--- /dev/null
+From bbfab331e3abd9fa8767eea6bf5c4684cdd4b934 Mon Sep 17 00:00:00 2001
+From: Neo Jou <neojou@gmail.com>
+Date: Tue, 21 May 2019 17:12:20 +0800
+Subject: [PATCH] brcmfmac: use strlcpy() instead of strcpy()
+
+The function strcpy() is inherently not safe. Though the function
+works without problems here, it would be better to use other safer
+function, e.g. strlcpy(), to replace strcpy() still.
+
+Signed-off-by: Neo Jou <neojou@gmail.com>
+Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -269,7 +269,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
+
+ /* query for 'ver' to get version info from firmware */
+ memset(buf, 0, sizeof(buf));
+- strcpy(buf, "ver");
++ strlcpy(buf, "ver", sizeof(buf));
+ err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
+ if (err < 0) {
+ bphy_err(drvr, "Retrieving version information failed, %d\n",
--- /dev/null
+From 46f24cd5980de4302982d38ebb6620560ead10b3 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 10:45:30 +0200
+Subject: [PATCH 1/3] brcmfmac: add 160MHz in chandef_to_chanspec()
+
+The function chandef_to_chanspec() was not handling 160MHz bandwidth
+resulting in wrong encoding of the channel. That resulting in firmware
+rejecting the provided channel specification.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 21 ++++++++++++++++++-
+ 1 file changed, 20 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -287,8 +287,26 @@ static u16 chandef_to_chanspec(struct br
+ else
+ ch_inf.sb = BRCMU_CHAN_SB_UU;
+ break;
+- case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
++ ch_inf.bw = BRCMU_CHAN_BW_160;
++ if (primary_offset == -70)
++ ch_inf.sb = BRCMU_CHAN_SB_LLL;
++ else if (primary_offset == -50)
++ ch_inf.sb = BRCMU_CHAN_SB_LLU;
++ else if (primary_offset == -30)
++ ch_inf.sb = BRCMU_CHAN_SB_LUL;
++ else if (primary_offset == -10)
++ ch_inf.sb = BRCMU_CHAN_SB_LUU;
++ else if (primary_offset == 10)
++ ch_inf.sb = BRCMU_CHAN_SB_ULL;
++ else if (primary_offset == 30)
++ ch_inf.sb = BRCMU_CHAN_SB_ULU;
++ else if (primary_offset == 50)
++ ch_inf.sb = BRCMU_CHAN_SB_UUL;
++ else
++ ch_inf.sb = BRCMU_CHAN_SB_UUU;
++ break;
++ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
+ default:
+@@ -307,6 +325,7 @@ static u16 chandef_to_chanspec(struct br
+ }
+ d11inf->encchspec(&ch_inf);
+
++ brcmf_dbg(TRACE, "chanspec: 0x%x\n", ch_inf.chspec);
+ return ch_inf.chspec;
+ }
+
--- /dev/null
+From 7acf04a0ae2adf5d3e9de9adeec3129e74bf6ef2 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:06 +0200
+Subject: [PATCH 1/7] Revert "brcmfmac: fix NULL pointer derefence during USB
+ disconnect"
+
+This reverts commit 5cdb0ef6144f47440850553579aa923c20a63f23. Subsequent
+changes make rework the driver code fixing the issue differently.
