target/linux/kirkwood/image/Makefile

   1 # SPDX-License-Identifier: GPL-2.0-only
   2 #
   3 # Copyright (C) 2009-2013 OpenWrt.org
   4
   5 include $(TOPDIR)/rules.mk
   6 include $(INCLUDE_DIR)/image.mk
   7
   8 KERNEL_LOADADDR:=0x8000
   9
  10 # Some info about Ctera firmware:
  11 # 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
  12 # 2. It contains two images: kernel and romdisk. Both are required.
  13 # 3. Every image has header and trailer file.
  14 # 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
  15 # 5. In header file are some strings used to describe image. It was decoded from
  16 #    factory image.
  17 # 6. Version format in header file is restricted by Original FW.
  18 # 7. Trailer file contains MD5 sum string of header and image file.
  19 # 8. Firmware file must have <=24MB size.
  20
  21 define Build/ctera-firmware
  22         mkdir -p $@.tmp
  23
  24         # Prepare header and trailer file for kernel
  25         echo "# CTera firmware information file" > $@.tmp/header
  26         echo "image_type=kernel" >> $@.tmp/header
  27         echo "arch=Kirkwood" >> $@.tmp/header
  28         echo "board=Any" >> $@.tmp/header
  29         echo "version=3.1.22.30669" >> $@.tmp/header
  30         echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
  31         echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
  32                 >> $@.tmp/header
  33
  34         cp $@ $@.tmp/kernel
  35
  36         echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
  37                 > $@.tmp/trailer
  38
  39         tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
  40                 -H gnu -C $@.tmp -cf $@.tar header kernel trailer
  41
  42         # Prepare header and trailer file for fake romdisk
  43         echo "# CTera firmware information file" > $@.tmp/header
  44         echo "image_type=romdisk" >> $@.tmp/header
  45         echo "initrd=yes" >> $@.tmp/header
  46         echo "arch=Kirkwood" >> $@.tmp/header
  47         echo "board=Any" >> $@.tmp/header
  48         echo "version=3.1.22.30669" >> $@.tmp/header
  49         echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
  50                 >> $@.tmp/header
  51
  52         rm -f $@
  53         touch $@
  54         $(call Build/append-uImage-fakehdr, ramdisk)
  55         cp $@ $@.tmp/romdisk
  56
  57         echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
  58                 > $@.tmp/trailer
  59
  60         tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
  61                 -H gnu -C $@.tmp -rf $@.tar header romdisk trailer
  62
  63         mv $@.tar $@
  64         rm -rf $@.tmp
  65 endef
  66
  67 define Device/kernel-size-migration
  68   DEVICE_COMPAT_VERSION := 2.0
  69   DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \
  70         older versions (up to 21.02) due to kernel size restrictions. \
  71         Upgrade via sysupgrade mechanism is not possible, so new \
  72         installation via factory style image is required.
  73 endef
  74
  75 define Device/Default
  76   PROFILES := Default
  77   DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
  78   KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  79   KERNEL := kernel-bin | append-dtb | uImage none
  80   KERNEL_NAME := zImage
  81   KERNEL_SUFFIX  := -uImage
  82   KERNEL_IN_UBI := 1
  83
  84   PAGESIZE := 2048
  85   SUBPAGESIZE := 512
  86   BLOCKSIZE := 128k
  87   IMAGES := sysupgrade.bin factory.bin
  88   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  89   IMAGE/factory.bin := append-ubi
  90 endef
  91
  92 define Device/checkpoint_l-50
  93   DEVICE_VENDOR := Check Point
  94   DEVICE_MODEL := L-50
  95   DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
  96         kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-mbedtls
  97   IMAGES := sysupgrade.bin
  98 endef
  99 TARGET_DEVICES += checkpoint_l-50
 100
 101 define Device/cisco_on100
 102   DEVICE_VENDOR := Cisco Systems
 103   DEVICE_MODEL := ON100
 104   KERNEL_SIZE := 5376k
 105   KERNEL_IN_UBI :=
 106   UBINIZE_OPTS := -E 5
