--- /dev/null
+From c9111895fd38dadf125e07be627778a9950d8d77 Mon Sep 17 00:00:00 2001
+From: DENG Qingfang <dqfext@gmail.com>
+Date: Sun, 26 Sep 2021 00:59:24 +0200
+Subject: [PATCH 01/11] net: dsa: rtl8366rb: Support bridge offloading
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Use port isolation registers to configure bridge offloading.
+
+Tested on the D-Link DIR-685, switching between ports and
+sniffing ports to make sure no packets leak.
+
+Cc: Vladimir Oltean <olteanv@gmail.com>
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: DENG Qingfang <dqfext@gmail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/rtl8366rb.c | 86 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 86 insertions(+)
+
+--- a/drivers/net/dsa/rtl8366rb.c
++++ b/drivers/net/dsa/rtl8366rb.c
+@@ -300,6 +300,13 @@
+ #define RTL8366RB_INTERRUPT_STATUS_REG 0x0442
+ #define RTL8366RB_NUM_INTERRUPT 14 /* 0..13 */
+
++/* Port isolation registers */
++#define RTL8366RB_PORT_ISO_BASE 0x0F08
++#define RTL8366RB_PORT_ISO(pnum) (RTL8366RB_PORT_ISO_BASE + (pnum))
++#define RTL8366RB_PORT_ISO_EN BIT(0)
++#define RTL8366RB_PORT_ISO_PORTS_MASK GENMASK(7, 1)
++#define RTL8366RB_PORT_ISO_PORTS(pmask) ((pmask) << 1)
++
+ /* bits 0..5 enable force when cleared */
+ #define RTL8366RB_MAC_FORCE_CTRL_REG 0x0F11
+
+@@ -835,6 +842,21 @@ static int rtl8366rb_setup(struct dsa_sw
+ if (ret)
+ return ret;
+
++ /* Isolate all user ports so they can only send packets to itself and the CPU port */
++ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
++ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(i),
++ RTL8366RB_PORT_ISO_PORTS(BIT(RTL8366RB_PORT_NUM_CPU)) |
++ RTL8366RB_PORT_ISO_EN);
++ if (ret)
++ return ret;
++ }
++ /* CPU port can send packets to all ports */
++ ret = regmap_write(smi->map, RTL8366RB_PORT_ISO(RTL8366RB_PORT_NUM_CPU),
++ RTL8366RB_PORT_ISO_PORTS(dsa_user_ports(ds)) |
++ RTL8366RB_PORT_ISO_EN);
++ if (ret)
++ return ret;
++
+ /* Set up the "green ethernet" feature */
+ ret = rtl8366rb_jam_table(rtl8366rb_green_jam,
+ ARRAY_SIZE(rtl8366rb_green_jam), smi, false);
+@@ -1127,6 +1149,68 @@ rtl8366rb_port_disable(struct dsa_switch
+ rb8366rb_set_port_led(smi, port, false);
+ }
+
++static int
++rtl8366rb_port_bridge_join(struct dsa_switch *ds, int port,
++ struct net_device *bridge)
++{
++ struct realtek_smi *smi = ds->priv;
++ unsigned int port_bitmap = 0;
++ int ret, i;
++
++ /* Loop over all other ports than the current one */
++ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
++ /* Current port handled last */
++ if (i == port)
++ continue;
++ /* Not on this bridge */
++ if (dsa_to_port(ds, i)->bridge_dev != bridge)
++ continue;
++ /* Join this port to each other port on the bridge */
++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
++ RTL8366RB_PORT_ISO_PORTS(BIT(port)),
++ RTL8366RB_PORT_ISO_PORTS(BIT(port)));
++ if (ret)
++ dev_err(smi->dev, "failed to join port %d\n", port);
++
++ port_bitmap |= BIT(i);
++ }
++
++ /* Set the bits for the ports we can access */
++ return regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
++ RTL8366RB_PORT_ISO_PORTS(port_bitmap),
++ RTL8366RB_PORT_ISO_PORTS(port_bitmap));
++}
++
++static void
++rtl8366rb_port_bridge_leave(struct dsa_switch *ds, int port,
++ struct net_device *bridge)
++{
++ struct realtek_smi *smi = ds->priv;
++ unsigned int port_bitmap = 0;
++ int ret, i;
++
++ /* Loop over all other ports than this one */
++ for (i = 0; i < RTL8366RB_PORT_NUM_CPU; i++) {
++ /* Current port handled last */
++ if (i == port)
++ continue;
