ipq806x: remove leftover files for linux 4.4
authorFelix Fietkau <nbd@nbd.name>
Mon, 11 Dec 2017 08:55:04 +0000 (09:55 +0100)
committerFelix Fietkau <nbd@nbd.name>
Tue, 12 Dec 2017 11:46:04 +0000 (12:46 +0100)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi [deleted file]
target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065.dtsi [deleted file]

diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
deleted file mode 100644 (file)
index 7eeaab1..0000000
+++ /dev/null
@@ -1,501 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "TP-Link Archer C2600";
-       compatible = "tplink,c2600", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &power;
-               led-failsafe = &general;
-               led-running = &power;
-               led-upgrade = &general;
-       };
-
-       chosen {
-               linux,stdout-path = "serial0:115200n8";
-       };
-
-       soc {
-               pinmux@800000 {
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio16", "gpio54", "gpio65";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       led_pins: led_pins {
-                               mux {
-                                       pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
-                                              "gpio53", "gpio66";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       spi_pins: spi_pins {
-                               mux {
-                                       pins = "gpio18", "gpio19", "gpio21";
-                                       function = "gsbi5";
-                                       bias-pull-down;
-                               };
-
-                               data {
-                                       pins = "gpio18", "gpio19";
-                                       drive-strength = <10>;
-                               };
-
-                               cs {
-                                       pins = "gpio20";
-                                       function = "gpio";
-                                       drive-strength = <10>;
-                                       bias-pull-up;
-                               };
-
-                               clk {
-                                       pins = "gpio21";
-                                       drive-strength = <12>;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       usb0_pwr_en_pin: usb0_pwr_en_pin {
-                               mux {
-                                       pins = "gpio25";
-                                       function = "gpio";
-                                       drive-strength = <10>;
-                                       bias-pull-up;
-                                       output-high;
-                               };
-                       };
-
-                       usb1_pwr_en_pin: usb1_pwr_en_pin {
-                               mux {
-                                       pins = "gpio23";
-                                       function = "gpio";
-                                       drive-strength = <10>;
-                                       bias-pull-up;
-                                       output-high;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               gsbi5: gsbi@1a200000 {
-                       qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
-
-                       spi5: spi@1a280000 {
-                               status = "ok";
-
-                               pinctrl-0 = <&spi_pins>;
-                               pinctrl-names = "default";
-
-                               cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-                               flash: m25p80@0 {
-                                       compatible = "jedec,spi-nor";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-                                       spi-max-frequency = <50000000>;
-                                       reg = <0>;
-
-                                       SBL1@0 {
-                                               label = "SBL1";
-                                               reg = <0x0 0x20000>;
-                                               read-only;
-                                       };
-
-                                       MIBIB@20000 {
-                                               label = "MIBIB";
-                                               reg = <0x20000 0x20000>;
-                                               read-only;
-                                       };
-
-                                       SBL2@40000 {
-                                               label = "SBL2";
-                                               reg = <0x40000 0x20000>;
-                                               read-only;
-                                       };
-
-                                       SBL3@60000 {
-                                               label = "SBL3";
-                                               reg = <0x60000 0x30000>;
-                                               read-only;
-                                       };
-
-                                       DDRCONFIG@90000 {
-                                               label = "DDRCONFIG";
-                                               reg = <0x90000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       SSD@a0000 {
-                                               label = "SSD";
-                                               reg = <0xa0000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       TZ@b0000 {
-                                               label = "TZ";
-                                               reg = <0xb0000 0x30000>;
-                                               read-only;
-                                       };
-
-                                       RPM@e0000 {
-                                               label = "RPM";
-                                               reg = <0xe0000 0x20000>;
-                                               read-only;
-                                       };
-
-                                       fs-uboot@100000 {
-                                               label = "fs-uboot";
-                                               reg = <0x100000 0x70000>;
-                                               read-only;
-                                       };
-
-                                       uboot-env@170000 {
-                                               label = "uboot-env";
-                                               reg = <0x170000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       radio@1b0000 {
-                                               label = "radio";
-                                               reg = <0x1b0000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       os-image@1f0000 {
-                                               label = "os-image";
-                                               reg = <0x1f0000 0x200000>;
-                                       };
-
-                                       rootfs@3f0000 {
-                                               label = "rootfs";
-                                               reg = <0x3f0000 0x1b00000>;
-                                       };
-
-                                       defaultmac: default-mac@1ef0000 {
-                                               label = "default-mac";
-                                               reg = <0x1ef0000 0x00200>;
-                                               read-only;
-                                       };
-
-                                       pin@1ef0200 {
-                                               label = "pin";
-                                               reg = <0x1ef0200 0x00200>;
-                                               read-only;
-                                       };
-
-                                       product-info@1ef0400 {
-                                               label = "product-info";
-                                               reg = <0x1ef0400 0x0fc00>;
-                                               read-only;
-                                       };
-
-                                       partition-table@1f00000 {
-                                               label = "partition-table";
-                                               reg = <0x1f00000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       soft-version@1f10000 {
-                                               label = "soft-version";
-                                               reg = <0x1f10000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       support-list@1f20000 {
-                                               label = "support-list";
-                                               reg = <0x1f20000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       profile@1f30000 {
-                                               label = "profile";
-                                               reg = <0x1f30000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       default-config@1f40000 {
-                                               label = "default-config";
-                                               reg = <0x1f40000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       user-config@1f50000 {
-                                               label = "user-config";
-                                               reg = <0x1f50000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       qos-db@1f90000 {
-                                               label = "qos-db";
-                                               reg = <0x1f90000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       usb-config@1fd0000 {
-                                               label = "usb-config";
-                                               reg = <0x1fd0000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       log@1fe0000 {
-                                               label = "log";
-                                               reg = <0x1fe0000 0x20000>;
-                                               read-only;
-                                       };
-                               };
-                       };
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb0_pwr_en_pin>;
-                       pinctrl-names = "default";
-               };
-
-               usb30@1 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb1_pwr_en_pin>;
-                       pinctrl-names = "default";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       qcom,id = <1>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-
-                       mtd-mac-address = <&defaultmac 0x8>;
-                       mtd-mac-address-increment = <1>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-
-                       mtd-mac-address = <&defaultmac 0x8>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               ledswitch {
-                       label = "ledswitch";
-                       gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_LIGHTS_TOGGLE>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               lan {
-                       label = "c2600:white:lan";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb4 {
