--- /dev/null
+From 36366e367ee93ced84fddb8fae6675e12985f5a4 Mon Sep 17 00:00:00 2001
+From: Paul Burton <paulburton@kernel.org>
+Date: Thu, 5 Dec 2019 10:23:18 -0800
+Subject: [PATCH] MIPS: BPF: Restore MIPS32 cBPF JIT
+
+Commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32
+architecture.") enabled our eBPF JIT for MIPS32 kernels, whereas it has
+previously only been availailable for MIPS64. It was my understanding at
+the time that the BPF test suite was passing & JITing a comparable
+number of tests to our cBPF JIT [1], but it turns out that was not the
+case.
+
+The eBPF JIT has a number of problems on MIPS32:
+
+- Most notably various code paths still result in emission of MIPS64
+ instructions which will cause reserved instruction exceptions & kernel
+ panics when run on MIPS32 CPUs.
+
+- The eBPF JIT doesn't account for differences between the O32 ABI used
+ by MIPS32 kernels versus the N64 ABI used by MIPS64 kernels. Notably
+ arguments beyond the first 4 are passed on the stack in O32, and this
+ is entirely unhandled when JITing a BPF_CALL instruction. Stack space
+ must be reserved for arguments even if they all fit in registers, and
+ the callee is free to assume that stack space has been reserved for
+ its use - with the eBPF JIT this is not the case, so calling any
+ function can result in clobbering values on the stack & unpredictable
+ behaviour. Function arguments in eBPF are always 64-bit values which
+ is also entirely unhandled - the JIT still uses a single (32-bit)
+ register per argument. As a result all function arguments are always
+ passed incorrectly when JITing a BPF_CALL instruction, leading to
+ kernel crashes or strange behavior.
+
+- The JIT attempts to bail our on use of ALU64 instructions or 64-bit
+ memory access instructions. The code doing this at the start of
+ build_one_insn() incorrectly checks whether BPF_OP() equals BPF_DW,
+ when it should really be checking BPF_SIZE() & only doing so when
+ BPF_CLASS() is one of BPF_{LD,LDX,ST,STX}. This results in false
+ positives that cause more bailouts than intended, and that in turns
+ hides some of the problems described above.
+
+- The kernel's cBPF->eBPF translation makes heavy use of 64-bit eBPF
+ instructions that the MIPS32 eBPF JIT bails out on, leading to most
+ cBPF programs not being JITed at all.
+
+Until these problems are resolved, revert the removal of the cBPF JIT
+performed by commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for
+MIPS32 architecture."). Together with commit f8fffebdea75 ("MIPS: BPF:
+Disable MIPS32 eBPF JIT") this restores MIPS32 BPF JIT behavior back to
+the same state it was prior to the introduction of the broken eBPF JIT
+support.
+
+[1] https://lore.kernel.org/linux-mips/MWHPR2201MB13583388481F01A422CE7D66D4410@MWHPR2201MB1358.namprd22.prod.outlook.com/
+
+Signed-off-by: Paul Burton <paulburton@kernel.org>
+Fixes: 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.")
+Cc: Daniel Borkmann <daniel@iogearbox.net>
+Cc: Hassan Naveed <hnaveed@wavecomp.com>
+Cc: Tony Ambardar <itugrok@yahoo.com>
+Cc: bpf@vger.kernel.org
+Cc: netdev@vger.kernel.org
+Cc: linux-mips@vger.kernel.org
+Cc: linux-kernel@vger.kernel.org
+---
+ arch/mips/Kconfig | 1 +
+ arch/mips/net/Makefile | 1 +
+ arch/mips/net/bpf_jit.c | 1270 +++++++++++++++++++++++++++++++++++
+ arch/mips/net/bpf_jit_asm.S | 285 ++++++++
+ 4 files changed, 1557 insertions(+)
+ create mode 100644 arch/mips/net/bpf_jit.c
+ create mode 100644 arch/mips/net/bpf_jit_asm.S
+
+diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
+index e5c2d47608fe..33674cdc3aa8 100644
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -46,6 +46,7 @@ config MIPS
+ select HAVE_ARCH_TRACEHOOK
+ select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES
+ select HAVE_ASM_MODVERSIONS
++ select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS
+ select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2
+ select HAVE_CONTEXT_TRACKING
+ select HAVE_COPY_THREAD_TLS
+diff --git a/arch/mips/net/Makefile b/arch/mips/net/Makefile
+index 2d03af7d6b19..d55912349039 100644
+--- a/arch/mips/net/Makefile
++++ b/arch/mips/net/Makefile
+@@ -1,4 +1,5 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ # MIPS networking code
+
++obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o
+ obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o
+diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c
+new file mode 100644
+index 000000000000..3a0e34f4e615
+--- /dev/null
++++ b/arch/mips/net/bpf_jit.c
+@@ -0,0 +1,1270 @@
++/*
++ * Just-In-Time compiler for BPF filters on MIPS
++ *
++ * Copyright (c) 2014 Imagination Technologies Ltd.
++ * Author: Markos Chandras <markos.chandras@imgtec.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; version 2 of the License.
++ */
++
++#include <linux/bitops.h>
++#include <linux/compiler.h>
++#include <linux/errno.h>
++#include <linux/filter.h>
++#include <linux/if_vlan.h>
++#include <linux/moduleloader.h>
++#include <linux/netdevice.h>
++#include <linux/string.h>
++#include <linux/slab.h>
++#include <linux/types.h>
++#include <asm/asm.h>
++#include <asm/bitops.h>
++#include <asm/cacheflush.h>
++#include <asm/cpu-features.h>
++#include <asm/uasm.h>
++
++#include "bpf_jit.h"
++
++/* ABI
++ * r_skb_hl SKB header length
++ * r_data SKB data pointer
++ * r_off Offset
++ * r_A BPF register A
++ * r_X BPF register X
++ * r_skb *skb
++ * r_M *scratch memory
++ * r_skb_len SKB length
++ *
++ * On entry (*bpf_func)(*skb, *filter)
++ * a0 = MIPS_R_A0 = skb;
++ * a1 = MIPS_R_A1 = filter;
++ *
++ * Stack
++ * ...
++ * M[15]
++ * M[14]
++ * M[13]
++ * ...
++ * M[0] <-- r_M
++ * saved reg k-1
++ * saved reg k-2
++ * ...