++ /* Not on this bridge */
++ if (dsa_to_port(ds, i)->bridge_dev != bridge)
++ continue;
++ /* Remove this port from any other port on the bridge */
++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(i),
++ RTL8366RB_PORT_ISO_PORTS(BIT(port)), 0);
++ if (ret)
++ dev_err(smi->dev, "failed to leave port %d\n", port);
++
++ port_bitmap |= BIT(i);
++ }
++
++ /* Clear the bits for the ports we can not access, leave ourselves */
++ regmap_update_bits(smi->map, RTL8366RB_PORT_ISO(port),
++ RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
++}
++
+ static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+ {
+ struct realtek_smi *smi = ds->priv;
+@@ -1510,6 +1594,8 @@ static const struct dsa_switch_ops rtl83
+ .get_strings = rtl8366_get_strings,
+ .get_ethtool_stats = rtl8366_get_ethtool_stats,
+ .get_sset_count = rtl8366_get_sset_count,
++ .port_bridge_join = rtl8366rb_port_bridge_join,
++ .port_bridge_leave = rtl8366rb_port_bridge_leave,
+ .port_vlan_filtering = rtl8366_vlan_filtering,
+ .port_vlan_add = rtl8366_vlan_add,
+ .port_vlan_del = rtl8366_vlan_del,
--- /dev/null
+From 96cf10a8e7297065459473c081a6fb6432a22312 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Sun, 26 Sep 2021 00:59:25 +0200
+Subject: [PATCH 02/11] net: dsa: rtl8366: Drop custom VLAN set-up
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This hacky default VLAN setup was done in order to direct
+packets to the right ports and provide port isolation, both
+which we now support properly using custom tags and proper
+bridge port isolation.
+
+We can drop the custom VLAN code and leave all VLAN handling
+alone, as users expect things to be. We can also drop
+ds->configure_vlan_while_not_filtering = false; and let
+the core deal with any VLANs it wants.
+
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Cc: DENG Qingfang <dqfext@gmail.com>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/realtek-smi-core.h | 1 -
+ drivers/net/dsa/rtl8366.c | 48 ------------------------------
+ drivers/net/dsa/rtl8366rb.c | 4 +--
+ 3 files changed, 1 insertion(+), 52 deletions(-)
+
+--- a/drivers/net/dsa/realtek-smi-core.h
++++ b/drivers/net/dsa/realtek-smi-core.h
+@@ -129,7 +129,6 @@ int rtl8366_set_pvid(struct realtek_smi
+ int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
+ int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
+ int rtl8366_reset_vlan(struct realtek_smi *smi);
+-int rtl8366_init_vlan(struct realtek_smi *smi);
+ int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack);
+ int rtl8366_vlan_add(struct dsa_switch *ds, int port,
+--- a/drivers/net/dsa/rtl8366.c
++++ b/drivers/net/dsa/rtl8366.c
+@@ -292,54 +292,6 @@ int rtl8366_reset_vlan(struct realtek_sm
+ }
+ EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
+
+-int rtl8366_init_vlan(struct realtek_smi *smi)
+-{
+- int port;
+- int ret;
+-
+- ret = rtl8366_reset_vlan(smi);
+- if (ret)
+- return ret;
+-
+- /* Loop over the available ports, for each port, associate
+- * it with the VLAN (port+1)
+- */
+- for (port = 0; port < smi->num_ports; port++) {
+- u32 mask;
+-
+- if (port == smi->cpu_port)
+- /* For the CPU port, make all ports members of this
+- * VLAN.
+- */
+- mask = GENMASK((int)smi->num_ports - 1, 0);
+- else
+- /* For all other ports, enable itself plus the
+- * CPU port.
+- */
+- mask = BIT(port) | BIT(smi->cpu_port);
+-
+- /* For each port, set the port as member of VLAN (port+1)
+- * and untagged, except for the CPU port: the CPU port (5) is
+- * member of VLAN 6 and so are ALL the other ports as well.
+- * Use filter 0 (no filter).