-                       label = "c2600:white:usb_4";
-                       gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb2 {
-                       label = "c2600:white:usb_2";
-                       gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               wps {
-                       label = "c2600:white:wps";
-                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan_amber {
-                       label = "c2600:amber:wan";
-                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
-               };
-
-               wan_white {
-                       label = "c2600:white:wan";
-                       gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
-               };
-
-               power: power {
-                       label = "c2600:white:power";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               general: general {
-                       label = "c2600:white:general";
-                       gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&adm_dma {
-       status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
deleted file mode 100644 (file)
index a8a6139..0000000
+++ /dev/null
@@ -1,406 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear Nighthawk X4 D7800";
-       compatible = "netgear,d7800", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0xe000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &power_white;
-               led-failsafe = &power_amber;
-               led-running = &power_white;
-               led-upgrade = &power_amber;
-       };
-
-       chosen {
-               bootargs = "rootfstype=squashfs noinitrd";
-               linux,stdout-path = "serial0:115200n8";
-       };
-
-       soc {
-               pinmux@800000 {
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio6", "gpio54", "gpio65";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       led_pins: led_pins {
-                               mux {
-                                       pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-                                               "gpio24","gpio26", "gpio53", "gpio64";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       nand_pins: nand_pins {
-                               mux {
-                                       pins = "gpio34", "gpio35", "gpio36",
-                                              "gpio37", "gpio38", "gpio39",
-                                              "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       function = "nand";
-                                       drive-strength = <10>;
-                                       bias-disable;
-                               };
-                               pullups {
-                                       pins = "gpio39";
-                                       bias-pull-up;
-                               };
-                               hold {
-                                       pins = "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       bias-bus-hold;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       usb0_pwr_en_pins: usb0_pwr_en_pins {
-                               mux {
-                                       pins = "gpio15";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                                       bias-pull-down;
-                                       output-high;
-                               };
-                       };
-
-                       usb1_pwr_en_pins: usb1_pwr_en_pins {
-                               mux {
-                                       pins = "gpio16", "gpio68";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                                       bias-pull-down;
-                                       output-high;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               sata-phy@1b400000 {
-                       status = "ok";
-               };
-
-               sata@29000000 {
-                       status = "ok";
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb0_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               usb30@1 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb1_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-                       reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&pcie0_pins>;
-                       pinctrl-names = "default";
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-                       reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&pcie1_pins>;
-                       pinctrl-names = "default";
-               };
-
-               nand@1ac00000 {
-                       status = "ok";
-
-                       pinctrl-0 = <&nand_pins>;
-                       pinctrl-names = "default";
-
-                       nand-ecc-strength = <4>;
-                       nand-bus-width = <8>;
-
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       qcadata@0 {
-                               label = "qcadata";
-                               reg = <0x0000000 0x0c80000>;
-                               read-only;
-                       };
-
-                       APPSBL@c80000 {
-                               label = "APPSBL";
-                               reg = <0x0c80000 0x0500000>;
-                               read-only;
-                       };
-
-                       APPSBLENV@1180000 {
-                               label = "APPSBLENV";
-                               reg = <0x1180000 0x0080000>;
-                               read-only;
-                       };
-
-                       art: art@1200000 {
-                               label = "art";
-                               reg = <0x1200000 0x0140000>;
-                               read-only;
-                       };
-
-                       artbak: art@1340000 {
-                               label = "artbak";
-                               reg = <0x1340000 0x0140000>;
-                               read-only;
-                       };
-
-                       kernel@1480000 {
-                               label = "kernel";
-                               reg = <0x1480000 0x0200000>;
-                       };
-
-                       ubi@1680000 {
-                               label = "ubi";
-                               reg = <0x1680000 0x1E00000>;
-                       };
-
-                       netgear@3480000 {
-                               label = "netgear";
-                               reg = <0x3480000 0x4480000>;
-                               read-only;
-                       };
-
-                       reserve@7900000 {
-                               label = "reserve";
-                               reg = <0x7900000 0x0700000>;
-                               read-only;
-                       };
-
-                       firmware@1480000 {
-                               label = "firmware";
-                               reg = <0x1480000 0x2000000>;
-                       };
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       phy-handle = <&phy4>;
-                       qcom,id = <1>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-
-                       mtd-mac-address = <&art 6>;
-               };
-
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-
-                       mtd-mac-address = <&art 0>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               usb1 {
-                       label = "d7800:white:usb1";
-                       gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb2 {
-                       label = "d7800:white:usb2";
-                       gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               power_amber: power_amber {
-                       label = "d7800:amber:power";
-                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan_white {
-                       label = "d7800:white:wan";
-                       gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan_amber {
-                       label = "d7800:amber:wan";
-                       gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-               };
-
-               wps {
-                       label = "d7800:white:wps";
-                       gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-               };
-
-               esata {
-                       label = "d7800:white:esata";
-                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-               };
-
-               power_white: power_white {
-                       label = "d7800:white:power";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               wifi {
-                       label = "d7800:white:wifi";
-                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&adm_dma {
-       status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
deleted file mode 100644 (file)
index b5840e8..0000000
+++ /dev/null
@@ -1,399 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Linksys EA8500 WiFi Router";
-       compatible = "linksys,ea8500", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
-       };
-
-       chosen {
-               bootargs = "console=ttyMSM0,115200n8"; 
-               linux,stdout-path = "serial0:115200n8";
-               append-rootblock = "ubi.mtd=";  /* append to bootargs adding the root deviceblock nbr from bootloader */
-       };
-
-       soc {
-               pinmux@800000 {
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio65", "gpio67", "gpio68";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       led_pins: led_pins {
-                               mux {
-                                       pins = "gpio6", "gpio53", "gpio54";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       nand_pins: nand_pins {
-                               mux {
-                                       pins = "gpio34", "gpio35", "gpio36",
-                                              "gpio37", "gpio38", "gpio39",
-                                              "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       function = "nand";
-                                       drive-strength = <10>;
-                                       bias-disable;
-                               };
-                               pullups {
-                                       pins = "gpio39";
-                                       bias-pull-up;
-                               };
-                               hold {
-                                       pins = "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       bias-bus-hold;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               sata-phy@1b400000 {
-                       status = "ok";
-               };
-
-               sata@29000000 {
-                       status = "ok";
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-               };
-
-               usb30@1 {
-                       status = "ok";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-               
-               pcie2: pci@1b900000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-               
-               nand@1ac00000 {
-                       status = "ok";
-
-                       pinctrl-0 = <&nand_pins>;
-                       pinctrl-names = "default";
-
