Remove patches that have been upstreamed.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
+++ /dev/null
-From 28a1a6474c5053bae01bd29946b4d5ede539176b Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 31 Oct 2022 11:13:52 +0000
-Subject: [PATCH] dt-bindings: usb: Add H616 compatible string
-
-The Allwinner H616 contains four fully OHCI/EHCI compatible USB host
-controllers, so just add their compatible strings to the list of
-generic OHCI/EHCI controllers.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
-Link: https://lore.kernel.org/r/20221031111358.3387297-2-andre.przywara@arm.com
-Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
----
- Documentation/devicetree/bindings/usb/generic-ehci.yaml | 1 +
- Documentation/devicetree/bindings/usb/generic-ohci.yaml | 1 +
- 2 files changed, 2 insertions(+)
-
---- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
-+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
-@@ -30,6 +30,7 @@ properties:
- - allwinner,sun4i-a10-ehci
- - allwinner,sun50i-a64-ehci
- - allwinner,sun50i-h6-ehci
-+ - allwinner,sun50i-h616-ehci
- - allwinner,sun5i-a13-ehci
- - allwinner,sun6i-a31-ehci
- - allwinner,sun7i-a20-ehci
---- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
-+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
-@@ -20,6 +20,7 @@ properties:
- - allwinner,sun4i-a10-ohci
- - allwinner,sun50i-a64-ohci
- - allwinner,sun50i-h6-ohci
-+ - allwinner,sun50i-h616-ohci
- - allwinner,sun5i-a13-ohci
- - allwinner,sun6i-a31-ohci
- - allwinner,sun7i-a20-ohci
+++ /dev/null
-From 6964affe65066651eca21e97247d3b7cac5153dc Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 31 Oct 2022 11:13:53 +0000
-Subject: [PATCH] dt-bindings: phy: Add special clock for Allwinner H616 PHY
-
-The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves
-some resources from port 2's PHY and HCI IP. In particular the PMU clock
-for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL
-register of port 2. To allow each USB port to be controlled
-independently of port 2, we need a handle to that particular PMU clock
-in the *PHY* node, as the HCI and PHY part might be handled by separate
-drivers.
-
-Add that clock to the requirements of the H616 PHY binding, so that a
-PHY driver can apply the quirk in isolation, without requiring help from
-port 2's HCI driver.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: Rob Herring <robh@kernel.org>
-Link: https://lore.kernel.org/r/20221031111358.3387297-3-andre.przywara@arm.com
-Signed-off-by: Vinod Koul <vkoul@kernel.org>
----
- .../phy/allwinner,sun8i-h3-usb-phy.yaml | 26 +++++++++++++++++++
- 1 file changed, 26 insertions(+)
-
---- a/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
-+++ b/Documentation/devicetree/bindings/phy/allwinner,sun8i-h3-usb-phy.yaml
-@@ -36,18 +36,22 @@ properties:
- - const: pmu3
-
- clocks:
-+ minItems: 4
- items:
- - description: USB OTG PHY bus clock
- - description: USB Host 0 PHY bus clock
- - description: USB Host 1 PHY bus clock
- - description: USB Host 2 PHY bus clock
-+ - description: PMU clock for host port 2
-
- clock-names:
-+ minItems: 4
- items:
- - const: usb0_phy
- - const: usb1_phy
- - const: usb2_phy
- - const: usb3_phy
-+ - const: pmu2_clk
-
- resets:
- items:
-@@ -96,6 +100,28 @@ required:
- - resets
- - reset-names
-
-+allOf:
-+ - if:
-+ properties:
-+ compatible:
-+ contains:
-+ enum:
-+ - allwinner,sun50i-h616-usb-phy
-+ then:
-+ properties:
-+ clocks:
-+ minItems: 5
-+
-+ clock-names:
-+ minItems: 5
-+ else:
-+ properties:
-+ clocks:
-+ maxItems: 4
-+
-+ clock-names:
-+ maxItems: 4
-+
- additionalProperties: false
-
- examples:
+++ /dev/null
-From f40cf244c3feb4e1a442f8029b691add2c65b3ab Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 31 Oct 2022 11:13:56 +0000
-Subject: [PATCH] arm64: dts: allwinner: h616: Add USB nodes
-
-Add the nodes for the MUSB and the four USB host controllers to the SoC
-.dtsi, along with the PHY node needed to bind all of them together.