 107   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 108   DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
 109   SUPPORTED_DEVICES += on100
 110 endef
 111 TARGET_DEVICES += cisco_on100
 112
 113 define Device/cloudengines_pogoe02
 114   DEVICE_VENDOR := Cloud Engines
 115   DEVICE_MODEL := Pogoplug E02
 116   DEVICE_DTS := kirkwood-pogo_e02
 117   DEVICE_PACKAGES := kmod-rtc-mv
 118   SUPPORTED_DEVICES += pogo_e02
 119 endef
 120 TARGET_DEVICES += cloudengines_pogoe02
 121
 122 define Device/cloudengines_pogoplugv4
 123   DEVICE_VENDOR := Cloud Engines
 124   DEVICE_MODEL := Pogoplug V4
 125   DEVICE_DTS := kirkwood-pogoplug-series-4
 126   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
 127         kmod-gpio-button-hotplug kmod-rtc-mv
 128 endef
 129 TARGET_DEVICES += cloudengines_pogoplugv4
 130
 131 define Device/ctera_c200-v1
 132   DEVICE_VENDOR := Ctera
 133   DEVICE_MODEL := C200
 134   DEVICE_VARIANT := V1
 135   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
 136         kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
 137   KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
 138   KERNEL_IN_UBI :=
 139   KERNEL_SUFFIX := -factory.firm
 140   IMAGES := sysupgrade.bin
 141 endef
 142 TARGET_DEVICES += ctera_c200-v1
 143
 144 define Device/endian_4i-edge-200
 145   DEVICE_VENDOR := Endian
 146   DEVICE_MODEL := 4i Edge 200
 147   DEVICE_ALT0_VENDOR := Endian
 148   DEVICE_ALT0_MODEL := UTM Mini Firewall
 149   DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-mbedtls kmod-rtc-mv
 150   KERNEL_SIZE := 4096k
 151   IMAGES := sysupgrade.bin
 152 endef
 153 TARGET_DEVICES += endian_4i-edge-200
 154
 155 define Device/globalscale_sheevaplug
 156   DEVICE_VENDOR := Globalscale
 157   DEVICE_MODEL := Sheevaplug
 158   DEVICE_PACKAGES := kmod-mvsdio kmod-rtc-mv
 159 endef
 160 TARGET_DEVICES += globalscale_sheevaplug
 161
 162 define Device/iom_iconnect-1.1
 163   DEVICE_VENDOR := Iomega
 164   DEVICE_MODEL := Iconnect
 165   DEVICE_PACKAGES := kmod-rtc-mv
 166   DEVICE_DTS := kirkwood-iconnect
 167   SUPPORTED_DEVICES += iconnect
 168 endef
 169 TARGET_DEVICES += iom_iconnect-1.1
 170
 171 define Device/iom_ix2-200
 172   DEVICE_VENDOR := Iomega
 173   DEVICE_MODEL := StorCenter ix2-200
 174   DEVICE_DTS := kirkwood-iomega_ix2_200
 175   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 176         kmod-gpio-button-hotplug kmod-hwmon-lm63 kmod-rtc-mv
 177   PAGESIZE := 512
 178   SUBPAGESIZE := 256
 179   BLOCKSIZE := 16k
 180   KERNEL_SIZE := 3072k
 181   KERNEL_IN_UBI :=
 182   UBINIZE_OPTS := -E 5
 183   IMAGE_SIZE := 31744k
 184   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 185         check-size
 186 endef
 187 TARGET_DEVICES += iom_ix2-200
 188
 189 define Device/iom_ix4-200d
 190   DEVICE_VENDOR := Iomega
 191   DEVICE_MODEL := StorCenter ix4-200d
 192   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 193         kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \
 194         kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio kmod-rtc-mv
 195   PAGESIZE := 512
 196   SUBPAGESIZE := 256
 197   BLOCKSIZE := 16k
 198   KERNEL_SIZE := 3072k
 199   KERNEL_IN_UBI :=
 200   UBINIZE_OPTS := -E 5
 201   IMAGE_SIZE := 31744k
 202   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
 203         check-size
 204 endef
 205 TARGET_DEVICES += iom_ix4-200d
 206
 207 define Device/iptime_nas1
 208   DEVICE_VENDOR := ipTIME
 209   DEVICE_MODEL := NAS1
 210   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 211         kmod-gpio-button-hotplug kmod-gpio-pca953x kmod-hwmon-drivetemp \
 212         kmod-hwmon-gpiofan kmod-usb-ledtrig-usbport kmod-rtc-mv kmod-thermal \
 213   -uboot-envtools
 214   KERNEL := $$(KERNEL) | iptime-naspkg nas1
 215   BLOCKSIZE := 256k
 216   IMAGE_SIZE := 15872k
 217   IMAGES := sysupgrade.bin
 218   IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 219         check-size | append-metadata
 220 endef
 221 TARGET_DEVICES += iptime_nas1
 222
 223 define Device/linksys
 224   DEVICE_VENDOR := Linksys
 225   DEVICE_PACKAGES := kmod-mwl8k wpad-basic-mbedtls kmod-gpio-button-hotplug \
 226         kmod-rtc-mv
 227   KERNEL_IN_UBI :=
