package/boot/uboot-mediatek/patches/450-add-bpi-r4.patch

   1 --- /dev/null
   2 +++ b/configs/mt7988a_bananapi_bpi-r4-emmc_defconfig
   3 @@ -0,0 +1,180 @@
   4 +CONFIG_ARM=y
   5 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
   6 +CONFIG_POSITION_INDEPENDENT=y
   7 +CONFIG_ARCH_MEDIATEK=y
   8 +CONFIG_TEXT_BASE=0x41e00000
   9 +CONFIG_SYS_MALLOC_F_LEN=0x4000
  10 +CONFIG_NR_DRAM_BANKS=1
  11 +CONFIG_SYS_PROMPT="MT7988> "
  12 +CONFIG_TARGET_MT7988=y
  13 +CONFIG_DEBUG_UART_BASE=0x11000000
  14 +CONFIG_DEBUG_UART_CLOCK=40000000
  15 +CONFIG_SYS_LOAD_ADDR=0x50000000
  16 +CONFIG_DEBUG_UART=y
  17 +CONFIG_SYS_CBSIZE=512
  18 +CONFIG_SYS_PBSIZE=1049
  19 +CONFIG_DEFAULT_DEVICE_TREE="mt7988a-bananapi-bpi-r4-emmc"
  20 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r4_emmc_env"
  21 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7988a-bpi-r4-emmc.dtb"
  22 +CONFIG_OF_LIBFDT_OVERLAY=y
  23 +CONFIG_OF_SYSTEM_SETUP=y
  24 +CONFIG_SMBIOS_PRODUCT_NAME=""
  25 +CONFIG_AUTOBOOT_KEYED=y
  26 +CONFIG_BOOTDELAY=30
  27 +CONFIG_AUTOBOOT_MENU_SHOW=y
  28 +CONFIG_CFB_CONSOLE_ANSI=y
  29 +CONFIG_BOARD_LATE_INIT=y
  30 +CONFIG_BUTTON=y
  31 +CONFIG_BUTTON_GPIO=y
  32 +CONFIG_GPIO_HOG=y
  33 +CONFIG_CMD_ENV_FLAGS=y
  34 +CONFIG_FIT=y
  35 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
  36 +CONFIG_LED=y
  37 +CONFIG_LED_BLINK=y
  38 +CONFIG_LED_GPIO=y
  39 +CONFIG_LOGLEVEL=7
  40 +CONFIG_LOG=y
  41 +CONFIG_CMD_BOOTMENU=y
  42 +CONFIG_CMD_BOOTP=y
  43 +CONFIG_CMD_BUTTON=y
  44 +CONFIG_CMD_CACHE=y
  45 +CONFIG_CMD_CDP=y
  46 +CONFIG_CMD_CPU=y
  47 +CONFIG_CMD_DHCP=y
  48 +CONFIG_CMD_DM=y
  49 +CONFIG_CMD_DNS=y
  50 +CONFIG_CMD_ECHO=y
  51 +CONFIG_CMD_ENV_READMEM=y
  52 +CONFIG_CMD_ERASEENV=y
  53 +CONFIG_CMD_EXT4=y
  54 +CONFIG_CMD_FAT=y
  55 +CONFIG_CMD_FDT=y
  56 +CONFIG_CMD_FS_GENERIC=y
  57 +CONFIG_CMD_FS_UUID=y
  58 +CONFIG_CMD_GPIO=y
  59 +CONFIG_CMD_GPT=y
  60 +CONFIG_CMD_HASH=y
  61 +CONFIG_CMD_ITEST=y
  62 +CONFIG_CMD_LED=y
  63 +CONFIG_CMD_LICENSE=y
  64 +CONFIG_CMD_LINK_LOCAL=y
  65 +# CONFIG_CMD_MBR is not set
  66 +CONFIG_CMD_MMC=y
  67 +CONFIG_CMD_MTD=y
  68 +CONFIG_CMD_PCI=y
  69 +CONFIG_CMD_PSTORE=y
  70 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
  71 +CONFIG_CMD_SF_TEST=y
  72 +CONFIG_CMD_PING=y
  73 +CONFIG_CMD_PXE=y
  74 +CONFIG_CMD_PWM=y
  75 +CONFIG_CMD_SMC=y
  76 +CONFIG_CMD_TFTPBOOT=y
  77 +CONFIG_CMD_TFTPSRV=y
  78 +CONFIG_CMD_UBI=y
  79 +CONFIG_CMD_UBI_RENAME=y
  80 +CONFIG_CMD_UBIFS=y
  81 +CONFIG_CMD_ASKENV=y
  82 +CONFIG_CMD_PART=y
  83 +CONFIG_CMD_RARP=y
  84 +CONFIG_CMD_SETEXPR=y
  85 +CONFIG_CMD_SLEEP=y
  86 +CONFIG_CMD_SNTP=y
  87 +CONFIG_CMD_SOURCE=y
  88 +CONFIG_CMD_STRINGS=y
  89 +CONFIG_CMD_USB=y
  90 +CONFIG_CMD_UUID=y
  91 +CONFIG_DISPLAY_CPUINFO=y
  92 +CONFIG_DM_MMC=y
  93 +CONFIG_DM_MTD=y
  94 +CONFIG_DM_REGULATOR=y
  95 +CONFIG_DM_REGULATOR_FIXED=y
  96 +CONFIG_DM_REGULATOR_GPIO=y
  97 +CONFIG_DM_USB=y
  98 +CONFIG_DM_PWM=y
  99 +CONFIG_PWM_MTK=y
 100 +CONFIG_HUSH_PARSER=y
 101 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 102 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 103 +CONFIG_VERSION_VARIABLE=y
 104 +CONFIG_PARTITION_UUIDS=y
 105 +CONFIG_NETCONSOLE=y
 106 +CONFIG_DM_GPIO=y
 107 +CONFIG_DM_SCSI=y
 108 +CONFIG_AHCI=y
 109 +CONFIG_AHCI_PCI=y
 110 +CONFIG_SCSI_AHCI=y
 111 +CONFIG_SCSI=y
 112 +CONFIG_CMD_SCSI=y
 113 +CONFIG_PHY=y
 114 +CONFIG_PHY_MTK_TPHY=y
 115 +CONFIG_MTK_AHCI=y
 116 +CONFIG_PCI=y
 117 +CONFIG_MTD=y
 118 +CONFIG_MTD_UBI_FASTMAP=y
 119 +CONFIG_DM_PCI=y
 120 +CONFIG_PCIE_MEDIATEK=y
 121 +CONFIG_PRE_CONSOLE_BUFFER=y
 122 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 123 +CONFIG_RAM=y
 124 +CONFIG_DM_SERIAL=y
 125 +CONFIG_MTK_SERIAL=y
 126 +CONFIG_MMC=y
 127 +CONFIG_MMC_DEFAULT_DEV=1
 128 +CONFIG_MMC_SUPPORTS_TUNING=y
 129 +CONFIG_SPI=y
 130 +CONFIG_DM_SPI=y
 131 +CONFIG_MTK_SPI_NAND=y
 132 +CONFIG_MTK_SPI_NAND_MTD=y
 133 +CONFIG_SYSRESET_WATCHDOG=y
 134 +CONFIG_WDT_MTK=y
 135 +CONFIG_LZO=y
 136 +CONFIG_ZSTD=y
 137 +CONFIG_HEXDUMP=y
 138 +CONFIG_RANDOM_UUID=y
 139 +CONFIG_REGEX=y
 140 +CONFIG_USB=y
 141 +CONFIG_USB_HOST=y
 142 +CONFIG_USB_XHCI_HCD=y
 143 +CONFIG_USB_XHCI_MTK=y
 144 +CONFIG_USB_STORAGE=y
 145 +CONFIG_OF_EMBED=y
 146 +CONFIG_ENV_OVERWRITE=y
 147 +CONFIG_ENV_IS_IN_MMC=y
 148 +CONFIG_ENV_OFFSET=0x400000
 149 +CONFIG_ENV_OFFSET_REDUND=0x440000
 150 +CONFIG_ENV_SIZE=0x40000
 151 +CONFIG_ENV_SIZE_REDUND=0x40000
 152 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 153 +CONFIG_NET_RANDOM_ETHADDR=y
 154 +CONFIG_REGMAP=y
 155 +CONFIG_SYSCON=y
 156 +CONFIG_CLK=y
 157 +CONFIG_SUPPORT_EMMC_BOOT=y
 158 +CONFIG_MMC_HS200_SUPPORT=y
 159 +CONFIG_MMC_MTK=y
