package/kernel/linux/modules/can.mk

   1 #
   2 # Copyright (C) 2013 OpenWrt.org
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 CAN_MENU:=CAN Support
   9
  10 define KernelPackage/can
  11   SUBMENU:=$(CAN_MENU)
  12   TITLE:=CAN bus support
  13   KCONFIG:=\
  14         CONFIG_CAN=m \
  15         CONFIG_CAN_DEV \
  16         CONFIG_CAN_NETLINK=y \
  17         CONFIG_CAN_CALC_BITTIMING=y \
  18         CONFIG_CAN_LEDS=y \
  19         CONFIG_CAN_AT91=n \
  20         CONFIG_CAN_TI_HECC=n \
  21         CONFIG_CAN_MCP251X=n \
  22         CONFIG_CAN_BFIN=n \
  23         CONFIG_CAN_JANZ_ICAN3=n \
  24         CONFIG_PCH_CAN=n \
  25         CONFIG_CAN_GRCAN=n \
  26         CONFIG_CAN_CC770=n \
  27         CONFIG_CAN_MSCAN=n \
  28         CONFIG_CAN_SJA1000=n \
  29         CONFIG_CAN_SOFTING=n \
  30         CONFIG_NET_EMATCH_CANID=n \
  31         CONFIG_CAN_DEBUG_DEVICES=n
  32   FILES:=$(LINUX_DIR)/drivers/net/can/dev/can-dev.ko \
  33          $(LINUX_DIR)/net/can/can.ko
  34   AUTOLOAD:=$(call AutoProbe,can can-dev)
  35 endef
  36
  37 define KernelPackage/can/description
  38  Kernel module for CAN bus support.
  39 endef
  40
  41 $(eval $(call KernelPackage,can))
  42
  43
  44 define AddDepends/can
  45   SUBMENU:=$(CAN_MENU)
  46   DEPENDS+=kmod-can $(1)
  47 endef
  48
  49
  50 define KernelPackage/can-bcm
  51   TITLE:=Broadcast Manager CAN Protcol
  52   KCONFIG:=CONFIG_CAN_BCM
  53   FILES:=$(LINUX_DIR)/net/can/can-bcm.ko
  54   AUTOLOAD:=$(call AutoProbe,can-bcm)
  55   $(call AddDepends/can)
  56 endef
  57
  58 define KernelPackage/can-bcm/description
  59  The Broadcast Manager offers content filtering, timeout monitoring,
  60  sending of RTR frames, and cyclic CAN messages without permanent user
  61  interaction.
  62 endef
  63
  64 $(eval $(call KernelPackage,can-bcm))
  65
  66
  67 define KernelPackage/can-c-can
  68   TITLE:=BOSCH C_CAN/D_CAN drivers
  69   KCONFIG:=CONFIG_CAN_C_CAN
  70   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can.ko
  71   AUTOLOAD:=$(call AutoProbe,c_can)
  72   $(call AddDepends/can)
  73 endef
  74
  75 define KernelPackage/can-c-can/description
  76  This driver adds generic support for the C_CAN/D_CAN chips.
  77 endef
  78
  79 $(eval $(call KernelPackage,can-c-can))
  80
  81
  82 define KernelPackage/can-c-can-pci
  83   TITLE:=PCI Bus based BOSCH C_CAN/D_CAN driver
  84   KCONFIG:=CONFIG_CAN_C_CAN_PCI
  85   DEPENDS:=kmod-can-c-can @PCI_SUPPORT
  86   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_pci.ko
  87   AUTOLOAD:=$(call AutoProbe,c_can_pci)
  88   $(call AddDepends/can)
  89 endef
  90
  91 define KernelPackage/can-c-can-pci/description
  92  This driver adds support for the C_CAN/D_CAN chips connected
  93  to the PCI bus.
  94 endef
  95
  96 $(eval $(call KernelPackage,can-c-can-pci))
  97
  98
  99 define KernelPackage/can-c-can-platform
 100   TITLE:=Platform Bus based BOSCH C_CAN/D_CAN driver
 101   KCONFIG:=CONFIG_CAN_C_CAN_PLATFORM
 102   DEPENDS:=kmod-can-c-can +kmod-regmap-core
 103   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_platform.ko
 104   AUTOLOAD:=$(call AutoProbe,c_can_platform)
 105   $(call AddDepends/can)
 106 endef
 107
 108 define KernelPackage/can-c-can-platform/description
 109  This driver adds support for the C_CAN/D_CAN chips connected
 110  to the "platform bus" (Linux abstraction for directly to the
 111  processor attached devices) which can be found on various
 112  boards from ST Microelectronics (http://www.st.com) like the
 113  SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
 114  boards like am335x, dm814x, dm813x and dm811x.