-
-EHCI/OHCI and MUSB are compatible to previous SoCs, but the PHY requires
-some quirks (handled in the driver).
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Link: https://lore.kernel.org/r/20221031111358.3387297-6-andre.przywara@arm.com
-Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
----
- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
- 1 file changed, 160 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -504,6 +504,166 @@
- };
- };
-
-+ usbotg: usb@5100000 {
-+ compatible = "allwinner,sun50i-h616-musb",
-+ "allwinner,sun8i-h3-musb";
-+ reg = <0x05100000 0x0400>;
-+ clocks = <&ccu CLK_BUS_OTG>;
-+ resets = <&ccu RST_BUS_OTG>;
-+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-+ interrupt-names = "mc";
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ extcon = <&usbphy 0>;
-+ status = "disabled";
-+ };
-+
-+ usbphy: phy@5100400 {
-+ compatible = "allwinner,sun50i-h616-usb-phy";
-+ reg = <0x05100400 0x24>,
-+ <0x05101800 0x14>,
-+ <0x05200800 0x14>,
-+ <0x05310800 0x14>,
-+ <0x05311800 0x14>;
-+ reg-names = "phy_ctrl",
-+ "pmu0",
-+ "pmu1",
-+ "pmu2",
-+ "pmu3";
-+ clocks = <&ccu CLK_USB_PHY0>,
-+ <&ccu CLK_USB_PHY1>,
-+ <&ccu CLK_USB_PHY2>,
-+ <&ccu CLK_USB_PHY3>,
-+ <&ccu CLK_BUS_EHCI2>;
-+ clock-names = "usb0_phy",
-+ "usb1_phy",
-+ "usb2_phy",
-+ "usb3_phy",
-+ "pmu2_clk";
-+ resets = <&ccu RST_USB_PHY0>,
-+ <&ccu RST_USB_PHY1>,
-+ <&ccu RST_USB_PHY2>,
-+ <&ccu RST_USB_PHY3>;
-+ reset-names = "usb0_reset",
-+ "usb1_reset",
-+ "usb2_reset",
-+ "usb3_reset";
-+ status = "disabled";
-+ #phy-cells = <1>;
-+ };
-+
-+ ehci0: usb@5101000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05101000 0x100>;
-+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI0>,
-+ <&ccu CLK_BUS_EHCI0>,
-+ <&ccu CLK_USB_OHCI0>;
-+ resets = <&ccu RST_BUS_OHCI0>,
-+ <&ccu RST_BUS_EHCI0>;
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci0: usb@5101400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05101400 0x100>;
-+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI0>,
-+ <&ccu CLK_USB_OHCI0>;
-+ resets = <&ccu RST_BUS_OHCI0>;
-+ phys = <&usbphy 0>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci1: usb@5200000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05200000 0x100>;
-+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_BUS_EHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>,
-+ <&ccu RST_BUS_EHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci1: usb@5200400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05200400 0x100>;
-+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI1>,
-+ <&ccu CLK_USB_OHCI1>;
-+ resets = <&ccu RST_BUS_OHCI1>;
-+ phys = <&usbphy 1>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci2: usb@5310000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05310000 0x100>;
-+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI2>,
-+ <&ccu CLK_BUS_EHCI2>,
-+ <&ccu CLK_USB_OHCI2>;
-+ resets = <&ccu RST_BUS_OHCI2>,
-+ <&ccu RST_BUS_EHCI2>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci2: usb@5310400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05310400 0x100>;
-+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI2>,
-+ <&ccu CLK_USB_OHCI2>;
-+ resets = <&ccu RST_BUS_OHCI2>;
-+ phys = <&usbphy 2>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ehci3: usb@5311000 {
-+ compatible = "allwinner,sun50i-h616-ehci",
-+ "generic-ehci";
-+ reg = <0x05311000 0x100>;
-+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI3>,
-+ <&ccu CLK_BUS_EHCI3>,
-+ <&ccu CLK_USB_OHCI3>;
-+ resets = <&ccu RST_BUS_OHCI3>,
-+ <&ccu RST_BUS_EHCI3>;
-+ phys = <&usbphy 3>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
-+ ohci3: usb@5311400 {
-+ compatible = "allwinner,sun50i-h616-ohci",
-+ "generic-ohci";
-+ reg = <0x05311400 0x100>;
-+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&ccu CLK_BUS_OHCI3>,
-+ <&ccu CLK_USB_OHCI3>;
-+ resets = <&ccu RST_BUS_OHCI3>;
-+ phys = <&usbphy 3>;
-+ phy-names = "usb";
-+ status = "disabled";
-+ };
-+
- rtc: rtc@7000000 {
- compatible = "allwinner,sun50i-h616-rtc";
- reg = <0x07000000 0x400>;
+++ /dev/null
-From db5f028309ede13767e2ba356c1975ac37a4fd6c Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Mon, 31 Oct 2022 11:13:57 +0000
-Subject: [PATCH] arm64: dts: allwinner: h616: OrangePi Zero 2: Add USB nodes
-
-The OrangePi Zero 2 has one USB-A host port, VBUS is provided by
-a GPIO controlled regulator.
