+++ /dev/null
-[ -e /etc/config/ubootenv ] && exit 0
-
-touch /etc/config/ubootenv
-
-. /lib/uboot-envtools.sh
-. /lib/functions.sh
-
-board=$(board_name)
-
-case "$board" in
-dynalink,dl-wrx36|\
-netgear,wax218)
- idx="$(find_mtd_index 0:appsblenv)"
- [ -n "$idx" ] && \
- ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
- ;;
-compex,wpq873|\
-edgecore,eap102|\
-zyxel,nbg7815)
- idx="$(find_mtd_index 0:appsblenv)"
- [ -n "$idx" ] && \
- ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000" "1"
- ;;
-edimax,cax1800)
- idx="$(find_mtd_index 0:appsblenv)"
- [ -n "$idx" ] && \
- ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
- ;;
-redmi,ax6|\
-xiaomi,ax3600|\
-xiaomi,ax9000)
- idx="$(find_mtd_index 0:appsblenv)"
- [ -n "$idx" ] && \
- ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
- idx2="$(find_mtd_index bdata)"
- [ -n "$idx2" ] && \
- ubootenv_add_uci_sys_config "/dev/mtd$idx2" "0x0" "0x10000" "0x20000"
- ;;
-prpl,haze)
- mmcpart="$(find_mmc_part 0:APPSBLENV)"
- [ -n "$mmcpart" ] && \
- ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x400" "0x100"
- ;;
-qnap,301w)
- idx="$(find_mtd_index 0:appsblenv)"
- [ -n "$idx" ] && \
- ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x20000" "0x20000" "1"
- ;;
-esac
-
-config_load ubootenv
-config_foreach ubootenv_add_app_config
-
-exit 0
--- /dev/null
+[ -e /etc/config/ubootenv ] && exit 0
+
+touch /etc/config/ubootenv
+
+. /lib/uboot-envtools.sh
+. /lib/functions.sh
+
+board=$(board_name)
+
+case "$board" in
+dynalink,dl-wrx36|\
+netgear,wax218)
+ idx="$(find_mtd_index 0:appsblenv)"
+ [ -n "$idx" ] && \
+ ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
+ ;;
+compex,wpq873|\
+edgecore,eap102|\
+zyxel,nbg7815)
+ idx="$(find_mtd_index 0:appsblenv)"
+ [ -n "$idx" ] && \
+ ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000" "1"
+ ;;
+edimax,cax1800)
+ idx="$(find_mtd_index 0:appsblenv)"
+ [ -n "$idx" ] && \
+ ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
+ ;;
+redmi,ax6|\
+xiaomi,ax3600|\
+xiaomi,ax9000)
+ idx="$(find_mtd_index 0:appsblenv)"
+ [ -n "$idx" ] && \
+ ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x20000"
+ idx2="$(find_mtd_index bdata)"
+ [ -n "$idx2" ] && \
+ ubootenv_add_uci_sys_config "/dev/mtd$idx2" "0x0" "0x10000" "0x20000"
+ ;;
+prpl,haze)
+ mmcpart="$(find_mmc_part 0:APPSBLENV)"
+ [ -n "$mmcpart" ] && \
+ ubootenv_add_uci_config "$mmcpart" "0x0" "0x40000" "0x400" "0x100"
+ ;;
+qnap,301w)
+ idx="$(find_mtd_index 0:appsblenv)"
+ [ -n "$idx" ] && \
+ ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x20000" "0x20000" "1"
+ ;;
+esac
+
+config_load ubootenv
+config_foreach ubootenv_add_app_config
+
+exit 0
NSS_DP_HAL_DIR:=$(PKG_BUILD_DIR)/hal
define Build/Configure
- $(LN) $(NSS_DP_HAL_DIR)/soc_ops/$(CONFIG_TARGET_BOARD)/nss_$(CONFIG_TARGET_BOARD).h \
+ $(LN) $(NSS_DP_HAL_DIR)/soc_ops/$(CONFIG_TARGET_SUBTARGET)/nss_$(CONFIG_TARGET_SUBTARGET).h \
$(PKG_BUILD_DIR)/exports/nss_dp_arch.h
endef
CROSS_COMPILE="$(TARGET_CROSS)" \
ARCH="$(LINUX_KARCH)" \
M="$(PKG_BUILD_DIR)" \
- EXTRA_CFLAGS="$(EXTRA_CFLAGS)" SoC="$(CONFIG_TARGET_BOARD)" \
+ EXTRA_CFLAGS="$(EXTRA_CFLAGS)" SoC="$(CONFIG_TARGET_SUBTARGET)" \
$(KERNEL_MAKE_FLAGS) \
$(PKG_JOBS) \
modules
EXTRA_CFLAGS=-fno-stack-protector -I$(STAGING_DIR)/usr/include \
$(LNX_CONFIG_OPTS)
-ifeq ($(CONFIG_TARGET_BOARD), "ipq807x")
+ifeq ($(CONFIG_TARGET_SUBTARGET), "ipq807x")
MAKE_FLAGS+= CHIP_TYPE=HPPE PTP_FEATURE=disable SWCONFIG_FEATURE=disable
endif
FEATURES:=squashfs ramdisk fpu nand rtc emmc
KERNELNAME:=Image dtbs
CPU_TYPE:=cortex-a53
-SUBTARGETS:=generic
+SUBTARGETS:=ipq807x
KERNEL_PATCHVER:=6.1
DEFAULT_PACKAGES += \
kmod-usb3 kmod-usb-dwc3 kmod-usb-dwc3-qcom \