+
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ .../wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 11 ++---------
+ .../wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 6 ++----
+ .../wireless/broadcom/brcm80211/brcmfmac/core.c | 4 +---
+ .../broadcom/brcm80211/brcmfmac/fwsignal.c | 16 ++++------------
+ .../broadcom/brcm80211/brcmfmac/fwsignal.h | 3 +--
+ .../wireless/broadcom/brcm80211/brcmfmac/proto.c | 10 ++--------
+ .../wireless/broadcom/brcm80211/brcmfmac/proto.h | 3 +--
+ 7 files changed, 13 insertions(+), 40 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+@@ -479,18 +479,11 @@ fail:
+ return -ENOMEM;
+ }
+
+-void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr)
+-{
+- struct brcmf_bcdc *bcdc = drvr->proto->pd;
+-
+- brcmf_fws_detach_pre_delif(bcdc->fws);
+-}
+-
+-void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr)
++void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr)
+ {
+ struct brcmf_bcdc *bcdc = drvr->proto->pd;
+
+ drvr->proto->pd = NULL;
+- brcmf_fws_detach_post_delif(bcdc->fws);
++ brcmf_fws_detach(bcdc->fws);
+ kfree(bcdc);
+ }
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h
+@@ -18,16 +18,14 @@
+
+ #ifdef CPTCFG_BRCMFMAC_PROTO_BCDC
+ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr);
+-void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr);
+-void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr);
++void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr);
+ void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state);
+ void brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp,
+ bool success);
+ struct brcmf_fws_info *drvr_to_fws(struct brcmf_pub *drvr);
+ #else
+ static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; }
+-static void brcmf_proto_bcdc_detach_pre_delif(struct brcmf_pub *drvr) {};
+-static inline void brcmf_proto_bcdc_detach_post_delif(struct brcmf_pub *drvr) {}
++static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {}
+ #endif
+
+ #endif /* BRCMFMAC_BCDC_H */
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1294,8 +1294,6 @@ void brcmf_detach(struct device *dev)
+
+ brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
+
+- brcmf_proto_detach_pre_delif(drvr);
+-
+ /* make sure primary interface removed last */
+ for (i = BRCMF_MAX_IFS-1; i > -1; i--)
+ brcmf_remove_interface(drvr->iflist[i], false);
+@@ -1305,7 +1303,7 @@ void brcmf_detach(struct device *dev)
+
+ brcmf_bus_stop(drvr->bus_if);
+
+- brcmf_proto_detach_post_delif(drvr);
++ brcmf_proto_detach(drvr);
+
+ brcmf_debug_detach(drvr);
+ bus_if->drvr = NULL;
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c
+@@ -2420,25 +2420,17 @@ struct brcmf_fws_info *brcmf_fws_attach(
+ return fws;
+
+ fail:
+- brcmf_fws_detach_pre_delif(fws);
+- brcmf_fws_detach_post_delif(fws);
++ brcmf_fws_detach(fws);
+ return ERR_PTR(rc);
+ }
+
+-void brcmf_fws_detach_pre_delif(struct brcmf_fws_info *fws)
++void brcmf_fws_detach(struct brcmf_fws_info *fws)
+ {
+ if (!fws)
+ return;
+- if (fws->fws_wq) {
+- destroy_workqueue(fws->fws_wq);
+- fws->fws_wq = NULL;
+- }
+-}
+
+-void brcmf_fws_detach_post_delif(struct brcmf_fws_info *fws)
+-{
+- if (!fws)
+- return;
++ if (fws->fws_wq)
++ destroy_workqueue(fws->fws_wq);
+
+ /* cleanup */
+ brcmf_fws_lock(fws);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.h
+@@ -19,8 +19,7 @@
+ #define FWSIGNAL_H_
+
