target/linux/ramips/dts/mt7621_etisalat_s3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "mt7621.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/leds/common.h>
   8
   9 / {
  10         compatible = "etisalat,s3", "mediatek,mt7621-soc";
  11         model = "Etisalat S3";
  12
  13         aliases {
  14                 label-mac-device = &gmac0;
  15
  16                 led-boot = &led_status_green;
  17                 led-failsafe = &led_status_red;
  18                 led-running = &led_status_green;
  19                 led-upgrade = &led_status_red;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 led-0 {
  26                         label = "blue:wan";
  27                         color = <LED_COLOR_ID_BLUE>;
  28                         function = LED_FUNCTION_WAN;
  29                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  30                 };
  31
  32                 led_status_green: led-1 {
  33                         label = "green:status";
  34                         color = <LED_COLOR_ID_GREEN>;
  35                         function = LED_FUNCTION_STATUS;
  36                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  37                 };
  38
  39                 led_status_red: led-2 {
  40                         label = "red:status";
  41                         color = <LED_COLOR_ID_RED>;
  42                         function = LED_FUNCTION_STATUS;
  43                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  44                 };
  45         };
  46
  47         keys {
  48                 compatible = "gpio-keys";
  49
  50                 wps {
  51                         label = "wps";
  52                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  53                         linux,code = <KEY_WPS_BUTTON>;
  54                 };
  55
  56                 reset {
  57                         label = "reset";
  58                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  59                         linux,code = <KEY_RESTART>;
  60                 };
  61         };
  62
  63         ubi-concat {
  64                 compatible = "mtd-concat";
  65                 devices = <&ubiconcat0 &ubiconcat1 &ubiconcat2>;
  66
  67                 partitions {
  68                         compatible = "fixed-partitions";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71
  72                         partition@0 {
  73                                 label = "ubi";
  74                                 reg = <0x0 0x4f80000>;
  75                         };
  76                 };
  77         };
  78 };
  79
  80 &nand {
  81         status = "okay";
  82
  83         partitions {
  84                 compatible = "sercomm,sc-partitions", "fixed-partitions";
  85                 #address-cells = <1>;
  86                 #size-cells = <1>;
  87
  88                 partition@0 {
  89                         label = "u-boot";
  90                         reg = <0x0 0x100000>;
  91                         sercomm,scpart-id = <0>;
  92                         read-only;
  93                 };
  94
  95                 partition@100000 {
  96                         label = "dynamic partition map";
  97                         reg = <0x100000 0x100000>;
  98                         sercomm,scpart-id = <1>;
  99                         read-only;
 100                 };
 101
 102                 factory: partition@200000 {
 103                         label = "Factory";
 104                         reg = <0x200000 0x100000>;
 105                         sercomm,scpart-id = <2>;
 106                         read-only;
 107
 108                         nvmem-layout {
 109                                 compatible = "fixed-layout";
 110                                 #address-cells = <1>;
 111                                 #size-cells = <1>;
 112
 113                                 eeprom_factory_0: eeprom@0 {
 114                                         reg = <0x0 0x400>;
 115                                 };
 116
 117                                 eeprom_factory_8000: eeprom@8000 {
 118                                         reg = <0x8000 0x4da8>;
 119                                 };
 120
 121                                 macaddr_factory_21000: macaddr@21000 {
 122                                         compatible = "mac-base";
 123                                         reg = <0x21000 0x6>;
 124                                         #nvmem-cell-cells = <1>;
 125                                 };
 126                         };
 127                 };
 128
 129                 partition@300000 {
 130                         label = "Boot Flag";
 131                         reg = <0x300000 0x100000>;
 132                         sercomm,scpart-id = <3>;
 133                 };
 134
 135                 partition@400000 {
 136                         label = "kernel";
 137                         reg = <0x400000 0x600000>;
 138                         sercomm,scpart-id = <4>;
 139                 };
 140
 141                 partition@a00000 {
 142                         label = "Kernel 2";
 143                         reg = <0xa00000 0x600000>;
 144                         sercomm,scpart-id = <5>;
 145                         read-only;
 146                 };
 147
 148                 ubiconcat0: partition@1000000 {
 149                         label = "File System 1";
 150                         reg = <0x1000000 0x2000000>;
 151                         sercomm,scpart-id = <6>;
 152                 };
 153
 154                 partition@3000000 {
 155                         label = "File System 2";
 156                         reg = <0x3000000 0x2000000>;
 157                         sercomm,scpart-id = <7>;
 158                         read-only;
 159                 };
 160
 161                 ubiconcat1: partition@5000000 {
 162                         label = "Configuration/log";
 163                         reg = <0x5000000 0x1400000>;
 164                         sercomm,scpart-id = <8>;
 165                 };
 166
 167                 ubiconcat2: partition@6400000 {
 168                         label = "application tmp buffer (Ftool)";
 169                         reg = <0x6400000 0x1b80000>;
 170                         sercomm,scpart-id = <9>;
 171                 };
 172         };
 173 };
 174
 175 &pcie {
 176         status = "okay";
 177 };
 178
 179 &pcie0 {
 180         wifi@0,0 {
 181                 compatible = "mediatek,mt76";
 182                 reg = <0x0000 0 0 0 0>;
 183                 ieee80211-freq-limit = <5000000 6000000>;
 184
 185                 nvmem-cells = <&eeprom_factory_8000>, <&macaddr_factory_21000 3>;
 186                 nvmem-cell-names = "eeprom", "mac-address";
 187         };
 188 };
 189
 190 &pcie1 {
 191         wifi@0,0 {
 192                 compatible = "mediatek,mt76";
 193                 reg = <0x0000 0 0 0 0>;
 194                 ieee80211-freq-limit = <2400000 2500000>;
 195
 196                 nvmem-cells = <&eeprom_factory_0>, <&macaddr_factory_21000 2>;
 197                 nvmem-cell-names = "eeprom", "mac-address";
 198         };
 199 };
 200
 201 &gmac0 {
 202         nvmem-cells = <&macaddr_factory_21000 0>;
 203         nvmem-cell-names = "mac-address";
 204 };
 205
 206 &gmac1 {
 207         status = "okay";
 208         label = "wan";
 209         phy-handle = <&ethphy0>;
 210
 211         nvmem-cells = <&macaddr_factory_21000 11>;
 212         nvmem-cell-names = "mac-address";
 213 };
 214
 215 &mdio {
 216         ethphy0: ethernet-phy@0 {
 217                 reg = <0>;
 218         };
 219 };
 220
 221 &switch0 {
 222         ports {
 223                 port@1 {
 224                         status = "okay";
 225                         label = "lan1";
 226                 };
 227
 228                 port@2 {
 229                         status = "okay";
 230                         label = "lan2";
 231                 };
 232
 233                 port@3 {
 234                         status = "okay";
 235                         label = "lan3";
 236                 };
 237
 238                 port@4 {
 239                         status = "okay";
 240                         label = "lan4";
 241                 };
 242         };
 243 };
 244
 245 &uartlite3 {
 246         status = "okay";
 247 };
 248
 249 &state_default {
 250         gpio {
 251                 groups = "i2c", "jtag";
 252                 function = "gpio";
 253         };
 254 };