-The USB-C port is meant to power the board, but is also connected to
-the USB 0 port, which we configure as an MUSB peripheral.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Link: https://lore.kernel.org/r/20221031111358.3387297-7-andre.przywara@arm.com
-Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
----
- .../allwinner/sun50i-h616-orangepi-zero2.dts | 41 +++++++++++++++++++
- 1 file changed, 41 insertions(+)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -49,8 +49,24 @@
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- };
-+
-+ reg_usb1_vbus: regulator-usb1-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb1-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <®_vcc5v>;
-+ enable-active-high;
-+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
- };
-
-+/* USB 2 & 3 are on headers only. */
-+
- &emac0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ext_rgmii_pins>;
-@@ -76,6 +92,10 @@
- status = "okay";
- };
-
-+&ohci1 {
-+ status = "okay";
-+};
-+
- &r_rsb {
- status = "okay";
-
-@@ -211,3 +231,24 @@
- pinctrl-0 = <&uart0_ph_pins>;
- status = "okay";
- };
-+
-+&usbotg {
-+ /*
-+ * PHY0 pins are connected to a USB-C socket, but a role switch
-+ * is not implemented: both CC pins are pulled to GND.
-+ * The VBUS pins power the device, so a fixed peripheral mode
-+ * is the best choice.
-+ * The board can be powered via GPIOs, in this case port0 *can*
-+ * act as a host (with a cable/adapter ignoring CC), as VBUS is
-+ * then provided by the GPIOs. Any user of this setup would
-+ * need to adjust the DT accordingly: dr_mode set to "host",
-+ * enabling OHCI0 and EHCI0.
-+ */
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ status = "okay";
-+};
+++ /dev/null
-From 322bf103204b8f786547acbeed85569254e7088f Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Fri, 4 Aug 2023 18:08:54 +0100
-Subject: [PATCH] arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT
-
-The Orange Pi Zero 2 got a successor (Zero 3), which shares quite some
-DT nodes with the Zero 2, but comes with a different PMIC.
-
-Move the common parts (except the PMIC) into a new shared file, and
-include that from the existing board .dts file.
-
-No functional change, the generated DTB is the same, except for some
-phandle numbering differences.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Link: https://lore.kernel.org/r/20230804170856.1237202-2-andre.przywara@arm.com
-Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
----
- .../allwinner/sun50i-h616-orangepi-zero.dtsi | 134 ++++++++++++++++++
- .../allwinner/sun50i-h616-orangepi-zero2.dts | 119 +---------------
- 2 files changed, 135 insertions(+), 118 deletions(-)
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
-@@ -0,0 +1,134 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+/*
-+ * Copyright (C) 2020 Arm Ltd.
-+ *
-+ * DT nodes common between Orange Pi Zero 2 and Orange Pi Zero 3.
-+ * Excludes PMIC nodes and properties, since they are different between the two.
