target/linux/ramips/dts/mt7621_lenovo_newifi-d1.dts

   1 #include "mt7621.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "lenovo,newifi-d1", "mediatek,mt7621-soc";
   8         model = "Lenovo Newifi D1";
   9
  10         aliases {
  11                 led-boot = &led_blue;
  12                 led-failsafe = &led_blue;
  13                 led-running = &led_blue;
  14                 led-upgrade = &led_blue;
  15                 label-mac-device = &gmac0;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200";
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 status-red {
  26                         label = "red:status";
  27                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 status-green {
  31                         label = "green:status";
  32                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 led_blue: status-blue {
  36                         label = "blue:status";
  37                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  38                         default-state = "on";
  39                 };
  40         };
  41
  42         keys {
  43                 compatible = "gpio-keys";
  44
  45                 reset {
  46                         label = "reset";
  47                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_RESTART>;
  49                 };
  50
  51                 wps {
  52                         label = "wps";
  53                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  54                         linux,code = <KEY_WPS_BUTTON>;
  55                 };
  56         };
  57
  58         gpio_export {
  59                 compatible = "gpio-export";
  60                 #size-cells = <0>;
  61
  62                 usb2power {
  63                         gpio-export,name = "usb2power";
  64                         gpio-export,output = <1>;
  65                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  66                 };
  67
  68                 usb3power {
  69                         gpio-export,name = "usb3power";
  70                         gpio-export,output = <1>;
  71                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  72                 };
  73         };
  74 };
  75
  76 &sdhci {
  77         status = "okay";
  78 };
  79
  80 &spi0 {
  81         status = "okay";
  82
  83         flash@0 {
  84                 compatible = "jedec,spi-nor";
  85                 reg = <0>;
  86                 spi-max-frequency = <45000000>;
  87                 broken-flash-reset;
  88
  89                 partitions {
  90                         compatible = "fixed-partitions";
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93
  94                         partition@0 {
  95                                 label = "u-boot";
  96                                 reg = <0x0 0x30000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@30000 {
 101                                 label = "u-boot-env";
 102                                 reg = <0x30000 0x10000>;
 103                                 read-only;
 104                         };
 105
 106                         factory: partition@40000 {
 107                                 label = "factory";
 108                                 reg = <0x40000 0x10000>;
 109                                 read-only;
 110
 111                                 nvmem-layout {
 112                                         compatible = "fixed-layout";
 113                                         #address-cells = <1>;
 114                                         #size-cells = <1>;
 115
 116                                         eeprom_factory_0: eeprom@0 {
 117                                                 reg = <0x0 0x400>;
 118                                         };
 119
 120                                         eeprom_factory_8000: eeprom@8000 {
 121                                                 reg = <0x8000 0x200>;
 122                                         };
 123
 124                                         macaddr_factory_e000: macaddr@e000 {
 125                                                 reg = <0xe000 0x6>;
 126                                         };
 127
 128                                         macaddr_factory_e006: macaddr@e006 {
 129                                                 reg = <0xe006 0x6>;
 130                                         };
 131                                 };
 132                         };
 133
 134                         partition@50000 {
 135                                 compatible = "denx,uimage";
 136                                 label = "firmware";
 137                                 reg = <0x50000 0x1fb0000>;
 138                         };
 139                 };
 140         };
 141 };
 142
 143 &pcie {
 144         status = "okay";
 145 };
 146
 147 &pcie0 {
 148         mt76@0,0 {
 149                 reg = <0x0000 0 0 0 0>;
 150                 nvmem-cells = <&eeprom_factory_8000>;
 151                 nvmem-cell-names = "eeprom";
 152                 ieee80211-freq-limit = <5000000 6000000>;
 153         };
 154 };
 155
 156 &pcie1 {
 157         mt76@0,0 {
 158                 reg = <0x0000 0 0 0 0>;
 159                 nvmem-cells = <&eeprom_factory_0>;
 160                 nvmem-cell-names = "eeprom";
 161         };
 162 };
 163
 164 &gmac0 {
 165         nvmem-cells = <&macaddr_factory_e000>;
 166         nvmem-cell-names = "mac-address";
 167 };
 168
 169 &gmac1 {
 170         status = "okay";
 171         label = "wan";
 172         phy-handle = <&ethphy4>;
 173
 174         nvmem-cells = <&macaddr_factory_e006>;
 175         nvmem-cell-names = "mac-address";
 176 };
 177
 178 &mdio {
 179         ethphy4: ethernet-phy@4 {
 180                 reg = <4>;
 181         };
 182 };
 183
 184 &switch0 {
 185         ports {
 186                 port@1 {
 187                         status = "okay";
 188                         label = "lan2";
 189                 };
 190
 191                 port@2 {
 192                         status = "okay";
 193                         label = "lan1";
 194                 };
 195         };
 196 };
 197
 198 &state_default {
 199         gpio {
 200                 groups = "jtag", "uart2", "wdt";
 201                 function = "gpio";
 202         };
 203 };