-                       nand-ecc-strength = <4>;
-                       nand-bus-width = <8>;
-
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       SBL1@0 {
-                               label = "SBL1";
-                               reg = <0x0000000 0x0040000>;
-                               read-only;
-                       };
-
-                       MIBIB@40000 {
-                               label = "MIBIB";
-                               reg = <0x0040000 0x0140000>;
-                               read-only;
-                       };
-
-                       SBL2@180000 {
-                               label = "SBL2";
-                               reg = <0x0180000 0x0140000>;
-                               read-only;
-                       };
-
-                       SBL3@2c0000 {
-                               label = "SBL3";
-                               reg = <0x02c0000 0x0280000>;
-                               read-only;
-                       };
-
-                       DDRCONFIG@540000 {
-                               label = "DDRCONFIG";
-                               reg = <0x0540000 0x0120000>;
-                               read-only;
-                       };
-
-                       SSD@660000 {
-                               label = "SSD";
-                               reg = <0x0660000 0x0120000>;
-                               read-only;
-                       };
-
-                       TZ@780000 {
-                               label = "TZ";
-                               reg = <0x0780000 0x0280000>;
-                               read-only;
-                       };
-
-                       RPM@a00000 {
-                               label = "RPM";
-                               reg = <0x0a00000 0x0280000>;
-                               read-only;
-                       };
-
-                       art: art@c80000 {
-                               label = "art";
-                               reg = <0x0c80000 0x0140000>;
-                               read-only;
-                       };
-
-                       APPSBL@dc0000 {
-                               label = "APPSBL";
-                               reg = <0x0dc0000 0x0100000>;
-                               read-only;
-                       };
-
-                       u_env@ec0000 {
-                               label = "u_env";
-                               reg = <0x0ec0000 0x0040000>;
-                       };
-
-                       s_env@f00000 {
-                               label = "s_env";
-                               reg = <0x0f00000 0x0040000>;
-                       };
-
-                       devinfo@f40000 {
-                               label = "devinfo";
-                               reg = <0x0f40000 0x0040000>;
-                       };
-
-                       linux@f80000 { 
-                               label = "kernel1";
-                               reg = <0x0f80000 0x2800000>;  /* 3 MB spill to rootfs*/
-                       };
-
-                       rootfs@1280000 {
-                               label = "rootfs1";
-                               reg = <0x1280000 0x2500000>;
-                       };
-
-                       linux2@3780000 {
-                               label = "kernel2";
-                               reg = <0x3780000 0x2800000>;
-                       };
-
-                       rootfs2@3a80000 {
-                               label = "rootfs2";
-                               reg = <0x3a80000 0x2500000>;
-                       };
-
-                       syscfg@5f80000 {
-                               label = "syscfg";
-                               reg = <0x5f80000 0x2080000>;
-                       };
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       qcom,id = <1>;
-                       qcom,phy_mdio_addr = <4>;
-                       qcom,poll_required = <1>;
-                       qcom,rgmii_delay = <0>;
-                       qcom,emulation = <0>;
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-               //lan
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-                       qcom,phy_mdio_addr = <0>;       /* none */
-                       qcom,poll_required = <0>;       /* no polling */
-                       qcom,rgmii_delay = <0>;
-                       qcom,emulation = <0>;
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-
-               adm_dma: dma@18300000 {
-                       status = "ok";
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART >;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               wps {
-                       label = "ea8500:green:wps";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-               };
-
-               power: power {
-                       label = "ea8500:white:power";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       default-state = "keep";
-               };
-
-               wifi {
-                       label = "ea8500:green:wifi";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
deleted file mode 100644 (file)
index fc35df7..0000000
+++ /dev/null
@@ -1,373 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear Nighthawk X4 R7500";
-       compatible = "netgear,r7500", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0xe000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &power_white;
-               led-failsafe = &power_amber;
-               led-running = &power_white;
-               led-upgrade = &power_amber;
-       };
-
-       chosen {
-               bootargs = "rootfstype=squashfs noinitrd";
-               linux,stdout-path = "serial0:115200n8";
-       };
-
-       soc {
-               pinmux@800000 {
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio6", "gpio54", "gpio65";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       led_pins: led_pins {
-                               mux {
-                                       pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-                                               "gpio24","gpio26", "gpio53", "gpio64";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       nand_pins: nand_pins {
-                               mux {
-                                       pins = "gpio34", "gpio35", "gpio36",
-                                              "gpio37", "gpio38", "gpio39",
-                                              "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       function = "nand";
-                                       drive-strength = <10>;
-                                       bias-disable;
-                               };
-                               pullups {
-                                       pins = "gpio39";
-                                       bias-pull-up;
-                               };
-                               hold {
-                                       pins = "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       bias-bus-hold;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               sata-phy@1b400000 {
-                       status = "ok";
-               };
-
-               sata@29000000 {
-                       status = "ok";
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-               };
-
-               usb30@1 {
-                       status = "ok";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-               };
-
-               nand@1ac00000 {
-                       status = "ok";
-
-                       pinctrl-0 = <&nand_pins>;
-                       pinctrl-names = "default";
-
-                       nand-ecc-strength = <4>;
-                       nand-bus-width = <8>;
-
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       qcadata@0 {
-                               label = "qcadata";
-                               reg = <0x0000000 0x0c80000>;
-                               read-only;
-                       };
-
-                       APPSBL@c80000 {
-                               label = "APPSBL";
-                               reg = <0x0c80000 0x0500000>;
-                               read-only;
-                       };
-
-                       APPSBLENV@1180000 {
-                               label = "APPSBLENV";
-                               reg = <0x1180000 0x0080000>;
-                               read-only;
-                       };
-
-                       art: art@1200000 {
-                               label = "art";
-                               reg = <0x1200000 0x0140000>;
-                               read-only;
-                       };
-
-                       kernel@1340000 {
-                               label = "kernel";
-                               reg = <0x1340000 0x0200000>;
-                       };
-
-                       ubi@1540000 {
-                               label = "ubi";
-                               reg = <0x1540000 0x1800000>;
-                       };
-
-                       netgear@2d40000 {
-                               label = "netgear";
-                               reg = <0x2d40000 0x0c00000>;
-                               read-only;
-                       };
-
-                       reserve@3940000 {
-                               label = "reserve";
-                               reg = <0x3940000 0x46c0000>;
-                               read-only;
-                       };
-
-                       firmware@1340000 {
-                               label = "firmware";
-                               reg = <0x1340000 0x1a00000>;
-                       };
-
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       qcom,id = <1>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-
-                       mtd-mac-address = <&art 6>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-
-                       mtd-mac-address = <&art 0>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               usb1 {
-                       label = "r7500:white:usb1";
-                       gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb2 {
-                       label = "r7500:white:usb2";
-                       gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               power_amber: power_amber {
-                       label = "r7500:amber:power";
-                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan_white {
-                       label = "r7500:white:wan";
-                       gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan_amber {
-                       label = "r7500:amber:wan";
-                       gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-               };
-
-               wps {
-                       label = "r7500:white:wps";
-                       gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-               };
-
-               esata {
-                       label = "r7500:white:esata";
-                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-               };
-
-               power_white: power_white {
-                       label = "r7500:white:power";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               wifi {
-                       label = "r7500:white:wifi";
