target/linux/ramips/dts/mt7628an_keenetic_kn-1613.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 #include "mt7628an.dtsi"
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/leds/common.h>
   7
   8 / {
   9         compatible = "keenetic,kn-1613", "mediatek,mt7628an-soc";
  10         model = "Keenetic KN-1613";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power: power {
  27                         function = LED_FUNCTION_POWER;
  28                         color = <LED_COLOR_ID_GREEN>;
  29                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 internet {
  33                         label = "green:internet";
  34                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 wifi2 {
  38                         label = "green:wifi2";
  39                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "phy0tpt";
  41                 };
  42
  43                 wifi5 {
  44                         label = "green:wifi5";
  45                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  46                         linux,default-trigger = "phy1tpt";
  47                 };
  48         };
  49
  50         keys {
  51                 compatible = "gpio-keys";
  52
  53                 fn {
  54                         label = "fn";
  55                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  56                         linux,code = <BTN_0>;
  57                 };
  58
  59                 reset {
  60                         label = "reset";
  61                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  62                         linux,code = <KEY_RESTART>;
  63                 };
  64
  65                 wps {
  66                         label = "wps";
  67                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
  68                         linux,code = <KEY_WPS_BUTTON>;
  69                 };
  70         };
  71
  72         virtual_flash {
  73                 compatible = "mtd-concat";
  74                 devices = <&firmware1 &firmware2>;
  75
  76                 partitions {
  77                         compatible = "fixed-partitions";
  78                         #address-cells = <1>;
  79                         #size-cells = <1>;
  80
  81                         partition@0 {
  82                                 compatible = "denx,uimage";
  83                                 label = "firmware";
  84                                 reg = <0x0 0x1ec0000>;
  85                         };
  86                 };
  87         };
  88 };
  89
  90 &state_default {
  91         gpio {
  92                 groups = "i2s", "i2c", "gpio", "refclk", "wdt", "wled_an";
  93                 function = "gpio";
  94         };
  95 };
  96
  97 &usbphy {
  98         status = "disabled";
  99 };
 100
 101 &ehci {
 102         status = "disabled";
 103 };
 104
 105 &ohci {
 106         status = "disabled";
 107 };
 108
 109 &spi0 {
 110         status = "okay";
 111
 112         flash@0 {
 113                 compatible = "jedec,spi-nor";
 114                 reg = <0>;
 115                 spi-max-frequency = <32000000>;
 116
 117                 partitions {
 118                         compatible = "fixed-partitions";
 119                         #address-cells = <1>;
 120                         #size-cells = <1>;
 121
 122                         partition@0 {
 123                                 label = "u-boot";
 124                                 reg = <0x0 0x30000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@30000 {
 129                                 label = "u-config";
 130                                 reg = <0x30000 0x10000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@40000 {
 135                                 label = "rf-eeprom";
 136                                 reg = <0x40000 0x10000>;
 137                                 read-only;
 138
 139                                 nvmem-layout {
 140                                         compatible = "fixed-layout";
 141                                         #address-cells = <1>;
 142                                         #size-cells = <1>;
 143
 144                                         eeprom_factory_0: eeprom@0 {
 145                                                 reg = <0x0 0x400>;
 146                                         };
 147
 148                                         eeprom_factory_400: eeprom@400 {
 149                                                 reg = <0x400 0x4da8>;
 150                                         };
 151
 152                                         macaddr_factory_4: macaddr@4 {
 153                                                 reg = <0x4 0x6>;
 154                                         };
 155                                 };
 156                         };
 157
 158                         firmware1: partition@50000 {
 159                                 label = "firmware_1";
 160                                 reg = <0x50000 0xf60000>;
 161                         };
 162
 163                         partition@fb0000 {
 164                                 label = "config_1";
 165                                 reg = <0xfb0000 0x40000>;
 166                                 read-only;
 167                         };
 168
 169                         partition@ff0000 {
 170                                 label = "dump";
 171                                 reg = <0xff0000 0x10000>;
 172                                 read-only;
 173                         };
 174
 175                         partition@1000000 {
 176                                 label = "u-state";
 177                                 reg = <0x1000000 0x30000>;
 178                                 read-only;
 179                         };
 180
 181                         partition@1030000 {
 182                                 label = "u-config_res";
 183                                 reg = <0x1030000 0x10000>;
 184                                 read-only;
 185                         };
 186
 187                         partition@1040000 {
 188                                 label = "rf-eeprom_res";
 189                                 reg = <0x1040000 0x10000>;
 190                                 read-only;
 191                         };
 192
 193                         firmware2: partition@1050000 {
 194                                 label = "firmware_2";
 195                                 reg = <0x1050000 0xf60000>;
 196                         };
 197
 198                         partition@1fb0000 {
 199                                 label = "config_2";
 200                                 reg = <0x1fb0000 0x40000>;
 201                                 read-only;
 202                         };
 203                 };
 204         };
 205 };
 206
 207 &ethernet {
 208         nvmem-cells = <&macaddr_factory_4>;
 209         nvmem-cell-names = "mac-address";
 210 };
 211
 212 &esw {
 213         mediatek,portmap = <0x3e>;
 214 };
 215
 216 &wmac {
 217         status = "okay";
 218
 219         nvmem-cells = <&eeprom_factory_0>;
 220         nvmem-cell-names = "eeprom";
 221 };
 222
 223 &pcie {
 224         status = "okay";
 225 };
 226
 227 &pcie0 {
 228         wifi@0,0 {
 229                 compatible = "mediatek,mt76";
 230                 reg = <0x0000 0 0 0 0>;
 231                 nvmem-cells = <&eeprom_factory_400>;
 232                 nvmem-cell-names = "eeprom";
 233                 ieee80211-freq-limit = <5000000 6000000>;
 234         };
 235 };