target/linux/ipq40xx/files-6.1/arch/arm/boot/dts/qcom-ipq4019-hap-ac3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
   3
   4 #include "qcom-ipq4019.dtsi"
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/leds/common.h>
   8 #include <dt-bindings/soc/qcom,tcsr.h>
   9
  10 / {
  11         model = "MikroTik hAP ac3";
  12         compatible = "mikrotik,hap-ac3";
  13
  14         memory {
  15                 device_type = "memory";
  16                 reg = <0x80000000 0x10000000>;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         aliases {
  24                 led-boot = &led_status_blue;
  25                 led-failsafe = &led_status_red;
  26                 led-running = &led_status_blue;
  27                 led-upgrade = &led_status_red;
  28         };
  29
  30         soc {
  31                 rng@22000 {
  32                         status = "okay";
  33                 };
  34
  35                 counter@4a1000 {
  36                         compatible = "qcom,qca-gcnt";
  37                         reg = <0x4a1000 0x4>;
  38                 };
  39
  40                 tcsr@1949000 {
  41                         compatible = "qcom,tcsr";
  42                         reg = <0x1949000 0x100>;
  43                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  44                 };
  45
  46                 tcsr@194b000 {
  47                         /* select hostmode */
  48                         compatible = "qcom,tcsr";
  49                         reg = <0x194b000 0x100>;
  50                         qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
  51                         status = "okay";
  52                 };
  53
  54                 ess_tcsr@1953000 {
  55                         compatible = "qcom,tcsr";
  56                         reg = <0x1953000 0x1000>;
  57                         qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
  58                 };
  59
  60                 tcsr@1957000 {
  61                         compatible = "qcom,tcsr";
  62                         reg = <0x1957000 0x100>;
  63                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  64                 };
  65
  66                 usb2: usb2@60f8800 {
  67                         status = "okay";
  68                 };
  69
  70                 crypto@8e3a000 {
  71                         status = "okay";
  72                 };
  73
  74                 watchdog@b017000 {
  75                         status = "okay";
  76                 };
  77         };
  78
  79         keys {
  80                 compatible = "gpio-keys";
  81
  82                 reset {
  83                         label = "reset";
  84                         gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
  85                         linux,code = <KEY_RESTART>;
  86                 };
  87
  88                 mode {
  89                         label = "mode";
  90                         gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
  91                         linux,code = <KEY_RFKILL>;
  92                 };
  93
  94                 led {
  95                         label = "led";
  96                         gpios = <&tlmm 42 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_WPS_BUTTON>;
  98                 };
  99         };
 100
 101         leds {
 102                 compatible = "gpio-leds";
 103
 104                 led_status_blue: status-blue {
 105                         function = LED_FUNCTION_STATUS;
 106                         color = <LED_COLOR_ID_BLUE>;
 107                         gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
 108                 };
 109
 110                 led_status_red: status-red {
 111                         function = LED_FUNCTION_STATUS;
 112                         color = <LED_COLOR_ID_RED>;
 113                         gpios = <&tlmm 1 GPIO_ACTIVE_HIGH>;
 114                         panic-indicator;
 115                 };
 116
 117                 led_status_green: status-green {
 118                         function = LED_FUNCTION_STATUS;
 119                         color = <LED_COLOR_ID_GREEN>;
 120                         gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
 121                 };
 122
 123                 wlan {
 124                         function = LED_FUNCTION_WLAN;
 125                         color = <LED_COLOR_ID_GREEN>;
 126                         gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
 127                 };
 128
 129                 ethernet {
 130                         label = "green:ethernet";
 131                         gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
 132                 };
 133
 134                 wan {
 135                         function = LED_FUNCTION_WAN;
 136                         color = <LED_COLOR_ID_GREEN>;
 137                         gpios = <&tlmm 28 GPIO_ACTIVE_HIGH>;
 138                 };
 139
 140                 lan1 {
 141                         label = "green:lan1";
 142                         gpios = <&tlmm 29 GPIO_ACTIVE_HIGH>;
 143                 };
 144
 145                 lan2 {
 146                         label = "green:lan2";
 147                         gpios = <&tlmm 30 GPIO_ACTIVE_HIGH>;
 148                 };
 149
 150                 lan3 {
 151                         label = "green:lan3";
 152                         gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>;
 153                 };
 154
 155                 lan4 {
 156                         label = "green:lan4";
 157                         gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
 158                 };
