target/linux/kirkwood/base-files/etc/board.d/02_network

   1 #
   2 # Copyright (C) 2012-2015 OpenWrt.org
   3 #
   4
   5 . /lib/functions/uci-defaults.sh
   6 . /lib/functions/system.sh
   7
   8 kirkwood_setup_interfaces()
   9 {
  10         local board="$1"
  11
  12         case "$board" in
  13         checkpoint,l-50)
  14                 ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5 lan6 lan7 lan8 dmz" "eth0"
  15                 ;;
  16         cisco,on100)
  17                 ucidef_set_interface_lan "eth0 eth1"
  18                 ;;
  19         cloudengines,pogoe02|\
  20         cloudengines,pogoplugv4|\
  21         ctera,c200-v1|\
  22         globalscale,sheevaplug|\
  23         iom,iconnect-1.1|\
  24         iom,ix2-200|\
  25         iptime,nas1|\
  26         netgear,readynas-duo-v2|\
  27         netgear,stora|\
  28         raidsonic,ib-nas62x0|\
  29         seagate,blackarmor-nas220|\
  30         seagate,dockstar|\
  31         seagate,goflexhome|\
  32         seagate,goflexnet|\
  33         zyxel,nsa310b|\
  34         zyxel,nsa310s|\
  35         zyxel,nsa325)
  36                 ucidef_set_interface_lan "eth0" "dhcp"
  37                 ;;
  38         endian,4i-edge-200)
  39                 ucidef_set_interface_lan "port1 port2 port3 port4 eth1"
  40                 ;;
  41         iom,ix4-200d)
  42                 ucidef_set_interface_lan "eth0 eth1" "dhcp"
  43                 ;;
  44         linksys,e4200-v2|\
  45         linksys,ea3500|\
  46         linksys,ea4500)
  47                 ucidef_set_interfaces_lan_wan "ethernet1 ethernet2 ethernet3 ethernet4" "internet"
  48                 ;;
  49         *)
  50                 ucidef_set_interface_lan "eth0"
  51                 ;;
  52         esac
  53 }
  54
  55 kirkwood_setup_macs()
  56 {
  57         local board="$1"
  58         local lan_mac=""
  59         local wan_mac=""
  60         local label_mac=""
  61
  62         case "$board" in
  63         iptime,nas1)
  64                 lan_mac=$(mtd_get_mac_binary u-boot 0x3ffa8)
  65                 label_mac=$lan_mac
  66                 ;;
  67         linksys,e4200-v2|\
  68         linksys,ea3500|\
  69         linksys,ea4500)
  70                 wan_mac=$(mtd_get_mac_ascii u_env eth1addr)
  71                 ;;
  72         zyxel,nsa310b|\
  73         zyxel,nsa325)
  74                 lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  75                 ;;
  76         esac
  77
  78         [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
  79         [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
  80         [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
  81 }
  82
  83 board_config_update
  84 board=$(board_name)
  85 kirkwood_setup_interfaces $board
  86 kirkwood_setup_macs $board
  87 board_config_flush
  88
  89 exit 0