 186
 187                 ppe@e234000 {
 188                         compatible = "lantiq,ppe-ase";
 189                         reg = <0xe234000 0x40000>;
 190                         interrupt-parent = <&icu0>;
 191                         interrupts = <85>;
 192                 };
 193
 194                 gsw: etop@e180000 {
 195                         compatible = "lantiq,etop-xway";
 196                         reg = <0xe180000 0x40000>;
 197                         interrupt-parent = <&icu0>;
 198                         interrupts = <105 109>;
 199                 };
 200         };
 201
 202         adsl {
 203                 compatible = "lantiq,adsl-ase";
 204         };
 205 };