+- */
+- dev_info(smi->dev, "VLAN%d port mask for port %d, %08x\n",
+- (port + 1), port, mask);
+- ret = rtl8366_set_vlan(smi, (port + 1), mask, mask, 0);
+- if (ret)
+- return ret;
+-
+- dev_info(smi->dev, "VLAN%d port %d, PVID set to %d\n",
+- (port + 1), port, (port + 1));
+- ret = rtl8366_set_pvid(smi, port, (port + 1));
+- if (ret)
+- return ret;
+- }
+-
+- return rtl8366_enable_vlan(smi, true);
+-}
+-EXPORT_SYMBOL_GPL(rtl8366_init_vlan);
+-
+ int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+ struct netlink_ext_ack *extack)
+ {
+--- a/drivers/net/dsa/rtl8366rb.c
++++ b/drivers/net/dsa/rtl8366rb.c
+@@ -985,7 +985,7 @@ static int rtl8366rb_setup(struct dsa_sw
+ return ret;
+ }
+
+- ret = rtl8366_init_vlan(smi);
++ ret = rtl8366_reset_vlan(smi);
+ if (ret)
+ return ret;
+
+@@ -999,8 +999,6 @@ static int rtl8366rb_setup(struct dsa_sw
+ return -ENODEV;
+ }
+
+- ds->configure_vlan_while_not_filtering = false;
+-
+ return 0;
+ }
+
--- /dev/null
+From 7028f54b620f8df344b18e46e4a78e266091ab45 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Sun, 26 Sep 2021 00:59:26 +0200
+Subject: [PATCH 03/11] net: dsa: rtl8366rb: Rewrite weird VLAN filering
+ enablement
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+While we were defining one VLAN per port for isolating the ports
+the port_vlan_filtering() callback was implemented to enable a
+VLAN on the port + 1. This function makes no sense, not only is
+it incomplete as it only enables the VLAN, it doesn't do what
+the callback is supposed to do, which is to selectively enable
+and disable filtering on a certain port.
+
+Implement the correct callback: we have two registers dealing
+with filtering on the RTL9366RB, so we implement an ASIC-specific
+callback and implement filering using the register bit that makes
+the switch drop frames if the port is not in the VLAN member set.
+
+The DSA documentation Documentation/networking/switchdev.rst states:
+
+ When the bridge has VLAN filtering enabled and a PVID is not
+ configured on the ingress port, untagged and 802.1p tagged
+ packets must be dropped. When the bridge has VLAN filtering
+ enabled and a PVID exists on the ingress port, untagged and
+ priority-tagged packets must be accepted and forwarded according
+ to the bridge's port membership of the PVID VLAN. When the
+ bridge has VLAN filtering disabled, the presence/lack of a
+ PVID should not influence the packet forwarding decision.
+
+To comply with this, we add two arrays of bool in the RTL8366RB
+state that keeps track of if filtering and PVID is enabled or
+not for each port. We then add code such that whenever filtering
+or PVID changes, we update the filter according to the
+specification.
+
+Cc: Vladimir Oltean <olteanv@gmail.com>
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
+Cc: Florian Fainelli <f.fainelli@gmail.com>
+Cc: DENG Qingfang <dqfext@gmail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/realtek-smi-core.h | 2 -
+ drivers/net/dsa/rtl8366.c | 35 ----------
+ drivers/net/dsa/rtl8366rb.c | 102 +++++++++++++++++++++++++++--
+ 3 files changed, 95 insertions(+), 44 deletions(-)
+
+--- a/drivers/net/dsa/realtek-smi-core.h
++++ b/drivers/net/dsa/realtek-smi-core.h
+@@ -129,8 +129,6 @@ int rtl8366_set_pvid(struct realtek_smi
+ int rtl8366_enable_vlan4k(struct realtek_smi *smi, bool enable);
+ int rtl8366_enable_vlan(struct realtek_smi *smi, bool enable);
+ int rtl8366_reset_vlan(struct realtek_smi *smi);
+-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+- struct netlink_ext_ack *extack);
+ int rtl8366_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack);
+--- a/drivers/net/dsa/rtl8366.c
++++ b/drivers/net/dsa/rtl8366.c
+@@ -292,41 +292,6 @@ int rtl8366_reset_vlan(struct realtek_sm
+ }
+ EXPORT_SYMBOL_GPL(rtl8366_reset_vlan);
+
+-int rtl8366_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
+- struct netlink_ext_ack *extack)
+-{
+- struct realtek_smi *smi = ds->priv;
+- struct rtl8366_vlan_4k vlan4k;
+- int ret;
+-
+- /* Use VLAN nr port + 1 since VLAN0 is not valid */
+- if (!smi->ops->is_vlan_valid(smi, port + 1))
+- return -EINVAL;
+-
+- dev_info(smi->dev, "%s filtering on port %d\n",
+- vlan_filtering ? "enable" : "disable",
+- port);
+-
+- /* TODO:
+- * The hardware support filter ID (FID) 0..7, I have no clue how to
+- * support this in the driver when the callback only says on/off.
