target/linux/lantiq/dts/ARV7506PW11.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 / {
   6         model = "ARV7506PW11 - Alice/O2 IAD 4421";
   7
   8         aliases {
   9                 led-boot = &power;
  10                 led-failsafe = &power_red;
  11                 led-running = &power;
  12
  13                 led-dsl = &dsl;
  14                 led-internet = &internet;
  15                 led-wifi = &wlan;
  16         };
  17
  18         memory@0 {
  19                 reg = <0x0 0x4000000>;
  20         };
  21
  22         fpi@10000000 {
  23                 localbus@0 {
  24                         nor-boot@0 {
  25                                 compatible = "lantiq,nor";
  26                                 bank-width = <2>;
  27                                 reg = <0 0x0 0x800000>;
  28
  29                                 partitions {
  30                                         compatible = "fixed-partitions";
  31                                         #address-cells = <1>;
  32                                         #size-cells = <1>;
  33
  34                                         partition@0 {
  35                                                 label = "uboot";
  36                                                 reg = <0x00000 0x40000>;
  37                                                 read-only;
  38                                         };
  39
  40                                         partition@40000 {
  41                                                 label = "uboot_env";
  42                                                 reg = <0x40000 0x10000>;
  43                                                 read-only;
  44                                         };
  45
  46                                         partition@50000 {
  47                                                 label = "firmware";
  48                                                 reg = <0x50000 0x7a0000>;
  49                                         };
  50
  51                                         boardconfig: partition@7f0000 {
  52                                                 label = "board_config";
  53                                                 reg = <0x7f0000 0x10000>;
  54                                                 read-only;
  55                                         };
  56                                 };
  57                         };
  58                 };
  59
  60                 gpio: pinmux@E100B10 {
  61                         pinctrl-names = "default";
  62                         pinctrl-0 = <&state_default>;
  63
  64                         state_default: pinmux {
  65                                 pci {
  66                                         lantiq,groups = "gnt1";
  67                                         lantiq,function = "pci";
  68                                         lantiq,output = <1>;
  69                                 };
  70                                 pci_rst {
  71                                         lantiq,pins = "io21";
  72                                         lantiq,pull = <2>;
  73                                         lantiq,output = <1>;
  74                                 };
  75                         };
  76                 };
  77
  78                 /* GPIO 19: switch reset */
  79                 etop@E180000 {
  80                         phy-mode = "rmii";
  81                         mtd-mac-address = <&boardconfig 0x16>;
  82                 };
  83
  84                 pci@E105400 {
  85                         status = "okay";
  86                         lantiq,external-clock;
  87                         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
  88                 };
  89         };
  90
  91         ralink_eep {
  92                 compatible = "ralink,eeprom";
  93                 ralink,eeprom = "RT2860.eeprom";
  94         };
  95
  96         gpio-keys-polled {
  97                 compatible = "gpio-keys-polled";
  98                 #address-cells = <1>;
  99                 #size-cells = <0>;
 100                 poll-interval = <100>;
 101
 102                 rfkill {
 103                         label = "rfkill";
 104                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 105                         linux,code = <KEY_RFKILL>;
 106                 };
 107                 reset {
 108                         label = "reset";
 109                         gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
 110                         linux,code = <KEY_RESTART>;
 111                 };
 112         };
 113
 114         gpio-leds {
 115                 compatible = "gpio-leds";
 116                 wlan: wlan {
 117                         label = "arv7506pw11:green:wlan";
 118                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 119                 };
 120                 power: power {
 121                         label = "arv7506pw11:green:power";
 122                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
 123                         default-state = "keep";
 124                 };
 125                 dsl: dsl {
 126                         label = "arv7506pw11:green:dsl";
 127                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 128                 };
 129                 internet: internet {
 130                         label = "arv7506pw11:green:internet";
 131                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
 132                 };
 133                 power_red: power_red {
 134                         label = "arv7506pw11:red:power";
 135                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 136                 };
 137                 internet_red {
 138                         label = "arv7506pw11:red:internet";
 139                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
 140                 };
 141                 info {
 142                         label = "arv7506pw11:green:info";
 143                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 144                 };
 145                 telefon {
 146                         label = "arv7506pw11:green:telefon";
 147                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 148                 };
 149                 info_red {
 150                         label = "arv7506pw11:red:info";
 151                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 152                 };
 153         };
 154 };