target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-fritz4040.dts

   1 /* Copyright (c) 2015, The Linux Foundation. All rights reserved.
   2  *
   3  * Permission to use, copy, modify, and/or distribute this software for any
   4  * purpose with or without fee is hereby granted, provided that the above
   5  * copyright notice and this permission notice appear in all copies.
   6  *
   7  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
   8  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
   9  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  10  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  11  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  12  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  13  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  14  *
  15  */
  16
  17 #include "qcom-ipq4019-ap.dk01.1.dtsi"
  18 #include "qcom-ipq4019-bus.dtsi"
  19 #include <dt-bindings/gpio/gpio.h>
  20 #include <dt-bindings/input/input.h>
  21
  22 / {
  23         model = "AVM FRITZ!Box 4040";
  24         compatible = "avm,fritzbox-4040", "qcom,ipq4019";
  25
  26         reserved-memory {
  27                 #address-cells = <0x1>;
  28                 #size-cells = <0x1>;
  29                 ranges;
  30
  31                 rsvd1@87000000 {
  32                         reg = <0x87000000 0x500000>;
  33                         no-map;
  34                 };
  35
  36                 wifi_dump@87500000 {
  37                         reg = <0x87500000 0x600000>;
  38                         no-map;
  39                 };
  40
  41                 rsvd2@87B00000 {
  42                         reg = <0x87b00000 0x500000>;
  43                         no-map;
  44                 };
  45         };
  46 /*
  47         This also works. Maybe it could be smaller still.
  48
  49         reserved-memory {
  50                 #address-cells = <0x1>;
  51                 #size-cells = <0x1>;
  52                 ranges;
  53
  54                 rsvd1@87E00000 {
  55                         reg = <0x87e00000 0x200000>;
  56                         no-map;
  57                 };
  58         };
  59 */
  60
  61         soc {
  62                 mdio@90000 {
  63                         status = "okay";
  64                 };
  65
  66                 qca8075: ess-switch@c000000 {
  67                         status = "okay";
  68
  69                         #gpio-cells = <2>;
  70                         gpio-controller;
  71
  72                         enable-usb-power {
  73                                 gpio-hog;
  74                                 line-name = "enable USB3 power";
  75                                 gpios = <0x7 GPIO_ACTIVE_HIGH>;
  76                                 output-high;
  77                         };
  78                 };
  79
  80                 ess-psgmii@98000 {
  81                         status = "okay";
  82                 };
  83
  84                 edma@c080000 {
  85                         status = "okay";
  86                 };
  87
  88                 wifi@a000000 {
  89                         status = "okay";
  90                 };
  91
  92                 wifi@a800000 {
  93                         status = "okay";
  94                 };
  95         };
  96
  97         gpio-keys {
  98                 compatible = "gpio-keys";
  99
 100                 wlan {
 101                         label = "wlan";
 102                         gpios = <&tlmm 0x3a GPIO_ACTIVE_LOW>;
 103                         linux,code = <KEY_RFKILL>;
 104                 };
 105
 106                 wps {
 107                         label = "wps";
 108                         gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_WPS_BUTTON>;
 110                 };
 111         };
 112
 113         aliases {
 114                 led-boot = &power;
 115                 led-failsafe = &flash;
 116                 led-running = &power;
 117                 led-upgrade = &flash;
 118         };
 119
 120         gpio-leds {
 121                 compatible = "gpio-leds";
 122
 123                 wlan {
 124                         label = "fritz4040:green:wlan";
 125                         gpios = <&qca8075 0x1 GPIO_ACTIVE_HIGH>;
 126                 };
 127
 128                 panic: info_red {
 129                         label = "fritz4040:red:info";
 130                         gpios = <&qca8075 0x3 GPIO_ACTIVE_HIGH>;
 131                         panic-indicator;
 132                 };
 133
 134                 wan {
 135                         label = "fritz4040:green:wan";
 136                         gpios = <&qca8075 0x5 GPIO_ACTIVE_HIGH>;
 137                 };
 138
 139                 power: power {