+- */
+- ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k);
+- if (ret)
+- return ret;
+-
+- /* Just set the filter to FID 1 for now then */
+- ret = rtl8366_set_vlan(smi, port + 1,
+- vlan4k.member,
+- vlan4k.untag,
+- 1);
+- if (ret)
+- return ret;
+-
+- return 0;
+-}
+-EXPORT_SYMBOL_GPL(rtl8366_vlan_filtering);
+-
+ int rtl8366_vlan_add(struct dsa_switch *ds, int port,
+ const struct switchdev_obj_port_vlan *vlan,
+ struct netlink_ext_ack *extack)
+--- a/drivers/net/dsa/rtl8366rb.c
++++ b/drivers/net/dsa/rtl8366rb.c
+@@ -143,6 +143,21 @@
+ #define RTL8366RB_PHY_NO_OFFSET 9
+ #define RTL8366RB_PHY_NO_MASK (0x1f << 9)
+
++/* VLAN Ingress Control Register 1, one bit per port.
++ * bit 0 .. 5 will make the switch drop ingress frames without
++ * VID such as untagged or priority-tagged frames for respective
++ * port.
++ * bit 6 .. 11 will make the switch drop ingress frames carrying
++ * a C-tag with VID != 0 for respective port.
++ */
++#define RTL8366RB_VLAN_INGRESS_CTRL1_REG 0x037E
++#define RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) (BIT((port)) | BIT((port) + 6))
++
++/* VLAN Ingress Control Register 2, one bit per port.
++ * bit0 .. bit5 will make the switch drop all ingress frames with
++ * a VLAN classification that does not include the port is in its
++ * member set.
++ */
+ #define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
+
+ /* LED control registers */
+@@ -321,9 +336,13 @@
+ /**
+ * struct rtl8366rb - RTL8366RB-specific data
+ * @max_mtu: per-port max MTU setting
++ * @pvid_enabled: if PVID is set for respective port
++ * @vlan_filtering: if VLAN filtering is enabled for respective port
+ */
+ struct rtl8366rb {
+ unsigned int max_mtu[RTL8366RB_NUM_PORTS];
++ bool pvid_enabled[RTL8366RB_NUM_PORTS];
++ bool vlan_filtering[RTL8366RB_NUM_PORTS];
+ };
+
+ static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
+@@ -933,11 +952,13 @@ static int rtl8366rb_setup(struct dsa_sw
+ if (ret)
+ return ret;
+
+- /* Discard VLAN tagged packets if the port is not a member of
+- * the VLAN with which the packets is associated.
+- */
++ /* Accept all packets by default, we enable filtering on-demand */
++ ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
++ 0);
++ if (ret)
++ return ret;
+ ret = regmap_write(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
+- RTL8366RB_PORT_ALL);
++ 0);
+ if (ret)
+ return ret;
+
+@@ -1209,6 +1230,53 @@ rtl8366rb_port_bridge_leave(struct dsa_s
+ RTL8366RB_PORT_ISO_PORTS(port_bitmap), 0);
+ }
+
++/**
++ * rtl8366rb_drop_untagged() - make the switch drop untagged and C-tagged frames
++ * @smi: SMI state container
++ * @port: the port to drop untagged and C-tagged frames on
++ * @drop: whether to drop or pass untagged and C-tagged frames
++ */
++static int rtl8366rb_drop_untagged(struct realtek_smi *smi, int port, bool drop)
++{
++ return regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL1_REG,
++ RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port),
++ drop ? RTL8366RB_VLAN_INGRESS_CTRL1_DROP(port) : 0);
++}
++
++static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
++ bool vlan_filtering,
++ struct netlink_ext_ack *extack)
++{
++ struct realtek_smi *smi = ds->priv;
++ struct rtl8366rb *rb;
++ int ret;
++
++ rb = smi->chip_data;
++
++ dev_dbg(smi->dev, "port %d: %s VLAN filtering\n", port,
++ vlan_filtering ? "enable" : "disable");
++
++ /* If the port is not in the member set, the frame will be dropped */
++ ret = regmap_update_bits(smi->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
++ BIT(port), vlan_filtering ? BIT(port) : 0);
++ if (ret)
++ return ret;
++
++ /* Keep track if filtering is enabled on each port */
++ rb->vlan_filtering[port] = vlan_filtering;
++
++ /* If VLAN filtering is enabled and PVID is also enabled, we must
++ * not drop any untagged or C-tagged frames. If we turn off VLAN
++ * filtering on a port, we need ti accept any frames.
