-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar9330.dtsi"
-
-/ {
- model = "PQI Air-Pen";
- compatible = "pqi,air-pen", "qca,ar9330";
-
- aliases {
- serial0 = &uart;
- led-boot = &wlan;
- led-failsafe = &wlan;
- led-upgrade = &wlan;
- };
-
- leds {
- compatible = "gpio-leds";
-
- wlan: wlan {
- label = "air-pen:blue:wlan";
- gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "phy0tpt";
- };
-
- wps {
- label = "air-pen:blue:wps";
- gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <100>;
-
- wps {
- label = "wps";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
-
- reset {
- label = "reset";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
- debounce-interval = <60>;
- };
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&gpio {
- status = "okay";
-};
-
-&usb {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&spi {
- num-cs = <1>;
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x000000 0x040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x040000 0x010000>;
- };
-
- art: partition@50000 {
- label = "art";
- reg = <0x050000 0x010000>;
- read-only;
- };
-
- partition@60000 {
- label = "NVRAM";
- reg = <0x060000 0x010000>;
- read-only;
- };
-
- partition@70000 {
- label = "firmware";
- reg = <0x070000 0x780000>;
- };
-
- partition@7f0000 {
- label = "CONF";
- reg = <0x7f0000 0x010000>;
- read-only;
- };
- };
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x1002>;
-
- gmac-config {
- device = <&gmac>;
-
- switch-phy-addr-swap = <0>;
- switch-phy-swap = <0>;
- };
-};
-
-ð1 {
- status = "okay";
- compatible = "syscon", "simple-mfd";
-};
-
-&wmac {
- status = "okay";
- mtd-cal-data = <&art 0x1000>;
- mtd-mac-address = <&art 0x2>;
-};