-                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&adm_dma {
-       status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
deleted file mode 100644 (file)
index 4edfbeb..0000000
+++ /dev/null
@@ -1,416 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear Nighthawk X4 R7500v2";
-       compatible = "netgear,r7500v2", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-
-               rsvd@5fe00000 {
-                       reg = <0x5fe00000 0x200000>;
-                       reusable;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
-       };
-
-       chosen {
-               bootargs = "rootfstype=squashfs noinitrd";
-               linux,stdout-path = "serial0:115200n8";
-       };
-
-       soc {
-               pinmux@800000 {
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio6", "gpio54", "gpio65";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       led_pins: led_pins {
-                               mux {
-                                       pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-                                               "gpio24","gpio26", "gpio53", "gpio64";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       nand_pins: nand_pins {
-                               mux {
-                                       pins = "gpio34", "gpio35", "gpio36",
-                                              "gpio37", "gpio38", "gpio39",
-                                              "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       function = "nand";
-                                       drive-strength = <10>;
-                                       bias-disable;
-                               };
-                               pullups {
-                                       pins = "gpio39";
-                                       bias-pull-up;
-                               };
-                               hold {
-                                       pins = "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       bias-bus-hold;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       usb0_pwr_en_pins: usb0_pwr_en_pins {
-                               mux {
-                                       pins = "gpio15";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                                       bias-pull-down;
-                                       output-high;
-                               };
-                       };
-
-                       usb1_pwr_en_pins: usb1_pwr_en_pins {
-                               mux {
-                                       pins = "gpio16", "gpio68";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                                       bias-pull-down;
-                                       output-high;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               sata-phy@1b400000 {
-                       status = "ok";
-               };
-
-               sata@29000000 {
-                       status = "ok";
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb0_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               usb30@1 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb1_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-                       reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-                       pinctrl-0 = <&pcie0_pins>;
-                       pinctrl-names = "default";
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-                       reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-                       pinctrl-0 = <&pcie1_pins>;
-                       pinctrl-names = "default";
-               };
-
-               nand@1ac00000 {
-                       status = "ok";
-
-                       pinctrl-0 = <&nand_pins>;
-                       pinctrl-names = "default";
-
-                       nand-ecc-strength = <4>;
-                       nand-bus-width = <8>;
-
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       qcadata@0 {
-                               label = "qcadata";
-                               reg = <0x0000000 0x0c80000>;
-                               read-only;
-                       };
-
-                       APPSBL@c80000 {
-                               label = "APPSBL";
-                               reg = <0x0c80000 0x0500000>;
-                               read-only;
-                       };
-
-                       APPSBLENV@1180000 {
-                               label = "APPSBLENV";
-                               reg = <0x1180000 0x0080000>;
-                               read-only;
-                       };
-
-                       art: art@1200000 {
-                               label = "art";
-                               reg = <0x1200000 0x0140000>;
-                               read-only;
-                       };
-
-                       artbak: art@1340000 {
-                               label = "artbak";
-                               reg = <0x1340000 0x0140000>;
-                               read-only;
-                       };
-
-                       kernel@1480000 {
-                               label = "kernel";
-                               reg = <0x1480000 0x0200000>;
-                       };
-
-                       ubi@1680000 {
-                               label = "ubi";
-                               reg = <0x1680000 0x1E00000>;
-                       };
-
-                       netgear@3480000 {
-                               label = "netgear";
-                               reg = <0x3480000 0x4480000>;
-                               read-only;
-                       };
-
-                       reserve@7900000 {
-                               label = "reserve";
-                               reg = <0x7900000 0x0700000>;
-                               read-only;
-                       };
-
-                       firmware@1480000 {
-                               label = "firmware";
-                               reg = <0x1480000 0x2000000>;
-                       };
-
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0xaa545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       qcom,id = <1>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-
-                       mtd-mac-address = <&art 6>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-
-                       mtd-mac-address = <&art 0>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               usb1 {
-                       label = "r7500v2:amber:usb1";
-                       gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb3 {
-                       label = "r7500v2:amber:usb3";
-                       gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               status {
-                       label = "r7500v2:amber:status";
-                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               internet {
-                       label = "r7500v2:white:internet";
-                       gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan {
-                       label = "r7500v2:white:wan";
-                       gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-               };
-
-               wps {
-                       label = "r7500v2:white:wps";
-                       gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-               };
-
-               esata {
-                       label = "r7500v2:white:esata";
-                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-               };
-
-               power: power {
-                       label = "r7500v2:white:power";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               wifi {
-                       label = "r7500v2:white:wifi";
-                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&adm_dma {
-       status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
deleted file mode 100644 (file)
index 407c180..0000000
+++ /dev/null
@@ -1,425 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "TP-Link Archer VR2600v";
-       compatible = "tplink,vr2600v", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &power;
-               led-failsafe = &general;
-               led-running = &power;
-               led-upgrade = &general;
-       };
-
-       chosen {
-               linux,stdout-path = "serial0:115200n8";
-       };
-
-       soc {
-               pinmux@800000 {
-                       led_pins: led_pins {
-                               mux {
-                                       pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
-                                               "gpio26", "gpio53", "gpio56", "gpio66";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       spi_pins: spi_pins {
-                               mux {
-                                       pins = "gpio18", "gpio19", "gpio21";
-                                       function = "gsbi5";
-                                       bias-pull-down;
-                               };
-
-                               data {
-                                       pins = "gpio18", "gpio19";
-                                       drive-strength = <10>;
-                               };
-
-                               cs {
-                                       pins = "gpio20";
-                                       drive-strength = <10>;
-                                       bias-pull-up;
-                               };
-
-                               clk {
-                                       pins = "gpio21";
-                                       drive-strength = <12>;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               gsbi5: gsbi@1a200000 {
-                       qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
-
-                       spi4: spi@1a280000 {
-                               status = "ok";
-
-                               pinctrl-0 = <&spi_pins>;
-                               pinctrl-names = "default";
-
-                               cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-                               flash: W25Q128@0 {
-                                       compatible = "jedec,spi-nor";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-                                       spi-max-frequency = <50000000>;
-                                       reg = <0>;
-
-                                       SBL1@0 {
-                                               label = "SBL1";
-                                               reg = <0x0 0x20000>;
-                                               read-only;
-                                       };
-
-                                       MIBIB@20000 {
-                                               label = "MIBIB";
-                                               reg = <0x20000 0x20000>;
-                                               read-only;
-                                       };
-
-                                       SBL2@40000 {
-                                               label = "SBL2";
-                                               reg = <0x40000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       SBL3@80000 {
-                                               label = "SBL3";