++ * saved reg 0 <-- r_sp
++ * <no argument area>
++ *
++ * Packet layout
++ *
++ * <--------------------- len ------------------------>
++ * <--skb-len(r_skb_hl)-->< ----- skb->data_len ------>
++ * ----------------------------------------------------
++ * | skb->data |
++ * ----------------------------------------------------
++ */
++
++#define ptr typeof(unsigned long)
++
++#define SCRATCH_OFF(k) (4 * (k))
++
++/* JIT flags */
++#define SEEN_CALL (1 << BPF_MEMWORDS)
++#define SEEN_SREG_SFT (BPF_MEMWORDS + 1)
++#define SEEN_SREG_BASE (1 << SEEN_SREG_SFT)
++#define SEEN_SREG(x) (SEEN_SREG_BASE << (x))
++#define SEEN_OFF SEEN_SREG(2)
++#define SEEN_A SEEN_SREG(3)
++#define SEEN_X SEEN_SREG(4)
++#define SEEN_SKB SEEN_SREG(5)
++#define SEEN_MEM SEEN_SREG(6)
++/* SEEN_SK_DATA also implies skb_hl an skb_len */
++#define SEEN_SKB_DATA (SEEN_SREG(7) | SEEN_SREG(1) | SEEN_SREG(0))
++
++/* Arguments used by JIT */
++#define ARGS_USED_BY_JIT 2 /* only applicable to 64-bit */
++
++#define SBIT(x) (1 << (x)) /* Signed version of BIT() */
++
++/**
++ * struct jit_ctx - JIT context
++ * @skf: The sk_filter
++ * @prologue_bytes: Number of bytes for prologue
++ * @idx: Instruction index
++ * @flags: JIT flags
++ * @offsets: Instruction offsets
++ * @target: Memory location for the compiled filter
++ */
++struct jit_ctx {
++ const struct bpf_prog *skf;
++ unsigned int prologue_bytes;
++ u32 idx;
++ u32 flags;
++ u32 *offsets;
++ u32 *target;
++};
++
++
++static inline int optimize_div(u32 *k)
++{
++ /* power of 2 divides can be implemented with right shift */
++ if (!(*k & (*k-1))) {
++ *k = ilog2(*k);
++ return 1;
++ }
++
++ return 0;
++}
++
++static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx);
++
++/* Simply emit the instruction if the JIT memory space has been allocated */
++#define emit_instr(ctx, func, ...) \
++do { \
++ if ((ctx)->target != NULL) { \
++ u32 *p = &(ctx)->target[ctx->idx]; \
++ uasm_i_##func(&p, ##__VA_ARGS__); \
++ } \
++ (ctx)->idx++; \
++} while (0)
++
++/*
++ * Similar to emit_instr but it must be used when we need to emit
++ * 32-bit or 64-bit instructions
++ */
++#define emit_long_instr(ctx, func, ...) \
++do { \
++ if ((ctx)->target != NULL) { \
++ u32 *p = &(ctx)->target[ctx->idx]; \
++ UASM_i_##func(&p, ##__VA_ARGS__); \
++ } \
++ (ctx)->idx++; \
++} while (0)
++
++/* Determine if immediate is within the 16-bit signed range */
++static inline bool is_range16(s32 imm)
++{
++ return !(imm >= SBIT(15) || imm < -SBIT(15));
++}
++
++static inline void emit_addu(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, addu, dst, src1, src2);
++}
++
++static inline void emit_nop(struct jit_ctx *ctx)
++{
++ emit_instr(ctx, nop);
++}
++
++/* Load a u32 immediate to a register */
++static inline void emit_load_imm(unsigned int dst, u32 imm, struct jit_ctx *ctx)
++{
++ if (ctx->target != NULL) {
++ /* addiu can only handle s16 */
++ if (!is_range16(imm)) {
++ u32 *p = &ctx->target[ctx->idx];
++ uasm_i_lui(&p, r_tmp_imm, (s32)imm >> 16);
++ p = &ctx->target[ctx->idx + 1];
++ uasm_i_ori(&p, dst, r_tmp_imm, imm & 0xffff);
++ } else {
++ u32 *p = &ctx->target[ctx->idx];
++ uasm_i_addiu(&p, dst, r_zero, imm);
++ }
++ }
++ ctx->idx++;
++
++ if (!is_range16(imm))
++ ctx->idx++;
++}
++
++static inline void emit_or(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, or, dst, src1, src2);
++}
++
++static inline void emit_ori(unsigned int dst, unsigned src, u32 imm,
++ struct jit_ctx *ctx)
++{
++ if (imm >= BIT(16)) {
++ emit_load_imm(r_tmp, imm, ctx);
++ emit_or(dst, src, r_tmp, ctx);
++ } else {
++ emit_instr(ctx, ori, dst, src, imm);
++ }
++}
++
++static inline void emit_daddiu(unsigned int dst, unsigned int src,
++ int imm, struct jit_ctx *ctx)
++{
++ /*
++ * Only used for stack, so the imm is relatively small
++ * and it fits in 15-bits
++ */
++ emit_instr(ctx, daddiu, dst, src, imm);
++}
++
++static inline void emit_addiu(unsigned int dst, unsigned int src,
++ u32 imm, struct jit_ctx *ctx)
++{
++ if (!is_range16(imm)) {
++ emit_load_imm(r_tmp, imm, ctx);
++ emit_addu(dst, r_tmp, src, ctx);
++ } else {
++ emit_instr(ctx, addiu, dst, src, imm);
++ }
++}
++
++static inline void emit_and(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, and, dst, src1, src2);
++}
++
++static inline void emit_andi(unsigned int dst, unsigned int src,
++ u32 imm, struct jit_ctx *ctx)
++{
++ /* If imm does not fit in u16 then load it to register */
++ if (imm >= BIT(16)) {
++ emit_load_imm(r_tmp, imm, ctx);
++ emit_and(dst, src, r_tmp, ctx);
++ } else {
++ emit_instr(ctx, andi, dst, src, imm);
++ }
++}
++
++static inline void emit_xor(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, xor, dst, src1, src2);
++}
++
++static inline void emit_xori(ptr dst, ptr src, u32 imm, struct jit_ctx *ctx)
++{
++ /* If imm does not fit in u16 then load it to register */
++ if (imm >= BIT(16)) {
++ emit_load_imm(r_tmp, imm, ctx);
++ emit_xor(dst, src, r_tmp, ctx);
++ } else {
++ emit_instr(ctx, xori, dst, src, imm);
++ }
++}
++
++static inline void emit_stack_offset(int offset, struct jit_ctx *ctx)
++{
++ emit_long_instr(ctx, ADDIU, r_sp, r_sp, offset);
++}
++
++static inline void emit_subu(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, subu, dst, src1, src2);
++}
++
++static inline void emit_neg(unsigned int reg, struct jit_ctx *ctx)
++{
++ emit_subu(reg, r_zero, reg, ctx);
++}
++
++static inline void emit_sllv(unsigned int dst, unsigned int src,
++ unsigned int sa, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, sllv, dst, src, sa);
++}
++
++static inline void emit_sll(unsigned int dst, unsigned int src,
++ unsigned int sa, struct jit_ctx *ctx)
++{
++ /* sa is 5-bits long */
++ if (sa >= BIT(5))
++ /* Shifting >= 32 results in zero */
++ emit_jit_reg_move(dst, r_zero, ctx);
++ else
++ emit_instr(ctx, sll, dst, src, sa);
++}
++
++static inline void emit_srlv(unsigned int dst, unsigned int src,
++ unsigned int sa, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, srlv, dst, src, sa);
++}
++
++static inline void emit_srl(unsigned int dst, unsigned int src,
++ unsigned int sa, struct jit_ctx *ctx)
++{
++ /* sa is 5-bits long */
++ if (sa >= BIT(5))
++ /* Shifting >= 32 results in zero */
++ emit_jit_reg_move(dst, r_zero, ctx);
++ else
++ emit_instr(ctx, srl, dst, src, sa);
++}
++