++ */
++ if (vlan_filtering)
++ ret = rtl8366rb_drop_untagged(smi, port, !rb->pvid_enabled[port]);
++ else
++ ret = rtl8366rb_drop_untagged(smi, port, false);
++
++ return ret;
++}
++
+ static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+ {
+ struct realtek_smi *smi = ds->priv;
+@@ -1420,14 +1488,34 @@ static int rtl8366rb_get_mc_index(struct
+
+ static int rtl8366rb_set_mc_index(struct realtek_smi *smi, int port, int index)
+ {
++ struct rtl8366rb *rb;
++ bool pvid_enabled;
++ int ret;
++
++ rb = smi->chip_data;
++ pvid_enabled = !!index;
++
+ if (port >= smi->num_ports || index >= RTL8366RB_NUM_VLANS)
+ return -EINVAL;
+
+- return regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_VLAN_CTRL_REG(port),
+ RTL8366RB_PORT_VLAN_CTRL_MASK <<
+ RTL8366RB_PORT_VLAN_CTRL_SHIFT(port),
+ (index & RTL8366RB_PORT_VLAN_CTRL_MASK) <<
+ RTL8366RB_PORT_VLAN_CTRL_SHIFT(port));
++ if (ret)
++ return ret;
++
++ rb->pvid_enabled[port] = pvid_enabled;
++
++ /* If VLAN filtering is enabled and PVID is also enabled, we must
++ * not drop any untagged or C-tagged frames. Make sure to update the
++ * filtering setting.
++ */
++ if (rb->vlan_filtering[port])
++ ret = rtl8366rb_drop_untagged(smi, port, !pvid_enabled);
++
++ return ret;
+ }
+
+ static bool rtl8366rb_is_vlan_valid(struct realtek_smi *smi, unsigned int vlan)
+@@ -1437,7 +1525,7 @@ static bool rtl8366rb_is_vlan_valid(stru
+ if (smi->vlan4k_enabled)
+ max = RTL8366RB_NUM_VIDS - 1;
+
+- if (vlan == 0 || vlan > max)
++ if (vlan > max)
+ return false;
+
+ return true;
+@@ -1594,7 +1682,7 @@ static const struct dsa_switch_ops rtl83
+ .get_sset_count = rtl8366_get_sset_count,
+ .port_bridge_join = rtl8366rb_port_bridge_join,
+ .port_bridge_leave = rtl8366rb_port_bridge_leave,
+- .port_vlan_filtering = rtl8366_vlan_filtering,
++ .port_vlan_filtering = rtl8366rb_vlan_filtering,
+ .port_vlan_add = rtl8366_vlan_add,
+ .port_vlan_del = rtl8366_vlan_del,
+ .port_enable = rtl8366rb_port_enable,
--- /dev/null
+From ddb59a5dc42714999c335dab4bf256125ba3120c Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Sun, 26 Sep 2021 00:59:29 +0200
+Subject: [PATCH 06/11] net: dsa: rtl8366: Drop and depromote pointless prints
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+We don't need a message for every VLAN association, dbg
+is fine. The message about adding the DSA or CPU
+port to a VLAN is directly misleading, this is perfectly
+fine.
+
+Cc: Vladimir Oltean <olteanv@gmail.com>
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Cc: DENG Qingfang <dqfext@gmail.com>
+Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
+Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/rtl8366.c | 11 ++++-------
+ 1 file changed, 4 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/dsa/rtl8366.c
++++ b/drivers/net/dsa/rtl8366.c
+@@ -318,12 +318,9 @@ int rtl8366_vlan_add(struct dsa_switch *
+ return ret;
+ }
+
+- dev_info(smi->dev, "add VLAN %d on port %d, %s, %s\n",
+- vlan->vid, port, untagged ? "untagged" : "tagged",
+- pvid ? " PVID" : "no PVID");
+-
+- if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))
+- dev_err(smi->dev, "port is DSA or CPU port\n");
++ dev_dbg(smi->dev, "add VLAN %d on port %d, %s, %s\n",
++ vlan->vid, port, untagged ? "untagged" : "tagged",
++ pvid ? "PVID" : "no PVID");
+
+ member |= BIT(port);
+
+@@ -356,7 +353,7 @@ int rtl8366_vlan_del(struct dsa_switch *
+ struct realtek_smi *smi = ds->priv;
+ int ret, i;
+
+- dev_info(smi->dev, "del VLAN %04x on port %d\n", vlan->vid, port);
++ dev_dbg(smi->dev, "del VLAN %d on port %d\n", vlan->vid, port);
+
+ for (i = 0; i < smi->num_vlan_mc; i++) {
+ struct rtl8366_vlan_mc vlanmc;
--- /dev/null
+From 5c9b66f3c8a3f72fa2a58e89a57c6d7afd550bf0 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Wed, 29 Sep 2021 13:23:22 +0200
+Subject: [PATCH 07/11] net: dsa: rtl8366rb: Use core filtering tracking
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+We added a state variable to track whether a certain port
+was VLAN filtering or not, but we can just inquire the DSA
+core about this.
