target/linux/ramips/dts/TEW-714TRU.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "trendnet,tew-714tru", "ralink,rt5350-soc";
  10         model = "TRENDnet TEW714TRU";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 usb {
  16                         label = "tew-714tru:red:usb";
  17                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 wifi {
  21                         label = "tew-714tru:green:wifi";
  22                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  23                 };
  24         };
  25
  26         gpio-keys-polled {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29
  30                 reset {
  31                         label = "reset";
  32                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  33                         linux,code = <KEY_RESTART>;
  34                 };
  35
  36                 wps {
  37                         label = "wps";
  38                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                 };
  41         };
  42
  43         gpio_export {
  44                 compatible = "gpio-export";
  45                 #size-cells = <0>;
  46
  47                 repeater {
  48                         gpio-export,name = "repeater_switch";
  49                         gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
  50                 };
  51
  52                 wisp {
  53                         gpio-export,name = "wisp_switch";
  54                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
  55                 };
  56         };
  57 };
  58
  59 &spi0 {
  60         status = "okay";
  61
  62         m25p80@0 {
  63                 compatible = "jedec,spi-nor";
  64                 reg = <0>;
  65                 spi-max-frequency = <10000000>;
  66
  67                 partitions {
  68                         compatible = "fixed-partitions";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71
  72                         partition@0 {
  73                                 label = "u-boot";
  74                                 reg = <0x0 0x30000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@30000 {
  79                                 label = "u-boot-env";
  80                                 reg = <0x30000 0x10000>;
  81                                 read-only;
  82                         };
  83
  84                         factory: partition@40000 {
  85                                 label = "factory";
  86                                 reg = <0x40000 0x10000>;
  87                                 read-only;
  88                         };
  89
  90                         partition@50000 {
  91                                 label = "firmware";
  92                                 reg = <0x50000 0x7b0000>;
  93                         };
  94                 };
  95         };
  96 };
  97
  98 &pinctrl {
  99         state_default: pinctrl0 {
 100                 gpio {
 101                         ralink,group = "i2c", "jtag", "uartf";
 102                         ralink,function = "gpio";
 103                 };
 104         };
 105 };
 106
 107 &ethernet {
 108         mtd-mac-address = <&factory 0x4>;
 109 };
 110
 111 &esw {
 112         mediatek,portmap = <0x1>;
 113         mediatek,portdisable = <0x3e>;
 114 };
 115
 116 &wmac {
 117         ralink,mtd-eeprom = <&factory 0>;
 118 };
 119
 120 &ehci {
 121         status = "okay";
 122 };
 123
 124 &ohci {
 125         status = "okay";
 126 };