 160 +CONFIG_PHY_FIXED=y
 161 +CONFIG_DM_ETH=y
 162 +CONFIG_MEDIATEK_ETH=y
 163 +CONFIG_PINCTRL=y
 164 +CONFIG_PINCONF=y
 165 +CONFIG_PINCTRL_MT7988=y
 166 +CONFIG_POWER_DOMAIN=y
 167 +CONFIG_MTK_POWER_DOMAIN=y
 168 +CONFIG_USE_DEFAULT_ENV_FILE=y
 169 +CONFIG_MTD_SPI_NAND=y
 170 +CONFIG_MTK_SPIM=y
 171 +#CONFIG_MTK_SNOR=y
 172 +CONFIG_DM_SPI_FLASH=y
 173 +CONFIG_SPI_FLASH_MTD=y
 174 +CONFIG_SPI_FLASH_WINBOND=y
 175 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 176 +CONFIG_CMD_SF=y
 177 +CONFIG_CMD_NAND=y
 178 +CONFIG_CMD_NAND_TRIMFFS=y
 179 +CONFIG_LMB_MAX_REGIONS=64
 180 +CONFIG_USE_IPADDR=y
 181 +CONFIG_IPADDR="192.168.1.1"
 182 +CONFIG_USE_SERVERIP=y
 183 +CONFIG_SERVERIP="192.168.1.254"
 184 --- /dev/null
 185 +++ b/configs/mt7988a_bananapi_bpi-r4-sdmmc_defconfig
 186 @@ -0,0 +1,180 @@
 187 +CONFIG_ARM=y
 188 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 189 +CONFIG_POSITION_INDEPENDENT=y
 190 +CONFIG_ARCH_MEDIATEK=y
 191 +CONFIG_TEXT_BASE=0x41e00000
 192 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 193 +CONFIG_NR_DRAM_BANKS=1
 194 +CONFIG_SYS_PROMPT="MT7988> "
 195 +CONFIG_TARGET_MT7988=y
 196 +CONFIG_DEBUG_UART_BASE=0x11000000
 197 +CONFIG_DEBUG_UART_CLOCK=40000000
 198 +CONFIG_SYS_LOAD_ADDR=0x50000000
 199 +CONFIG_DEBUG_UART=y
 200 +CONFIG_SYS_CBSIZE=512
 201 +CONFIG_SYS_PBSIZE=1049
 202 +CONFIG_DEFAULT_DEVICE_TREE="mt7988a-bananapi-bpi-r4-sd"
 203 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r4_sdmmc_env"
 204 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7988a-bpi-r4-sd.dtb"
 205 +CONFIG_OF_LIBFDT_OVERLAY=y
 206 +CONFIG_OF_SYSTEM_SETUP=y
 207 +CONFIG_SMBIOS_PRODUCT_NAME=""
 208 +CONFIG_AUTOBOOT_KEYED=y
 209 +CONFIG_BOOTDELAY=30
 210 +CONFIG_AUTOBOOT_MENU_SHOW=y
 211 +CONFIG_CFB_CONSOLE_ANSI=y
 212 +CONFIG_BOARD_LATE_INIT=y
 213 +CONFIG_BUTTON=y
 214 +CONFIG_BUTTON_GPIO=y
 215 +CONFIG_GPIO_HOG=y
 216 +CONFIG_CMD_ENV_FLAGS=y
 217 +CONFIG_FIT=y
 218 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 219 +CONFIG_LED=y
 220 +CONFIG_LED_BLINK=y
 221 +CONFIG_LED_GPIO=y
 222 +CONFIG_LOGLEVEL=7
 223 +CONFIG_LOG=y
 224 +CONFIG_CMD_BOOTMENU=y
 225 +CONFIG_CMD_BOOTP=y
 226 +CONFIG_CMD_BUTTON=y
 227 +CONFIG_CMD_CACHE=y
 228 +CONFIG_CMD_CDP=y
 229 +CONFIG_CMD_CPU=y
 230 +CONFIG_CMD_DHCP=y
 231 +CONFIG_CMD_DM=y
 232 +CONFIG_CMD_DNS=y
 233 +CONFIG_CMD_ECHO=y
 234 +CONFIG_CMD_ENV_READMEM=y
 235 +CONFIG_CMD_ERASEENV=y
 236 +CONFIG_CMD_EXT4=y
 237 +CONFIG_CMD_FAT=y
 238 +CONFIG_CMD_FDT=y
 239 +CONFIG_CMD_FS_GENERIC=y
 240 +CONFIG_CMD_FS_UUID=y
 241 +CONFIG_CMD_GPIO=y
 242 +CONFIG_CMD_GPT=y
 243 +CONFIG_CMD_HASH=y
 244 +CONFIG_CMD_ITEST=y
 245 +CONFIG_CMD_LED=y
 246 +CONFIG_CMD_LICENSE=y
 247 +CONFIG_CMD_LINK_LOCAL=y
 248 +# CONFIG_CMD_MBR is not set
 249 +CONFIG_CMD_MMC=y
 250 +CONFIG_CMD_MTD=y
 251 +CONFIG_CMD_PCI=y
 252 +CONFIG_CMD_PSTORE=y
 253 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 254 +CONFIG_CMD_SF_TEST=y
 255 +CONFIG_CMD_PING=y
 256 +CONFIG_CMD_PXE=y
 257 +CONFIG_CMD_PWM=y
 258 +CONFIG_CMD_SMC=y
 259 +CONFIG_CMD_TFTPBOOT=y
 260 +CONFIG_CMD_TFTPSRV=y
 261 +CONFIG_CMD_UBI=y
 262 +CONFIG_CMD_UBI_RENAME=y
 263 +CONFIG_CMD_UBIFS=y
 264 +CONFIG_CMD_ASKENV=y
 265 +CONFIG_CMD_PART=y
 266 +CONFIG_CMD_RARP=y
 267 +CONFIG_CMD_SETEXPR=y
 268 +CONFIG_CMD_SLEEP=y
 269 +CONFIG_CMD_SNTP=y
 270 +CONFIG_CMD_SOURCE=y
 271 +CONFIG_CMD_STRINGS=y
 272 +CONFIG_CMD_USB=y
 273 +CONFIG_CMD_UUID=y
 274 +CONFIG_DISPLAY_CPUINFO=y
 275 +CONFIG_DM_MMC=y
 276 +CONFIG_DM_MTD=y
 277 +CONFIG_DM_REGULATOR=y
 278 +CONFIG_DM_REGULATOR_FIXED=y
 279 +CONFIG_DM_REGULATOR_GPIO=y
 280 +CONFIG_DM_USB=y
 281 +CONFIG_DM_PWM=y
 282 +CONFIG_PWM_MTK=y
 283 +CONFIG_HUSH_PARSER=y
 284 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 285 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 286 +CONFIG_VERSION_VARIABLE=y
 287 +CONFIG_PARTITION_UUIDS=y
 288 +CONFIG_NETCONSOLE=y
 289 +CONFIG_DM_GPIO=y
 290 +CONFIG_DM_SCSI=y
 291 +CONFIG_AHCI=y
 292 +CONFIG_AHCI_PCI=y
 293 +CONFIG_SCSI_AHCI=y
 294 +CONFIG_SCSI=y
 295 +CONFIG_CMD_SCSI=y
 296 +CONFIG_PHY=y
 297 +CONFIG_PHY_MTK_TPHY=y
 298 +CONFIG_MTK_AHCI=y
 299 +CONFIG_PCI=y
 300 +CONFIG_MTD=y
 301 +CONFIG_MTD_UBI_FASTMAP=y
 302 +CONFIG_DM_PCI=y
 303 +CONFIG_PCIE_MEDIATEK=y
 304 +CONFIG_PRE_CONSOLE_BUFFER=y
 305 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 306 +CONFIG_RAM=y
 307 +CONFIG_DM_SERIAL=y
 308 +CONFIG_MTK_SERIAL=y
 309 +CONFIG_MMC=y
 310 +CONFIG_MMC_DEFAULT_DEV=1
 311 +CONFIG_MMC_SUPPORTS_TUNING=y
 312 +CONFIG_SPI=y
 313 +CONFIG_DM_SPI=y
 314 +CONFIG_MTK_SPI_NAND=y
 315 +CONFIG_MTK_SPI_NAND_MTD=y
 316 +CONFIG_SYSRESET_WATCHDOG=y
 317 +CONFIG_WDT_MTK=y
 318 +CONFIG_LZO=y
 319 +CONFIG_ZSTD=y
