target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33 |\
  13         meraki,mr74)
  14                 caldata_extract_ubi "ART" 0x9000 0x844
  15                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         asus,rt-ac42u)
  27                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  28                 ;;
  29         avm,fritzrepeater-3000)
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  33                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  34                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  35                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  36                 ;;
  37         linksys,ea8300 |\
  38         linksys,mr8300)
  39                 caldata_extract "ART" 0x9000 0x2f20
  40                 # OEM assigns 4 sequential MACs
  41                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  42                 ;;
  43         linksys,whw03)
  44                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  45                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
  46                 ;;
  47         netgear,rbr40|\
  48         netgear,rbs40|\
  49         netgear,rbr50|\
  50         netgear,rbs50|\
  51         netgear,srr60|\
  52         netgear,srs60)
  53                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  54                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
  55                 ;;
  56         esac
  57         ;;
  58 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  59         case "$board" in
  60         asus,map-ac2200|\
  61         asus,rt-ac42u|\
  62         asus,rt-ac58u)
  63                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  64                 ;;
  65         avm,fritzbox-4040)
  66                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  67                 ;;
  68         avm,fritzbox-7530 |\
  69         avm,fritzrepeater-1200 |\
  70         avm,fritzrepeater-3000)
  71                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  72                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  73                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  77                 ;;
  78         cellc,rtl30vw)
  79                 caldata_extract "0:ART" 0x1000 0x2f20
  80                 ;;
  81         devolo,magic-2-wifi-next)
  82                 caldata_extract "ART" 0x1000 0x2f20
  83                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
  84                 ;;
  85         dlink,dap-2610)
  86                 caldata_extract "ART" 0x1000 0x2f20
  87                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
  88                 ;;
  89         engenius,emd1)
  90                 caldata_extract "0:ART" 0x1000 0x2f20
  91                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
  92                 ;;
  93         engenius,emr3500)
  94                 caldata_extract "0:ART" 0x1000 0x2f20
  95                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
  96                 ;;
  97         engenius,ens620ext)
  98                 caldata_extract "ART" 0x1000 0x2f20
  99                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 100                 ;;
 101         extreme-networks,ws-ap3915i |\
 102         extreme-networks,ws-ap391x)
 103                 caldata_extract "ART" 0x1000 0x2f20
 104                 ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
 105                 ;;
 106         linksys,ea8300 |\
 107         linksys,mr8300)
 108                 caldata_extract "ART" 0x1000 0x2f20
 109                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 110                 ;;
 111         linksys,whw03)
 112                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 113                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 1)
 114                 ;;
 115         meraki,mr33 |\
 116         meraki,mr74)
 117                 caldata_extract_ubi "ART" 0x1000 0x2f20
 118                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 119                 ;;
 120         mikrotik,cap-ac |\
 121         mikrotik,hap-ac2 |\
 122         mikrotik,hap-ac3 |\
 123         mikrotik,hap-ac3-lte6-kit |\
 124         mikrotik,wap-ac |\
 125         mikrotik,wap-ac-lte |\
 126         mikrotik,wap-r-ac)
 127                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 128                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 129                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 130                 ;;
 131         netgear,rbr40|\
 132         netgear,rbs40|\
 133         netgear,rbr50|\
 134         netgear,rbs50|\
 135         netgear,srr60|\
 136         netgear,srs60)
 137                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 138                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 139                 ;;
 140         pakedge,wr-1)
 141                 caldata_extract "0:ART" 0x1000 0x2f20
 142                 ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
 143                 ;;
 144         teltonika,rutx10|\
 145         teltonika,rutx50)
 146                 caldata_extract "0:ART" 0x1000 0x2f20
 147                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
 148                 ;;
 149         sony,ncp-hg100-cellular)
 150                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 151                 ;;
 152         zyxel,nbg6617 |\
 153         zyxel,wre6606)
 154                 caldata_extract "ART" 0x1000 0x2f20
 155                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 156                 ;;
 157         esac
 158         ;;