kmod-leds-gpio kmod-gpio-button-hotplug \
- kmod-phy-aquantia kmod-qca-nss-dp \
- ath11k-firmware-ipq8074 kmod-ath11k-ahb \
+ kmod-qca-nss-dp kmod-ath11k-ahb \
wpad-basic-mbedtls uboot-envtools \
e2fsprogs kmod-fs-ext4 losetup
+++ /dev/null
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-edgecore,eap102)
- ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
- ;;
-netgear,wax218)
- ucidef_set_led_netdev "lan" "LAN" "blue:lan" "lan"
- ucidef_set_led_wlan "wlan5g" "WIFI 5GHz" "blue:wlan5g" "phy0radio"
- ucidef_set_led_wlan "wlan2g" "WIFI 2.4GHz" "blue:wlan2g" "phy1radio"
- ;;
-redmi,ax6|\
-xiaomi,ax3600)
- ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
- ;;
-qnap,301w)
- ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
- ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
- ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
- ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
- ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
- ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
- ;;
-esac
-
-board_config_flush
-
-exit 0
+++ /dev/null
-#
-# Copyright (c) 2015 The Linux Foundation. All rights reserved.
-# Copyright (c) 2011-2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-ipq807x_setup_interfaces()
-{
- local board="$1"
-
- case "$board" in
- buffalo,wxr-5950ax12|\
- dynalink,dl-wrx36|\
- xiaomi,ax9000)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
- ;;
- edgecore,eap102)
- ucidef_set_interfaces_lan_wan "lan" "wan"
- ;;
- edimax,cax1800)
- ucidef_set_interfaces_lan_wan "lan"
- ;;
- netgear,wax218)
- ucidef_set_interface_lan "lan" "dhcp"
- ;;
- prpl,haze)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
- ;;
- qnap,301w)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
- ;;
- compex,wpq873|\
- redmi,ax6|\
- xiaomi,ax3600)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
- ;;
- zyxel,nbg7815)
- ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
- ;;
- *)
- echo "Unsupported hardware. Network interfaces not initialized"
- ;;
- esac
-}
-
-board_config_update
-board=$(board_name)
-ipq807x_setup_interfaces $board
-board_config_flush
-
-exit 0
+++ /dev/null
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
- case "$board" in
- buffalo,wxr-5950ax12|\
- compex,wpq873|\
- edgecore,eap102|\
- edimax,cax1800|\
- dynalink,dl-wrx36|\
- netgear,wax218|\
- qnap,301w|\
- redmi,ax6|\
- xiaomi,ax3600|\
- xiaomi,ax9000|\
- zyxel,nbg7815)
- caldata_extract "0:art" 0x1000 0x20000
- ;;
- prpl,haze)
- caldata_extract_mmc "0:ART" 0x1000 0x20000
- ;;
- esac
- ;;
-"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
-"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
- case "$board" in
- prpl,haze)
- caldata_extract_mmc "0:ART" 0x26800 0x20000
- ;;
- xiaomi,ax9000)
- caldata_extract "0:art" 0x26800 0x20000
- ;;
- esac
- ;;
-*)
- exit 1
- ;;
-esac
+++ /dev/null
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
- case $(board_name) in
- edgecore,eap102)
- fw_setenv upgrade_available 0
- # Unset changed flag after sysupgrade complete
- fw_setenv changed
- ;;
- esac
-}
+++ /dev/null
-. /lib/functions.sh
-
-# Prepare UBI devices for OpenWrt installation
-# - rootfs (mtd22)
-# - remove "ubi_rootfs" volume (rootfs on stock)
-# - remove "fw_hash" volume (firmware hash)
-# - user_property (mtd24)
-# - remove "user_property_ubi" volume (user configuration)
-# - remove "extra_property" volume (gzipped syslog)
-buffalo_upgrade_prepare() {
- local ubi_rootdev ubi_propdev
-
- if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
- ! ubi_propdev="$(nand_attach_ubi user_property)"; then
- echo "failed to attach UBI volume \"rootfs\" or \"user_property\", rebooting..."