 320 +CONFIG_HEXDUMP=y
 321 +CONFIG_RANDOM_UUID=y
 322 +CONFIG_REGEX=y
 323 +CONFIG_USB=y
 324 +CONFIG_USB_HOST=y
 325 +CONFIG_USB_XHCI_HCD=y
 326 +CONFIG_USB_XHCI_MTK=y
 327 +CONFIG_USB_STORAGE=y
 328 +CONFIG_OF_EMBED=y
 329 +CONFIG_ENV_OVERWRITE=y
 330 +CONFIG_ENV_IS_IN_MMC=y
 331 +CONFIG_ENV_OFFSET=0x400000
 332 +CONFIG_ENV_OFFSET_REDUND=0x440000
 333 +CONFIG_ENV_SIZE=0x40000
 334 +CONFIG_ENV_SIZE_REDUND=0x40000
 335 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 336 +CONFIG_NET_RANDOM_ETHADDR=y
 337 +CONFIG_REGMAP=y
 338 +CONFIG_SYSCON=y
 339 +CONFIG_CLK=y
 340 +CONFIG_SUPPORT_EMMC_BOOT=y
 341 +CONFIG_MMC_HS200_SUPPORT=y
 342 +CONFIG_MMC_MTK=y
 343 +CONFIG_PHY_FIXED=y
 344 +CONFIG_DM_ETH=y
 345 +CONFIG_MEDIATEK_ETH=y
 346 +CONFIG_PINCTRL=y
 347 +CONFIG_PINCONF=y
 348 +CONFIG_PINCTRL_MT7988=y
 349 +CONFIG_POWER_DOMAIN=y
 350 +CONFIG_MTK_POWER_DOMAIN=y
 351 +CONFIG_USE_DEFAULT_ENV_FILE=y
 352 +CONFIG_MTD_SPI_NAND=y
 353 +CONFIG_MTK_SPIM=y
 354 +#CONFIG_MTK_SNOR=y
 355 +CONFIG_DM_SPI_FLASH=y
 356 +CONFIG_SPI_FLASH_MTD=y
 357 +CONFIG_SPI_FLASH_WINBOND=y
 358 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 359 +CONFIG_CMD_SF=y
 360 +CONFIG_CMD_NAND=y
 361 +CONFIG_CMD_NAND_TRIMFFS=y
 362 +CONFIG_LMB_MAX_REGIONS=64
 363 +CONFIG_USE_IPADDR=y
 364 +CONFIG_IPADDR="192.168.1.1"
 365 +CONFIG_USE_SERVERIP=y
 366 +CONFIG_SERVERIP="192.168.1.254"
 367 --- /dev/null
 368 +++ b/configs/mt7988a_bananapi_bpi-r4-snand_defconfig
 369 @@ -0,0 +1,182 @@
 370 +CONFIG_ARM=y
 371 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 372 +CONFIG_POSITION_INDEPENDENT=y
 373 +CONFIG_ARCH_MEDIATEK=y
 374 +CONFIG_TEXT_BASE=0x41e00000
 375 +CONFIG_SYS_MALLOC_F_LEN=0x4000
 376 +CONFIG_NR_DRAM_BANKS=1
 377 +CONFIG_SYS_PROMPT="MT7988> "
 378 +CONFIG_TARGET_MT7988=y
 379 +CONFIG_DEBUG_UART_BASE=0x11000000
 380 +CONFIG_DEBUG_UART_CLOCK=40000000
 381 +CONFIG_SYS_LOAD_ADDR=0x50000000
 382 +CONFIG_DEBUG_UART=y
 383 +CONFIG_SYS_CBSIZE=512
 384 +CONFIG_SYS_PBSIZE=1049
 385 +CONFIG_DEFAULT_DEVICE_TREE="mt7988a-bananapi-bpi-r4-emmc"
 386 +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r4_snand_env"
 387 +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7988a-bpi-r4-emmc.dtb"
 388 +CONFIG_OF_LIBFDT_OVERLAY=y
 389 +CONFIG_OF_SYSTEM_SETUP=y
 390 +CONFIG_SMBIOS_PRODUCT_NAME=""
 391 +CONFIG_AUTOBOOT_KEYED=y
 392 +CONFIG_BOOTDELAY=30
 393 +CONFIG_AUTOBOOT_MENU_SHOW=y
 394 +CONFIG_CFB_CONSOLE_ANSI=y
 395 +CONFIG_BOARD_LATE_INIT=y
 396 +CONFIG_BUTTON=y
 397 +CONFIG_BUTTON_GPIO=y
 398 +CONFIG_GPIO_HOG=y
 399 +CONFIG_CMD_ENV_FLAGS=y
 400 +CONFIG_FIT=y
 401 +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
 402 +CONFIG_LED=y
 403 +CONFIG_LED_BLINK=y
 404 +CONFIG_LED_GPIO=y
 405 +CONFIG_LOGLEVEL=7
 406 +CONFIG_LOG=y
 407 +CONFIG_CMD_BOOTMENU=y
 408 +CONFIG_CMD_BOOTP=y
 409 +CONFIG_CMD_BUTTON=y
 410 +CONFIG_CMD_CACHE=y
 411 +CONFIG_CMD_CDP=y
 412 +CONFIG_CMD_CPU=y
 413 +CONFIG_CMD_DHCP=y
 414 +CONFIG_CMD_DM=y
 415 +CONFIG_CMD_DNS=y
 416 +CONFIG_CMD_ECHO=y
 417 +CONFIG_CMD_ENV_READMEM=y
 418 +CONFIG_CMD_ERASEENV=y
 419 +CONFIG_CMD_EXT4=y
 420 +CONFIG_CMD_FAT=y
 421 +CONFIG_CMD_FDT=y
 422 +CONFIG_CMD_FS_GENERIC=y
 423 +CONFIG_CMD_FS_UUID=y
 424 +CONFIG_CMD_GPIO=y
 425 +CONFIG_CMD_GPT=y
 426 +CONFIG_CMD_HASH=y
 427 +CONFIG_CMD_ITEST=y
 428 +CONFIG_CMD_LED=y
 429 +CONFIG_CMD_LICENSE=y
 430 +CONFIG_CMD_LINK_LOCAL=y
 431 +# CONFIG_CMD_MBR is not set
 432 +CONFIG_CMD_MMC=y
 433 +CONFIG_CMD_MTD=y
 434 +CONFIG_CMD_PCI=y
 435 +CONFIG_CMD_PSTORE=y
 436 +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000
 437 +CONFIG_CMD_SF_TEST=y
 438 +CONFIG_CMD_PING=y
 439 +CONFIG_CMD_PXE=y
 440 +CONFIG_CMD_PWM=y
 441 +CONFIG_CMD_SMC=y
 442 +CONFIG_CMD_TFTPBOOT=y
 443 +CONFIG_CMD_TFTPSRV=y
 444 +CONFIG_CMD_UBI=y
 445 +CONFIG_CMD_UBI_RENAME=y
 446 +CONFIG_CMD_UBIFS=y
 447 +CONFIG_CMD_ASKENV=y
 448 +CONFIG_CMD_PART=y
 449 +CONFIG_CMD_RARP=y
 450 +CONFIG_CMD_SETEXPR=y
 451 +CONFIG_CMD_SLEEP=y
 452 +CONFIG_CMD_SNTP=y
 453 +CONFIG_CMD_SOURCE=y
 454 +CONFIG_CMD_STRINGS=y
 455 +CONFIG_CMD_USB=y
 456 +CONFIG_CMD_UUID=y
 457 +CONFIG_DISPLAY_CPUINFO=y
 458 +CONFIG_DM_MMC=y
 459 +CONFIG_DM_MTD=y
 460 +CONFIG_DM_REGULATOR=y
 461 +CONFIG_DM_REGULATOR_FIXED=y
 462 +CONFIG_DM_REGULATOR_GPIO=y
 463 +CONFIG_DM_USB=y
 464 +CONFIG_DM_PWM=y
 465 +CONFIG_PWM_MTK=y
 466 +CONFIG_HUSH_PARSER=y
 467 +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 468 +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 469 +CONFIG_VERSION_VARIABLE=y
 470 +CONFIG_PARTITION_UUIDS=y
 471 +CONFIG_NETCONSOLE=y
 472 +CONFIG_DM_GPIO=y
 473 +CONFIG_DM_SCSI=y
 474 +CONFIG_AHCI=y
 475 +CONFIG_AHCI_PCI=y
 476 +CONFIG_SCSI_AHCI=y
 477 +CONFIG_SCSI=y