 159
 160                 poe {
 161                         label = "red:poe";
 162                         gpios = <&tlmm 36 GPIO_ACTIVE_HIGH>;
 163                 };
 164         };
 165 };
 166
 167 &tlmm {
 168         serial_pins: serial_pinmux {
 169                 mux {
 170                         pins = "gpio16", "gpio17";
 171                         function = "blsp_uart0";
 172                         bias-disable;
 173                 };
 174         };
 175
 176         spi_0_pins: spi_0_pinmux {
 177                 pin {
 178                         function = "blsp_spi0";
 179                         pins = "gpio13", "gpio14", "gpio15";
 180                         drive-strength = <12>;
 181                         bias-disable;
 182                 };
 183
 184                 pin_cs {
 185                         function = "gpio";
 186                         pins = "gpio12";
 187                         drive-strength = <2>;
 188                         bias-disable;
 189                         output-high;
 190                 };
 191         };
 192
 193         nand_pins: nand_pins {
 194                 pullups {
 195                         pins = "gpio53", "gpio58", "gpio59";
 196                         function = "qpic";
 197                         bias-pull-up;
 198                 };
 199
 200                 pulldowns {
 201                         pins = "gpio55", "gpio56", "gpio57", "gpio60",
 202                                    "gpio62", "gpio63", "gpio64", "gpio65",
 203                                    "gpio66", "gpio67", "gpio68", "gpio69";
 204                         function = "qpic";
 205                         bias-pull-down;
 206                 };
 207         };
 208
 209         enable-usb-power {
 210                 gpio-hog;
 211                 gpios = <44 GPIO_ACTIVE_HIGH>;
 212                 output-high;
 213                 line-name = "enable USB power";
 214         };
 215 };
 216
 217 &blsp_dma {
 218         status = "okay";
 219 };
 220
 221 &blsp1_spi1 {
 222         status = "okay";
 223
 224         pinctrl-0 = <&spi_0_pins>;
 225         pinctrl-names = "default";
 226         cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 227
 228         flash@0 {
 229                 reg = <0>;
 230                 compatible = "jedec,spi-nor";
 231                 spi-max-frequency = <40000000>;
 232
 233                 partitions {
 234                         compatible = "fixed-partitions";
 235                         #address-cells = <1>;
 236                         #size-cells = <1>;
 237
 238                         partition@0 {
 239                                 label = "Qualcomm";
 240                                 reg = <0x0 0x80000>;
 241                                 read-only;
 242                         };
 243
 244                         partition@80000 {
 245                                 compatible = "mikrotik,routerboot-partitions";
 246                                 #address-cells = <1>;
 247                                 #size-cells = <1>;
 248                                 label = "RouterBoot";
 249                                 reg = <0x80000 0x80000>;
 250
 251                                 hard_config {
 252                                         read-only;
 253                                         size = <0x2000>;
 254                                 };
 255
 256                                 dtb_config {
 257                                         read-only;
 258                                 };
 259
 260                                 soft_config {
 261                                 };
 262                         };
 263                 };
 264         };
 265 };
 266
 267 &qpic_bam {
 268         status = "okay";
 269 };
 270
 271 &nand {
 272         status = "okay";
 273
 274         pinctrl-0 = <&nand_pins>;
 275         pinctrl-names = "default";
 276
 277         nand@0 {
 278                 partitions {
 279                         compatible = "fixed-partitions";
 280                         #address-cells = <1>;
 281                         #size-cells = <1>;
 282
 283                         partition@0 {
 284                                 label = "kernel";
 285                                 reg = <0x0 0xa00000>;
 286                         };
 287
 288                         partition@a00000 {
 289                                 label = "ubi";
 290                                 reg = <0xa00000 0x7600000>;
 291                         };
 292                 };
 293         };
 294 };
 295
 296 &blsp1_uart1 {
 297         status = "okay";
 298
 299         pinctrl-0 = <&serial_pins>;
 300         pinctrl-names = "default";
 301 };
 302
 303 &cryptobam {
 304         status = "okay";
 305 };
 306
 307 &usb2_hs_phy {
 308         status = "okay";
 309 };
 310
 311 &mdio {
 312         status = "okay";
 313 };
 314
 315 &gmac {
 316         status = "okay";
 317 };
 318
 319 &switch {
 320         status = "okay";
 321 };
 322
 323 &swport1 {
 324         status = "okay";
 325         label = "lan4";
 326 };
 327
 328 &swport2 {
 329         status = "okay";
 330         label = "lan3";
 331 };
 332
 333 &swport3 {
 334         status = "okay";
 335         label = "lan2";
 336 };
 337
 338 &swport4 {
 339         status = "okay";
 340         label = "lan1";
 341 };
 342
 343 &swport5 {
 344         status = "okay";
 345 };
 346
 347 &wifi0 {
 348         status = "okay";
 349
 350         qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
 351 };
 352
 353 &wifi1 {
 354         status = "okay";
 355
 356         qcom,ath10k-calibration-variant = "MikroTik-hAP-ac3";
 357 };