++static inline void emit_slt(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, slt, dst, src1, src2);
++}
++
++static inline void emit_sltu(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, sltu, dst, src1, src2);
++}
++
++static inline void emit_sltiu(unsigned dst, unsigned int src,
++ unsigned int imm, struct jit_ctx *ctx)
++{
++ /* 16 bit immediate */
++ if (!is_range16((s32)imm)) {
++ emit_load_imm(r_tmp, imm, ctx);
++ emit_sltu(dst, src, r_tmp, ctx);
++ } else {
++ emit_instr(ctx, sltiu, dst, src, imm);
++ }
++
++}
++
++/* Store register on the stack */
++static inline void emit_store_stack_reg(ptr reg, ptr base,
++ unsigned int offset,
++ struct jit_ctx *ctx)
++{
++ emit_long_instr(ctx, SW, reg, offset, base);
++}
++
++static inline void emit_store(ptr reg, ptr base, unsigned int offset,
++ struct jit_ctx *ctx)
++{
++ emit_instr(ctx, sw, reg, offset, base);
++}
++
++static inline void emit_load_stack_reg(ptr reg, ptr base,
++ unsigned int offset,
++ struct jit_ctx *ctx)
++{
++ emit_long_instr(ctx, LW, reg, offset, base);
++}
++
++static inline void emit_load(unsigned int reg, unsigned int base,
++ unsigned int offset, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, lw, reg, offset, base);
++}
++
++static inline void emit_load_byte(unsigned int reg, unsigned int base,
++ unsigned int offset, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, lb, reg, offset, base);
++}
++
++static inline void emit_half_load(unsigned int reg, unsigned int base,
++ unsigned int offset, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, lh, reg, offset, base);
++}
++
++static inline void emit_half_load_unsigned(unsigned int reg, unsigned int base,
++ unsigned int offset, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, lhu, reg, offset, base);
++}
++
++static inline void emit_mul(unsigned int dst, unsigned int src1,
++ unsigned int src2, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, mul, dst, src1, src2);
++}
++
++static inline void emit_div(unsigned int dst, unsigned int src,
++ struct jit_ctx *ctx)
++{
++ if (ctx->target != NULL) {
++ u32 *p = &ctx->target[ctx->idx];
++ uasm_i_divu(&p, dst, src);
++ p = &ctx->target[ctx->idx + 1];
++ uasm_i_mflo(&p, dst);
++ }
++ ctx->idx += 2; /* 2 insts */
++}
++
++static inline void emit_mod(unsigned int dst, unsigned int src,
++ struct jit_ctx *ctx)
++{
++ if (ctx->target != NULL) {
++ u32 *p = &ctx->target[ctx->idx];
++ uasm_i_divu(&p, dst, src);
++ p = &ctx->target[ctx->idx + 1];
++ uasm_i_mfhi(&p, dst);
++ }
++ ctx->idx += 2; /* 2 insts */
++}
++
++static inline void emit_dsll(unsigned int dst, unsigned int src,
++ unsigned int sa, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, dsll, dst, src, sa);
++}
++
++static inline void emit_dsrl32(unsigned int dst, unsigned int src,
++ unsigned int sa, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, dsrl32, dst, src, sa);
++}
++
++static inline void emit_wsbh(unsigned int dst, unsigned int src,
++ struct jit_ctx *ctx)
++{
++ emit_instr(ctx, wsbh, dst, src);
++}
++
++/* load pointer to register */
++static inline void emit_load_ptr(unsigned int dst, unsigned int src,
++ int imm, struct jit_ctx *ctx)
++{
++ /* src contains the base addr of the 32/64-pointer */
++ emit_long_instr(ctx, LW, dst, imm, src);
++}
++
++/* load a function pointer to register */
++static inline void emit_load_func(unsigned int reg, ptr imm,
++ struct jit_ctx *ctx)
++{
++ if (IS_ENABLED(CONFIG_64BIT)) {
++ /* At this point imm is always 64-bit */
++ emit_load_imm(r_tmp, (u64)imm >> 32, ctx);
++ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
++ emit_ori(r_tmp, r_tmp_imm, (imm >> 16) & 0xffff, ctx);
++ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */
++ emit_ori(reg, r_tmp_imm, imm & 0xffff, ctx);
++ } else {
++ emit_load_imm(reg, imm, ctx);
++ }
++}
++
++/* Move to real MIPS register */
++static inline void emit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
++{
++ emit_long_instr(ctx, ADDU, dst, src, r_zero);
++}
++
++/* Move to JIT (32-bit) register */
++static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx)
++{
++ emit_addu(dst, src, r_zero, ctx);
++}
++
++/* Compute the immediate value for PC-relative branches. */
++static inline u32 b_imm(unsigned int tgt, struct jit_ctx *ctx)
++{
++ if (ctx->target == NULL)
++ return 0;
++
++ /*
++ * We want a pc-relative branch. We only do forward branches
++ * so tgt is always after pc. tgt is the instruction offset
++ * we want to jump to.
++
++ * Branch on MIPS:
++ * I: target_offset <- sign_extend(offset)
++ * I+1: PC += target_offset (delay slot)
++ *
++ * ctx->idx currently points to the branch instruction
++ * but the offset is added to the delay slot so we need
++ * to subtract 4.
++ */
++ return ctx->offsets[tgt] -
++ (ctx->idx * 4 - ctx->prologue_bytes) - 4;
++}
++
++static inline void emit_bcond(int cond, unsigned int reg1, unsigned int reg2,
++ unsigned int imm, struct jit_ctx *ctx)
++{
++ if (ctx->target != NULL) {
++ u32 *p = &ctx->target[ctx->idx];
++
++ switch (cond) {
++ case MIPS_COND_EQ:
++ uasm_i_beq(&p, reg1, reg2, imm);
++ break;
++ case MIPS_COND_NE:
++ uasm_i_bne(&p, reg1, reg2, imm);
++ break;
++ case MIPS_COND_ALL:
++ uasm_i_b(&p, imm);
++ break;
++ default:
++ pr_warn("%s: Unhandled branch conditional: %d\n",
++ __func__, cond);
++ }
++ }
++ ctx->idx++;
++}
++
++static inline void emit_b(unsigned int imm, struct jit_ctx *ctx)
++{
++ emit_bcond(MIPS_COND_ALL, r_zero, r_zero, imm, ctx);
++}
++
++static inline void emit_jalr(unsigned int link, unsigned int reg,
++ struct jit_ctx *ctx)
++{
++ emit_instr(ctx, jalr, link, reg);
++}
++
++static inline void emit_jr(unsigned int reg, struct jit_ctx *ctx)
++{
++ emit_instr(ctx, jr, reg);
++}
++
++static inline u16 align_sp(unsigned int num)
++{
++ /* Double word alignment for 32-bit, quadword for 64-bit */
++ unsigned int align = IS_ENABLED(CONFIG_64BIT) ? 16 : 8;
++ num = (num + (align - 1)) & -align;
++ return num;
++}
++
++static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset)
++{
++ int i = 0, real_off = 0;
++ u32 sflags, tmp_flags;
++
++ /* Adjust the stack pointer */
++ if (offset)
++ emit_stack_offset(-align_sp(offset), ctx);
++
++ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
++ /* sflags is essentially a bitmap */
++ while (tmp_flags) {
++ if ((sflags >> i) & 0x1) {