 478 +CONFIG_CMD_SCSI=y
 479 +CONFIG_PHY=y
 480 +CONFIG_PHY_MTK_TPHY=y
 481 +CONFIG_MTK_AHCI=y
 482 +CONFIG_PCI=y
 483 +CONFIG_MTD=y
 484 +CONFIG_MTD_UBI_FASTMAP=y
 485 +CONFIG_DM_PCI=y
 486 +CONFIG_PCIE_MEDIATEK=y
 487 +CONFIG_PINCTRL_MT7988=y
 488 +CONFIG_PRE_CONSOLE_BUFFER=y
 489 +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00
 490 +CONFIG_RAM=y
 491 +CONFIG_DM_SERIAL=y
 492 +CONFIG_MTK_SERIAL=y
 493 +CONFIG_MMC=y
 494 +CONFIG_MMC_DEFAULT_DEV=1
 495 +CONFIG_MMC_SUPPORTS_TUNING=y
 496 +CONFIG_SPI=y
 497 +CONFIG_DM_SPI=y
 498 +CONFIG_MTK_SPI_NAND=y
 499 +CONFIG_MTK_SPI_NAND_MTD=y
 500 +CONFIG_SYSRESET_WATCHDOG=y
 501 +CONFIG_WDT_MTK=y
 502 +CONFIG_LZO=y
 503 +CONFIG_ZSTD=y
 504 +CONFIG_HEXDUMP=y
 505 +CONFIG_RANDOM_UUID=y
 506 +CONFIG_REGEX=y
 507 +CONFIG_USB=y
 508 +CONFIG_USB_HOST=y
 509 +CONFIG_USB_XHCI_HCD=y
 510 +CONFIG_USB_XHCI_MTK=y
 511 +CONFIG_USB_STORAGE=y
 512 +CONFIG_OF_EMBED=y
 513 +CONFIG_ENV_OVERWRITE=y
 514 +CONFIG_ENV_IS_IN_UBI=y
 515 +CONFIG_ENV_UBI_PART="ubi"
 516 +CONFIG_ENV_SIZE=0x1f000
 517 +CONFIG_ENV_SIZE_REDUND=0x1f000
 518 +CONFIG_ENV_UBI_VOLUME="ubootenv"
 519 +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2"
 520 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 521 +CONFIG_NET_RANDOM_ETHADDR=y
 522 +CONFIG_REGMAP=y
 523 +CONFIG_SYSCON=y
 524 +CONFIG_CLK=y
 525 +CONFIG_SUPPORT_EMMC_BOOT=y
 526 +CONFIG_MMC_HS200_SUPPORT=y
 527 +CONFIG_MMC_MTK=y
 528 +CONFIG_PHY_FIXED=y
 529 +CONFIG_DM_ETH=y
 530 +CONFIG_MEDIATEK_ETH=y
 531 +CONFIG_PINCTRL=y
 532 +CONFIG_PINCONF=y
 533 +CONFIG_PINCTRL_MT7988=y
 534 +CONFIG_POWER_DOMAIN=y
 535 +CONFIG_MTK_POWER_DOMAIN=y
 536 +CONFIG_USE_DEFAULT_ENV_FILE=y
 537 +CONFIG_MTD_SPI_NAND=y
 538 +CONFIG_MTK_SPIM=y
 539 +#CONFIG_MTK_SNOR=y
 540 +CONFIG_DM_SPI_FLASH=y
 541 +CONFIG_SPI_FLASH_MTD=y
 542 +CONFIG_SPI_FLASH_WINBOND=y
 543 +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
 544 +CONFIG_CMD_SF=y
 545 +CONFIG_CMD_NAND=y
 546 +CONFIG_CMD_NAND_TRIMFFS=y
 547 +CONFIG_LMB_MAX_REGIONS=64
 548 +CONFIG_USE_IPADDR=y
 549 +CONFIG_IPADDR="192.168.1.1"
 550 +CONFIG_USE_SERVERIP=y
 551 +CONFIG_SERVERIP="192.168.1.254"
 552 --- /dev/null
 553 +++ b/bananapi_bpi-r4_sdmmc_env
 554 @@ -0,0 +1,66 @@
 555 +ipaddr=192.168.1.1
 556 +serverip=192.168.1.254
 557 +loadaddr=0x50000000
 558 +bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0
 559 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
 560 +bootconf=config-mt7988a-bananapi-bpi-r4
 561 +bootconf_sd=mt7988a-bananapi-bpi-r4-sd
 562 +bootconf_emmc=mt7988a-bananapi-bpi-r4-emmc
 563 +bootconf_extra=
 564 +bootdelay=0
 565 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r4-initramfs-recovery.itb
 566 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r4-squashfs-sysupgrade.itb
 567 +bootled_pwr=green:status
 568 +bootled_rec=blue:status
 569 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 570 +bootmenu_default=0
 571 +bootmenu_delay=0
 572 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SD card]\e[0m
 573 +bootmenu_0=Initialize environment.=run _firstboot
 574 +bootmenu_0d=Run default boot command.=run boot_default
 575 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 576 +bootmenu_2=Boot production system from SD card.=run boot_production ; run bootmenu_confirm_return
 577 +bootmenu_3=Boot recovery system from SD card.=run boot_recovery ; run bootmenu_confirm_return
 578 +bootmenu_4=Load production system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 579 +bootmenu_5=Load recovery system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 580 +bootmenu_6=\e[31mInstall bootloader, recovery and production to NAND.\e[0m=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return
 581 +bootmenu_7=Reboot.=reset
 582 +bootmenu_8=Reset all settings to factory defaults.=run reset_factory ; reset
 583 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 584 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 585 +boot_production=led $bootled_pwr on ; run sdmmc_read_production && bootm $loadaddr#$bootconf#$bootconf_sd#$bootconf_extra ; led $bootled_pwr off
 586 +boot_recovery=led $bootled_rec on ; run sdmmc_read_recovery && bootm $loadaddr#$bootconf#$bootconf_emmc ; led $bootled_rec off
 587 +boot_sdmmc=run boot_production ; run boot_recovery
 588 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 589 +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run sdmmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_sd#$bootconf_extra ; fi
 590 +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run sdmmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_sd ; fi
 591 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf#$bootconf_sd
