realtek: fix addresses in DT node names

Mostly wrong address format, one missing address, and one spurious
address suffix.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
[amend commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>

diff --git a/target/linux/realtek/dts-5.15/rtl838x_hpe_1920.dtsi b/target/linux/realtek/dts-5.15/rtl838x_hpe_1920.dtsi
index e18f61345ea38a6637642ff5c334e4f06f561c31..c7b601311751c78d3630ff559d877f1551c6ff09 100644 (file)
--- a/target/linux/realtek/dts-5.15/rtl838x_hpe_1920.dtsi
+++ b/target/linux/realtek/dts-5.15/rtl838x_hpe_1920.dtsi
@@ -50,43 +50,43 @@
                                read-only;
                        };
 
-                       partition@0x60000 {
+                       partition@60000 {
                                label = "bootware_data";
                                reg = <0x60000 0x30000>;
                                read-only;
                        };
 
-                       partition@0x90000 {
+                       partition@90000 {
                                label = "bootware_extend";
                                reg = <0x90000 0x40000>;
                                read-only;
                        };
 
-                       partition@0x100000 {
+                       partition@100000 {
                                label = "bootware_basic_backup";
                                reg = <0x100000 0x50000>;
                                read-only;
                        };
 
-                       partition@0x160000 {
+                       partition@160000 {
                                label = "bootware_data_backup";
                                reg = <0x160000 0x30000>;
                                read-only;
                        };
 
-                       partition@0x190000 {
+                       partition@190000 {
                                label = "bootware_extend_backup";
                                reg = <0x190000 0x40000>;
                                read-only;
                        };
 
-                       partition@0x300000 {
+                       partition@300000 {
                                label = "firmware";
                                compatible = "h3c,vfs-firmware";
                                reg = <0x300000 0x1cf0000>;
                        };
 
-                       partition@0x1ff0000 {
+                       partition@1ff0000 {
                                label = "factory";
                                reg = <0x1ff0000 0x10000>;
                                read-only;

diff --git a/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts b/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts
index a9821b2cc6201003443cde2908dc9caa769623da..0fe8f1997ea904eb60d85a25898656876391235c 100644 (file)
--- a/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts
+++ b/target/linux/realtek/dts-5.15/rtl9302_zyxel_xgs1250-12.dts
@@ -29,7 +29,7 @@
        };
 
        /* i2c of the SFP cage: port 12 */
-       i2c0: i2c-rtl9300 {
+       i2c0: i2c-rtl9300@1b00036c {
                compatible = "realtek,rtl9300-i2c";
                reg = <0x1b00036c 0x3c>;
                #address-cells = <1>;
@@ -62,7 +62,7 @@
                tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
        };
 
-       led_set: led_set@0 {
+       led_set: led_set {
                compatible = "realtek,rtl9300-leds";
                active-low;