3 #include <dt-bindings/input/input.h>
7 bootargs = "console=ttyLTQ0,115200";
12 led-failsafe = &power;
17 led-internet = &online;
23 device_type = "memory";
24 reg = <0x0 0x4000000>;
28 compatible = "ath5k,eeprom";
29 ath,eep-flash = <&boardconfig 0x400>;
30 ath,mac-offset = <0x16>;
31 ath,mac-increment = <1>;
36 compatible = "gpio-keys-polled";
39 poll-interval = <100>;
43 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
44 linux,code = <KEY_RFKILL>;
48 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
49 linux,code = <KEY_RESTART>;
54 compatible = "gpio-leds";
57 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
58 default-state = "keep";
62 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
66 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
70 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
74 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
78 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
82 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
86 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
90 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
94 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
98 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
102 usb_vbus: regulator-usb-vbus {
103 compatible = "regulator-fixed";
105 regulator-name = "USB_VBUS";
107 regulator-min-microvolt = <5000000>;
108 regulator-max-microvolt = <5000000>;
110 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
116 pinctrl-names = "default";
117 pinctrl-0 = <&state_default>;
119 state_default: pinmux {
121 lantiq,groups = "ebu cs1";
122 lantiq,function = "ebu";
125 lantiq,groups = "req1", "req2";
126 lantiq,function = "pci";
127 lantiq,open-drain = <1>;
132 lantiq,groups = "gnt1", "gnt2";
133 lantiq,function = "pci";
142 lantiq,shadow = <0x0>;
147 mtd-mac-address = <&boardconfig 0x16>;
152 compatible = "lantiq,nor";
154 reg = <0 0x0 0x2000000>;
155 #address-cells = <1>;
159 compatible = "fixed-partitions";
160 #address-cells = <1>;
165 reg = <0x00000 0x10000>; /* 64 KB */
171 reg = <0x10000 0x10000>; /* 64 KB */
177 reg = <0x20000 0x3d0000>;
180 boardconfig: partition@400000 {
181 label = "boardconfig";
182 reg = <0x3f0000 0x10000>;
191 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
201 vbus-supply = <&usb_vbus>;
206 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;