-                                               reg = <0x80000 0x80000>;
-                                               read-only;
-                                       };
-
-                                       DDRCONFIG@100000 {
-                                               label = "DDRCONFIG";
-                                               reg = <0x100000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       SSD@110000 {
-                                               label = "SSD";
-                                               reg = <0x110000 0x10000>;
-                                               read-only;
-                                       };
-
-                                       TZ@120000 {
-                                               label = "TZ";
-                                               reg = <0x120000 0x80000>;
-                                               read-only;
-                                       };
-
-                                       RPM@1a0000 {
-                                               label = "RPM";
-                                               reg = <0x1a0000 0x80000>;
-                                               read-only;
-                                       };
-
-                                       APPSBL@220000 {
-                                               label = "APPSBL";
-                                               reg = <0x220000 0x80000>;
-                                               read-only;
-                                       };
-
-                                       APPSBLENV@2a0000 {
-                                               label = "APPSBLENV";
-                                               reg = <0x2a0000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       OLDART@2e0000 {
-                                               label = "OLDART";
-                                               reg = <0x2e0000 0x40000>;
-                                               read-only;
-                                       };
-
-                                       kernel@320000 {
-                                               label = "kernel";
-                                               reg = <0x320000 0x200000>;
-                                       };
-
-                                       rootfs@520000 {
-                                               label = "rootfs";
-                                               reg = <0x520000 0xa60000>;
-                                       };
-
-                                       defaultmac: default-mac@0xfaf100 {
-                                               label = "default-mac";
-                                               reg = <0xfaf100 0x00200>;
-                                               read-only;
-                                       };
-
-                                       ART@fc0000 {
-                                               label = "ART";
-                                               reg = <0xfc0000 0x40000>;
-                                               read-only;
-                                       };
-                               };
-                       };
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-               };
-
-               usb30@1 {
-                       status = "ok";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       qcom,id = <1>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-
-                       mtd-mac-address = <&defaultmac 0>;
-                       mtd-mac-address-increment = <1>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-
-                       mtd-mac-address = <&defaultmac 0>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-
-               dect {
-                       label = "dect";
-                       gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_PHONE>;
-               };
-
-               ledswitch {
-                       label = "ledswitch";
-                       gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_LIGHTS_TOGGLE>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               dsl {
-                       label = "vr2600v:white:dsl";
-                       gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb {
-                       label = "vr2600v:white:usb";
-                       gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               lan {
-                       label = "vr2600v:white:lan";
-                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               wlan2g {
-                       label = "vr2600v:white:wlan2g";
-                       gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
-               };
-
-               wlan5g {
-                       label = "vr2600v:white:wlan5g";
-                       gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
-               };
-
-               power: power {
-                       label = "vr2600v:white:power";
-                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               phone {
-                       label = "vr2600v:white:phone";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan {
-                       label = "vr2600v:white:wan";
-                       gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
-               };
-
-               general: general {
-                       label = "vr2600v:white:general";
-                       gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&adm_dma {
-       status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
deleted file mode 100644 (file)
index 4db1a30..0000000
+++ /dev/null
@@ -1,388 +0,0 @@
-#include "qcom-ipq8065-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "ZyXEL NBG6817";
-       compatible = "zyxel,nbg6817", "qcom,ipq8065";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-               sdcc1 = &sdcc1;
-
-               led-boot = &power;
-               led-failsafe = &power;
-               led-running = &power;
-               led-upgrade = &power;
-       };
-
-       chosen {
-               bootargs = "root=/dev/mmcblk0p5 rootfstype=squashfs,ext4 rootwait noinitrd";
-               linux,stdout-path = "serial0:115200n8";
-       };
-
-       soc {
-               pinmux@800000 {
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio6", "gpio54", "gpio65";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       led_pins: led_pins {
-                               mux {
-                                       pins = "gpio9", "gpio26", "gpio33", "gpio64";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-down;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-
-                               clk {
-                                       pins = "gpio1";
-                                       input-disable;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-
-                               tx {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-                                       input-disable;
-                               };
-                       };
-
-                       spi_pins: spi_pins {
-                               mux {
-                                       pins = "gpio18", "gpio19", "gpio21";
-                                       function = "gsbi5";
-                                       drive-strength = <10>;
-                                       bias-none;
-                               };
-
-                               cs {
-                                       pins = "gpio20";
-                                       drive-strength = <12>;
-                               };
-                       };
-
-                       usb0_pwr_en_pins: usb0_pwr_en_pins {
-                               mux {
-                                       pins = "gpio16", "gpio17";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                               };
-
-                               pwr {
-                                       pins = "gpio17";
-                                       bias-pull-down;
-                                       output-high;
-                               };
-
-                               ovc {
-                                       pins = "gpio16";
-                                       bias-pull-up;
-                               };
-                       };
-
-                       usb1_pwr_en_pins: usb1_pwr_en_pins {
-                               mux {
-                                       pins = "gpio14", "gpio15";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                               };
-
-                               pwr {
-                                       pins = "gpio14";
-                                       bias-pull-down;
-                                       output-high;
-                               };
-
-                               ovc {
-                                       pins = "gpio15";
-                                       bias-pull-up;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               gsbi5: gsbi@1a200000 {
-                       qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
-
-                       spi4: spi@1a280000 {
-                               status = "ok";
-
-                               pinctrl-0 = <&spi_pins>;
-                               pinctrl-names = "default";
-
-                               cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-                               flash: m25p80@0 {
-                                       compatible = "jedec,spi-nor";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-                                       spi-max-frequency = <51200000>;
-                                       reg = <0>;
-
-                                       linux,part-probe = "qcom-smem";
-                               };
-                       };
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb0_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               usb30@1 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb1_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-                       reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-                       pinctrl-0 = <&pcie0_pins>;
-                       pinctrl-names = "default";
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-                       reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-                       pinctrl-0 = <&pcie1_pins>;
-                       pinctrl-names = "default";
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0xaa545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
-                                       0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