++ emit_store_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
++ ctx);
++ real_off += SZREG;
++ }
++ i++;
++ tmp_flags >>= 1;
++ }
++
++ /* save return address */
++ if (ctx->flags & SEEN_CALL) {
++ emit_store_stack_reg(r_ra, r_sp, real_off, ctx);
++ real_off += SZREG;
++ }
++
++ /* Setup r_M leaving the alignment gap if necessary */
++ if (ctx->flags & SEEN_MEM) {
++ if (real_off % (SZREG * 2))
++ real_off += SZREG;
++ emit_long_instr(ctx, ADDIU, r_M, r_sp, real_off);
++ }
++}
++
++static void restore_bpf_jit_regs(struct jit_ctx *ctx,
++ unsigned int offset)
++{
++ int i, real_off = 0;
++ u32 sflags, tmp_flags;
++
++ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT;
++ /* sflags is a bitmap */
++ i = 0;
++ while (tmp_flags) {
++ if ((sflags >> i) & 0x1) {
++ emit_load_stack_reg(MIPS_R_S0 + i, r_sp, real_off,
++ ctx);
++ real_off += SZREG;
++ }
++ i++;
++ tmp_flags >>= 1;
++ }
++
++ /* restore return address */
++ if (ctx->flags & SEEN_CALL)
++ emit_load_stack_reg(r_ra, r_sp, real_off, ctx);
++
++ /* Restore the sp and discard the scrach memory */
++ if (offset)
++ emit_stack_offset(align_sp(offset), ctx);
++}
++
++static unsigned int get_stack_depth(struct jit_ctx *ctx)
++{
++ int sp_off = 0;
++
++
++ /* How may s* regs do we need to preserved? */
++ sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * SZREG;
++
++ if (ctx->flags & SEEN_MEM)
++ sp_off += 4 * BPF_MEMWORDS; /* BPF_MEMWORDS are 32-bit */
++
++ if (ctx->flags & SEEN_CALL)
++ sp_off += SZREG; /* Space for our ra register */
++
++ return sp_off;
++}
++
++static void build_prologue(struct jit_ctx *ctx)
++{
++ int sp_off;
++
++ /* Calculate the total offset for the stack pointer */
++ sp_off = get_stack_depth(ctx);
++ save_bpf_jit_regs(ctx, sp_off);
++
++ if (ctx->flags & SEEN_SKB)
++ emit_reg_move(r_skb, MIPS_R_A0, ctx);
++
++ if (ctx->flags & SEEN_SKB_DATA) {
++ /* Load packet length */
++ emit_load(r_skb_len, r_skb, offsetof(struct sk_buff, len),
++ ctx);
++ emit_load(r_tmp, r_skb, offsetof(struct sk_buff, data_len),
++ ctx);
++ /* Load the data pointer */
++ emit_load_ptr(r_skb_data, r_skb,
++ offsetof(struct sk_buff, data), ctx);
++ /* Load the header length */
++ emit_subu(r_skb_hl, r_skb_len, r_tmp, ctx);
++ }
++
++ if (ctx->flags & SEEN_X)
++ emit_jit_reg_move(r_X, r_zero, ctx);
++
++ /*
++ * Do not leak kernel data to userspace, we only need to clear
++ * r_A if it is ever used. In fact if it is never used, we
++ * will not save/restore it, so clearing it in this case would
++ * corrupt the state of the caller.
++ */
++ if (bpf_needs_clear_a(&ctx->skf->insns[0]) &&
++ (ctx->flags & SEEN_A))
++ emit_jit_reg_move(r_A, r_zero, ctx);
++}
++
++static void build_epilogue(struct jit_ctx *ctx)
++{
++ unsigned int sp_off;
++
++ /* Calculate the total offset for the stack pointer */
++
++ sp_off = get_stack_depth(ctx);
++ restore_bpf_jit_regs(ctx, sp_off);
++
++ /* Return */
++ emit_jr(r_ra, ctx);
++ emit_nop(ctx);
++}
++
++#define CHOOSE_LOAD_FUNC(K, func) \
++ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \
++ func##_positive)
++
++static int build_body(struct jit_ctx *ctx)
++{
++ const struct bpf_prog *prog = ctx->skf;
++ const struct sock_filter *inst;
++ unsigned int i, off, condt;
++ u32 k, b_off __maybe_unused;
++ u8 (*sk_load_func)(unsigned long *skb, int offset);
++
++ for (i = 0; i < prog->len; i++) {
++ u16 code;
++
++ inst = &(prog->insns[i]);
++ pr_debug("%s: code->0x%02x, jt->0x%x, jf->0x%x, k->0x%x\n",
++ __func__, inst->code, inst->jt, inst->jf, inst->k);
++ k = inst->k;
++ code = bpf_anc_helper(inst);
++
++ if (ctx->target == NULL)
++ ctx->offsets[i] = ctx->idx * 4;
++
++ switch (code) {
++ case BPF_LD | BPF_IMM:
++ /* A <- k ==> li r_A, k */
++ ctx->flags |= SEEN_A;
++ emit_load_imm(r_A, k, ctx);
++ break;
++ case BPF_LD | BPF_W | BPF_LEN:
++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4);
++ /* A <- len ==> lw r_A, offset(skb) */
++ ctx->flags |= SEEN_SKB | SEEN_A;
++ off = offsetof(struct sk_buff, len);
++ emit_load(r_A, r_skb, off, ctx);
++ break;
++ case BPF_LD | BPF_MEM:
++ /* A <- M[k] ==> lw r_A, offset(M) */
++ ctx->flags |= SEEN_MEM | SEEN_A;
++ emit_load(r_A, r_M, SCRATCH_OFF(k), ctx);
++ break;
++ case BPF_LD | BPF_W | BPF_ABS:
++ /* A <- P[k:4] */
++ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_word);
++ goto load;
++ case BPF_LD | BPF_H | BPF_ABS:
++ /* A <- P[k:2] */
++ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_half);
++ goto load;
++ case BPF_LD | BPF_B | BPF_ABS:
++ /* A <- P[k:1] */
++ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_byte);
++load:
++ emit_load_imm(r_off, k, ctx);
++load_common:
++ ctx->flags |= SEEN_CALL | SEEN_OFF |
++ SEEN_SKB | SEEN_A | SEEN_SKB_DATA;
++
++ emit_load_func(r_s0, (ptr)sk_load_func, ctx);
++ emit_reg_move(MIPS_R_A0, r_skb, ctx);
++ emit_jalr(MIPS_R_RA, r_s0, ctx);
++ /* Load second argument to delay slot */
++ emit_reg_move(MIPS_R_A1, r_off, ctx);
++ /* Check the error value */
++ emit_bcond(MIPS_COND_EQ, r_ret, 0, b_imm(i + 1, ctx),
++ ctx);
++ /* Load return register on DS for failures */
++ emit_reg_move(r_ret, r_zero, ctx);
++ /* Return with error */
++ emit_b(b_imm(prog->len, ctx), ctx);
++ emit_nop(ctx);
++ break;
++ case BPF_LD | BPF_W | BPF_IND:
++ /* A <- P[X + k:4] */
++ sk_load_func = sk_load_word;
++ goto load_ind;
++ case BPF_LD | BPF_H | BPF_IND:
++ /* A <- P[X + k:2] */
++ sk_load_func = sk_load_half;
++ goto load_ind;
++ case BPF_LD | BPF_B | BPF_IND:
++ /* A <- P[X + k:1] */
++ sk_load_func = sk_load_byte;
++load_ind:
++ ctx->flags |= SEEN_OFF | SEEN_X;
++ emit_addiu(r_off, r_X, k, ctx);
++ goto load_common;
++ case BPF_LDX | BPF_IMM:
++ /* X <- k */
++ ctx->flags |= SEEN_X;
++ emit_load_imm(r_X, k, ctx);
++ break;
++ case BPF_LDX | BPF_MEM:
++ /* X <- M[k] */
++ ctx->flags |= SEEN_X | SEEN_MEM;
++ emit_load(r_X, r_M, SCRATCH_OFF(k), ctx);
++ break;
++ case BPF_LDX | BPF_W | BPF_LEN:
++ /* X <- len */
++ ctx->flags |= SEEN_X | SEEN_SKB;
++ off = offsetof(struct sk_buff, len);
++ emit_load(r_X, r_skb, off, ctx);
++ break;
++ case BPF_LDX | BPF_B | BPF_MSH:
++ /* X <- 4 * (P[k:1] & 0xf) */
++ ctx->flags |= SEEN_X | SEEN_CALL | SEEN_SKB;
++ /* Load offset to a1 */
++ emit_load_func(r_s0, (ptr)sk_load_byte, ctx);
++ /*
++ * This may emit two instructions so it may not fit
++ * in the delay slot. So use a0 in the delay slot.
