target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-mf18a.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 // Copyright (c) 2022, Pawel Dembicki <paweldembicki@gmail.com>.
   3 // Copyright (c) 2022, Marcin Gajda <mgajda@o2.pl>.
   4
   5
   6 #include "qcom-ipq4019.dtsi"
   7 #include <dt-bindings/soc/qcom,tcsr.h>
   8 #include <dt-bindings/gpio/gpio.h>
   9 #include <dt-bindings/input/input.h>
  10 #include <dt-bindings/leds/common.h>
  11
  12 / {
  13         model = "ZTE MF18A";
  14         compatible = "zte,mf18a";
  15
  16         aliases {
  17                 led-boot = &led_power;
  18                 led-failsafe = &led_power;
  19                 led-running = &led_power;
  20                 led-upgrade = &led_power;
  21         };
  22
  23         chosen {
  24                 /*
  25                  * bootargs forced by u-boot bootipq command:
  26                  * 'ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait'
  27                  */
  28                 bootargs-append = " root=/dev/ubiblock0_1";
  29         };
  30
  31         gpio-restart {
  32                 compatible = "gpio-restart";
  33                 gpios = <&tlmm 8 GPIO_ACTIVE_HIGH>;
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 led_internal: led-0 {
  40                         label = "blue:internal";
  41                         gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
  42                         default-state = "keep";
  43                 };
  44
  45                 led_power: led-1 {
  46                         function = LED_FUNCTION_POWER;
  47                         color = <LED_COLOR_ID_BLUE>;
  48                         gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
  49                         default-state = "keep";
  50                 };
  51
  52                 led-2 {
  53                         function = LED_FUNCTION_WLAN;
  54                         color = <LED_COLOR_ID_BLUE>;
  55                         gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58
  59                 led-3 {
  60                         function = LED_FUNCTION_WLAN;
  61                         color = <LED_COLOR_ID_RED>;
  62                         gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
  63                 };
  64
  65                 led-4 {
  66                         function = LED_FUNCTION_WLAN;
  67                         label = "blue:smart";
  68                         gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
  69                         linux,default-trigger = "phy1tpt";
  70                 };
  71
  72                 led-5 {
  73                         label = "red:smart";
  74                         gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
  75                 };
  76
  77                 resetzwave {
  78                         label = "resetzwave";
  79                         gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
  80                 };
  81         };
  82
  83         keys {
  84                 compatible = "gpio-keys";
  85
  86                 reset {
  87                         label = "reset";
  88                         linux,code = <KEY_RESTART>;
  89                         gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 wps {
  93                         label = "wps";
  94                         linux,code = <KEY_WPS_BUTTON>;
  95                         gpios = <&tlmm 68 GPIO_ACTIVE_LOW>;
  96                 };
  97         };
  98
  99         soc {
 100                 rng@22000 {
 101                         status = "okay";
 102                 };
 103
 104                 mdio@90000 {
 105                         status = "okay";
 106                         pinctrl-0 = <&mdio_pins>;
 107                         pinctrl-names = "default";
 108                         reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
 109                         reset-delay-us = <2000>;
 110                 };
 111
 112                 tcsr@1949000 {
 113                         compatible = "qcom,tcsr";
 114                         reg = <0x1949000 0x100>;
 115                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
 116                 };
 117
 118                 tcsr@194b000 {
 119                         /* select hostmode */
 120                         compatible = "qcom,tcsr";
 121                         reg = <0x194b000 0x100>;
 122                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
 123                         status = "okay";
 124                 };
 125
 126                 ess_tcsr@1953000 {
 127                         compatible = "qcom,tcsr";
 128                         reg = <0x1953000 0x1000>;
 129                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
 130                 };
 131
 132                 tcsr@1957000 {
 133                         compatible = "qcom,tcsr";
 134                         reg = <0x1957000 0x100>;
 135                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
 136                 };
 137
 138                 usb2@60f8800 {
 139                         status = "okay";
 140                 };
 141
 142                 usb3@8af8800 {
 143                         status = "okay";
 144                 };
 145
 146                 crypto@8e3a000 {
 147                         status = "okay";
 148                 };
 149
 150                 watchdog@b017000 {
 151                         status = "okay";
 152                 };
 153         };
 154 };
 155
 156 &blsp_dma {
 157         status = "okay";
 158 };
 159
 160 &blsp1_spi1 {
 161         pinctrl-0 = <&spi_0_pins>;
 162         pinctrl-names = "default";
 163         status = "okay";
 164         cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 165
 166         flash@0 {
