target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts

   1 #include "qcom-ipq8064-v2.0.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "NEC Aterm WG2600HP";
   7         compatible = "nec,wg2600hp", "qcom,ipq8064";
   8
   9         memory@0 {
  10                 reg = <0x42000000 0x1e000000>;
  11                 device_type = "memory";
  12         };
  13
  14         reserved-memory {
  15                 #address-cells = <1>;
  16                 #size-cells = <1>;
  17                 ranges;
  18                 rsvd@41200000 {
  19                         reg = <0x41200000 0x300000>;
  20                         no-map;
  21                 };
  22         };
  23
  24         aliases {
  25                 serial0 = &gsbi4_serial;
  26                 mdio-gpio0 = &mdio0;
  27
  28                 led-boot = &power_green;
  29                 led-failsafe = &power_red;
  30                 led-running = &power_green;
  31                 led-upgrade = &power_green;
  32         };
  33
  34         chosen {
  35                 stdout-path = "serial0:115200n8";
  36         };
  37
  38         soc {
  39                 mdio0: mdio {
  40                         compatible = "virtual,mdio-gpio";
  41                         #address-cells = <1>;
  42                         #size-cells = <0>;
  43                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
  44                         pinctrl-0 = <&mdio0_pins>;
  45                         pinctrl-names = "default";
  46
  47                         ethernet-phy@0 {
  48                                 reg = <0>;
  49                                 qca,ar8327-initvals = <
  50                                         0x00004 0x06000000  /* PAD0_MODE */
  51                                         0x0000c 0x00080080  /* PAD6_MODE */
  52                                         0x000e4 0x0006a545  /* MAC_POWER_SEL */
  53                                         0x000e0 0xc74164de  /* SGMII_CTRL */
  54                                         0x0007c 0x0000004e  /* PORT0_STATUS */
  55                                         0x00094 0x0000004e  /* PORT6_STATUS */
  56                                         >;
  57                         };
  58
  59                         ethernet-phy@4 {
  60                                 reg = <4>;
  61                         };
  62                 };
  63         };
  64
  65         keys {
  66                 compatible = "gpio-keys";
  67                 pinctrl-0 = <&button_pins>;
  68                 pinctrl-names = "default";
  69
  70                 wps {
  71                         label = "wps";
  72                         gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
  73                         linux,code = <KEY_WPS_BUTTON>;
  74                 };
  75
  76                 reset {
  77                         label = "reset";
  78                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
  79                         linux,code = <KEY_RESTART>;
  80                 };
  81
  82                 bridge {
  83                         label = "bridge";
  84                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
  85                         linux,code = <BTN_0>;
  86                         linux,input-type = <EV_SW>;
  87                 };
  88
  89                 converter {
  90                         label = "converter";
  91                         gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
  92                         linux,code = <BTN_0>;
  93                         linux,input-type = <EV_SW>;
  94                 };
  95         };
  96
  97         leds {
  98                 compatible = "gpio-leds";
  99                 pinctrl-0 = <&led_pins>;
 100                 pinctrl-names = "default";
 101
 102                 converter_green {
 103                         label = "wg2600hp:green:converter";
 104                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
 105                 };
 106
 107                 power_red: power_red {
 108                         label = "wg2600hp:red:power";
 109                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 110                 };
 111
 112                 active_green {
 113                         label = "wg2600hp:green:active";
 114                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 115                 };
 116
 117                 active_red {
 118                         label = "wg2600hp:red:active";
 119                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 120                 };
 121
 122                 power_green: power_green {
 123                         label = "wg2600hp:green:power";
 124                         gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
 125                 };
 126
 127                 converter_red {
 128                         label = "wg2600hp:red:converter";
 129                         gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
 130                 };
 131
 132                 wlan2g_green {
 133                         label = "wg2600hp:green:wlan2g";