+ struct brcmf_fws_info *brcmf_fws_attach(struct brcmf_pub *drvr);
+-void brcmf_fws_detach_pre_delif(struct brcmf_fws_info *fws);
+-void brcmf_fws_detach_post_delif(struct brcmf_fws_info *fws);
++void brcmf_fws_detach(struct brcmf_fws_info *fws);
+ bool brcmf_fws_queue_skbs(struct brcmf_fws_info *fws);
+ bool brcmf_fws_fc_active(struct brcmf_fws_info *fws);
+ void brcmf_fws_hdrpull(struct brcmf_if *ifp, s16 siglen, struct sk_buff *skb);
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.c
+@@ -66,22 +66,16 @@ fail:
+ return -ENOMEM;
+ }
+
+-void brcmf_proto_detach_post_delif(struct brcmf_pub *drvr)
++void brcmf_proto_detach(struct brcmf_pub *drvr)
+ {
+ brcmf_dbg(TRACE, "Enter\n");
+
+ if (drvr->proto) {
+ if (drvr->bus_if->proto_type == BRCMF_PROTO_BCDC)
+- brcmf_proto_bcdc_detach_post_delif(drvr);
++ brcmf_proto_bcdc_detach(drvr);
+ else if (drvr->bus_if->proto_type == BRCMF_PROTO_MSGBUF)
+ brcmf_proto_msgbuf_detach(drvr);
+ kfree(drvr->proto);
+ drvr->proto = NULL;
+ }
+ }
+-
+-void brcmf_proto_detach_pre_delif(struct brcmf_pub *drvr)
+-{
+- if (drvr->proto && drvr->bus_if->proto_type == BRCMF_PROTO_BCDC)
+- brcmf_proto_bcdc_detach_pre_delif(drvr);
+-}
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h
+@@ -53,8 +53,7 @@ struct brcmf_proto {
+
+
+ int brcmf_proto_attach(struct brcmf_pub *drvr);
+-void brcmf_proto_detach_pre_delif(struct brcmf_pub *drvr);
+-void brcmf_proto_detach_post_delif(struct brcmf_pub *drvr);
++void brcmf_proto_detach(struct brcmf_pub *drvr);
+
+ static inline int brcmf_proto_hdrpull(struct brcmf_pub *drvr, bool do_fws,
+ struct sk_buff *skb,
--- /dev/null
+From 701fb69f2c36cba83583990e67a3925f920fd96a Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:07 +0200
+Subject: [PATCH 2/7] brcmfmac: change the order of things in brcmf_detach()
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+When brcmf_detach() from the bus layer upon rmmod we can no longer
+communicate. Hence we will set the bus state to DOWN and cleanup
+the event and protocol layer. The network interfaces need to be
+deleted before brcmf_cfg80211_detach() because the latter does the
+wiphy_unregister() which issues a warning if there are still network
+devices linked to the wiphy instance.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+Tested-by: Rafał Miłecki <rafal@milecki.pl>
+---
+ .../broadcom/brcm80211/brcmfmac/core.c | 27 ++++++++++---------
+ 1 file changed, 14 insertions(+), 13 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -1287,26 +1287,27 @@ void brcmf_detach(struct device *dev)
+ unregister_inet6addr_notifier(&drvr->inet6addr_notifier);
+ #endif
+
+- /* stop firmware event handling */
+- brcmf_fweh_detach(drvr);
+- if (drvr->config)
+- brcmf_p2p_detach(&drvr->config->p2p);
+-
+ brcmf_bus_change_state(bus_if, BRCMF_BUS_DOWN);
+-
+- /* make sure primary interface removed last */
+- for (i = BRCMF_MAX_IFS-1; i > -1; i--)
+- brcmf_remove_interface(drvr->iflist[i], false);
+-
+- brcmf_cfg80211_detach(drvr->config);
+- drvr->config = NULL;
+-
+ brcmf_bus_stop(drvr->bus_if);
+
++ brcmf_fweh_detach(drvr);
+ brcmf_proto_detach(drvr);
+-
+ brcmf_debug_detach(drvr);
++
++ /* make sure primary interface removed last */
++ for (i = BRCMF_MAX_IFS - 1; i > -1; i--) {
++ if (drvr->iflist[i])
++ brcmf_del_if(drvr, drvr->iflist[i]->bsscfgidx, false);
++ }
++
++ if (drvr->config) {
++ brcmf_p2p_detach(&drvr->config->p2p);
