target/linux/lantiq/files/arch/mips/boot/dts/DM200.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/mips/lantiq_rcu_gphy.h>
   7
   8 / {
   9         compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9";
  10         model = "Netgear DM200";
  11
  12         chosen {
  13                 bootargs = "console=ttyLTQ0,115200";
  14         };
  15
  16         aliases {
  17                 led-boot = &power_green;
  18                 led-failsafe = &power_amber;
  19                 led-running = &power_green;
  20                 led-upgrade = &power_green;
  21
  22                 led-dsl = &dsl_green;
  23         };
  24
  25         memory@0 {
  26                 device_type = "memory";
  27                 reg = <0x0 0x4000000>;
  28         };
  29
  30         gpio-keys-polled {
  31                 compatible = "gpio-keys-polled";
  32                 #address-cells = <1>;
  33                 #size-cells = <0>;
  34                 poll-interval = <100>;
  35                 reset {
  36                         label = "reset";
  37                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  38                         linux,code = <KEY_RESTART>;
  39                 };
  40         };
  41
  42         gpio_export {
  43                 compatible = "gpio-export";
  44                 #size-cells = <0>;
  45
  46                 annexa {
  47                         gpio-export,name = "annexa";
  48                         gpio-export,output = <0>;
  49                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  50                 };
  51                 annexb {
  52                         gpio-export,name = "annexb";
  53                         gpio-export,output = <0>;
  54                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  55                 };
  56         };
  57
  58         gpio-leds {
  59                 compatible = "gpio-leds";
  60
  61                 power_amber: power_amber {
  62                         label = "dm200:amber:power";
  63                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  64                 };
  65                 power_green: power_green {
  66                         label = "dm200:green:power";
  67                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  68                 };
  69
  70                 lan_amber {
  71                         label = "dm200:amber:lan";
  72                         gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
  73                 };
  74                 lan_green {
  75                         label = "dm200:green:lan";
  76                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  77                 };
  78
  79                 dsl_amber {
  80                         label = "dm200:amber:dsl";
  81                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  82                 };
  83                 dsl_green: dsl_green {
  84                         label = "dm200:green:dsl";
  85                         gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
  86                 };
  87         };
  88 };
  89
  90 &eth0 {
  91         lantiq,phys = <&gphy1>;
  92
  93         lan: interface@0 {
  94                 compatible = "lantiq,xrx200-pdi";
  95                 #address-cells = <1>;
  96                 #size-cells = <0>;
  97                 reg = <0>;
  98
  99                 ethernet@4 {
 100                         compatible = "lantiq,xrx200-pdi-port";
 101                         reg = <4>;
 102                         phy-mode = "mii";
 103                         phy-handle = <&phy13>;
 104                 };
 105         };
 106
 107         mdio {
 108                 #address-cells = <1>;
 109                 #size-cells = <0>;
 110                 compatible = "lantiq,xrx200-mdio";
 111
 112                 phy13: ethernet-phy@13 {
 113                         reg = <0x13>;
 114                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 115                 };
 116         };
 117 };
 118
 119 &gphy1 {
 120         lantiq,gphy-mode = <GPHY_MODE_FE>;
 121 };
 122
 123 &gpio {
 124         pinctrl-names = "default";
 125         pinctrl-0 = <&state_default>;
 126
 127         state_default: pinmux {
 128                 mdio {
 129                         lantiq,groups = "mdio";
 130                         lantiq,function = "mdio";
 131                 };
 132         };
 133
 134         pins_spi_default: pins_spi_default {
 135                 spi_in {
 136                         lantiq,groups = "spi_di";
 137                         lantiq,function = "spi";
 138                 };
 139                 spi_out {
 140                         lantiq,groups = "spi_do", "spi_clk", "spi_cs4";
 141                         lantiq,function = "spi";
 142                         lantiq,output = <1>;
 143                 };
 144         };
 145 };
 146
 147 &pcie0 {
 148         status = "disabled";
 149 };
 150
 151 &spi {
 152         status = "okay";
 153
 154         pinctrl-names = "default";
 155         pinctrl-0 = <&pins_spi_default>;
 156
 157         m25p80@4 {
 158                 #address-cells = <1>;
 159                 #size-cells = <1>;
 160                 compatible = "jedec,spi-nor";
 161                 reg = <4 0>;
 162                 spi-max-frequency = <10000000>;
 163
 164                 partitions {
 165                         compatible = "fixed-partitions";
 166                         #address-cells = <1>;
 167                         #size-cells = <1>;
 168
 169                         partition@0 {
 170                                 reg = <0x0 0x20000>;
 171                                 label = "uboot";
 172                                 read-only;
 173                         };
 174
 175                         partition@20000 {
 176                                 reg = <0x20000 0x10000>;
 177                                 label = "gphyfirmware";
 178                                 read-only;
 179                         };
 180
 181                         partition@30000 {
 182                                 reg = <0x30000 0x7b0000>;
 183                                 label = "firmware";
 184                         };
 185
 186                         partition@7e0000 {
 187                                 reg = <0x7e0000 0x10000>;
 188                                 label = "sysconfig";
 189                                 read-only;
 190                         };
 191
 192                         partition@7f0000 {
 193                                 reg = <0x7f0000 0x2000>;
 194                                 label = "ubootconfig";
 195                                 read-only;
 196                         };
 197
 198                         partition@7f2000 {
 199                                 reg = <0x7f2000 0x1000>;
 200                                 label = "ART";
 201                                 read-only;
 202                         };
 203
 204                         partition@7f3000 {
 205                                 reg = <0x7f3000 0x1000>;
 206                                 label = "pot";
 207                                 read-only;
 208                         };
 209
 210                         partition@7f4000 {
 211                                 reg = <0x7f4000 0xc000>;
 212                                 label = "ret";
 213                                 read-only;
 214                         };
 215                 };
 216         };
 217 };