-                                       0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-                                       0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-                                       0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-                                       0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-                                       0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-                                       0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-                                       0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-                                       0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-                                       0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-                                       0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-                                       0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-                                       0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-                                       >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                               qca,ar8327-initvals = <
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       >;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       qcom,id = <1>;
-                       qcom,phy_mdio_addr = <4>;
-                       qcom,poll_required = <0>;
-                       qcom,rgmii_delay = <1>;
-                       qcom,phy_mii_type = <0>;
-                       qcom,emulation = <0>;
-                       qcom,irq = <255>;
-                       mdiobus = <&mdio0>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-                       qcom,phy_mdio_addr = <0>;       /* none */
-                       qcom,poll_required = <0>;       /* no polling */
-                       qcom,rgmii_delay = <0>;
-                       qcom,phy_mii_type = <1>;
-                       qcom,emulation = <0>;
-                       qcom,irq = <258>;
-                       mdiobus = <&mdio0>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-
-               amba {
-                       sdcc1: sdcc@12400000 {
-                               status = "okay";
-                       };
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               internet {
-                       label = "nbg6817:white:internet";
-                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-               };
-
-               power: power {
-                       label = "nbg6817:white:power";
-                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               wifi2g {
-                       label = "nbg6817:amber:wifi2g";
-                       gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
-               };
-
-               /* wifi2g amber from the manual is missing */
-
-               wifi5g {
-                       label = "nbg6817:amber:wifi5g";
-                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-               };
-
-               /* wifi5g amber from the manual is missing */
-       };
-};
-
-&adm_dma {
-       status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
deleted file mode 100644 (file)
index 79c8334..0000000
+++ /dev/null
@@ -1,566 +0,0 @@
-#include "qcom-ipq8065-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-       model = "Netgear Nighthawk X4S R7800";
-       compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
-
-       memory@0 {
-               reg = <0x42000000 0x1e000000>;
-               device_type = "memory";
-       };
-
-       reserved-memory {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               ranges;
-               rsvd@41200000 {
-                       reg = <0x41200000 0x300000>;
-                       no-map;
-               };
-
-               rsvd@5fe00000 {
-                       reg = <0x5fe00000 0x200000>;
-                       reusable;
-               };
-       };
-
-       aliases {
-               serial0 = &uart4;
-               mdio-gpio0 = &mdio0;
-
-               led-boot = &power_white;
-               led-failsafe = &power_amber;
-               led-running = &power_white;
-               led-upgrade = &power_amber;
-       };
-
-       chosen {
-               linux,stdout-path = "serial0:115200n8";
-       };
-
-       soc {
-               pinmux@800000 {
-                       button_pins: button_pins {
-                               mux {
-                                       pins = "gpio6", "gpio54", "gpio65";
-                                       function = "gpio";
-                                       drive-strength = <2>;
-                                       bias-pull-up;
-                               };
-                       };
-
-                       i2c4_pins: i2c4_pinmux {
-                               mux {
-                                       pins = "gpio12", "gpio13";
-                                       function = "gsbi4";
-                                       drive-strength = <12>;
-                                       bias-disable;
-                               };
-                       };
-
-                       led_pins: led_pins {
-                               pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
-                                       "gpio24","gpio26", "gpio53", "gpio64";
-                               function = "gpio";
-                               drive-strength = <2>;
-                               bias-pull-down;
-                       };
-
-                       nand_pins: nand_pins {
-                               mux {
-                                       pins = "gpio34", "gpio35", "gpio36",
-                                              "gpio37", "gpio38", "gpio39",
-                                              "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       function = "nand";
-                                       drive-strength = <10>;
-                                       bias-disable;
-                               };
-                               pullups {
-                                       pins = "gpio39";
-                                       bias-pull-up;
-                               };
-                               hold {
-                                       pins = "gpio40", "gpio41", "gpio42",
-                                              "gpio43", "gpio44", "gpio45",
-                                              "gpio46", "gpio47";
-                                       bias-bus-hold;
-                               };
-                       };
-
-                       mdio0_pins: mdio0_pins {
-                               mux {
-                                       pins = "gpio0", "gpio1";
-                                       function = "gpio";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-
-                               clk {
-                                       pins = "gpio1";
-                                       input-disable;
-                               };
-                       };
-
-                       rgmii2_pins: rgmii2_pins {
-                               mux {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-                                              "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-                                       function = "rgmii2";
-                                       drive-strength = <8>;
-                                       bias-disable;
-                               };
-
-                               tx {
-                                       pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
-                                       input-disable;
-                               };
-                       };
-
-                       spi_pins: spi_pins {
-                               mux {
-                                       pins = "gpio18", "gpio19", "gpio21";
-                                       function = "gsbi5";
-                                       bias-pull-down;
-                               };
-
-                               data {
-                                       pins = "gpio18", "gpio19";
-                                       drive-strength = <10>;
-                               };
-
-                               cs {
-                                       pins = "gpio20";
-                                       drive-strength = <10>;
-                                       bias-pull-up;
-                               };
-
-                               clk {
-                                       pins = "gpio21";
-                                       drive-strength = <12>;
-                               };
-                       };
-
-                       spi6_pins: spi6_pins {
-                               mux {
-                                       pins = "gpio55", "gpio56", "gpio58";
-                                       function = "gsbi6";
-                                       bias-pull-down;
-                               };
-
-                               mosi {
-                                       pins = "gpio55";
-                                       drive-strength = <12>;
-                               };
-
-                               miso {
-                                       pins = "gpio56";
-                                       drive-strength = <14>;
-                               };
-
-                               cs {
-                                       pins = "gpio57";
-                                       drive-strength = <12>;
-                                       bias-pull-up;
-                               };
-
-                               clk {
-                                       pins = "gpio58";
-                                       drive-strength = <12>;
-                               };
-
-                               reset {
-                                       pins = "gpio33";
-                                       drive-strength = <10>;
-                                       bias-pull-down;
-                                       output-high;
-                               };
-                       };
-
-                       usb0_pwr_en_pins: usb0_pwr_en_pins {
-                               mux {
-                                       pins = "gpio15";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                                       bias-pull-down;
-                                       output-high;
-                               };
-                       };
-
-                       usb1_pwr_en_pins: usb1_pwr_en_pins {
-                               mux {
-                                       pins = "gpio16", "gpio68";
-                                       function = "gpio";
-                                       drive-strength = <12>;
-                                       bias-pull-down;
-                                       output-high;
-                               };
-                       };
-               };
-
-               gsbi@16300000 {
-                       qcom,mode = <GSBI_PROT_I2C_UART>;
-                       status = "ok";
-                       serial@16340000 {
-                               status = "ok";
-                       };
-                       /*
-                        * The i2c device on gsbi4 should not be enabled.
-                        * On ipq806x designs gsbi4 i2c is meant for exclusive
-                        * RPM usage. Turning this on in kernel manifests as
-                        * i2c failure for the RPM.