 134                         gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
 135                 };
 136
 137                 wlan2g_red {
 138                         label = "wg2600hp:red:wlan2g";
 139                         gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
 140                 };
 141
 142                 wlan5g_green {
 143                         label = "wg2600hp:green:wlan5g";
 144                         gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
 145                 };
 146
 147                 wlan5g_red {
 148                         label = "wg2600hp:red:wlan5g";
 149                         gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
 150                 };
 151
 152                 tv_green {
 153                         label = "wg2600hp:green:tv";
 154                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
 155                 };
 156
 157                 tv_red {
 158                         label = "wg2600hp:red:tv";
 159                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
 160                 };
 161         };
 162 };
 163
 164 &adm_dma {
 165         status = "okay";
 166 };
 167
 168 &gmac1 {
 169         status = "okay";
 170
 171         phy-mode = "rgmii";
 172         qcom,id = <1>;
 173
 174         pinctrl-0 = <&rgmii2_pins>;
 175         pinctrl-names = "default";
 176
 177         mtd-mac-address = <&PRODUCTDATA 6>;
 178
 179         fixed-link {
 180                 speed = <1000>;
 181                 full-duplex;
 182         };
 183 };
 184
 185 &gmac2 {
 186         status = "okay";
 187
 188         phy-mode = "sgmii";
 189         qcom,id = <2>;
 190
 191         mtd-mac-address = <&PRODUCTDATA 0>;
 192
 193         fixed-link {
 194                 speed = <1000>;
 195                 full-duplex;
 196         };
 197 };
 198
 199 &gsbi4 {
 200         status = "okay";
 201         qcom,mode = <GSBI_PROT_I2C_UART>;
 202 };
 203
 204 &gsbi4_serial {
 205         status = "okay";
 206 };
 207
 208 &gsbi5 {
 209         status = "okay";
 210
 211         qcom,mode = <GSBI_PROT_SPI>;
 212
 213         spi@1a280000 {
 214                 status = "okay";
 215
 216                 pinctrl-0 = <&spi_pins>;
 217                 pinctrl-names = "default";
 218
 219                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 220
 221                 flash@0 {
 222                         compatible = "jedec,spi-nor";
 223                         spi-max-frequency = <50000000>;
 224                         reg = <0>;
 225
 226                         partitions {
 227                                 compatible = "fixed-partitions";
 228                                 #address-cells = <1>;
 229                                 #size-cells = <1>;
 230
 231                                 SBL1@0 {
 232                                         label = "SBL1";
 233                                         reg = <0x0 0x20000>;
 234                                         read-only;
 235                                 };
 236
 237                                 MIBIB@20000 {
 238                                         label = "MIBIB";
 239                                         reg = <0x20000 0x20000>;
 240                                         read-only;
 241                                 };
 242
 243                                 SBL2@40000 {
 244                                         label = "SBL2";
 245                                         reg = <0x40000 0x40000>;
 246                                         read-only;
 247                                 };
 248
 249                                 SBL3@80000 {
 250                                         label = "SBL3";
 251                                         reg = <0x80000 0x80000>;
 252                                         read-only;
 253                                 };
 254
 255                                 DDRCONFIG@100000 {
 256                                         label = "DDRCONFIG";
 257                                         reg = <0x100000 0x10000>;
 258                                         read-only;
 259                                 };
 260
 261                                 SSD@110000 {
 262                                         label = "SSD";
 263                                         reg = <0x110000 0x10000>;
 264                                         read-only;
 265                                 };
 266
 267                                 TZ@120000 {
 268                                         label = "TZ";
 269                                         reg = <0x120000 0x80000>;
 270                                         read-only;
 271                                 };
 272
 273                                 RPM@1a0000 {
 274                                         label = "RPM";
 275                                         reg = <0x1a0000 0x80000>;
 276                                         read-only;
 277                                 };
 278
 279                                 APPSBL@220000 {
 280                                         label = "APPSBL";
 281                                         reg = <0x220000 0x80000>;