+
+Cc: Vladimir Oltean <olteanv@gmail.com>
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Cc: DENG Qingfang <dqfext@gmail.com>
+Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
+Cc: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/rtl8366rb.c | 9 ++-------
+ 1 file changed, 2 insertions(+), 7 deletions(-)
+
+--- a/drivers/net/dsa/rtl8366rb.c
++++ b/drivers/net/dsa/rtl8366rb.c
+@@ -337,12 +337,10 @@
+ * struct rtl8366rb - RTL8366RB-specific data
+ * @max_mtu: per-port max MTU setting
+ * @pvid_enabled: if PVID is set for respective port
+- * @vlan_filtering: if VLAN filtering is enabled for respective port
+ */
+ struct rtl8366rb {
+ unsigned int max_mtu[RTL8366RB_NUM_PORTS];
+ bool pvid_enabled[RTL8366RB_NUM_PORTS];
+- bool vlan_filtering[RTL8366RB_NUM_PORTS];
+ };
+
+ static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
+@@ -1262,12 +1260,9 @@ static int rtl8366rb_vlan_filtering(stru
+ if (ret)
+ return ret;
+
+- /* Keep track if filtering is enabled on each port */
+- rb->vlan_filtering[port] = vlan_filtering;
+-
+ /* If VLAN filtering is enabled and PVID is also enabled, we must
+ * not drop any untagged or C-tagged frames. If we turn off VLAN
+- * filtering on a port, we need ti accept any frames.
++ * filtering on a port, we need to accept any frames.
+ */
+ if (vlan_filtering)
+ ret = rtl8366rb_drop_untagged(smi, port, !rb->pvid_enabled[port]);
+@@ -1512,7 +1507,7 @@ static int rtl8366rb_set_mc_index(struct
+ * not drop any untagged or C-tagged frames. Make sure to update the
+ * filtering setting.
+ */
+- if (rb->vlan_filtering[port])
++ if (dsa_port_is_vlan_filtering(dsa_to_port(smi->ds, port)))
+ ret = rtl8366rb_drop_untagged(smi, port, !pvid_enabled);
+
+ return ret;
--- /dev/null
+From 831a3d26bea0d14f8563eecf96def660a74a3000 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Tue, 5 Oct 2021 21:47:02 +0200
+Subject: [PATCH 08/11] net: dsa: rtl8366rb: Support disabling learning
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+The RTL8366RB hardware supports disabling learning per-port
+so let's make use of this feature. Rename some unfortunately
+named registers in the process.
+
+Suggested-by: Vladimir Oltean <olteanv@gmail.com>
+Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Cc: Florian Fainelli <f.fainelli@gmail.com>
+Cc: DENG Qingfang <dqfext@gmail.com>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/rtl8366rb.c | 50 ++++++++++++++++++++++++++++++++-----
+ 1 file changed, 44 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/dsa/rtl8366rb.c
++++ b/drivers/net/dsa/rtl8366rb.c
+@@ -14,6 +14,7 @@
+
+ #include <linux/bitops.h>
+ #include <linux/etherdevice.h>
++#include <linux/if_bridge.h>
+ #include <linux/interrupt.h>
+ #include <linux/irqdomain.h>
+ #include <linux/irqchip/chained_irq.h>
+@@ -42,9 +43,12 @@
+ /* Port Enable Control register */
+ #define RTL8366RB_PECR 0x0001
+
+-/* Switch Security Control registers */
+-#define RTL8366RB_SSCR0 0x0002
+-#define RTL8366RB_SSCR1 0x0003
++/* Switch per-port learning disablement register */
++#define RTL8366RB_PORT_LEARNDIS_CTRL 0x0002
++
++/* Security control, actually aging register */
++#define RTL8366RB_SECURITY_CTRL 0x0003
++
+ #define RTL8366RB_SSCR2 0x0004
+ #define RTL8366RB_SSCR2_DROP_UNKNOWN_DA BIT(0)
+
+@@ -927,13 +931,14 @@ static int rtl8366rb_setup(struct dsa_sw
+ /* layer 2 size, see rtl8366rb_change_mtu() */
+ rb->max_mtu[i] = 1532;
+
+- /* Enable learning for all ports */
+- ret = regmap_write(smi->map, RTL8366RB_SSCR0, 0);
++ /* Disable learning for all ports */
++ ret = regmap_write(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL,
++ RTL8366RB_PORT_ALL);
+ if (ret)
+ return ret;
+
+ /* Enable auto ageing for all ports */
+- ret = regmap_write(smi->map, RTL8366RB_SSCR1, 0);