 115 endef
 116
 117 $(eval $(call KernelPackage,can-c-can-platform))
 118
 119
 120 define KernelPackage/can-flexcan
 121   TITLE:=Support for Freescale FLEXCAN based chips
 122   KCONFIG:=CONFIG_CAN_FLEXCAN
 123   FILES:= \
 124         $(LINUX_DIR)/drivers/net/can/flexcan.ko@lt5.17 \
 125         $(LINUX_DIR)/drivers/net/can/flexcan/flexcan.ko@ge5.17
 126   AUTOLOAD:=$(call AutoProbe,flexcan)
 127   $(call AddDepends/can,@TARGET_imx)
 128 endef
 129
 130 define KernelPackage/can-flexcan/description
 131  Freescale FLEXCAN CAN bus controller implementation.
 132 endef
 133
 134 $(eval $(call KernelPackage,can-flexcan))
 135
 136
 137 define KernelPackage/can-gw
 138   TITLE:=CAN Gateway/Router
 139   KCONFIG:=CONFIG_CAN_GW
 140   FILES:=$(LINUX_DIR)/net/can/can-gw.ko
 141   AUTOLOAD:=$(call AutoProbe,can-gw)
 142   $(call AddDepends/can)
 143 endef
 144
 145 define KernelPackage/can-gw/description
 146  The CAN Gateway/Router is used to route (and modify) CAN frames.
 147 endef
 148
 149 $(eval $(call KernelPackage,can-gw))
 150
 151
 152 define KernelPackage/can-mcp251x
 153   TITLE:=MCP251x SPI CAN controller
 154   KCONFIG:=\
 155         CONFIG_SPI=y \
 156         CONFIG_CAN_MCP251X
 157   FILES:=$(LINUX_DIR)/drivers/net/can/spi/mcp251x.ko
 158   AUTOLOAD:=$(call AutoProbe,mcp251x)
 159   $(call AddDepends/can)
 160 endef
 161
 162 define KernelPackage/can-mcp251x/description
 163  Microchip MCP251x SPI CAN controller
 164 endef
 165
 166 $(eval $(call KernelPackage,can-mcp251x))
 167
 168
 169 define KernelPackage/can-raw
 170   TITLE:=Raw CAN Protcol
 171   KCONFIG:=CONFIG_CAN_RAW
 172   FILES:=$(LINUX_DIR)/net/can/can-raw.ko
 173   AUTOLOAD:=$(call AutoProbe,can-raw)
 174   $(call AddDepends/can)
 175 endef
 176
 177 define KernelPackage/can-raw/description
 178  The raw CAN protocol option offers access to the CAN bus via
 179  the BSD  socket API.
 180 endef
 181
 182 $(eval $(call KernelPackage,can-raw))
 183
 184
 185 define KernelPackage/can-slcan
 186   TITLE:=Serial / USB serial CAN Adaptors (slcan)
 187   KCONFIG:=CONFIG_CAN_SLCAN
 188   FILES:= \
 189         $(LINUX_DIR)/drivers/net/can/slcan.ko@lt6.0 \
 190         $(LINUX_DIR)/drivers/net/can/slcan/slcan.ko@ge6.0
 191   AUTOLOAD:=$(call AutoProbe,slcan)
 192   $(call AddDepends/can)
 193 endef
 194
 195 define KernelPackage/can-slcan/description
 196  CAN driver for several 'low cost' CAN interfaces that are attached
 197  via serial lines or via USB-to-serial adapters using the LAWICEL
 198  ASCII protocol.
 199 endef
 200
 201 $(eval $(call KernelPackage,can-slcan))
 202
 203
 204 define KernelPackage/can-usb-8dev
 205   TITLE:=8 devices USB2CAN interface
 206   KCONFIG:=CONFIG_CAN_8DEV_USB
 207   FILES:=$(LINUX_DIR)/drivers/net/can/usb/usb_8dev.ko
 208   AUTOLOAD:=$(call AutoProbe,usb_8dev)
 209   $(call AddDepends/can,+kmod-usb-core)
 210 endef
 211
 212 define KernelPackage/can-usb-8dev/description
 213  This driver supports the USB2CAN interface
 214  from 8 devices (http://www.8devices.com).