 140                         label = "fritz4040:green:power";
 141                         gpios = <&qca8075 0xb GPIO_ACTIVE_HIGH>;
 142                 };
 143
 144                 lan {
 145                         label = "fritz4040:green:lan";
 146                         gpios = <&qca8075 0xd GPIO_ACTIVE_HIGH>;
 147                 };
 148
 149                 flash: info_amber {
 150                         label = "fritz4040:amber:info";
 151                         gpios = <&qca8075 0xf GPIO_ACTIVE_HIGH>;
 152                 };
 153         };
 154 };
 155
 156 &spi_0 { /* BLSP1 QUP1 */
 157         status = "ok";
 158
 159         mx25l25635e@0 {
 160                 status = "disabled";
 161         };
 162
 163         mx25l25635f@0 {
 164                 compatible = "mx25l25635f", "jedec,spi-nor";
 165                 #address-cells = <1>;
 166                 #size-cells = <0>;
 167                 reg = <0>;
 168                 spi-max-frequency = <24000000>;
 169                 status = "ok";
 170                 m25p,fast-read;
 171
 172                 partitions {
 173                         compatible = "fixed-partitions";
 174                         #address-cells = <1>;
 175                         #size-cells = <1>;
 176
 177                         partition0@0 {
 178                                 label = "SBL1";
 179                                 reg = <0x00000000 0x00040000>;
 180                                 read-only;
 181                         };
 182                         partition1@40000 {
 183                                 label = "MIBIB";
 184                                 reg = <0x00040000 0x00020000>;
 185                                 read-only;
 186                         };
 187                         partition2@60000 {
 188                                 label = "QSEE";
 189                                 reg = <0x00060000 0x00060000>;
 190                                 read-only;
 191                         };
 192                         partition3@c0000 {
 193                                 label = "CDT";
 194                                 reg = <0x000c0000 0x00010000>;
 195                                 read-only;
 196                         };
 197                         partition4@d0000 {
 198                                 label = "DDRPARAMS";
 199                                 reg = <0x000d0000 0x00010000>;
 200                                 read-only;
 201                         };
 202                         partition5@e0000 {
 203                                 label = "APPSBLENV"; /* uboot env - empty */
 204                                 reg = <0x000e0000 0x00010000>;
 205                                 read-only;
 206                         };
 207                         partition6@f0000 {
 208                                 label = "urlader"; /* APPSBL */
 209                                 reg = <0x000f0000 0x0002dc000>;
 210                                 read-only;
 211                         };
 212                         partition7@11dc00 {
 213                                 /* make a backup of this partition! */
 214                                 label = "urlader_config";
 215                                 reg = <0x0011dc00 0x00002400>;
 216                                 read-only;
 217                         };
 218                         partition8@120000 {
 219                                 label = "tffs1";
 220                                 reg = <0x00120000 0x00080000>;
 221                                 read-only;
 222                         };
 223                         partition9@1a0000 {
 224                                 label = "tffs2";
 225                                 reg = <0x001a0000 0x00080000>;
 226                                 read-only;
 227                         };
 228                         partition10@220000 {
 229                                 label = "uboot";
 230                                 reg = <0x00220000 0x00080000>;
 231                                 read-only;
 232                         };
 233                         partition11@2A0000 {
 234                                 label = "firmware";
 235                                 reg = <0x002A0000 0x01C60000>;
 236                         };
 237                         partition12@1f00000 {
 238                                 label = "jffs2";
 239                                 reg = <0x01F00000 0x00100000>;
 240                         };
 241                 };
 242         };
 243 };
 244
 245 &cpu0_opp_table {
 246         /delete-node/ opp@666000000;
 247
 248         opp@710000000 {
 249                 opp-hz = /bits/ 64 <710000000>;
 250                 clock-latency-ns = <256000>;
 251         };
 252 };