++ */
++ emit_load_imm(MIPS_R_A1, k, ctx);
++ emit_jalr(MIPS_R_RA, r_s0, ctx);
++ emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */
++ /* Check the error value */
++ emit_bcond(MIPS_COND_NE, r_ret, 0,
++ b_imm(prog->len, ctx), ctx);
++ emit_reg_move(r_ret, r_zero, ctx);
++ /* We are good */
++ /* X <- P[1:K] & 0xf */
++ emit_andi(r_X, r_A, 0xf, ctx);
++ /* X << 2 */
++ emit_b(b_imm(i + 1, ctx), ctx);
++ emit_sll(r_X, r_X, 2, ctx); /* delay slot */
++ break;
++ case BPF_ST:
++ /* M[k] <- A */
++ ctx->flags |= SEEN_MEM | SEEN_A;
++ emit_store(r_A, r_M, SCRATCH_OFF(k), ctx);
++ break;
++ case BPF_STX:
++ /* M[k] <- X */
++ ctx->flags |= SEEN_MEM | SEEN_X;
++ emit_store(r_X, r_M, SCRATCH_OFF(k), ctx);
++ break;
++ case BPF_ALU | BPF_ADD | BPF_K:
++ /* A += K */
++ ctx->flags |= SEEN_A;
++ emit_addiu(r_A, r_A, k, ctx);
++ break;
++ case BPF_ALU | BPF_ADD | BPF_X:
++ /* A += X */
++ ctx->flags |= SEEN_A | SEEN_X;
++ emit_addu(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_SUB | BPF_K:
++ /* A -= K */
++ ctx->flags |= SEEN_A;
++ emit_addiu(r_A, r_A, -k, ctx);
++ break;
++ case BPF_ALU | BPF_SUB | BPF_X:
++ /* A -= X */
++ ctx->flags |= SEEN_A | SEEN_X;
++ emit_subu(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_MUL | BPF_K:
++ /* A *= K */
++ /* Load K to scratch register before MUL */
++ ctx->flags |= SEEN_A;
++ emit_load_imm(r_s0, k, ctx);
++ emit_mul(r_A, r_A, r_s0, ctx);
++ break;
++ case BPF_ALU | BPF_MUL | BPF_X:
++ /* A *= X */
++ ctx->flags |= SEEN_A | SEEN_X;
++ emit_mul(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_DIV | BPF_K:
++ /* A /= k */
++ if (k == 1)
++ break;
++ if (optimize_div(&k)) {
++ ctx->flags |= SEEN_A;
++ emit_srl(r_A, r_A, k, ctx);
++ break;
++ }
++ ctx->flags |= SEEN_A;
++ emit_load_imm(r_s0, k, ctx);
++ emit_div(r_A, r_s0, ctx);
++ break;
++ case BPF_ALU | BPF_MOD | BPF_K:
++ /* A %= k */
++ if (k == 1) {
++ ctx->flags |= SEEN_A;
++ emit_jit_reg_move(r_A, r_zero, ctx);
++ } else {
++ ctx->flags |= SEEN_A;
++ emit_load_imm(r_s0, k, ctx);
++ emit_mod(r_A, r_s0, ctx);
++ }
++ break;
++ case BPF_ALU | BPF_DIV | BPF_X:
++ /* A /= X */
++ ctx->flags |= SEEN_X | SEEN_A;
++ /* Check if r_X is zero */
++ emit_bcond(MIPS_COND_EQ, r_X, r_zero,
++ b_imm(prog->len, ctx), ctx);
++ emit_load_imm(r_ret, 0, ctx); /* delay slot */
++ emit_div(r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_MOD | BPF_X:
++ /* A %= X */
++ ctx->flags |= SEEN_X | SEEN_A;
++ /* Check if r_X is zero */
++ emit_bcond(MIPS_COND_EQ, r_X, r_zero,
++ b_imm(prog->len, ctx), ctx);
++ emit_load_imm(r_ret, 0, ctx); /* delay slot */
++ emit_mod(r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_OR | BPF_K:
++ /* A |= K */
++ ctx->flags |= SEEN_A;
++ emit_ori(r_A, r_A, k, ctx);
++ break;
++ case BPF_ALU | BPF_OR | BPF_X:
++ /* A |= X */
++ ctx->flags |= SEEN_A;
++ emit_ori(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_XOR | BPF_K:
++ /* A ^= k */
++ ctx->flags |= SEEN_A;
++ emit_xori(r_A, r_A, k, ctx);
++ break;
++ case BPF_ANC | SKF_AD_ALU_XOR_X:
++ case BPF_ALU | BPF_XOR | BPF_X:
++ /* A ^= X */
++ ctx->flags |= SEEN_A;
++ emit_xor(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_AND | BPF_K:
++ /* A &= K */
++ ctx->flags |= SEEN_A;
++ emit_andi(r_A, r_A, k, ctx);
++ break;
++ case BPF_ALU | BPF_AND | BPF_X:
++ /* A &= X */
++ ctx->flags |= SEEN_A | SEEN_X;
++ emit_and(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_LSH | BPF_K:
++ /* A <<= K */
++ ctx->flags |= SEEN_A;
++ emit_sll(r_A, r_A, k, ctx);
++ break;
++ case BPF_ALU | BPF_LSH | BPF_X:
++ /* A <<= X */
++ ctx->flags |= SEEN_A | SEEN_X;
++ emit_sllv(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_RSH | BPF_K:
++ /* A >>= K */
++ ctx->flags |= SEEN_A;
++ emit_srl(r_A, r_A, k, ctx);
++ break;
++ case BPF_ALU | BPF_RSH | BPF_X:
++ ctx->flags |= SEEN_A | SEEN_X;
++ emit_srlv(r_A, r_A, r_X, ctx);
++ break;
++ case BPF_ALU | BPF_NEG:
++ /* A = -A */
++ ctx->flags |= SEEN_A;
++ emit_neg(r_A, ctx);
++ break;
++ case BPF_JMP | BPF_JA:
++ /* pc += K */
++ emit_b(b_imm(i + k + 1, ctx), ctx);
++ emit_nop(ctx);
++ break;
++ case BPF_JMP | BPF_JEQ | BPF_K:
++ /* pc += ( A == K ) ? pc->jt : pc->jf */
++ condt = MIPS_COND_EQ | MIPS_COND_K;
++ goto jmp_cmp;
++ case BPF_JMP | BPF_JEQ | BPF_X:
++ ctx->flags |= SEEN_X;
++ /* pc += ( A == X ) ? pc->jt : pc->jf */
++ condt = MIPS_COND_EQ | MIPS_COND_X;
++ goto jmp_cmp;
++ case BPF_JMP | BPF_JGE | BPF_K:
++ /* pc += ( A >= K ) ? pc->jt : pc->jf */
++ condt = MIPS_COND_GE | MIPS_COND_K;
++ goto jmp_cmp;
++ case BPF_JMP | BPF_JGE | BPF_X:
++ ctx->flags |= SEEN_X;
++ /* pc += ( A >= X ) ? pc->jt : pc->jf */
++ condt = MIPS_COND_GE | MIPS_COND_X;
++ goto jmp_cmp;
++ case BPF_JMP | BPF_JGT | BPF_K:
++ /* pc += ( A > K ) ? pc->jt : pc->jf */
++ condt = MIPS_COND_GT | MIPS_COND_K;
++ goto jmp_cmp;
++ case BPF_JMP | BPF_JGT | BPF_X:
++ ctx->flags |= SEEN_X;
++ /* pc += ( A > X ) ? pc->jt : pc->jf */
