friendlyarm,nanopi-r2c|\
friendlyarm,nanopi-r2c-plus|\
friendlyarm,nanopi-r2s|\
+radxa,cm3-io|\
xunlong,orangepi-r1-plus|\
xunlong,orangepi-r1-plus-lts)
set_interface_core 2 "eth0"
endef
TARGET_DEVICES += pine64_rockpro64
+define Device/radxa_cm3-io
+ DEVICE_VENDOR := Radxa
+ DEVICE_MODEL := CM3 IO
+ SOC := rk3566
+ DEVICE_DTS := rockchip/rk3566-radxa-cm3-io
+ UBOOT_DEVICE_NAME := radxa-cm3-io-rk3566
+endef
+TARGET_DEVICES += radxa_cm3-io
+
define Device/radxa_rock-pi-4a
DEVICE_VENDOR := Radxa
DEVICE_MODEL := ROCK Pi 4A
--- /dev/null
+From 096ebfb74b19f2d4bdcbc33ae02e857ff4b3e0a0 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Thu, 12 Jan 2023 16:29:02 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add Radxa Compute Module 3 IO board
+
+Radxa Compute Module 3(CM3) IO board is an application board from Radxa
+and is compatible with Raspberry Pi CM4 IO form factor.
+
+Specification:
+- 1x HDMI,
+- 2x MIPI DSI
+- 2x MIPI CSI2
+- 1x eDP
+- 1x PCIe card
+- 2x SATA
+- 2x USB 2.0 Host
+- 1x USB 3.0
+- 1x USB 2.0 OTG
+- Phone jack
+- microSD slot
+- 40-pin GPIO expansion header
+- 12V DC
+
+Radxa CM3 needs to mount on top of this IO board in order to create
+complete Radxa CM3 IO board platform.
+
+Add support for Radxa CM3 IO Board.
+
+Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
+Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
+Co-developed-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230112105902.192852-3-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 179 ++++++++++++++++++
+ 2 files changed, 180 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+
+--- a/arch/arm64/boot/dts/rockchip/Makefile
++++ b/arch/arm64/boot/dts/rockchip/Makefile
+@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pi
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-pinenote-v1.2.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-a.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-quartz64-b.dtb
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-radxa-cm3-io.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-roc-pc.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -0,0 +1,179 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Radxa Limited
++ * Copyright (c) 2022 Amarula Solutions(India)
++ */
++
++/dts-v1/;
++#include <dt-bindings/soc/rockchip,vop2.h>
++#include "rk3566.dtsi"
++#include "rk3566-radxa-cm3.dtsi"
++
++/ {
++ model = "Radxa Compute Module 3(CM3) IO Board";
++ compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
++
++ aliases {
++ mmc1 = &sdmmc0;
++ };
++
++ chosen: chosen {
++ stdout-path = "serial2:1500000n8";
++ };
++
++ hdmi-con {
++ compatible = "hdmi-connector";
++ type = "a";
++
++ port {
++ hdmi_con_in: endpoint {
++ remote-endpoint = <&hdmi_out_con>;
++ };
++ };
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-1 {
++ gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_LOW>;
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_ACTIVITY;
++ linux,default-trigger = "heartbeat";
++ pinctrl-names = "default";
++ pinctrl-0 = <&pi_nled_activity>;
++ };
++ };
++
++ vcc5v0_usb30: vcc5v0-usb30-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc5v0_usb30";
++ enable-active-high;
++ gpio = <&gpio3 RK_PC2 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&vcc5v0_usb30_en_h>;
++ regulator-always-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ vin-supply = <&vcc_sys>;
++ };
++
++ vcca1v8_image: vcca1v8-image-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcca1v8_image";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc_1v8_p>;
++ };
++
++ vdda0v9_image: vdda0v9-image-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcca0v9_image";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ vin-supply = <&vdda_0v9>;
++ };
++};
++
++&combphy1 {
++ status = "okay";
++};
++
++&hdmi {
++ avdd-0v9-supply = <&vdda0v9_image>;
++ avdd-1v8-supply = <&vcca1v8_image>;
++ status = "okay";
++};
++
++&hdmi_in {
++ hdmi_in_vp0: endpoint {
++ remote-endpoint = <&vp0_out_hdmi>;
++ };
++};
++
++&hdmi_out {
++ hdmi_out_con: endpoint {
++ remote-endpoint = <&hdmi_con_in>;
++ };
++};
++
++&hdmi_sound {
++ status = "okay";
++};
++
++&pinctrl {
++ leds {
++ pi_nled_activity: pi-nled-activity {
++ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ sdcard {
++ sdmmc_pwren: sdmmc-pwren {
++ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
++ usb {
++ vcc5v0_usb30_en_h: vcc5v0-host-en-h {
++ rockchip,pins = <3 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&sdmmc0 {