- reboot -f
- fi
-
- ubirmvol /dev/$ubi_rootdev -N ubi_rootfs &> /dev/null || true
- ubirmvol /dev/$ubi_rootdev -N fw_hash &> /dev/null || true
-
- ubirmvol /dev/$ubi_propdev -N user_property_ubi &> /dev/null || true
- ubirmvol /dev/$ubi_propdev -N extra_property &> /dev/null || true
-}
-
-# Re-create small dummy ubi_rootfs volume and update
-# fw_hash volume to pass the checking by U-Boot
-# - rootfs (mtd22)
-# - re-create "ubi_rootfs" volume
-# - re-create and update "fw_hash" volume
-# - rootfs_recover (mtd23)
-# - update "fw_hash" volume
-buffalo_upgrade_optvol() {
- local ubi_rootdev ubi_rcvrdev
- local hashvol_root hashvol_rcvr
-
- if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
- ! ubi_rcvrdev="$(nand_attach_ubi rootfs_recover)"; then
- echo "failed to attach UBI volume \"rootfs\" or \"rootfs_recover\", rebooting..."
- reboot -f
- fi
-
- ubimkvol /dev/$ubi_rootdev -N ubi_rootfs -S 1
- ubimkvol /dev/$ubi_rootdev -N fw_hash -S 1 -t static
-
- if ! hashvol_root="$(nand_find_volume $ubi_rootdev fw_hash)" || \
- ! hashvol_rcvr="$(nand_find_volume $ubi_rcvrdev fw_hash)"; then
- echo "\"fw_hash\" volume in \"rootfs\" or \"rootfs_recover\" not found, rebooting..."
- reboot -f
- fi
-
- echo -n "00000000000000000000000000000000" > /tmp/dummyhash.txt
- ubiupdatevol /dev/$hashvol_root /tmp/dummyhash.txt
- ubiupdatevol /dev/$hashvol_rcvr /tmp/dummyhash.txt
-}
+++ /dev/null
-#
-# Copyright (C) 2016 lede-project.org
-#
-
-# this can be used as a generic mmc upgrade script
-# just add a device entry in platform.sh,
-# define "kernelname" and "rootfsname" and call mmc_do_upgrade
-# after the kernel and rootfs flash a loopdev (as overlay) is
-# setup on top of the rootfs partition
-# for the proper function a padded rootfs image is needed, basically
-# append "pad-to 64k" to the image definition
-# this is based on the ipq806x zyxel.sh mmc upgrade
-
-. /lib/functions.sh
-
-mmc_do_upgrade() {
- local tar_file="$1"
- local rootfs=
- local kernel=
-
- [ -z "$kernel" ] && kernel=$(find_mmc_part ${kernelname})
- [ -z "$rootfs" ] && rootfs=$(find_mmc_part ${rootfsname})
-
- [ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
- [ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
-
- mmc_do_flash $tar_file $kernel $rootfs
-
- return 0
-}
-
-mmc_do_flash() {
- local tar_file=$1
- local kernel=$2
- local rootfs=$3
-
- # keep sure its unbound
- losetup --detach-all || {
- echo Failed to detach all loop devices. Skip this try.
- reboot -f
- }
-
- # use the first found directory in the tar archive
- local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
- board_dir=${board_dir%/}
-
- echo "flashing kernel to $kernel"
- tar xf $tar_file ${board_dir}/kernel -O >$kernel
-
- echo "flashing rootfs to ${rootfs}"
- tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
-
- # a padded rootfs is needed for overlay fs creation
- local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
- [ $offset -lt 65536 ] && {
- echo Wrong size for rootfs: $offset
- sleep 10
- reboot -f
- }
-
- # Mount loop for rootfs_data
- local loopdev="$(losetup -f)"
- losetup -o $offset $loopdev $rootfs || {
- echo "Failed to mount looped rootfs_data."
- sleep 10
- reboot -f
- }
-
- echo "Format new rootfs_data at position ${offset}."
- mkfs.ext4 -F -L rootfs_data $loopdev
- mkdir /tmp/new_root
- mount -t ext4 $loopdev /tmp/new_root && {
- echo "Saving config to rootfs_data at position ${offset}."
- cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
- umount /tmp/new_root
- }
-
- # Cleanup
- losetup -d $loopdev >/dev/null 2>&1
- sync
- umount -a
- reboot -f
-}
+++ /dev/null
-PART_NAME=firmware
-REQUIRE_IMAGE_METADATA=1
-
-RAMFS_COPY_BIN='fw_printenv fw_setenv head'
-RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
-
-xiaomi_initramfs_prepare() {
- # Wipe UBI if running initramfs
- [ "$(rootfs_type)" = "tmpfs" ] || return 0
-
- local rootfs_mtdnum="$( find_mtd_index rootfs )"
- if [ ! "$rootfs_mtdnum" ]; then
- echo "unable to find mtd partition rootfs"
- return 1
- fi
-
- local kern_mtdnum="$( find_mtd_index ubi_kernel )"
- if [ ! "$kern_mtdnum" ]; then
- echo "unable to find mtd partition ubi_kernel"
- return 1
- fi
-
- ubidetach -m "$rootfs_mtdnum"
- ubiformat /dev/mtd$rootfs_mtdnum -y
-
- ubidetach -m "$kern_mtdnum"
- ubiformat /dev/mtd$kern_mtdnum -y
-}
-
-platform_check_image() {
- return 0;
-}
-
-platform_pre_upgrade() {
- case "$(board_name)" in
- redmi,ax6|\
- xiaomi,ax3600|\
- xiaomi,ax9000)
- xiaomi_initramfs_prepare
- ;;
- esac
-}
-
-platform_do_upgrade() {
- case "$(board_name)" in
- buffalo,wxr-5950ax12)
- CI_KERN_UBIPART="rootfs"
- CI_ROOT_UBIPART="user_property"
- buffalo_upgrade_prepare
- nand_do_flash_file "$1" || nand_do_upgrade_failed
- nand_do_restore_config || nand_do_upgrade_failed
- buffalo_upgrade_optvol
- ;;
- dynalink,dl-wrx36)
- nand_do_upgrade "$1"
- ;;
- edgecore,eap102)
- active="$(fw_printenv -n active)"
- if [ "$active" -eq "1" ]; then
- CI_UBIPART="rootfs2"
- else
- CI_UBIPART="rootfs1"
- fi
- # force altbootcmd which handles partition change in u-boot
- fw_setenv bootcount 3
- fw_setenv upgrade_available 1
- nand_do_upgrade "$1"
- ;;
- compex,wpq873|\
- edimax,cax1800|\
- netgear,wax218)
- nand_do_upgrade "$1"
- ;;
- prpl,haze|\
- qnap,301w)
- kernelname="0:HLOS"
- rootfsname="rootfs"
- mmc_do_upgrade "$1"
- ;;
- zyxel,nbg7815)
- local config_mtdnum="$(find_mtd_index 0:bootconfig)"
- [ -z "$config_mtdnum" ] && reboot
- part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
- if [ "$part_num" -eq "0" ]; then
- kernelname="0:HLOS"
- rootfsname="rootfs"
- mmc_do_upgrade "$1"
- else
- kernelname="0:HLOS_1"
- rootfsname="rootfs_1"
- mmc_do_upgrade "$1"
- fi
- ;;
- redmi,ax6|\
- xiaomi,ax3600|\
- xiaomi,ax9000)
- # Make sure that UART is enabled
- fw_setenv boot_wait on
- fw_setenv uart_en 1
-
- # Enforce single partition.
- fw_setenv flag_boot_rootfs 0
- fw_setenv flag_last_success 0
- fw_setenv flag_boot_success 1
- fw_setenv flag_try_sys1_failed 8
- fw_setenv flag_try_sys2_failed 8
-
- # Kernel and rootfs are placed in 2 different UBI
- CI_KERN_UBIPART="ubi_kernel"
- CI_ROOT_UBIPART="rootfs"
- nand_do_upgrade "$1"
- ;;
- *)
- default_do_upgrade "$1"
- ;;
- esac
-}
+++ /dev/null
-BOARDNAME:=Generic
+++ /dev/null
-define Device/FitImage
- KERNEL_SUFFIX := -uImage.itb
- KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
- KERNEL_NAME := Image
-endef
-
-define Device/FitImageLzma
- KERNEL_SUFFIX := -uImage.itb
- KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
- KERNEL_NAME := Image
-endef
-
-define Device/EmmcImage
- IMAGES += factory.bin sysupgrade.bin
- IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
- IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
-endef
-
-define Device/UbiFit
- KERNEL_IN_UBI := 1
- IMAGES := factory.ubi sysupgrade.bin
- IMAGE/factory.ubi := append-ubi
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-endef
-
-define Device/buffalo_wxr-5950ax12
- $(call Device/FitImage)
- DEVICE_VENDOR := Buffalo
- DEVICE_MODEL := WXR-5950AX12
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@hk01
- SOC := ipq8074
- IMAGES := sysupgrade.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
-endef
-TARGET_DEVICES += buffalo_wxr-5950ax12
-
-define Device/compex_wpq873
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Compex
- DEVICE_MODEL := WPQ873
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@hk09.wpq873
- SOC := ipq8072
- IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
-endef
-TARGET_DEVICES += compex_wpq873
-
-define Device/dynalink_dl-wrx36
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Dynalink
- DEVICE_MODEL := DL-WRX36
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
- SOC := ipq8072
- DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
-endef
-TARGET_DEVICES += dynalink_dl-wrx36
-
-define Device/edgecore_eap102
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Edgecore
- DEVICE_MODEL := EAP102
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@ac02
- SOC := ipq8071
- DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
- IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
-endef
-TARGET_DEVICES += edgecore_eap102
-
-define Device/edimax_cax1800
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Edimax
- DEVICE_MODEL := CAX1800
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@ac03
- SOC := ipq8070
- DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
-endef
-TARGET_DEVICES += edimax_cax1800
-
-define Device/netgear_wax218
- $(call Device/FitImage)
- $(call Device/UbiFit)
- ARTIFACTS := web-ui-factory.fit
- DEVICE_VENDOR := Netgear