-                        */
-               };
-
-               gsbi5: gsbi@1a200000 {
-                       qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
-
-                       spi5: spi@1a280000 {
-                               status = "ok";
-
-                               pinctrl-0 = <&spi_pins>;
-                               pinctrl-names = "default";
-
-                               cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
-                               flash: m25p80@0 {
-                                       compatible = "jedec,spi-nor";
-                                       #address-cells = <1>;
-                                       #size-cells = <1>;
-                                       spi-max-frequency = <50000000>;
-                                       reg = <0>;
-
-                                       linux,part-probe = "qcom-smem";
-                               };
-                       };
-               };
-
-               gsbi6: gsbi@16500000 {
-                       qcom,mode = <GSBI_PROT_SPI>;
-                       status = "ok";
-                       spi6: spi@16580000 {
-                               status = "ok";
-
-                               pinctrl-0 = <&spi6_pins>;
-                               pinctrl-names = "default";
-
-                               cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
-
-                               spi-nor@0 {
-                                       compatible = "jedec,spi-nor";
-                                       reg = <0>;
-                                       spi-max-frequency = <6000000>;
-                               };
-                       };
-               };
-
-               sata-phy@1b400000 {
-                       status = "ok";
-               };
-
-               sata@29000000 {
-                       ports-implemented = <0x1>;
-                       status = "ok";
-               };
-
-               phy@100f8800 {          /* USB3 port 1 HS phy */
-                       status = "ok";
-               };
-
-               phy@100f8830 {          /* USB3 port 1 SS phy */
-                       status = "ok";
-               };
-
-               phy@110f8800 {          /* USB3 port 0 HS phy */
-                       status = "ok";
-               };
-
-               phy@110f8830 {          /* USB3 port 0 SS phy */
-                       status = "ok";
-               };
-
-               usb30@0 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb0_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               usb30@1 {
-                       status = "ok";
-
-                       pinctrl-0 = <&usb1_pwr_en_pins>;
-                       pinctrl-names = "default";
-               };
-
-               pcie0: pci@1b500000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-
-               pcie1: pci@1b700000 {
-                       status = "ok";
-                       phy-tx0-term-offset = <7>;
-               };
-
-               nand@1ac00000 {
-                       status = "ok";
-
-                       pinctrl-0 = <&nand_pins>;
-                       pinctrl-names = "default";
-
-                       nand-ecc-strength = <4>;
-                       nand-ecc-step-size = <512>;
-                       nand-bus-width = <8>;
-
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-
-                       qcadata@0 {
-                               label = "qcadata";
-                               reg = <0x0000000 0x0c80000>;
-                               read-only;
-                       };
-
-                       APPSBL@c80000 {
-                               label = "APPSBL";
-                               reg = <0x0c80000 0x0500000>;
-                               read-only;
-                       };
-
-                       APPSBLENV@1180000 {
-                               label = "APPSBLENV";
-                               reg = <0x1180000 0x0080000>;
-                               read-only;
-                       };
-
-                       art: art@1200000 {
-                               label = "art";
-                               reg = <0x1200000 0x0140000>;
-                               read-only;
-                       };
-
-                       artbak: art@1340000 {
-                               label = "artbak";
-                               reg = <0x1340000 0x0140000>;
-                               read-only;
-                       };
-
-                       kernel@1480000 {
-                               label = "kernel";
-                               reg = <0x1480000 0x0200000>;
-                       };
-
-                       ubi@1680000 {
-                               label = "ubi";
-                               reg = <0x1680000 0x1E00000>;
-                       };
-
-                       netgear@3480000 {
-                               label = "netgear";
-                               reg = <0x3480000 0x4480000>;
-                               read-only;
-                       };
-
-                       reserve@7900000 {
-                               label = "reserve";
-                               reg = <0x7900000 0x0700000>;
-                               read-only;
-                       };
-
-                       firmware@1480000 {
-                               label = "firmware";
-                               reg = <0x1480000 0x2000000>;
-                       };
-               };
-
-               mdio0: mdio {
-                       compatible = "virtual,mdio-gpio";
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-                       pinctrl-0 = <&mdio0_pins>;
-                       pinctrl-names = "default";
-
-
-                       phy0: ethernet-phy@0 {
-                               device_type = "ethernet-phy";
-                               reg = <0>;
-                               qca,ar8327-initvals = <
-                                       0x00004 0x7600000   /* PAD0_MODE */
-                                       0x00008 0x1000000   /* PAD5_MODE */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       0x000e4 0xaa545     /* MAC_POWER_SEL */
-                                       0x000e0 0xc74164de  /* SGMII_CTRL */
-                                       0x0007c 0x4e        /* PORT0_STATUS */
-                                       0x00094 0x4e        /* PORT6_STATUS */
-                                       0x00970 0x1e864443  /* QM_PORT0_CTRL0 */
-                                       0x00974 0x000001c6  /* QM_PORT0_CTRL1 */
-                                       0x00978 0x19008643  /* QM_PORT1_CTRL0 */
-                                       0x0097c 0x000001c6  /* QM_PORT1_CTRL1 */
-                                       0x00980 0x19008643  /* QM_PORT2_CTRL0 */
-                                       0x00984 0x000001c6  /* QM_PORT2_CTRL1 */
-                                       0x00988 0x19008643  /* QM_PORT3_CTRL0 */
-                                       0x0098c 0x000001c6  /* QM_PORT3_CTRL1 */
-                                       0x00990 0x19008643  /* QM_PORT4_CTRL0 */
-                                       0x00994 0x000001c6  /* QM_PORT4_CTRL1 */
-                                       0x00998 0x1e864443  /* QM_PORT5_CTRL0 */
-                                       0x0099c 0x000001c6  /* QM_PORT5_CTRL1 */
-                                       0x009a0 0x1e864443  /* QM_PORT6_CTRL0 */
-                                       0x009a4 0x000001c6  /* QM_PORT6_CTRL1 */
-                                       >;
-                               qca,ar8327-vlans = <
-                                       0x1     0x5e        /* VLAN1 Ports 1/2/3/4/6 */
-                                       0x2     0x21        /* VLAN2 Ports 0/5 */
-                               >;
-                       };
-
-                       phy4: ethernet-phy@4 {
-                               device_type = "ethernet-phy";
-                               reg = <4>;
-                               qca,ar8327-initvals = <
-                                       0x000e4 0x6a545     /* MAC_POWER_SEL */
-                                       0x0000c 0x80        /* PAD6_MODE */
-                                       >;
-                       };
-               };
-
-               gmac1: ethernet@37200000 {
-                       status = "ok";
-                       phy-mode = "rgmii";
-                       qcom,id = <1>;
-                       qcom,phy_mdio_addr = <4>;
-                       qcom,poll_required = <0>;
-                       qcom,rgmii_delay = <1>;
-                       qcom,phy_mii_type = <0>;
-                       qcom,emulation = <0>;
-                       qcom,irq = <255>;
-                       mdiobus = <&mdio0>;
-
-                       pinctrl-0 = <&rgmii2_pins>;
-                       pinctrl-names = "default";
-
-                       mtd-mac-address = <&art 6>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               gmac2: ethernet@37400000 {
-                       status = "ok";
-                       phy-mode = "sgmii";
-                       qcom,id = <2>;
-                       qcom,phy_mdio_addr = <0>;       /* none */
-                       qcom,poll_required = <0>;       /* no polling */
-                       qcom,rgmii_delay = <0>;
-                       qcom,phy_mii_type = <1>;
-                       qcom,emulation = <0>;
-                       qcom,irq = <258>;
-                       mdiobus = <&mdio0>;
-
-                       mtd-mac-address = <&art 0>;
-
-                       fixed-link {
-                               speed = <1000>;
-                               full-duplex;
-                       };
-               };
-
-               rpm@108000 {
-                       pinctrl-0 = <&i2c4_pins>;
-                       pinctrl-names = "default";