++ bus-width = <4>;
++ cap-mmc-highspeed;
++ cap-sd-highspeed;
++ disable-wp;
++ vqmmc-supply = <&vccio_sd>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det &sdmmc0_pwren>;
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb2phy0_host {
++ phy-supply = <&vcc5v0_usb30>;
++ status = "okay";
++};
++
++&usb2phy1_host {
++ status = "okay";
++};
++
++&usb2phy1_otg {
++ status = "okay";
++};
++
++&usb_host0_ehci {
++ status = "okay";
++};
++
++&usb_host1_xhci {
++ status = "okay";
++};
++
++&vop {
++ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
++ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
++ status = "okay";
++};
++
++&vop_mmu {
++ status = "okay";
++};
++
++&vp0 {
++ vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
++ reg = <ROCKCHIP_VOP2_EP_HDMI0>;
++ remote-endpoint = <&hdmi_in_vp0>;
++ };
++};
--- /dev/null
+From cc52bfc04726a574fc4440bbbe0c710890e7040a Mon Sep 17 00:00:00 2001
+From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Date: Wed, 25 Jan 2023 21:40:22 +0530
+Subject: [PATCH] arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
+
+Add ethernet nodes for enabling gmac1 on the Radxa CM3 IO board.
+
+Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230125161023.12115-1-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 93 +++++++++++++++++++
+ 1 file changed, 93 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -21,6 +21,13 @@
+ stdout-path = "serial2:1500000n8";
+ };
+
++ gmac1_clkin: external-gmac1-clock {
++ compatible = "fixed-clock";
++ clock-frequency = <125000000>;
++ clock-output-names = "gmac1_clkin";
++ #clock-cells = <0>;
++ };
++
+ hdmi-con {
+ compatible = "hdmi-connector";
+ type = "a";
+@@ -83,6 +90,29 @@
+ status = "okay";
+ };
+
++&gmac1 {
++ assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
++ assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
++ assigned-clock-rates = <0>, <125000000>;
++ clock_in_out = "input";
++ phy-handle = <&rgmii_phy1>;
++ phy-mode = "rgmii";
++ pinctrl-names = "default";
++ pinctrl-0 = <&gmac1m0_miim
++ &gmac1m0_tx_bus2
++ &gmac1m0_rx_bus2
++ &gmac1m0_rgmii_clk
++ &gmac1m0_rgmii_bus
++ &gmac1m0_clkinout>;
++ snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
++ snps,reset-active-low;
++ /* Reset time is 20ms, 100ms for rtl8211f */
++ snps,reset-delays-us = <0 20000 100000>;
++ tx_delay = <0x46>;
++ rx_delay = <0x2e>;
++ status = "okay";
++};
++
+ &hdmi {
+ avdd-0v9-supply = <&vdda0v9_image>;
+ avdd-1v8-supply = <&vcca1v8_image>;
+@@ -105,7 +135,70 @@
+ status = "okay";
+ };
+
++&mdio1 {
++ rgmii_phy1: ethernet-phy@0 {
++ compatible="ethernet-phy-ieee802.3-c22";
++ reg= <0x0>;
++ };
++};
++
+ &pinctrl {
++ gmac1 {
++ gmac1m0_miim: gmac1m0-miim {
++ rockchip,pins =
++ /* gmac1_mdcm0 */
++ <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_mdiom0 */
++ <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
++ rockchip,pins =
++ /* gmac1_rxd0m0 */
++ <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_rxd1m0 */
++ <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_rxdvcrsm0 */
++ <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
++ rockchip,pins =
++ /* gmac1_txd0m0 */
++ <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txd1m0 */
++ <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txenm0 */
++ <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
++ rockchip,pins =
++ /* gmac1_rxclkm0 */
++ <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txclkm0 */
++ <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
++ rockchip,pins =
++ /* gmac1_rxd2m0 */
++ <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_rxd3m0 */
++ <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txd2m0 */
++ <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
++ /* gmac1_txd3m0 */
++ <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
++ };
++
++ gmac1m0_clkinout: gmac1m0-clkinout {
++ rockchip,pins =
++ /* gmac1_mclkinoutm0 */
++ <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
++ };
++ };
++
+ leds {
+ pi_nled_activity: pi-nled-activity {
+ rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
--- /dev/null
+From 7469ab529bcad50490f6ff651c3e4f03bfa88fe0 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Thu, 12 Jan 2023 16:29:01 +0530
+Subject: [PATCH] arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Radxa Compute Module 3(CM3) is one of the modules from a series
+System On Module based on the Radxa ROCK 3 series and is compatible
+with Raspberry Pi CM4 pinout and form factor.