 592 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
 593 +mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
 594 +part_default=production
 595 +part_recovery=recovery
 596 +reset_factory=eraseenv && reset
 597 +sdmmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
 598 +sdmmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
 599 +sdmmc_read_snand_bl2=part start mmc 0 install part_addr && mmc read $loadaddr $part_addr 0x400
 600 +sdmmc_read_snand_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x800 && mmc read $loadaddr $offset 0x1000
 601 +sdmmc_read_emmc_install=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3800 && mmc read $loadaddr $offset 0x4000
 602 +sdmmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
 603 +sdmmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
 604 +snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr 0x0 0x80000 && mtd write bl2 $loadaddr 0x80000 0x80000 && mtd write bl2 $loadaddr 0x100000 0x80000 && mtd write bl2 $loadaddr 0x180000 0x80000
 605 +ubi_create_env=ubi create ubootenv 0x100000 dynamic 1 ; ubi create ubootenv2 0x100000 dynamic 2
 606 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi
 607 +ubi_init=run ubi_format && run ubi_init_bl && run ubi_create_env && run ubi_init_openwrt && run ubi_init_emmc_install
 608 +ubi_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run ubi_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run ubi_write_production
 609 +ubi_init_bl=run sdmmc_read_snand_bl2 && run snand_write_bl2 && run sdmmc_read_snand_fip && run ubi_write_fip
 610 +ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install
 611 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 612 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 613 +ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000
 614 +ubi_write_emmc_install=ubi check emmc_install && ubi remove emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000
 615 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
 616 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
 617 +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
 618 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 619 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 620 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 621 --- /dev/null
 622 +++ b/bananapi_bpi-r4_snand_env
 623 @@ -0,0 +1,67 @@
 624 +ipaddr=192.168.1.1
 625 +serverip=192.168.1.254
 626 +loadaddr=0x50000000
 627 +bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 ubi.block=0,fit
 628 +bootconf=config-mt7988a-bananapi-bpi-r4
 629 +bootconf_extra=mt7988a-bananapi-bpi-r4-emmc
 630 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 631 +bootdelay=0
 632 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r4-initramfs-recovery.itb
 633 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r4-snand-preloader.bin
 634 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r4-snand-bl31-uboot.fip
 635 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r4-squashfs-sysupgrade.itb
 636 +bootled_pwr=green:status
 637 +bootled_rec=blue:status
 638 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 639 +bootmenu_default=0
 640 +bootmenu_delay=0
 641 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[SPI-NAND]\e[0m
 642 +bootmenu_0=Initialize environment.=run _firstboot
 643 +bootmenu_0d=Run default boot command.=run boot_default
 644 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 645 +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return
 646 +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return
 647 +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 648 +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 649 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to NAND.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
 650 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to NAND.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 651 +bootmenu_8=\e[31mInstall bootloader, recovery and production to eMMC.\e[0m=if mmc partconf 0 ; then run emmc_init ; else echo "eMMC not detected" ; fi ; run bootmenu_confirm_return
 652 +bootmenu_9=Reboot.=reset
 653 +bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset
 654 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 655 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 656 +boot_production=led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf#$bootconf_extra ; led $bootled_pwr off
 657 +boot_recovery=led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off
 658 +boot_ubi=run boot_production ; run boot_recovery