++ ret = regmap_write(smi->map, RTL8366RB_SECURITY_CTRL, 0);
+ if (ret)
+ return ret;
+
+@@ -1272,6 +1277,37 @@ static int rtl8366rb_vlan_filtering(stru
+ return ret;
+ }
+
++static int
++rtl8366rb_port_pre_bridge_flags(struct dsa_switch *ds, int port,
++ struct switchdev_brport_flags flags,
++ struct netlink_ext_ack *extack)
++{
++ /* We support enabling/disabling learning */
++ if (flags.mask & ~(BR_LEARNING))
++ return -EINVAL;
++
++ return 0;
++}
++
++static int
++rtl8366rb_port_bridge_flags(struct dsa_switch *ds, int port,
++ struct switchdev_brport_flags flags,
++ struct netlink_ext_ack *extack)
++{
++ struct realtek_smi *smi = ds->priv;
++ int ret;
++
++ if (flags.mask & BR_LEARNING) {
++ ret = regmap_update_bits(smi->map, RTL8366RB_PORT_LEARNDIS_CTRL,
++ BIT(port),
++ (flags.val & BR_LEARNING) ? 0 : BIT(port));
++ if (ret)
++ return ret;
++ }
++
++ return 0;
++}
++
+ static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+ {
+ struct realtek_smi *smi = ds->priv;
+@@ -1682,6 +1718,8 @@ static const struct dsa_switch_ops rtl83
+ .port_vlan_del = rtl8366_vlan_del,
+ .port_enable = rtl8366rb_port_enable,
+ .port_disable = rtl8366rb_port_disable,
++ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
++ .port_bridge_flags = rtl8366rb_port_bridge_flags,
+ .port_change_mtu = rtl8366rb_change_mtu,
+ .port_max_mtu = rtl8366rb_max_mtu,
+ };
--- /dev/null
+From 8eb13420eb9ab4a4e2ebd612bf5dc9dba0039236 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Tue, 5 Oct 2021 21:47:03 +0200
+Subject: [PATCH 09/11] net: dsa: rtl8366rb: Support fast aging
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This implements fast aging per-port using the special "security"
+register, which will flush any learned L2 LUT entries on a port.
+
+The vendor API just enabled setting and clearing this bit, so
+we set it to age out any entries on the port and then we clear
+it again.
+
+Suggested-by: Vladimir Oltean <olteanv@gmail.com>
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Cc: DENG Qingfang <dqfext@gmail.com>
+Cc: Florian Fainelli <f.fainelli@gmail.com>
+Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/rtl8366rb.c | 14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+--- a/drivers/net/dsa/rtl8366rb.c
++++ b/drivers/net/dsa/rtl8366rb.c
+@@ -1308,6 +1308,19 @@ rtl8366rb_port_bridge_flags(struct dsa_s
+ return 0;
+ }
+
++static void
++rtl8366rb_port_fast_age(struct dsa_switch *ds, int port)
++{
++ struct realtek_smi *smi = ds->priv;
++
++ /* This will age out any learned L2 entries */
++ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL,
++ BIT(port), BIT(port));
++ /* Restore the normal state of things */
++ regmap_update_bits(smi->map, RTL8366RB_SECURITY_CTRL,
++ BIT(port), 0);
++}
++
+ static int rtl8366rb_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
+ {
+ struct realtek_smi *smi = ds->priv;
+@@ -1720,6 +1733,7 @@ static const struct dsa_switch_ops rtl83
+ .port_disable = rtl8366rb_port_disable,
+ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
+ .port_bridge_flags = rtl8366rb_port_bridge_flags,
++ .port_fast_age = rtl8366rb_port_fast_age,
+ .port_change_mtu = rtl8366rb_change_mtu,
+ .port_max_mtu = rtl8366rb_max_mtu,
+ };
--- /dev/null
+From 90c855471a89d3e05ecf5b6464bd04abf2c83b70 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Tue, 5 Oct 2021 21:47:04 +0200
+Subject: [PATCH 10/11] net: dsa: rtl8366rb: Support setting STP state
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This adds support for setting the STP state to the RTL8366RB
+DSA switch. This rids the following message from the kernel on
+e.g. OpenWrt:
+
+DSA: failed to set STP state 3 (-95)
+
+Since the RTL8366RB has one STP state register per FID with
+two bit per port in each, we simply loop over all the FIDs
+and set the state on all of them.