+
+Specification:
+- Rockchip RK3566
+- up to 8GB LPDDR4
+- up to 128GB high performance eMMC
+- Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless,
+ BT 5.0, BLE with onboard and external antenna.
+- Gigabit Ethernet PHY
+
+Radxa CM3 needs to mount on top of this IO board in order to create
+complete Radxa CM3 IO board platform.
+
+Since Radxa CM3 is compatible with Raspberry Pi CM4 pinout so it is
+possible to mount Radxa CM3 on top of the Rasberry Pi CM4 IO board.
+
+Add support for Radxa CM3.
+
+Co-developed-by: FUKAUMI Naoki <naoki@radxa.com>
+Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230112105902.192852-2-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 345 ++++++++++++++++++
+ 1 file changed, 345 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+
+--- /dev/null
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -0,0 +1,345 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++/*
++ * Copyright (c) 2022 Radxa Limited
++ * Copyright (c) 2022 Amarula Solutions(India)
++ */
++
++#include <dt-bindings/gpio/gpio.h>
++#include <dt-bindings/leds/common.h>
++
++/ {
++ compatible = "radxa,radxa-cm3", "rockchip,rk3566";
++
++ aliases {
++ mmc0 = &sdhci;
++ };
++
++ leds {
++ compatible = "gpio-leds";
++
++ led-0 {
++ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
++ color = <LED_COLOR_ID_GREEN>;
++ function = LED_FUNCTION_STATUS;
++ linux,default-trigger = "timer";
++ default-state = "on";
++ pinctrl-names = "default";
++ pinctrl-0 = <&user_led2>;
++ };
++ };
++
++ vcc_sys: vcc-sys-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
++ };
++
++ vcc_1v8: vcc-1v8-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc_1v8_p>;
++ };
++
++ vcc_3v3: vcc-3v3-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcc_3v3";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc3v3_sys>;
++ };
++
++ vcca_1v8: vcca-1v8-regulator {
++ compatible = "regulator-fixed";
++ regulator-name = "vcca_1v8";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ vin-supply = <&vcc_1v8_p>;
++ };
++};
++
++&cpu0 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu1 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu2 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&cpu3 {
++ cpu-supply = <&vdd_cpu>;
++};
++
++&gpu {
++ mali-supply = <&vdd_gpu_npu>;
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++
++ vdd_cpu: regulator@1c {
++ compatible = "tcs,tcs4525";
++ reg = <0x1c>;
++ fcs,suspend-voltage-selector = <1>;
++ regulator-name = "vdd_cpu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <712500>;
++ regulator-max-microvolt = <1390000>;
++ regulator-ramp-delay = <2300>;
++ vin-supply = <&vcc_sys>;
++
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ rk817: pmic@20 {
++ compatible = "rockchip,rk817";
++ reg = <0x20>;
++ #clock-cells = <1>;
++ clock-output-names = "rk817-clkout1", "rk817-clkout2";
++ interrupt-parent = <&gpio0>;
++ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&pmic_int_l>;
++ rockchip,system-power-controller;
++ wakeup-source;
++
++ vcc1-supply = <&vcc_sys>;
++ vcc2-supply = <&vcc_sys>;
++ vcc3-supply = <&vcc_sys>;
++ vcc4-supply = <&vcc_sys>;
++ vcc5-supply = <&vcc_sys>;
++ vcc6-supply = <&vcc_sys>;
++ vcc7-supply = <&vcc_sys>;
++
++ regulators {
++ vdd_logic: DCDC_REG1 {