 659 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 660 +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_extra ; fi
 661 +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi
 662 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 663 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run ubi_write_fip && run reset_factory
 664 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run snand_write_bl2
 665 +part_default=production
 666 +part_recovery=recovery
 667 +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800
 668 +snand_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr 0x0 0x80000 && mtd write bl2 $loadaddr 0x80000 0x80000 && mtd write bl2 $loadaddr 0x100000 0x80000 && mtd write bl2 $loadaddr 0x180000 0x80000
 669 +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 1 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 2
 670 +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi
 671 +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs
 672 +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery
 673 +ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install
 674 +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data
 675 +ubi_write_fip=run ubi_remove_rootfs ; ubi check fip && ubi remove fip ; ubi create fip 0x200000 static ; ubi write $loadaddr fip 0x200000
 676 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize
 677 +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize
 678 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
 679 +emmc_init=mmc dev 0 && mmc bootbus 0 0 0 0 && run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv
 680 +emmc_init_bl=run ubi_read_emmc_install && setenv fileaddr $loadaddr && run emmc_write_bl2 && setexpr fileaddr $loadaddr + 0x100000 && run emmc_write_fip && setexpr fileaddr $loadaddr + 0x500000 && run emmc_write_hdr
 681 +emmc_init_openwrt=run ubi_read_recovery && iminfo $loadaddr && run emmc_write_recovery ; run ubi_read_production && iminfo $loadaddr && run emmc_write_production
 682 +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
 683 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
 684 +emmc_write_hdr=mmc erase 0x0 0x40 && mmc write $fileaddr 0x0 0x40
 685 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
 686 +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
 687 +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv
 688 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 689 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 690 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 691 --- /dev/null
 692 +++ b/bananapi_bpi-r4_emmc_env
 693 @@ -0,0 +1,57 @@
 694 +ipaddr=192.168.1.1
 695 +serverip=192.168.1.254
 696 +loadaddr=0x50000000
 697 +bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0
 698 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
 699 +bootconf=config-mt7988a-bananapi-bpi-r4
 700 +bootconf_base=config-mt7988a-bananapi-bpi-r4
 701 +bootconf_emmc=mt7988a-bananapi-bpi-r4-emmc
 702 +bootconf_extra=
 703 +bootdelay=0
 704 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r4-initramfs-recovery.itb
 705 +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r4-emmc-preloader.bin
 706 +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r4-emmc-bl31-uboot.fip
 707 +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r4-squashfs-sysupgrade.itb
 708 +bootled_pwr=green:status
 709 +bootled_rec=blue:status
 710 +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
 711 +bootmenu_default=0
 712 +bootmenu_delay=0
 713 +bootmenu_title=      \e[0;34m( ( ( \e[1;39mOpenWrt\e[0;34m ) ) )  \e[0;36m[eMMC]\e[0m
 714 +bootmenu_0=Initialize environment.=run _firstboot
 715 +bootmenu_0d=Run default boot command.=run boot_default
 716 +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
 717 +bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
 718 +bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
 719 +bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 720 +bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
 721 +bootmenu_6=\e[31mLoad BL31+U-Boot FIP via TFTP then write to eMMC.\e[0m=run boot_tftp_write_fip ; run bootmenu_confirm_return
 722 +bootmenu_7=\e[31mLoad BL2 preloader via TFTP then write to eMMC.\e[0m=run boot_tftp_write_bl2 ; run bootmenu_confirm_return
 723 +bootmenu_8=Reboot.=reset
 724 +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset
 725 +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
 726 +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
 727 +boot_production=led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf#$bootconf_emmc#$bootconf_extra ; led $bootled_pwr off
