rockchip: move r8152 related patches to generic
authorChukun Pan <amadeus@jmu.edu.cn>
Fri, 15 Oct 2021 14:04:00 +0000 (22:04 +0800)
committerHauke Mehrtens <hauke@hauke-m.de>
Sat, 30 Oct 2021 19:17:20 +0000 (21:17 +0200)
These patches can be used on other platforms, so
move it to generic.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch [new file with mode: 0644]
target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch [new file with mode: 0644]
target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch [new file with mode: 0644]
target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch [new file with mode: 0644]
target/linux/rockchip/patches-5.10/002-net-usb-r8152-add-LED-configuration-from-OF.patch [deleted file]
target/linux/rockchip/patches-5.10/003-dt-bindings-net-add-RTL8152-binding-documentation.patch [deleted file]
target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch [deleted file]
target/linux/rockchip/patches-5.4/003-dt-bindings-net-add-RTL8152-binding-documentation.patch [deleted file]

diff --git a/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-5.10/760-net-usb-r8152-add-LED-configuration-from-OF.patch
new file mode 100644 (file)
index 0000000..f94d16c
--- /dev/null
@@ -0,0 +1,74 @@
+From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sun, 26 Jul 2020 02:38:31 +0200
+Subject: [PATCH] net: usb: r8152: add LED configuration from OF
+
+This adds the ability to configure the LED configuration register using
+OF. This way, the correct value for board specific LED configuration can
+be determined.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
+ 1 file changed, 23 insertions(+)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -11,6 +11,7 @@
+ #include <linux/mii.h>
+ #include <linux/ethtool.h>
+ #include <linux/usb.h>
++#include <linux/of.h>
+ #include <linux/crc32.h>
+ #include <linux/if_vlan.h>
+ #include <linux/uaccess.h>
+@@ -5301,6 +5302,22 @@ static void rtl_tally_reset(struct r8152
+       ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
+ }
++static int r8152_led_configuration(struct r8152 *tp)
++{
++      u32 led_data;
++      int ret;
++
++      ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
++                                                              &led_data);
++
++      if (ret)
++              return ret;
++      
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
++
++      return 0;
++}
++
+ static void r8152b_init(struct r8152 *tp)
+ {
+       u32 ocp_data;
+@@ -5342,6 +5359,8 @@ static void r8152b_init(struct r8152 *tp
+       ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+       ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+       ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++
++      r8152_led_configuration(tp);
+ }
+ static void r8153_init(struct r8152 *tp)
+@@ -5487,6 +5506,8 @@ static void r8153_init(struct r8152 *tp)
+               tp->coalesce = COALESCE_SLOW;
+               break;
+       }
++
++      r8152_led_configuration(tp);
+ }
+ static void r8153b_init(struct r8152 *tp)
+@@ -5573,6 +5594,8 @@ static void r8153b_init(struct r8152 *tp
+       rtl_tally_reset(tp);
+       tp->coalesce = 15000;   /* 15 us */
++
++      r8152_led_configuration(tp);
+ }
+ static int rtl8152_pre_reset(struct usb_interface *intf)
diff --git a/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-5.10/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
new file mode 100644 (file)
index 0000000..be262b9
--- /dev/null
@@ -0,0 +1,54 @@
+From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sun, 26 Jul 2020 15:30:33 +0200
+Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
+
+Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
+adapters.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ .../bindings/net/realtek,rtl8152.yaml         | 36 +++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
+@@ -0,0 +1,36 @@
++# SPDX-License-Identifier: GPL-2.0
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Realtek RTL8152/RTL8153 series USB ethernet
++
++maintainers:
++  - David Bauer <mail@david-bauer.net>
++
++properties:
++  compatible:
++    oneOf:
++      - items:
++          - enum:
++              - realtek,rtl8152
++              - realtek,rtl8153
++
++  reg:
++    description: The device number on the USB bus
++
++  realtek,led-data:
++    description: Value to be written to the LED configuration register.