-+ */
-+
-+#include "sun50i-h616.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+ aliases {
-+ ethernet0 = &emac0;
-+ serial0 = &uart0;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+
-+ led-0 {
-+ function = LED_FUNCTION_POWER;
-+ color = <LED_COLOR_ID_RED>;
-+ gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
-+ default-state = "on";
-+ };
-+
-+ led-1 {
-+ function = LED_FUNCTION_STATUS;
-+ color = <LED_COLOR_ID_GREEN>;
-+ gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
-+ };
-+ };
-+
-+ reg_vcc5v: vcc5v {
-+ /* board wide 5V supply directly from the USB-C socket */
-+ compatible = "regulator-fixed";
-+ regulator-name = "vcc-5v";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb1_vbus: regulator-usb1-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb1-vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ vin-supply = <®_vcc5v>;
-+ enable-active-high;
-+ gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
-+ };
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+/* USB 2 & 3 are on headers only. */
-+
-+&emac0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ext_rgmii_pins>;
-+ phy-mode = "rgmii";
-+ phy-handle = <&ext_rgmii_phy>;
-+ allwinner,rx-delay-ps = <3100>;
-+ allwinner,tx-delay-ps = <700>;
-+ status = "okay";
-+};
-+
-+&mdio0 {
-+ ext_rgmii_phy: ethernet-phy@1 {
-+ compatible = "ethernet-phy-ieee802.3-c22";
-+ reg = <1>;
-+ };
-+};
-+
-+&mmc0 {
-+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ status = "okay";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
-+
-+ flash@0 {
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+ compatible = "jedec,spi-nor";
-+ reg = <0>;
-+ spi-max-frequency = <40000000>;
-+ };
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_ph_pins>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ /*
-+ * PHY0 pins are connected to a USB-C socket, but a role switch
-+ * is not implemented: both CC pins are pulled to GND.
-+ * The VBUS pins power the device, so a fixed peripheral mode
-+ * is the best choice.
-+ * The board can be powered via GPIOs, in this case port0 *can*
-+ * act as a host (with a cable/adapter ignoring CC), as VBUS is
-+ * then provided by the GPIOs. Any user of this setup would
-+ * need to adjust the DT accordingly: dr_mode set to "host",
-+ * enabling OHCI0 and EHCI0.
-+ */
-+ dr_mode = "peripheral";
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <®_usb1_vbus>;
-+ status = "okay";
-+};
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -5,95 +5,19 @@
-
- /dts-v1/;
-
--#include "sun50i-h616.dtsi"
--
--#include <dt-bindings/gpio/gpio.h>
--#include <dt-bindings/interrupt-controller/arm-gic.h>
--#include <dt-bindings/leds/common.h>
-+#include "sun50i-h616-orangepi-zero.dtsi"
-
- / {
- model = "OrangePi Zero2";
- compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
--
-- aliases {
-- ethernet0 = &emac0;
-- serial0 = &uart0;
-- };
--
-- chosen {
-- stdout-path = "serial0:115200n8";
-- };
--
-- leds {
-- compatible = "gpio-leds";
--
-- led-0 {
-- function = LED_FUNCTION_POWER;
-- color = <LED_COLOR_ID_RED>;
-- gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
-- default-state = "on";
-- };
--
-- led-1 {
-- function = LED_FUNCTION_STATUS;
-- color = <LED_COLOR_ID_GREEN>;
-- gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
-- };
-- };
--
-- reg_vcc5v: vcc5v {
-- /* board wide 5V supply directly from the USB-C socket */
-- compatible = "regulator-fixed";
-- regulator-name = "vcc-5v";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- regulator-always-on;
-- };
--
-- reg_usb1_vbus: regulator-usb1-vbus {
-- compatible = "regulator-fixed";
-- regulator-name = "usb1-vbus";
-- regulator-min-microvolt = <5000000>;
-- regulator-max-microvolt = <5000000>;
-- vin-supply = <®_vcc5v>;
-- enable-active-high;
-- gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
-- };
--};