-               };
-       };
-
-       gpio-keys {
-               compatible = "gpio-keys";
-               pinctrl-0 = <&button_pins>;
-               pinctrl-names = "default";
-
-               wifi {
-                       label = "wifi";
-                       gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RFKILL>;
-                       debounce-interval = <60>;
-                       wakeup-source;
-               };
-
-               reset {
-                       label = "reset";
-                       gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_RESTART>;
-                       debounce-interval = <60>;
-                       wakeup-source;
-               };
-
-               wps {
-                       label = "wps";
-                       gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
-                       linux,code = <KEY_WPS_BUTTON>;
-                       debounce-interval = <60>;
-                       wakeup-source;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-               pinctrl-0 = <&led_pins>;
-               pinctrl-names = "default";
-
-               power_white: power_white {
-                       label = "r7800:white:power";
-                       gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
-                       default-state = "keep";
-               };
-
-               power_amber: power_amber {
-                       label = "r7800:amber:power";
-                       gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan_white {
-                       label = "r7800:white:wan";
-                       gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
-               };
-
-               wan_amber {
-                       label = "r7800:amber:wan";
-                       gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb1 {
-                       label = "r7800:white:usb1";
-                       gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
-               };
-
-               usb2 {
-                       label = "r7800:white:usb2";
-                       gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
-               };
-
-               esata {
-                       label = "r7800:white:esata";
-                       gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
-               };
-
-               wifi {
-                       label = "r7800:white:wifi";
-                       gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
-               };
-
-               wps {
-                       label = "r7800:white:wps";
-                       gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
-               };
-       };
-};
-
-&adm_dma {
-       status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065-v1.0.dtsi
deleted file mode 100644 (file)
index 22b5338..0000000
+++ /dev/null
@@ -1 +0,0 @@
-#include "qcom-ipq8065.dtsi"
diff --git a/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-4.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
deleted file mode 100644 (file)
index b3ccb2e..0000000
+++ /dev/null
@@ -1,153 +0,0 @@
-#include "qcom-ipq8064.dtsi"
-
-/ {
-       model = "Qualcomm IPQ8065";
-       compatible = "qcom,ipq8065", "qcom,ipq8064";
-
-       qcom,pvs {
-               qcom,pvs-format-a;
-               qcom,speed0-pvs0-bin-v0 =
-                       < 1725000000 1262500 >,
-                       < 1400000000 1175000 >,
-                       < 1000000000 1100000 >,
-                        < 800000000 1050000 >,
-                        < 600000000 1000000 >,
-                        < 384000000 975000 >;
-               qcom,speed0-pvs1-bin-v0 =
-                       < 1725000000 1225000 >,
-                       < 1400000000 1150000 >,
-                       < 1000000000 1075000 >,
-                        < 800000000 1025000 >,
-                        < 600000000 975000 >,
-                        < 384000000 950000 >;
-               qcom,speed0-pvs2-bin-v0 =
-                       < 1725000000 1200000 >,
-                       < 1400000000 1125000 >,
-                       < 1000000000 1050000 >,
-                        < 800000000 1000000 >,
-                        < 600000000 950000 >,
-                        < 384000000 925000 >;
-               qcom,speed0-pvs3-bin-v0 =
-                       < 1725000000 1175000 >,
-                       < 1400000000 1100000 >,
-                       < 1000000000 1025000 >,
-                        < 800000000 975000 >,
-                        < 600000000 925000 >,
-                        < 384000000 900000 >;
-               qcom,speed0-pvs4-bin-v0 =
-                       < 1725000000 1150000 >,
-                       < 1400000000 1075000 >,
-                       < 1000000000 1000000 >,
-                        < 800000000 950000 >,
-                        < 600000000 900000 >,
-                        < 384000000 875000 >;
-               qcom,speed0-pvs5-bin-v0 =
-                       < 1725000000 1100000 >,
-                       < 1400000000 1025000 >,
-                       < 1000000000 950000 >,
-                        < 800000000 900000 >,
-                        < 600000000 850000 >,
-                        < 384000000 825000 >;
-               qcom,speed0-pvs6-bin-v0 =
-                       < 1725000000 1050000 >,
-                       < 1400000000 975000 >,
-                       < 1000000000 900000 >,
-                        < 800000000 850000 >,
-                        < 600000000 800000 >,
-                        < 384000000 775000 >;
-       };
-
-       soc: soc {
-
-               rpm@108000 {
-
-                       regulators {
-
-                               smb208_s2a: s2a {
-                                       regulator-min-microvolt = <775000>;
-                                       regulator-max-microvolt = <1275000>;
-                               };
-
-                               smb208_s2b: s2b {
-                                       regulator-min-microvolt = <775000>;
-                                       regulator-max-microvolt = <1275000>;
-                               };
-                       };
-               };
-
-               /* Temporary fixed regulator */
-               vsdcc_fixed: vsdcc-regulator {
-                       compatible = "regulator-fixed";
-                       regulator-name = "SDCC Power";
-                       regulator-min-microvolt = <3300000>;
-                       regulator-max-microvolt = <3300000>;
-                       regulator-always-on;
-               };
-
-               sdcc1bam:dma@12402000 {
-                       compatible = "qcom,bam-v1.3.0";
-                       reg = <0x12402000 0x8000>;
-                       interrupts = <0 98 0>;
-                       clocks = <&gcc SDC1_H_CLK>;
-                       clock-names = "bam_clk";
-                       #dma-cells = <1>;
-                       qcom,ee = <0>;
-                };
-
-               sdcc3bam:dma@12182000 {
-                       compatible = "qcom,bam-v1.3.0";
-                       reg = <0x12182000 0x8000>;
-                       interrupts = <0 96 0>;
-                       clocks = <&gcc SDC3_H_CLK>;
-                       clock-names = "bam_clk";
-                       #dma-cells = <1>;
-                       qcom,ee = <0>;
-               };
-
-               amba {
-                       compatible = "arm,amba-bus";
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       ranges;
-                       sdcc1: sdcc@12400000 {
-                               status          = "disabled";
-                               compatible      = "arm,pl18x", "arm,primecell";
-                               arm,primecell-periphid = <0x00051180>;
-                               reg             = <0x12400000 0x2000>;
-                               interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-                               interrupt-names = "cmd_irq";
-                               clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-                               clock-names     = "mclk", "apb_pclk";
-                               bus-width       = <8>;
-                               max-frequency   = <96000000>;
-                               non-removable;
-                               cap-sd-highspeed;
-                               cap-mmc-highspeed;
-                               vmmc-supply = <&vsdcc_fixed>;
-                               dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-                               dma-names = "tx", "rx";
-                       };
-
-                       sdcc3: sdcc@12180000 {
-                               compatible      = "arm,pl18x", "arm,primecell";
-                               arm,primecell-periphid = <0x00051180>;
-                               status          = "disabled";
-                               reg             = <0x12180000 0x2000>;
-                               interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-                               interrupt-names = "cmd_irq";
-                               clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-                               clock-names     = "mclk", "apb_pclk";
-                               bus-width       = <8>;
-                               cap-sd-highspeed;
-                               cap-mmc-highspeed;
-                               max-frequency   = <192000000>;
-                               #mmc-ddr-1_8v;
-                               sd-uhs-sdr104;
-                               sd-uhs-ddr50;
-                               vqmmc-supply = <&vsdcc_fixed>;
-                               dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-                               dma-names = "tx", "rx";
-                       };
-               };
-       };
-};