target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh

   1 PART_NAME=firmware
   2 REQUIRE_IMAGE_METADATA=1
   3
   4 RAMFS_COPY_BIN='fw_printenv fw_setenv head'
   5 RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
   6
   7 xiaomi_initramfs_prepare() {
   8         # Wipe UBI if running initramfs
   9         [ "$(rootfs_type)" = "tmpfs" ] || return 0
  10
  11         local rootfs_mtdnum="$( find_mtd_index rootfs )"
  12         if [ ! "$rootfs_mtdnum" ]; then
  13                 echo "unable to find mtd partition rootfs"
  14                 return 1
  15         fi
  16
  17         local kern_mtdnum="$( find_mtd_index ubi_kernel )"
  18         if [ ! "$kern_mtdnum" ]; then
  19                 echo "unable to find mtd partition ubi_kernel"
  20                 return 1
  21         fi
  22
  23         ubidetach -m "$rootfs_mtdnum"
  24         ubiformat /dev/mtd$rootfs_mtdnum -y
  25
  26         ubidetach -m "$kern_mtdnum"
  27         ubiformat /dev/mtd$kern_mtdnum -y
  28 }
  29
  30 platform_check_image() {
  31         return 0;
  32 }
  33
  34 platform_pre_upgrade() {
  35         case "$(board_name)" in
  36         redmi,ax6|\
  37         xiaomi,ax3600|\
  38         xiaomi,ax9000)
  39                 xiaomi_initramfs_prepare
  40                 ;;
  41         esac
  42 }
  43
  44 platform_do_upgrade() {
  45         case "$(board_name)" in
  46         arcadyan,aw1000|\
  47         cmcc,rm2-6|\
  48         compex,wpq873|\
  49         dynalink,dl-wrx36|\
  50         edimax,cax1800|\
  51         netgear,rax120v2|\
  52         netgear,wax218|\
  53         netgear,wax620|\
  54         netgear,wax630|\
  55         zbtlink,zbt-z800ax)
  56                 nand_do_upgrade "$1"
  57                 ;;
  58         buffalo,wxr-5950ax12)
  59                 CI_KERN_UBIPART="rootfs"
  60                 CI_ROOT_UBIPART="user_property"
  61                 buffalo_upgrade_prepare
  62                 nand_do_flash_file "$1" || nand_do_upgrade_failed
  63                 nand_do_restore_config || nand_do_upgrade_failed
  64                 buffalo_upgrade_optvol
  65                 ;;
  66         edgecore,eap102)
  67                 active="$(fw_printenv -n active)"
  68                 if [ "$active" -eq "1" ]; then
  69                         CI_UBIPART="rootfs2"
  70                 else
  71                         CI_UBIPART="rootfs1"
  72                 fi
  73                 # force altbootcmd which handles partition change in u-boot
  74                 fw_setenv bootcount 3
  75                 fw_setenv upgrade_available 1
  76                 nand_do_upgrade "$1"
  77                 ;;
  78         linksys,mx4200v1|\
  79         linksys,mx4200v2|\
  80         linksys,mx5300)
  81                 boot_part="$(fw_printenv -n boot_part)"
  82                 if [ "$boot_part" -eq "1" ]; then
  83                         fw_setenv boot_part 2
  84                         CI_KERNPART="alt_kernel"
  85                         CI_UBIPART="alt_rootfs"
  86                 else
  87                         fw_setenv boot_part 1
  88                         CI_UBIPART="rootfs"
  89                 fi
  90                 fw_setenv boot_part_ready 3
  91                 fw_setenv auto_recovery yes
  92                 nand_do_upgrade "$1"
  93                 ;;
  94         prpl,haze|\
  95         qnap,301w)
  96                 kernelname="0:HLOS"
  97                 rootfsname="rootfs"
  98                 mmc_do_upgrade "$1"
  99                 ;;
 100         redmi,ax6|\
 101         xiaomi,ax3600|\
 102         xiaomi,ax9000)
 103                 # Make sure that UART is enabled
 104                 fw_setenv boot_wait on
 105                 fw_setenv uart_en 1
 106
 107                 # Enforce single partition.
 108                 fw_setenv flag_boot_rootfs 0
 109                 fw_setenv flag_last_success 0
 110                 fw_setenv flag_boot_success 1
 111                 fw_setenv flag_try_sys1_failed 8
 112                 fw_setenv flag_try_sys2_failed 8
 113
 114                 # Kernel and rootfs are placed in 2 different UBI
 115                 CI_KERN_UBIPART="ubi_kernel"
 116                 CI_ROOT_UBIPART="rootfs"
 117                 nand_do_upgrade "$1"
 118                 ;;
 119         yuncore,ax880)
 120                 active="$(fw_printenv -n active)"
 121                 if [ "$active" -eq "1" ]; then
 122                         CI_UBIPART="rootfs_1"
 123                 else
 124                         CI_UBIPART="rootfs"
 125                 fi
 126                 # force altbootcmd which handles partition change in u-boot
 127                 fw_setenv bootcount 3
 128                 fw_setenv upgrade_available 1
 129                 nand_do_upgrade "$1"
 130                 ;;
 131         zte,mf269)
 132                 CI_KERN_UBIPART="ubi_kernel"
 133                 CI_ROOT_UBIPART="rootfs"
 134                 nand_do_upgrade "$1"
 135                 ;;
 136         zyxel,nbg7815)
 137                 local config_mtdnum="$(find_mtd_index 0:bootconfig)"
 138                 [ -z "$config_mtdnum" ] && reboot
 139                 part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
 140                 if [ "$part_num" -eq "0" ]; then
 141                         kernelname="0:HLOS"
 142                         rootfsname="rootfs"
 143                         mmc_do_upgrade "$1"
 144                 else
 145                         kernelname="0:HLOS_1"
 146                         rootfsname="rootfs_1"
 147                         mmc_do_upgrade "$1"
 148                 fi
 149                 ;;
 150         *)
 151                 default_do_upgrade "$1"
 152                 ;;
 153         esac
 154 }