--
--&ehci1 {
-- status = "okay";
- };
-
--/* USB 2 & 3 are on headers only. */
--
- &emac0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&ext_rgmii_pins>;
-- phy-mode = "rgmii";
-- phy-handle = <&ext_rgmii_phy>;
- phy-supply = <®_dcdce>;
-- allwinner,rx-delay-ps = <3100>;
-- allwinner,tx-delay-ps = <700>;
-- status = "okay";
--};
--
--&mdio0 {
-- ext_rgmii_phy: ethernet-phy@1 {
-- compatible = "ethernet-phy-ieee802.3-c22";
-- reg = <1>;
-- };
- };
-
- &mmc0 {
- vmmc-supply = <®_dcdce>;
-- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-- bus-width = <4>;
-- status = "okay";
--};
--
--&ohci1 {
-- status = "okay";
- };
-
- &r_rsb {
-@@ -211,44 +135,3 @@
- vcc-ph-supply = <®_aldo1>;
- vcc-pi-supply = <®_aldo1>;
- };
--
--&spi0 {
-- status = "okay";
-- pinctrl-names = "default";
-- pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
--
-- flash@0 {
-- #address-cells = <1>;
-- #size-cells = <1>;
-- compatible = "jedec,spi-nor";
-- reg = <0>;
-- spi-max-frequency = <40000000>;
-- };
--};
--
--&uart0 {
-- pinctrl-names = "default";
-- pinctrl-0 = <&uart0_ph_pins>;
-- status = "okay";
--};
--
--&usbotg {
-- /*
-- * PHY0 pins are connected to a USB-C socket, but a role switch
-- * is not implemented: both CC pins are pulled to GND.
-- * The VBUS pins power the device, so a fixed peripheral mode
-- * is the best choice.
-- * The board can be powered via GPIOs, in this case port0 *can*
-- * act as a host (with a cable/adapter ignoring CC), as VBUS is
-- * then provided by the GPIOs. Any user of this setup would
-- * need to adjust the DT accordingly: dr_mode set to "host",
-- * enabling OHCI0 and EHCI0.
-- */
-- dr_mode = "peripheral";
-- status = "okay";
--};
--
--&usbphy {
-- usb1_vbus-supply = <®_usb1_vbus>;
-- status = "okay";
--};
+++ /dev/null
-From f1b3ddb3ecc2eec1f912383e01156c226daacfab Mon Sep 17 00:00:00 2001
-From: Andre Przywara <andre.przywara@arm.com>
-Date: Fri, 4 Aug 2023 18:08:56 +0100
-Subject: [PATCH] arm64: dts: allwinner: h616: Add OrangePi Zero 3 board
- support
-
-The OrangePi Zero 3 is a development board based on the Allwinner H618 SoC,
-which seems to be just an H616 with more L2 cache. The board itself is a
-slightly updated version of the Orange Pi Zero 2. It features:
-- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU
-- 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2)
-- AXP313a PMIC (more capable AXP305 on the Zero2)
-- Raspberry-Pi-1 compatible GPIO header
-- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports
-- 1 USB 2.0 host port
-- 1 USB 2.0 type C port (power supply + OTG)
-- MicroSD slot
-- on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2)
-- 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2)
-- micro-HDMI port
-- (yet) unsupported Allwinner WiFi/BT chip
-
-Add the devicetree file describing the currently supported features,
-namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable at
-the moment, though the basic functionality works.
-
-Signed-off-by: Andre Przywara <andre.przywara@arm.com>
-Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.com
-Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
----
- arch/arm64/boot/dts/allwinner/Makefile | 1 +
- .../allwinner/sun50i-h618-orangepi-zero3.dts | 94 +++++++++++++++++++
- 2 files changed, 95 insertions(+)
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
-
---- a/arch/arm64/boot/dts/allwinner/Makefile
-+++ b/arch/arm64/boot/dts/allwinner/Makefile
-@@ -40,3 +40,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-ta
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
- dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
-+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero3.dtb
---- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
-@@ -0,0 +1,94 @@
-+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
-+/*
-+ * Copyright (C) 2023 Arm Ltd.