 167                 /* u-boot is looking for "n25q128a11" property */
 168                 compatible = "jedec,spi-nor", "n25q128a11";
 169                 #address-cells = <1>;
 170                 #size-cells = <1>;
 171                 reg = <0>;
 172                 spi-max-frequency = <24000000>;
 173
 174                 partitions {
 175                         compatible = "fixed-partitions";
 176                         #address-cells = <1>;
 177                         #size-cells = <1>;
 178
 179                         partition@0 {
 180                                 label = "0:SBL1";
 181                                 reg = <0x0 0x40000>;
 182                                 read-only;
 183                         };
 184
 185                         partition@40000 {
 186                                 label = "0:MIBIB";
 187                                 reg = <0x40000 0x20000>;
 188                                 read-only;
 189                         };
 190
 191                         partition@60000 {
 192                                 label = "0:QSEE";
 193                                 reg = <0x60000 0x60000>;
 194                                 read-only;
 195                                 };
 196
 197                         partition@c0000 {
 198                                 label = "0:CDT";
 199                                 reg = <0xc0000 0x10000>;
 200                                 read-only;
 201                         };
 202
 203                         partition@d0000 {
 204                                 label = "0:DDRPARAMS";
 205                                 reg = <0xd0000 0x10000>;
 206                                 read-only;
 207                         };
 208
 209                         partition@e0000 {
 210                                 label = "0:APPSBLENV";
 211                                 reg = <0xe0000 0x10000>;
 212                                 read-only;
 213                         };
 214
 215                         partition@f0000 {
 216                                 label = "0:APPSBL";
 217                                 reg = <0xf0000 0xc0000>;
 218                                 read-only;
 219                         };
 220
 221                         partition@1b0000 {
 222                                 label = "0:reserved1";
 223                                 reg = <0x1b0000 0x50000>;
 224                                 read-only;
 225                         };
 226                 };
 227         };
 228 };
 229
 230 &blsp1_uart1 {
 231         pinctrl-0 = <&serial_pins>;
 232         pinctrl-names = "default";
 233         status = "okay";
 234 };
 235
 236 &cryptobam {
 237         status = "okay";
 238 };
 239
 240 &gmac {
 241         status = "okay";
 242         nvmem-cell-names = "mac-address";
 243         nvmem-cells = <&macaddr_config_0 0>;
 244 };
 245
 246 &switch {
 247         status = "okay";
 248 };
 249
 250 &swport2 {
 251         status = "okay";
 252
 253         label = "wan";
 254
 255         nvmem-cell-names = "mac-address";
 256         nvmem-cells = <&macaddr_config_0 1>;
 257 };
 258
 259 &swport3 {
 260         status = "okay";
 261
 262         label = "lan";
 263 };
 264
 265 &nand {
 266         pinctrl-0 = <&nand_pins>;
 267         pinctrl-names = "default";
 268         status = "okay";
 269
 270         nand@0 {
 271                 partitions {
 272                         compatible = "fixed-partitions";
 273                         #address-cells = <1>;
 274                         #size-cells = <1>;
 275
 276                         partition@0 {
 277                                 label = "fota-flag";
 278                                 reg = <0x0 0xa0000>;
 279                                 read-only;
 280                         };
 281
 282                         partition@a0000 {
 283                                 label = "ART";
 284                                 reg = <0xa0000 0x80000>;
 285                                 read-only;
 286
 287                                 nvmem-layout {
 288                                         compatible = "fixed-layout";
 289                                         #address-cells = <1>;
 290                                         #size-cells = <1>;
 291
 292                                         precal_art_1000: precal@1000 {
 293                                                 reg = <0x1000 0x2f20>;
 294                                         };
 295
 296                                         precal_art_9000: precal@9000 {
 297                                                 reg = <0x9000 0x2f20>;
 298                                         };
 299                                 };
 300                         };
 301
 302                         partition@120000 {
 303                                 label = "mac";
 304                                 reg = <0x120000 0x80000>;
 305                                 read-only;
 306
 307                                 nvmem-layout {
 308                                         compatible = "fixed-layout";
 309                                         #address-cells = <1>;
 310                                         #size-cells = <1>;
 311
 312                                         macaddr_config_0: macaddr@0 {
 313                                                 compatible = "mac-base";
 314                                                 reg = <0x0 0x6>;
 315                                                 #nvmem-cell-cells = <1>;
 316                                         };
 317                                 };
 318                         };
 319
 320                         partition@1a0000 {
 321                                 label = "reserved2";
 322                                 reg = <0x1a0000 0xc0000>;