++ regulator-name = "vdd_logic";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vdd_gpu_npu: DCDC_REG2 {
++ regulator-name = "vdd_gpu_npu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <500000>;
++ regulator-max-microvolt = <1350000>;
++ regulator-ramp-delay = <6001>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc_ddr: DCDC_REG3 {
++ regulator-name = "vcc_ddr";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ };
++ };
++
++ vcc3v3_sys: DCDC_REG4 {
++ regulator-name = "vcc3v3_sys";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-initial-mode = <0x2>;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcca1v8_pmu: LDO_REG1 {
++ regulator-name = "vcca1v8_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <1800000>;
++ };
++ };
++
++ vdda_0v9: LDO_REG2 {
++ regulator-name = "vdda_0v9";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vdda0v9_pmu: LDO_REG3 {
++ regulator-name = "vdda0v9_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <900000>;
++ regulator-max-microvolt = <900000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <900000>;
++ };
++ };
++
++ vccio_acodec: LDO_REG4 {
++ regulator-name = "vccio_acodec";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vccio_sd: LDO_REG5 {
++ regulator-name = "vccio_sd";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc3v3_pmu: LDO_REG6 {
++ regulator-name = "vcc3v3_pmu";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-state-mem {
++ regulator-on-in-suspend;
++ regulator-suspend-microvolt = <3300000>;
++ };
++ };
++
++ vcc_1v8_p: LDO_REG7 {
++ regulator-name = "vcc_1v8_p";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc1v8_dvp: LDO_REG8 {
++ regulator-name = "vcc1v8_dvp";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ vcc2v8_dvp: LDO_REG9 {
++ regulator-name = "vcc2v8_dvp";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <2800000>;
++ regulator-max-microvolt = <2800000>;
++ regulator-state-mem {
++ regulator-off-in-suspend;
++ };
++ };
++
++ };
++ };
++};
++
++&pinctrl {
++ pmic {
++ pmic_int_l: pmic-int-l {
++ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
++ };
++ };
++
++ leds {
++ user_led2: user-led2 {
++ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++};
++
++&pmu_io_domains {
++ pmuio1-supply = <&vcc3v3_pmu>;
++ pmuio2-supply = <&vcc_3v3>;
++ vccio1-supply = <&vccio_acodec>;
++ vccio2-supply = <&vcc_1v8>;
++ vccio3-supply = <&vccio_sd>;
++ vccio4-supply = <&vcc_1v8>;
++ vccio5-supply = <&vcc_3v3>;
++ vccio6-supply = <&vcc_3v3>;
++ vccio7-supply = <&vcc_3v3>;
++ status = "okay";
++};
++
++&saradc {
++ vref-supply = <&vcca_1v8>;
++ status = "okay";
++};
++
++&sdhci {
++ bus-width = <8>;
++ max-frequency = <200000000>;
++ mmc-hs200-1_8v;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
++ vmmc-supply = <&vcc_3v3>;
++ vqmmc-supply = <&vcc_1v8>;
++ status = "okay";
++};
++
++&usb2phy0 {
++ status = "okay";
++};
++
++&usb2phy1 {
++ status = "okay";
++};
++
++&tsadc {
++ rockchip,hw-tshut-mode = <1>;
++ rockchip,hw-tshut-polarity = <0>;
++ status = "okay";
++};
--- /dev/null
+From af5a803bf212e077e5fb7a1d4cf6be02f74a74ca Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Wed, 25 Jan 2023 21:40:23 +0530
+Subject: [PATCH] arm64: dts: rockchip: rk3566: Enable WiFi, BT support for
+ Radxa CM3
+
+Radxa Compute Module 3 has an onboard AW_CM256SM WiFi/BT module.