++ brcmf_cfg80211_detach(drvr->config);
++ drvr->config = NULL;
++ }
++
+ bus_if->drvr = NULL;
++
+ wiphy_free(drvr->wiphy);
+ }
+
--- /dev/null
+From 1be747d977014fea13dbac0de885c0c358eb393c Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:08 +0200
+Subject: [PATCH 3/7] brcmfmac: avoid firmware command in brcmf_netdev_open()
+ when bus is down
+
+No point in sending a firmware command when bus is down so make it
+conditional checking the state.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+@@ -589,7 +589,8 @@ static int brcmf_netdev_stop(struct net_
+
+ brcmf_cfg80211_down(ndev);
+
+- brcmf_fil_iovar_data_set(ifp, "arp_hostip_clear", NULL, 0);
++ if (ifp->drvr->bus_if->state == BRCMF_BUS_UP)
++ brcmf_fil_iovar_data_set(ifp, "arp_hostip_clear", NULL, 0);
+
+ brcmf_net_setcarrier(ifp, false);
+
--- /dev/null
+From 0d91defd7bfc42c0ed053ba03b5ea2eff2e1d2f5 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:09 +0200
+Subject: [PATCH 4/7] brcmfmac: clear events in brcmf_fweh_detach() will always
+ fail
+
+Clearing firmware events in brcmf_fweh_detach() is always failing
+because it is called only upon driver remove and communication
+with firmware is no longer possible.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 9 ---------
+ 1 file changed, 9 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c
+@@ -314,16 +314,7 @@ void brcmf_fweh_attach(struct brcmf_pub
+ void brcmf_fweh_detach(struct brcmf_pub *drvr)
+ {
+ struct brcmf_fweh_info *fweh = &drvr->fweh;
+- struct brcmf_if *ifp = brcmf_get_ifp(drvr, 0);
+- s8 eventmask[BRCMF_EVENTING_MASK_LEN];
+
+- if (ifp) {
+- /* clear all events */
+- memset(eventmask, 0, BRCMF_EVENTING_MASK_LEN);
+- (void)brcmf_fil_iovar_data_set(ifp, "event_msgs",
+- eventmask,
+- BRCMF_EVENTING_MASK_LEN);
+- }
+ /* cancel the worker */
+ cancel_work_sync(&fweh->event_work);
+ WARN_ON(!list_empty(&fweh->event_q));
--- /dev/null
+From 66ab63fbb33bf367807e3e471231379dce6f8b8c Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:10 +0200
+Subject: [PATCH 5/7] brcmfmac: avoid firmware commands when bus is down
+
+Upon rmmod a few attempts are made to inform firmware, but there is
+no point as the bus is down and these will fail. Avoid them to keep
+the logs clean.
+
+Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ .../broadcom/brcm80211/brcmfmac/cfg80211.c | 23 +++++++++++--------
+ 1 file changed, 13 insertions(+), 10 deletions(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+@@ -1388,17 +1388,21 @@ static void brcmf_link_down(struct brcmf
+ {
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(vif->wdev.wiphy);
+ struct brcmf_pub *drvr = cfg->pub;
++ bool bus_up = drvr->bus_if->state == BRCMF_BUS_UP;
+ s32 err = 0;
+
+ brcmf_dbg(TRACE, "Enter\n");
+
+ if (test_and_clear_bit(BRCMF_VIF_STATUS_CONNECTED, &vif->sme_state)) {
+- brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n ");
+- err = brcmf_fil_cmd_data_set(vif->ifp,
+- BRCMF_C_DISASSOC, NULL, 0);
+- if (err) {
+- bphy_err(drvr, "WLC_DISASSOC failed (%d)\n", err);
++ if (bus_up) {
++ brcmf_dbg(INFO, "Call WLC_DISASSOC to stop excess roaming\n");
++ err = brcmf_fil_cmd_data_set(vif->ifp,
++ BRCMF_C_DISASSOC, NULL, 0);
++ if (err)
++ bphy_err(drvr, "WLC_DISASSOC failed (%d)\n",
++ err);
+ }
++
+ if ((vif->wdev.iftype == NL80211_IFTYPE_STATION) ||
+ (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT))
