target/linux/ramips/dts/WIZFI630A.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "wiznet,wizfi630a", "ralink,rt5350-soc";
  10         model = "WIZnet WizFi630A";
  11
  12         aliases {
  13                 led-status = &led_run;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS1,115200";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 led_run: run {
  24                         label = "wizfi630a::run";
  25                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 wps {
  29                         label = "wizfi630a::wps";
  30                         gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
  31                 };
  32
  33                 uart1 {
  34                         label = "wizfi630a::uart1";
  35                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  36                 };
  37
  38                 uart2 {
  39                         label = "wizfi630a::uart2";
  40                         gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         gpio-keys-polled {
  45                 compatible = "gpio-keys-polled";
  46                 poll-interval = <20>;
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_WPS_BUTTON>;
  58                 };
  59
  60                 scm1 {
  61                         label = "SCM1";
  62                         gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
  63                         linux,code = <BTN_0>;
  64                 };
  65
  66                 scm2 {
  67                         label = "SCM2";
  68                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  69                         linux,code = <BTN_1>;
  70                 };
  71         };
  72 };
  73
  74 &gpio1 {
  75         status = "okay";
  76 };
  77
  78 &spi0 {
  79         status = "okay";
  80
  81         m25p80@0 {
  82                 compatible = "jedec,spi-nor";
  83                 reg = <0>;
  84                 spi-max-frequency = <10000000>;
  85
  86                 partitions {
  87                         compatible = "fixed-partitions";
  88                         #address-cells = <1>;
  89                         #size-cells = <1>;
  90
  91                         partition@0 {
  92                                 #size-cells = <1>;
  93                                 label = "uboot";
  94                                 reg = <0x0 0x30000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@30000 {
  99                                 #size-cells = <1>;
 100                                 label = "uboot-env";
 101                                 reg = <0x30000 0x10000>;
 102                                 read-only;
 103                         };
 104
 105                         factory: partition@40000 {
 106                                 #size-cells = <1>;
 107                                 label = "factory";
 108                                 reg = <0x40000 0x10000>;
 109                                 read-only;
 110                         };
 111
 112                         partition@50000 {
 113                                 #size-cells = <1>;
 114                                 label = "firmware";
 115                                 reg = <0x50000 0xfb0000>;
 116                         };
 117                 };
 118         };
 119 };
 120
 121 &uart {
 122         status = "okay";
 123         pinctrl-names = "default";
 124         pinctrl-0 = <&uartf_pins>;
 125 };
 126
 127 &pinctrl {
 128         state_default: pinctrl0 {
 129                 gpio {
 130                         ralink,group = "i2c", "jtag" ;
 131                         ralink,function = "gpio";
 132                 };
 133         };
 134 };
 135
 136 &ethernet {
 137         mtd-mac-address = <&factory 0x4>;
 138 };
 139
 140 &esw {
 141         mediatek,portmap = <0x17>;
 142 };
 143
 144 &wmac {
 145         ralink,mtd-eeprom = <&factory 0>;
 146 };
 147
 148 &ehci {
 149         status = "okay";
 150 };
 151
 152 &ohci {
 153         status = "okay";
 154 };