 282                                         read-only;
 283                                 };
 284
 285                                 APPSBLENV@2a0000 {
 286                                         label = "APPSBLENV";
 287                                         reg = <0x2a0000 0x10000>;
 288                                 };
 289
 290                                 PRODUCTDATA: PRODUCTDATA@2b0000 {
 291                                         label = "PRODUCTDATA";
 292                                         reg = <0x2b0000 0x30000>;
 293                                         read-only;
 294                                 };
 295
 296                                 ART@2e0000 {
 297                                         label = "ART";
 298                                         reg = <0x2e0000 0x40000>;
 299                                         read-only;
 300                                 };
 301
 302                                 TP@320000 {
 303                                         label = "TP";
 304                                         reg = <0x320000 0x40000>;
 305                                         read-only;
 306                                 };
 307
 308                                 TINY@360000 {
 309                                         label = "TINY";
 310                                         reg = <0x360000 0x500000>;
 311                                         read-only;
 312                                 };
 313
 314                                 firmware@860000 {
 315                                         compatible = "denx,uimage";
 316                                         label = "firmware";
 317                                         reg = <0x860000 0x17a0000>;
 318                                 };
 319                         };
 320                 };
 321         };
 322 };
 323
 324 &usb3_0 {
 325         status = "okay";
 326
 327         pinctrl-0 = <&usb_pwr_en_pins>;
 328         pinctrl-names = "default";
 329 };
 330
 331 &usb3_1 {
 332         status = "okay";
 333 };
 334
 335 &pcie0 {
 336         status = "okay";
 337 };
 338
 339 &pcie1 {
 340         status = "okay";
 341         force_gen1 = <1>;
 342 };
 343
 344 &qcom_pinmux {
 345         button_pins: button_pins {
 346                 mux {
 347                         pins = "gpio16", "gpio54", "gpio24", "gpio25";
 348                         function = "gpio";
 349                         drive-strength = <2>;
 350                         bias-pull-up;
 351                 };
 352         };
 353
 354         i2c4_pins: i2c4_pinmux {
 355                 mux {
 356                         pins = "gpio12", "gpio13";
 357                         function = "gsbi4";
 358                         drive-strength = <12>;
 359                         bias-disable;
 360                 };
 361         };
 362
 363         led_pins: led_pins {
 364                 mux {
 365                         pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
 366                                 "gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
 367                                 "gpio64", "gpio65";
 368                         function = "gpio";
 369                         drive-strength = <2>;
 370                         bias-pull-down;
 371                 };
 372         };
 373
 374         spi_pins: spi_pins {
 375                 mux {
 376                         pins = "gpio18", "gpio19", "gpio21";
 377                         function = "gsbi5";
 378                         bias-pull-down;
 379                 };
 380
 381                 data {
 382                         pins = "gpio18", "gpio19";
 383                         drive-strength = <10>;
 384                 };
 385
 386                 cs {
 387                         pins = "gpio20";
 388                         drive-strength = <10>;
 389                         bias-pull-up;
 390                 };
 391
 392                 clk {
 393                         pins = "gpio21";
 394                         drive-strength = <12>;
 395                 };
 396         };
 397
 398         mdio0_pins: mdio0_pins {
 399                 mux {
 400                         pins = "gpio0", "gpio1";
 401                         function = "gpio";
 402                         drive-strength = <8>;
 403                         bias-disable;
 404                 };
 405         };
 406
 407         rgmii2_pins: rgmii2_pins {
 408                 mux {
 409                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 410                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 411                         function = "rgmii2";
 412                         drive-strength = <8>;
 413                         bias-disable;
 414                 };
 415         };
 416
 417         usb_pwr_en_pins: usb_pwr_en_pins {
 418                 mux {
 419                         pins = "gpio22";
 420                         function = "gpio";
 421                         drive-strength = <2>;
 422                         bias-pull-down;
 423                         output-high;
 424                 };
 425         };
 426 };