target/linux/ramips/dts/ArcherC50.dts

   1 /dts-v1/;
   2
   3 #include "mt7620a.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/gpio/gpio.h>
   7
   8 / {
   9         compatible = "tplink,c50", "ralink,mt7620a-soc";
  10         model = "TP-Link Archer C50";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         chosen {
  17                 bootargs = "console=ttyS0,115200";
  18         };
  19
  20         gpio-leds {
  21                 compatible = "gpio-leds";
  22
  23                 lan {
  24                         label = "c50:green:lan";
  25                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  26                 };
  27
  28                 led_power: power {
  29                         label = "c50:green:power";
  30                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                 };
  33
  34                 usb {
  35                         label = "c50:green:usb";
  36                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  37                         trigger-sources = <&ohci_port1>, <&ehci_port1>;
  38                         linux,default-trigger = "usbport";
  39                 };
  40
  41                 wan {
  42                         label = "c50:green:wan";
  43                         gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wan_orange {
  47                         label = "c50:orange:wan";
  48                         gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 wlan5g {
  52                         label = "c50:green:wlan5g";
  53                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 wlan2g {
  57                         label = "c50:green:wlan2g";
  58                         gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 wps {
  62                         label = "c50:green:wps";
  63                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         gpio-keys-polled {
  68                 compatible = "gpio-keys-polled";
  69                 poll-interval = <20>;
  70
  71                 reset {
  72                         label = "reset";
  73                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  74                         linux,code = <KEY_RESTART>;
  75                 };
  76
  77                 rfkill {
  78                         label = "rfkill";
  79                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  80                         linux,code = <KEY_RFKILL>;
  81                 };      };
  82 };
  83
  84 &gpio1 {
  85         status = "okay";
  86 };
  87
  88 &gpio2 {
  89         status = "okay";
  90 };
  91
  92 &gpio3 {
  93         status = "okay";
  94 };
  95
  96 &spi0 {
  97         status = "okay";
  98
  99         m25p80@0 {
 100                 compatible = "jedec,spi-nor";
 101                 reg = <0>;
 102                 spi-max-frequency = <10000000>;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         partition@0 {
 110                                 label = "u-boot";
 111                                 reg = <0x0 0x20000>;
 112                                 read-only;
 113                         };
 114
 115                         partition@20000 {
 116                                 label = "firmware";
 117                                 reg = <0x20000 0x7a0000>;
 118                         };
 119
 120                         partition@7c0000 {
 121                                 label = "config";
 122                                 reg = <0x7c0000 0x10000>;
 123                                 read-only;
 124                         };
 125
 126                         rom: partition@7d0000 {
 127                                 label = "rom";
 128                                 reg = <0x7d0000 0x10000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@7e0000 {
 133                                 label = "romfile";
 134                                 reg = <0x7e0000 0x10000>;
 135                                 read-only;
 136                         };
 137
 138                         radio: partition@7f0000 {
 139                                 label = "radio";
 140                                 reg = <0x7f0000 0x10000>;
 141                                 read-only;
 142                         };
 143                 };
 144         };
 145 };
 146
 147 &pinctrl {
 148         state_default: pinctrl0 {
 149                 gpio {
 150                         ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "ephy", "spi refclk", "mdio", "wdt", "nd_sd";
 151                         ralink,function = "gpio";
 152                 };
 153         };
 154 };
 155
 156 &ethernet {
 157                 pinctrl-names = "default";
 158                 mtd-mac-address = <&rom 0xf100>;
 159                 mediatek,portmap = "wllll";
 160         };
 161
 162 &ehci {
 163         status = "okay";
 164 };
 165
 166 &ohci {
 167         status = "okay";
 168 };
 169
 170 &gsw {
 171         mediatek,port4 = "ephy";
 172 };
 173
 174 &wmac {
 175         ralink,mtd-eeprom = <&radio 0>;
 176         mtd-mac-address = <&rom 0xf100>;
 177         mtd-mac-address-increment = <(-2)>;
 178         pinctrl-names = "default";
 179         pinctrl-0 = <&pa_pins>;
 180 };
 181
 182 &pcie {
 183         status = "okay";
 184 };
 185
 186 &pcie0 {
 187         mt76@0,0 {
 188                 reg = <0x0000 0 0 0 0>;
 189                 mediatek,mtd-eeprom = <&radio 32768>;
 190                 ieee80211-freq-limit = <5000000 6000000>;
 191                 mtd-mac-address = <&rom 0xf100>;
 192                 mtd-mac-address-increment = <(-1)>;
 193         };
 194 };