 323                                 read-only;
 324                         };
 325
 326                         partition@260000 {
 327                                 label = "cfg-param";
 328                                 reg = <0x260000 0x400000>;
 329                                 read-only;
 330                         };
 331
 332                         partition@660000 {
 333                                 label = "log";
 334                                 reg = <0x660000 0x400000>;
 335                         };
 336
 337                         partition@a60000 {
 338                                 label = "oops";
 339                                 reg = <0xa60000 0xa0000>;
 340                         };
 341
 342                         partition@b00000 {
 343                                 label = "reserved3";
 344                                 reg = <0xb00000 0x500000>;
 345                                 read-only;
 346                         };
 347
 348                         partition@1000000 {
 349                                 label = "web";
 350                                 reg = <0x1000000 0x800000>;
 351                         };
 352
 353                         partition@1800000 {
 354                                 label = "rootfs";
 355                                 reg = <0x1800000 0x1d00000>;
 356                         };
 357
 358                         partition@3500000 {
 359                                 label = "data";
 360                                 reg = <0x3500000 0x1900000>;
 361                         };
 362
 363                         partition@4e00000 {
 364                                 label = "fota";
 365                                 reg = <0x4e00000 0x2800000>;
 366
 367                         };
 368                         partition@7600000 {
 369                                 label = "iot-db";
 370                                 reg = <0x7600000 0xa00000>;
 371                         };
 372                 };
 373         };
 374 };
 375
 376 &qpic_bam {
 377         status = "okay";
 378 };
 379
 380 &tlmm {
 381         i2c_0_pins: i2c_0_pinmux {
 382                 mux {
 383                         pins = "gpio20", "gpio21";
 384                         function = "blsp_i2c0";
 385                         bias-disable;
 386                 };
 387         };
 388
 389         mdio_pins: mdio_pinmux {
 390                 mux_1 {
 391                         pins = "gpio6";
 392                         function = "mdio";
 393                         bias-pull-up;
 394                 };
 395
 396                 mux_2 {
 397                         pins = "gpio7";
 398                         function = "mdc";
 399                         bias-pull-up;
 400                 };
 401         };
 402
 403         nand_pins: nand_pins {
 404                 pullups {
 405                         pins =  "gpio52", "gpio53", "gpio58",
 406                                 "gpio59";
 407                         function = "qpic";
 408                         bias-pull-up;
 409                 };
 410
 411                 pulldowns {
 412                         pins =  "gpio54", "gpio55", "gpio56",
 413                                 "gpio57", "gpio60",
 414                                 "gpio62", "gpio63", "gpio64",
 415                                 "gpio65", "gpio66", "gpio67",
 416                                 "gpio69";
 417                         function = "qpic";
 418                         bias-pull-down;
 419                 };
 420         };
 421
 422         serial_pins: serial_pinmux {
 423                 mux {
 424                         pins = "gpio16", "gpio17";
 425                         function = "blsp_uart0";
 426                         bias-disable;
 427                 };
 428         };
 429
 430         spi_0_pins: spi_0_pinmux {
 431                 pinmux {
 432                         function = "blsp_spi0";
 433                         pins = "gpio13", "gpio14", "gpio15";
 434                         drive-strength = <12>;
 435                         bias-disable;
 436                 };
 437
 438                 pinmux_cs {
 439                         function = "gpio";
 440                         pins = "gpio12";
 441                         drive-strength = <2>;
 442                         bias-disable;
 443                         output-high;
 444                 };
 445         };
 446 };
 447
 448 &usb2_hs_phy {
 449         status = "okay";
 450 };
 451
 452 &usb3_ss_phy {
 453         status = "okay";
 454 };
 455
 456 &usb3_hs_phy {
 457         status = "okay";
 458 };
 459
 460 &wifi0 {
 461         status = "okay";
 462         nvmem-cell-names = "pre-calibration", "mac-address";
 463         nvmem-cells = <&precal_art_1000>, <&macaddr_config_0 2>;
 464         qcom,ath10k-calibration-variant = "ZTE-MF18A";
 465 };
 466
 467 //* This node is used for 5Ghz on QCA9982 */
 468 &pcie0 {
 469         status = "okay";
 470         perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
 471         wake-gpio = <&tlmm 40 GPIO_ACTIVE_LOW>;
 472         clkreq-gpio = <&tlmm 39 GPIO_ACTIVE_LOW>;
 473
 474         bridge@0,0 {
 475                 reg = <0x00000000 0 0 0 0>;
 476                 #address-cells = <3>;
 477                 #size-cells = <2>;
 478                 ranges;
 479
 480                 wifi2: wifi@1,0 {
 481                         compatible = "pci168c,0040";
 482                         nvmem-cell-names = "pre-calibration", "mac-address";
 483                         nvmem-cells = <&precal_art_9000>, <&macaddr_config_0 3>;
 484                         qcom,ath10k-calibration-variant = "ZTE-MF18A";
 485                         reg = <0x00010000 0 0 0 0>;
 486                 };
 487         };
 488 };
 489
 490