+
+Cc: Vladimir Oltean <olteanv@gmail.com>
+Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
+Cc: Mauri Sandberg <sandberg@mailfence.com>
+Cc: DENG Qingfang <dqfext@gmail.com>
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
+Signed-off-by: David S. Miller <davem@davemloft.net>
+---
+ drivers/net/dsa/rtl8366rb.c | 48 +++++++++++++++++++++++++++++++++++++
+ 1 file changed, 48 insertions(+)
+
+--- a/drivers/net/dsa/rtl8366rb.c
++++ b/drivers/net/dsa/rtl8366rb.c
+@@ -110,6 +110,18 @@
+
+ #define RTL8366RB_POWER_SAVING_REG 0x0021
+
++/* Spanning tree status (STP) control, two bits per port per FID */
++#define RTL8366RB_STP_STATE_BASE 0x0050 /* 0x0050..0x0057 */
++#define RTL8366RB_STP_STATE_DISABLED 0x0
++#define RTL8366RB_STP_STATE_BLOCKING 0x1
++#define RTL8366RB_STP_STATE_LEARNING 0x2
++#define RTL8366RB_STP_STATE_FORWARDING 0x3
++#define RTL8366RB_STP_MASK GENMASK(1, 0)
++#define RTL8366RB_STP_STATE(port, state) \
++ ((state) << ((port) * 2))
++#define RTL8366RB_STP_STATE_MASK(port) \
++ RTL8366RB_STP_STATE((port), RTL8366RB_STP_MASK)
++
+ /* CPU port control reg */
+ #define RTL8368RB_CPU_CTRL_REG 0x0061
+ #define RTL8368RB_CPU_PORTS_MSK 0x00FF
+@@ -234,6 +246,7 @@
+ #define RTL8366RB_NUM_LEDGROUPS 4
+ #define RTL8366RB_NUM_VIDS 4096
+ #define RTL8366RB_PRIORITYMAX 7
++#define RTL8366RB_NUM_FIDS 8
+ #define RTL8366RB_FIDMAX 7
+
+ #define RTL8366RB_PORT_1 BIT(0) /* In userspace port 0 */
+@@ -1309,6 +1322,40 @@ rtl8366rb_port_bridge_flags(struct dsa_s
+ }
+
+ static void
++rtl8366rb_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
++{
++ struct realtek_smi *smi = ds->priv;
++ u32 val;
++ int i;
++
++ switch (state) {
++ case BR_STATE_DISABLED:
++ val = RTL8366RB_STP_STATE_DISABLED;
++ break;
++ case BR_STATE_BLOCKING:
++ case BR_STATE_LISTENING:
++ val = RTL8366RB_STP_STATE_BLOCKING;
++ break;
++ case BR_STATE_LEARNING:
++ val = RTL8366RB_STP_STATE_LEARNING;
++ break;
++ case BR_STATE_FORWARDING:
++ val = RTL8366RB_STP_STATE_FORWARDING;
++ break;
++ default:
++ dev_err(smi->dev, "unknown bridge state requested\n");
++ return;
++ };
++
++ /* Set the same status for the port on all the FIDs */
++ for (i = 0; i < RTL8366RB_NUM_FIDS; i++) {
++ regmap_update_bits(smi->map, RTL8366RB_STP_STATE_BASE + i,
++ RTL8366RB_STP_STATE_MASK(port),
++ RTL8366RB_STP_STATE(port, val));
++ }
++}
++
++static void
+ rtl8366rb_port_fast_age(struct dsa_switch *ds, int port)
+ {
+ struct realtek_smi *smi = ds->priv;
+@@ -1733,6 +1780,7 @@ static const struct dsa_switch_ops rtl83
+ .port_disable = rtl8366rb_port_disable,
+ .port_pre_bridge_flags = rtl8366rb_port_pre_bridge_flags,
+ .port_bridge_flags = rtl8366rb_port_bridge_flags,
++ .port_stp_state_set = rtl8366rb_port_stp_state_set,
+ .port_fast_age = rtl8366rb_port_fast_age,
+ .port_change_mtu = rtl8366rb_change_mtu,
+ .port_max_mtu = rtl8366rb_max_mtu,
projects / openwrt / staging / mkresin.git / commitdiff