- DEVICE_MODEL := WAX218
- DEVICE_DTS_CONFIG := config@hk07
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- SOC := ipq8072
- ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
- ubinize-kernel | qsdk-ipq-factory-nand
- DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
- ipq-wifi-netgear_wax218
-endef
-TARGET_DEVICES += netgear_wax218
-
-define Device/prpl_haze
- $(call Device/FitImage)
- $(call Device/EmmcImage)
- DEVICE_VENDOR := prpl Foundation
- DEVICE_MODEL := Haze
- DEVICE_DTS_CONFIG := config@hk09
- SOC := ipq8072
- DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
-endef
-TARGET_DEVICES += prpl_haze
-
-define Device/qnap_301w
- $(call Device/FitImage)
- $(call Device/EmmcImage)
- DEVICE_VENDOR := QNAP
- DEVICE_MODEL := 301w
- DEVICE_DTS_CONFIG := config@hk01
- KERNEL_SIZE := 16384k
- SOC := ipq8072
- DEVICE_PACKAGES += ipq-wifi-qnap_301w
-endef
-TARGET_DEVICES += qnap_301w
-
-define Device/redmi_ax6
- $(call Device/xiaomi_ax3600)
- DEVICE_VENDOR := Redmi
- DEVICE_MODEL := AX6
- DEVICE_PACKAGES := ipq-wifi-redmi_ax6
-endef
-TARGET_DEVICES += redmi_ax6
-
-define Device/xiaomi_ax3600
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Xiaomi
- DEVICE_MODEL := AX3600
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@ac04
- SOC := ipq8071
- KERNEL_SIZE := 36608k
- DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- ARTIFACTS := initramfs-factory.ubi
- ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
-endif
-endef
-TARGET_DEVICES += xiaomi_ax3600
-
-define Device/xiaomi_ax9000
- $(call Device/FitImage)
- $(call Device/UbiFit)
- DEVICE_VENDOR := Xiaomi
- DEVICE_MODEL := AX9000
- BLOCKSIZE := 128k
- PAGESIZE := 2048
- DEVICE_DTS_CONFIG := config@hk14
- SOC := ipq8072
- KERNEL_SIZE := 57344k
- DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
- kmod-ath10k-ct ath10k-firmware-qca9887-ct
-ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
- ARTIFACTS := initramfs-factory.ubi
- ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
-endif
-endef
-TARGET_DEVICES += xiaomi_ax9000
-
-define Device/zyxel_nbg7815
- $(call Device/FitImage)
- $(call Device/EmmcImage)
- DEVICE_VENDOR := ZYXEL
- DEVICE_MODEL := NBG7815
- DEVICE_DTS_CONFIG := config@nbg7815
- SOC := ipq8074
- DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci kmod-hwmon-tmp103 \
- kmod-bluetooth
-endef
-TARGET_DEVICES += zyxel_nbg7815
--- /dev/null
+define Device/FitImage
+ KERNEL_SUFFIX := -uImage.itb
+ KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+ KERNEL_NAME := Image
+endef
+
+define Device/FitImageLzma
+ KERNEL_SUFFIX := -uImage.itb
+ KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
+ KERNEL_NAME := Image
+endef
+
+define Device/EmmcImage
+ IMAGES += factory.bin sysupgrade.bin
+ IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
+ IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
+endef
+
+define Device/UbiFit
+ KERNEL_IN_UBI := 1
+ IMAGES := factory.ubi sysupgrade.bin
+ IMAGE/factory.ubi := append-ubi
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/buffalo_wxr-5950ax12
+ $(call Device/FitImage)
+ DEVICE_VENDOR := Buffalo
+ DEVICE_MODEL := WXR-5950AX12
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@hk01
+ SOC := ipq8074
+ IMAGES := sysupgrade.bin
+ IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+ DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
+endef
+TARGET_DEVICES += buffalo_wxr-5950ax12
+
+define Device/compex_wpq873
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Compex
+ DEVICE_MODEL := WPQ873
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@hk09.wpq873
+ SOC := ipq8072
+ IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += compex_wpq873
+
+define Device/dynalink_dl-wrx36
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Dynalink
+ DEVICE_MODEL := DL-WRX36
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
+ SOC := ipq8072
+ DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
+endef
+TARGET_DEVICES += dynalink_dl-wrx36
+
+define Device/edgecore_eap102
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Edgecore
+ DEVICE_MODEL := EAP102
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@ac02
+ SOC := ipq8071
+ DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
+ IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += edgecore_eap102
+
+define Device/edimax_cax1800
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Edimax
+ DEVICE_MODEL := CAX1800
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@ac03
+ SOC := ipq8070
+ DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
+endef
+TARGET_DEVICES += edimax_cax1800
+
+define Device/netgear_wax218
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ ARTIFACTS := web-ui-factory.fit
+ DEVICE_VENDOR := Netgear
+ DEVICE_MODEL := WAX218
+ DEVICE_DTS_CONFIG := config@hk07
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SOC := ipq8072
+ ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
+ ubinize-kernel | qsdk-ipq-factory-nand
+ DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
+ ipq-wifi-netgear_wax218
+endef
+TARGET_DEVICES += netgear_wax218
+
+define Device/prpl_haze
+ $(call Device/FitImage)
+ $(call Device/EmmcImage)