++ condt = MIPS_COND_GT | MIPS_COND_X;
++jmp_cmp:
++ /* Greater or Equal */
++ if ((condt & MIPS_COND_GE) ||
++ (condt & MIPS_COND_GT)) {
++ if (condt & MIPS_COND_K) { /* K */
++ ctx->flags |= SEEN_A;
++ emit_sltiu(r_s0, r_A, k, ctx);
++ } else { /* X */
++ ctx->flags |= SEEN_A |
++ SEEN_X;
++ emit_sltu(r_s0, r_A, r_X, ctx);
++ }
++ /* A < (K|X) ? r_scrach = 1 */
++ b_off = b_imm(i + inst->jf + 1, ctx);
++ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off,
++ ctx);
++ emit_nop(ctx);
++ /* A > (K|X) ? scratch = 0 */
++ if (condt & MIPS_COND_GT) {
++ /* Checking for equality */
++ ctx->flags |= SEEN_A | SEEN_X;
++ if (condt & MIPS_COND_K)
++ emit_load_imm(r_s0, k, ctx);
++ else
++ emit_jit_reg_move(r_s0, r_X,
++ ctx);
++ b_off = b_imm(i + inst->jf + 1, ctx);
++ emit_bcond(MIPS_COND_EQ, r_A, r_s0,
++ b_off, ctx);
++ emit_nop(ctx);
++ /* Finally, A > K|X */
++ b_off = b_imm(i + inst->jt + 1, ctx);
++ emit_b(b_off, ctx);
++ emit_nop(ctx);
++ } else {
++ /* A >= (K|X) so jump */
++ b_off = b_imm(i + inst->jt + 1, ctx);
++ emit_b(b_off, ctx);
++ emit_nop(ctx);
++ }
++ } else {
++ /* A == K|X */
++ if (condt & MIPS_COND_K) { /* K */
++ ctx->flags |= SEEN_A;
++ emit_load_imm(r_s0, k, ctx);
++ /* jump true */
++ b_off = b_imm(i + inst->jt + 1, ctx);
++ emit_bcond(MIPS_COND_EQ, r_A, r_s0,
++ b_off, ctx);
++ emit_nop(ctx);
++ /* jump false */
++ b_off = b_imm(i + inst->jf + 1,
++ ctx);
++ emit_bcond(MIPS_COND_NE, r_A, r_s0,
++ b_off, ctx);
++ emit_nop(ctx);
++ } else { /* X */
++ /* jump true */
++ ctx->flags |= SEEN_A | SEEN_X;
++ b_off = b_imm(i + inst->jt + 1,
++ ctx);
++ emit_bcond(MIPS_COND_EQ, r_A, r_X,
++ b_off, ctx);
++ emit_nop(ctx);
++ /* jump false */
++ b_off = b_imm(i + inst->jf + 1, ctx);
++ emit_bcond(MIPS_COND_NE, r_A, r_X,
++ b_off, ctx);
++ emit_nop(ctx);
++ }
++ }
++ break;
++ case BPF_JMP | BPF_JSET | BPF_K:
++ ctx->flags |= SEEN_A;
++ /* pc += (A & K) ? pc -> jt : pc -> jf */
++ emit_load_imm(r_s1, k, ctx);
++ emit_and(r_s0, r_A, r_s1, ctx);
++ /* jump true */
++ b_off = b_imm(i + inst->jt + 1, ctx);
++ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
++ emit_nop(ctx);
++ /* jump false */
++ b_off = b_imm(i + inst->jf + 1, ctx);
++ emit_b(b_off, ctx);
++ emit_nop(ctx);
++ break;
++ case BPF_JMP | BPF_JSET | BPF_X:
++ ctx->flags |= SEEN_X | SEEN_A;
++ /* pc += (A & X) ? pc -> jt : pc -> jf */
++ emit_and(r_s0, r_A, r_X, ctx);
++ /* jump true */
++ b_off = b_imm(i + inst->jt + 1, ctx);
++ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx);
++ emit_nop(ctx);
++ /* jump false */
++ b_off = b_imm(i + inst->jf + 1, ctx);
++ emit_b(b_off, ctx);
++ emit_nop(ctx);
++ break;
++ case BPF_RET | BPF_A:
++ ctx->flags |= SEEN_A;
++ if (i != prog->len - 1)
++ /*
++ * If this is not the last instruction
++ * then jump to the epilogue
++ */
++ emit_b(b_imm(prog->len, ctx), ctx);
++ emit_reg_move(r_ret, r_A, ctx); /* delay slot */
++ break;
++ case BPF_RET | BPF_K:
++ /*
++ * It can emit two instructions so it does not fit on
++ * the delay slot.
++ */
++ emit_load_imm(r_ret, k, ctx);
++ if (i != prog->len - 1) {
++ /*
++ * If this is not the last instruction
++ * then jump to the epilogue
++ */
++ emit_b(b_imm(prog->len, ctx), ctx);
++ emit_nop(ctx);
++ }
++ break;
++ case BPF_MISC | BPF_TAX:
++ /* X = A */
++ ctx->flags |= SEEN_X | SEEN_A;
++ emit_jit_reg_move(r_X, r_A, ctx);
++ break;
++ case BPF_MISC | BPF_TXA:
++ /* A = X */
++ ctx->flags |= SEEN_A | SEEN_X;
++ emit_jit_reg_move(r_A, r_X, ctx);
++ break;
++ /* AUX */
++ case BPF_ANC | SKF_AD_PROTOCOL:
++ /* A = ntohs(skb->protocol */
++ ctx->flags |= SEEN_SKB | SEEN_OFF | SEEN_A;
++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
++ protocol) != 2);
++ off = offsetof(struct sk_buff, protocol);
++ emit_half_load(r_A, r_skb, off, ctx);
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++ /* This needs little endian fixup */
++ if (cpu_has_wsbh) {
++ /* R2 and later have the wsbh instruction */
++ emit_wsbh(r_A, r_A, ctx);
++ } else {
++ /* Get first byte */
++ emit_andi(r_tmp_imm, r_A, 0xff, ctx);
++ /* Shift it */
++ emit_sll(r_tmp, r_tmp_imm, 8, ctx);
++ /* Get second byte */
++ emit_srl(r_tmp_imm, r_A, 8, ctx);
++ emit_andi(r_tmp_imm, r_tmp_imm, 0xff, ctx);
++ /* Put everyting together in r_A */
++ emit_or(r_A, r_tmp, r_tmp_imm, ctx);
++ }
++#endif
++ break;
++ case BPF_ANC | SKF_AD_CPU:
++ ctx->flags |= SEEN_A | SEEN_OFF;
++ /* A = current_thread_info()->cpu */
++ BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info,
++ cpu) != 4);
++ off = offsetof(struct thread_info, cpu);
++ /* $28/gp points to the thread_info struct */
++ emit_load(r_A, 28, off, ctx);
++ break;
++ case BPF_ANC | SKF_AD_IFINDEX:
++ /* A = skb->dev->ifindex */
++ case BPF_ANC | SKF_AD_HATYPE:
++ /* A = skb->dev->type */
++ ctx->flags |= SEEN_SKB | SEEN_A;
++ off = offsetof(struct sk_buff, dev);
++ /* Load *dev pointer */
++ emit_load_ptr(r_s0, r_skb, off, ctx);
