package/kernel/mac80211/patches/319-v4.12-0053-brcmfmac-fix-alignment-configuration-on-host-using-6.patch

   1 From 1dbf647f31751a4e94fa0435c34f0f5ad5ce0adc Mon Sep 17 00:00:00 2001
   2 From: Arend Van Spriel <arend.vanspriel@broadcom.com>
   3 Date: Fri, 26 May 2017 13:02:55 +0200
   4 Subject: [PATCH] brcmfmac: fix alignment configuration on host using 64-bit
   5  DMA
   6
   7 For SDIO the alignment requirement for transfers from device to host
   8 is configured in firmware. This configuration is limited to minimum
   9 of 4-byte alignment. However, this is not correct for platforms using
  10 64-bit DMA when the minimum alignment should be 8 bytes. This issue
  11 appeared when the ALIGNMENT definition was set according the DMA
  12 configuration. The configuration in firmware was not using that macro
  13 defintion, but a hardcoded value of 4. Hence the driver reported
  14 alignment failures for data coming from the device and causing
  15 transfers to fail.
  16
  17 Fixes: 6e84ab604bde ("brcmfmac: properly align buffers on certain platforms
  18 Reported-by: Hans de Goede <hdegoede@redhat.com>
  19 Tested-by: Hans de Goede <hdegoede@redhat.com>
  20 Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
  21 Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
  22 Reviewed-by: Franky Lin <franky.lin@broadcom.com>
  23 Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
  24 Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  25 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  26 ---
  27  drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 2 +-
  28  1 file changed, 1 insertion(+), 1 deletion(-)
  29
  30 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
  31 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
  32 @@ -3420,7 +3420,7 @@ static int brcmf_sdio_bus_preinit(struct
  33                 /* otherwise, set txglomalign */
  34                 value = sdiodev->settings->bus.sdio.sd_sgentry_align;
  35                 /* SDIO ADMA requires at least 32 bit alignment */
  36 -               value = max_t(u32, value, 4);
  37 +               value = max_t(u32, value, ALIGNMENT);
  38                 err = brcmf_iovar_data_set(dev, "bus:txglomalign", &value,
  39                                            sizeof(u32));
  40         }