+ DEVICE_VENDOR := prpl Foundation
+ DEVICE_MODEL := Haze
+ DEVICE_DTS_CONFIG := config@hk09
+ SOC := ipq8072
+ DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
+endef
+TARGET_DEVICES += prpl_haze
+
+define Device/qnap_301w
+ $(call Device/FitImage)
+ $(call Device/EmmcImage)
+ DEVICE_VENDOR := QNAP
+ DEVICE_MODEL := 301w
+ DEVICE_DTS_CONFIG := config@hk01
+ KERNEL_SIZE := 16384k
+ SOC := ipq8072
+ DEVICE_PACKAGES += ipq-wifi-qnap_301w
+endef
+TARGET_DEVICES += qnap_301w
+
+define Device/redmi_ax6
+ $(call Device/xiaomi_ax3600)
+ DEVICE_VENDOR := Redmi
+ DEVICE_MODEL := AX6
+ DEVICE_PACKAGES := ipq-wifi-redmi_ax6
+endef
+TARGET_DEVICES += redmi_ax6
+
+define Device/xiaomi_ax3600
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := AX3600
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@ac04
+ SOC := ipq8071
+ KERNEL_SIZE := 36608k
+ DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.ubi
+ ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
+endif
+endef
+TARGET_DEVICES += xiaomi_ax3600
+
+define Device/xiaomi_ax9000
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := Xiaomi
+ DEVICE_MODEL := AX9000
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_DTS_CONFIG := config@hk14
+ SOC := ipq8072
+ KERNEL_SIZE := 57344k
+ DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
+ kmod-ath10k-ct ath10k-firmware-qca9887-ct
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+ ARTIFACTS := initramfs-factory.ubi
+ ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
+endif
+endef
+TARGET_DEVICES += xiaomi_ax9000
+
+define Device/zyxel_nbg7815
+ $(call Device/FitImage)
+ $(call Device/EmmcImage)
+ DEVICE_VENDOR := ZYXEL
+ DEVICE_MODEL := NBG7815
+ DEVICE_DTS_CONFIG := config@nbg7815
+ SOC := ipq8074
+ DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci kmod-hwmon-tmp103 \
+ kmod-bluetooth
+endef
+TARGET_DEVICES += zyxel_nbg7815
--- /dev/null
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+edgecore,eap102)
+ ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
+ ;;
+netgear,wax218)
+ ucidef_set_led_netdev "lan" "LAN" "blue:lan" "lan"
+ ucidef_set_led_wlan "wlan5g" "WIFI 5GHz" "blue:wlan5g" "phy0radio"
+ ucidef_set_led_wlan "wlan2g" "WIFI 2.4GHz" "blue:wlan2g" "phy1radio"
+ ;;
+redmi,ax6|\
+xiaomi,ax3600)
+ ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
+ ;;
+qnap,301w)
+ ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
+ ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
+ ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
+ ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
+ ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
+ ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
--- /dev/null
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq807x_setup_interfaces()
+{
+ local board="$1"
+
+ case "$board" in
+ buffalo,wxr-5950ax12|\
+ dynalink,dl-wrx36|\
+ xiaomi,ax9000)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+ ;;
+ edgecore,eap102)
+ ucidef_set_interfaces_lan_wan "lan" "wan"
+ ;;
+ edimax,cax1800)
+ ucidef_set_interfaces_lan_wan "lan"
+ ;;
+ netgear,wax218)
+ ucidef_set_interface_lan "lan" "dhcp"
+ ;;
+ prpl,haze)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+ ;;
+ qnap,301w)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
+ ;;
+ compex,wpq873|\
+ redmi,ax6|\
+ xiaomi,ax3600)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+ ;;
+ zyxel,nbg7815)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
+ ;;
+ *)
+ echo "Unsupported hardware. Network interfaces not initialized"
+ ;;
+ esac
+}
+
+board_config_update
+board=$(board_name)
+ipq807x_setup_interfaces $board
+board_config_flush
+
+exit 0
--- /dev/null
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
+ case "$board" in
+ buffalo,wxr-5950ax12|\
+ compex,wpq873|\
+ edgecore,eap102|\
+ edimax,cax1800|\
+ dynalink,dl-wrx36|\
+ netgear,wax218|\
+ qnap,301w|\
+ redmi,ax6|\
+ xiaomi,ax3600|\
+ xiaomi,ax9000|\
+ zyxel,nbg7815)
+ caldata_extract "0:art" 0x1000 0x20000
+ ;;
+ prpl,haze)
+ caldata_extract_mmc "0:ART" 0x1000 0x20000
+ ;;
+ esac
+ ;;
+"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
+"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
+ case "$board" in
+ prpl,haze)
+ caldata_extract_mmc "0:ART" 0x26800 0x20000
+ ;;
+ xiaomi,ax9000)
+ caldata_extract "0:art" 0x26800 0x20000
+ ;;
+ esac
+ ;;
+*)
+ exit 1
+ ;;
+esac
--- /dev/null
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+ case $(board_name) in
+ edgecore,eap102)
+ fw_setenv upgrade_available 0
+ # Unset changed flag after sysupgrade complete
+ fw_setenv changed
+ ;;
+ esac
+}
--- /dev/null
+. /lib/functions.sh
+
+# Prepare UBI devices for OpenWrt installation
+# - rootfs (mtd22)
+# - remove "ubi_rootfs" volume (rootfs on stock)
+# - remove "fw_hash" volume (firmware hash)
+# - user_property (mtd24)
+# - remove "user_property_ubi" volume (user configuration)
+# - remove "extra_property" volume (gzipped syslog)
+buffalo_upgrade_prepare() {
+ local ubi_rootdev ubi_propdev
+
+ if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
+ ! ubi_propdev="$(nand_attach_ubi user_property)"; then
+ echo "failed to attach UBI volume \"rootfs\" or \"user_property\", rebooting..."