 728 +boot_recovery=led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf#$bootconf_emmc#$bootconf_extra ; led $bootled_rec off
 729 +boot_emmc=run boot_production ; run boot_recovery
 730 +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
 731 +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_emmc#$bootconf_extra ; fi
 732 +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf#$bootconf_emmc ; fi
 733 +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip
 734 +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2
 735 +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf
 736 +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
 737 +mmc_read_vol=mmc read $loadaddr $part_addr 0x100 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
 738 +part_default=production
 739 +part_recovery=recovery
 740 +reset_factory=eraseenv && reset
 741 +emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
 742 +emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
 743 +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0
 744 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800
 745 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
 746 +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
 747 +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv
 748 +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first
 749 +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
 750 +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title       \e[33m$ver\e[0m"
 751 --- /dev/null
 752 +++ b/arch/arm/dts/mt7988a-bananapi-bpi-r4.dtsi
 753 @@ -0,0 +1,199 @@
 754 +// SPDX-License-Identifier: GPL-2.0
 755 +/*
 756 + * Copyright (c) 2022 MediaTek Inc.
 757 + * Author: Sam Shih <sam.shih@mediatek.com>
 758 + */
 759 +
 760 +/dts-v1/;
 761 +#include "mt7988.dtsi"
 762 +#include <dt-bindings/gpio/gpio.h>
 763 +#include <dt-bindings/input/linux-event-codes.h>
 764 +
 765 +/ {
 766 +       model = "Bananapi BPI-R4";
 767 +       compatible = "bananapi,bpi-r4", "mediatek,mt7988";
 768 +
 769 +       chosen {
 770 +               stdout-path = &uart0;
 771 +       };
 772 +
 773 +       memory@40000000 {
 774 +               device_type = "memory";
 775 +               reg = <0 0x40000000 0 0x10000000>;
 776 +       };
 777 +
 778 +       reg_3p3v: regulator-3p3v {
 779 +               compatible = "regulator-fixed";
 780 +               regulator-name = "fixed-3.3V";
 781 +               regulator-min-microvolt = <3300000>;
 782 +               regulator-max-microvolt = <3300000>;
 783 +               regulator-boot-on;
 784 +               regulator-always-on;
 785 +       };
 786 +
 787 +       reg_1p8v: regulator-1p8v {
 788 +               compatible = "regulator-fixed";
 789 +               regulator-name = "fixed-1.8V";
 790 +               regulator-min-microvolt = <1800000>;
 791 +               regulator-max-microvolt = <1800000>;
 792 +               regulator-boot-on;
 793 +               regulator-always-on;
 794 +       };
 795 +
 796 +       keys {
 797 +               compatible = "gpio-keys";
 798 +
 799 +               wps {
 800 +                       label = "reset";
 801 +                       linux,code = <KEY_RESTART>;
 802 +                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 803 +               };
 804 +       };
 805 +
 806 +       leds {
 807 +               compatible = "gpio-leds";
 808 +
 809 +               led_status_green: led-green {
 810 +                       label = "green:status";
 811 +                       gpios = <&gpio 79 GPIO_ACTIVE_HIGH>;
 812 +               };
 813 +
 814 +               led_status_blue: led-blue {
 815 +                       label = "blue:status";
 816 +                       gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
 817 +               };
 818 +       };
 819 +};
 820 +
 821 +&uart0 {
 822 +       status = "okay";
 823 +};
 824 +
 825 +&i2c1 {
 826 +       pinctrl-names = "default";
 827 +       pinctrl-0 = <&i2c1_pins>;
 828 +       status = "okay";
 829 +};
 830 +
 831 +&eth {
 832 +       status = "okay";
 833 +       mediatek,gmac-id = <0>;
 834 +       phy-mode = "usxgmii";
 835 +       mediatek,switch = "mt7988";
 836 +
 837 +       fixed-link {
 838 +               speed = <1000>;
 839 +               full-duplex;
 840 +               pause;
 841 +       };
 842 +};
 843 +
 844 +&pinctrl {
 845 +       i2c1_pins: i2c1-pins {
 846 +               mux {
 847 +                       function = "i2c";
 848 +                       groups = "i2c1_0";
 849 +               };
 850 +       };
 851 +
 852 +       pwm_pins: pwm-pins {
 853 +               mux {
 854 +                       function = "pwm";