 159 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 160         case "$board" in
 161         asus,map-ac2200|\
 162         asus,rt-ac58u)
 163                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 164                 ;;
 165         avm,fritzbox-4040)
 166                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 167                 ;;
 168         avm,fritzbox-7530 |\
 169         avm,fritzrepeater-1200 |\
 170         avm,fritzrepeater-3000)
 171                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 172                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 173                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 174                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 175                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 176                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 177                 ;;
 178         cellc,rtl30vw)
 179                 caldata_extract "0:ART" 0x5000 0x2f20
 180                 ;;
 181         devolo,magic-2-wifi-next)
 182                 caldata_extract "ART" 0x5000 0x2f20
 183                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 184                 ;;
 185         dlink,dap-2610)
 186                 caldata_extract "ART" 0x5000 0x2f20
 187                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 188                 ;;
 189         engenius,emd1)
 190                 caldata_extract "0:ART" 0x5000 0x2f20
 191                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 192                 ;;
 193         engenius,emr3500)
 194                 caldata_extract "0:ART" 0x5000 0x2f20
 195                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 196                 ;;
 197         engenius,ens620ext)
 198                 caldata_extract "ART" 0x5000 0x2f20
 199                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 200                 ;;
 201         extreme-networks,ws-ap3915i |\
 202         extreme-networks,ws-ap391x)
 203                 caldata_extract "ART" 0x5000 0x2f20
 204                 ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
 205                 ;;
 206         linksys,ea8300 |\
 207         linksys,mr8300)
 208                 caldata_extract "ART" 0x5000 0x2f20
 209                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 210                 ;;
 211         linksys,whw03)
 212                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 213                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 214                 ;;
 215         meraki,mr33 |\
 216         meraki,mr74)
 217                 caldata_extract_ubi "ART" 0x5000 0x2f20
 218                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 219                 ;;
 220         mikrotik,cap-ac |\
 221         mikrotik,hap-ac2 |\
 222         mikrotik,hap-ac3 |\
 223         mikrotik,hap-ac3-lte6-kit |\
 224         mikrotik,sxtsq-5-ac |\
 225         mikrotik,wap-ac |\
 226         mikrotik,wap-ac-lte |\
 227         mikrotik,wap-r-ac)
 228                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 229                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 230                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 231                 ;;
 232         netgear,rbr40|\
 233         netgear,rbs40|\
 234         netgear,rbr50|\
 235         netgear,rbs50|\
 236         netgear,srr60|\
 237         netgear,srs60)
 238                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 239                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 240                 ;;
 241         pakedge,wr-1)
 242                 caldata_extract "0:ART" 0x5000 0x2f20
 243                 ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
 244                 ;;
 245         teltonika,rutx10|\
 246         teltonika,rutx50)
 247                 caldata_extract "0:ART" 0x5000 0x2f20
 248                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
 249                 ;;
 250         sony,ncp-hg100-cellular)
 251                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 252                 ;;
 253         zyxel,nbg6617 |\
 254         zyxel,wre6606)
 255                 caldata_extract "ART" 0x5000 0x2f20
 256                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 257                 ;;
 258         esac
 259         ;;
 260 "ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
 261         case "$board" in
 262         mikrotik,cap-ac |\
 263         mikrotik,hap-ac2 |\
 264         mikrotik,hap-ac3 |\
 265         mikrotik,hap-ac3-lte6-kit |\
 266         mikrotik,wap-ac |\
 267         mikrotik,wap-ac-lte |\
 268         mikrotik,wap-r-ac)
 269                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 270                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
 271                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
 272                 ;;
 273         esac
 274         ;;
 275 "ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
 276         case "$board" in
 277         mikrotik,cap-ac |\
 278         mikrotik,hap-ac2 |\
 279         mikrotik,hap-ac3 |\
 280         mikrotik,hap-ac3-lte6-kit |\
 281         mikrotik,sxtsq-5-ac |\
 282         mikrotik,wap-ac |\
 283         mikrotik,wap-ac-lte |\
 284         mikrotik,wap-r-ac)
 285                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 286                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
 287                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
 288                 ;;
 289         esac
 290         ;;
 291 *)
 292         exit 1
 293         ;;
 294 esac