++
++required:
++  - compatible
++  - reg
++
++examples:
++  - |
++    usb-eth@2 {
++      compatible = "realtek,rtl8153";
++      reg = <2>;
++      realtek,led-data = <0x87>;
++    };
+\ No newline at end of file
diff --git a/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/generic/hack-5.4/760-net-usb-r8152-add-LED-configuration-from-OF.patch
new file mode 100644 (file)
index 0000000..a96661c
--- /dev/null
@@ -0,0 +1,74 @@
+From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sun, 26 Jul 2020 02:38:31 +0200
+Subject: [PATCH] net: usb: r8152: add LED configuration from OF
+
+This adds the ability to configure the LED configuration register using
+OF. This way, the correct value for board specific LED configuration can
+be determined.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
+ 1 file changed, 23 insertions(+)
+
+--- a/drivers/net/usb/r8152.c
++++ b/drivers/net/usb/r8152.c
+@@ -11,6 +11,7 @@
+ #include <linux/mii.h>
+ #include <linux/ethtool.h>
+ #include <linux/usb.h>
++#include <linux/of.h>
+ #include <linux/crc32.h>
+ #include <linux/if_vlan.h>
+ #include <linux/uaccess.h>
+@@ -4336,6 +4337,22 @@ static void rtl_tally_reset(struct r8152
+       ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
+ }
++static int r8152_led_configuration(struct r8152 *tp)
++{
++      u32 led_data;
++      int ret;
++
++      ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
++                                                              &led_data);
++
++      if (ret)
++              return ret;
++      
++      ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
++
++      return 0;
++}
++
+ static void r8152b_init(struct r8152 *tp)
+ {
+       u32 ocp_data;
+@@ -4377,6 +4394,8 @@ static void r8152b_init(struct r8152 *tp
+       ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+       ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+       ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
++
++      r8152_led_configuration(tp);
+ }
+ static void r8153_init(struct r8152 *tp)
+@@ -4511,6 +4530,8 @@ static void r8153_init(struct r8152 *tp)
+               tp->coalesce = COALESCE_SLOW;
+               break;
+       }
++
++      r8152_led_configuration(tp);
+ }
+ static void r8153b_init(struct r8152 *tp)
+@@ -4587,6 +4608,8 @@ static void r8153b_init(struct r8152 *tp
+       rtl_tally_reset(tp);
+       tp->coalesce = 15000;   /* 15 us */
++
++      r8152_led_configuration(tp);
+ }
+ static int rtl8152_pre_reset(struct usb_interface *intf)
diff --git a/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/generic/hack-5.4/761-dt-bindings-net-add-RTL8152-binding-documentation.patch
new file mode 100644 (file)
index 0000000..be262b9
--- /dev/null
@@ -0,0 +1,54 @@
+From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
+From: David Bauer <mail@david-bauer.net>
+Date: Sun, 26 Jul 2020 15:30:33 +0200
+Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
+
+Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
+adapters.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+---
+ .../bindings/net/realtek,rtl8152.yaml         | 36 +++++++++++++++++++
+ 1 file changed, 36 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
+
+--- /dev/null
++++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
+@@ -0,0 +1,36 @@
++# SPDX-License-Identifier: GPL-2.0
++%YAML 1.2
++---
++$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
++$schema: http://devicetree.org/meta-schemas/core.yaml#
++
++title: Realtek RTL8152/RTL8153 series USB ethernet
++
++maintainers:
++  - David Bauer <mail@david-bauer.net>
++
++properties:
++  compatible:
++    oneOf:
++      - items:
++          - enum:
++              - realtek,rtl8152
++              - realtek,rtl8153
++
++  reg:
++    description: The device number on the USB bus
++
++  realtek,led-data:
++    description: Value to be written to the LED configuration register.
++
++required:
++  - compatible
++  - reg
++
++examples:
++  - |
++    usb-eth@2 {
++      compatible = "realtek,rtl8153";
++      reg = <2>;
++      realtek,led-data = <0x87>;
++    };
+\ No newline at end of file
diff --git a/target/linux/rockchip/patches-5.10/002-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/rockchip/patches-5.10/002-net-usb-r8152-add-LED-configuration-from-OF.patch
deleted file mode 100644 (file)
index f94d16c..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 02:38:31 +0200
-Subject: [PATCH] net: usb: r8152: add LED configuration from OF
-
-This adds the ability to configure the LED configuration register using
-OF. This way, the correct value for board specific LED configuration can
-be determined.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -11,6 +11,7 @@
- #include <linux/mii.h>
- #include <linux/ethtool.h>
- #include <linux/usb.h>
-+#include <linux/of.h>
- #include <linux/crc32.h>
- #include <linux/if_vlan.h>
- #include <linux/uaccess.h>
-@@ -5301,6 +5302,22 @@ static void rtl_tally_reset(struct r8152
-       ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
- }
-+static int r8152_led_configuration(struct r8152 *tp)
-+{
-+      u32 led_data;
-+      int ret;
-+
-+      ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
-+                                                              &led_data);
-+
-+      if (ret)
-+              return ret;
-+      
-+      ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
-+
-+      return 0;
-+}
-+
- static void r8152b_init(struct r8152 *tp)
- {
-       u32 ocp_data;
-@@ -5342,6 +5359,8 @@ static void r8152b_init(struct r8152 *tp
-       ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-       ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-       ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+      r8152_led_configuration(tp);
- }
- static void r8153_init(struct r8152 *tp)
-@@ -5487,6 +5506,8 @@ static void r8153_init(struct r8152 *tp)
-               tp->coalesce = COALESCE_SLOW;
-               break;
-       }
-+
-+      r8152_led_configuration(tp);
- }
- static void r8153b_init(struct r8152 *tp)
-@@ -5573,6 +5594,8 @@ static void r8153b_init(struct r8152 *tp
-       rtl_tally_reset(tp);
-       tp->coalesce = 15000;   /* 15 us */
-+
-+      r8152_led_configuration(tp);
- }
- static int rtl8152_pre_reset(struct usb_interface *intf)
diff --git a/target/linux/rockchip/patches-5.10/003-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/rockchip/patches-5.10/003-dt-bindings-net-add-RTL8152-binding-documentation.patch
deleted file mode 100644 (file)
index be262b9..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 15:30:33 +0200
-Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
-
-Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
-adapters.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../bindings/net/realtek,rtl8152.yaml         | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-@@ -0,0 +1,36 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL8152/RTL8153 series USB ethernet
-+
-+maintainers:
-+  - David Bauer <mail@david-bauer.net>
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - items:
-+          - enum:
-+              - realtek,rtl8152
-+              - realtek,rtl8153
-+
-+  reg:
-+    description: The device number on the USB bus
-+
-+  realtek,led-data:
-+    description: Value to be written to the LED configuration register.