++ /* error (0) in the delay slot */
++ emit_bcond(MIPS_COND_EQ, r_s0, r_zero,
++ b_imm(prog->len, ctx), ctx);
++ emit_reg_move(r_ret, r_zero, ctx);
++ if (code == (BPF_ANC | SKF_AD_IFINDEX)) {
++ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4);
++ off = offsetof(struct net_device, ifindex);
++ emit_load(r_A, r_s0, off, ctx);
++ } else { /* (code == (BPF_ANC | SKF_AD_HATYPE) */
++ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, type) != 2);
++ off = offsetof(struct net_device, type);
++ emit_half_load_unsigned(r_A, r_s0, off, ctx);
++ }
++ break;
++ case BPF_ANC | SKF_AD_MARK:
++ ctx->flags |= SEEN_SKB | SEEN_A;
++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4);
++ off = offsetof(struct sk_buff, mark);
++ emit_load(r_A, r_skb, off, ctx);
++ break;
++ case BPF_ANC | SKF_AD_RXHASH:
++ ctx->flags |= SEEN_SKB | SEEN_A;
++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4);
++ off = offsetof(struct sk_buff, hash);
++ emit_load(r_A, r_skb, off, ctx);
++ break;
++ case BPF_ANC | SKF_AD_VLAN_TAG:
++ ctx->flags |= SEEN_SKB | SEEN_A;
++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
++ vlan_tci) != 2);
++ off = offsetof(struct sk_buff, vlan_tci);
++ emit_half_load_unsigned(r_A, r_skb, off, ctx);
++ break;
++ case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT:
++ ctx->flags |= SEEN_SKB | SEEN_A;
++ emit_load_byte(r_A, r_skb, PKT_VLAN_PRESENT_OFFSET(), ctx);
++ if (PKT_VLAN_PRESENT_BIT)
++ emit_srl(r_A, r_A, PKT_VLAN_PRESENT_BIT, ctx);
++ if (PKT_VLAN_PRESENT_BIT < 7)
++ emit_andi(r_A, r_A, 1, ctx);
++ break;
++ case BPF_ANC | SKF_AD_PKTTYPE:
++ ctx->flags |= SEEN_SKB;
++
++ emit_load_byte(r_tmp, r_skb, PKT_TYPE_OFFSET(), ctx);
++ /* Keep only the last 3 bits */
++ emit_andi(r_A, r_tmp, PKT_TYPE_MAX, ctx);
++#ifdef __BIG_ENDIAN_BITFIELD
++ /* Get the actual packet type to the lower 3 bits */
++ emit_srl(r_A, r_A, 5, ctx);
++#endif
++ break;
++ case BPF_ANC | SKF_AD_QUEUE:
++ ctx->flags |= SEEN_SKB | SEEN_A;
++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff,
++ queue_mapping) != 2);
++ BUILD_BUG_ON(offsetof(struct sk_buff,
++ queue_mapping) > 0xff);
++ off = offsetof(struct sk_buff, queue_mapping);
++ emit_half_load_unsigned(r_A, r_skb, off, ctx);
++ break;
++ default:
++ pr_debug("%s: Unhandled opcode: 0x%02x\n", __FILE__,
++ inst->code);
++ return -1;
++ }
++ }
++
++ /* compute offsets only during the first pass */
++ if (ctx->target == NULL)
++ ctx->offsets[i] = ctx->idx * 4;
++
++ return 0;
++}
++
++void bpf_jit_compile(struct bpf_prog *fp)
++{
++ struct jit_ctx ctx;
++ unsigned int alloc_size, tmp_idx;
++
++ if (!bpf_jit_enable)
++ return;
++
++ memset(&ctx, 0, sizeof(ctx));
++
++ ctx.offsets = kcalloc(fp->len + 1, sizeof(*ctx.offsets), GFP_KERNEL);
++ if (ctx.offsets == NULL)
++ return;
++
++ ctx.skf = fp;
++
++ if (build_body(&ctx))
++ goto out;
++
++ tmp_idx = ctx.idx;
++ build_prologue(&ctx);
++ ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4;
++ /* just to complete the ctx.idx count */
++ build_epilogue(&ctx);
++
++ alloc_size = 4 * ctx.idx;
++ ctx.target = module_alloc(alloc_size);
++ if (ctx.target == NULL)
++ goto out;
++
++ /* Clean it */
++ memset(ctx.target, 0, alloc_size);
++
++ ctx.idx = 0;
++
++ /* Generate the actual JIT code */
++ build_prologue(&ctx);
++ build_body(&ctx);
++ build_epilogue(&ctx);
++
++ /* Update the icache */
++ flush_icache_range((ptr)ctx.target, (ptr)(ctx.target + ctx.idx));
++
++ if (bpf_jit_enable > 1)
++ /* Dump JIT code */
++ bpf_jit_dump(fp->len, alloc_size, 2, ctx.target);
++
++ fp->bpf_func = (void *)ctx.target;
++ fp->jited = 1;
++
++out:
++ kfree(ctx.offsets);
++}
++
++void bpf_jit_free(struct bpf_prog *fp)
++{
++ if (fp->jited)
++ module_memfree(fp->bpf_func);
++
++ bpf_prog_unlock_free(fp);
++}
+diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S
+new file mode 100644
+index 000000000000..57154c5883b6
+--- /dev/null
++++ b/arch/mips/net/bpf_jit_asm.S
+@@ -0,0 +1,285 @@
++/*
++ * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF
++ * compiler.
++ *
++ * Copyright (C) 2015 Imagination Technologies Ltd.
++ * Author: Markos Chandras <markos.chandras@imgtec.com>
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License as published by the
++ * Free Software Foundation; version 2 of the License.
++ */
++
++#include <asm/asm.h>
++#include <asm/isa-rev.h>
++#include <asm/regdef.h>
++#include "bpf_jit.h"
++
++/* ABI
++ *
++ * r_skb_hl skb header length
++ * r_skb_data skb data
++ * r_off(a1) offset register
++ * r_A BPF register A
++ * r_X PF register X
++ * r_skb(a0) *skb
++ * r_M *scratch memory
++ * r_skb_le skb length
++ * r_s0 Scratch register 0
++ * r_s1 Scratch register 1
++ *
++ * On entry:
++ * a0: *skb
++ * a1: offset (imm or imm + X)
++ *
++ * All non-BPF-ABI registers are free for use. On return, we only
++ * care about r_ret. The BPF-ABI registers are assumed to remain
++ * unmodified during the entire filter operation.