+
+Add nodes for enabling it.
+
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230125161023.12115-2-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 80 +++++++++++++++++++
+ 1 file changed, 80 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -66,6 +66,15 @@
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_1v8_p>;
+ };
++
++ sdio_pwrseq: pwrseq-sdio {
++ compatible = "mmc-pwrseq-simple";
++ clocks = <&rk817 1>;
++ clock-names = "ext_clock";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_reg_on_h>;
++ reset-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_LOW>;
++ };
+ };
+
+ &cpu0 {
+@@ -287,6 +296,20 @@
+ };
+
+ &pinctrl {
++ bluetooth {
++ bt_host_wake_h: bt-host-wake-h {
++ rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_reg_on_h: bt-reg-on-h {
++ rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ bt_wake_host_h: bt-wake-host-h {
++ rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
++
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+@@ -298,6 +321,16 @@
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
++
++ wifi {
++ wifi_reg_on_h: wifi-reg-on-h {
++ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wifi_host_wake_h: wifi-host-wake-h {
++ rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
+ };
+
+ &pmu_io_domains {
+@@ -318,6 +351,34 @@
+ status = "okay";
+ };
+
++&sdmmc1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ bus-width = <4>;
++ disable-wp;
++ cap-sd-highspeed;
++ cap-sdio-irq;
++ keep-power-in-suspend;
++ mmc-pwrseq = <&sdio_pwrseq>;
++ non-removable;
++ pinctrl-names = "default";
++ pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_clk &sdmmc1_cmd>;
++ sd-uhs-sdr104;
++ vmmc-supply = <&vcc_3v3>;
++ vqmmc-supply = <&vcc_1v8>;
++ status = "okay";
++
++ wifi@1 {
++ compatible = "brcm,bcm43455-fmac";
++ reg = <1>;
++ interrupt-parent = <&gpio2>;
++ interrupts = <RK_PC1 IRQ_TYPE_LEVEL_HIGH>;
++ interrupt-names = "host-wake";
++ pinctrl-names = "default";
++ pinctrl-0 = <&wifi_host_wake_h>;
++ };
++};
++
+ &sdhci {
+ bus-width = <8>;
+ max-frequency = <200000000>;
+@@ -330,6 +391,25 @@
+ status = "okay";
+ };
+
++&uart1 {
++ pinctrl-names = "default";
++ pinctrl-0 = <&uart1m0_ctsn &uart1m0_rtsn &uart1m0_xfer>;
++ status = "okay";
++
++ bluetooth {
++ compatible = "brcm,bcm4345c5";
++ clocks = <&rk817 1>;
++ clock-names = "lpo";
++ device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
++ host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
++ reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
++ vbat-supply = <&vcc_3v3>;
++ vddio-supply = <&vcc_1v8>;
++ };
++};
++
+ &usb2phy0 {
+ status = "okay";
+ };
--- /dev/null
+From 477ed3ade6a46e445b4e2348b710c51df4f6f4b1 Mon Sep 17 00:00:00 2001
+From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Date: Thu, 23 Feb 2023 19:29:29 +0530
+Subject: [PATCH] arm64: dts: rockchip: Enable USB OTG for rk3566 Radxa CM3
+
+Enable USB OTG support for Radxa Compute Module 3 IO Board
+
+Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Link: https://lore.kernel.org/r/20230223135929.630787-1-abbaraju.manojsai@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 8 ++++++++
+ 1 file changed, 8 insertions(+)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -254,6 +254,14 @@
+ status = "okay";
+ };
+
++&usb2phy0_otg {
++ status = "okay";
++};
++
++&usb_host0_xhci {
++ status = "okay";
++};
++
+ &vop {
+ assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+ assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
--- /dev/null
+From 8f19828844f20b22182719cf53be64f8c955aee8 Mon Sep 17 00:00:00 2001
+From: Jagan Teki <jagan@amarulasolutions.com>
+Date: Mon, 23 Jan 2023 12:46:50 +0530
+Subject: [PATCH] arm64: dts: rockchip: Fix compatible for Radxa CM3
+
+The compatible string "radxa,radxa-cm3" referring the product name
+as "Radxa Radxa CM3" but the actual product name is "Radxa CM3".