-+ */
-+
-+/dts-v1/;
-+
-+#include "sun50i-h616-orangepi-zero.dtsi"
-+
-+/ {
-+ model = "OrangePi Zero3";
-+ compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
-+};
-+
-+&emac0 {
-+ phy-supply = <®_dldo1>;
-+};
-+
-+&ext_rgmii_phy {
-+ motorcomm,clk-out-frequency-hz = <125000000>;
-+};
-+
-+&mmc0 {
-+ /*
-+ * The schematic shows the card detect pin wired up to PF6, via an
-+ * inverter, but it just doesn't work.
-+ */
-+ broken-cd;
-+ vmmc-supply = <®_dldo1>;
-+};
-+
-+&r_i2c {
-+ status = "okay";
-+
-+ axp313: pmic@36 {
-+ compatible = "x-powers,axp313a";
-+ reg = <0x36>;
-+ #interrupt-cells = <1>;
-+ interrupt-controller;
-+ interrupt-parent = <&pio>;
-+ interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>; /* PC9 */
-+
-+ vin1-supply = <®_vcc5v>;
-+ vin2-supply = <®_vcc5v>;
-+ vin3-supply = <®_vcc5v>;
-+
-+ regulators {
-+ /* Supplies VCC-PLL, so needs to be always on. */
-+ reg_aldo1: aldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
-+ regulator-name = "vcc1v8";
-+ };
-+
-+ /* Supplies VCC-IO, so needs to be always on. */
-+ reg_dldo1: dldo1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc3v3";
-+ };
-+
-+ reg_dcdc1: dcdc1 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <810000>;
-+ regulator-max-microvolt = <990000>;
-+ regulator-name = "vdd-gpu-sys";
-+ };
-+
-+ reg_dcdc2: dcdc2 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <810000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-cpu";
-+ };
-+
-+ reg_dcdc3: dcdc3 {
-+ regulator-always-on;
-+ regulator-min-microvolt = <1100000>;
-+ regulator-max-microvolt = <1100000>;
-+ regulator-name = "vdd-dram";
-+ };
-+ };
-+ };
-+};
-+
-+&pio {
-+ vcc-pc-supply = <®_dldo1>;
-+ vcc-pf-supply = <®_dldo1>;
-+ vcc-pg-supply = <®_aldo1>;
-+ vcc-ph-supply = <®_dldo1>;
-+ vcc-pi-supply = <®_dldo1>;
-+};
+++ /dev/null
-From b9622937d95809ef89904583191571a9fa326402 Mon Sep 17 00:00:00 2001
-From: Chukun Pan <amadeus@jmu.edu.cn>
-Date: Sun, 29 Oct 2023 15:40:09 +0800
-Subject: [PATCH] arm64: dts: allwinner: h616: update emac for Orange Pi Zero 3
-
-The current emac setting is not suitable for Orange Pi Zero 3,
-move it back to Orange Pi Zero 2 DT. Also update phy mode and
-delay values for emac on Orange Pi Zero 3.
-With these changes, Ethernet now looks stable.
-
-Fixes: 322bf103204b ("arm64: dts: allwinner: h616: Split Orange Pi Zero 2 DT")
-Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
-Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
-Link: https://lore.kernel.org/r/20231029074009.7820-2-amadeus@jmu.edu.cn
-Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 3 ---
- arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 3 +++
- arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 2 ++
- 3 files changed, 5 insertions(+), 3 deletions(-)
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
-@@ -68,10 +68,7 @@
- &emac0 {
- pinctrl-names = "default";
- pinctrl-0 = <&ext_rgmii_pins>;
-- phy-mode = "rgmii";
- phy-handle = <&ext_rgmii_phy>;
-- allwinner,rx-delay-ps = <3100>;
-- allwinner,tx-delay-ps = <700>;
- status = "okay";
- };
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -13,6 +13,9 @@
- };
-
- &emac0 {
-+ allwinner,rx-delay-ps = <3100>;
-+ allwinner,tx-delay-ps = <700>;
-+ phy-mode = "rgmii";
- phy-supply = <®_dcdce>;
- };
-
---- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
-@@ -13,6 +13,8 @@
- };
-
- &emac0 {
-+ allwinner,tx-delay-ps = <700>;
-+ phy-mode = "rgmii-rxid";
- phy-supply = <®_dldo1>;
- };
-
projects / openwrt / staging / pepe2k.git / commitdiff