+ reboot -f
+ fi
+
+ ubirmvol /dev/$ubi_rootdev -N ubi_rootfs &> /dev/null || true
+ ubirmvol /dev/$ubi_rootdev -N fw_hash &> /dev/null || true
+
+ ubirmvol /dev/$ubi_propdev -N user_property_ubi &> /dev/null || true
+ ubirmvol /dev/$ubi_propdev -N extra_property &> /dev/null || true
+}
+
+# Re-create small dummy ubi_rootfs volume and update
+# fw_hash volume to pass the checking by U-Boot
+# - rootfs (mtd22)
+# - re-create "ubi_rootfs" volume
+# - re-create and update "fw_hash" volume
+# - rootfs_recover (mtd23)
+# - update "fw_hash" volume
+buffalo_upgrade_optvol() {
+ local ubi_rootdev ubi_rcvrdev
+ local hashvol_root hashvol_rcvr
+
+ if ! ubi_rootdev="$(nand_attach_ubi rootfs)" || \
+ ! ubi_rcvrdev="$(nand_attach_ubi rootfs_recover)"; then
+ echo "failed to attach UBI volume \"rootfs\" or \"rootfs_recover\", rebooting..."
+ reboot -f
+ fi
+
+ ubimkvol /dev/$ubi_rootdev -N ubi_rootfs -S 1
+ ubimkvol /dev/$ubi_rootdev -N fw_hash -S 1 -t static
+
+ if ! hashvol_root="$(nand_find_volume $ubi_rootdev fw_hash)" || \
+ ! hashvol_rcvr="$(nand_find_volume $ubi_rcvrdev fw_hash)"; then
+ echo "\"fw_hash\" volume in \"rootfs\" or \"rootfs_recover\" not found, rebooting..."
+ reboot -f
+ fi
+
+ echo -n "00000000000000000000000000000000" > /tmp/dummyhash.txt
+ ubiupdatevol /dev/$hashvol_root /tmp/dummyhash.txt
+ ubiupdatevol /dev/$hashvol_rcvr /tmp/dummyhash.txt
+}
--- /dev/null
+#
+# Copyright (C) 2016 lede-project.org
+#
+
+# this can be used as a generic mmc upgrade script
+# just add a device entry in platform.sh,
+# define "kernelname" and "rootfsname" and call mmc_do_upgrade
+# after the kernel and rootfs flash a loopdev (as overlay) is
+# setup on top of the rootfs partition
+# for the proper function a padded rootfs image is needed, basically
+# append "pad-to 64k" to the image definition
+# this is based on the ipq806x zyxel.sh mmc upgrade
+
+. /lib/functions.sh
+
+mmc_do_upgrade() {
+ local tar_file="$1"
+ local rootfs=
+ local kernel=
+
+ [ -z "$kernel" ] && kernel=$(find_mmc_part ${kernelname})
+ [ -z "$rootfs" ] && rootfs=$(find_mmc_part ${rootfsname})
+
+ [ -z "$kernel" ] && echo "Upgrade failed: kernel partition not found! Rebooting..." && reboot -f
+ [ -z "$rootfs" ] && echo "Upgrade failed: rootfs partition not found! Rebooting..." && reboot -f
+
+ mmc_do_flash $tar_file $kernel $rootfs
+
+ return 0
+}
+
+mmc_do_flash() {
+ local tar_file=$1
+ local kernel=$2
+ local rootfs=$3
+
+ # keep sure its unbound
+ losetup --detach-all || {
+ echo Failed to detach all loop devices. Skip this try.
+ reboot -f
+ }
+
+ # use the first found directory in the tar archive
+ local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+ board_dir=${board_dir%/}
+
+ echo "flashing kernel to $kernel"
+ tar xf $tar_file ${board_dir}/kernel -O >$kernel
+
+ echo "flashing rootfs to ${rootfs}"
+ tar xf $tar_file ${board_dir}/root -O >"${rootfs}"
+
+ # a padded rootfs is needed for overlay fs creation
+ local offset=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+ [ $offset -lt 65536 ] && {
+ echo Wrong size for rootfs: $offset
+ sleep 10
+ reboot -f
+ }
+
+ # Mount loop for rootfs_data
+ local loopdev="$(losetup -f)"
+ losetup -o $offset $loopdev $rootfs || {
+ echo "Failed to mount looped rootfs_data."