 855 +                       groups = "pwm0", "pwm1", "pwm2", "pwm3", "pwm4",
 856 +                                "pwm5", "pwm6", "pwm7";
 857 +               };
 858 +       };
 859 +
 860 +       spi0_pins: spi0-pins {
 861 +               mux {
 862 +                       function = "spi";
 863 +                       groups = "spi0", "spi0_wp_hold";
 864 +               };
 865 +       };
 866 +
 867 +       mmc0_pins_default: mmc0default {
 868 +               mux {
 869 +                       function = "flash";
 870 +                       groups =  "emmc_51";
 871 +               };
 872 +
 873 +               conf-cmd-dat {
 874 +                       pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
 875 +                              "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
 876 +                              "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
 877 +                       input-enable;
 878 +               };
 879 +
 880 +               conf-clk {
 881 +                       pins = "EMMC_CK";
 882 +               };
 883 +
 884 +               conf-dsl {
 885 +                       pins = "EMMC_DSL";
 886 +               };
 887 +
 888 +               conf-rst {
 889 +                       pins = "EMMC_RSTB";
 890 +               };
 891 +       };
 892 +
 893 +       mmc1_pins_default: mmc1default {
 894 +               mux {
 895 +                       function = "flash";
 896 +                       groups =  "emmc_45";
 897 +               };
 898 +
 899 +               conf-cmd-dat {
 900 +                       pins = "SPI2_CSB", "SPI2_MISO", "SPI2_MOSI",
 901 +                              "SPI2_CLK", "SPI2_HOLD";
 902 +                       input-enable;
 903 +               };
 904 +
 905 +               conf-clk {
 906 +                       pins = "SPI2_WP";
 907 +               };
 908 +       };
 909 +};
 910 +
 911 +&pwm {
 912 +       pinctrl-names = "default";
 913 +       pinctrl-0 = <&pwm_pins>;
 914 +       status = "okay";
 915 +};
 916 +
 917 +&spi0 {
 918 +       pinctrl-names = "default";
 919 +       pinctrl-0 = <&spi0_pins>;
 920 +       #address-cells = <1>;
 921 +       #size-cells = <0>;
 922 +       status = "okay";
 923 +       must_tx;
 924 +       enhance_timing;
 925 +       dma_ext;
 926 +       ipm_design;
 927 +       support_quad;
 928 +       tick_dly = <2>;
 929 +       sample_sel = <0>;
 930 +
 931 +       spi_nand@0 {
 932 +               compatible = "spi-nand";
 933 +               reg = <0>;
 934 +               spi-max-frequency = <52000000>;
 935 +               partitions {
 936 +                       compatible = "fixed-partitions";
 937 +                       #address-cells = <1>;
 938 +                       #size-cells = <1>;
 939 +
 940 +                       partition@0 {
 941 +                               label = "bl2";
 942 +                               reg = <0x0 0x200000>;
 943 +                       };
 944 +
 945 +                       partition@200000 {
 946 +                               label = "ubi";
 947 +                               reg = <0x200000 0x7e00000>;
 948 +                               compatible = "linux,ubi";
 949 +                       };
 950 +               };
 951 +       };
 952 +};
 953 --- /dev/null
 954 +++ b/arch/arm/dts/mt7988a-bananapi-bpi-r4-sd.dts
 955 @@ -0,0 +1,19 @@
 956 +// SPDX-License-Identifier: GPL-2.0
 957 +/*
 958 + * Copyright (c) 2022 MediaTek Inc.
 959 + * Author: Sam Shih <sam.shih@mediatek.com>
 960 + */
 961 +
 962 +/dts-v1/;
 963 +#include "mt7988a-bananapi-bpi-r4.dtsi"
 964 +
 965 +&mmc0 {
 966 +       pinctrl-names = "default";
 967 +       pinctrl-0 = <&mmc1_pins_default>;
 968 +       max-frequency = <52000000>;
 969 +       bus-width = <4>;
 970 +       cap-sd-highspeed;
 971 +       vmmc-supply = <&reg_3p3v>;
 972 +       vqmmc-supply = <&reg_3p3v>;
 973 +       status = "okay";
 974 +};
 975 --- /dev/null
 976 +++ b/arch/arm/dts/mt7988a-bananapi-bpi-r4-emmc.dts
 977 @@ -0,0 +1,21 @@
 978 +// SPDX-License-Identifier: GPL-2.0
 979 +/*
 980 + * Copyright (c) 2022 MediaTek Inc.
 981 + * Author: Sam Shih <sam.shih@mediatek.com>
 982 + */
 983 +
 984 +/dts-v1/;
 985 +#include "mt7988a-bananapi-bpi-r4.dtsi"
 986 +
 987 +&mmc0 {
 988 +       pinctrl-names = "default";
 989 +       pinctrl-0 = <&mmc0_pins_default>;
 990 +       max-frequency = <52000000>;
 991 +       bus-width = <8>;
 992 +       cap-mmc-highspeed;
 993 +       cap-mmc-hw-reset;
 994 +       vmmc-supply = <&reg_3p3v>;
 995 +       vqmmc-supply = <&reg_1p8v>;
 996 +       non-removable;
 997 +       status = "okay";
 998 +};