 228   UBINIZE_OPTS := -E 5
 229   IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
 230 endef
 231
 232 define Device/linksys_e4200-v2
 233   $(Device/linksys)
 234   $(Device/kernel-size-migration)
 235   DEVICE_MODEL := E4200
 236   DEVICE_VARIANT := v2
 237   KERNEL_SIZE := 3072k
 238   SUPPORTED_DEVICES += linksys,viper linksys-viper
 239 endef
 240 TARGET_DEVICES += linksys_e4200-v2
 241
 242 define Device/linksys_ea3500
 243   $(Device/linksys)
 244   $(Device/kernel-size-migration)
 245   DEVICE_MODEL := EA3500
 246   PAGESIZE := 512
 247   SUBPAGESIZE := 256
 248   BLOCKSIZE := 16k
 249   KERNEL_SIZE := 3072k
 250   SUPPORTED_DEVICES += linksys,audi linksys-audi
 251 endef
 252 TARGET_DEVICES += linksys_ea3500
 253
 254 define Device/linksys_ea4500
 255   $(Device/linksys)
 256   $(Device/kernel-size-migration)
 257   DEVICE_MODEL := EA4500
 258   KERNEL_SIZE := 3072k
 259   SUPPORTED_DEVICES += linksys,viper linksys-viper
 260 endef
 261 TARGET_DEVICES += linksys_ea4500
 262
 263 define Device/netgear_readynas-duo-v2
 264   DEVICE_VENDOR := NETGEAR
 265   DEVICE_MODEL := ReadyNAS Duo
 266   DEVICE_VARIANT := v2
 267   DEVICE_DTS := kirkwood-netgear_readynas_duo_v2
 268   KERNEL_IN_UBI :=
 269   IMAGES := sysupgrade.bin
 270   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 271         kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3
 272 endef
 273 TARGET_DEVICES += netgear_readynas-duo-v2
 274
 275 define Device/netgear_stora
 276   DEVICE_VENDOR := Netgear
 277   DEVICE_MODEL := Stora (MS2000/2110)
 278   DEVICE_DTS := kirkwood-stora
 279   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 280         kmod-rtc-pcf8563 kmod-hwmon-lm75 kmod-hwmon-tc654 \
 281         kmod-gpio-button-hotplug
 282 endef
 283 TARGET_DEVICES += netgear_stora
 284
 285 define Device/raidsonic_ib-nas62x0
 286   DEVICE_VENDOR := RaidSonic
 287   DEVICE_MODEL := ICY BOX IB-NAS62x0
 288   DEVICE_DTS := kirkwood-ib62x0
 289   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
 290   SUPPORTED_DEVICES += ib62x0
 291 endef
 292 TARGET_DEVICES += raidsonic_ib-nas62x0
 293
 294 define Device/seagate_blackarmor-nas220
 295   DEVICE_VENDOR := Seagate
 296   DEVICE_MODEL := Blackarmor NAS220
 297   DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
 298         mdadm kmod-gpio-button-hotplug kmod-rtc-mv
 299   PAGESIZE := 512
 300   SUBPAGESIZE := 256
 301   BLOCKSIZE := 16k
 302   UBINIZE_OPTS := -e 1
 303 endef
 304 TARGET_DEVICES += seagate_blackarmor-nas220
 305
 306 define Device/seagate_dockstar
 307   DEVICE_VENDOR := Seagate
 308   DEVICE_MODEL := FreeAgent Dockstar
 309   DEVICE_PACKAGES := kmod-rtc-mv
 310   SUPPORTED_DEVICES += dockstar
 311 endef
 312 TARGET_DEVICES += seagate_dockstar
 313
 314 define Device/seagate_goflexnet
 315   DEVICE_VENDOR := Seagate
 316   DEVICE_MODEL := GoFlexNet
 317   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
 318   SUPPORTED_DEVICES += goflexnet
 319 endef
 320 TARGET_DEVICES += seagate_goflexnet
 321
 322 define Device/seagate_goflexhome
 323   DEVICE_VENDOR := Seagate
 324   DEVICE_MODEL := GoFlexHome
 325   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-rtc-mv
 326   SUPPORTED_DEVICES += goflexhome
 327 endef
 328 TARGET_DEVICES += seagate_goflexhome
 329
 330 define Device/zyxel_nsa310b
 331   DEVICE_VENDOR := ZyXEL
 332   DEVICE_MODEL := NSA310b
 333   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
 334         kmod-gpio-button-hotplug kmod-hwmon-lm85 kmod-rtc-mv
 335   SUPPORTED_DEVICES += nsa310b
 336 endef
 337 TARGET_DEVICES += zyxel_nsa310b
 338
 339 define Device/zyxel_nsa310s
 340   DEVICE_VENDOR := ZyXEL
 341   DEVICE_MODEL := NSA310S
 342   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
 343 endef
 344 TARGET_DEVICES += zyxel_nsa310s
 345
 346 define Device/zyxel_nsa325
 347   DEVICE_VENDOR := ZyXEL
 348   DEVICE_MODEL := NSA325
 349   DEVICE_VARIANT := v1/v2
 350   DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
 351         kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
 352   SUPPORTED_DEVICES += nsa325
 353 endef
 354 TARGET_DEVICES += zyxel_nsa325
 355
 356 $(eval $(call BuildImage))