+ sleep 10
+ reboot -f
+ }
+
+ echo "Format new rootfs_data at position ${offset}."
+ mkfs.ext4 -F -L rootfs_data $loopdev
+ mkdir /tmp/new_root
+ mount -t ext4 $loopdev /tmp/new_root && {
+ echo "Saving config to rootfs_data at position ${offset}."
+ cp -v "$UPGRADE_BACKUP" "/tmp/new_root/$BACKUP_FILE"
+ umount /tmp/new_root
+ }
+
+ # Cleanup
+ losetup -d $loopdev >/dev/null 2>&1
+ sync
+ umount -a
+ reboot -f
+}
--- /dev/null
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv head'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+xiaomi_initramfs_prepare() {
+ # Wipe UBI if running initramfs
+ [ "$(rootfs_type)" = "tmpfs" ] || return 0
+
+ local rootfs_mtdnum="$( find_mtd_index rootfs )"
+ if [ ! "$rootfs_mtdnum" ]; then
+ echo "unable to find mtd partition rootfs"
+ return 1
+ fi
+
+ local kern_mtdnum="$( find_mtd_index ubi_kernel )"
+ if [ ! "$kern_mtdnum" ]; then
+ echo "unable to find mtd partition ubi_kernel"
+ return 1
+ fi
+
+ ubidetach -m "$rootfs_mtdnum"
+ ubiformat /dev/mtd$rootfs_mtdnum -y
+
+ ubidetach -m "$kern_mtdnum"
+ ubiformat /dev/mtd$kern_mtdnum -y
+}
+
+platform_check_image() {
+ return 0;
+}
+
+platform_pre_upgrade() {
+ case "$(board_name)" in
+ redmi,ax6|\
+ xiaomi,ax3600|\
+ xiaomi,ax9000)
+ xiaomi_initramfs_prepare
+ ;;
+ esac
+}
+
+platform_do_upgrade() {
+ case "$(board_name)" in
+ buffalo,wxr-5950ax12)
+ CI_KERN_UBIPART="rootfs"
+ CI_ROOT_UBIPART="user_property"
+ buffalo_upgrade_prepare
+ nand_do_flash_file "$1" || nand_do_upgrade_failed
+ nand_do_restore_config || nand_do_upgrade_failed
+ buffalo_upgrade_optvol
+ ;;
+ dynalink,dl-wrx36)
+ nand_do_upgrade "$1"
+ ;;
+ edgecore,eap102)
+ active="$(fw_printenv -n active)"
+ if [ "$active" -eq "1" ]; then
+ CI_UBIPART="rootfs2"
+ else
+ CI_UBIPART="rootfs1"
+ fi
+ # force altbootcmd which handles partition change in u-boot
+ fw_setenv bootcount 3
+ fw_setenv upgrade_available 1
+ nand_do_upgrade "$1"
+ ;;
+ compex,wpq873|\
+ edimax,cax1800|\
+ netgear,wax218)
+ nand_do_upgrade "$1"
+ ;;
+ prpl,haze|\
+ qnap,301w)
+ kernelname="0:HLOS"
+ rootfsname="rootfs"
+ mmc_do_upgrade "$1"
+ ;;
+ zyxel,nbg7815)
+ local config_mtdnum="$(find_mtd_index 0:bootconfig)"
+ [ -z "$config_mtdnum" ] && reboot
+ part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
+ if [ "$part_num" -eq "0" ]; then
+ kernelname="0:HLOS"
+ rootfsname="rootfs"
+ mmc_do_upgrade "$1"
+ else
+ kernelname="0:HLOS_1"
+ rootfsname="rootfs_1"
+ mmc_do_upgrade "$1"
+ fi
+ ;;
+ redmi,ax6|\
+ xiaomi,ax3600|\
+ xiaomi,ax9000)
+ # Make sure that UART is enabled
+ fw_setenv boot_wait on
+ fw_setenv uart_en 1
+
+ # Enforce single partition.
+ fw_setenv flag_boot_rootfs 0
+ fw_setenv flag_last_success 0
+ fw_setenv flag_boot_success 1
+ fw_setenv flag_try_sys1_failed 8
+ fw_setenv flag_try_sys2_failed 8
+
+ # Kernel and rootfs are placed in 2 different UBI
+ CI_KERN_UBIPART="ubi_kernel"
+ CI_ROOT_UBIPART="rootfs"
+ nand_do_upgrade "$1"
+ ;;
+ *)
+ default_do_upgrade "$1"
+ ;;
+ esac
+}
--- /dev/null
+SUBTARGET:=ipq807x
+BOARDNAME:=Qualcomm Atheros IPQ807x
+DEFAULT_PACKAGES += kmod-phy-aquantia ath11k-firmware-ipq8074
+
+define Target/Description
+ Build firmware images for Qualcomm Atheros IPQ807x based boards.
+endef
projects / openwrt / staging / jow.git / commitdiff