-+
-+required:
-+  - compatible
-+  - reg
-+
-+examples:
-+  - |
-+    usb-eth@2 {
-+      compatible = "realtek,rtl8153";
-+      reg = <2>;
-+      realtek,led-data = <0x87>;
-+    };
-\ No newline at end of file
diff --git a/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch b/target/linux/rockchip/patches-5.4/002-net-usb-r8152-add-LED-configuration-from-OF.patch
deleted file mode 100644 (file)
index a96661c..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 02:38:31 +0200
-Subject: [PATCH] net: usb: r8152: add LED configuration from OF
-
-This adds the ability to configure the LED configuration register using
-OF. This way, the correct value for board specific LED configuration can
-be determined.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/net/usb/r8152.c
-+++ b/drivers/net/usb/r8152.c
-@@ -11,6 +11,7 @@
- #include <linux/mii.h>
- #include <linux/ethtool.h>
- #include <linux/usb.h>
-+#include <linux/of.h>
- #include <linux/crc32.h>
- #include <linux/if_vlan.h>
- #include <linux/uaccess.h>
-@@ -4336,6 +4337,22 @@ static void rtl_tally_reset(struct r8152
-       ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
- }
-+static int r8152_led_configuration(struct r8152 *tp)
-+{
-+      u32 led_data;
-+      int ret;
-+
-+      ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
-+                                                              &led_data);
-+
-+      if (ret)
-+              return ret;
-+      
-+      ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
-+
-+      return 0;
-+}
-+
- static void r8152b_init(struct r8152 *tp)
- {
-       u32 ocp_data;
-@@ -4377,6 +4394,8 @@ static void r8152b_init(struct r8152 *tp
-       ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
-       ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
-       ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
-+
-+      r8152_led_configuration(tp);
- }
- static void r8153_init(struct r8152 *tp)
-@@ -4511,6 +4530,8 @@ static void r8153_init(struct r8152 *tp)
-               tp->coalesce = COALESCE_SLOW;
-               break;
-       }
-+
-+      r8152_led_configuration(tp);
- }
- static void r8153b_init(struct r8152 *tp)
-@@ -4587,6 +4608,8 @@ static void r8153b_init(struct r8152 *tp
-       rtl_tally_reset(tp);
-       tp->coalesce = 15000;   /* 15 us */
-+
-+      r8152_led_configuration(tp);
- }
- static int rtl8152_pre_reset(struct usb_interface *intf)
diff --git a/target/linux/rockchip/patches-5.4/003-dt-bindings-net-add-RTL8152-binding-documentation.patch b/target/linux/rockchip/patches-5.4/003-dt-bindings-net-add-RTL8152-binding-documentation.patch
deleted file mode 100644 (file)
index be262b9..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
-From 3ee05f4aa64fc86af3be5bc176ba5808de9260a7 Mon Sep 17 00:00:00 2001
-From: David Bauer <mail@david-bauer.net>
-Date: Sun, 26 Jul 2020 15:30:33 +0200
-Subject: [PATCH] dt-bindings: net: add RTL8152 binding documentation
-
-Add binding documentation for the Realtek RTL8152 / RTL8153 USB ethernet
-adapters.
-
-Signed-off-by: David Bauer <mail@david-bauer.net>
----
- .../bindings/net/realtek,rtl8152.yaml         | 36 +++++++++++++++++++
- 1 file changed, 36 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/net/realtek,rtl8152.yaml
-@@ -0,0 +1,36 @@
-+# SPDX-License-Identifier: GPL-2.0
-+%YAML 1.2
-+---
-+$id: http://devicetree.org/schemas/net/realtek,rtl8152.yaml#
-+$schema: http://devicetree.org/meta-schemas/core.yaml#
-+
-+title: Realtek RTL8152/RTL8153 series USB ethernet
-+
-+maintainers:
-+  - David Bauer <mail@david-bauer.net>
-+
-+properties:
-+  compatible:
-+    oneOf:
-+      - items:
-+          - enum:
-+              - realtek,rtl8152
-+              - realtek,rtl8153
-+
-+  reg:
-+    description: The device number on the USB bus
-+
-+  realtek,led-data:
-+    description: Value to be written to the LED configuration register.
-+
-+required:
-+  - compatible
-+  - reg
-+
-+examples:
-+  - |
-+    usb-eth@2 {
-+      compatible = "realtek,rtl8153";
-+      reg = <2>;
-+      realtek,led-data = <0x87>;
-+    };
-\ No newline at end of file