++ */
++
++#define skb a0
++#define offset a1
++#define SKF_LL_OFF (-0x200000) /* Can't include linux/filter.h in assembly */
++
++ /* We know better :) so prevent assembler reordering etc */
++ .set noreorder
++
++#define is_offset_negative(TYPE) \
++ /* If offset is negative we have more work to do */ \
++ slti t0, offset, 0; \
++ bgtz t0, bpf_slow_path_##TYPE##_neg; \
++ /* Be careful what follows in DS. */
++
++#define is_offset_in_header(SIZE, TYPE) \
++ /* Reading from header? */ \
++ addiu $r_s0, $r_skb_hl, -SIZE; \
++ slt t0, $r_s0, offset; \
++ bgtz t0, bpf_slow_path_##TYPE; \
++
++LEAF(sk_load_word)
++ is_offset_negative(word)
++FEXPORT(sk_load_word_positive)
++ is_offset_in_header(4, word)
++ /* Offset within header boundaries */
++ PTR_ADDU t1, $r_skb_data, offset
++ .set reorder
++ lw $r_A, 0(t1)
++ .set noreorder
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++# if MIPS_ISA_REV >= 2
++ wsbh t0, $r_A
++ rotr $r_A, t0, 16
++# else
++ sll t0, $r_A, 24
++ srl t1, $r_A, 24
++ srl t2, $r_A, 8
++ or t0, t0, t1
++ andi t2, t2, 0xff00
++ andi t1, $r_A, 0xff00
++ or t0, t0, t2
++ sll t1, t1, 8
++ or $r_A, t0, t1
++# endif
++#endif
++ jr $r_ra
++ move $r_ret, zero
++ END(sk_load_word)
++
++LEAF(sk_load_half)
++ is_offset_negative(half)
++FEXPORT(sk_load_half_positive)
++ is_offset_in_header(2, half)
++ /* Offset within header boundaries */
++ PTR_ADDU t1, $r_skb_data, offset
++ lhu $r_A, 0(t1)
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++# if MIPS_ISA_REV >= 2
++ wsbh $r_A, $r_A
++# else
++ sll t0, $r_A, 8
++ srl t1, $r_A, 8
++ andi t0, t0, 0xff00
++ or $r_A, t0, t1
++# endif
++#endif
++ jr $r_ra
++ move $r_ret, zero
++ END(sk_load_half)
++
++LEAF(sk_load_byte)
++ is_offset_negative(byte)
++FEXPORT(sk_load_byte_positive)
++ is_offset_in_header(1, byte)
++ /* Offset within header boundaries */
++ PTR_ADDU t1, $r_skb_data, offset
++ lbu $r_A, 0(t1)
++ jr $r_ra
++ move $r_ret, zero
++ END(sk_load_byte)
++
++/*
++ * call skb_copy_bits:
++ * (prototype in linux/skbuff.h)
++ *
++ * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len)
++ *
++ * o32 mandates we leave 4 spaces for argument registers in case
++ * the callee needs to use them. Even though we don't care about
++ * the argument registers ourselves, we need to allocate that space
++ * to remain ABI compliant since the callee may want to use that space.
++ * We also allocate 2 more spaces for $r_ra and our return register (*to).
++ *
++ * n64 is a bit different. The *caller* will allocate the space to preserve
++ * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no
++ * good reason but it does not matter that much really.
++ *
++ * (void *to) is returned in r_s0
++ *
++ */
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++#define DS_OFFSET(SIZE) (4 * SZREG)
++#else
++#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE))
++#endif
++#define bpf_slow_path_common(SIZE) \
++ /* Quick check. Are we within reasonable boundaries? */ \
++ LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \
++ sltu $r_s0, offset, $r_s1; \
++ beqz $r_s0, fault; \
++ /* Load 4th argument in DS */ \
++ LONG_ADDIU a3, zero, SIZE; \
++ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
++ PTR_LA t0, skb_copy_bits; \
++ PTR_S $r_ra, (5 * SZREG)($r_sp); \
++ /* Assign low slot to a2 */ \
++ PTR_ADDIU a2, $r_sp, DS_OFFSET(SIZE); \
++ jalr t0; \
++ /* Reset our destination slot (DS but it's ok) */ \
++ INT_S zero, (4 * SZREG)($r_sp); \
++ /* \
++ * skb_copy_bits returns 0 on success and -EFAULT \
++ * on error. Our data live in a2. Do not bother with \
++ * our data if an error has been returned. \
++ */ \
++ /* Restore our frame */ \
++ PTR_L $r_ra, (5 * SZREG)($r_sp); \
++ INT_L $r_s0, (4 * SZREG)($r_sp); \
++ bltz v0, fault; \
++ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
++ move $r_ret, zero; \
++
++NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp)
++ bpf_slow_path_common(4)
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++# if MIPS_ISA_REV >= 2
++ wsbh t0, $r_s0
++ jr $r_ra
++ rotr $r_A, t0, 16
++# else
++ sll t0, $r_s0, 24
++ srl t1, $r_s0, 24
++ srl t2, $r_s0, 8
++ or t0, t0, t1
++ andi t2, t2, 0xff00
++ andi t1, $r_s0, 0xff00
++ or t0, t0, t2
++ sll t1, t1, 8
++ jr $r_ra
++ or $r_A, t0, t1
++# endif
++#else
++ jr $r_ra
++ move $r_A, $r_s0
++#endif
++
++ END(bpf_slow_path_word)
++
++NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp)
++ bpf_slow_path_common(2)
++#ifdef CONFIG_CPU_LITTLE_ENDIAN
++# if MIPS_ISA_REV >= 2
++ jr $r_ra
++ wsbh $r_A, $r_s0
++# else
++ sll t0, $r_s0, 8
++ andi t1, $r_s0, 0xff00
++ andi t0, t0, 0xff00
++ srl t1, t1, 8
++ jr $r_ra
++ or $r_A, t0, t1
++# endif
++#else
++ jr $r_ra
++ move $r_A, $r_s0
++#endif
++
++ END(bpf_slow_path_half)
++
++NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp)
++ bpf_slow_path_common(1)
++ jr $r_ra
++ move $r_A, $r_s0
++
++ END(bpf_slow_path_byte)
++
++/*
++ * Negative entry points
++ */
++ .macro bpf_is_end_of_data
++ li t0, SKF_LL_OFF
++ /* Reading link layer data? */
++ slt t1, offset, t0
++ bgtz t1, fault
++ /* Be careful what follows in DS. */
++ .endm
++/*
++ * call skb_copy_bits:
++ * (prototype in linux/filter.h)
++ *
++ * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb,
++ * int k, unsigned int size)
++ *
++ * see above (bpf_slow_path_common) for ABI restrictions
++ */
++#define bpf_negative_common(SIZE) \
++ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \
++ PTR_LA t0, bpf_internal_load_pointer_neg_helper; \
++ PTR_S $r_ra, (5 * SZREG)($r_sp); \
++ jalr t0; \
++ li a2, SIZE; \
++ PTR_L $r_ra, (5 * SZREG)($r_sp); \
++ /* Check return pointer */ \
++ beqz v0, fault; \
++ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \
++ /* Preserve our pointer */ \
++ move $r_s0, v0; \
++ /* Set return value */ \
++ move $r_ret, zero; \
++
++bpf_slow_path_word_neg:
++ bpf_is_end_of_data
++NESTED(sk_load_word_negative, (6 * SZREG), $r_sp)
++ bpf_negative_common(4)
++ jr $r_ra
++ lw $r_A, 0($r_s0)
++ END(sk_load_word_negative)
++
++bpf_slow_path_half_neg:
++ bpf_is_end_of_data
++NESTED(sk_load_half_negative, (6 * SZREG), $r_sp)
++ bpf_negative_common(2)
++ jr $r_ra
++ lhu $r_A, 0($r_s0)
++ END(sk_load_half_negative)
++
++bpf_slow_path_byte_neg:
++ bpf_is_end_of_data
++NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp)
++ bpf_negative_common(1)
++ jr $r_ra
++ lbu $r_A, 0($r_s0)
++ END(sk_load_byte_negative)
++
++fault:
++ jr $r_ra
++ addiu $r_ret, zero, 1
+--
+2.17.1
+
projects / openwrt / staging / pepe2k.git / commitdiff