+ cfg80211_disconnected(vif->wdev.netdev, reason, NULL, 0,
+@@ -5041,18 +5045,16 @@ static int brcmf_cfg80211_get_channel(st
+ struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
+ struct net_device *ndev = wdev->netdev;
+ struct brcmf_pub *drvr = cfg->pub;
+- struct brcmf_if *ifp;
+ struct brcmu_chan ch;
+ enum nl80211_band band = 0;
+ enum nl80211_chan_width width = 0;
+ u32 chanspec;
+ int freq, err;
+
+- if (!ndev)
++ if (!ndev || drvr->bus_if->state != BRCMF_BUS_UP)
+ return -ENODEV;
+- ifp = netdev_priv(ndev);
+
+- err = brcmf_fil_iovar_int_get(ifp, "chanspec", &chanspec);
++ err = brcmf_fil_iovar_int_get(netdev_priv(ndev), "chanspec", &chanspec);
+ if (err) {
+ bphy_err(drvr, "chanspec failed (%d)\n", err);
+ return err;
--- /dev/null
+From dabf1e17d33e087d4e24e6d0224cf9bc04ebfcc1 Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:11 +0200
+Subject: [PATCH 6/7] brcmfmac: simply remove flowring if bus is down
+
+When the bus is down, eg. due to rmmod, there is no need to
+attempt to inform firmware about it.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/msgbuf.c
+@@ -1408,6 +1408,13 @@ void brcmf_msgbuf_delete_flowring(struct
+ u8 ifidx;
+ int err;
+
++ /* no need to submit if firmware can not be reached */
++ if (drvr->bus_if->state != BRCMF_BUS_UP) {
++ brcmf_dbg(MSGBUF, "bus down, flowring will be removed\n");
++ brcmf_msgbuf_remove_flowring(msgbuf, flowid);
++ return;
++ }
++
+ commonring = msgbuf->commonrings[BRCMF_H2D_MSGRING_CONTROL_SUBMIT];
+ brcmf_commonring_lock(commonring);
+ ret_ptr = brcmf_commonring_reserve_for_write(commonring);
--- /dev/null
+From 979c9a17fc78f3b8393fd92ca250fe4239872eee Mon Sep 17 00:00:00 2001
+From: Arend van Spriel <arend.vanspriel@broadcom.com>
+Date: Thu, 11 Jul 2019 11:05:12 +0200
+Subject: [PATCH 7/7] brcmfmac: remove unnecessary strlcpy() upon obtaining
+ "ver" iovar
+
+Recently a strcpy() was replaced by strlcpy(). However, the strcpy()
+was not needed in the first place. So removing that line of code.
+
+Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
+Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
+Reviewed-by: Franky Lin <franky.lin@broadcom.com>
+Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
+---
+ drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 1 -
+ 1 file changed, 1 deletion(-)
+
+--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
++++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
+@@ -269,7 +269,6 @@ int brcmf_c_preinit_dcmds(struct brcmf_i
+
+ /* query for 'ver' to get version info from firmware */
+ memset(buf, 0, sizeof(buf));
+- strlcpy(buf, "ver", sizeof(buf));
+ err = brcmf_fil_iovar_data_get(ifp, "ver", buf, sizeof(buf));
+ if (err < 0) {
+ bphy_err(drvr, "Retrieving version information failed, %d\n",
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -662,8 +662,36 @@ static struct wireless_dev *brcmf_cfg802
+@@ -639,8 +639,36 @@ static struct wireless_dev *brcmf_cfg802
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct brcmf_pub *drvr = cfg->pub;
struct wireless_dev *wdev;
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
-@@ -2823,6 +2823,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
+@@ -2798,6 +2798,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip
* preference in cfg struct to apply this to
* FW later while initializing the dongle
*/
projects / openwrt / staging / pepe2k.git / commitdiff