 215 endef
 216
 217 $(eval $(call KernelPackage,can-usb-8dev))
 218
 219
 220 define KernelPackage/can-usb-ems
 221   TITLE:=EMS CPC-USB/ARM7 CAN/USB interface
 222   KCONFIG:=CONFIG_CAN_EMS_USB
 223   FILES:=$(LINUX_DIR)/drivers/net/can/usb/ems_usb.ko
 224   AUTOLOAD:=$(call AutoProbe,ems_usb)
 225   $(call AddDepends/can,+kmod-usb-core)
 226 endef
 227
 228 define KernelPackage/can-usb-ems/description
 229  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
 230  from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 231 endef
 232
 233 $(eval $(call KernelPackage,can-usb-ems))
 234
 235
 236 define KernelPackage/can-usb-esd
 237   TITLE:=ESD USB/2 CAN/USB interface
 238   KCONFIG:=CONFIG_CAN_ESD_USB2
 239   FILES:=$(LINUX_DIR)/drivers/net/can/usb/esd_usb2.ko
 240   AUTOLOAD:=$(call AutoProbe,esd_usb2)
 241   $(call AddDepends/can,+kmod-usb-core)
 242 endef
 243
 244 define KernelPackage/can-usb-esd/description
 245  This driver supports the CAN-USB/2 interface
 246  from esd electronic system design gmbh (http://www.esd.eu).
 247 endef
 248
 249 $(eval $(call KernelPackage,can-usb-esd))
 250
 251
 252 define KernelPackage/can-usb-kvaser
 253   TITLE:=Kvaser CAN/USB interface
 254   KCONFIG:=CONFIG_CAN_KVASER_USB
 255   FILES:= \
 256         $(LINUX_DIR)/drivers/net/can/usb/kvaser_usb/kvaser_usb.ko
 257   AUTOLOAD:=$(call AutoProbe,kvaser_usb)
 258   $(call AddDepends/can,+kmod-usb-core)
 259 endef
 260
 261 define KernelPackage/can-usb-kvaser/description
 262  This driver adds support for Kvaser CAN/USB devices like Kvaser
 263  Leaf Light.
 264 endef
 265
 266 $(eval $(call KernelPackage,can-usb-kvaser))
 267
 268
 269 define KernelPackage/can-usb-peak
 270   TITLE:=PEAK PCAN-USB/USB Pro interfaces
 271   KCONFIG:=CONFIG_CAN_PEAK_USB
 272   FILES:=$(LINUX_DIR)/drivers/net/can/usb/peak_usb/peak_usb.ko
 273   AUTOLOAD:=$(call AutoProbe,peak_usb)
 274   $(call AddDepends/can,+kmod-usb-core)
 275 endef
 276
 277 define KernelPackage/can-usb-peak/description
 278  This driver supports the PCAN-USB and PCAN-USB Pro adapters
 279  from PEAK-System Technik (http://www.peak-system.com).
 280 endef
 281
 282 $(eval $(call KernelPackage,can-usb-peak))
 283
 284
 285 define KernelPackage/can-vcan
 286   TITLE:=Virtual Local CAN Interface (vcan)
 287   KCONFIG:=CONFIG_CAN_VCAN
 288   FILES:=$(LINUX_DIR)/drivers/net/can/vcan.ko
 289   AUTOLOAD:=$(call AutoProbe,vcan)
 290   $(call AddDepends/can)
 291 endef
 292
 293 define KernelPackage/can-vcan/description
 294  Similar to the network loopback devices, vcan offers a
 295  virtual local CAN interface.
 296 endef
 297
 298 $(eval $(call KernelPackage,can-vcan))
 299
 300 define KernelPackage/can-xilinx-can
 301   TITLE:=Xilinx CAN IP
 302   KCONFIG:=CONFIG_CAN_XILINXCAN
 303   FILES:=$(LINUX_DIR)/drivers/net/can/xilinx_can.ko
 304   AUTOLOAD:=$(call AutoProbe,xilinx_can)
 305   $(call AddDepends/can,@TARGET_zynq)
 306 endef
 307
 308 define KernelPackage/can-xilinx-can/description
 309  Xilinx CAN driver. This driver supports both
 310  soft AXI CAN IP and Zynq CANPS IP.
 311 endef
 312
 313 $(eval $(call KernelPackage,can-xilinx-can))