target/linux/ramips/dts/mt7621_youku_yk-l2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "youku,yk-l2", "mediatek,mt7621-soc";
  10         model = "Youku YK-L2";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_wps;
  17         };
  18
  19         chosen {
  20                 bootargs = "console=ttyS0,115200";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25
  26                 led_power: power {
  27                         label = "blue:power";
  28                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  29                         default-state = "on";
  30                 };
  31
  32                 led_wps: wps {
  33                         label = "blue:wps";
  34                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 usb {
  38                         label = "blue:usb";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                         trigger-sources = <&xhci_ehci_port1>, <&ehci_port2>;
  41                         linux,default-trigger = "usbport";
  42                 };
  43         };
  44
  45         keys {
  46                 compatible = "gpio-keys";
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 wps {
  55                         label = "wps";
  56                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  57                         linux,code = <KEY_WPS_BUTTON>;
  58                 };
  59         };
  60 };
  61
  62 &sdhci {
  63         status = "okay";
  64 };
  65
  66 &spi0 {
  67         status = "okay";
  68
  69         flash@0 {
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <10000000>;
  73
  74                 partitions {
  75                         compatible = "fixed-partitions";
  76                         #address-cells = <1>;
  77                         #size-cells = <1>;
  78
  79                         partition@0 {
  80                                 label = "u-boot";
  81                                 reg = <0x0 0x30000>;
  82                                 read-only;
  83                         };
  84
  85                         partition@30000 {
  86                                 label = "u-boot-env";
  87                                 reg = <0x30000 0x10000>;
  88                                 read-only;
  89                         };
  90
  91                         factory: partition@40000 {
  92                                 label = "factory";
  93                                 reg = <0x40000 0x10000>;
  94                                 read-only;
  95
  96                                 nvmem-layout {
  97                                         compatible = "fixed-layout";
  98                                         #address-cells = <1>;
  99                                         #size-cells = <1>;
 100
 101                                         eeprom_factory_0: eeprom@0 {
 102                                                 reg = <0x0 0x400>;
 103                                         };
 104
 105                                         eeprom_factory_8000: eeprom@8000 {
 106                                                 reg = <0x8000 0x200>;
 107                                         };
 108
 109                                         macaddr_factory_e000: macaddr@e000 {
 110                                                 reg = <0xe000 0x6>;
 111                                         };
 112
 113                                         macaddr_factory_e006: macaddr@e006 {
 114                                                 reg = <0xe006 0x6>;
 115                                         };
 116                                 };
 117                         };
 118
 119                         partition@50000 {
 120                                 compatible = "openwrt,uimage", "denx,uimage";
 121                                 label = "firmware";
 122                                 openwrt,ih-magic = <0x12291000>;
 123                                 reg = <0x50000 0xfb0000>;
 124                         };
 125                 };
 126         };
 127 };
 128
 129 &pcie {
 130         status = "okay";
 131 };
 132
 133 &pcie0 {
 134         wifi@0,0 {
 135                 compatible = "pci14c3,7603";
 136                 reg = <0x0000 0 0 0 0>;
 137                 nvmem-cells = <&eeprom_factory_0>;
 138                 nvmem-cell-names = "eeprom";
 139                 ieee80211-freq-limit = <2400000 2500000>;
 140                 led {
 141                         led-active-low;
 142                 };
 143         };
 144 };
 145
 146 &pcie1 {
 147         wifi@0,0 {
 148                 compatible = "pci14c3,7662";
 149                 reg = <0x0000 0 0 0 0>;
 150                 nvmem-cells = <&eeprom_factory_8000>;
 151                 nvmem-cell-names = "eeprom";
 152                 ieee80211-freq-limit = <5000000 6000000>;
 153                 led {
 154                         led-sources = <2>;
 155                         led-active-low;
 156                 };
 157         };
 158 };
 159
 160 &gmac0 {
 161         nvmem-cells = <&macaddr_factory_e000>;
 162         nvmem-cell-names = "mac-address";
 163 };
 164
 165 &gmac1 {
 166         status = "okay";
 167         label = "wan";
 168         phy-handle = <&ethphy4>;
 169
 170         nvmem-cells = <&macaddr_factory_e006>;
 171         nvmem-cell-names = "mac-address";
 172 };
 173
 174 &mdio {
 175         ethphy4: ethernet-phy@4 {
 176                 reg = <4>;
 177         };
 178 };
 179
 180 &switch0 {
 181         ports {
 182                 port@0 {
 183                         status = "okay";
 184                         label = "lan1";
 185                 };
 186
 187                 port@1 {
 188                         status = "okay";
 189                         label = "lan2";
 190                 };
 191
 192                 port@2 {
 193                         status = "okay";
 194                         label = "lan3";
 195                 };
 196
 197                 port@3 {
 198                         status = "okay";
 199                         label = "lan4";
 200                 };
 201         };
 202 };
 203
 204 &state_default {
 205         gpio {
 206                 groups = "jtag", "wdt";
 207                 function = "gpio";
 208         };
 209 };