target/linux/ramips/dts/rt3050_tenda_w150m.dts

   1 #include "rt3050.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "tenda,w150m", "ralink,rt3050-soc";
   8         model = "Tenda W150M";
   9
  10         aliases {
  11                 led-boot = &led_ap;
  12                 led-failsafe = &led_ap;
  13                 led-running = &led_ap;
  14                 led-upgrade = &led_ap;
  15         };
  16
  17         flash@1f000000 {
  18                 compatible = "cfi-flash";
  19                 reg = <0x1f000000 0x800000>;
  20                 bank-width = <2>;
  21                 device-width = <2>;
  22
  23                 partitions {
  24                         compatible = "fixed-partitions";
  25                         #address-cells = <1>;
  26                         #size-cells = <1>;
  27
  28                         partition@0 {
  29                                 label = "u-boot";
  30                                 reg = <0x0 0x30000>;
  31                                 read-only;
  32                         };
  33
  34                         partition@30000 {
  35                                 label = "u-boot-env";
  36                                 reg = <0x30000 0x10000>;
  37                                 read-only;
  38                         };
  39
  40                         factory: partition@40000 {
  41                                 label = "factory";
  42                                 reg = <0x40000 0x10000>;
  43                                 read-only;
  44
  45                                 nvmem-layout {
  46                                         compatible = "fixed-layout";
  47                                         #address-cells = <1>;
  48                                         #size-cells = <1>;
  49
  50                                         eeprom_factory_0: eeprom@0 {
  51                                                 reg = <0x0 0x200>;
  52                                         };
  53
  54                                         macaddr_factory_4: macaddr@4 {
  55                                                 reg = <0x4 0x6>;
  56                                         };
  57                                 };
  58                         };
  59
  60                         partition@50000 {
  61                                 compatible = "denx,uimage";
  62                                 label = "firmware";
  63                                 reg = <0x50000 0x3b0000>;
  64                         };
  65                 };
  66         };
  67
  68         leds {
  69                 compatible = "gpio-leds";
  70
  71                 3grouter {
  72                         label = "blue:3grouter";
  73                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  74                 };
  75
  76                 led_ap: ap {
  77                         label = "blue:ap";
  78                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  79                 };
  80
  81                 wisprouter {
  82                         label = "blue:wisprouter";
  83                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 wirelessrouter {
  87                         label = "blue:wirelessrouter";
  88                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  89                 };
  90
  91                 3g {
  92                         label = "blue:3g";
  93                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 wpsreset {
  97                         label = "blue:wpsreset";
  98                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  99                 };
 100         };
 101
 102         keys {
 103                 compatible = "gpio-keys-polled";
 104                 poll-interval = <20>;
 105
 106                 reset {
 107                         label = "reset";
 108                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_RESTART>;
 110                 };
 111
 112                 mode {
 113                         label = "mode";
 114                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 115                         linux,code = <BTN_0>;
 116                 };
 117         };
 118 };
 119
 120 &state_default {
 121         gpio {
 122                 groups = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 123                 function = "gpio";
 124         };
 125 };
 126
 127 &ethernet {
 128         nvmem-cells = <&macaddr_factory_4>;
 129         nvmem-cell-names = "mac-address";
 130 };
 131
 132 &esw {
 133         mediatek,portmap = <0x2f>;
 134 };
 135
 136 &wmac {
 137         nvmem-cells = <&eeprom_factory_0>;
 138         nvmem-cell-names = "eeprom";
 139 };