+
+Fix the compatible strings.
+
+Fixes: 24a28d3eb07d ("dt-bindings: arm: rockchip: Add Radxa Compute Module 3")
+Fixes: 7469ab529bca ("arm64: dts: rockchip: Add rk3566 based Radxa Compute Module 3")
+Fixes: 096ebfb74b19 ("arm64: dts: rockchip: Add Radxa Compute Module 3 IO board")
+Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
+Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20230123071654.73139-1-jagan@amarulasolutions.com
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 2 +-
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -11,7 +11,7 @@
+
+ / {
+ model = "Radxa Compute Module 3(CM3) IO Board";
+- compatible = "radxa,radxa-cm3-io", "radxa,radxa-cm3", "rockchip,rk3566";
++ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+
+ aliases {
+ mmc1 = &sdmmc0;
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -8,7 +8,7 @@
+ #include <dt-bindings/leds/common.h>
+
+ / {
+- compatible = "radxa,radxa-cm3", "rockchip,rk3566";
++ compatible = "radxa,cm3", "rockchip,rk3566";
+
+ aliases {
+ mmc0 = &sdhci;
--- /dev/null
+From f99a75f11f46a24dabb33e90893eebf61dca0566 Mon Sep 17 00:00:00 2001
+From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Date: Sun, 2 Jul 2023 20:52:42 +0200
+Subject: [PATCH] arm64: dts: rockchip: minor whitespace cleanup around '='
+
+The DTS code coding style expects exactly one space before and after '='
+sign.
+
+Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+Link: https://lore.kernel.org/r/20230702185242.44421-1-krzysztof.kozlowski@linaro.org
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 4 ++--
+ 1 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -137,8 +137,8 @@
+
+ &mdio1 {
+ rgmii_phy1: ethernet-phy@0 {
+- compatible="ethernet-phy-ieee802.3-c22";
+- reg= <0x0>;
++ compatible = "ethernet-phy-ieee802.3-c22";
++ reg = <0x0>;
+ };
+ };
+
--- /dev/null
+From 36d9b3ae708e865cdab95692db5a24c5d975383d Mon Sep 17 00:00:00 2001
+From: Dragan Simic <dsimic@manjaro.org>
+Date: Tue, 12 Dec 2023 09:01:39 +0100
+Subject: [PATCH] arm64: dts: rockchip: Add ethernet0 alias to the dts for
+ RK3566 boards
+
+Add ethernet0 alias to the board dts files for a few supported RK3566 boards
+that had it missing. Also, remove the ethernet0 alias from one RK3566 SoM
+dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to
+the dependent board dts files, which actually enable the GMAC.
+
+Signed-off-by: Dragan Simic <dsimic@manjaro.org>
+Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org
+Signed-off-by: Heiko Stuebner <heiko@sntech.de>
+---
+ arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 1 +
+ 1 files changed, 1 insertions(+), 0 deletion(-)
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -14,6 +14,7 @@
+ compatible = "radxa,cm3-io", "radxa,cm3", "rockchip,rk3566";
+
+ aliases {
++ ethernet0 = &gmac1;
+ mmc1 = &sdmmc0;
+ };
+
--- /dev/null
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Marius Durbaca <mariusd84@gmail.com>
+Date: Tue Feb 20 15:05:27 2024 +0200
+Subject: [PATCH] arm64: dts: rockchip: Update LED properties for Radxa
+CM3 IO board
+
+Add OpenWrt's LED aliases for showing system status.
+
+Suggested-by: Tianling Shen <cnsztl@immortalwrt.org>
+Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
+---
+
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
+@@ -16,6 +16,10 @@
+ aliases {
+ ethernet0 = &gmac1;
+ mmc1 = &sdmmc0;
++ led-boot = &status_led;
++ led-failsafe = &status_led;
++ led-running = &status_led;
++ led-upgrade = &status_led;
+ };
+
+ chosen: chosen {
+--- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
++++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi
+@@ -17,7 +17,7 @@
+ leds {
+ compatible = "gpio-leds";
+
+- led-0 {
++ status_led: led-0 {
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_STATUS;
projects / openwrt / staging / jow.git / commitdiff